Traynor TVM10 OWNER'S MANUAL
O w n e r ’ s M a n u a l
Manual-Owners-TVM10-1v1.pdf
G u i d e d e l ’ u t i l i s a t e u r
B A T T E R Y P O W E R E D C O M B O A M P L I F I E R
T r a y n o r T V M 1 0
MODEL TYPE: YS1046
IMPORTANT SAFETY INSTRUCTIONS
safety-4v3.eps • Oct. 26/05
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
INSTRUCTIONS PERTAINING TO A
RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS
Read Instructions
The Owner’s Manualshould be read and understood
before operation of your unit. Please, save these instructions for future reference.
Packaging
Keep the box and packaging materials, in case the unit
needs to be returned for service.
Warning
When using electric products, basic precautions should
always be followed, including the following:
Power Sources
Your unit should be connected to a power source only of the voltage
specified in the owners manual or as marked on the unit. This unit has a
polarized plug. Do not use with an extension cord or receptacle unless
the plug can be fully inserted. Precautions should be taken so that the
grounding scheme on the unit is not defeated.
Hazards
Do not place this product on an unstable cart, stand, tripod, bracket or
table. The product may fall, causing serious personal injury and serious
damage to the product. Use only with cart, stand, tripod, bracket, or
table recommended by the manufacturer or sold with the product.
Follow the manufacturer’s instructions when installing the product and
use mounting accessories recommended by the manufacturer.
The apparatus should not be exposed to dripping or splashing water;
no objects filled with liquids should be placed on the apparatus.
Terminals marked with the “lightning bolt” are hazardous live; the
external wiring connected to these terminals require installation by an
instructed person or the use of ready made leads or cords.
Ensure that proper ventilation is provided around the appliance.
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
Power Cord
The AC supply cord should be routed so that it is unlikely that it will be
damaged. If the AC supply cord is damaged DO NOT OPERATE THE UNIT.
Service
The unit should be serviced only by qualified service personnel.
AVIS:
AFIN DE REDUIRE LES RISQUE DE CHOC ELECTRIQUE,
N’ENLEVEZ PAS LE COUVERT (OU LE PANNEAU ARRIERE)
NE CONTIENT AUCUNE PIECE
REPARABLE PAR L’UTILISATEUR.
CONSULTEZ UN TECHNICIEN QUALIFIE
POUR L’ENTRETIENT
INSTRUCTIONS RELATIVES AU RISQUE
DE FEU, CHOC ÉLECTRIQUE, OU
BLESSURES AUX PERSONNES
Veuillez Lire le Manuel
Il contient des informations qui devraient êtres comprises
avant l’opération de votre appareil. Conservez S.V.P. ces
instructions pour consultations ultérieures.
Emballage
Conservez la boite au cas ou l’appareil devait être
retourner pour réparation.
Attention:
Lors de l’utilisation de produits électrique, assurezvous d’adhérer à des précautions de bases incluant
celle qui suivent:
Alimentation
L’appareil ne doit être branché qu’à une source d’alimentation
correspondant au voltage spécifié dans le manuel ou tel qu’indiqué sur
l’appareil. Cet appareil est équipé d’une prise d’alimentation polarisée.
Ne pas utiliser cet appareil avec un cordon de raccordement à moins
qu’il soit possible d’insérer complètement les trois lames. Des
précautions doivent êtres prises afin d’eviter que le système de mise à
la terre de l’appareil ne soit désengagé.
Risque
Ne pas placer cet appareil sur un chariot, un support, un trépied ou une
table instables. L’appareil pourrait tomber et blesser quelqu’un ou subir
des dommages importants. Utiliser seulement un chariot, un support,
un trépied ou une table recommandés par le fabricant ou vendus avec
le produit. Suivre les instructions du fabricant pour installer l’appareil et
utiliser les accessoires recommandés par le fabricant.
Il convient de ne pas placer sur l’appareil de sources de flammes
nues, telles que des bougies allumées.
L’appeil ne doit pas être exposé à des égouttements d’eau ou des
éclaboussures et qu’aucun objet rempli de liquide tel que des vases
ne doit être placé sur l’appareil.
Assurez que lappareil est fourni de la propre ventilation.
