Toto TSST Installation And Owner's Manual

Warranty Registration and Inquiry For product warranty registration, TOTO U.S.A. Inc. recommends online warranty registration. Please visit our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please con­tact TOTO U.S.A. Inc., Customer Service Department, 1155 Southern Road, Morrow, GA 30260 (888) 295-8134 or (678) 466-1300 when calling from outside of U.S.A.
Installation and Owner’s Manual
Manual de Instrucciones y del Propietario
½” Thermostatic Mixing Valve
(Rough Valve Only)
Válvula de Mexcla Termostática ½” (13mm)
(Válvula Áspera Solamente)
Valve de Mélange Thermostatique de ½” (13mm)
(Corps d’Encastrement Uniquement)
TSST
2
ENGLISH
THANKS FOR CHOOSING TOTO!
TABLE OF CONTENTS
WARNINGS
Thanks for Choosing TOTO®! ���������������������������������������������������������������������������� 2 Warnings ��������������������������������������������������������������������������������������������������������������2 Tools You Will Need �������������������������������������������������������������������������������������������� 3 Before Installation �����������������������������������������������������������������������������������������������3 Care and Cleaning
����������������������������������������������������������������������������������������������3 Installation Procedure �����������������������������������������������������������������������������������������4 Calibration Procedure ���������������������������������������������������������������������������������������� 5 Accessing and Cleaning the Valves �������������������������������������������������������������������6 Warranty ���������������������������������������������������������������������������������������������������������������7 Rough-In Dimensions ����������������������������������������������������������������������������������������20 Troubleshooting ������������������������������������������������������������������������������������������������21 Spare Parts �������������������������������������������������������������������������������������������������������� 22
The mission of TOTO is to provide the world with healthy, hygienic and more comfortable lifestyles� We design every product with the balance of form and function as a guiding principle� Congratulations on your choice�
 Requires volume control valve or positive shut off valve.
 RISK OF SCALDING: This valve must be calibrated by the installer (see
valve calibration procedure on page 5)� Once calibrated, this valve has a limiter to prevent the temperature from exceeding 120ºF (49°C)�
 If you are soldering during installation, do not apply excessive heat to
the valve body� Excessive heat may damage the internal seals and plastic components�
 Please do not use this valve if there is a large difference in the pressure
between the hot and cold water supplies�  Hot water supply temperature should not exceed 140°F (60°C)�  Do not use this valve at an ambient temperature below 32°F (0°C)�  Do not reverse the hot and cold water inlets�  Insulate the hot water supply pipe to minimize heat loss�  Do not use steam for the hot water supply�  Do not disassemble the thermostatic cartridge�
3
ENGLISH
CARE & CLEANING
Your new valve is designed for years of trouble-free performance� keep it looking new by cleaning it periodically with mild soap, rinsing thoroughly with warm water and drying with a clean, soft cloth� Do not use abrasive cleaners, steel wool or harsh chemicals, as these will dull the finish� Failure to follow these instructions may void your warranty�
TOOLS YOU WILL NEED
BEFORE YOU START INSTALLATION
MAX
MIN
 Observe all local plumbing codes�  Flush all piping thoroughly before installing the valve�  Make sure the water supply is shut off�  Read these instructions carefully to ensure proper installation�  TOTO® reserves the right to update product design without notice�  Check to make sure you have the following parts indicated below:
Pipe Tape Thermometer
Adjustable
Pliers
Adjustable
Wrench
Screwdriver
Valve
Plaster
Guard
10°
70°
120°
4
ENGLISH
INSTALLATION PROCEDURE
1) Turn off the main water supply�
2) Plumb the valve so that outside of the finished wall lands between the max and min indicated on the plaster guard� (i�e� A=2-1/2” to 3-3/4” [65-95mm]� See where “A” is located on Illustration 2 below�)
3) Connect the hot water supply to the left inlet marked “H” and the cold water supply to the right inlet marked “C”�
4) Secure the pipes and the valve to the frame�
5) Remove the plaster guard from the valve� Use the plaster guard to trace the cut-out opening�
6) Reattach the plaster guard to the
valve� Do not remove the guard
again until you are ready to install the trim�
7) Finish the wall�
Hot Water
In
Cold
Water In
Mixed Water Out
Valve
Plaster
Guard
CAUTION: RISK OF PERSONAL INJURY.
