TotemDuino Micro Lab is a breadboarding and testing unit.
Perfect platform for learning electronics and programming for a beginner or a
hobbyist user. A laboratory built on a sturdy Totem mechanical structure and
based on an open-source Arduino platform.
What’s in the box:
• Building instructions – suggested use of Totem parts for building
a workbench where everything neatly mounts together.
• TotemDuino board – our improved version of Arduino UNO.
• Breadboard CYB-60 – the experimentation area.
• Standard USB 2.0 Mini Cable – A-male to mini-male.
• Collection of Totem construction parts – for building Totem
workbench.
• Totem magnetic screwdriver with strong magnetic grip – bolt
firmly stays on screwdriver even when shaking it.
Main features:
• Wide power supply range – from 5 to 30 V DC.
• TotemDuino board – our improved version of Arduino UNO with
32kB flash memory.
• Powerful voltage regulator – up to 1.5A at 5V.
• Compatible with Totem MiniLab Side Panel extension boards as
an expansion.
Micro Lab frame:
• No more messy electronics: Micro Lab is organized on 3-
dimensional frame: it is easy to see, wire and reach all elements.
• It is easy to upgrade: add extra mechanics or electronics.
• Micro Lab includes all mechanical elements needed for the
assembly of the frame: Totem Beams are already cut and ready to
use. Totem Magnetic Screwdriver is included.
• Move your Micro Lab safely without any wires losing connection
or mishaps.
TotemDuino:
TotemDuino expands upon the great Arduino UNO platform idea. While it is
kept fully backwards compatible with Arduino and a lot of additional features
are included as well:
• Output protection – all of its output pins going into LabBoard
protected against over-voltage or short-circuit conditions.
• Expansion port – a 34 pin flat-cable connection connects to the
LabBoard for easy pin access.
• Powerful 5V regulator – you will be less likely to run out of power
while experimenting with higher power loads.
• Selectable microcontroller logic voltage – TotemDuino can work
with both 5V and 3.3V logic voltage just by the flip of a switch.
Expand Micro Lab with Side Panels:
Totem Micro Lab can be used with Side Panels — they give you access to
various pre-built sensors, drivers, buttons and relays. Side Panels attach
directly to the Micro Lab structure and simple breadboard wires are used for
connections.
Side Panels contain various functionalities — Input/Output, Sensors and
Audio.
Loading...