
User Guide
USB to Ethernet Network Adapter
Using the Adapter
This a dapte r suppo rts Pl ug and Play fe ature . Plug in an d wait f or second s.
The n this adapt er is rea dy to us e.
UE300C:
*
For Windows 7/8/8.1, Mac OS X 10.8 and older version, please download and install a
UE3 30, UE 300 an d UE20 0:
*
For Windows 7/8/8.1, please click to install a driver if prompted to do so. For Windows 7,
please click CANCEL if prompted "The program might not have installed correctly" after
installation.
For Mac OS X 10.8 and older version, please download and install a driver from our
UE306:
*
For Windows 7/8 and Mac OS, please download
www.tp-link.com, and search the model number.
www.tp-link.com, and search the model number.
www.tp-link.com, and search the model number.
wired network
Works with Nintendo Switch (Supported by UE306 ONLY)
*
RJ45 Port
*use UE330 as illustration
USB 3.0
wired network
RJ45 Port
UE306
LED Explanation
White
Yellow The Ethernet cable is properly connected
Green
LED (for UE300C, UE300, UE200, UE306)
White
White
Status IndicationLED (for UE330)
On The adapter is properly connected and hub is ready to use
On
Flashing
Network data is being transferred
On
Both the adapter and Ethernet cable are properly connected
Flashing
Network data is being transferred
USB Port
computer
Nintendo Switch

ATTENTION
to disconnect the product or the power adapter from the p ower source.
♦ Don’t disassemble the product, or make repairs yourself. Yo u run the risk of electric
shock and voiding the limited warranty. If you need servic e, please contact us.
Recycling
This product bears the selective sorting symbol for Waste electrical and electronic
equipment (WEEE).
This means that this product must be handled pursuant to European directive 2012/19/EU
in order to be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer
when he buys a new electrical or electronic equipment.
To communicate with TP-Link users or engineers, please visit
https://community.tp-link.com to join TP-Link Community.
For technical support, replacement services, the user guide and more
information, please visit https://www.tp-link.com/support, or simply scan
the QR code.
If you have any suggestions or needs for our product guides, you
are welcome to email techwriter@tp-link.com.cn.
FCC STATEMENT
This device complies with part 15
of the FCC Rules. Operation is
subject to the following two conditions:
1) This device may not cause harmful
interference.
2)
This device must accept any interference
received, including cause undesired
operation.
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment.
CE Mark Warning
This is a class B product. In a
domestic environment, this
product may cause radio interference, in
which case the user may be required to
take adequate measures.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
TP-Link hereby declares that the device is in
compliance with the essential requirements
and other relevant provisions of directives
2014/30/EU, 2014/35/EU, 2009/125/EC,
2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may
be found at
https://www.tp-link.com/en/support/ce/
UKCA Mark
TP-Link hereby declares that the device is in
compliance with the essential requirements and
other relevant provisions of the Electromagnetic
Compatibility Regulations 2016 and Electrical
Equipment (Safety) Regulations 2016.
The original UK declaration of conformity may be
found at https://www.tp-link.com/support/ukca
BSMI Notice
安全諮詢及注意事項
♦ 請使用原裝電源供應器或只能按照本產品注明的
電源類型使用本產品。
♦
清潔本產品之前請先拔掉電源線。請勿使用液體、
噴霧清潔劑或濕布進行清潔。
♦
注意防潮,請勿將水或其他液體潑灑到本產品上。
♦ 插槽與開口供通風使用,以確保本產品的操作可
靠並防止過熱,請勿堵塞或覆蓋開口。
♦ 請勿將本產品置放於靠近熱源的地方。除非有正
常的通風,否則不可放在密閉位置中。
請不要私自打開機殼,不要嘗試自行維修本產品,
♦
請由授權的專業人士進行此項工作。
限用物質含有情況標示聲明書
產品元
件名稱
PCB
外殼
備考1. "超出0.1 wt %" 及 "超出0.01 wt %" 系指限用物
質之百分比含量超出百分比含量基準值。
備考2. "○"系指該項限用物質之百分比含量未超出百分
比含量基準值。
備考3. " — " 系指該項限用物質為排除項目。
限用物質及其化學符號
鉛Pb鎘
汞 Hg六價鉻
多溴聯苯
+6
Cd
○ ○ ○ ○
○ ○ ○ ○ ○
Cr
○
PBB
多溴二苯醚
PBDE
○
○