Toshiba 32SL863B, 37SL863B, 46SL863B, UL86* Digital Series, SL86* Digital Series Owner's Manual

...

SL86* Digital

Series

UL86* Digital

Series

English

Contents

INSTALLING YOUR TV

Safety Precautions .............................................................................4

Installation and important information ..................................... 5

The remote control ........................................................................... 8

Inserting batteries and effective range ............................ 8

The remote control ........................................................................... 9

Inserting batteries and effective range ............................ 9

CONNECTING YOUR TV

Connecting external equipment ................................................10

Connecting an HDMI® or DVI device to the HDMI input ...11

To connect an HDMI device ...............................................11

To connect a DVI device ......................................................11

HDMI’s ARC (Audio Return Channel) feature ...............11

REGZA-LINK connection ................................................................12

Connecting a computer ................................................................13

To connect a PC to the RGB/PC terminal .......................13

To connect a PC to the HDMI terminal ...........................13

Connecting a home network ......................................................14

To connect the TV to a home network - Wired ...........14

To connect the TV to a home network with an internet

connection - Wireless .......................................................14

Setting up the USB HDD (for UL86 series) ..............................15

Controls and input connections .................................................16

Switching on ............................................................................16

Using the remote control ....................................................16

Using the controls and connections ...............................16

MENU structure ................................................................................17

SETTING UP YOUR TV

Startup Application .........................................................................18

Ant/Cable/Satellite (if available) .......................................19

Satellite Settings .....................................................................20

Auto Tuning .............................................................................22

ATV Manual Tuning .........................................................................23

Tuning ........................................................................................23

Skip ..............................................................................................24

Sorting positions ....................................................................24

DTV Manual Tuning ........................................................................25

Manual Tuning ........................................................................25

Manual Tuning for DVB-C ...................................................25

Manual Tuning for DVB-S ....................................................25

DTV Settings ......................................................................................26

Channels (Antenna/Cable) .................................................26

Channels (Satellite) ................................................................27

Standby Channel Update ....................................................27

DVB Character Set ..................................................................27

Dynamic Scan ..........................................................................27

Location setting ......................................................................28

Analogue switch-off ............................................................28

CONTROLS AND FEATURES

General controls ............................................................................... 29

Quick Menu .............................................................................. 29

Selecting positions ................................................................29

The Time Display – analogue only .................................29

Stereo and Bilingual transmissions .................................29

Sound controls .................................................................................30

Volume controls and sound mute ...................................30

Dual .............................................................................................30

Balance ......................................................................................30

Sound Navi ............................................................................... 30

Surround Settings ..................................................................30

Dolby Volume® .......................................................................30

Dynamic Range Control ......................................................31

Audio Level Offset .................................................................31

Headphone Settings .............................................................31

Audio Description .................................................................31

Widescreen viewing ....................................................................... 32

Picture controls ................................................................................ 34

Picture Mode ........................................................................... 34

Picture preferences ...............................................................34

Reset ...........................................................................................34

ColourMaster ...........................................................................34

Base Colour Adjustment .....................................................35

Colour Temperature .............................................................35

Auto Brightness Sensor Settings ......................................35

Active Backlight Control ......................................................35

Black/White Level ..................................................................36

Static Gamma ..........................................................................36

MPEG NR – Noise Reduction ..............................................36

DNR – Digital Noise Reduction .........................................36

Resolution+ ..............................................................................36

Active Vision M100 ................................................................36

Motion Detection Range .....................................................36

Resetting the advanced picture settings ......................37

Expert Picture Settings ........................................................37

Control Visualization ............................................................ 39

Automatic Format (Widescreen) ......................................39

4:3 Stretch ................................................................................ 39

Blue Screen .............................................................................. 39

Picture Position ...................................................................... 39

Picture still ................................................................................ 40

HDMI Information Display .................................................. 40

Using your home network ........................................................... 41

Wireless LAN Information (for UL86 series) ............................ 42

Setting up the Network ................................................................. 43

Wireless Setup ........................................................................43

Advanced Network Setup .................................................. 45

DNS Setup ................................................................................46

Network Connection Test ................................................... 47

Using the software keyboard ......................................................47

Network Device Setup ...................................................................48

External Control Setup .........................................................48

Media Renderer Setup .........................................................48

English

Using the USB HDD Function (for UL86 series) .....................49

To record DTV programmes

(One Touch Recording) ....................................................49

To schedule programmed recording .............................49

To check, edit or delete scheduling information .......52

To view a recorded programme .......................................53

Operations from the Library screen ................................53

Other useful functions (Time Shift Recording) ............54

Recording Setup .....................................................................55

To disconnect a USB HDD ...................................................56

To confirm/delete Recording Information ...................56

Scheduling priority ................................................................57

Camera Sensor Settings ................................................................57

Device Name Setup ...............................................................58

Using Toshiba Places ......................................................................58

Using BBC iPlayer .............................................................................59

Using YouTube™ ..............................................................................59

Using the Function Menu ...................................................60

Using the Media Player ..................................................................62

Basic operation .......................................................................62

Viewing photo files

(on a DLNA CERTIFIED™ Server or USB device) .......64

Viewing movie files

(on a DLNA CERTIFIED™ Server or USB device) .......65

Playing music files

(on a DLNA CERTIFIED™ Server or USB device) .......67

Using the Photo Frame feature ..................................................69

To open Photo Frame ...........................................................69

Setting the features ...............................................................69

Other features ...................................................................................71

Panel Lock .................................................................................71

The timers ...........................................................................................71

Programme Timers – digital only ...................................71

On Timer ....................................................................................72

Sleep Timer ..............................................................................72

Energy Saving Settings ..................................................................73

Automatic Power Down ......................................................73

No Signal Power Down ........................................................73

Digital on-screen information and Programme Guide ......73

Information ..............................................................................73

Guide ..........................................................................................74

Genre selection/searching ..................................................75

Digital settings – parental control ............................................75

Parental PIN Setup .................................................................75

Parental Setup .........................................................................76

Network Lock ..........................................................................76

Digital settings – Channel Options ..........................................76

Selecting favorite channels ................................................76

Favorite Channel Lists ..........................................................76

Skip channels ...........................................................................77

Locking channels ...................................................................77

Digital settings – other settings ................................................77

Subtitles .....................................................................................77

Audio languages ....................................................................77

Common Interface ................................................................78

Software Upgrade and Licences ................................................78

Auto Upgrade ......................................................................... 78

Searching for New Software ..............................................78

Network Upgrade ..................................................................79

Software Licences .................................................................. 79

System Information and Reset TV ............................................. 79

System Information ..............................................................79

Reset TV ..................................................................................... 79

PC Settings .........................................................................................80

Horizontal and Vertical Position .......................................80

Clock Phase ..............................................................................80

Sampling Clock ....................................................................... 80

Reset ...........................................................................................80

Input selection and AV connections ........................................ 81

Input selection ........................................................................81

External input skip .................................................................81

Labeling video input sources ............................................82

PC Audio ................................................................................... 82

HDMI 3 Audio .......................................................................... 82

HDMI Settings .........................................................................83

Digital Audio Output ............................................................83

Using Personal TV Mode ...............................................................84

Using REGZA-LINK ........................................................................... 86

Enable REGZA-LINK ............................................................... 86

TV Auto Power ........................................................................86

Auto Standby ..........................................................................86

Amplifier Control ................................................................... 86

Initial Speaker Setting ..........................................................86

Position Key Pass Through .................................................86

REGZA-LINK input source selection ................................87

REGZA-LINK Device Control ...............................................87

REGZA-LINK one touch play .............................................. 87

REGZA-LINK system standby .............................................87

REGZA-LINK system audio control ..................................88

Toshiba PC compatible with REGZA-LINK ....................88

TEXT SERVICES

Text services ...................................................................................... 89

Selecting modes ....................................................................89

Text information ....................................................................89

Navigating pages using Auto ............................................89

Navigating pages using LIST .............................................89

Control buttons ......................................................................90

PROBLEM SOLVING

Questions and Answers ............................................................... 91

INFORMATION

License Information ........................................................................ 94

Information ........................................................................................96

Specifications and accessories ...................................................99

English

INSTALLING YOUR TV

Safety Precautions

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products, and some points may not apply to the goods you have just purchased.

