Traulsen ALT232DUT-HHS, ALT132DUT-HHS, RLT232DUT-HHS, ALT232DUT-FHS, RLT132DUT-HHS User Manual

Project Quantity Item #

Model Specified: CSI Section 11400

"D-Width" Reach-In Freezer Models/

Self-Contained

INTELA-TRAUL

Equipped!

®

Model RLT132DUT-FHS

(shown with optional casters)

Standard Product Features

• R-Series: Stainless Steel Exterior & Interior

• A-Series: Stainless Steel Exterior/Anodized Aluminum Interior

• INTELA-TRAUL® Microprocessor Control System

• Balanced, Self-Contained Refrigeration System Using R-404A

• Scroll Blower Type Evaporator Fan (two section models only)

• Biased Return Air Duct (two section models only)

• Full or Half Length Stainless Steel Doors With Locks

• Self-Closing Doors With Stay Open Feature At 120 Degrees

• Guaranteed For Life Cam-Lift Hinges

• Guaranteed For Life Horizontal Work Flow Door Handle

• Standard Door Hinging: 132D = Right, 232D = Left/Right (other

hingings not available for two-section models)

• Automatically Activated Incandescent Lights

• Stainless Steel Breaker Caps

• Three Chrome Plated Adjustable Shelves Per Section,

Supported On Shelf Pins (installed at the factory)

• Automatic Non-Electric Condensate Evaporator (two section
models only)

• Magnetic Snap-In Door Gaskets

• Gasket Protecting Metal Door Liner

• Controllable Anti-Condensate Door Perimeter Heaters

• Thermostatic Expansion Valve Metering Device

• Stainless Steel One-Piece Louver Assembly

• 9' Cord & Plug Attached

• Set of Four (4) 6" High Adjustable Stainless Steel Legs

• One Year Parts And Labor Warranty

• Two Year Control Warranty (parts and labor)

• Five Year Compressor Warranty

One & Two Section Models, 26" Deep

1-Section Full Length Door Model RLT132DUT-FHS

R

SERIES

Stainless Exterior

& Interior

A

SERIES

Stainless Exterior,

Anodized

Aluminum Interior

The R & A Series represent Traulsen's Top-of-the-Line product offering. The
“D-Width” reach-in freezer models are all designed to offer maximum
interior storage capacity within a narrow 24" or 48" footprint. Each is
supplied standard with such high quality features as balanced
refrigeration systems, microprocessor controls, communications ability and
stainless steel exteriors. Additionally, they offer the widest range of optional
accessories to choose from, and can be specified for use with many
different applications, including: Foodservice, Correctional, Institutional,
Export, etc.

2-Section Full Length Door Model RLT232DUT-FHS
1-Section Half Length Door Model RLT132DUT-HHS
2-Section Half Length Door Model RLT232DUT-HHS

1-Section Full Length Door Model ALT132DUT-FHS
2-Section Full Length Door Model ALT232DUT-FHS
1-Section Half Length Door Model ALT132DUT-HHS
2-Section Half Length Door Model ALT232DUT-HHS

Options & Accessories

• Stainless Steel Finished Back With Rear Louvers

• Re-Hinging Feature For Door(s)

• Additional Chrome Plated Shelves

• No. 1 Type Tray Slides To Accommodate either (1) 18" x 26"

or (2) 14" x 18" Sheet Pans, Adjustable To 2" O.C.

• No. 2 Type Tray Slides To Accommodate (1) 18" x 26" Sheet
Pans, Adjustable To 2" O.C.

• Locking Hasps (padlocks supplied by others)

• Stainless Steel Shelves In Lieu of Standard Chrome Plated

• Kool Klad Exterior Laminate Decor

• Set of Four (4) 6" High Casters In Lieu of Legs

• Set of Four (4) 4-5/8" High Casters In Lieu of Legs

• 4-1/2" High Stainless Steel Base In Lieu of Legs

• 6" High Stainless Steel Kickplate (for use with standard legs)

• Prison/Correctional Facilities Options

• Remote Applications (see spec sheet 12-2 for more details)

• Two Year Service/Labor Warranty Available

Listed by Underwriters Laboratories Inc., to
U.S. and Canadian safety standards and
Listed by NSF International.

TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE [phone] FAX-MKTG. 1 [phone]
Website: www.traulsen.com

Approval: ___________________________________

SECTION

1-11

Project Quantity Item #

Model Specified: CSI Section 11400

Specifications

Construction, Hardware and Insulation

Cabinet exterior front, one piece sides, louver assembly and doors are constructed
of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are
constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet
top, back and bottom are constructed of heavy gauge aluminized steel. A set of four
(4) adjustable 6" high stainless steel legs are included.

