Trane TCONT600AF11MA, TCONT602AF22MA User Manual

TCONT600AF11MA/TCONT602AF22MA

Programmable Comfort Control

OWNER’S GUIDE

Quick Reference Card

Grasp and pull to see basic
operating instructions at a
glance.

CAUTION: EQUIPMENT DAMAGE HAZARD. To prevent possible compressor damage, do
not operate cooling system when outdoor temperature is below 50°F (10°C).

Battery Holder

Press down and pull to
remove batteries.
Batteries should be
replaced once a year
(see page 17).

Need Help?

For assistance with this product please visit www.trane.com

or call the Customer Assistance Helpline toll-free at 1-800-500-2041.

Read and save these instructions

Table of contents

About your new Comfort Control

Control features ..............................2

Programming at a glance ................3

Quick reference to controls............4

Quick reference to display..............5

Programming & Operation

Set time and day..............................6

Select fan setting (auto/on) ............7

Select system setting (heat/cool)......8

Using program schedules................9

Program schedule overrides ........12

Auto-changeover (heat/cool) ........14

Compressor protection ................15

Adaptive Intelligent Recovery

™

....16

Appendices

Battery installation ........................17

In case of difficulty ......................18

Customer assistance......................20

Accessories/replacement parts ....20

Limited warranty ..........................21

This Comfort Control is ready to go!

Your new Comfort Control is pre­programmed and ready to go. See
page 3

1

to check settings.

CAUTION: EQUIPMENT DAMAGE
HAZARD.

compressor damage, do not operate
cooling system when outdoor
temperature is below 50°F (10°C).

To prevent possible

About your new Comfort Control

Congratulations on the purchase of your new Comfort Control. It has been
designed to give you many years of reliable service and easy-to-use, push-button
climate control.

Features

• Separately programmable weekday/weekend schedules.

• One-touch temp control overrides program schedule at any time.

• Energy Star®compliant to greatly reduce your heating/cooling expenses.

• Large, clear, backlit display is easy to read — even in the dark.

• Displays both room temperature and temperature setting.

• Removable battery holder for fast, easy replacement.

• Built-in compressor protection.

2

This Comfort Control is ready to go!

Your new Comfort Control is pre-programmed and ready to go.All you have to do
is set the time and day. Then check the settings below and change if needed:

1 Set time and day (required for proper operation)................................See page 6

2 Select fan setting (Auto/On): Preset to Auto ......................To change, see page 7

3 Select system setting (Heat/Cool): Preset to Heat..............To change,see page 8

4 Program schedules: Preset to energy-saving levels

while you’re at work or asleep (assumes you
wake at 6 am, leave at 8 am,return at 6 pm

and go to bed at 10 pm) ..............................................To change, see pages 9-11

ONE-TOUCH TEMPERATURE CONTROL: You can override the program schedule at any
time, and manually adjust the temperature (see pages 12-13).

3

Quick reference to controls

Digital display (see page 5) Battery holder (see page 17)

Temperature buttons

Press to adjust temperature
settings (see page 11-13)

Hold button

Press to override programmed
temperature control (see page 13)

Function buttons

Press to select the function displayed just above each button.
(Functions change depending on the task.)

4

In Recovery

Auxillary

Heat On

Quick reference to display screen

Current inside temperature Low battery warning

In Recovery

(see page 16)

Current program period

Wake/Leave/Return/Sleep
(see pages 9-11)

Set Clock/Day/Schedule

(see pages 6 & 11)

Function buttons

Press the button beneath each function to view or change
settings (functions change depending on the task)

(see page 17)

5

Current time/day

(see page 6)

Temperature setting

(see pages 11-13)

Auxiliary heat

(Only for heat pumps with
auxiliary heat)

System status

Heat On/Cool On
(If flashing, see page 15)

System setting

Heat/Cool/Auto/Off/Em
Heat (see page 8)

Fan setting

Auto/On (see page 7)

Wed

Done

Set ScheduleSet Day

Set the time and day

Press SET CLOCK/DAY/SCHEDULE, then adjust time

Press SET DAY, then select current day

1 Press the SET CLOCK/DAY/SCHEDULE

button, then press or to set
the clock time.

2 Press the SET DAY button, then

press or to select the day
of the week.

3 Press DONE to save & exit.

Note: If the SET CLOCK/DAY/SCHEDULE option
is not displayed, press DONE or

RUN SCHEDULE.

Note: If the display flashes Set Clock,
the Comfort Control will follow your settings
for the weekday “Wake” time period until
you reset the time and day.

6