Transmille EA3025A, EA013 Data sheet

3000

MULTI PRODUCT CALIBRATORS

SERIES

www.TransmilleCalibration.com

THE VERSATILE SOLUTION

FOR LABORATORIES & SERVICE CENTERS

3000SERIES

THE FLEXIBLE SOLUTION FOR YOUR CALIBRATION WORKLOAD

Ü

Transmille : The Complete Solution

The widest workload of any multi product
calibrator - over 18 types of instruments with
power to drive older analogue instruments and
the accuracy to calibrate modern digital
instruments

Ideal for both laboratory and on-site use.
Modern technology provides a fast warm up
time and extremely portable design.

Automate calibration with ProCal - the worlds
easiest to use multi discipline calibration
software for maximum calibration throughput

8PPM MULTI PRODUCT CALIBRATOR

Ü

Ü

Meeting Workload Requirements

The 3000 Series calibration system has been designed to help you &
your business, allowing a wide range of calibration work to be performed
quickly, accurately & economically. Modern calibration is a competitive
market, and cost effective equipment and software are key
considerations.

Meeting the needs of today's quality systems including ISO9000 /
ISO17025 require calibration traceable to national standards of a wide
range of instrumentation. The 3000 Series calibration system provides
the ideal platform to cover these calibration requirements, whether in the
laboratory or on site. Every Transmille calibrator and adapter is supplied
with UKAS calibration traceable to National standards, and are ready for
use out of the box.

Offering the widest workload coverage of any calibration system
presently available, the 3000 series is a true class leading solution. The
unique concept of external calibration adapters combined with built-in
measurement capability dramatically extends the range of instruments
that can be cost effectively calibrated.

Automated Calibration & Management Software

ProCal is the genuinely easy to use calibration software which
complements the 3000 Series calibration system to provide a complete
laboratory solution. Maximum calibration throughput is achieved with
multi discipline support. ProCal-Track adds laboratory management
control with dynamic job tracking from goods inwards to despatch ­streamlines laboratory operation.

Ü

Comprehensive Instrument Calibration

25PPM MULTI PRODUCT CALIBRATOR

MID RANGE MODELLABORATORY REFERENCE

50PPM MULTI PRODUCT CALIBRATOR

Ü

ENTRY LEVEL MODEL

CALIBRATES...

UP TO 7½ DIGIT MULTIMETERS :: 3010

Ü

UP TO 5½ DIGIT MULTIMETERS :: 3041

Ü

UP TO 4½ DIGIT MULTIMETERS :: 3050

Ü

DIGITAL OSCILLOSCOPES TO 600MHz

Ü

CLAMP METERS

Ü

WATT / POWER METERS

Ü

RLC METERS / AC BRIDGES

Ü

POWER SUPPLIES

Ü

INSULATION TESTERS

Ü

PROCESS CONTROL CALIBRATORS

Ü

HIGH RESISTANCE MEASUREMENT

Ü

ELECTROMETERS

Ü

CURRENT SHUNTS

Ü

DATA LOGGERS

Ü

The most cost effective calibration system on
the market - 3 models to suit budget & accuracy
requirements

The wide range of options allows the
calibrator to be tailored to meet your needs ­expandable for the future

Intuitive front panel design with large LCD
display and ergonomic keyboard for ease of use

Full output protection including system ­prevents output being switched on when voltage
detected on terminals

Guaranteed reliability with 3 year warranty

2

as standard

I-GUARD

AC/DC KILOVOLT AMPLIFIER

2/10/50 TURN CLAMP COIL

Ü

CALIBRATION ADAPTERS

Ü

CALIBRATION SOFTWARE

Ü Ü

ÜÜ

TRANSCONDUCTANCE AMP

MULTI FUNCTION WORKSTATION

PRESSURE GAUGES

Ü

HV PROBES

Ü

TORQUE SCREWDRIVERS

Ü

FREQUENCY COUNTER/TIMERS

Ü

CHART RECORDERS

Ü

AND MORE...

Ü

FOR RCD • LOOP • PAT TESTERS

See the Transmille 3200 Electrical
Test Equipment Calibrator Brochure.

3

3000SERIES3000

THE FLEXIBLE SOLUTION FOR YOUR CALIBRATION WORKLOAD

8

PPM ACCURACY MODEL 3010

25

PPM ACCURACY MODEL 3041

PPM ACCURACY MODEL 3050

50

AC/DC VOLTAGE TO 1025V

V

A

AC/DC CURRENT TO 30A
2&4 WIRE RESISTANCE TO 1GW

W

PASSIVE & SIMULATED MODES

CAPACIT ANCE T O 10mF

F

PASSIVE & SIMULATED MODES

H

INDUCTANCE TO 10H

Hz

FREQUENCY TO 10MHz

RTD

RTD/PRT SIMULATION

PRT

Clear presentation of calibrator outputs & status on a

large graphic LCD display for safe & easy operation.

Separate outputs for

Voltage, Low Current
and High Current
minimise lead
changing when
connecting. Dedicated
BNC outputs for
oscilloscope
(Amplitude / Timebase
/ Freq. Sweep) and
Frequency.

RS

RS232 INTERFACE BUILT IN

232

GPIB

GPIB / USB OPTIONS

USB

AC/DC POWER CALIBRATION

W

WITH POWER HARMONICS

O

OSCILLOSCOPE CALIBRATION

250MHz • 350MHz • 600MHz OPTIONS

BUILT IN ADAPTER INTERFACE

Ü

INTEGRATED HIGH ACCURACY MEASUREMENT FUNCTION

THERMOCOUPLE SIMULATION ADAPTER

POWER SUPPLY CALIBRATION ADAPTER

HUMIDITY/TEMPERATURE SENSOR ADAPTER

OSCILLOSCOPE CALIBRATION TEST HEAD ADAPTER

PLUS...HIGH RESISTANCE / pA MEASUREMENT ADAPTER
PA SOURCE ADAPTER
OPTICAL TACHOMETER CALIBRATION ADAPTER
PRESSURE CALIBRATION ADAPTER
TORQUE CALIBRATION ADAPTER

ADVANCED TECHNOLOGY

The 3000 series calibrators use the latest technology from the
temperature stabilised reference to the sub ppm linearity D/A.

DDS (Direct Digital Synthesis)

jitter free wideband AC waveforms. Custom waveforms for use in
harmonics calibration are available with the 3041/3010 power options.

An ultra-linear VMOS power amplifer

capability with continuous output available up to 20A. A power efficient
design with two-stage cooling has resulted in reduced internal thermal
EMFs for superior short term stability whilst reducing fan noise for a more
comfortable working environment.

I-GUARD

the output sockets for voltages applied accidentally when switching from
standby to output on - protects your investment from accidental misuse.

