Toshiba UT1A1A010C6, UT1A1A015C6, UT1A1A020C6, UT1A1A030C6, UT1A1A010C6R KB2 User Manual

IMPORTANT NOTICE

The instructions contained in this manual are not intended to cover all o f the details or
variations in equipment, or to provide for every possible contingency concerning
installation, operation, or maintenance. Should further information be required or if
problems arise which are not covered sufficiently, contact your local Toshiba sales
office or [phone] or by e-mail at [e-mail].

The contents of this instruction manual shall not become a part of or modify any prior or
existing agreement, commitment, or relationship. The sales co n tra ct co nta in s th e en tir e
obligation of Toshiba International Corporation (TIC) 's Uninterruptible Power Systems
(UPS) Division. The warranty contained in the contract between the parties is the sole
warranty of TIC's UPS Division an d a ny statem ents contained herein do not create new
warranties or modify the existing warranty.

Any electrical or mechanical modifications to this equipment without prior
written consent of Toshiba International Corporation will void all warranties and
may void the UL/CUL listing. Unauthorized modifications can also result in
personal injury, death, or destruction of the equipment.

I

UNINTERRUPTIBLE POWER SYSTEM

Complete the information below for the UPS received.

Unless otherwise specified on the warranty card, the warranty period for the UPS or
UPS part is 36 months from the shipment date (see TIC Bill of Lading).

Unless otherwise specified on the warranty card, the warranty period for a UPS battery
is 24 months from the shipment date (see TIC Bill of Lading).

Please complete the following information and retain for your records.

Job Number: ________________________________________________________

Model Number: _____________________________________________________

Serial Number: ______________________________________________________

Application: ________________________________________________________

Shipment Date: ______________________________________________________

Installation Date: ____________________________________________________

Inspected By: _______________________________________________________

January, 2007

Document Number: 57723-003

II

Table of Contents

Manual’s Purpose and Scope................................................................................V

Contacting T oshiba International Corporation’s Customer Support Center...... VII

EMC Statements...............................................................................................VIII

General Safety Instructions..................................................................................X

Important Safety Instructions........................................................................... XIII

Instructions Importantes Concernant................................................................XVI

Inspection/Storage/Disposal............................................................................XVII

Installation Precautions....................................................................................XIX

Operating Precautions......................................................................................XXI

1. Introduction.......................................................................................................1

2. System Description...........................................................................................1

2.1 General Description .........................................................................................2

2.2 Efficiency Optimizer Function.........................................................................3

2.3 Free Run Mode.................................................................................................4

2.4 Diagnostic Tests...............................................................................................4

2.5 System Configuration.......................................................................................4

3. Storage ..............................................................................................................6

4. Installation ........................................................................................................7

4.1 Environment.....................................................................................................7

4.2 Rear Panel Views .............................................................................................8

4.3 Connection to main supply and loads (1000 – 3000 VA)...............................10

4.4 Front Panel Settings .......................................................................................12

5. Computer and Alarm Connections..................................................................14

5.1 RS-232 Standard Interface Port......................................................................14

5.2 Dry Contact Interface (optional card) ............................................................15

5.3 USB Port........................................................................................................15

III

5.4

EPO Port (emergency power off)...................................................................16

5.5 Network Transient Protector..........................................................................16

5.6 Load Segments...............................................................................................16

6. User’s Guide to Operations.............................................................................17

6.1 UPS Startup and Shutdown............................................................................17

6.2 Button Operation............................................................................................17

6.3 Control Panel Functions.................................................................................18

6.4 Normal Display..............................................................................................19

6.5 UPS Meters Display.......................................................................................19

6.6 UPS Configurations .......................................................................................20

6.7 UPS Manual Test............................................................................................21

6.8 Interpreting UPS Messages............................................................................21

6.9 Audible Alarms..............................................................................................21

6.10 Silencing an Alarm..................................................................................21

6.11 Troubleshooting......................................................................................22

7. Maintenance....................................................................................................23

8. Technical Specifications .................................................................................24

8.1 Power Range 1000-3000 VA (120V)..............................................................24

8.2 Power Range 1000-3000 VA (230V)..............................................................25

9. Warranty Information......................................................................................26

LIMIT ATIONS AND EXCLUSIONS.................................................................27

IV

Manual’s Purpose and Scope

The purpose of this manual is to provide information on how to safely install, operate,

and maintain your TIC power electronics product. This manual includes a section of
general safety instructions that describes the warning labels and symbols that are used
throughout the manual. Read the manual completely before installing, operating, or
performing maintenance on this equipment.

The scope of this manual is to describe the requirements for an On-Line Uninterruptible

Power System (UPS). The UPS will supply a computer grade AC output sine wave
which is unaffected by the quality of the AC input. The input voltage is single phase and
the output voltage is single phase.

This manual and the accompanying drawings should be considered a permanent part of

the equipment and should be readily available for reference and review. Dimensions
shown in the manual are in metric and/or the English equivalent.

TIC reserves the right, without prior notice, to update information, make product

changes, or to discontinue any product or service identified in this publication.

V

TOSHIBA is a registered trademark of Toshiba Corporation. All other product or trade

references appearing in this manual are registered trademarks of their respective
owners.

Toshiba International Corporation (TIC) shall not be liable for direct, indirect,

special, or consequential damages resulting from the use of the information
contained within this manual.

This manual is copyrighted. No part of this manual may be photocopied or reproduced

in any form without the prior written consent of Toshiba International Corporation.

© Copyright 2006 Toshiba International Corporation.
All rights reserved.
Printed in the U.S.A.

VI

Contacting Toshiba International Corporation’s Customer
Support Center

Toshiba International Corporation’s Customer Support Center can be contacted to
obtain help in resolving any Uninterruptible Power System problems that you may
experience or to provide application information.

The center is open from 8 a.m. to 5 p.m. (CST), Monday through Friday. The Support
Center’s toll free number is US [phone], Fax [phone].

The email address is [e-mail].

You may also contact Toshiba International Corporation by writing to:

T oshiba International Corporation
13131 West Little York Road
Houston, Texas 77041-9990
Attn: 1000 Series UPS Product Manager.

For further information on Toshiba International Corporation’s products and services,
please visit our website at www.toshiba.com/ind

VII

EMC Statements

FCC Part 15

NOTICE: Pursuant to section 15 of the FCC rules this product has been tested and
complies with the conditions of a Class B digital device. The product has been
established as offering sufficient protection against dangerous interference for
installations in a residential area. Installation and use of the equipment should comply
with the instructions provided in order to avoid interference due to the amount of radio
frequency energy that is radiated and generated by the equipment.
TIC cannot assure that no interference will occur. Turn the unit on and off to help
determine if the radio or television reception is found to be influenced by harmful
interference from the equipment. If required, use one of the following measures to
minimize the negative effects of interference:

• Place the receiving antenna in a separate location or orientation.

• Increase the distance between the receiver and the equipment.

• Ensure that your equipment and the receiver are on separate circuits.

• Contact a technician experienced with radio and TV or a dealer for further

assistance.

ICES-003

This Class B Interference Causing Equipment meets all requirements of the Canadian
Interference Causing Equipment Regulations ICES–003. Cet appareil numérique de la
classe B respecte toutes les exigences du Reglement sur le matériel brouilleur du
Canada.

VIII

Declaration of Conformity Request

Units labeled with a CE mark comply with the following standards and directives:
Harmonic Standards: EN 50091-1-1 and EN 50091-2.
EU Directives: 73/23/EEC, Council Directive on equipment designed for use within
certain voltage limits.
93/68/EEC, Amending Directive 73/2 3/ EE C .
89/336/EEC, Council Directive relating to electromagnetic compatibility.
92/31/EEC, Amending Directive 89/336/EEC relating to EMC.
The EC Declaration of Conformity is available upon request for products with a CE
mark.

IX

General Safety Instructions

Si

DANGER

DO NOT attempt to install, operate, maintain or dispose of this equipment until you
have read and understood all of the product safety information and directions that are
contained in this instruction manual.

Safety Alert Symbol / Signal Words

The Safety Alert Symbol indicates that a potential personal injury hazard exists. The
symbol is comprised of an equilateral triangle enclosing an exclamation mark.

Listed below are the signal words that are used throughout this manual followed by their
descriptions and associated symbols. When the words DANGER, WARNING, and
CAUTION are used in this manual they will be followed by important safety
information that must be carefully adhered to.

