![](/html/13/1375/13752cedd4d173862992523534beefd416f23c0d5f3ae7e8f371b119f6cfc3d2/bg1.png)
Features
Single-in-Line Package (SIP)
Fully SMD-design
Isolated Single and Dual Output
I/O-Isolation 1‘000 VDC
High Efficiency up to 83 %
Pin-compatible with other Manufacturers
100% Burn-in (8 h)
2 Year Product Warranty
DC/DC Conver ter
TMH Series 2 Watt
The TMV series are ultra miniature, isolated 2 W DC/DC-converters
in a Single-in-Line package (SIP). Requiring only 1.5 cm2 board
space they offer the ideal solution in many space critical applications
for board level power distribution. The use of SMD-technology makes
it possible to offer a product with high performance at low cost.
Models
Ordercode Input voltage Output voltage Output current max. Efficiency typ.
TMH 0505S 5 VDC 400 mA 76 %
TMH 0512S 12 VDC 165 mA 80 %
TMH 0515S
TMH 0505D ± 5 VDC ±200 mA 77 %
TMH 0512D ±12 VDC ± 80 mA 79 %
TMH 0515D ±15 VDC ± 65 mA 79 %
TMH 1205S 5 VDC 400 mA 78 %
TMH 1212S 12 VDC 165 mA 82 %
TMH 1215S
TMH 1205D ± 5 VDC ±200 mA 79 %
TMH 1212D ±12 VDC ± 80 mA 82 %
TMH 1215D ±15 VDC ± 65 mA 82 %
TMH 2405S 5 VDC 400 mA 77 %
TMH 2412S 12 VDC 165 mA 81 %
TMH 2415S
TMH 2405D ± 5 VDC ±200 mA 79 %
TMH 2412D ±12 VDC ± 80 mA 81 %
TMH 2415D ±15 VDC ± 65 mA 82 %
5 VDC ±10%
12 VDC ±10%
24 VDC ±10%
15 VDC 130mA 80 %
15 VDC 130mA 83 %
15 VDC 130mA 82 %
www.tracopower.com Page 1
![](/html/13/1375/13752cedd4d173862992523534beefd416f23c0d5f3ae7e8f371b119f6cfc3d2/bg2.png)
DC/DC Conver ter
TMH Series 2 Watt
Input Specifications
Input current no load /full load 5 Vin models 50 mA / 510 mA typ.
12 Vin models 20 mA / 200 mA typ.
24 Vin models 10 mA / 100 mA typ.
Surge voltage (1 sec. max.) 5 Vin models 9 V max.
12 Vin models 18 V max.
24 Vin models 30 V max.
Reverse voltage protection 0.3 A max.
Reflected input ripple current can be reduced by ext. 1–3.3 µF polyester film
capacitor
Input filter internal capacitors
Output Specifications
V oltage set accuracy ± 3 %
V oltage balance (dual output models) ± 1 % max.
Regulation – Input variation ± 1.2 % / 1 % change Vin
– Load variation 20 – 100 % ± 10 % max.
Ripple and noise (20 MHz Bandwidth) 5 Vin models 75 mV pk-pk max.
12 /24 Vin models 150 mV pk-pk max
Temperature coefficient ± 0.02 % / °C
Short circuit protection limited 1 sec. max.
Capacitive load – Single output models 470 µF max.
– Dual output models 390 µF max.
General Specifications
T emperature ranges – Operating –40 °C ... +75 °C
– Case temperature +95 °C max.
– Storage –40 °C ... +105 °C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217E) >2’000’000 h @ 25 °C
Isolation voltage Input/Output 1‘000 VDC
Isolation capacity Input/Output 80 pF typ.
Isolation resistance Input/Output >1‘000 Mohm
Switching frequency 80 kHz typ. (Frequency modulation)
Frequency change over line and load ± 30 % max.
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com Page 2