TRAYNOR XM200 User Manual
xm
200
xm
200
T
OWNER’S MANUAL
MANUEL de L’UTILISATEUR
TYPE: 200B
Manual-Owners-xm200-1v4.pdf
INSTRUCTIONS PERTAINING TO A RISK
OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Read Instructions:
The
Owner’s Manual
should be read and understood
before operation of your unit. Please, save these
instructions for future reference.
Packaging:
Keep the box and packaging materials, in case the unit
needs to be returned for service.
Warning:
When using electric products, basic precautions should
always be followed, including the following:
Power Sources:
Your unit should be connected to a power source only of the
voltage specified in the owners manual or as marked on the unit.
This unit has a polarized plug. Do not use with an extension cord or
receptacle unless the plug can be fully inserted. Precautions should
be taken so that the grounding scheme on the unit is not defeated.
Hazards:
Do not place this producton an unstable cart, stand, tripod, bracketor
table.The productmay fall,causing serious personalinjury and serious
damageto the product.Use only with cart,stand, tripod,bracket, or table
recommendedby the manufacturer or sold with the product.Follow the
manufacturer’sinstructions when installing the product and usemounting
accessoriesrecommended by themanufacturer.
The apparatus should not be exposed to dripping or splashing
water; no objects filled with liquids should be placed on the
apparatus.
Terminals marked with the “lightning bolt” are hazardous live;
the external wiring connected to these terminals require installation
by an instructed person or the use of ready made leads or cords.
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
Power Cord:
The AC supply cord should be routed so that it is unlikely that it will
be damaged. If the AC supply cord is damaged
DO NOT
OPERATE THE UNIT
.
Service:
The unit should be serviced only by qualified service personnel.
INSTRUCTIONS RELATIVES AU RISQUE
DE FEU, CHOC ÉLECTRIQUE, OU
BLESSURES AUX PERSONNES.
AVIS:
AFIN DEREDUIRELESRISQUE DECHOCELECTRIQUE,
N’ENLEVEZPASLE COUVERT (OULE PANNEAU
ARRIERE). NECONTIENT AUCUNEPIECE REPARABLE
PAR L’UTILISATEUR.
CONSULTEZ UN TECHNICIEN QUALIFIE
POUR L’ENTRETIENT.
Veuillez lire le manuel:
Ilcontientdesinformationsquidevraientêtrescomprisesavant
l’opération de votre appareil. Conservez S.V.P. ces instructions
pour consultationsultérieures
Emballage:
Conservez la boite au cas ou l’appareil devait être
retourner pour réparation.
Attention:
Lors de l’utilisation de produits électrique,
assurez-vous d’adhérer à des précautions de bases
incluant celle qui suivent:
Alimentation:
L’appareil ne doit être branché qu’à une source d’alimentation
correspondant au voltage spécifié dans le manuel ou tel qu’indiqué
sur l’appareil. Cet appareil est équipé d’une prise d’alimentation
polarisée. Ne pas utiliser cet appareil avec un cordon de
raccordement à moins qu’il soit possible d’insérer complètement les
trois lames. Des précautions doivent êtres prises afin d’eviter que le
système de mise à la terre de l’appareil ne soit désengagé.
Risque:
Ne pas placercet appareil sur un chariot,un support,un trépied ou une
table instables.L’appareil pourraittomber et blesser quelqu’un ou subir des
dommages importants. Utiliserseulementun chariot,un support, un trépied
ou une table recommandés par le fabricant ou vendusavecle produit.
Suivreles instructions du fabricantpourinstallerl’appareil et utiliserles
accessoiresrecommandés par le fabricant.
Il convient de ne pas placer sur l’appareil de sources de flammes
nues, telles que des bougies allumées.
L’appeil ne doit pas être exposé à des égouttements d’eau ou des
éclaboussures et qu’aucun objet rempli de liquide tel que des vases
ne doit être placé sur l’appareil.
Les dispositifs marqués d’une symbole “d’éclair” sont des parties
dangereuses au toucher et que les câblages extérieurs connectés à
ces dispositifs de connection extérieure doivent être effectivés par un
opérateur formé ou en utilisant des cordons déjà préparés.
Cordon d’alimentation:
Évitez d’endommager le cordon d’alimentation.
N’UTILISEZ PAS
L’APPAREIL
si le cordon d’alimentation est endommagé.
Service:
Consultez un technicien qualifié pour l’entretien de votre appareil.
IMPORTANT SAFETY INSTRUCTIONS
safety-4v0.pdf 04/29/03
The Yorkville Bass Master xm200 and xm200T have been designed with the needs of profes-
V
OLUME
LOW MIDBASS HI MID
TREBLE
LINE /D. I.
OUTPUT
POWER
PHONES /
LINE OUT
BAL
SEND RETURN
EFFECTS LOOP
ON
-
6 dB0 dB
INPUTTUNER OUT
MUTE
D.I.
LINE
OUT
IN
0
4 6
1
3 7
9
2 8
5
10
OFF MAX
SCOOP
15 15
+
-
15 15
+
-
15 15
+
-
15 15
+
-
LIMITER
xm
200
sional bass guitar players in mind. We believe you will find your
Yorkville Bass Master xm200 or
xm200T to be dependable and versatile for years to come.
Tuner Out Jack
This is an instrument-level output ideal for connecting an electronic guitar/bass tuner.
0dB and -6dB Inputs
These are the instrument inputs. Use the 0dB input for bass guitars with normal, passive electronics, like single-coil and humbucking pickups. Use the -6dB for hot or active pickups. These inputs
are not intended for connecting more than one instrument at a time.
Mute Button
The Mute button cuts off all audible signals, except for the output to the Tuner Out jack. This
enables you to tune your bass without having to adjust any settings on either the bass guitar or
xm200 (and the audience will not be able to hear you tuning)
.
Limiter
When engaged, the xm200’s Limiter prevents audible power amplifier clipping (distortion). Unlike input
clip limiters, it does not affect the preamp stage at all. Instead, this Limiter ensures that output-stage clip
ping cannot endanger the speaker or tweeter. In a unique and comprehensive manner, it compares the
output to the available AC power (in technical terms, it reads the DC rail voltage) then, just before output
stage clipping occurs, the Limiter reduces signal levels sufficiently to prevent power amp distortion. This
permits the xm200 to remain cleaner at higher output levels, even when the AC line sags below normal.
Tip: With the Limiter engaged, the only way you can distort your xm200 is by overdriving the preamp, which is quite acceptable for certain playing styles. This will not harm the drivers as long as the
Limiter remains engaged.
Volume
Set the Volume control for the level of sound desired. If unwanted distortion occurs, reduce the
Volume setting and/or the tone control settings (especially bass).
-
Tone Controls
Each tone control permits a wide range of adjustment. The four overlapping controls cover the
entire audio band. The
range up from that, Hi Mid covers the highest notes and middle harmonics and
Bass adjusts the level of the lowest note frequencies, Low Mid the next
Treble regulates
the upper harmonic range. The center setting on these tone controls is approximately neutral.
Tip: when starting out, it may be good ideas to center all tone controls, and then while you play,
adjust them for the desired sound.
Scoop
The Scoop control lets you blend in a unique sound alternative to provide a greatly expanded tonal
range. A setting of 0
Tip: You may find that for best results with Scoop at higher settings, the tone controls should be at
settings closer to the center point.
provides no Scoop and a setting of 10 provides the maximum effect.
Effects Send / Return Jacks
1
Loading...