4

intelligent output protection safeguards the calibrator by testing

technology is used for generating stable,

provides a ground breaking 30A

Soft keys

menu commands, unlocking the
potential of the 3000 Series
calibrators.

Large output on and standby buttons

and useful range up/down buttons
also add to the ease of use.

R A

PORTABLE

The ultra portable 3000 Series calibrators
begin a new era in true on-site calibration.
Using the soft, over the shoulder tailored
travel case, your calibration system can be
taken with you to the calibration work,
whether it is in an aircraft hanger, on board
a ship or oil rig.

A fast warm up time ensures the 3000
Series will be ready to work wherever you
are. Connect to your laptop for a complete
automated calibration system.

provide direct access to the

,

Ergonomic calculator style keypad makes it

easy to enter values. Intuitive function keys
and key layout makes using the function
control section second nature.

Adapter interface for power,

control and measurement for the
range of calibration adapters.

S

SOURCE

ÜÜÜ

The 3000 Series generates all the outputs required for
multimeter calibration, plus options for :

Oscilloscope Calibration

base, fast rise and bandwidth up to 600MHz. A key
feature is the ability to support the growing number of
oscilloscopes with 50V/Div (300V Pk-Pk) ranges.

AC/DC Power Calibration

voltage to 1025V and current to 30A outputs to simulate
power up to 30.6kW (1.5MW using the 50 turn coil).
Phase angle control up to 359.9° is available.

Harmonics Calibration

3010 includes five preset waveforms and support for
custom defined harmonics upload using a PC.

M

MEASURE

COMPLETE WORKLOAD CAPABILITY

Built-in source and measurement
capabilities incorporating a high
linearity A/D converter.

including amplitude, time

uses simultaneous generated

option available for 3041 &

Integrated Calibration
Workstation

for clamp meter, insulation
testers, process control
calibrator, temperature meter &
optical tachometer calibration

RCL Meters

unique to the Transmille 3000 Series.
The passive inductance, resistance & capacitance in the 3000
Series are suitable for measurement using any technique,
including . For total flexibility simulated resistance
and capacitance options are also available.

Frequency Meter

accuracy to 1ppm
Using the external calibration adapters,

Process Control Calibrators, Electrometers, Insulation
Testers, Pressure Gauges and Transmitters, even Torque
Screwdrivers

can be calibrated using the inductance option,

AC Bridges

calibration up to 10MHz is supported with

Power Supplies,

can be calibrated quickly and efficiently.

5

3000SERIES OSCILLOSCOPE CALIBRATION OPTION

SCP250 / SCP350 / SCP600

3000SERIES POWER CALIBRATION OPTION

PWR50 / PWRSINE / PWRDDS

AMPLITUDE

Easily selected using the softkeys, the calibrator produces either a precision 1kHz
square wave or a DC level covering the range from 2mV/Div to 50V/Div in a 1,2,5
sequence. Deviation up to 10% in 0.01% steps can be applied using the digital
potentiometer. The calibrator's wide range output, giving up to 300V pk-pk, can be
used to directly calibrate the ever increasing number of oscilloscopes with amplitude
ranges up to 50V/Div placing it in a class leading position.

TIMEBASE

The timebase function of the oscilloscope option provides outputs from 2ns/Div to
5s/Div. Deviation up to 10% in 0.01% steps can be applied using the digital control.
To use, simply align the time marker with the graticule display and read the
deviation from the % display on the calibrator. The comb waveform used below
100ns is ideal for triggering on both analogue and digital oscilloscopes alike. For
faster timebase calibration, a sine wave is produced which makes viewing on
bandwidth limited oscilloscopes easier. The timebase output can be used either
directly or into a 50 Ohm input.

SPECIFICATIONS

Volt age Amplitude

Range
Sequence
Frequency
Accuracy

Time Markers

Range
Sequence
Waveshape

Accuracy

Fast Rise*

* 3041 / 3010 only

Leveled Sweep

Range (SCP250)
Range (SCP350)
Range (SCP600)
Leveled Sweep
Reference Level
Accuracy

50kHz Reference

Frequency Accuracy
Level Accuracy

See extended specifications for full details

6

600mV into 50Ohms

2mV/Div to 50V/Div

1 • 2 • 5

1kHz

0.01% ± 5uV

2ns to 5s

1 • 2 • 5

Comb < 100ns

Sine > 100ns

5ppm

1ns typical

5MHz to 250MHz
5MHz to 350MHz
5MHz to 600MHz

50kHz

0.5dbm

30ppm

0.5%

Three options are available for the 3000 Series calibrators which are suitable for
calibration of both analogue and digital storage oscilloscopes.

250MHz (SCP250) : 3050

350MHz (SCP350) : 3041 / 3010

600MHz (SCP600) : 3041 / 3010

All options provide the calibration waveforms required for amplitude,
timebase and bandwidth including gain and linearity of the horizontal and
vertical deflection circuits. To minimise lead changing, the oscilloscope
outputs are output from a single BNC connector - for automated calibration
an optional 4 channel test head adapter is available.

Amplitude to 50V/Div (300V Pk-Pk) - 1,2,5 sequence

Timebase to 2ns

Separate trigger output

All calibration signals from a single BNC

FAST RISE

A fast rise output is available with a rising edge
time of typically 1ns for evaluating overshoot,
undershoot and ringing of oscilloscope
attenuation and amplifier circuits.

LEVELED SWEEP

The leveled sweep output of the oscilloscope option
provides a continuously variable sine wave from
5MHz to 620MHz. A 50kHz reference level
waveform is also available to allow the oscilloscope
controls to be set to give a 6 graticule height display.

OSCILLOSCOPE CALIBRATION TEST HEAD

SOURCE

EA017

For automating oscilloscope calibration a 4 channel switching test head is
available. Connect to the 3000 Series adapter interface and select channel
required. For accurate calibration of 50Ohm input oscilloscopes up to 1V/Div
a low impedance buffered amplitude output can be selected.

SPECIFICATIONS

Channels

Input
Output

Output Impedance

Direct
Buffered

See extended specifications for full details

1
4

As Input

Typically 0.2W

AFFORDABLE AC/DC POWER CALIBRATION

Three options provide cost effective calibration of power (Watts) and VA ranges
on power meters, power/harmonics analysers & clamp meters. The power option
for the 3000 series calibrators allows both voltage current output to be generated
simultaneously (phantom load) with an adjustable phase
angle relationship.

3050 : Sine power option (PWR50)

3041/3010 : 2 options
PWRSINE : Sine & DC power
PWRDDS : 5 waveforms+custom & DC

Up to 1.5MW (using 50 Turn Clamp Coil)

0° to 359.9° adjustable phase relationship

Any voltage up to 1025 Volts can be set using the normal output ranges and
specification of the calibrator. Currents up to 30Amps are available from the output of
the calibrator without the need for an external amplifier.