Leave more than 10cm clearance around the television to allow adequate ventilation. This will prevent overheating and possible damage to the television. Dusty places should also be avoided.

Damage may occur if the television is left in direct sunlight or near a heater. Avoid places subject to extremely high temperatures or humidity. Place in a location where the temperature remains between 5°C (41°F) min. and 35°C (94°F) max.

The mains supply required for this equipment is 220240v AC 50/60Hz. Never connect to a DC supply or any other power source. DO ensure that the television is not standing on the mains lead. Use only the supplied lead. DO NOT cut off the mains plug from this equipment, this incorporates a special Radio Interference Filter, the removal of which will impair its performance. In the UK, the fuse fitted in the plug is approved by ASTA or BSI to BS1362. It should only be replaced by a correctly rated and approved type and the fuse cover must be refitted. IF IN DOUBT, PLEASE CONSULT A COMPETENT ELECTRICIAN.

DO read the operating instructions before you

attempt to use the equipment.

DO ensure that all electrical connections (including

the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturers’ instructions. Switch off and withdraw the mains plug before making or changing connections.

DO consult your dealer if you are ever in doubt about

the installation, operation or safety of your equipment.

WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. See page 5.

DO be careful with glass panels or doors on

equipment.

DO NOT obstruct the ventilation openings of the

equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.

DO NOT allow electrical equipment to be exposed to

dripping or splashing or objects filled with liquids, such as vases, to be placed on the equipment.

DO NOT place hot objects or naked flame sources,

such as lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to fires.

DO NOT use makeshift stands and NEVER fix legs with

wood screws. To ensure complete safety, always fit the manufacturer’s approved stand, bracket or legs with the fixings provided according to the instructions.

DO NOT leave equipment switched on when it is

unattended, unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off by withdrawing the plug, and make sure your family knows how to do this. Special arrangements may need to be made for people with disabilities.

DO NOT continue to operate the equipment if you

are in any doubt about it working normally, or it is damaged in any way – switch off, withdraw the mains plug and consult your dealer.

WARNING – excessive sound pressure from earphones or headphones can cause hearing loss.

ABOVE ALL – NEVER let anyone, especially children, push or hit the screen, or push anything into holes, slots or any other openings in the case.

NEVER guess or take chances with electrical equipment of any kind – it is better to be safe than sorry.

Air Circulation

Heat Damage

Mains Supply

DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND ‘LIVE’ PARTS.

THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE.

Do not

WARNING: To prevent the spread of fire, keep candles or other open flames away from this product at all times.

INSTALLING YOUR TV

English

Installation and important information

Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen.

Place the TV on a stable, level surface that can support the weight of the TV. In order to prevent injury and maintain stability of this apparatus, secure the TV to the level surface using the strap if fitted, or to a wall using a sturdy tie to the P clips provided. Otherwise secure the TV on the level surface using the supplied mounting screw.

The LCD display panels are manufactured using an extremely high level of precision technology; however, sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not a sign of a malfunction.

Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break or damage the screen. Also, please be certain that small items cannot be inserted into slots or openings in the case.

When using a Wall Bracket

Please use a wall bracket appropriate for the size and weight of the LCD TV.

• Two people are required for installation.

• Never use the four screws attached to the TV.

a Unplug and remove any cables and/or other

component connectors from the rear of the TV.

b Carefully lay the front of the unit face down on a flat,

cushioned surface such as a quilt or blanket.

c Follow the instructions provided with your wall

bracket.

Before proceeding, make sure the appropriate bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket.

d Always use the screws supplied or recommended by

the wall mount manufacturer.

Where to install

Sturdy tie (as short as possible)

Stand clip

Fixing strap

Screw (supplied)

Fixing strap

‘P’ Clip

Stand style is dependent on model

Remove four screws. (Do not reuse these screws for attaching a wall bracket.)

INSTALLING YOUR TV

English

The digital reception function of this television is only effective in the countries listed in the “Country” section of the “Setup/System Setup” menu. Depending on country/area, some of this television’s functions may not be available. Reception of future additional or modified services can not be guaranteed with this television.

If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays, video games, on-screen menus, etc. are left on the television screen for any length of time, they could become conspicuous. It is always advisable to reduce both the brightness and contrast settings.

Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3 outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of other size modes (eg: Super Live) will prevent permanent retention.

• The recording function has been designed for private use and entertainment in your home environment. Please note that any commercial use of the recording function could lead to copyright infringement of authors’ rights. Toshiba asks you to respect the intellectual property rights of third parties.

• Before recording to a device connected to the TV, make a test recording and check the recording performance.

• Programmes that are prohibited from copying due to copyright protection cannot be recorded.

• Toshiba shall not be liable for compensation or incidental damages of any kind whatsoever resulting from content that was not properly recorded on the recording device or that was modified or lost.

• Toshiba shall not be liable for damages of any kind whatsoever (breakdown of the recording device, modification or loss of the recorded content, etc.) resulting from malfunction, operating failure or incorrect operation due to combining with another connected device.

• If you connect and register an USB HDD that has been used with a PC or another TV or recorder to this TV, all the data and recorded programmes stored on the disk will be deleted.

• To use an USB HDD that has been used with this TV on a PC, the hard disk must first be formatted with the PC. At this time, all the data stored using the TV will be deleted.

• Do not turn off the power supply to the USB HDD or disconnect the connecting cable while the USB HDD is operating.

Doing so may result in loss of the recorded data or malfunction of the USB HDD.

• If you connect an USB bus-powered device to the USB 1 port, it may interfere with recording on the USB HDD.

The recording function is not available in all countries.

• Please note, that recording on the USB HDD are no

longer playable, after the TV’s main-board was exchanged during service.

Please take note

EXCLUSION CLAUSE

Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by: i) Fire;

ii) Earthquake; iii) Accidental damage; iv) Intentional misuse of the product; v) Use of the product in improper conditions; vi) Loss and/or damage caused to the product whilst in the possession of a third party; vii) Any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s manual; viii) Any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with

associated equipment;

Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product.

NOTE: A Toshiba wall bracket or stand, where available, must be used to maintain the product's BEAB approval.

When Using an USB HDD (for UL86 series)

INSTALLING YOUR TV

English

The camera sensor installed in this TV can detect a person’s face or movement and identify individuals by their registered faces. Please note that certain factors can affect the performance of the sensor function as set out below.

General Sensor Function

• For the sensor to operate (for each function) you will need to be within the sensor detection range as set out below.

• The approximate effective detection range of the camera sensor is as shown below. (Note: The distance and angle of the detection range are based on a standard viewing environment and conditions).

– Horizontal angle: approx. 58° (approx. 29° × 2)

– Vertical angle: approx. 34° (upward approx. 27°,

downward approx. 7°)

–Distance: approx. 50 cm to 500 cm (Personal Identification

Function: approx. 50 cm to 400 cm)

• Do not place anything in front of the TV that may obstruct detection or reduce the sensor detection range.

Motion Detection Function

• Motion detection may be affected by the surrounding environment, such as the brightness of the room. In addition, very slight, small or momentary movement may be undetected.

• Sensor performance can be enhanced by making sure the room is brightly lit and using prolonged and obvious movements.

• Billowing curtains, a pet or variations in illumination in the detection range may be detected as motion, even if there is no person there.

• You can use the camera sensor confirmation menu to check that no movement made by other persons is being detected.

Face Detection Function

• The sensor can detect up to eight persons.

• Face Detection may be affected if: – Your face is obstructed or partially hidden, for example,

by your hair, a mask or a hat, – Your head is tilted or turned to one side, or – You are wearing dark glasses or the light is reflected in

your glasses.

• You can use the camera sensor confirmation menu to check whether your face is detected.

• The camera sensor may detect background images such as a picture portrait or the pattern on the wall as eyes or nose even if there is no person there. You can use the confirmation screen to check whether any such object in the detection range is being incorrectly detected as a face.

• Face Detection can be less effective on darker complexions and in darker environments.

