New Password:
Conrm Password:
UP
UP
UP
1
Connect the Hardware
2
Set Up the Network
3
Mount the Router
Unplug the power to turn o your modem, if any, and remove
the backup battery if it has one.
Unplug the power
Modem
If your internet comes from an Ethernet outlet instead of a DSL / Cable / Satellite modem, connect the
router’s 2.5 Gbps WAN/LAN port to it, then follow steps 3 and 4 to complete the hardware connection.
*Image may dier from actual product.
Connect the powered-off
1
modem to the router’s 2.5
Gbps WAN/LAN port with an
Ethernet cable.
Note: If you want to use the 1 Gbps WAN/LAN
port as the WAN port instead, please refer to
Q1 of Need Help? in this guide.
Internet
Power on the modem, and then wait
2
about 2 minutes for it to restart.
Connect the power adapter to
3
the router, press the On/Off
button to turn on the router.
Verify that the hardware connection is correct by checking the following LEDs.
4
Power
Note: If the 2.4GHz LED and 5GHz LED are off, press and hold the LED/Wi-Fi button on the back for more than
2.4GHzOn5GHz
On
2 seconds. Both the LEDs should turn solid on.
Internet
On
On
Method ONE: Via TP-Link Tether App
1. Download the Tether app.
or
Scan for Tether Tether
2. Open the Tether app and log in with your
TP-Link ID.
Note: If you don’t have an account, create one first.
3. Tap the button in the Tether app and
select Wireless Router > Standard
Routers. Follow the steps to complete
the setup and connect to the internet.
Choose Your Device Type
Wireless Router
Gaming Router
Range Extender
To enjoy a more complete service from TP-Link,
bind your TP-Link ID to the router.
Method TWO: Via a Web Browser
1. Connect your device to the router wirelessly
or with an Ethernet cable.
The default wireless network names (SSIDs) and password
are printed on the label at the bottom of the router.
Model: Archer AX3000
AX3000 Gigabit Wi-Fi Router
Wireless Password/PIN:XXXXXXXX
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
2. Launch a web browser, and enter
http://tplinkwifi.net or http://192.168.0.1 in
the address bar. Create a password to log in.
Note: If the login window does not appear, please refer to Q1 of
Need Help? in this guide.
http://tplinkwi.net
Let’s Get Started
3. Follow the step-by-step instructions to
set up the internet connection and
register for the TP-Link Cloud service.
Option ONE: Desktop Mounting
1. Attach the router on the bracket as
shown below, and slide to lock into
the bracket.
2. Place the router vertically on a flat
surface (such as a desktop or shelf)
that is out of children’s reach.
Option TWO: Wall Mounting
1. Mount the bracket on the wall in the correct
direction with two screws (not provided).
Note: The length of the screw needs to be at least 20 mm to
withstand the weight of the product.
Screw Specifications:
4.67mm<D<8mm
d<4mm
H<3mm
2. Attach the router on the bracket as shown
below, and slide to lock into the bracket.
TP-Link HomeShield
TP-Link HomeShield premium security services keep your home network safe with cutting-edge features for
network. Download the Tether app to enjoy HomeShield features.
Network Protection
Detect cyber threats to keep
your privacy and connected
devices well protected.
Quality of Service (QoS)
Prioritize your bandwidth
needs to get a better
networking experience.
For more details, visit https://www.tp-link.com/homeshield/.
Parental Controls
Manage online time and block
inappropriate content to keep
families healthy online.
Comprehensive Reports
Gain full statistics and insights
to help you know your home
network better.
USB Applications
With the USB port, it’s easy to share les and media with multiple devices. Visit https://www.tp-link.com/app/usb to
learn more about the USB applications.
•
Local Storage Sharing: Share les from the USB drive with devices on your home network
•
Media Server: Play media from the USB drive on your computer and smart devices
•
Remote Access: Access the USB drive when you are away from home
Button Explanation
• LED/Wi-Fi Button
LED: Press the button for 1 second to turn on/o the LEDs.
Wi-Fi: Press and hold the button for more than 2 seconds, then release the button to turn on or o the wireless
function of your router.
• Reset Button
Press and hold the button for about 6 seconds until the Power LED blinks to reset the router to its factory default
settings.
• WPS Button
Press the button for 1 second, and immediately press the WPS button on your client to start the WPS process.
Need Help?
Q1. What should I do if I want to use 1 Gbps WAN/LAN port for internet service?
•
Connect to the 1 Gbps WAN/LAN port with an Ethernet cable. During the quick network setup, select the 1
Gbps WAN/LAN port as the Internet port. Or after the network setup, you can go to
> Internet Port
Q2. What should I do if I can’t access the web management page?
•
Reboot your router and try again.
•
If the computer is set to a static IP, change its settings to obtain an IP address automatically.
•
Verify that http://tplinkwifi.net is correctly entered in the web browser. Alternatively, enter http://192.168.0.1 or
http://192.168.1.1 in the web browser.
•
Use another web browser and try again.
•
Disable and enable the network adapter in use.
Q3. What should I do if I can’t access the internet?
•
Power off your modem for about 5 minutes, then power it on and check the internet. If your modem has more
than one Ethernet port, keep other ports unconnected.
•
Check if the internet is working normally by connecting a computer directly to the modem via an Ethernet cable.
If it is not, contact your internet service provider.
• Log in to the web management page, and go to the Network Map page to check whether the internet IP address is
valid or not. If it’s valid, go to Advanced > Network > Internet, click Advanced Settings, select Use the Following
DNS Addresses, set the primary DNS to 8.8.8.8, and set the secondary DNS to 8.8.4.4. If it is not, check the
hardware connection or contact your internet service provider.
For cable modem users, log in to the web management page of the router and go to Advanced > Network >
•
Internet > MAC Clone. Select Clone Current Device MAC and click SAV E . Then reboot both the modem and
the router.
Q4. What should I do if I forget my wireless password?
• If you have not changed the default wireless password, it can be found on the label at the bottom of the router.
• Connect a computer directly to the router using an Ethernet cable. Log in to the router’s web management page at
http://tplinkwi.net, and go to the Wireless page to retrieve or reset your wireless password
· Keep the device away from water, re, humidity or hot environments.
· Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
· Do not use any other chargers than those recommended.
· Do not use damaged charger or USB cable to charge the device.
· Do not use the device where wireless devices are not allowed.
· Adapter shall be installed near the equipment and shall be easily accessible.
For technical support, replacement services, user guides, and other information, please visit
https://www.tp-link.com/support.
©2022 TP-Link 7106509805 REV1.0.0
(Tether app)
or Internet > Internet Port
(web management page) to change it.
Tools > Internet Connection
.
Quick Installation Guide
AX6000 8-Stream Wi-Fi 6 Router
Loading...