The power function is extremely easy to use - select 'Power' from the soft key menu,
connect the power meter to both the voltage and current output terminals and enter
the voltage, current and frequency. Phase angle can be adjusted using the softkeys
with a resolution of 0.1°. Power output is calculated & displayed in kW.

The 3000 series calibrator dynamically controls the phase angle between the current
and voltage waveforms eliminating errors caused by capacitive or inductive loading
experienced when using clamp coils.

ACV

WA VEFORM

GENERATION

PHASE

TCXO

OSCILLATOR

CONTROL

PHASE ANGLE

PHASE

CONTROL

CONTROL

MICROPROCESSOR

FREQUENCY
CONTROL

DIGITAL

CONTROL

FREQUENCY
CONTROL

ACI

WA VEFORM

GENERATION

Extended Power Range Using The 2 / 10 / 50 Clamp Coil

Combined with the optional clamp coil adapter the power calibration
option allows a current of 1500Amps to be simulated, and power
to1.5Megawatt (1500Amps x 1000Volts).

Power Harmonics Analyser Calibration Using
Programmable Waveforms (Option PWRDDS)

Option PWRDDS for the 3041 and 3010 calibrators allows generation of
waveforms with harmonic content for calibrating power meters with
power harmonics functions. This includes a set of five fixed waveforms,
plus the capability to upload user defined waveforms from a PC
allowing waveforms with custom harmonic content to be generated.

kWatt hour meter & Energy Calibration.

Using the 3000 Series VFP the Voltage,
current, frequency, phase angle, time
and the number of coil turns can all
easily be set, click the energy button and
the power is turned on for a set period
making calibration of kWatt/hours and
energy meters easy.

VOLTAGE

O/P

PHASE
COMPARATOR

CURRENT

O/P

SPECIFICATIONS

DC Power (3041/3010)

Voltage Range
Current Range
Resolution 300mA to 2A
2A to 30A
Accuracy 300mA to 2A
2A to 30A

AC Power

Voltage Range
Frequency Range
Resolution
300mA to 2A
2A to 30A

Accuracy : 3041/3010

300mA to 2A
2A to 30A

Accuracy : 3050

300mA to 2A
2A to 20A
Phase Angle Resolution
Phase Accuracy

See extended specifications for full details

CURRENT

PHASE

VOLTS

0 to 1025V

300mA to 30A

200uA

2mA

0.05% ± 0.35mW/Volt

0.04% ± 3.5mW/Volt

0 to 1025V

40Hz to 1kHz

200uA

2mA

0.05% ± 0.35mW/Volt

0.05% ± 3.5mW/Volt

0.1% ± 0.5mW/Volt

0.1% ± 5mW/Volt

0.1°

0.1°

7

3000SERIES INDUCTANCE CALIBRATION OPTION

OPTION IND (for 3041/3010)

By incorporating this useful and easy to use option the work load of the
calibrator can be increased to allow calibration of RLC (Resistance,
Inductance and Capacitance) meters and bridges and also allows
calibration of DMMs with inductance measurement ranges.

Incorporates 8 fixed values, including 19mH and 29mH for '3' range
meters to allow testing of these types of meters at points which can
verify their linearity at near full scale points.

SOURCE

3000SERIES PRECISION LEAD SET OPTION

OPTION 3000LEAD

Comprehensive 19 piece test lead & adapter set

Low thermal gold/copper voltage leads (0.7uV)
High current 32A leads
All 4mm plugs with safety shrouds

A comprehensive collection of test leads and adapters is provided to cover
requirements from low level DC through to high current and high
resistance measurements.

8 precision inductance values from 1mH to 10H

For calibration of RCL meters & bridges

Cost effective option

Automated Calibration Using ProCal Software

SPECIFICATIONS

Range

Accuracy
Calibration frequency

See extended specifications for full details

1mH • 10mH • 19mH • 29mH

50mH • 100mH • 1H • 10H

0.5%
1kHz

Measured Value Stored For Accurate Calibration

When the 3000 series inductance option is calibrated, the exact value of
the inductor is measured as Ls up to 1H, Lp above at 1kHz and stored in
memory. This value is recalled and displayed each time a specific
inductor is selected, allowing accurate calibration to be performed.

3000SERIES SIMULATED RES/CAP OPTION

OPTION SIMRC (for 3041/3010)

For dependable readings regardless of the measurement technique and the ultimate in performance the 3000
series uses precision passive resistors and capacitors, with calibrated values for both 2 and 4 wire connections.
Using passive standards also allows confident calibration of AC bridges and removes any difficulty with
tracability.

For the 3010 and 3041 an active simulated option provides for resistance calibration between cardinal points and
gives a continuous resistance range from 30 ohms to 10Mohms, with decade capacitance points up to 10mF.

3000SERIES RTD / PRT SIMULATION OPTION

OPTION PRT (for 3041/3010)

The PRT option makes the calibration of high accuracy resistance
thermometers easy. Simply connect in place of the probe and compare
the displayed value with the calibrated value from the 3000 series
calibrator. Because the calibrator uses passive precision resistors,
reliable readings are guaranteed regardless of the measurement
technique used by the thermometer.

Ultra Accurate Resistance Value

2, 3 or 4 Wire Simulation of Probe

8 Passive Resistance Values

SPECIFICATIONS

Range

Nominal resistance
value

Accuracy

See extended specifications for full details

8

-100°C • 0°C • 30°C • 60°C

100°C • 200°C • 300°C • 800°C

60.25 • 100 • 111.67 • 123.24

138.5 • 175.84 • 247.04 •

375.51 Ohms

0.02°C to 0.08°C

Measured Value Stored For Accurate Calibration

When the 3000 series PRT option is calibrated, the exact temperature
values on the ITS90 scale for Pt-385 resistors is stored in non volatile
memory. This value is recalled and displayed each time a specific
resistor is selected, allowing accurate calibration to be performed.

Temperature Standard :
EN60751:1996 / IEC 60751:1983

Automated Calibration Using ProCal Software

SOURCE

SOURCE

The leads and materials supplied in this measurement set have been
carefully selected to minimise connection/lead errors. The safety of the
leadset is ensured by the use of non-retractable shrouded connectors for
the voltage test lead set.

The leads are stackable to allow connections to be commoned together
where required.

QTY

1 pair
1 pair
1 pair

1
4

4
2
2

SOURCE

USE

Voltage
Current

High Current

Oscilloscope / AC

Adapters

DESCRIPTION

Black & White leads with low thermal 4mm non­retractable shroud safety plugs - gold plated
Black & Red leads fitted each end with 4mm retractable
shroud safety plugs
Low resistance Blue & Yellow leads fitted each end with
4mm retractable shroud safety terminals.

