Transmille EA001A Specifications

EA001A Extended Specifications TRANSMILLE LTD

K

General Specifications

Adaptor connection

Connects to male 'D' type adapter interface connector on 3000A Series front panel

Indicators Incorporates 'Active', 'Measure' & 'Source' LED's mounted in the adaptor case
Adaptor Dimensions 17cm x 12cm x 3.5cm
Connections 1 x 9 way male 'D' type connector

1 x Neutral (copper) industry standard thermocouple plug
with integral temperature senso

r

1 x Neutral (copper) industry standard thermocouple socket

with integral temperature sensor
Connection to Calibrator Via supplied 9 Way male to female serial lead (straight through connection)
Sensor Type

Thermistor

Sensor incorporated into thermocouple plug to eliminate any lead effects
Output impedance 10 Ohms

Thermocouple Range 90 Day

1

180 Day

1

1 Year

1

2 Year

Type Source / Measure Rel. (°C) Rel. (°C) Rel. (°C) Rel. (°C)

J -210°C to -100°C 0.18 0.21 0.23 0.32

-100°C to -30°C 0.09 0.10 0.11 0.15

-30°C to 150°C 0.07 0.08 0.09 0.13

150°C to 760°C 0.11 0.13 0.14 0.20

760°C to 1200°C 0.15 0.17 0.19 0.27

-200°C to -100°C 0.22 0.24 0.27 0.38

-100°C to -25°C 0.12 0.14 0.15 0.21

-25°C to 120°C 0.09 0.10 0.11 0.15

-120°C to -1000°C 0.16 0.18 0.20 0.28
1000°C to 1370°C 0.21 0.23 0.26 0.36

T -250°C to -150°C 0.48 0.54 0.60 0.84

-150°C to 0°C 0.08 0.09 0.10 0.14
0°C to 120°C 0.07 0.08 0.09 0.13

-120°C to 400°C 0.09 0.10 0.11 0.15

R -0°C to 250°C 0.64 0.72 0.80 1.12

250°C to 1000°C 0.35 0.40 0.44 0.62

1000°C to 1760°C 0.41 0.46 0.51 0.71

S 0°C to 250°C 0.64 0.72 0.80 1.12

250°C to 1000°C 0.35 0.40 0.44 0.62

1000°C to 1760°C 0.41 0.46 0.51 0.71

1

B 600°C to 800°C 0.58 0.66 0.73 1.02

800°C to 1000°C 0.52 0.59 0.65 0.91
1000°C to 1550°C 0.43 0.49 0.54 0.76
1550°C to 1820°C 0.44 0.50 0.55 0.77

Note 1 : Does not include cold junction compensation errors
Cold Junction Compensation Error = ± 0.2°C
All thermocouple measurement specifications assume correct compensation cable is being used
Specifications apply between 17°C and 27°C.
Outside this range an allowance of 0.18 x 1 Year Spec. per °C should be added.
All specifications apply for 3000A Firmware Version 12.2.3 onwards

EA001A Extended Specifications
Due to continuous development specifications may be subject to change.

Page 1 of 2 - V 1.0