• Face Detection can be enhanced by making sure your face is clearly visible and evenly lit. If the room is dark, Face Detection can be enhanced by making sure the room is brightly lit. If the lighting environment creates a shadow on your face, Face Detection can be enhanced by adjusting the lighting to prevent shadows.

Personal Identification Function

• The Personal Identification Function is part of the Face Detection Function. The factors affecting the Face Detection Function set out above also apply to the Personal Identification Function.

• Personal Identification may in addition be affected by: – A different shadow pattern from that when your face was

registered. Personal Identification accuracy can be enhanced by registering additional facial images under different conditions.

– A different lighting environment from when your face was

registered, such as during the day and at night. Personal Identification accuracy can be enhanced by registering your face under various lighting environments.

– Whether or not you are wearing glasses. If you wear

glasses, we recommend that you register your face both with and without glasses.

– A different facial expression. Personal Identification accuracy

can be enhanced by registering different facial expressions.

• Personal Identification may be affected when faces have similar characteristics (e.g. brothers, sisters, twins).

• Personal Identification is less effective on the faces of young children.

Face Registration Function

• Up to four people can be registered under the Personal Identification Function. The same person cannot be registered twice.

• A maximum of 10 different facial images per person can be registered. Personal identification accuracy can be enhanced by registering different facial images as set out above.

• It is advisable to register your face in your usual viewing position and with your natural facial expression. Registering your face too near to or too far from the screen may hinder identification performance.

About the Camera Sensor (for UL86 Series)

29° 29°

Personal Identication (50 ~ 400cm)

Face Detection (50 ~ 500cm)

27°

7°

Face Detection (50 ~ 500c

Personal Identication (50 ~ 400cm)

INSTALLING YOUR TV

English

The remote control

CT-90369 (for SL86 series)

1 For On/Standby mode

2 To select external input sources

3 To select TV Mode

4 Selectable Picture preferences

5 Widescreen viewing

s Stereo/bilingual transmissions

7 Digital Subtitles or Analogue TEXT Subtitle pages if available

8 Number buttons

9 Switch the Audio Description On/Off

10 To return to previous programme position

11 To alter the TV volume

12 To display on-screen information

To access the index page in Text mode

13 To mute the TV sound

14 To access Quick Menu

15 To change programme positions

To change TEXT pages

16 To access “TOSHIBA PLACES” Top Page

When network is not connected, an error message will be displayed.

17 To access Media Player Menu

18 To call up text services

19 To access the analogue or digital Channel List

20 On-screen Menus

21 To display the digital on-screen Programme Guide

22 To page up, down, left or right

23 When using menus, the arrows move the cursor on the screen

up, down, left or right. Press OK to confirm your selection

24 To return to previous Menu

25 To exit menus

27 Colour buttons: Text and interactive service control buttons

Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the proper way. Suitable battery types for this remote are AA, IEC R6 1.5V.

Do not combine a used, old

battery with a new one or mix battery types. Remove dead batteries immediately to prevent acid from leaking into the battery compartment. Dispose of them in accordance with instructions on page 95 of this manual.

Warning: Batteries must not be exposed to excessive heat such as sunshine, fire or the like.

The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the television. If the operating range becomes reduced, the batteries may need replacing.

1 2

5 4

14 19

3 6

26 When in TV mode:

r Picture still D Analogue time

display

When in Text mode:

A To reveal concealed

text

B To hold a wanted

page

C To enlarge text

display size

D To select a page

while viewing a normal picture

When using Programme Guide:

Z –24 hours z +24 hours CC –1 page cc +1 page

During Playback:

To PLAY

v To STOP W/w To PAUSE/STEP Z To SKIP-BACK CC To REWIND cc To FAST FORWARD z To SKIP-FORWARD

Inserting batteries and effective range

INSTALLING YOUR TV

English

The remote control

CT-90382 (for UL86 series)

1 For On/Standby mode

2 To select external input sources

3 To select TV Mode

4 To access Quick Menu

5 To access the “TOSHIBA PLACES” Top Page

When network is not connected, an error message will be displayed.

6 To access the analogue or digital Channel List

7 To alter the TV volume

8 Switch the Audio Description On/Off

9 To mute the TV sound

10 To change programme positions

To change TEXT pages

11 On-screen Menus

12 To display the digital on-screen Programme Guide

13 When using menus, the arrows move the cursor on the

screen up, down, left or right

14 Press OK to confirm your selection

15 To return to previous Menu

16 To exit menus

17 Colour buttons: Text and interactive service control

buttons

18 Number buttons

19 To display on-screen information

To access the index page in Text mode

20 To return to previous programme position

22 To record DTV programmes

23 To call up text services

24 Picture still

25 To access Media Player Menu

26 Selectable Picture preferences

27 Widescreen viewing

s Stereo/bilingual transmissions

29 To access More Information Menu

30 Digital Subtitles or Analogue TEXT Subtitle pages if

available

Remove the back cover to reveal the battery compa rtment and make sure the batteries are inserted the proper way. Suitable battery types for this remote are AAA, IEC R03 1.5V.

Do not combine a used, old battery with a new one or mix battery types. Remove dead

batteries immediately to prevent acid from leaking into the battery compartment. Dispose of them in accordance with instructions on page 95 of this manual.

Warning: Batteries must not be exposed to excessive heat such as sunshine, fire or the like.

26 27

21 When in TV mode:

D Analogue time

display

When in Text mode:

A To reveal concealed

text

B To hold a wanted

page

C To enlarge text

display size

D To select a page

while viewing a normal picture

When using Programme Guide:

Z –24 hours z +24 hours CC –1 page cc +1 page

During Playback:

To PLAY

v To STOP W/w To PAUSE/STEP Z To SKIP-BACK CC To REWIND cc To FAST FORWARD z To SKIP-FORWARD

Inserting batteries and effective range

English

CONNECTING YOUR TV

Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket.

Aerial cables: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connect the aerial to the socket on the rear of the television. If you use a decoder and/or a media recorder, it is essential that the aerial cable is connected through the decoder and/or through the media recorder to the television.

Satellite cable: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connect the LNB from the satellite dish to the SATELLITE ANTENNA socket on the TV. You can receive TV, radio, interactive TV, and HD TV with clear reception.

SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connect the media recorder IN/OUT socket to the television. Connect the decoder TV socket to the television.

Before running Auto Tuning, put your decoder and media recorder to Standby.

The phono sockets alongside the COMPONENT VIDEO INPUT sockets will accept L and R audio signals.

The Digital Audio Output socket enables the connection of a suitable surround sound system.

NOTE: This output is always active.

HDMI® (High-Definition Multimedia Interface) is for use with a DVD decoder or electrical equipment with digital audio and video output. For acceptable video or PC signal formats through the HDMI terminals, see page 97.

PC format signals will also be displayed.

NOTE: Although this television is able to connect to HDMI equipment, it is possible that some equipment may not operate correctly.

LAN port is used to connect the TV to your home network. This TV can play digital content stored on a DLNA CERTIFIED™ product with server function.

A wide variety of external equipment can be connected to the back of the television; therefore, the relevant owner’s manuals for all additional equipment must be referred to for exact instructions.

If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button. To recall external equipment, press

o to select between DTV, EXT 1, EXT 2,

EXT 3, HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC or ATV.

When the external input mode is selected while viewing DTV mode, the SCART socket does not output video/audio signals.

Satellite dish

LAN port

SCART (EXT 1)

DIGITAL AUDIO OUT PUT

(OPTICAL)

PC/HDMI 3 AUDIO INPUT (shared)

HDMI 4 INPUT

HEADPHONE jack

VIDEO/AUDIO INPUT (EXT 3)

HDMI 1/2/3 INPUTS

COMPONENT VIDEO INPUT (EXT 2)

RGB/PC INPUT

Media Recorder

Aerial Cable

Power cord

ILLUSTRATION SHOWS 42UL863.

“F-type”

CONNECTING YOUR TV

English

Connecting an HDMI® or DVI device to the HDMI input

The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.

This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant

[1]

consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output). For acceptable video signal formats, see page 97.

