Transforming Technologies Ohm Metrics SRM 310 Instruction Manual
T R A N S F O R M I N G T E C H N O L O G I E S , L L C
O U T S T A N D I N G A L T E R N A T I V E S I N S T A T I C C O N T R O L
Pocket Resistance Meter
Model SRM 310
Instruction Manual
Ohm Metrics™
Contents
1 Description
SRM 310 1
Ohm Metrics 1
2 Operation
Battery Installation 2
Measuring Surface Resistance 2
Measuring Resistance to Ground 2
Measuring Two Point Resistance 3
LED Indication Guide 4
Calibration 4
3 Parts Included List 4
4 Specifications 4
5 Service and Warranty 5
1
Description
Ohm Metrics Pocket Resistance Meter:
SRM 310
This SRM 310 uses parallel electrodes and concentric
rings to accurately measure RTT, RTG, or resistivity for
periodic verification, factory audits or test lab evaluation
of product.
This meter is designed to verify incoming materials such
as floor mats, table mats, bins and shelving in static controlled areas. Work surfaces, bags, wrist straps, footwear,
packaging materials, garments, and ESD chairs can also
be tested with the device.
The SRM310 meets periodic test requirements per Compliance Verification ESD TR53 and conforms to ANSI/EOS/
ESD (S4.1, S7.1, S12.1, S2.1).
Ohm Metrics test and measurement products, from
Transforming Technologies, are useful, reliable tools for
characterizing and identifying the electrical resistance of
materials and the performance of personal grounding
products.
All Ohm Metrics products are designed to support
ESDA Compliance Verification TR53.
All Ohm Metrics products can be calibrated.
All Ohm Metrics test and measurement products are
warranted for 1 full year.
Loading...