Transcend StoreJet 25M3 USB 3.0 750GB User Manual
User’s Manual
2.5" External Hard Drive
StoreJet® 25M3
(Version 1.1)
Table of Contents
Introduction︱︱︱︱ ......................................................................................1
Package Contents︱︱︱︱ ............................................................................1
Features︱︱︱︱ ............................................................................................2
System Requirements︱︱︱︱ .....................................................................2
Safety Precautions︱︱︱︱...........................................................................3
General Use................................................................................................................... 3
Backing up Data............................................................................................................ 3
Transporting.................................................................................................................. 3
Power............................................................................................................................. 3
Reminders..................................................................................................................... 4
Product Overview︱︱︱︱.............................................................................4
Connecting to a Computer︱︱︱︱ ..............................................................5
Disconnecting from a Computer︱︱︱︱ ....................................................8
Windows
...................................................................................................................... 8
Mac® OS......................................................................................................................... 9
Linux®............................................................................................................................ 9
Formatting the Hard Drive︱︱︱︱...............................................................9
Windows® XP............................................................................................................... 10
Windows
7/Vista........................................................................................................ 11
Mac® OS....................................................................................................................... 14
Linux®.......................................................................................................................... 16
Troubleshooting︱︱︱︱.............................................................................17
Specifications︱︱︱︱.................................................................................19
Transcend Limited Warranty︱︱︱︱ ........................................................20
1
Introduction︱
Congratulations on purchasing Transcend’s StoreJet 25M3. This rugged, ultra-portable, high
speed USB storage device is the perfect data management system for uploading, downloading,
storing and transferring your data. With its shock-resistant design, huge storage capacity and
real-world transfer speeds up to 3X faster than USB 2.0 (in USB 3.0 mode), the compact StoreJet
25M3 is ideal for carrying your files, folders, documents, photos, music and videos. In addition, the
StoreJet 25 comes with very useful software* that can increase your mobile productivity. This
User’s Manual is designed to help you get the most from your new device. Please read it in detail
before using the StoreJet 25.
*Note: The
Transcend Elite
software only works in Windows—please see the Software User's Manual for details
Package Contents︱
The StoreJet 25 package includes the following items:
StoreJet® 25M3
USB 3.0 Cable
USB Power Cable
2
Quick Start Guide
Warranty Card
Features︱
SuperSpeed USB 3.0 compliant and backwards compatible with USB 2.0
Durable anti-shock silicone outer shell
Advanced internal hard drive suspension system
Connection bandwidth up to 5Gbits per second
Extra-large storage capacity
Sleek ultra portable design
Easy Plug and Play operation – no drivers required
USB powered – no external adapter necessary
Power saving sleep mode
One Touch Auto-Backup button
Includes Transcend Elite backup and security software
Multicolor LED indicator (power, data transfer, & USB 2.0/3.0 connection type)
System Requirements︱
Desktop or notebook computer with a working USB port.
One of following Operating Systems:
•
Windows XP
•
Windows Vista
•
Windows 7
•
Linux Kernel 2.6.31 or later
•
Mac OS X 10.4 or later (only USB 2.0 currently supported)
3
Safety Precautions︱
These usage and safety guidelines are IMPORTANT! Please follow them carefully.
General Use
•
Carefully unpack the contents of the StoreJet 25 package.
•
During operation, avoid exposing your StoreJet 25 to extreme temperatures above 55℃,
or below 5℃.
•
Do not drop your StoreJet 25.
•
Do not allow your StoreJet 25 to come in contact with water or any other liquids.
•
Do not use a damp/wet cloth to wipe or clean the exterior case.
o Do not store your StoreJet 25 in any of the following environments: Direct
sunlight
o Next to an air conditioner, electric heater or other heat sources
o In a closed car that is in direct sunlight
o In an area with strong magnetic fields or excessive vibration
•
If your Windows computer will not boot while StoreJet 25 is connected, please
disconnect the StoreJet 25 to your computer first and connect the StoreJet 25 after
starting Windows. Otherwise, refer to your computer's manual and change the BIOS
settings to instruct the computer to boot from a different device.
Backing up Data
•
Transcend does NOT take any responsibility for data loss, or damage during
operation. If you decide to store data on your StoreJet 25 we strongly advise that you
regularly backup the data to a computer, or other storage medium.
•
To ensure Super-Speed USB 3.0 data transfer rates when using your StoreJet 25,
please make sure that your computer has the relevant drivers and hardware to support
USB 3.0. If you are unsure about how to check this, please consult the user’s manual of
your computer, motherboard, or USB 3.0 interface card for USB 3.0 driver information.
Transporting
•
Do not pack the StoreJet 25 into luggage without proper padded support. Other items in
your luggage may damage the drive during travel if it does not have proper protection.
•
Avoid squeezing or compressing the StoreJet 25.
•
Do not place objects on top of your StoreJet 25.
Power
•
The StoreJet 25 is powered directly via a computer USB port. However, the power
supplied by the USB port on some older computers is below the 5V DC required to
power the StoreJet 25. If your StoreJet does not function properly upon connecting it to
your computer, please use the included USB Power Cable.
The Power Cable can provide additional power for the
StoreJet 25 if necessary
•
Use only the USB 3.0 cable that came with the StoreJet 25 to connect it to a computer,
4
and always ensure that the cable you are using is in good condition. NEVER use a cable
that is frayed or damaged.
•
Ensure nothing is resting on the USB cable and that the cable is not located where it can
be tripped over or stepped on.
Reminders
Always follow the procedures in the “Disconnecting from a Computer” section to remove the
StoreJet from your computer.
Product Overview︱
A
Power Cable DC-IN
B
Micro USB 3.0 Port
C
One Touch Auto-Backup Button
5
Connecting to a Computer︱
The StoreJet 25M3 can be connected to your computer using either USB 2.0 or USB 3.0. To get
the best performance results from your drive, we recommend using the USB 3.0 interface
(currently not supported on Mac computers).
1.
Plug the micro USB end (1) of the USB cable into the StoreJet 25M3.
2.
Plug the rectangular end (2) of the USB cable into an available USB 2.0 or USB 3.0 port on
your desktop or notebook computer.
3.
If necessary, plug in the USB Power Cable.
Connecting the USB Power Cable
NOTE:
On some older computers, the power supplied by the USB port might not meet the 5V DC requirement.
If you have power-related problems, please be sure to use the included USB Power Cable.
(1) (2)
1. Unplug the USB 3.0 Cable from your computer.
2. Connect the round-shaped end (1) of the USB Power Cable to the DC IN jack on the
StoreJet 25
3. Plug the rectangular end (2) into any available USB port (USB 2.0 or 3.0) on your desktop
computer, notebook or netbook.
4. Reconnect the USB 3.0 Cable.
Micro USB 3.0
Connector
USB 2.0 / 3.0
Connector
USB 3.0 Cable
StoreJet 25M3 Micro USB port USB 2.0 Port USB 3.0 Port
Loading...