Coax lead fitted each end with BNC connectors
Low thermal Black & Red 4mm plug to spade adapters

Unshrouded open end adapters
4mm plug to cable adapters
BNC to 4mm adapters

3000SERIES THERMOCOUPLE SIMULATION ADAPTER

Superior Thermocouple Simulation Using External Adapter

Temperature gradients / thermal EMFs which can be introduced by
internally mounted thermocouple simulation methods are one of the
greatest sources of error with thermocouple temperature calibration.

For the ultimate in accuracy, Transmille has designed a dedicated
external unit. This keeps the electronics required to generate the low
level signals used for thermocouple simulation as close as possible
to the measuring input of the thermometer. This allows the signal to
be as free from electrical noise as possible, and also eliminates
errors caused by heat generated by surrounding electronics in the
calibrator.

Direct Simulation of 8 Thermocouple Types

Simulates any T/C type using Virtual Front Panel Software

Temperature Standard - EN60584-1 (1996) : Scale - ITS90

Uses neutral (copper) thermocouple plug -

For simulation of any thermocouple type without the
need for compensation cables, avoiding introduction of errors.

CJC sensor built into thermocouple plug

The ultimate in accurate CJC compensation - measures the
temperature at the closest point to the cold junction.

Special care has been taken over the cold junction compensation - a
common source of errors in thermocouple calibration. The cold junction
compensation (CJC) sensor is mounted in the thermocouple plug itself.
By measuring the cold junction at the instruments input allows any type
of thermocouple to be simulated without using compensation cables.

SPECIFICATIONS

1m • 1000VAC/16A • 0.7uV thermals • Gold plated
1m • 150VAC • 16A • Nickel plated brass
1m • 150VAC • 32A • Nickel plated brass

1m • 300VAC • 0.5A • Silver plated
Gold plated

Gold plated
Gold plated

CJC Sensor

SPECIFICATIONS

Type

J
K
T

R
S
B
N
E

Range

-180°C to 150°C
150°C to 750°C

-140°C to 200°C

200°C to 1340°C

-250°C to 400°C

-50°C to 500°C

500°C to 1700°C

-50°C to 1200°C

1200°C to 1700°C

0°C to 1200°C

1200°C to 1820°C

-270°C to 260°C

260°C to 1300°C

0°C to 800°C

EA001

Accuracy

0.05

0.30

0.10

0.35

0.20

0.20

1.00

0.60

1.60

0.10

1.30

0.10

0.40

0.80

9

FUNCTION

RANGE

3050 3041 3010

RESOLUTION

ACCURACY

RANGE

RESOLUTION

ACCURACY

RANGE

RESOLUTION

ACCURACY

DC Voltage

Kilovolt Amplifier (EA3024)*

DC Current

pA Source Adapter (EA013)*
Transconductance Amplifier (EA3012)

AC Voltage

Kilovolt Amplifier (EA3024)*

AC Current

Transconductance Amplifier (EA3012)*

Resistance (Passive)
Resistance (Simulated)*
Capacitance (Passive)
Capacitance (Simulated)*
Inductance (Option)*
Frequency (Std/HiAcc Option*)
Pulse Width / Duty Cycle

Temperature

Thermocouple Simulation (EA001)
PRT/RTD (OPTION PRT) (3041/3010)

Oscilloscope Calibration (SCP250/SCP350/SCP600)

Ampltude
Timebase
Leveled Frequency Sweep
Trigger Output

Power Calibration (PWR50/PWRSINE/PWRDDS)

AC Power
Phase / Frequency Range
DC Power

Optical Tachometer Calibration (3041/3010)

Optical Tachometer Adapter (EA003)

Power Supply Calibration (3041/3010)

PSU Calibration Adapter EA3023 (EA3025)

Pressure Calibration (3041/3010)

Pressure Calibration Modules (TPA001 to TPA018)

Torque Calibration (3041/3010)

Torque Calibration Adapter (EA014)

pA / High Resistance Calibration (3041/3010)

pA / High Resistance Measurement Adapter (EA008)
pA Source Adapter (EA013)

Clamp & Power Meter Calibration

2/10/50 Turn Clamp Coil (EA002)

Multi Function Workstation (EA015) (3041/3010)

Insulation Tester Calibration - Insulation Resistance

Continuity Resistance
Test Voltage Measurement

Process Control Calibrators

Voltage Measurement
Current Measurement
Voltage, Current & Temperature Source

Clamp Meter / Temperature / Optical Tachometer

±0 to 1025V

-

±0 to 20A

-

-

0 to 1020V

10Hz to 100kHz

-

0 to 20A

10Hz to 10kHz

-

0W to 100MW

-

10nF to 1uF

-

-

10Hz to 10MHz

-

0.1uV

-

100pA

-

1uV

-

1nA

-

-

-

-

-

-

-

-

-

Types: J, K, T, R, S, B, N, E • Accuracy 0.05°C • CJC: Auto & Manual - Accuracy 0.1°C • Connection Neutral (Copper) Thermocouple Plug
Range: -100°C to 800 °C • Accuracy 0.01%

Range: 2mV/Div (12mV Pk-Pk) to 50V/Div (300V Pk-Pk) • 1kHz Square Wave or DC • Accuracy 0.01% ± 20uV
Range: 5s to 2ns (Option SCP600) • 5s to 5ns (Option SCP350/SCP250) • Accuracy 5ppm
Range: 50kHz, 5MHz to 250/350/600MHz (dependant on option installed) • Level : 600mV Pk-Pk into 50 Ohms • Accuracy 0.5dbm
Dedicated BNC trigger output for timing & amplitude waveforms

Power Direct / 50 Turn Coil: 20.8kW / 1.04MW (3050): 30.7kW / 1.53MW (3041/3010) • Accuracy 0.05% ± 3.5mW/Volt
Range: 0 to 359.9° • Resolution 0.1° • Accuracy 0.1° • Frequency Range: 10Hz to 1kHz
Power Direct / 50 Turn Coil: 30.7kW / 1.53MW (3041/3010) • Accuracy 0.04% ± 3.5mW/Volt

Range: 60RPM to 60,000RPM • Accuracy 50ppm
Voltage Measurement 0 to 63V (100V) • Current Load 0 to 3A (60A)
Range: 25mBar to 700Bar (10,000PSI) • Accuracy From 0.04%
Range: 0 to 20Nm : Accuracy 0.2%
5 Ranges: 10nA to 100uA • Resolution 1pA • Accuracy 0.02% ± 3 Counts

5 Ranges: 10nA to 100uA • Resolution 1pA • Accuracy 0.02% ± 3 Counts
3 Coils: 2 • 10 • 50 Turn : Magnetically Balanced Design: 10mm (2/10 Turn) 25mm (50 Turn) Internal Dimensions: Accuracy: 0.24%
Range: 0 to 2GOhms • Resolution 10kOhm • Max. 1000V • Accuracy 0.2% to 5MOhm, 3% above