When this valve is installed, it must be calibrated to minimize the risk of scalding after calibration� The maximum water temperature should never exceed 120°F (49°C)�
Plaster Guard
ILLUSTRATION 2
ILLUSTRATION 1
5
ENGLISH
CALIBRATION PROCEDURE
1) Shut off the hot and cold water supply at the service stops�
2) Remove the trim adapter� Check to make sure the v-groove of the limiter aligns with the v-groove of the main unit� If it is not aligned, slide the limiter out and re-install, making sure to align the two grooves�
3) Re-install the nut�
4) Turn on the water supply at the service stops�
5) Turn the water on and let run for about 1 minute� Place a thermometer in the water stream�
6) Slowly turn the mixing valve stem until the water temperature is at a constant 104ºF (40ºC)�
No t e: After the water temperature is set
at 104ºF (40ºC), do not turn the valve stem until you have installed the handle trim� If the valve is turned accidentally, you will need to repeat the calibration procedure�
7) Install the handle trim as instructed in the trim manual�
After the valve is calibrated, the limiter provides 108ºF (42ºC) at the first stop position and prevents the temperature from exceeding 120ºF (49ºC) at the final stop position�
Perform this calibration procedure when you are ready to install the trims�
Trim Adapter
V-Groove
Valve Stem
Service Stop
NOTE: These illustra­tions show the valve after installation and finishing of the wall�
6
ENGLISH
ACCESSING AND CLEANING THE VALVES
To clean the check valve unit:
1) Remove the check valve units (see Illustration 2)�
2) Rinse the filter on the check valve in water to remove any debris�
To clean the thermostatic unit:
1) Remove the retainer sleeve, temperature limit stop and valve stem (see Illustration 3)�
2) Remove the valve lock unit�
3) To remove the thermostatic unit, insert the screwdriver into the slot on the valve body (see Illustration
4) and gently pry it loose�
IMPORTANT: The thermostatic unit is a specially constructed piece and should never be disassembled� Only use a screw­driver to remove the thermostatic unit�
CAUTION: Before accessing and cleaning the valves, make sure you close off the hot and cold supply valves with a screwdriver (see Illus­tration 1) to prevent accidental scalding or personal/property damage�
ILLUSTRATION 1
ILLUSTRATION 2
Check
Valve Unit
Check
Valve Unit
Valve Lock Nut
Thermostatic
Unit
ILLUSTRATION 3
Retainer
Sleeve
Temperature
Limit Stop
Valve Stem
ILLUSTRATION 4
Thermo
Unit
ILLUSTRATION 5
4) After removing the thermostatic unit, clean
it by using water and a toothbrush or a similarly soft-bristled brush on the filter screens of the unit�
IMPORTANT: Do not use a wire or steel brush as this may dam­age the unit�
7
ENGLISH
1� TOTO® warrants its residential faucets and bathroom accessories (“Product) to be free from defects in
materials and workmanship during normal use when properly installed and serviced, for the lifetime of the Product from date of purchase� This limited warranty is extended only to the ORIGINAL PURCHASER of the Product and is not transferable to any third party, including but not limited to any subsequent purchaser or owner of the Product� This warranty applies only to TOTO Product purchased and installed in North, Central and South America�
2� TOTO’s obligations under this warranty are limited to repair, replacement or other appropriate
adjustment, at TOTO’s option, of the Product or parts found to be defective in normal use, provided that such Product was properly installed, used and serviced in accordance with instructions� TOTO reserves the right to make such inspections as may be necessary in order to determine the cause of the defect� TOTO will not charge for labor or parts in connection with warranty repairs or replacements� TOTO is not responsible for the cost of removal, return and/or reinstallation of the Product�
3� This warranty does not apply to the following items: a� Damage or loss sustained in a natural calamity such as fire, earthquake, flood, thunder, electrical
storm, etc�
b� Damage or loss resulting from any accident, unreasonable use, misuse, abuse, negligence, or
improper care, cleaning, or maintenance of the Product� c� Damage or loss resulting from sediments or foreign matter contained in a water system� d� Damage or loss resulting from improper installation or from installation of the Product in a harsh
and/or hazardous environment, or improper removal, repair or modification of the Product� e� Damage or loss resulting from electrical surges or lightning strikes or other acts which are not the
fault of TOTO or which the Product is not specified to tolerate� f� Damage or loss resulting from normal and customary wear and tear, such as gloss reduction,
scratching or fading over time due to use, cleaning practices or water or atmospheric conditions,
including but not limited to, the use of bleach, alkali, acid cleaners, dry (powder) cleaners or any
other abrasive cleaners or the use of metal or nylon scrubbers�
