Transmille EA002 Operating Manual

EA002

2 / 10/ 50 TURN 1500A CLAMP COIL ADAPTER

Ü

OPERATION MANUAL

EA002

2 / 10 / 50 Clamp Coil Adapter

Operation Manual

Version 1.00
April 2007
All product names are trademarks of their respective companies

EA002 2 / 10 / 50 CLAMP COIL ADAPTER
OPERATION MANUAL

Guarantee and service

Transmille Ltd. guarantees this instrument to be free from defects under normal use
and service for a period of 1 years from purchase. This guarantee applies only to
the original purchaser and does not cover fuses, or any instrument which, in
Transmille’s opinion, has been modified, misused or subjected to abnormal
handling or operating conditions.

Transmille’s obligation under this guarantee is limited to replacement or repair of an
instrument which is returned to Transmille within the warranty period. If Transmille
determines that the fault has been caused by the purchaser, Transmille will contact
the purchaser before proceeding with any repair.

To obtain repair under this guarantee the purchaser must send the instrument in its
original packaging (carriage prepaid) and a description of the fault to Transmille at
the address shown below. The instrument will be repaired at the factory and
returned to the purchaser, carriage prepaid.

Note :
TRANSMILLE ASSUMES NO RESPONSIBILITY FOR DAMAGE IN TRANSIT

THIS GUARANTEE IS THE PURCHASER’S SOLE AND EXCLUSIVE GUARANTEE
AND IS IN LEIU OF ANY OTHER GUARANTEE, EXPRESSED OR IMPLIED.
TRANSMILLE SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL
OR CONSEQUENTIAL DAMAGES OR LOSS.

Transmille Ltd.
Unit 4, Select Business Centre
Lodge Road
Staplehurst
Kent
TN12 0QW
United Kingdom

Tel : [phone]
Fax : [phone]

EMail : [e-mail]
Web : www.transmille.com

Transmille Ltd. Page 2

EA002 2 / 10 / 50 CLAMP COIL ADAPTER
OPERATION MANUAL

TABLE OF CONTENTS

GUARANTEE AND SERVICE...............................................................................................................2

EA002 CLAMP COIL ADAPTER...........................................................................................................4

THEORY OF OPERATION....................................................................................................................4

HIGH ACCURACY DESIGN..................................................................................................................5

CALCULATING CLAMP METER ACCURACY. .............................................................................................5

INNOVATIVE CLOSED CONSTRUCTION DESIGN........................................................................................5

CONNECTION DIAGRAMS...................................................................................................................6

Terminal Configuration on rear of EA002 Coil Adapter.................................................................6

3000 Series 2A Terminals to 10 Turn Coil (Up to 20A simulation using coil)................................7

3000 Series 30A* Terminals to 10 Turn Coil (Up to 300A* simulation using coil).........................7

3000 Series 2A Terminals to 50 Turn Coil (Up to 100A simulation using coil)..............................7

3000 Series 30A* Terminals to 50 Turn Coil (Up to 1500A* simulation using coil).......................8

3000 Series 2A Terminals to 2 Turn Coil (Up to 4A simulation using coil)....................................8

3000 Series 30A* Terminals to 2 Turn Coil (Up to 60A* simulation using coil).............................8

CARE & MAINTENANCE......................................................................................................................9

Cleaning the Adapter.....................................................................................................................9

Handling Precautions.....................................................................................................................9

Servicing Information.....................................................................................................................9

Appendix A : Specifications

Transmille Ltd. Page 3