USING ALARM AND SN OOZE FUNCTION
1. Slide ALARM ON/OFF switch to ON position to
turn
on the alarm, with the alarm icon “ ” displayed on
the LCD.
2. Slide ALARM ON/OFF switch to OFF position to turn
off the alarm.
3. When it is sounding,press SNOOZE /LIGHT to stop
the current alarm and enter the snooze mode,with
the alar m i con flashi ng. Or the sound wil l s top
Alarm t ime set ting m ode
Hour set t ing Minute set t ing
USING ALARM AND SNOOZE FUNCTION
1. Slide ALARM ON/OFF switch to ON position to
turn
on the alarm, with the alarm icon “ ” displayed on
the LCD.
2. Slide ALARM ON/OFF switch to OFF position to turn
off the alarm.
3. When it is sounding,press SNOOZE/LIGHT to stop
the current alarm and enter the snooze mode,with
the alarm icon flas hing. Or the soun d will stop
automatically one minute later.
We a k sign al q ua li ty
Alarm t ime sett ing mode
Hour set ting Minut e set ting
turn
PRODUCT DESCRIPTION
1. LCD display
2. CLOCK key
3. ALARM key
4. ALARM ON/OFF
switch
5. DOWN key
6. UP key
7. SNOOZE/LIGHT key
8. RESET key
9. RCC key
10. NIGHT LIGHT
FUNCTION ON/OFF
switch
11. Battery compartment
LCD
1. Time
2. AM/PM
3. Month
4. Date
5. Day of the week
6. Temperature
7. Signal strength
indication
8. Daylight saving time
9. Time zone map
ALARM TIME MODE
1. Alarm time
2. AM/PM
3. Alarm icon
CLOCK BUTTON
1. In normal time mode, press and hold CLOCK for 2
seconds to enter normal time setting.
2. In setting mode, press CLOCK to set time. Use UP or
DOWN keys to increase or decrease values.
3. After setting, press CLOCK for 2 seconds to save
time setting.
ALARM BUTTON
1. In normal time mode, press ALARM to display alarm
time.
2. Press and hold ALARM for 2 seconds to enter alarm
time setting. Use UP or DOWN keys to increase or
decrease values.
3. After setting, press ALARM again to save setting
values.
ALARM ON / OFF SWITCH
1. Slide ALARM ON/OFF switch to turn on/off the alarm.
DOWN KEY
In setting mode, press to decrease setting value.
Press and hold it to speed up the setting.
UP KEY
In setting mode, press to increase setting value.
Press and hold it to speed up the setting.
SNOOZE/LIGHT
• Press SNOOZE/LIGHT key once to turn on back-light
for 5 seconds.
• When unit is alarming, press it to snooze alarm.
NIGHT LIGHT FUNCTION ON/OFF SWITCH
Slide it to ON position to turn on the night light, that the
back-light will turn on automatically when the light-sensor
can not sense light in dark environment.
Slide it to OFF position to turn off the night light function.
RCC KEY
Press it to switch between Celsius and Fahrenheit.
Press and hold it for 3 seconds to receive the RC signal
for reception testing.
RESET KEY
Press it to set all values to default values. In case of
malfunction, the unit may be required to reset.
DAYLIGHT SAVING TIME (DST)
The clock has been programmed to automatically switch
when the daylight saving time is in effect. Your clock will
show “DST” during the summer.
SIGNAL STRENGTH INDICATOR
The signal indicator displays signal strength in 4 levels.
Wave segment ashing means time signals are being
received. The signal quality could be classied into 4
types:
No si gn a l qua lit y
Ac ce pta bl e si gn a l qua lit y E xc ellen t si gn al qua li ty
If the radio-controlled clock receives signal successfully,
a sync-time symbol “
” will appear on LCD. Otherwise,
signal strength symbol will disappear from the LCD
display.
NOTE:
Use the “RCC” button to receive time signal
manually. Unit will exit receive mode automatically after
6-12 minutes. Receive mode consumes more battery
power that may reduce battery lifetime.
TIME AND CALENDAR SETTING
If clock does not receive time signal successfully, you
can set the time manually. As soon as signal is received,
clock will automatically synchronize with received time.
1. In normal time mode, press and hold CLOCK key for
2 seconds until the Time zone ashes
2. Press UP or DOWN key to set desired value of the
ashing digit, press and hold UP or DOWN key to
speed up the setting.
3. Press CLOCK key again until the next digit ashes.
press UP or DOWN key to change its value.
4. Repeat above operations to set the time and calendar
in this order:
Time zone > Year > Month > Date > 12/24-hr > Hour >
Minute > Second > Language(WWVB version)
5. Press CLOCK key to save and exit the setting, or let
it exit automatically 30 seconds later without pressing
any key.
ALARM TIME SETTING
1. In normal mode, press and hold ALARM key for 2
seconds until Hour digit ashes.
2. Press UP or DOWN key to set the desired value,
press and hold UP or DOWN key to speed up the
setting.
3. Press ALARM key again until Minute digit ashes and
press UP or DOWN key to change its value.
4. Press ALARM key again to save and exit the setting,
or let it exit automatically 30 seconds later without
pressing any key. Minute digit ashes and press UP
or DOWN key to change its value.
USING ALARM AND SNOOZE FUNCTION
1. Slide ALARM ON/OFF switch to ON position to turn
on the alarm, with the alarm icon “
” displayed on
the LCD.
2. Slide ALARM ON/OFF switch to OFF position to turn
off the alarm.
3. When it is sounding,press SNOOZE/LIGHT to stop
the current alarm and enter the snooze mode,with the
alarm icon ashing. Or the sound will stop automatically one minute later.
4. Once the snooze function is activated, the 4 step crescendo alarm will sound 5 times in 5-minute interval.
The alarm duration is 60 seconds.
ALL OPERATIONAL DIFFICULTIES
If this clock does not function properly for any reason,
replace the battery with a new high quality battery (see
the “Battery Replacement” section). Low battery power
can occasionally cause any number of “apparent”
operational difculties. Replacing the battery with a new
fresh battery will solve most difculties.
BATTERY REPLACEMENT
Erratic readings, a faint display, no display, or a battery
symbol appearing on the display are all indications that the
batteries must be replaced. Remove the battery cover located on the back of the unit. Remove the exhausted batteries
and replace them with two (2) new AA alkaline batteries.
Insert the new batteries with the proper polarity as indicated
by the illustration in the battery compartment. Replace the
battery cover.
Replacing the batteries will reset all settings to default
values.
Warning: Changes or modications to this unit not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular in-
stallation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
WARRANTY, SERVICE, OR
RECALIBRATION
For warranty, service, or recalibration, contact:
TRACEABLE® PRODUCTS
12554 Galveston Rd. Suite B230
Webster, Texas 77598 USA
Ph. 281 482-1714 • Fax 281 482-9448
E-mail support@traceable.com
www.traceable.com
Traceable® Products are ISO 9001:2018 Quality-
Certied by DNV and ISO/IEC 17025:2017
accredited as a Calibration Laboratory by A2LA.
Cat. No. 1066
Traceable® is a registered trademark of Cole-Parmer.
©2020 Traceable® Products. 92-1066-00 Rev. 0 052820
TRACEABLE
RADIO-CONTROLLED
ATOMIC CLOCK
WITH TEMPERATURE
INSTRUCTIONS
®
Loading...