Ranges: 1.9, 10, 19, 100, 190, 1kOhms • Accuracy 0.2% ± 50mOhms
Ranges: 50V, 100V, 250V, 500V, 1kV @ 1mA Load • Accuracy 0.5% ± 2 Counts

Ranges(Resolution): 100mV(1uV), 1V(10uV), 10V(100uV) • Accuracy 0.02% ± 2 Digits
Ranges: 30mA • Accuracy 0.03% ± 2 Digits
See Calibrator Specifications
See Clamp Coil / Thermocouple / Tacho Adapter Specifications

50ppm

-

0.01%

-

0.035%

-

0.07%

-

-

0.005%

-

0.4%

-

-

20ppm

-

0 to 1025V

1 to 10kV

0 to 30A
0 to 100uA
10 to 100A
0 to 1020V

10Hz to 500kHz

1 to 5kV

0 to 30A

10Hz to 10kHz

10 to 70A

0W to 1GW

30W to 10MW

1nF to 10uF

100uF to 10mF

1mH to 10H

1Hz to 10MHz

10 to 90%

0.1uV
10mV

100pA

0.1pA

100uA

1uV

10mV

1nA

100uA

-

100ppm

-

-

-

-

-

25ppm

0.5%

50ppm

200ppm

0.08%

0.035%

0.8%

0.06%

0.08%

40ppm

0.03%

0.25%

0.7%

0.50%

20ppm/1ppm

1ppm

0 to 1025V

1 to 10kV

0 to 30A
0 to 100uA
10 to 100A
0 to 1020V

10Hz to 500kHz

1 to 5kV

0 to 30A

10Hz to 10kHz

10 to 70A

0W to 1GW

30W to 10MW

1nF to 10uF

100uF to 10mF

1mH to 10H

1Hz to 10MHz

10 to 90%

10nV

10mV

10pA

0.1pA
100uA
100nV

10mV

100pA
100uA

-

100ppm

-

-

-

-

-

8ppm

0.5%

50ppm

200ppm

0.08%

150ppm

0.8%

0.04%

0.08%
8ppm

0.01%

0.25%

0.7%

0.50%

20ppm/1ppm

1ppm

10

CONDENSED SPECIFICATIONS

GENERAL SPECIFICATIONS

Warm Up Time
Interface
Line Power
Dimensions / Weight / Warranty

Best 1 year absolute accuracy including cal bration uncertainties : * Optional : Due to continuous development specifications may be subject to change.

Double the time since last turned on up to 20 minutes maximum
RS232 • GPIB (option) • USB (option)
110 / 230V (28Watts standby)
45cm x 44cm x 14cm / 16.5kg / 3 Years warranty parts & labour cover

Safety
EMC

Designed to EN61010-1:2001
CE Marked
EN55011:1998
EN61326:1998

For extended
specifications

contact your local

representative or visit

www.transmille.com

11

3000SERIES 2 /10 / 50 CLAMP COIL ADAPTER

EA002

SOURCE MEASURE

3000SERIES MULTI FUNCTION WORKSTATION

(For 3041/3010) EA015

Designed for the calibration of both wound AC & Magnetic field hall

Ü

2

10

Ü

effect AC/DC clamp meters the Transmille current coil offers several unique
features built in a robust construction, complete with alignment table for
ease of use.

Ü

Ü

50

Calibrates Clamp Meters up to 1000A with 3050

Calibrates Clamp Meters up to 1500A with 3041/3010

SPECIFICATIONS

Configuration

Type
Internal Dimensions

Maximum Current
Duty Cycle @ 20A
Maximum RMS Voltage
Frequency Range
Accessories

See extended specifications for full details

2 Turn (LHS)

10 Turn (RHS)

50 Turn (Centre)

High Accuracy Balanced

10mm (2/10 Turn)

25mm 50 Turn

70% On / 30% Off

DC to 500Hz

Detachable platform with

alignment marks

(Size 275x295x45mm)

40A

4V

Calibrates Clamp Meters up to 2000A with EA3012

2 / 10 / 50 Turn Coils

High Accuracy AC/DC Balanced Design

Wide range of clamp sizes covered

Includes alignment table for repeatable readings

Innovative Closed Construction Design

Three coils in one provide the ability to calibrate a wide range of coils,
from small lower clamps down to 10mm jaw diameter to larger current
clamps. The low inductance, low resistance properties allow the
calibrators to easily drive the coil, giving plenty of overhead for calibrating
older clamps. The coils are fully enclosed in a strong, robust and compact
plastic enclosure preventing mechanical damage. This rugged design is
ideal for using the coil on-site and in harsh environments.

3000SERIES OPTICAL TACHOMETER CALIBRATION ADAPTER

EA003 (for 3041/3010)

High intensity LED light source

Direct keyboard input in RPM

Range : 60 to 60,000 RPM

Using a high intensity LED light source, optical
tachometers can be calibrated quickly and easily. Simply enter the RPM value
using the calibrator keypad or use with ProCal software for automated calibration.

SPECIFICATIONS

Light source
Range
Duty Cycle
Accuracy

See extended specifications for full details

3000SERIES HUMIDITY & TEMPERATURE SENSOR ADAPTER

EA016 (for 3041/3010)

SPECIFICATIONS

Humidity
Accuracy

Temperature
Accuracy

See extended specifications for full details

10% to 90%

0°C to 50°C

0.3°C

12

2%

Humidity measurement
10% to 90%

Temperature measurement
0°C to 50°C

Ideal for monitoring laboratory environment allowing
measurements to be made automatically and stored with
calibration results.

SOURCE

High intensity LED

60 to 60,000 RPM

20% on / 80% off

50ppm

MEASURE

The calibration workstation provides a central work area with all
connections routed conveniently to remote terminals mounted at the
front of the adapter. The adapter extends the functionality of the
calibrator to include :

2 / 10 / 50 TURN CLAMP COIL

Ü

INSULATION RESISTANCE

Ü

CONTINUITY RESISTANCE

Ü

INS. TEST VOLTAGE MEASUREMENT

Ü

CONTINUITY CURRENT MEASUREMENT

Ü

OPTICAL TACHOMETER CALIBRATION

Ü

THERMOCOUPLE SIMULATION

Ü

VOLTAGE MEASUREMENT : 3 RANGES

Ü

CURRENT MEASUREMENT TO 30mA

Ü

CALIBRATOR OUTPUT ROUTING

Ü

VOLTAGE, CURRENT AND HIGH CURRENT TO
DEDICATED WORKSTATION TERMINALS

Incorporating the advanced clamp coil, thermocouple simulation and tachometer calibration adapters as well as
process control source / measure capabilities, this workstation adapter provides a versatile platform for efficient
calibration of a wide range of equipment.