NOTE:

• Some early HDMI equipment may not work properly with

your latest HDMI TV, due to the adoption of a new standard. Please unplug your HDMI cable first and then try setting the INSTAPORT™ and Enable Content Type options to “Off”. Your early HDMI source should operate properly with your television. See page 83.

• Supported Audio format: Linear PCM, Dolby Digital (AC-3),

sampling rate 32/44.1/48kHz.

Connect an HDMI cable (type A connector) to the HDMI terminal.

For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo ( ).

• If your HDMI connection is capable of 1080p and/or your

television is capable of refresh rates greater than 50Hz, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly with this model.

• HDMI cable transfers both video and audio. Separate

analogue audio cables are not required (see illustration).

• See “HDMI 3 Audio” on page 82.

To view the HDMI device video, press the

o button to select

HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.

Connect an HDMI-to-DVI adaptor cable (HDMI type A connector) to the HDMI 3 terminal and audio cables to the PC/ HDMI 3 (AUDIO) socket (see illustration).

• The recommended HDMI-to-DVI adaptor cable length is

6.6 ft (2m).

• An HDMI-to-DVI adaptor cable transfers video only. Separate analogue audio cables are required.

• See “HDMI 3 Audio” on page 82.

NOTE:

To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:

• When turning on your electronic components, turn on the television first, and then the HDMI or DVI device.

• When turning off your electronic components, turn off the HDMI or DVI device first, and then the television.

This feature enables the audio signal of the TV to be sent to the AV amplifier via the HDMI cable. It will not be necessary to connect a cable from the audio output of the TV to the audio input of the AV amplifier to reproduce the audio received from the tuner of the TV through the AV amplifier.

To connect an HDMI device

HDMI cable

HDMI device

the back of your television

To connect a DVI device

HDMI’s ARC (Audio Return Channel)

feature

Audio cable for HDMI to television connection (not supplied)

HDMI-to- DVI adaptor Cable

DVI device

the back of your television

AV amplier that supports ARC

HDMI cable

the back of your television

CONNECTING YOUR TV

English

REGZA-LINK connection

You can control the basic functions of connected audio/video devices using the television’s remote control if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup and operations, see pages 86–88.

For the setup shown above, you will need three HDMI cables.

NOTE:

• If several devices are connected, the REGZA-LINK feature may not operate properly.

• For proper operation, it is recommended that you use HDMI cables with the HDMI Logo ( ).

• This function is available when one PC and one AV amplifier are connected separately. However, it may not operate properly if the PC is connected via the AV amplifier.

Before controlling the device(s):

• After completing the above connections, set the REGZALINK Setup menu as you desire (see page 86).

• The connected devices must also be set. For details, see the operation manual for each device.

• The REGZA-LINK feature uses CEC technology as regulated by the HDMI standard.

• This feature is limited to models incorporating Toshiba’s REGZA-LINK. However, Toshiba is not liable for those operations. Refer to individual instruction manuals for compatibility information.

AV amplier Playback device

Playback device

the back of your television

CONNECTING YOUR TV

English

Connecting a computer

With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the television’s speakers.

When connecting a PC to the RGB/PC terminal on the television, use an analogue RGB (15-pin) computer cable and a PC audio cable for the PC/HDMI 3 (AUDIO) socket. Select PC from the PC/HDMI 3 Audio options in the AV Connection menu located in the Setup menu.

To use a PC, set the monitor output resolution on the PC before connecting it to the television. For acceptable PC signal formats, see page 96.

To display the optimum picture, use the PC setting feature (see page 80).

NOTE:

• The PC audio input terminal on the television is shared with the HDMI 3 analogue audio input terminal (see page 82).

• Some PC models cannot be connected to this television.

• An adaptor is not needed for computers with a compatible mini D-sub15-pin terminal.

• Depending on the DVD’s title and the specifications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during multi-angle scenes.

• A ba nd may appe ar at the ed ges of th e scr een o r par ts of the picture may be obscured. This is due to scaling of the picture by the set, it is not a malfunction.

• When PC input mode is selected, some of the television’s features will be unavailable e.g. Colour System in the Setup/System Setup menu.

• Some PC models may output unique signals that the television may be unable to detect (see page 96).

When connecting a PC to the HDMI terminal on the television, use an HDMI-to-DVI adaptor cable and an analogue audio cable.

If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). A separate analogue cable is not necessary.

For acceptable PC and video signal formats, see page 97.

NOTE:

• The edges of the images may be hidden.

• If connecting a certain PC model with a unique PC signal, the PC signal may not be detected correctly.

To connect a PC to the RGB/PC terminal

the back of your television

Audio cable for PC to television connection (not supplied)

Conversion adaptor if required (not supplied)

Computer

RGB PC cable (not

supplied)

Mini D-sub 15 pin connector

To connect a PC to the HDMI terminal

Audio cable for PC to television

connection (not supplied)

HDMI-to-DVI

adaptor cable

the back of your television

Computer

CONNECTING YOUR TV

English

Connecting a home network

The LAN port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to access photo, video and audio files that are stored on a DL NA CERT IFIED ™ serv er and p lay/d ispla y them on your TV.

NOTE:

• If you connect to a shared network outside your home, it is advisable to use a router. Always use DLNA CERTIFIED™ products in private network environments.

• If you use a hub or switch to connect the TV to your home network, you may not be able to use the automatic setup and will have to manually set up the network address. See page 46.

• If you use a router with built-in DHCP functionality, use the automatic setup. Manual setup may not work.

• If you connect the TV and PC directly, use a crossover LAN cable.

[1] Coaxial or telephone cable (depending on your modem type)

[2] Standard LAN cable

[3] Do NOT connect a phone jack directly to the TV’s LAN port.

Please refer to “Wireless Setup” section on page 43.

NOTE: UL86 is the adaptor built-in.

To connect the TV to a home network -

Wired

Modem (if available)

Server PC

Router with Hub

the back of your television

Cable or Phone jack

[1] [2]

[2]

[3][2]

To connect the TV to a home network

with an internet connection - Wireless

Access point (AP)

Wireless LAN router

Modem

TOSHIBA Dual Band WLAN adaptor (for SL86 series)

the back of your television

Computer

CONNECTING YOUR TV

English

Setting up the USB HDD (for UL86 series)

To connect an USB HDD (not supplied)

NOTE: For available USB HDD information, see "Product Information" on the website.

To register an USB HDD

When you connect a new USB HDD to the USB 2 port on the TV, the following screen will appear.

a Press C or c to select Yes and press OK.

The formatting confirmation window will appear.

b Press C or c to select Yes and press OK.

Registration will start.

c If you want to name the USB HDD, press C or c to

select Yes and press OK.

See page 47 to input characters.

The maximum number of characters is 10.

If you prefer the default name ”USB HDD X,” select No and press OK.

d The Device List will appear.

You can now use registered HDDs.

While in the list mode, The following key operations are available:

OK button .................To register/remove

RED button............... To disconnect

GREEN button ......... To change Device Name

YELLOW button ...... To test

BLUE button............. To format

NOTE:

• To disconnect a USB HDD from the TV, follow the procedures for “Removing the Device” in “Setting a USB HDD,” including unregistered devices.

• When using a USB HDD, if necessary, perform the settings and operations shown in “Setting a USB HDD” (see page xx).

• Connect the USB HDD to the USB 2 port. Recording and playback cannot be performed if connected to the USB 1 port.

• Up to 8 USB hard disks can be registered to this TV.

• Recorded programs saved on the USB HDD can only be viewed on this TV. They cannot be viewed when connected to another TV (including the same model of TV), a PC, or other device.

• You cannot connect a USB HDD to the TV via a USB hub.

• If an HDD is re-registered, it will not be formatted.

• When the USB HDD is formatted, all the data stored on the HDD will be deleted.

USB2

USB cable (not supplied)

USB HDD

An unregistered USB HDD has been detected. Register the USB HDD?

Yes

Device Name

Registered

Connected USB HDD 1

USB HDD 2

USB HDD 3

Device List

CONNECTING YOUR TV

English

Controls and input connections

A wide variety of external equipment can be connected to the input sockets on the side of the television.

