Transmille 8100 User Manual
8100 SERIES
ADVANCED 8.5 / 7.5 DIGIT
MULTIMETER
www. transmille.com
8100 SERIES ADVANCED PRECISION
MULTIMETER
The 8100 Series is aimed at laboratories, manufacturers and design facilities
requiring a wide range of measurement parameters with specications as low
as 4ppm.
The 8100 is designed with metrologists in mind, with great care taken in the
design of sensitive input electronics. Ultra low input bias current on DC Voltage
inputs minimise errors when utilised as a null meter with Resistive Dividers, and
High Input Impedance on AC Voltage up to 10V reduces errors when measuring
current through use of current shunts to enable the 8100 Series ensuring
reliable measurements across multiple functions.
Dynamic display of accuracy, measurement uncertainty, standard deviation
and more provide metrologists with immediate feedback of their measurement
and enable users to maximise performance while improving condence in
measurements.
KEY FEATURES
• Large full colour screen
• USB, GPIB (IEEE 488), RS232 and Ethernet Interfaces as standard
• 30A DC/AC Current Ranges without the need for external shunts
• Enhanced Maths functionality
• Dynamic display of Accuracy & Measurement Uncertainty
• Programmable Front / Rear Terminals with Ratio Functionality (8104 Only)
• Electrometer input for currents ranges down to 10nA (8104 Only)
8100 SERIES HIGHLIGHTS
FULL COLOUR SCREEN
The 8100 has been designed around ease
of use. Utilising a large full colour screen
enables clear display of measurements,
LOW THERMAL BINDING POSTS
Fitted with low thermal beryllium copper
terminals, the 8100 Series enables connection
with 4mm banana jacks, spades and bare
wire without the need for additional adapters.
menus and more.
EXTENDED RANGES
The 8100 Series oers the
widest range of inputs of any
multimeter on the market,
with current input of 30A
without the need for external
current shunts and dedicated
low noise electrometer input
SOFTWARE COMPATIBILITY
The 8100 Series features an advanced
command set including emulation modes for
popular remote languages. This enables the
8100 Series to be used with Legacy metrology
software that does not yet support Transmille
equipment.
As with all Transmille products, compatibility
with ProCal calibration software is
guaranteed.
www. transmille.com
ACTIVE TERMINAL INDICATORS
Clear conrmation of active terminals
to simplify connections. A feature on all
Transmille products since 2004
7.2” HIGH RESOLUTION COLOUR SCREEN
Clear, easy to read LED backlit screen
with enables display of advanced
measurement statistics and provides
an intuitive menu structure
CARRY HANDLES
Rugged handles protect input
connections and assist movement
around the laboratory
USB, GPIB, RS232 AND LAN REMOTE
INTERFACES AS STANDARD
Transmille’s ProCal software
provides auto conguration for
the 8100 Series when connected
over the convenient USB interface,
and the GPIB (IEEE-488) interface
enables integration into Legacy
Systems. Looking to the future,
the LAN interface control over a
local network
QUICK SELECT KEYS
Immediate and direct access
to the required range through
dedicated soft keys
ADVANCED MATHS FUNCTIONALITY
The 8100 Series features
advanced maths functionality
including standard deviation,
number of samples, rolling
average and much more.
All measurement parameters are
viewable on the clear screen and
fully user congurable
Loading...