TRACO TIS600-172, TIS600-148SIG, TIS600-148, TIS600-148RED, TIS600-128 Datasheet
...
http://www.tracopower.com Page 1
Industrial Power Supplies
TIS Series 75 - 600 Watt
Features
Switch mode power supplies for
DIN-rail mounting
4 power ranges with 3, 6, 12 and 24 A
output current (24 VDC models)
Selectable 115/ 230 VAC input
Very low ripple and noise
EMI complies with EN50081-2 and
EN50082-2
Conducted EMI to EN55011 class B
For system operation available with
built-in functions:
RED: Redundancy module for N+1
systems with true current sharing.
SIG: Signal module with AC-Power-
fail, DC- OK Signal and
external ON/OFF control
UDS: DC-UPS module for uninter-
ruptable battery backed-up
power systems.
Worldwide Safety Approvals
Easy snap-on mounting on DIN-rails
or chassis mounting
2 Year Product Warranty
The switching power supplies of the TIS series have been particular y designed for applications in industrial process control systems and machine
tools. Excellent specifications and high immunity against electrical disturbances guarantee reliable power for sensitive loads in rugged industrial
environments. With help of optional function modules specific requirements
for system applications can be met by a standard product. With the UDS
module the power supplies can be extended to a perfect DC-UPS with automatic battery- backup. This function is ver y often required in applications
where a time delayed shutdown of a system is necessary. To monitor and
control the power supply a signal module can be installed. For parallel
operation with active power sharing a redundancy option is available. This
flexibility makes the TIS series power supplies a cost effective solution for
many industrial applications.
Models
Ordercode Input Voltage Output Power Output Voltage Output Current
(includes terminal plugs) max. nom. max.
TIS 75-112
115 / 230 VAC
12 VDC 6.0 A
TIS 75-124
selectable
75 W 24 VDC 3.0 A
TIS 75-148 48 VDC 1.5 A
TIS 150-124 115 / 230 VAC
150 W
24 VDC 6.0 A
TIS 150-148 selectable 48 VDC 3.0 A
TIS 300-124
115 / 230 VAC
24 VDC 12 A
TIS 300-148
selectable
300 W 48 VDC 6.0 A
TIS 300-172 72 VDC 4.2 A
TIS 500-124 230 V AC 500 W 24 VDC 20 A
TIS 600-124 24 VDC 24 A
TIS 600-128 115 / 230 VAC
600 W
28 VDC 22 A
TIS 600-148 selectable 48 VDC 12 A
TIS 600-172 72 VDC 8.5 A
TIS 300-124 DCI 300 - 800 VDC 300 W 24 VDC 12 A
http://www.tracopower.com Page 2
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Industrial Power Supplies
TIS Series 75-600 Watt
Input Specifications
Input voltage range – TIS 75, TIS 150, TIS 300, TIS 600 93 – 132 VAC / 187 – 264 VAC
– TIS 500 187 – 264 VAC
– TIS 300 DCI 300 – 800 VDC
Input frequency 47 – 63 Hz
Input current at full load (typ.) 115 VAC 230 VAC
– TIS 75 1.7 A 0.9 A
– TIS 150 3.0 A 1.7 A
– TIS 300 5.4 A 3.3 A
– TIS 500 5.5 A
– TIS 600 10.5 A 6.4 A
Inrush current (< 2 ms) 115 VAC 230 VAC
– TIS 75 < 16.5 A < 33 A
– TIS 150 < 35 A < 70 A
– TIS 300 < 35 A < 70 A
– TIS 500 < 70 A
– TIS 600 < 70 A < 80 A
Output Specifications
Output voltage adj. range – 12 VDC models 12 – 14 VDC
– 24 VDC models 24 – 28 VDC
– 28 VDC models 28 – 32 VDC
– 48 VDC models 48 – 52 VDC (48 – 55 VDC on request))
– 72 VDC models 60 – 76 VDC
Regulation – Input variation ± 0.2 % max.
– Load variation (10–90%) – TIS 75, TIS 150 ± 1.0 % max.
– TIS 300, TIS 500, TIS 600 ± 0.3 % max.
(± 1.5 % in parallel operation)
Ripple and Noise (20MHz Bandwidth) < 50 mV pk-pk
Electronic shor t circuit protection current limitation at 110 % typ.
(constant current, automatic restart)
Overvoltage protection, triggerpoint at 140 % typ. Vout nom.