While all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.

If the RED LED is not lit, check that the mains plug is connected to the power supply and press

1 on the remote

control; it may take a few moments. The GREEN LED will be lit.

To put the television into Standby, press

1 on the remote

control. To view the television, press

1 again. The picture may

take a few seconds to appear.

Press MENU on the remote control to display the menu.

The five initial topics icons will appear. As each symbol is selected by pressing

C or c on the remote control. Press

BbC c to enter a sub menu and then enter a further sub

menu to see any options.

NOTE: The same menu is displayed in DTV (Digital TV) and ATV (Analogue TV) modes; however, where some items are not available in a mode, they will appear greyed out.

To use the option, press

B and b on the remote control to

move up and down and press

C or c to select your desired

setting. Follow the on-screen instructions. The functions of each menu are described in detail throughout the manual.

To alter the volume gently touch –

2 +.

To alter the programme position touch

b p B.

Touch MENU and

b p B , – 2 + to control the sound and

picture options. Touch MENU to finish. The Media Player feature provides access to photo, movie and

music files stored on an USB storage device that is connected via the USB 1 or USB 2 port or on a network device.

NOTE: The USB socket has limited functionality and Toshiba can take no responsibility for damage to other connected equipment.

For SL86 series, the USB 2 socket has to be used with the “TOSHIBA Dual Band WLAN Adaptor WLM-10U2” in order to access a wireless network.

This feature is available only when the “TOSHIBA Dual Band WLAN Adaptor“ is used.

To select an external input, touch

o until the appropriate

input source is selected.

Please always refer to the owner’s manual of the equipment to be connected for full details.

NOTE: Interactive video games that involve shooting a “gun” at an on-screen target may not work with this TV.

ILLUSTRATION SHOWS 42UL863.

COMMON INTERFACE The Common Interface is for a Conditional Access Module (CAM). Contact a service provider. The software updating of CI Plus CAM may be automatically executed. At this time, your Recording/Reminder programming will be canceled.

Ambient Light Sensor

Camera Sensor

RED LED – Standby GREEN LED – Power on

ORANGE LED – Programme timer set (digital only) RED LED – Programme timer Active (digital only)

USB 1 port Media Player

USB 2 port Media Player/ WLAN adaptor ready for a home network (SL86 series) WLAN adaptor built-in (UL86 series) USB HDD connection ready (UL86 series)

Control panel (touch sensor)

Switching on

For energy saving:

We recommend that you use the television with the factory settings. The factory settings are for energy saving. Unplugging the mains plug will cut energy use to zero for all televisions. This is recommended when the television is not being used for a long time, e.g. when on holiday. Reducing the brightness of the screen will reduce energy use. Energy efficiency cuts energy consumption and thus saves money by reducing electricity bills.

NOTE: Putting the television into standby mode will reduce energy consumption, but will still draw some power.

Using the remote control

Using the controls and connections

CONNECTING YOUR TV

English

MENU structure

To open the main menu (illustration bel ow) , press MENU on the remote control or on the TV control panel.

1st Layer 2nd Layer 3rd Layer

Press MENU. Press

C c / B. Press C c.Press OK. Press BbC c.

TV Programmes

Guide Genre Search Programme Timers Library

Jump to Programme Guide (EPG) Jump to Genre Search Jump to Programme Timers Jump to Library (for UL86 only)

Media Player

Photo Movie Music Media Player Setup

Device Select or Photo Viewer Device Select or Movie Viewer Device Select or Music Viewer Media Player Setup Menu

Connected TV

Toshiba Places BBC iPlayer YouTube

Jump to Toshiba Places Jump to BBC iPlayer Jump to YouTube

Function

Photo Frame On Timer Sleep Timer

Jump to Photo Frame On Timer Menu Sleep Timer Menu

Setup

Picture Sound Preferences System Setup

Picture Menu Sound Menu Preferences Menu System Setup Menu

TV Programmes

Media Player

Connected TV

Setup

Function

Programme

Timers

Genre Search

Library

Guide

English

SETTING UP YOUR TV

Startup Application

Before switching on the television, set your decoder and media recorder, if applicable, to Standby. To set up the television, use the buttons on the remote control as detailed on page 8, 9.

a Press the 1 button. The Menu Language screen will

appear. This screen will appear the first time that the television is switched on and each time Reset TV is selected.

b Press B b C c to select the menu language and

press OK.

c Highlight Country and press C or c to select. The

television is now set to tune the stations for your country.

NOTE:

• The following display menus will differ slightly according to the country you selected.

• If there is not a country that you want to select in the list, select Others.

d Press OK, and the Location screen will appear.

e Press C or c to select Home or Store. For normal

home use, select Home.

f Press OK, and the TV Mounting screen will appear,

press

C or c to select Stand or Wall.

g Press OK, and the AutoView screen will appear, press

C or c to select Yes or No.

h Press OK. If the Ant/Cable/Satellite screen appears,

press

B or b to select Antenna, Cable or Satellite

and then press OK to check ( ).

If DVB-C is not supported in your area, Cable will not be displayed.

• When you select Antenna or Cable, follow steps 10 to 13.

• When you select Satellite, skip to step 14.

• When you select Antenna (or Cable) and Satellite, the Satellite Settings startup screen will appear automatically after completing the Antenna (or Cable) scan and pressing OK.

i Select Next and press OK. The Auto Tuning start up

screen will appear with the option to select between DTV and ATV, DTV or ATV if available. Use

C or c to

select the appropriate mode.

j Press b or B to highlight Start Scan, and then press

OK.

The television will start to search for available DTV and/or ATV channels. The progress bar will indicate the scan status.

You must allow the television to complete the search.

When the search is complete, the television will automatically select position one.

The Auto Tuning screen will display the total number of services found.

NOTE: If there are multiple channels with the same channel number, a confirmation window will appear. Press

C or c to select the one you prefer.

Quick Setup

Country

English

Primary Subtitle Language

English

Secondary Subtitle Language

Primary Audio Language

Secondary Audio Language

Location

Home

To use the TV for displaying in a store showroom, please select [Store]. [Home] mode is recommended for normal use.

TV Mounting

Stand

If you are mounting the TV on a wall please select [Wall]. [Stand] is recommended for other uses. This setting may be modified later under Sound Navi in the SOUND menu.

AutoView

AutoView mode automatically adjusts picture settings to suit ambient light conditions. Do you wish to enable AutoView mode?

Ant/Cable/Satellite

Satellite

Cable

Antenna

Auto Tuning

Progress Found

ATV Tune Waiting...

Channel: C7

DTV Tune 3% 2

SETTING UP YOUR TV

English

k Press C or c to view the DTV (digital channel) or ATV

(analogue channel) lists.

l Use b or B to move through the list to select a

channel, and then press OK to view.

In ATV mode, some areas may receive duplicate stations. There may not be a clear picture or the signal may be weak, so the station order can be changed using ATV Manual Tuning.

REMEMBER: Press TV at any time to select between ATV and DTV (DTV Ant TV/Radio/Text, DTV Cable TV/

Radio/Text, DTV Sat TV/Radio/Text if available) modes.

NOTE: The time will be set automatically by transmission but can be advanced or decreased by using Local Time Setting in the DTV Settings screen.

m Select Next and press OK. The Satellite Settings

screen will appear. From this window, you can add the satellites that you wish to tune and configure detailed settings for each one individually. See “Satellite settings” on page 20.

Highlight Done and press OK.

n If your satellite dish is movable, the following

Positioning screen will appear.

Press

B or b to highlight Positioning, and then press

C or c to find the dish position with the strongest

signal level.

Press

B or b to highlight Store Position and press

OK to store the dish position. Repeat steps 14 and 15

for the next satellite as necessary.

If your satellite dish is not movable, the Positioning screen will not appear.

Adjust the dish position manually for the maximum Signal Level strength.

Highlight Done and press OK.

o If the reception testing completes successfully, the

Auto Tuning startup screen will display.

You can select Scan Option from Free to Air and All.

p Press B or b to highlight Start Scan, and then press

OK.

The television will start to search for available DVB-S channels. The progress bar will indicate the scan status.

