Trane VSHV, EXHV, GEC, EXW, GEHV Brochure
...
Trane® Axiom™
Water-Source Heat Pumps
A heat-pump system to meet the needs
of virtually any building.
With one of the broadest portfolios of heat-
pump systems of any manufacturer, Trane has
a water-source heat pump system to meet the
needs of virtually any building—and deliver
efficient performance.
That performance can be optimized by using
Tracer™ system and unit controls, which are
factory-programmed to maximize both comfort
and energy savings—unlike competing systems’
controllers, which rarely take full advantage of a
system’s key performance parameters.
In a Trane® water-source heat pump system, one
of the most important measures of performance
is efficient operation—which is why we’re proud
that our top-performing variable-speed water-
source heat pump units can reach up to 40 EER
and save up to 60 percent on energy costs.
Performance, efficiency and a wide variety of
configurations. It’s a combination that’s a perfect
fit for nearly any building … including yours.
Trane water-source heat pumps can meet the heating and cooling
needs of a variety of building sizes—efficiently and effectively.
Variable-Speed VSHV
High-Efficiency EXHV
½-5 Ton GEHV
Vertical Stack GET
Console GEC
Water-to-Water EXW
Midrange & Large GEHV
Rooftop GER
0 3 6 9 12 15 18 21 24 27
The Right Fit, the Right Performance
Every building should have an HVAC system that delivers maximum comfort
and efficiency without compromise. Which is why Trane maintains a lineup
of water-source heat pump systems with a wide variety of configurations
and designs to ensure compatibility and performance. Vertical, horizontal,
rooftop and console installations are supported, as well as buildings
with either three-phase or single-phase electrical service. Regardless
of the configuration, every Trane system is built to provide dependable
performance day after day, year after year.
Size Range
Trane water-source
heat pump systems
can be a perfect
fit for heating and
cooling needs of a
variety of building
types, including those
used by educational
institutions,
businesses and
government entities.
The Integrated Controls Advantage
A heat pump system can be engineered, built and
installed to deliver exceptional performance and
efficiency … but unless that system’s controls are
designed to take full advantage of its benefits,
the system may never deliver its full potential.
Only Trane water-source heat pump systems are
available with unit controllers containing Trane
programming, which optimize both performance
and efficiency under all operating conditions.
These exclusive Tracer™ controllers offer a level
of system integration that can’t be matched by
third-party controllers.
Pre-programmed operating parameters can get
the entire heat pump system up and running
quickly—and once online, a Tracer SC system
controller continuously monitors building
information and communicates with individual
unit controllers to deliver the best possible levels
of comfort, cost savings and convenience, too—
because the Tracer SC system can be managed
from either a single internal point or even via
the Web.
At a Glance: Trane Water-Source Heat
Pump System Benefits
Exceptional Efficiency – Trane water-source heat pump systems can reach up
to 40 EER on Trane eFlex™ variable-speed systems, which can help lower your
utility bills.
Available Integrated Tracer SC System Controls – Many competing heat
pump systems rely on generic controllers made by third-party suppliers. Generic
controllers lack specific algorithms tuned to the unique performance and
efficiency parameters of a heat pump system; the result is that performance
and efficiency rarely can be optimized. Only a Tracer SC system control contains
Trane-developed algorithms specifically designed to maximize the performance
and efficiency of your Trane heat pump system.
Available eFlex Variable-Speed Technology – Trane variable-speed water-
source heat pump systems can provide superior comfort while dramatically
reducing energy costs. Trane eFlex variable-speed technology allows the
compressor and fan to operate at reduced speeds to match demand, minimizing
on/off cycling, temperature swings, noise and energy use. Trane variable-speed
water-source heat pump systems are among the most efficient available, and can
save up to 60 percent in energy costs compared to older systems.
Improved Comfort – Trane water-source heat pumps are available with
technologies to maximize indoor comfort by removing airborne contaminants,
reducing humidity and minimizing system noise.
Large System Portfolio – With the wide Trane portfolio of different water-
source heat pump system designs, there’s sure to be a system that will fit your
building and provide the performance and efficiency you expect and deserve.
Multi-Room Heating and Cooling – Trane water-source heat pump systems are
the perfect choice for locations that require unique heating and cooling needs
for different rooms, because they can simultaneously heat and cool multiple
rooms in the same building. A heat-recovery process can transfer excess heat
from where it’s not needed to where it is, increasing overall system efficiency.
Loading...