Toyotomi LC-S27 Owner's Manual

SPECIFICATIONS

MODEL

HEAT RATING

FUEL TANK CAPACITY

BURNING TIME

DIMENSIONS(W x D x H

)

WEIGHT

VOLTAGE / FREQUENCY

ELECTRICAL CONSUMPTION

LC-S27

9,900 BTU / 2.9 kW

2,900 BTU / 0.8 kW

4.0 lit.

14.2~ 48.0 hrs.

334 x 300 x 420 mm

8.0 kg

230V AC, 50 HZ

Igniter : 320 W

Continuous : 14 W

High

Low

Front panel

Removable fuel tank

Louver

Drip tray

Operation panel

Timer lamp

Power lamp

Room
thermistor

Power supply
cord

Air filter

Fuel gauge Tank lid

* Matching Room Size to HEAT RATING

•

Because the “Heat Load” of an area to be
heated is influenced by so many factors, it is
impossible to specify a heater output to an
exact room size.

•

If you use a heater too large for the area to
be heated, the temperature you desire will
be reached quickly. In such cases, to avoid
overheating the area, the heater must be
turned off frequently, or doors opened to
other areas of the house, or windows to the
outside opened to cool the area.

•

If you use a heater too small for the area to
be heated, it will take much longer to reach
the desired temperature, in fact it may not
be reached at all depending on the outside
weather conditions.

PART NAME

BEFORE USING HEATER, FAMILIARIZE YOURSELF WITH THE FOLLOWING OPERATING
CONTROLS AND PART NAMES.

MAIN BODY

1

Adjustment KeysKey-lock Button ON/OFF Button

Key-lock indicator Vent. indicator

Fuel indicator Colon

Timer lamp

timer power

Operation lamp

˚C indicator

Timer Key

OPERATION PANEL

INDICATOR LAMP



Operation Lamp —flashing : Preheating mode

constant : Heater in operation



˚C indicator —constant : The Digital Indicator shows Set temperature

and Room temperature.



Colon —constant : The Digital Indicator shows current time.



Fuel indicator —constant : Fuel tank empty. Only 10 minutes burning time

remaining. Digital Indicator shows the
remaining burning time in minutes.

flashing : Heater extinguished due to lack of fuel. (10

You can hear the alarm every 2 minutes.

seconds alarm)



Ventilation indicator —flashing : Oxygen level in room is insufficient. Heater



key-lock indicator —constant : Childproof Lock is on.



Timer Lamp —constant : Heater in operation in timer mode.

shuts off automatically with alarm sound.

2

UNPACKING AND PLACEMENT

CAUTION :Risk of burns. Do not operate the heater without the grille completely attached.

1. Take out heater from box carefully to avoid damage.

2. Remove all packing materials from heater.

3. Make sure all screws are tight and all parts intact.

NOTE:Save shipping carton and all packing materials for future storage of your

heater.

4. When positioning your heater for use, keep it away from walls and all other
materials as illustrated below.

More than 1m

More than
20cm

More than
50cm

More than 1.5m

More than
50cm

5. The floor should be firm and completely level. Reposition the heater, when it is not
level.

NOTE:If your heater is not on a level surface, change its location. Do not attempt to

prop heater up with books or other objects.

3

FUELING

WARNING :

Use only water-clear kerosene (paraffin).
Never use gasoline or other flammable
liquids.
ALWAYS extinguish heater before refill
heater fuel tank.
Fuel heater outside the living area.

empty full

1. Open the fuel tank lid on the top of heater cabinet and lift out

the removable fuel tank. Turn the removable tank upside
down and remove the fuel tank cap.

2. Insert the straight tube of the manual siphon into the

jerrycans; insert the siphon’s flexible hose into the removable
fuel tank opening.

3. Turn the air vent knob on the top of the siphon clockwise to

close the vent. Start the flow of kerosene (paraffin) by
squeezing the bulb of the siphon vigorously six or seven
times. Once flow begins, it is no longer necessary to squeeze
the bulb.

4. Check the removable tank fuel gauge while filling the tank.

Stop filling by loosening the switch button on top of the
pump (turn anti-clockwise), once the gauge indicates that the
tank is full. Never overfill the tank, especially not when the
fuel is very cold (fuel expands when it heats up).

5. Remove the siphon carefully, allowing excess kerosene

6. After making sure fuel tank cap is tightly fastened, invert tank

NOTE:Be careful to avoid overfilling the tank, especially with

very cold kerosene (paraffin). Overflow might occur
due to expansion when the fuel warms up.

(paraffin) to drain from the tube back into the jerrycans.
Replace fuel tank cap and tighten it securely. Be sure to wipe
away any spilled kerosene (paraffin) from tank and other
heater parts.

and replace into heater body.

4