Clamp Meters

Using the built in 2, 10 and 50 turn coils, clamp meters can be accurately and quickly
calibrated. Using a high accuracy balanced design both wound (AC only) & Magnetic
field (hall effect) AC/DC clamp meters can be calibrated. Three coils in one provide the
ability to calibrate a wide range of coils, from small lower clamps down to 10mm jaw
diameter to larger 2000A clamps.

Insulation Testers

Insulation tester calibration is a common requirement and is now easy to perform using
the workstation. Insulation to 2GOhms @ 1000V and continuity to 1kOhm is available
from dedicated terminals. Using the measurement capabilities of the adapter interface,
the workstation also provides insulation test voltage measurement to 1000V and
continuity current measurement.

Process Control Calibrators

Source/measure process control calibrators
are commonplace in industry and previously
required several references to calibrate. The
workstation integrates all the functions
required to both source and measure the
required signals.

Digital Thermometers

Digital thermometers can be easily calibrated
accurately using the workstation’s built in
thermocouple simulation output with automatic
cold junction compensation.

Optical Tachometers

Using a high intensity LED light source, optical
tachometers can be calibrated quickly and
easily using the workstation. Simply type in
RPM value using the calibrator keypad or use
with ProCal software for automated calibration.

SPECIFICATIONS

Clamp Meter Calibration

Range

Insulation Tester Calibration

Continuity Resistance
Insulation Resistance
Continuity Current Measurement
Insulation Test Voltage Measure

Digital Thermometer
Calibration

Process Control Calibration

DCV Measurement
DCI Measurement
DCV/I Source From Calibrator

Optical Tachometer Calibration

Range

See extended specifications for full details

2 / 10 / 50 Turn Coil

Up to 1500A

Up to 1kOhm

Up to 2GOhms / 1000V

Up to 300mA

Up to 1000V

J, K, T, R, S, B, N, E

100mV/1V/10V Ranges

30mA Range

AC/DC 1000V • 30A

60 to 60,000 RPM

13

3000SERIES 3A POWER SUPPLY CALIBRATION ADAPTER

EA3023 (for 3041/3010)

An essential option for simplifying calibration of power supplies.
The PSU adapter can measure the output voltage and also provides a
precision electronic current load allowing volts, current and even output
resistance to be calibrated by one compact unit. 4 wire connection
ensures accuracy and repeatability.

MEASURING PSU OUTPUT VOL TAGE

The adapter measures the power supply’s output voltage using the
internal high accuracy A/D converter built into the 3000 Series.

SOURCE MEASURE

SOURCE

3000SERIES AC / DC TRANSCONDUCTANCE AMPLIFIER

Controlled by ProCal or Virtual Front Panel Software

Stackable for higher currents

0.08% Accuracy

Low noise linear MOSFET technology

EA3012 (for 3041/3010)

CALIBRATING PSU CURRENT METER

The adapter provides a precision electronic load controlled by the
calibrator. To calibrate the power supply output current meter, simply
set the required load current and record the meter reading.

DETERMINING PSU OUTPUT RESISTANCE/VOLTAGE DROP

By measuring a power supply’s on load / off load voltages, the output
resistance of the PSU can easily be measured.

SPECIFICATIONS

Voltage Measurement
Resolution
Best 1 Year Accuracy

Current Load Range
Best 1 Year Accuracy

Notes

See extended specifications for full details

±0.02% of Setting

± 0.05% of Setting
Virtual Front Panel

(supplied)

or ProCal Control

0 to 63V

10mV

0 to 3A

The operation is controlled using a PC running either the Virtual front
panel program (supplied) or ProCal software. ProCal procedure wizard
available for automatic procedure generation.

Measure Output voltage to 63 Volts

Active Current load to 3 Amps

Measures output Resistance

Connects to Adapter Interface on calibrator

Used with virtual front panel or ProCal Software

3000SERIES 60A POWER SUPPLY CALIBRATION ADAPTER

EA3025 (for 3041/3010)

SOURCE MEASURE

Up to 100A DC • 75A AC Output

Calibration of up to 2000A clamp meters using 50 turn coil

Ideal for calibrating high power current shunts & current meters

The EA3012 is a powerful linear transconductance amplifier designed
exclusively for use with the 3000 Series calibrators which provides a
cost effective solution to calibrating high currents instruments.
Connecting to the 3000 Series calibrator using the feature connector,
the EA3012 extends the output current range to 100A DC / 75A AC ­higher currents are available by paralleling EA3012 amplifiers as
required to give the current output needed.

Use of linear technology throughout gives a very low noise output
completely free from switching spikes. The latest in high power
MOSFET design ensures reliable and stable operation even into
inductive loads. Long term accuracy is assured by using precision foil
resistors and a custom manufactured internal shunt.

SOURCE

3000SERIES AC / DC KILOVOLT AMPLIFIER

SPECIFICATIONS

AC Output
DC Output
AC/DC Accuracy
Compliance Voltage
Frequency

Power Consumption
Cooling

See extended specifications for full details

70A Maximum

100A Maximum

0.08%

6V Pk-Pk

DC to 400Hz

1kW

Internal Fan

EA3024 (for 3041/3010)

SPECIFICATIONS

Voltage Measurement
Resolution
Best 1 Year Accuracy

Current Load Range
Best 1 Year Accuracy

Notes

See extended specifications for full details

14

0 to 100V

10mV

±0.02% of Setting

0 to 60A

± 0.05% of Setting

Virtual Front Panel

(supplied)

or ProCal Control

Extending on the capabilities of the EA3023, the EA3025 provides an
easy to use solution for the calibration of high current power supplies.
This adapter overcomes many of the problems associated with measuring
higher output currents required

Traditional techniques of using high current low value load resistors and
current shunts can result in unstable/inaccurate readings even with small
voltage fluctuations from the power supply or variations in connection and
lead resistance. The manual nature of this method of calibration is both
time consuming and prone to accidental damage of the load resistor and
measurement equipment.

The three advantages of using the EA3025 are :

1) Provides an accurate, stable electronic current load regardless of the
power supply output voltage and lead/ connection resistances.

2) Removes the need for high power load resistors of appropriate values

3) Allows automation for more efficient calibration

Measure Output voltage to 100 Volts

Active Current load to 60 Amps

Measures output Resistance

Applications include Battery & UPS testing

Connects to Adapter Interface on calibrator

Used with virtual front panel or ProCal Software

The EA3024 kilovolt amplifier provides the solution to the
calibration of high voltage probes and dividers. The
amplifier/calibrator combination is used with Virtual Front Panel

(supplied) or ProCal software.

DC Output 1 to 10 kVolts

AC Voltage 1 to 5 kVolts

Controlled by ProCal or Virtual Front Panel Software

Connect for DC or AC output is via independent sockets, with each socket having an individual LED
indicator. The ground connection is a 4mm terminal post.

SPECIFICATIONS

AC Output
DC Output
AC/DC Accuracy
Output Current
Frequency

See extended specifications for full details

5kV Maximum

10kV Maximum

0.5%

100uA

DC / 40 to 60Hz

15

3000SERIES PRESSURE MEASUREMENT MODULES

TPM001 to TPM018 & OPTION PUMP (for 3041/3010)

The 3041 and 3010 support pressure calibration using a range of 17
available pressure modules, which connect directly to the calibrator. The
pressure modules cover the range from 25mBar to 10000Bar. A 5psi

differential module and a ± 1Bar vacuum module are available. A hand
pressure/vacuum pump is available as an option to generate pneumatic
pressure up to 60Bar and vacuum down to -0.95Bar.

Pressure measurement from 25mBar to 10,000PSI.
Accuracy to 0.04% (dependant on pressure module)
Optional Hand Pressure/vacuum pump available.
Direct connection to Calibrator adaptor interface

MEASURE

3000SERIES HIGH RESISTANCE/pA MEASUREMENT ADAPTER

MEASURE

Accurate current measurement down to pico amp levels

Ideal for high value resistance measurement to 1TOhm
Five ranges from 10nA to 100uA
Supplied with VFP Software

The high resistance / pA measurement adapter eliminates the need for a
separate electrometer instrument. The low cost EA008 provides 5 current
measurement ranges down to 10nA with a resolution of 1pA and
incorporates a ‘virtual ground’ input, avoiding errors due to input
impedance.

EA008 (for 3041/3010)

SPECIFICATIONS

Use with VFP software or ProCal
Supports all pressure units

Pressure Range

Accuracy
Hand Pump

See extended specifications for full details

25mB to 10,000 PSI

(Dependant on Transducer)

From 0.04%

-0.95 Bar to 60 Bar

Pressure modules are supplied with calibration coefficients, up to 3
coefficients can be stored into the calibrator to allow direct display of
pressure. An unlimited number may be stored in the VFP or ProCal
software. Calibration of a pressure gauge can easily be performed by
connecting the hand pump to both the pressure module and the gauge
under test, apply pressure and compare readings from the gauge against
the reference pressure module for both rising and falling pressure.

3000SERIES TORQUE CALIBRATION ADAPTER

EA014 (for 3041/3010)

Accuracy 0.2%

Easy to Use with Virtual Front Panel or
ProCal Software

Supports different units e.g. mNm, ftlb, etc.

By connecting a torque calibration adapter to the 3000 series
calibrator torque calibration can be performed. Housing an external
transducer for torque calibration allows torque screwdrivers up to

SPECIFICATIONS

Torque Range
Accuracy

See extended specifications for full details

0 to 20Nm

0.2%

20Nm to be calibrated.
Operation is controlled from the interface using either the Virtual front

panel program or ProCal software. The software reads back the
voltage signal from the transducer which is converted to torque units
and displayed on the PC screen.

MEASURE

Using the high voltage output from the 3000 Series calibrator together with
the current measurement capability of the EA008 allows high accuracy
resistance measurements to be made at any voltage up to 1000V.

The virtual front panel program supplied as standard with the adapter
provides a familiar user interface with all the features such as null,
filter and auto range.

Using the popular ProCal calibration software, the EA008 adapter can
be used with automated procedures for comprehensive calibration of
pA signals or high
resistances.

SOURCE

3000SERIES PICOAMP SOURCE ADAPTER

Ideal for calibrating electrometers
Source accurate current down to pico amp level
Low open circuit compliance voltage
Safe to use on sensitive input circuits.
Supplied with VFP Software

SPECIFICATIONS

Ranges
Resolution

Accuracy
Operation

See extended specifications for full details

10nA • 100nA • 1uA • 10uA • 100uA

1pA • 10pA • 100pA • 1nA • 10nA

0.5%

Virtual front panel or

ProCal software

EA013 (for 3041/3010)

3000SERIES CARRY CASE / TRANSIT CASE

OPTION SOFTCASE / OPTION TRANCASE

Designed for transporting the 3000 Series calibrators this
rugged transit case is suitable for shipping the 3000 series
as well as protecting the calibrators in particularly harsh
environments (oil rigs etc.). The hard wearing design
includes extra corner protection and a locking mechanism.

Soft carry case - for on site calibration

Designed for carrying the 3000 Series calibrators
when working on-site, the soft carry case includes side
pockets, a large top pocket and carry strap.
The lightweight design of the calibrator allows easy

16

carrying of the unit.

Robust transit case - suitable for shipping

Provide accurate calibration of sensitive electrometers and low level pico
amp meters safely & quickly with this purpose designed option.

A unique and ingenious circuit designed to convert the accurate voltage
output from the calibrator into low noise precision currents without the use
of the destructive high voltages and unstable high value resistors often
used. Yet another example of Transmille's pioneering ideas and designs
for providing solutions to some of the common problems faced by
calibration laboratories everywhere.

Automate Electrometer

Calibration with

ProCal software

SPECIFICATIONS

Ranges
Resolution

Accuracy
O/C Compliance
Operation

See extended specifications for full details

10nA • 100nA • 1uA • 10uA • 100uA

1pA • 10pA • 100pA • 1nA • 10nA

Virtual front panel or ProCal software

0.5%
10V

17

PROFESSIONAL CALIBRATION AND LABORATORY MANAGEMENT SOFTWARE

AUTOMATED CALIBRATION WITH EASY TO USE SOFTWARE FOR WINDOWS 98/ME/XP

®

THE COMPLETE CALIBRATION SOLUTION

LABEL PRINTING &

BARCODE SUPPORT

GRAPHICAL MEASUREMENT SCREENS

ACCREDITED (ISO17025) / TRACEABLE /
CONFORMANCE / SAFETY CERTIFICATES,
TEST REPORTS WITH COLOUR LOGOs

FLEXIBLE UNCERTAINTY
CALCULATION METHODS

6 RECALL LETTERS

5 GOODS DISPATCH

Dispatch Note,
Job Completion Form, etc.

1 GOODS INWARDS

Microsoft

Access Database

4 JOB PAPERWORK

Calibration label with

logo and barcode

2 PROCEDURE

WRITING

3 CALIBRATION

Certificate, Service Log,

Certificate of Conformance

TOTAL LABORATORY MANAGEMENT

LABEL PRINTING &

BARCODE SUPPORT

COMPREHENSIVE VIRTUAL JOB SHEET

SERVICE REPORTS,
DESPATCH NOTES, RECALL LETTERS,

FAST , EFFICIENT BOOKING IN

QUOTES & OTHER JOB PAPERWORK

NETWORKABLE SYSTEM - CAN BE USED
THROUGHOUT THE LABORATORY & OFFICE

MULTI-DISCIPLINE :: CAN BE USED FOR
ELECTRICAL, PRESSURE, TEMPERATURE,
DIMENSIONAL AND MORE...