4� In order for this limited warranty to be valid, proof of purchase is required� TOTO encourages warranty
registration upon purchase to create a record of Product ownership at http://www�totousa�com� Product registration is completely voluntary and failure to register will not diminish your limited warranty rights�
5� If the Product is used commercially or is installed outside of North, Central or South America, TOTO
warrants the Product to be free from defects in materials and workmanship during normal use for one (1) year from the date of installation of the Product, and all other terms of this warranty shall be applicable except the duration of the warranty�
6� THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS� YOU MAY HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE, PROVINCE TO PROVINCE OR COUNTRY TO COUNTRY�
7� To obtain warranty repair service under this warranty, you must take the Product or deliver it prepaid to
a TOTO service facility together with proof of purchase (original sales receipt) and a letter stating the problem, or contact a TOTO distributor or products service contractor, or write directly to TOTO U�S�A�, INC�, 1155 Southern Road, Morrow, GA 30260 (888) 295 8134 or (678) 466-1300, if outside the U�S�A� If, because of the size of the Product or nature of the defect, the Product cannot be returned to TOTO, receipt by TOTO of written notice of the defect together with proof of purchase (original sales receipt) shall constitute delivery� In such case, TOTO may choose to repair the Product at the purchaser’s location or pay to transport the Product to a service facility�
THIS WRITTEN WARRANTY IS THE ONLY WARRANTY MADE BY TOTO� REPAIR, REPLACEMENT OR OTHER APPROPRIATE ADJUSTMENT AS PROVIDED UNDER THIS WARRANTY SHALL BE THE EXCLUSIVE REMEDY AVAILABLE TO THE ORIGINAL PURCHASER� TOTO SHALL NOT BE RESPONSIBLE FOR LOSS OF THE PRODUCT OR FOR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR EXPENSES INCURRED BY THE ORIGINAL PURCHASER, OR FOR LABOR OR OTHER COSTS DUE TO INSTALLATION OR REMOVAL, OR COSTS OF REPAIRS BY OTHERS, OR FOR ANY OTHER EXPENSE NOT SPECIFICALLY STATED ABOVE� IN NO EVENT WILL TOTO’S RESPONSIBILITY EXCEED THE PURCHASE PRICE OF THE PRODUCT� EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR USE OR FOR A PARTICULAR PURPOSE, ARE EXPRESSLY DISCLAIMED� SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION AND EXCLUSION MAY NOT APPLY TO YOU�
WARRANTY
8
ESPAÑOL
ÍNDICE
¡GRACIAS POR ELEGIR TOTO!
ADVERTENCIAS
¡Gracias por elegir TOTO®! �������������������������������������������������������������������������������8 Advertencias ��������������������������������������������������������������������������������������������������������8 Herramientas que Necesita �������������������������������������������������������������������������������� 9 Antes de la Instalación ���������������������������������������������������������������������������������������� 9 Cuidado y Limpieza ��������������������������������������������������������������������������������������������� 9 Procedimiento de Instalación ���������������������������������������������������������������������������10 Procedimiento de Calibración �������������������������������������������������������������������������11 Accediendo y Limpiando las Válvulas �������������������������������������������������������������� 12 Garantía �������������������������������������������������������������������������������������������������������������� 13 Dimensiones Preliminares ��������������������������������������������������������������������������������20 Resolución de Problemas ���������������������������������������������������������������������������������21 Piezas de Repuesto �������������������������������������������������������������������������������������������22
La misión de TOTO es dar al mundo estilos de vida más saludables, higiénicos y cómodos� Diseñamos cada producto guiándonos por el principio del equilibrio entre forma y función� Felicitaciones por su elección�
 Necesita válvula de control de volumen o válvula de cierre positiva.
 RIESGO DE QUEMADURA: Esta v válvula debe ser calibrada cuando se instala (véase el procedimiento de calibración de la válvula)� Una vez cali­brada, esta válvula limitará la temperatura del agua a un máximo de 120ºF (49°C)�
 Si fuera necesario soldar durante la instalación, no permita que la válvula
se caliente excesivamente� El calor excesivo podría dañar las juntas y los componentes plásticos internos�
 No usar la válvula si hubiera una diferencia considerable de presión entre
las líneas de agua caliente y fría�
 La temperatura de suministro de agua caliente no debe ser superior a
140°F (60°C)�
 No usar este producto si la temperatura ambiente es menor que 32°F
(0°C)�  No invertir la entrada de agua caliente ni de agua fría�  Aplicar aislante térmico a la línea de agua caliente para reducir al mínimo
la pérdida de calor�  No inyectar vapor en la línea de agua caliente�  No desarmar la unidad del cartucho termostático�
Loading...
+ 16 hidden pages