Les dispositifs marqués d’une symbole “d’éclair” sont des parties
dangereuses au toucher et que les câblages extérieurs connectés à
ces dispositifs de connection extérieure doivent être effectivés par un
opérateur formé ou en utilisant des cordons déjà préparés.
Cordon d’Alimentation
Évitez d’endommager le cordon d’alimentation. N’UTILISEZ PAS
L’APPAREIL si le cordon d’alimentation est endommagé.
Service
Consultez un technicien qualifié pour l’entretien de votre appareil.
TVM10
TVM10
0 5 10 0 5 10 10 0 10 10 0 10 10 0 10 10 0 10
Vo l um e 1
Mi c / I ns t .
In p u t 2
E q ua li z a t io n
In p u t 1
Vo l um e 2
In s t ru m e nt
Lo w Mi d Hi M id Ba s s
DC Cha rg er
150 0 m A
Cha rge r L ED
Illu min ated
When Ch argi ng
DO NOT US E UN IT
WH IL E C HA RG IN G!
Tr e bl e
Ph one s
Aux. Input
(M edia )
Po wer
15 VDC
+
-
The Power LED illuminates Yellow when the unit i s on and fully c harged. Red illu mination indicat es low
battery p ower status. To recha rge, turn Power off and connect supplied 15 VDC charger to charg er jack.
The Charger LED i llumina tes Re d whil e unit is ch arging . When chargi ng cyc le is
comp lete, t he LED will automa ticall y turn off. W hen th e char ger is plugg ed in and the
Powe r LED f ails t o illum inate, the u nit mu st be rechar ged for 24-ho urs. I f the Power
LED fails t o illu minate Yellow after chargi ng, th e inte rnal b attery may b e deem ed dead .
Refe r to Ow ner’s M anual for mor e deta iled i nstruc tions about replaci ng the inter nal ba ttery.
CAUTION: This unit contain s a sealed re chargeable bat tery. Improper di sposal of bat tery or repl acement with
any other type may cause l eakage, explo sion, and/or p ersonal injur y. Not user servi ceable, refer to qualified service tech nician.
MODEL TYPE: YS1046
1v2
MADE I N CHINA
FABRIQUÉ EN CHINE
MANUFACTU RED FOR YORKV ILLE SOUND, CA NADA
Traynor TVM10 Battery Powered Combo-Amplifier
General
The Traynor TVM10 is a 10-Watt battery powered combo-amplifier that answers the need for a portable, all-purpose
sound system. The TVM10 can be used practically anywhere. The amp features RCA auxiliary input jacks, which
may be used to connect sound sources such as CD players, tape decks, MP3 players or even laptops (using the
appropriate audio adapters).
Control Panel
Input 1
This versatile input has been optimized to accept
either low or high-impedance microphones, although
any line level signal may also be used. The combiconnector accepts cables with either an XLR or ¼inch TRS phone plugs.
Volume 1
The Channel 1 volume control adjusts the level of the
audio signal connected to the Input 1 jack.
Input 2
An instrument (guitar, bass or keyboard) or a high
impedance microphone may be connected to the
TVM10 using this ¼-inch phone jack using a standard
¼-inch shielded cable.
Volume 2
The Channel 2 volume control adjusts the level of the
signal connected to the Input 2 ¼-inch jack.
Equalization - General
The TVM10’s 4-band EQ adjusts the Bass, Low Mid,
Hi Mid and Treble for inputs 1 and 2.
Note: The tone controls do not affect the RCA Aux
(Media) Inputs.
It is suggested that all four controls be set to the
center, or 0, position (nominal) prior to operation,
adjustments may be made to achieve the desired tone.
If feedback occurs while you are using a microphone,
turn down the Treble and/or High Mid until it stops.
Aux. Inputs
The Aux. Input (Media) RCA jacks can be used to
connect a tape deck, CD player, MP3 player, drum
machine, computer or any line-level audio source.
Since the TVM10 is a mono amplifier, these jacks
sum the signals internally (mixing the incoming L and
R stereo signals into a mono signal). Using a stereo
signal? Connect to both RCA jacks as usual, so that
both channels (L and R) are amplified. If the signal is
mono, (e.g. the monitor or aux. output from a mixer),
connect to either the L or R jack.
1
Loading...