Transmille EA022 Operating Manual
EA022
Process Control
Calibration Adapter
Operation Manual
Version 1.00
August 2014
All product names are trademarks of their respective companies
EA022 PROCESS CONTROL CALIBRATION ADAPTER
OPERATION MANUAL
Guarantee and service
Transmille Ltd. guarantees this instrument to be free from defects under normal use
and service for a period of 1 years from purchase. This guarantee applies only to
the original purchaser and does not cover fuses, or any instrument which, in
Transmille’s opinion, has been modified, misused or subjected to abnormal
handling or operating conditions.
Transmille’s obligation under this guarantee is limited to replacement or repair of an
instrument which is returned to Transmille within the warranty period. If Transmille
determines that the fault has been caused by the purchaser, Transmille will contact
the purchaser before proceeding with any repair.
To obtain repair under this guarantee the purchaser must send the instrument in its
original packaging (carriage prepaid) and a description of the fault to Transmille at
the address shown below. The instrument will be repaired at the factory and
returned to the purchaser, carriage prepaid.
Note :
TRANSMILLE ASSUMES NO RESPONSIBILITY FOR DAMAGE IN TRANSIT
THIS GUARANTEE IS THE PURCHASER’S SOLE AND EXCLUSIVE GUARANTEE
AND IS IN LEIU OF ANY OTHER GUARANTEE, EXPRESSED OR IMPLIED.
TRANSMILLE SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL
OR CONSEQUENTIAL DAMAGES OR LOSS.
Transmille Ltd.
Unit 4, Select Business Centre
Lodge Road
Staplehurst
Kent
TN12 0QW
United Kingdom
Tel : +44 0 1580 890700
Fax : +44 0 1580 890711
EMail : sales@transmille.com
Web : www.transmille.com
Transmille Ltd. Page 2
EA022 PROCESS CONTROL CALIBRATION ADAPTER
OPERATION MANUAL
TABLE OF CONTENTS
GUARANTEE AND SERVICE...............................................................................................................2
EA022 PROCESS CONTROL CALIBRATION ADAPTER...................................................................4
MAIN FEATURES..................................................................................................................................5
DEDICATED EXTERNAL ADAPTER FOR EXPANDED FUNCTIONALITY..........................................................5
INTUITIVE OPERATION & CONTROL ........................................................................................................5
CONNECTIONS OVERVIEW.................................................................................................................5
CONNECTIONS OVERVIEW.................................................................................................................6
Voltage Measurement Function Connection .................................................................................6
Current Measurement Function Connection..................................................................................6
Resistance Measurement Function Connection............................................................................7
Pressure Measurement Function Connection Using TPMxx Pressure Modules ..........................7
USING THE VOLTAGE MEASUREMENT FUNCTION ........................................................................8
CONNECTING THE UUT.........................................................................................................................8
USING THE VOLTAGE MEASUREMENT MENU...........................................................................................9
USING THE CURRENT MEASUREMENT FUNCTION......................................................................10
CONNECTING THE UUT.......................................................................................................................10
USING THE CURRENT MEASUREMENT MENU........................................................................................11
USING THE RESISTANCE MEASUREMENT FUNCTION.................................................................12
CONNECTING THE UUT.......................................................................................................................12
USING THE RESISTANCE MEASUREMENT MENU....................................................................................13
USING THE PRESSURE MEASUREMENT FUNCTION USING TPMXX PRESSURE MODULES..14
CONNECTING THE UUT.......................................................................................................................15
USING THE RESISTANCE MEASUREMENT MENU....................................................................................15
AUTOMATED CALIBRATION USING PROCAL................................................................................17
CARE & MAINTENANCE....................................................................................................................18
CLEANING THE ADAPTER.....................................................................................................................18
HANDLING PRECAUTIONS....................................................................................................................18
SERVICING INFORMATION....................................................................................................................18
Appendix A : Specifications
Transmille Ltd. Page 3
EA022 PROCESS CONTROL CALIBRATION ADAPTER
OPERATION MANUAL
EA022 Process Control Calibration Adapter
External Unit
Adds Voltage, Current and Pressure Measurement Capabilities to the 1000 Series
• mV Measurement to 30V
• mA Measurement to 30mA
• Resistance Measurement to 50kOhms
• 24V Loop supply for Transducers
• Pressure module input for pressure monitoring
Built-In 24V Loop Supply
Direct Control from the 1000 Series Front Panel
Compatible With ProCal Calibration Software
Transmille Ltd. Page 4
EA022 PROCESS CONTROL CALIBRATION ADAPTER
OPERATION MANUAL
Main Features
Dedicated External Adapter For Expanded Functionality
The EA022 adapter expands the functionality of the 1000 series calibrator to enable the
calibration of process control calibrators & pressure transducers. This compact adapter
also features a 24V loop supply and is the ideal addition to expand workload capabilities
for the 1000 Series ultra portable calibrator.
A dedicated pressure module input on the rear of the adapter also allows pressure
monitoring for transducer calibration.
Intuitive Operation & Control
Easy selection of measurement modes
Quick and easy to use, simply plug in the process control calibration adapter into the 1000
Series calibrator, select EA022 and select a measurement function.
Transmille Ltd. Page 5
Loading...