When the search is complete, the Auto Tuning results screen will display the total number of services found.

q Use B or b to move through the list to select a

channel, and then press OK to view.

From this menu, you can set the RF input configuration.

a Press MENU / C c to highlight Setup icon.

b Press B / C c to highlight System Setup icon.

c Press OK to display System Setup menu.

d Press B or b to select Ant/Cable/Satellite and press

C or c to select Antenna, Cable or Satellite.

NOTE: When you attempt to change the Ant/Cable/ Satellite setting, a warning message will appear

followed by PIN entry (if PIN has been set) and a prompt for Auto Tuning.

SatelliteNo. Dish LNB

ASTRA 19.2˚E

Satellite Settings

Transponder : 1/83 (10743 MHz) Dish Type : Fixed Lower LOF (MHz) : 9600 Upper LOF (MHz) : 10600

Switch Type

None

LNB Power

Done

Positioning

Signal Level 30%

Go to Stored Position

Store Position

Transponder

1/83 (10743 MHz H)

Positioning

Go to 0

Satellite : ASTRA 19.2°E

Step Size

PLEASE NOTE

The Quick Setup menu can also be accessed at any time from the Setup/System Setup menu.

Ant/Cable/Satellite (if available)

Auto Tuning - Satellite

Start Scan

Satellite

Free to Air

ASTRA(19.2°E)

Scan Option

SETTING UP YOUR TV

English

e When Ant/Cable/Satellite is set to Cable, the

following setting options will be provided in the Auto Tuning screen.

Press

B or b to select an item, and then press C or c

to select your desired option.

With the exception of DTV Scan Type and DTV Modulation items, all of the following items will have 2 operating modes. The first is Auto where the values for each item are preset by the system. The second is an Input mode where you will be able to enter a single value in place of the pre-set value. If no channel is currently tuned and the Input state is chosen, a system default value will be shown. However, if a channel is currently tuned when the item is accessed, the value of the current channel will be displayed.

DTV Scan Type:

This item determines whether a Quick Scan or a Full Scan will be executed. The Quick Scan is a simplified version of the Full Scan that is designed to complete in less time.

DTV Start Frequency:

This sets the frequency from which the scan will begin.

DTV End Frequency:

This sets the frequency at which the scan will end.

DTV Modulation:

You can choose from five QAM modulation settings.

DTV Symbol Rate:

This is the baud rate (KS/s) of the scan.

DTV Network ID:

This is the Network ID to be utilized for the scan. This item is greyed out when DTV Scan Type is set to “Full Scan”.

From the System Setup menu, you can add the satellites that you

wish to tune and configure detailed settings for each one

individually.

To add a satellite:

a Press MENU / C c to highlight Setup icon.

b Press B / C c to highlight System Setup icon.

c Press OK to display System Setup menu.

d Press B or b to select Satellite Settings and press

OK.

e Press b to highlight a new line to add an another

satellite and press OK.

f Press b until the required satellite is displayed and

press OK.

To delete a satellite:

a In the Satellite Settings menu, press B or b to select

the satellite you want to delete.

b Press the RED button. A confirmation window will

appear.

c Press C or c to select Yes and press OK.

NOTE: It is not possible to delete position No.1.

Auto Tuning

DTV and ATVTuning Mode

DTV

Quick ScanScan Type

AutoStart Frequency

AutoEnd Frequency

AutoModulation

AutoSymbol Rate

AutoNetwork ID

Start Scan

Satellite Settings

SatelliteNo. Dish LNB

ASTRA 19.2˚E

Satellite Settings

Transponder : 1/83 (10743 MHz) Dish Type : Fixed Lower LOF (MHz) : 9600 Upper LOF (MHz) : 10600

Switch Type

None

LNB Power

Done

SETTING UP YOUR TV

English

To edit the satellite settings:

a In the Satellite Settings menu, press B to highlight

Switch Type.

b Press C or c to select None, ToneBurst, DiSEqC

2way or DiSEqC 4way as your satellite switch type.

c Press b to highlight LNB Power and press C or c to

select On or Off.

To add a transponder:

a In the Satellite Settings menu, press B or b to

highlight the line you want to edit and press OK.

b Press the GREEN button. The Transponder Settings

screen will appear.

c Press B to highlight a new line.

Press OK.

Edit each parameter as required and press OK. See

page 21

To delete a transponder:

a In the Transponder Settings menu, press B or b to

highlight the line you want to delete.

b Press the RED button.

To edit the Transponder Settings:

a In the Transponder Settings menu, press B or b to

highlight the line you want to edit and press OK.

b Press C or c to select Frequency, Polarisation,

Symbol Rate or S/S2, and set the item using the

number buttons if necessary.

c Press OK to save your settings.

d Repeat steps 1 through 3 for other lines.

e Press BLUE to finish editing and return to Satellite

Settings.

Press GREEN to cancel any edits that were made this time.

Press YELLOW to reset all transponder settings to their initial default settings.

To select the Dish Type:

a In the Satellite Settings menu, press B or b to select

the required satellite line, and then press OK.

b Press C or c to highlight Dish and press the GREEN

button.

c Press C or c to select Dish Type. You can select

Movable or Fixed as the Dish Type.

ASTRA 19.2˚E

111

Transponder Settings

1 10743 H

Frequency Polarisation Symbol Rate S/S2

7 10861

8 10876

2 10773

3 10788

4 10817

5 10832

6 10847

22000

Transponder Settings

76 12640 V

Frequency Polarisation Symbol Rate S/S2

82 12728

77 12662

78 12669

79 12692

80 12699

81 12721

22000

83 0 H0S

83 12731 H 22000 S2

Dish Settings

Dish Type

Fixed

Dish : 1

SETTING UP YOUR TV

English

To select the LNB Settings:

a In the Satellite Settings menu, press B or b to select

the required satellite line, and then press OK.

b Press C or c to highlight LNB and press the GREEN

button.

c Press B or b to select Lower LOF or Upper LOF and

input the appropriate frequencies.

NOTE: As new services are broadcast, it will be necessary to re-tune the television in order to view them.

Auto Tuning will completely re-tune the television and can be used to update the channel list. It is recommended that Auto

Tuning is run periodically to ensure that all new services are

added. All current channels and settings, i.e. locked channels,

will be lost.

a Press MENU / C c to highlight Setup icon.

b Press B / C c to highlight System Setup icon.

c Press OK to display System Setup menu.

d Press B or b to select Auto Tuning and press OK.

e For DTV/ATV Tuning:

A screen will appear warning that previous programmes and settings will be deleted.

Press

C or c to select DTV and ATV, DTV or ATV, if

available, then highlight Start Scan and press OK to continue with the Auto Tuning.

NOTE: If you have selected “Others” for the Country field in the System Setup menu, and selected a tuning mode other than “DTV” , choose the optimum ATV broadcasting system (B/G, I, D/K or L).

The television will start to search for all available DTV and/or ATV services.

You must allow the television to complete the search.

When the search is complete, the Auto Tuning screen will display the services found.

For Satellite Tuning:

A screen will appear warning that previous programmes and settings will be deleted.

Press B or b to highlight Satellite and then press C or c to select the desired satellite (No.1 Sat ~ No.4 Sat or All).

You can select Free to Air or All as the Search Option. Highlight Start Scan and press OK to continue with the Auto Tuning.

When the search is complete, the Auto Tuning screen will display the services found.

f Use b or B to move through the list to select a

channel, and then press OK to view.

Auto Tuning

LNB Settings

Lower LOF

9750

LNB : 1

Upper LOF

10600

System Setup

Menu Language

English

Country

Ant/Cable/Satellite

Auto Tuning

ATV Manual Tuning

DTV Settings

DTV Manual Tuning

Satellite Settings

Germany

Auto Tuning

DTV and ATVTuning Mode

Start Scan

Previous settings will be lost! Press EXIT for no change.

Auto Tuning

Previous settings will be lost! Press EXIT for no change.

AllSatellite

Free to AirSearch Option

Start Scan

SETTING UP YOUR TV

English

ATV Manual Tuning

The television can be tuned-in manually using ATV Manual

Tuning. For example, you might use the feature if the television

cannot be connected to a media recorder/decoder with a SCART

lead or when you want to tune-in a station on another System.