Hold-up time 115 VAC 230 VAC
– TIS 75 ... TIS 300 min. 25 ms min. 30 ms
– TIS 500 min. 40 ms
– TIS 600 min. 15 ms min. 25 ms
http://www.tracopower.com Page 3
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
General Specifications
Temperature ranges – Operating (ambient temp.) – 25 °C…+70 °C max.
– Derating above 50 °C 2% /°C
– Storage (non operating) – 25 °C…+ 85 °C
Humidity (non condensing) 95 % rel H max.
Temperature coefficient 0.02 % / °C
Switching frequency 80 kHz typ. (Pulswidth modulation)
Efficiency – TIS 75 ... TIS 300 85 % typ.
– TIS 500 90 % typ.
– TIS 600 88 % typ.
Isolation according to EN 60950, UL 1950, UL 508C
Reliability, calculated MTBF (MIL-HDBK-217 E) – TIS 75 /150 450000 h @ +25°C/ 420000 h @ +25°C
– TIS 300 /500 360000 h @ +25°C/ 340000 h @ +25°C
– TIS 600 300000 h @ +25°C
Safety standards IEC 60950, EN 60950 (SELV),
UL/cUL 1950, UL 508C
Safety approvals UL/cUL 1950 recognized, File E18138
UL/cUL 508C listed, File E210002
UL/cuL 1604 listed, File E213613
(Class I,Division
2, Groups A, B, C and D hazardous locations)
CB-Scheme
Electromagnetic compatibility (EMC), Emissions EN 50081-1 / EN 50081-2
– Conducted RI suppression on input EN 55011 class B, EN 55022 class B,
FCC part 15, level B
– Radiated RI suppression EN 55011 class A, EN 55022 class A,
FCC part 15, level A
Electromagnetic compatibility (EMC), Immunity EN 50082-2
– Electrostatic discharge (ESD) IEC / EN 61000-4-2 4 kV / 8 kV
– Radiated RF field immunity IEC / EN 61000-4-3 10 V / m
– Electrical fast transient / burst immunity IEC / EN 61000-4-4 2 kV
– Surge immunity IEC / EN 61000-4-5 2 kV / 4 kV
– Immunity to conducted RF disturbances IEC / EN 61000-4-6 10 V
– Power frequency field immunity IEC / EN 61000-4-8 30 A / m
Safety class Degree of Protection 1 (IEC 536)
Case protection IP 20 (IEC 529)
Environment – Vibration IEC 60068-2-6,1 gn, 200 sweeps, each axis
– Shock IEC 60068-2-27, 15 gn, 11 ms, each axis
Enclosure material Aluminium (chassis) / stainless steel (cover)
Mounting (snap-on with selflocking spring) for 35 mm DIN-rails as per EN 50022
Connection Plugable screw terminals (plugs included)
(TIS 600: screw terminal blocks)
Industrial Power Supplies
TIS Series 75-600 Watt
http://www.tracopower.com Page 4
Specifications can be changed without notice
Optional Mounting Systems Dimensions mm (inches)Power Supplies with Redundancy Function
With this option a parallel operation of up to 5 units is possible. Decoupling diodes and current share lines allow to build
true N +1 redundant systems with active current sharing for all units. This function also includes an alarm relay to signal
a single unit failure.
This option is available for TIS 150 W, TIS 300 W and TIS 600 W models. Please note: A combination with other
options is not possible.
Models
Ordercode Input Voltage Output Power Output Voltage Output Current
(includes terminal plugs) max. nom. max.
TIS 150-124 RED 115 / 230 VAC
150 W
24 VDC 6.0 A
TIS 150-148 RED selectable 18 VDC 12 A
TIS 300-124 RED 115 / 230 VAC
300 W
24 VDC 12 A
TIS 300-148 RED selectable 48 VDC 6.0 A
TIS 600-124 RED 115 / 230 VAC
600 W
24 VDC 24 A
TIS 600-148 RED selectable 48 VDC 12 A
Industrial Power Supplies
TIS Series 75-600 Watt
Specifications
Raiting per relay contact 60 VDC /0.36 A max.
I-Sense
Regulator
L
Con1
Pin3
N
115/230VAC
Con1
Pin1
AC
Con1
Pin2
DC
Common
Unit
OK
Unit OK
Con3 - Pin1
Bus
Indicator
Con2 - Pin1/2
Con2 - Pin3/4
V-Sense
+Vout
Current
Shareline
Unit OK
Con3 - Pin4
Con3 - Pin3
Con3 - Pin2
-Vout
24/48VDC
Loading...