Doors are equipped with a gasket protecting metal door pan, removable plug
cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide
hinges with stay open feature at 120 degrees. Hinges include a concealed switch to
automatically activate the interior incandescent lighting. Guaranteed for life, work
flow door handles are mounted horizontally over recess in door which limits
protrusion from door face into aisleways. Doors have seamless, polished metal
corners.

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.

Both the cabinet and door(s) are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.

DIMENSIONAL DATA R/ALT132DUT R/ALT232DUT

Net capacity cu. ft. 17.7 (501 cu l) 42.0 (1190 cu l)

Length - overall in. 24 (61.0 cm) 48 (121.9 cm)

Depth - overall in. 35 (88.8 cm) 35 (88.8 cm)

Depth - less handle in. 333⁄4 (84.4 cm) 333⁄4 (84.4 cm)

Depth - over body in. 32 (81.3 cm) 32 (81.3 cm)

Depth - door open 90° in. 543⁄4 (139.1 cm) 543⁄4 (139.1 cm)

Clear door width in. 185⁄8 (47.3 cm) 199⁄16 (49.7 cm)

Clear half-door height in. 271⁄2 (69.9 cm) 271⁄2 (69.9 cm)

Clear full-door height in. 575⁄8 (146.3 cm) 575⁄8 (146.3 cm)

Height - overall on 6" legs 831⁄4 (211.5 cm) 831⁄4 (211.5 cm)

RLT Net Wt. lbs. 360 (163 kg) 619 (280 kg)

ALT Net Wt. lbs. 320 (145 kg) 560 (254 kg)

No. Standard Shelves 3 6

Shelf area sq. ft.

1

14.2 (1.3 sq m) 31.6 (2.9 sq m)

ELECTRICAL DATA

Voltage 115/60/1 115/60/1

Feed wires with Ground 3 3

Full load amperes 11.5 14.9

REFRIGERATION DATA

Refrigerant R-404A R-404A

BTU/HR H.P.

NOTE: Figures in parentheses reflect metric equivalents.
1= Area of standard shelf compliment only, does not include storage area of additional shelves or available

2= Based on a 90 degree F ambient and -20 degree F evaporator.
3= For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other information

2

on cabinet bottom.

on remote models, please refer to spec sheet 12-2.

1890 (1⁄2 HP) 3070 (3⁄4 HP)

NOTES

Refrigeration System

A top mounted, self-contained, balanced refrigeration system using R-404A
refrigerant is conveniently located behind the one piece louver assembly. It features
an easy to clean front facing condenser, thermostatic expansion valve, air-cooled
hermetic compressor and a plenum effect blower coil. Two section models include a
large, high humidity evaporator coil located outside the food zone and a top mounted
non-electric condensate evaporator. One section models include an interior mounted
ceiling coil and bottom mounted electric condensate evaporator. A 9' cord and
plug is provided. Standard operating temperature is 0 to -5°F.

Controller

The easy to use water resistant INTELA-TRAUL
supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready.
Optional hardware required to be NDP compliant. Third party software required for
network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius
Temperature Scale Display Capability, Defrost Lockouts, and an RS485 data port.
In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open,
Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power
Supply Interruption.

Interior

Standard interior arrangements include three (3) chrome plated wire shelves per
section, mounted on shelf pins. Shelves are full-width, and do not have any large
gaps between them requiring the use of "bridge" or "junior shelves." Recommended
load limit per shelf should not exceed 225 lbs. Optional tray slides may be
purchased in combination with, or in lieu of these. Both standard and optional
interior arrangements are completely installed at the factory.

Warranties

Both a one year parts and labor warranty and a five year compressor warranty (self­contained models only) are provided standard. An optional 2
and labor warranty is also available. In addition the INTELA-TRAUL® control is
warranted by a two year parts and labor warranty.

Elevation -

R/ALT132DUT

Elevation -

R/ALT232DUT

®

microprocessor control system is

nd

year extended parts

Plan - R/ALT232DUT

One Section Models Equipped
With One NEMA 5-15P Plug

Plan - R/ALT132DUT

Two Section Models Equipped
With One NEMA 5-20P Plug

NOTE: Full load amps and plug style may vary depending
on electrical options chosen and condensing unit employed.

NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any
additional warranties.

Continued product development may necessitate specification changes without notice.
Part No. TR35765 (revised 1/07)

TRAULSEN

SECTION

1-11

4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE [phone] FAX-MKTG. 1 [phone]
Website: www.traulsen.com

Section - R/ALT132DUT

Section - R/ALT232DUT