Use

C and c to move across the screen and select any of the

ATV Manual Tuning options. Then use

B or b to adjust the

settings.

1 Position

The number to be pressed on the remote control to tune the channel.

2 System

Specific to certain areas.

3 Colour System

Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from external source.

4 Skip

Set Skip to On (

8) or Off (() for the selected channel.

See page 24.

5 Signal Class

The channel classification.

6 Channel

The channel number on which a station is being broadcast.

7 Search

Search up and down for a signal.

8 Manual Fine Tuning

Only used if interference/weak signal is experienced. See page 91.

9 Station

Station identification. Use the

B b and C c buttons to

enter up to seven characters.

To allocate a position on the television for a decoder and media recorder: turn the decoder on, insert a pre-recorded film in the media recorder, press PLAY, and then manually tune.

a In the System Setup menu, press b to highlight ATV

Manual Tuning and press OK.

b Use B or b to highlight the desired position. We

suggest Pos. 0 for a media recorder.

c Press OK to select. If the channel chosen for the media

recorder is set to skip, Skip should be removed before storing.

d Press c to select System and use B or b to change if

required.

e Then press c to select Search.

f Press B or b to begin the search. The search symbol

will flash.

Tuning

ATV Manual Tuning

System

1 A C 2 0 V C R

123 4 65 7 8 9

Different Channel numbers may be displayed.

System Setup

Menu Language

English

Country

Ant/Cable/Satellite

Auto Tuning

ATV Manual Tuning

DTV Settings

DTV Manual Tuning

Satellite Settings

Germany

Pos. Channel Station

ATV Manual Tuning

S10

S40

C22

C25

C28

C30

ATV Manual Tuning

System

1 A C 2 0

ATV Manual Tuning

1 C 2 0 IA

SETTING UP YOUR TV

English

g Each signal will show on the television. If it is not your

media recorder, press

B or b again to restart the

search.

h When your media recorder signal is found, press c to

move along to Station. Use

B, b, C and c to put in

the required characters, e.g. VCR.

i Press OK to save.

j Repeat for each position you want to tune, or press

BACK to return to the list of channels and select the next number to tune.

k Press EXIT when you have finished.

To prevent certain channels from being viewed, positions can be

skipped.

a Select ATV Manual Tuning from the System Setup

menu.

b Use B or b to highlight the position to be skipped

and press OK to select.

c Press c to select Skip.

d Use B or b to turn Skip on.

Press OK.

8 on the screen indicates a skipped position.

e Press BACK and repeat from Step 2 or press EXIT.

Each position has to be individually selected. To turn Skip off, repeat the procedure for each position.

Skipped positions cannot be selected by P

U and Pu

or by the controls on the television but can still be accessed by the number buttons on the remote control.

Channels may be moved and saved to the position of your

choice.

a Select ATV Manual Tuning from the System Setup

menu.

b With the list of channels showing, use B or b to

highlight the channel you want to move and press

c Use B or b to move through the list to your preferred

position. As you do so, the other channels will move to make room.

d Press C to save your move.

Repeat as necessary, and then press EXIT.

PLEASE NOTE

This television has direct channel entry if the channel numbers are known. Select the ATV Manual Tuning screen in Step 3. Enter the Position number, the System, then C for standard (terrestrial) channels or S for cable channels and the Channel number. Press OK to save.

Skip

ATV Manual Tuning

Station

1 A C 2 0 V C R I

Pos. Channel Station

ATV Manual Tuning

S10

S40 ABC1

ABC1C22

C25

C28

C30

Sorting positions

ATV Manual Tuning

Skip: On

1 A C 2 0 I

Pos. Channel Station

ATV Manual Tuning

S10 C7

C40

C22

C25 C28

C30

ABC1

SETTING UP YOUR TV

English

DTV Manual Tuning

NOTE: The content of this menu varies depending on the DTV

input (Antenna, Cable, or Satellite) that is currently selected.

This feature is available for service engineers or can be used for

direct channel entry if the multiplex channel is known.

a Select DTV Manual Tuning from the System Setup

menu and press OK.

b Enter the multiplex number using the number

buttons or use

C or c to adjust the number up or

down.

c Highlight Start Scan, and then press OK. The

television will automatically search for that multiplex.

When the multiplex is found, any channels that are not currently in the channel list will be added and the channel information at the top of the screen will be updated.

d Repeat as necessary. Press EXIT to finish.

When Ant/Cable/Satellite is set to Cable, DTV Manual Tuning items are as follows:

Frequency – input a specific frequency to be scanned

Modulation – choose from one of five QAM modulation

options

Symbol Rate – input a specific baud rate (KS/s) to be used for the manual scan

Highlight Start Scan, and then press OK.

When Ant/Cable/Satellite is set to Satellite, DTV Manual Tuning items are as follows:

Use

B or b to highlight an item (Satellite, Transponder,

Frequency, Symbol Rate, Polarisation or Search Option),

and then press

C or c to select the required option.

Highlight Start Scan, and then press OK.

Manual Tuning

DTV Manual Tuning

WEAK

Signal Strength Quality

Channel

GOOD

Start Scan

STRONGAVERAGE

Pos.New TypeName

ABC ONE

0 New Channels - Total 6

ABC TWO

ABC THREE

ABC NEWS 24

DTV Manual Tuning

ABCi

Manual Tuning for DVB-C

Manual Tuning for DVB-S

DTV Manual Tuning - Satellite

WEAK

Signal Strength Quality

Satellite

POOR

Start Scan

STRONGAVERAGE

ASTRA 28.2°E

Transponder

1/83

Frequency

10714 MHz

Symbol Rate

22000 KS/s

Polarisation

Search Option

Free to Air

SETTING UP YOUR TV

English

DTV Settings

The channel order may be changed to suit your personal

preference.

a Select DTV Settings from the System Setup menu

and press OK.

b Select Channels and press OK.

c Fo r your conve nienc e, y ou ca n ju mp to s pec ific pla ces

in the list by one of two methods.

Line Number Jump —Use the number buttons

(0-9) to input the line number you want to select, and then press OK.

Name Jump —Press CC or cc to jump to the

next station name with a different initial letter.

It is also possible to change the Position number of a particular channel.

Renumber — Press the RED button to renumber

the highlighted channel. Edit the channel number using the number buttons and press OK. If the position number you input already exists, a confirmation window will appear.

Move — Press the GREEN button to activate the

Move feature. Use the

B or b buttons to select the

channel you wish to move and press OK to check. If you wish to move multiple channels at once, select another channel and check in the same way. Repeat as necessary. Once all desired channels have been checked, use the

B or b buttons to place the focus at the position to

which you wish to move the channels. The channels will be inserted above the highlighted channel. Press the GREEN button to execute the move.

Sort — Press the YELLOW button. A confirmation

window will appear. Press

C or c to select Yes and

press OK.

The Sorting Type selection window will appear.

Press

C or c to set the sorting type.

A-Z Sort Station name order (A to Z)

Number Position No. order (numerical sequence)

Press

b to highlight Sort and press OK.

Channels (Antenna/Cable)

DTV Settings

Channels

Parental PIN Setup

Subtitle and Audio

Parental Control

Local Time Setting

DVB Character Set

Dynamic Scan

Standby Channel Update

Standard

Off

Channels Line No. 1/10

1 ABC ONE

2 ABC TWO

Pos. Name

7 ABC THREE

30 CABC Channel

40 ABC NEWS 24

51 ABCi

822 AA

823 AC

ABC ONE

Pos.

----

Name

Channels Line No. 1/10

1 ABC ONE

Pos. Name

822 AA

823 AC

2 ABC TWO

7 ABC THREE

30 CABC Channel

40 ABC NEWS 24

51 ABCi

Sort Your existing channel order will be lost. Do you wish to

continue?

Yes

Sorting Type Number

Sort

SETTING UP YOUR TV

English

a Select DTV Settings from the System Setup menu

and press OK.

b Select Channels and press OK.