1. Danger — The word DANGER in capital letters preceded by the safety alert

symbol indicates that an imminently hazardous situation exists that, if not a voi ded,
will result in death or serious injury to personnel.

gnal Words

X

2. Warning — The word WARNING in capital letters preceded by the safety alert

WARNING

CAUTION / ATTENTION

CAUTION

symbol indicates that a potentially hazardous situation exists that, if not avoided,
could result in death or serious injury to personnel.

3. Caution/Attention — The word CAUTION or ATTENTION in capital letter s

preceded by the safety alert symbol indicates that a potentially hazardous situation
exists that, if not avoided, may result in minor or moderate injury.

4. The word CAUTION without the safety alert symbol indicates a potentially

hazardous situation exists which, if not avoided, may result in equipment and
property damage.

XI

Special Symbols

Other warning symbols may appear in conjunction with the Danger, Warning, and
Caution symbol and are used to specify special hazards. These warnings describe

particular areas where special care and/or procedures are required in order to prevent
serious injury and possible death.

1. ELECTRICAL HAZARD SYMBOL – Indicates a hazard that may cause injury

from an electrical shock or burn. The symbol is comprised of an equilateral triangle
enclosing a lightning bolt.

2. EXPLOSION HARZARD SYMBOL – Indicates a hazard that may cause injury

from exploding parts. It is comprised of an equilateral triangle enclosing an
explosion image.

XII

Important Safety Instructions

This manual contains important instructions that should be followed during the
installation, maintenance, and operation of the UPS and its batteries to assure safe and
proper operation.

1. Turn off, lockout, and tagout all power sources before connecting the power wiring

to the equipment or when performing maintenance.

2. Hardwire type UPS units are not equipped with an over-current protection device,

nor do they have an output disconnect for the ac output. Th eref ore, a user-installed
circuit breaker should be provided between the UPS outp ut and the load input .

3. The maximum ambient operating temperature is 104° F (40° C).

4. Battery servicing should be performed by a qualified Toshiba Representative only.

5. Unauthorized personnel should not service batteries.

6. Contact your nearest Toshiba authorized service center for battery replacement.

Qualified Personnel ONLY!

Qualified Personnel is one that has the skills and knowledge relating to the
construction, installation, operation, and maintenance of the electrical equipment and
has received safety training on the hazards involved (Refer to the latest edition of NFPA
70E for additional safety requirements).

Qualified Personnel shall:

1. Have read the entire operation manual.

2. Be trained and authorized to safely energize, de-energize, ground, lockout and tag

circuits and equipment, and clear faults in accordance with established safety
practices.

3. Be trained in the proper care and use of protect i ve equipment such as safety shoes,

rubber gloves, hard hats, safety glasses, face shields, flash clothing, etc., in
accordance with established safety practices.

4. Be trained in rendering first aid.

5. Be knowledgeable of batteries and the required handling and maintenance

precautions.

XIII

For further information on workplace safety visit www.osha.gov

WARNING

CAUTION

CAUTION

DANGER

Misuse of this equipment could result in injury and equipment damage. In no event will
T oshiba Corporation be responsible or liable for either indirect or c onsequential dam age
or injury that may result from the misuse of this equipment.

Do not dispose of the batteries in a fire. The batteries may explode.

Do not open or mutilate the batteries. Released electrolyte is harmful to the eyes and
skin and could also be toxic.

A battery can present a risk of electrical shock and high short circuit current.

XIV

—Strict adherence to the following precautions is a requirement when working with
batteries—

To be performed by Qualified Personnel only.

1. Verify that the UPS is off and that the power cord is disconnected from the power

source.

2. Remove watches, rings or other metal object s.

3. Use tools with insulated handles to prevent inadvertent shorts.

4. Wear rubber gloves and boots.

5. Do not place tools or any metal parts on top of batteries.

6. Determine if the battery is inadvertently grounded. If inadvertently grounded,

remove source of ground.

Contact with any part of a grounded battery can result in electrical shock.

The likelihood of shock will be reduced if such grounds are removed prior to
installation or maintenance.

XV

Instructions Importantes Concernant

ATTENTION

ATTENTION

LA SÉCURITÉ
CONSERVER CES INSTRUCTIONS

Cette notice contient des instructions importantes concernant la sécurité.

Une battery peut présenter un risque de choc électrique, de brûlure par transfert d'
énergie.

L' élimination des batteries est règlementèe. Consulter les codes locaux à cet effet.

XVI