M3003 / GUM COMPLIANT UNCERTAINTY
CALCULATIONS

CONTROLS A WIDE RANGE OF INSTRUMENTS
USING GPIB / RS232 INTERFACE

MULTI LANGUAGE

CRYSTAL REPORTS SUPPORT - CREATE CUSTOM

®

CERTIFICATES & OTHER REPORT DESIGNS

INTEGRATES WITH PROCAL-TRACK FOR TOTAL
JOB CONTROL

FAST PROCEDURE CREATION & TESTING USING
BUILT-IN WIZARDS

3000 Series

Virtual Front Panel

The Virtual Front Panel

allows full control

of all calibrator

functions from a P.C.

Expands the functionality
of the 3000 Series
calibrators (with optional
adaptors).

The World’s most

portable calibration system

GOODS INWARD & ACCESSORIES MANAGEMENT

(WITH BARCODE SCANNING)

CENTRALISED PAPERWORK PROCESSING AND

DESPATCH (WITH BARCODE SCANNING)

COMPREHENSIVE FORMS,

REPORTS & LABELS

RECALL LETTER SYSTEM

SUB CONTRACT WORK HANDLING

DIGITAL PHOTO DISPLAY

CRYSTAL REPORTS SUPPORT - CREATE CUSTOM

®

CERTIFICATES & OTHER REPORT DESIGNS

MULTI LANGUAGE

18

19

TRANSMILLE :: THE CALIBRATION SPECIALISTS

Transmille has over a decade’s experience in calibration and instrumentation
design & manufacture. Our products are in use throughout the world in both
commercial and military laboratories, service centers and production facilities.
Our reputation for innovation, reliability & value is second to none with complete
solutions including instrumentation, software, support & training.

Each calibration product is supplied with a complete UKAS certification
direct from our in house UKAS laboratory and is fully traceable to UK
National Standards. A network of Transmille representatives is available
worldwide to service your requirements - please visit www.transmille.com
for your regional sales office.

0324

3010

3010-SYS 3010 MULTI PRODUCT CALIBRATOR (8ppm) + UKAS Calibration Certificate

3041

3041-SYS 3041 MULTI PRODUCT CALIBRATOR (25ppm) + UKAS Calibration Certificate

INTERNAL OPTIONS OPTION PWRSINE AC (SINE) / DC POWER CALIBRATION OPTION

EXTERNAL OPTIONS OPTION EA001 THERMOCOUPLE SIMULATION ADAPTER

3010 MULTI PRODUCT CALIBRATOR (8ppm) + UKAS Calibration Certificate

WITH PWRSINE, PRT, EA001(THERM) AND SIMULATED RESISTANCE/CAPACITANCE OPTIONS INC. UKAS

3041 MULTI PRODUCT CALIBRATOR (25ppm) + UKAS Calibration Certificate

WITH PWRSINE, PRT, EA001(THERM) AND SIMULATED RESISTANCE/CAPACITANCE OPTIONS INC. UKAS

OPTION PWRDDS AC/DC DDS SYNTHESISED POWER OPTION
OPTION SCP350 350MHz OSCILLOSCOPE OPTION
OPTION SCP600 600MHz OSCILLOSCOPE OPTION
OPTION PRT PRT/RTD SIMULATION OPTION
OPTION IND INDUCTANCE CALIBRATION OPTION
OPTION FRQ 1ppm HIGH STABILITY CRYSTAL REFERENCE
OPTION SIMRC SIMULATED RESISTANCE & CAPACITANCE OPTION

OPTION EA002 2/10/50 TURN CLAMP COIL + ALIGNMENT PLATFORM
OPTION EA003 OPTICAL TACHOMETER CALIBRATION ADAPTER
OPTION EA008 HIGH RESISTANCE / pA MEASUREMENT ADAPTER*
OPTION Ea013 pA SOURCE CALIBRATION ADAPTER*
OPTION EA014 TORQUE CALIBRATION ADAPTER*
OPTION EA015 MULTI FUNCTION WORKSTATION
OPTION EA016 HUMIDITY & TEMPERATURE SENSOR
OPTION EA017 4 CHANNEL OSCILLOSCOPE TEST HEAD
OPTION EA3012 AC/DC TRANSCONDUCTANCE AMPLIFIER)*
OPTION EA3023 3A/63V POWER SUPPLY CALIBRATION ADAPTER*
OPTION EA3024 AC/DC KILOVOLT AMPLIFIER*
OPTION EA3025 60A/100V POWER SUPPLY CALIBRATION ADAPTER*
OPTION TPA001 to TPA018 PRESSURE CALIBRATION MODULES - SEE WEB SITE FOR LIST
OPTION PUMP PRESSURE HAND PUMP

* Supplied complete with VFP software. All products supplied with UKAS certificate unless otherwise specified.

+ STD Cert

+ STD Cert

+ STD Cert

3050

INTERNAL OPTIONS OPTION SCP250 250MHz OSCILLOSCOPE OPTION

EXTERNAL OPTION OPTION COIL 2/10/50 TURN CLAMP COIL WITH ALIGNMENT PLATFORM

3050 MULTI PRODUCT CALIBRATOR (50ppm)

Complete with THERMOCOUPLE ADAPTER & UKAS Calibration Certificate

OPTION PWR50 AC/DC POWER CALIBRATION (SINE) OPTION

ACCESSORIES

OPTION SOFTCASE SOFT CARRY CASE
OPTION TRANCASE HARD TRANSIT CASE
OPTION 3000LEAD PRECISION LEAD SET
OPTION USB RS232 TO USB CONNECTION LEAD
OPTION GPIB GPIB INTERFACE OPTION
OPTION RACK 19inch RACK MOUNT KIT

SOFTWARE

3000VFP 3000 SERIES VIRTUAL FRONT PANEL
PC-SU PROCAL PROFESSIONAL CALIBRATION SOFTWARE

MCD MULTIMETER CALIBRATION PROCEDURE CD
ECD ELECTRICAL TEST EQUIPMENT CALIBRATION PROCEDURE CD
SCD OSCILLOSCOPE CALIBRATION PROCEDURE CD

PCT-SU PROCAL-TRACK LABORATORY MANAGEMENT SOFTWARE

SEE SOFTWARE BROCHURE FOR NETWORK SYSTEMS OR VISIT WEBSITE

TRANSMILLE - 158 Brentwood Drive, Colchester, Vermont 05446

phone: [phone] fax: [phone]

E-Mail: [e-mail] - En Español: [e-mail]

ORDERING INFORMATION

Due tocontinuous development specifications are subject tochange - Windows is a registered trademarkof Microsoft Corporation - All other productnames mentioned herein may be trademarksof their respective companies

www.TransmilleCalibration.com