The satellite channel list will appear.

c For your convenience, you can edit and sort your

channel list.

Line Number Jump —Use the number buttons

(0-9) to input the line number you want to select, and then press OK.

Station Letter Jump — Press CC or cc to jump

to the next station name with a different initial letter.

Satellite Jump —Press Z or z to jump to the

next channel on a different Satellite.

Renumber — Same as Antenna/Cable channels.

See page 26.

Move — Same as Antenna/Cable channels. See

page 26.

Sort — Press the YELLOW button. A confirmation

window will appear. Press

C or c to select Yes and

press OK.

The Sort menu will appear.

Group —Press C or

c to select All or By Satellite.

Sorting Type — Press C or

c to set the sorting type.

A - Z Station name order (A to Z)

Channel Number Position No. order (numerical

sequence)

Preset Order — Press C or

c to set Yes or No.

This item is displayed when Country is set to Germany, and only applies to the Astra 19.2°E satellite.

Press

b to highlight Sort and press OK.

If the Standby Channel Update is set to On, when the TV is in

standby mode, Digital Tuning is automatically executed and any

new channels are saved.

a Select DTV Settings from the System Setup menu

and press OK.

b Press b to select Standby Channel Update and use

C or c to select On.

This feature allows you to manually select the character set

(Standard = Table 0, West = Table 5 or Latin alphabet 9) to be

used for DVB-C or DVB-T channels.

a Select DTV Settings from the System Setup menu

and press OK.

b Press b to select DVB Character Set and use C or c

to select Standard, West or Latin alphabet 9.

If the broadcast information has changed in your DVB-T

receiving area, the TV screen will display the message

“Broadcast information has changed. Would you like to

rescan now?”. Please follow the message. If you do not wish for

the TV to detect changes and prompt you to rescan, you should

set this feature to “Off”.

a Select DTV Settings from the System Setup menu

and press OK.

b Press b to select Dynamic Scan and use C or c to

select On.

Channels (Satellite)

Channels Line No. 4/1200

Satellite TV

1 DDD 19.2°E

Pos. Station Satellite

822 AA

823 AC

2AB

801 BBC

802 BB

803 BA

25.6°E

19.2°E

22.5°E

Group By Satellite

Sorting Type Channel Number

Preset Order Yes

Sort

Standby Channel Update

DVB Character Set

Dynamic Scan

SETTING UP YOUR TV

English

You can select either Home or Store mode. Home is

recommended for normal home use. Select Store when using the

television for displaying in a shop, etc.

a Select Location from the System Setup menu.

b Press C or c to select Home or Store.

This is a digital television which is integrated to allow the use of both digital and analogue services. However, during the lifetime of this set it is very likely that analogue services will be switched off to allow for more new digital services.

This ‘switch-off’ will happen in a number of phases, which will be advertised in your area well in advance. It is recommended that at each phase the television is re-tuned to ensure that existing and new digital services can be viewed without disruption.

Location setting

Analogue switch-off

English

CONTROLS AND FEATURES

General controls

Quick Menu helps you access some options quickly, such as Picture Mode, Picture Size, More Inform ation, Sleep Timer

etc.

Press QUICK to display the Quick Menu and use

B or b to

select the option.

NOTE: Quick Menu items are different depending on the current mode.

Quick menu item example

To select a position, use the numbered buttons on the remote control.

Positions can also be selected using P

U and Pu.

To display on-screen information such as position, input mode or stereo/mono signal, press . Press again to cancel.

The time display facility allows the current (text service) time to

be seen on the television screen.

Press

D whilst watching a normal television broadcast

to see the time display from the broadcaster. It will remain on screen for about 5 seconds.

NOTE: This display may not be available in some cases.

For DTV programmes

Fo r ster eo or d ual mono b roa dcast s, pre ss s and use C or

c to select settings.

For multi-audio track broadcasts, press

s repeatedly to

change the audio language (see “Audio languages” on page 77).

For ATV programmes

If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time positions are

changed, disappearing after a few seconds. If the broadcast is

not in stereo, the word Mono will appear.

Stereo… Press

s to select Stereo or Mono.

Bilingual… Bilingual transmissions are rare. If they are

transmitted, the word Dual will be displayed. Choose the required programme number, and if the word Dual appears, press

s to select Dual 1, Dual 2 or Mono.

Quick Menu

Mode Quick menu item Description

When viewing a TV programme or pictures from the external input

Picture Mode See page 34.

Picture Size See page 32.

Personal Mode See page 84.

More Information See page 74.

Channel Options See page 76.

BBC iPlayer See page 59

Sleep Timer See page 72.

REGZA-LINK Device Control

See page 87.

Speakers See page 86.

Headphone Level See page 31.

Wireless Information See page 45.

When using EPG Genre Colour See page 75.

EPG Update/ Cancel EPG Update

See page 74.

Media Player (Photo Multi View, List View)

Sort See page 65.

Interval Time See page 64.

Repeat See page 64.

Shuffle See page 68.

Device Information See page 65.

Wireless Information See page 45.

Quick Menu

Picture Size

Picture Mode AutoView

Super Live

More Information

Personal Mode

Sleep Timer

Channel Options

BBC iPlayer

TV Speakers

Headphone Level

REGZA-LINK Device Control

Wireless Information

Speakers

00:00

Photo Frame (Full Screen)

Picture See page 34.

Picture Size See page 32.

Personal Mode See page 84.

Selecting positions

The Time Display – analogue only

Stereo and Bilingual transmissions

Mode Display Pressing c

Stereo Stereo S Left S Right

Dual mono Dual 1

S Dual 2

Mono –

Multichannel –

Mode Quick menu item Description

CONTROLS AND FEATURES

English

Sound controls

Volume

Press

y or Y to adjust the volume.

Sound Mute

Press once to turn the sound off and again to cancel.

If a programme or film is being broadcast with a soundtrack in

more than one language, the DUAL feature allows selection

between them.

a Press MENU / C c to highlight Setup icon.

b Press B / C c to highlight Sound icon and press OK.

c Press B or b to select Dual and press C or c to

choose between Dual 1 or Dual 2.

a In the Sound menu, press B or b to select Balance,

and then press

C or c to emphasize left or right

speaker balance.

You can customize current sound mode settings. Select the

appropriate mode in accordance with the installation location of

the TV (Stand or Wall) and adjust the equalizer on-screen as

desired.

a In the Sound menu, press B or b to select Advanced

Sound Settings and press OK.

b Press B or b to select Sound Navi and press OK.

c Press C or c to select either Stand or Wall depending

on how your TV is installed, and then press the RED button.

d Press C or c to select the frequency range you want

to adjust from the equalizer window, and then press

B or b to adjust the level.

e Repeat step 4 for other frequencies.

Surround and Voice Enhancement help to create an

enhanced surround sound experience with deep, rich bass from

stereo sound sources. Your TV’s audio will sound fuller, richer,

and wider.

a In the Sound menu, press B or b to select Advanced

Sound Settings and press OK.

b Press B or b to select Surround and press C or c to

select Off, Spatial or Cinema.

This feature provides a consistent sound volume regardless of

programmes, channels or input sources.

a In the Sound menu, press B or b to select Dolby

Volume.

b Press C or c to select Low, High or Off.

NOTE:

•The Dolby Volume setting influences the Dynamic Range Control and Digital Audio Output settings.

•If Dynamic Range Control is set to On, this feature will be disabled.

Volume controls and sound mute

Dual

Balance

Sound Navi

Sound

Dual

Balance

Advanced Sound Settings

Audio Level Offset

Headphone Settings

Audio Description

Dual 1

Dolby Volume Low

Dynamic Range Control Off

Surround Off

Voice Enhancement

Sound Navi

Advanced Sound Settings

Surround Settings

Dolby Volume®

TV Mounting Stand

Sound Navi

+20

-20 100 330 1K 3.3K 10K [Hz]

21012[Level]

Equalizer

Surround Off

Voice Enhancement

Sound Navi

Advanced Sound Settings

+ 72 hidden pages

Toshiba 32SL863B, 37SL863B, 46SL863B, UL86* Digital Series, SL86* Digital Series Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual