Toshiba WAL7C User Manual

Wall mounting WAL7C for LCD color TV Instruction for Installation

Thank you for purchasing this Toshiba Wall mounting. For correct installation, please read this manual carefully. This manual should be saved and kept on hand as a convenient reference. This Wall mounting is designed exclusively for a Toshiba LCD color TV.

Special technology and knowledge are required for the wall fixing. Please ask qualified applicators for installation.

Notice for dealers and installation applicators

For safety of the user, please make sure the installation area has strength enough to bear the weight of LCD color TV and Wall mounting, and install with care.

■ Please read the warnings and notice on the back carefully for correct use. Installation Notice

To prevent human hazards or property damage and ensure safe and correct use, this manual has recorded some important content such as the installation method. Please read it with full understanding of the following diagram & marks and observe the recorded items.

Please observe the following instructions

Warning

Please ask qualified applicators to install the equipment to the wall. The inadequate

•

application may cause the fall of a LCD color TV, resulting in injury.

Direction

Reinforce the installation area to make sure it is capable to bear the weight including the LCD

•

color TV and resistant to impact of earthquake or shock. The inadequate application may

Direction

cause the fall of the LCD color TV resulting injury. So, please reserve the following instructions.

A socket should be used for the power supply of a LCD color TV. Please use a socket out

•

of which the plug can be pulled easily.

Make sure the total weight is borne by the beam. The beam should be reinforced in case of inadequate strength. Please do not install the product on the plasterboard.

Please use the market available anchor bolt which can bear the weight of the LCD color TV.

[Marks]

Mark Meaning of the mark

Warning

Caution

[Diagrams]

Diagram

Prohibition

Direction

Indicates "It could result in your death or serious injury*1 if you don't follow instructions"

Indicates "It could result in your injury*2 or property damage*3 if you don't follow instructions"

*1: Serious injury herein refers to conditions such as blindness, wound, burn

(whatever high or low temperature), electric shock, fracture, poisoning etc. which may leave a sequela and require hospitalization or long medical treatment.

*2: Injury herein refers to conditions such as wound, burn or electric shock etc.

which does not require hospitalization or long medical treatment.

*3: Property damage herein refers to damage of house, household, livestock or

pet involved.

Meaning of the diagram

" " indicates a prohibited action (Do not do). The action prohibited is described within or near the symbol by diagram or word.

" " indicates a required action (Do). The action required is described within or near the symbol by diagram or word.

Direction

Prohibition

Direction

Embed the metal hook fixed on the wall into the metal hole of the LCD color TV completely,

•

slide and make sure it will not fall. Otherwise the TV may fall resulting in injury.

The wall mounting is designed exclusively for a Toshiba LCD color TV Do not use it elsewhere.

•

Otherwise it may fall causing injury.

Caution

Do not jam the LCD color TV blowhole on the top of the screen. If the blowhole is jammed,

•

heat will gather inside the TV, causing a fire.

Do not install at places near the vent of air conditioner or frequently vibrate, or places directly

•

blown by moisture, dust, smoke or steam (stove, electric cooker, humidifier etc.). Otherwise may cause fire or electric shock.

The angle of the screen of an installed LCD color TV cannot be changed. The forced turn

•

may loosen fixing bolt leading to the fall of the LCD color TV.

■ Exemptions

Toshiba is not liable for any damage caused by natural disaster (such as fire, earthquake), uses by third person,

•

accidents, owner's intentional misuse, or uses in other improper conditions. Toshiba is not liable for incidental damages (such as profit loss or interruption in business, TV watching fee loss

•

etc.) caused by use or unable use of the product. Toshiba is not liable for any damage caused by neglect of the instruction described in the instruction manual.

•

Toshiba is not liable for any injury/damage caused by improper installation of this product.

•

If the product is installed to the wall and then disassembled, the screw hole and fixing bolts will remain on the wall.

•

Over an extended period of use of your LCD color TV, dirt or discoloration may occur to the supporting wall.

•

DALIAN TOSHIBA TELEVISION CO., LTD.

VF2A00172000

Model applicable : 19AV550 Series

Assemble (TV set body and stand fix type)

（1）

（2）

Please take out the LCD color TV from the LCD TV case.

Remove the stand part from the LCD TV.

1 Rotate the TV stand to its position generally used.

To avoid scratching the LCD screen, please place a soft cloth on a table etc, and then put the LCD TV on the cloth with its screen facing down.

2 Remove the 4 screws used to fix the stand. 3 Remove the stand from the TV.

4 securing screws

Caution

The supplied screws and paddings should be used. Other screws and paddings may cause function change, electric shock (in case of long screws), or lead to insufficient strength (in case of short screws) etc.

■ Parts list

Product name Quantity

TV side bracket 1 Wall-mount bracket 1 Tilt-adjustable bracket 1 Tilt-adjustable bracket securing screw

(M5 × 14mm) Screw (M4 × 14mm) 4

Spacer (with tape attached) 4

Nominal method of screws is as below.

t=1.8

SPRING WASHIER

FLAT WASHER

（5）

Attach the Wall-mount Bracket.

Attach the wall-mount bracket to the wall with 4 commercial available screws or expansion anchor bolts, referring to the bottom right table. (4 positions shown as below) Be sure to fix the screws into the strong and reliable wood or post inside the wall firmly. (Attaching on the boards such as thin complex board/ plasterboard will be very dangerous, so please be sure to avoid such places.)

（6）

■ Determine the Position before Attaching the

Attach the LCD TV to the tilt-adjustable bracket installed on the wall.

1 Align the bracket holes on the rear of the LCD TV

with the hooks of the tilt-adjustable bracket, and then hook the TV. (This illustration is drawn as you can see through the TV.)

Hook

2 By slightly lowering the LCD TV, you can hitch it on

the hook.

Wall-mount Bracket

The relationship of position for the LCD TV and the Wall-mount bracket is shown as below. Please ask the customers to decide the position of the TV in advance, and then attach the bracket.

Remove the stand

Stand part

* Please keep to the stand and fix screws.

（3）

Attach the bracket of TV side to the LCD color TV.

1 Tear off adhesive tapes of the supplied (four)

paddings, align its hole with fixing bolts, and affix it to the screw place of TV side.

2 Align the screw hole of bracket of TV side with which

of the TV, attach the bracket firmly to the TV with four supplied screws (M4 × 14mm).

To fix at 4 outer side holes

TV mounting bracket

Spacer

（4）

Assemble the tilt-adjustable bracket, adjust the angle.

1 Assemble the wall-mount bracket and the tilt-adjust-

able bracket with 2 tilt-adjustable bracket securing screws threading through the rotation center hole. (Slightly tighten the 2 screws.)

Wall-mount bracket

Rotation center

Tilt-adjustable bracket

2 Move the tilt-adjustable bracket to align it with the

closet hole according to your preference angle, then fix it temporarily with 2 securing screws.

Tilt-adjustable bracket

Wall-mount bracket

3 After installing the TV, confirm the preference angle

with the customers and make adjustment according to the points described in (2) above. After making adjustment, tighten firmly the 4 securing screws mentioned in (1) and (2) above to fix the tilt-adjustable bracket fully.

Lower side of Wall-mount Bracket

149 mm

■ Angle adjustment of the LCD TV is shown as below

the 1st hole from the top tilt upwards 20 degrees

the 2nd hole tilt upwards 10 degrees

the 3rd hole tilt 0 degree the 4th hole tilt downwards 10 degrees the 5th hole tilt downwards 20 degrees

LCD TV side

Slightly lower to hitch it on the hook

3 Move left the LCD TV to lock it. Make sure that the

TV will not fall off.

Move left to lock it

■ Wall material/Screw, Expansion Anchor Bolt Corresponding Table

Wall material Expansion anchor bolt/

screw used

Plasterboard/ fix into the post inside the wall Complex board the screw firmly fixable into the (less than 10mm) post inside the wall Complex board tapping screw (ø 4 × 18)

(above 10mm) Wood post tapping screw (ø 4 × 18) Concrete expansion anchor bolt (T-660)