Transmille EA001 Data sheet

EA001 Thermocouple Simulation Extended Specifications TRANSMILLE LTD

General Specifications

Adaptor connection

Connects to male 'D' type adapter interface connector on 3000 Series front panel

Indicators Incorporates an 'Active' LED mounted in the adaptor case Adaptor Dimensions 12.5cm x 6.5cm x 2.5cm Connections 1 x 9 way male 'D' type connector

1 x Neutral (copper) industry standard thermocouple plug

with integral temperature sensor Connection to Calibrator Via supplied 9 Way male to female serial lead (straight through connection) Sensor Type Thermistor

Sensor incorporated into thermocouple plug to eliminate any lead effects Output impedance 10 Ohms

Thermocouple Range

90 Day

180 Year

1 Year

2 Year

Type Rel. (°C) Rel. (°C) Rel. (°C) Rel. (°C)

J -180°C to 150°C 0.04 0.05 0.05 0.07

150°C to 750°C 0.24 0.27 0.30 0.42

K -140°C to 200°C 0.08 0.09 0.10 0.14

200°C to 1340°C 0.28 0.32 0.35 0.49

T -250°C to 400°C 0.16 0.18 0.20 0.28 R -50°C to 500°C 0.16 0.18 0.20 0.28

500°C to 1700°C 0.80 0.90 1.00 1.40

S -50°C to 1200°C 0.48 0.54 0.60 0.84

1200°C to 1700°C 1.28 1.44 1.60 2.24

B 0°C to 1200°C 0.08 0.09 0.10 0.14

1200°C to 1820°C 1.04 1.17 1.30 1.82

N -270°C to 260°C 0.08 0.09 0.10 0.14

260°C to 1300°C 0.32 0.36 0.40 0.56

E 0°C to 800°C 0.64 0.72 0.80 1.12

Note 1 : Does not include cold junction compensation errors All thermocouple simulation specifications ± 2uV. Cold Junction Compensation Error = ± 0.2°C

Specifications apply between 17°C and 27°C. Outside this range an allowance of 0.18 x 1 Year Spec. per °C should be added.

EA001 Thermocouple Simulation Extended Specifications Due to continuous development specifications may be subject to change.

V4.20