TP-Link TG-3468 Installation Guide
1
Hardware Connection
Quick Installation Guide
Gigabit PCI Express Network Adapter
a. Turn o your computer, unplug the power
cable and remove the case panel.
Note: In Windows XP and Windows Vista, you may see the Found New Hardware Wizard window when the adapter is plugged. Please click Cancel.Images are for demonstration only.
b. Locate an available PCI-E slot and carefully
insert the adapter.
Note:
If the bracket is not suitable for your computer, detach it from
the adapter's board and replace it with the low-prole bracket.
c. Replace the case panel, plug in the power cable
and turn on your computer.
2
Software Installation
For Windows XP
Insert the CD into the CD-ROM drive.
1
Then right-click My Computer and
click Manage.
Click Have Disk...
7
Open Device Manager. Go to Other
2
Devices, right-click Ethernet Controller,
and then click Update Driver...
Click Browse...
8
Select No, not this time, and then click
3
Next.
Go to My computer > CDXXX(H:) >
9
TG-3468 > Drivers > Windows XP,
choose the .inf le, and then click Open.
Select Install from a list or specic
4
location[Advanced], and click Next.
Click OK.
10
11
Select Don’t Search. I will choose the
5
driver to install, and click Next.
Click Next.
If prompted to ‘The
software has not
passed Windows
Logo testing to
verify its
compatibility with
Windows XP’, click
Continue Anyway
to continue.
Choose Network adapters from the
6
drop-down list , and then click Next.
Click Finish to complete the installation.
12
For Other Windows Systems
FAQ
Insert the CD into the CD-ROM drive.
1
4
Select Browse my computer for driver
software.
Right-click Computer, and then click Manage.
2
5
Select Let me pick from a list of device
drivers on my computer.
Open Device Manager. Go to Other Devices and
3
right-click Ethernet Controller; then click Update
Driver Software...
6
For Windows 7/Vista:
Choose Show All Devices, and then click Next.
OR
Open Device Manager. Go to Network Adapters,
right-click Realtek PCIe GBE Family Controller,
and click Update Driver Software...
7
Click Have Disk...
Q1: How to nd the driver if the CD is lost or
broken?
A.
You c
ould nd and download the driver at
http://www.tp-link.com/download-center
Q2: What should I do if PC cannot nd the
new hardware?
A1. Check if the network adapter is inserted in the PCI
Express slot properly.
A2. Reinsert the adapter or try to change another PCI
Express slot.
A3. If the problem persists, contact our Technical
Support.
Q3: How to nd the hardware version of the
adapter?
A1. The hardware version (Ver:X.Y) is printed on the
product label on the package or the adapter. The
number X is the hardware version of the adapter.
Model:
S/N:
Ver:X.Y
Click Browse...
8
Wait a few seconds.
12
Go to Computer > CDXXX(H:) > TG-3468 >
9
Drivers > Windows X (32bit or 64bit), choose
the .inf le, and then click Open.
For Windows Vista:
If prompted to
‘Windows can’t
verify the publisher
of this driver
software’, click
Install this driver
software anyway to
continue.
Click Close to nish the installation.
13
10
Click OK.
Select Gigabit PCI Express Network Adapter (for
11
Windows Vista/8) or TP-Link Gigabit PCI Express
Adapter (for other systems), and click Next.
A2. For more detailed instructions, please visit
http://www.tp-link.com/faq-46.html
Support
For technical support, the user guide
and other information, please visit
http://www.tp-link.com/support, or
simply scan the QR code.
7106507977 REV3.1.0©2018 TP-Link
Loading...