Toshiba UL863-32, UL863-37, UL863-46, SL863-37, SL863-32 User Manual
...
SL86* Digital
Series
UL86* Digital
Series
Register your TV online at
www.toshiba.co.uk/registration
Contents
English
INSTALLING YOUR TV
Safety Precautions ............................................................................. 4
Installation and important information ..................................... 5
The remote control ........................................................................... 8
Inserting batteries and effective range ............................ 8
The remote control ........................................................................... 9
Inserting batteries and effective range ............................ 9
CONNECTING YOUR TV
Connecting external equipment ................................................10
Connecting an HDMI® or DVI device to the HDMI input ...11
To connect an HDMI device ...............................................11
To connect a DVI device ......................................................11
HDMI’s ARC (Audio Return Channel) feature ...............11
REGZA-LINK connection ................................................................12
Connecting a computer ................................................................13
To connect a PC to the RGB/PC terminal .......................13
To connect a PC to the HDMI terminal ...........................13
Connecting a home network ......................................................14
To connect the TV to a home network - Wired ...........14
To connect the TV to a home network with an
internet connection - Wireless ......................................14
Setting up the USB HDD (for UL86 series) ..............................15
Controls and input connections .................................................16
Switching on ............................................................................16
Using the remote control ....................................................16
Using the TV controls and connections .........................16
MENU structure ................................................................................17
SETTING UP YOUR TV
Startup Application .........................................................................18
Quick Setup ..............................................................................18
Ant/Cable/Satellite (if available) .......................................19
Satellite Settings .....................................................................20
Auto Tuning .............................................................................22
ATV Manual Tuning .........................................................................23
Tuning ........................................................................................23
Skip ..............................................................................................24
Sorting positions ....................................................................24
DTV Manual Tuning ........................................................................25
Manual Tuning ........................................................................25
Manual Tuning for DVB-C ...................................................25
Manual Tuning for DVB-S ....................................................25
DTV Settings ......................................................................................26
Channels (Antenna/Cable) .................................................26
Channels (Satellite) ................................................................27
Standby Channel Update ....................................................27
DVB Character Set ..................................................................27
Dynamic Scan ..........................................................................27
Location setting ......................................................................28
Analogue switch-off ............................................................28
CONTROLS AND FEATURES
General controls ...............................................................................29
Quick Menu ..............................................................................29
Selecting channels ................................................................ 29
The Time Display – analogue only .................................29
Stereo and Bilingual transmissions .................................29
Sound controls .................................................................................30
Volume controls and sound mute ...................................30
Dual ............................................................................................. 30
Balance ......................................................................................30
Sound Navi ............................................................................... 30
Surround Settings .................................................................. 30
Dolby Volume® .......................................................................30
Dynamic Range Control ......................................................31
Audio Level Offset .................................................................31
Headphone Settings .............................................................31
Audio Description ................................................................. 31
Widescreen viewing ....................................................................... 32
Picture controls ................................................................................ 34
Picture Mode ...........................................................................34
Picture preferences ...............................................................34
Reset ...........................................................................................34
ColourMaster ...........................................................................34
Base Colour Adjustment .....................................................35
Colour Temperature .............................................................35
Auto Brightness Sensor Settings ......................................35
Active Backlight Control ...................................................... 35
Black/White Level ..................................................................36
Static Gamma .......................................................................... 36
MPEG NR – Noise Reduction ..............................................36
DNR – Digital Noise Reduction .........................................36
Resolution+ .............................................................................. 36
Active Vision M100 ................................................................36
Motion Detection Range ..................................................... 36
Resetting the advanced picture settings ......................37
Expert Picture Settings ........................................................37
Control Visualization ............................................................ 39
Automatic Format (Widescreen) ......................................39
4:3 Stretch ................................................................................ 39
Blue Screen .............................................................................. 39
Picture Position ...................................................................... 39
Picture still ................................................................................ 40
HDMI Information Display ..................................................40
Using your home network ...........................................................41
Wireless LAN Information (for UL86 series) ............................ 42
Setting up the Network ................................................................. 43
Wireless Setup ........................................................................ 43
Advanced Network Setup .................................................. 45
DNS Setup ................................................................................ 46
Network Connection Test ................................................... 47
Using the software keyboard ......................................................47
Network Device Setup ................................................................... 48
External Control Setup ......................................................... 48
Media Renderer Setup .........................................................48
Power Control Mode ............................................................49
Device Name Setup .............................................................. 49
2
Using the USB HDD Function (for UL863 series) ..................49
To record DTV programmes
(One Touch Recording) ....................................................50
To schedule programmed recording .............................50
To check, edit or delete scheduling information .......53
To view a recorded programme .......................................53
Operations from the Library screen ................................54
Other useful functions (Time Shift Recording) ............55
Recording Setup .....................................................................55
To disconnect a USB HDD ...................................................56
To confirm/delete Recording Information ...................57
Scheduling priority ................................................................57
Camera Sensor Settings ................................................................58
Using Toshiba Places ......................................................................59
Using BBC iPlayer .............................................................................59
Using YouTube™ ..............................................................................60
Using the Function Menu ...................................................60
Using Hybrid TV Standard (if available) ...................................62
Using the Media Player ..................................................................63
Basic operation .......................................................................63
Viewing photo files
(on a DLNA CERTIFIED™ Server or USB device) .......65
Viewing movie files
(on a DLNA CERTIFIED™ Server or USB device) .......66
Playing music files
(on a DLNA CERTIFIED™ Server or USB device) .......69
Using the Photo Frame feature ..................................................70
To open Photo Frame ...........................................................70
Setting the features ...............................................................71
Other features ................................................................................... 72
Panel Lock .................................................................................72
The timers ...........................................................................................73
Programme Timers – digital only ...................................73
On Timer ....................................................................................73
Sleep Timer ..............................................................................74
Energy Saving Settings ..................................................................74
Automatic Power Down ......................................................74
No Signal Power Down ........................................................74
Digital on-screen information and Programme Guide ......75
Information ..............................................................................75
Guide .......................................................................................... 76
Genre selection/searching ..................................................76
Digital settings – parental control ............................................77
Parental PIN Setup .................................................................77
Parental Setup .........................................................................77
Network Lock .......................................................................... 77
Digital settings – Channel Options ..........................................78
Selecting favourite channels .............................................78
Favourite Channel Lists .......................................................78
Skip channels ...........................................................................78
Locking channels ...................................................................78
Digital settings – other settings ................................................79
Subtitles .....................................................................................79
Audio languages ....................................................................79
Common Interface ................................................................79
Software Upgrade and Licences ................................................80
Auto Upgrade ......................................................................... 80
Searching for New Software ..............................................80
Network Upgrade .................................................................. 80
Software Licences .................................................................. 80
System Information and Reset TV ............................................. 81
System Information ..............................................................81
Reset TV ..................................................................................... 81
PC Settings ......................................................................................... 81
Horizontal and Vertical Position .......................................81
Clock Phase .............................................................................. 81
Sampling Clock .......................................................................82
Reset ...........................................................................................82
Input selection and AV connections ........................................ 82
Input selection ........................................................................ 82
External input skip .................................................................83
Labeling video input sources ............................................83
PC Audio ...................................................................................84
HDMI 3 Audio ..........................................................................84
HDMI Settings .........................................................................84
Digital Audio Output ............................................................84
Using Personal TV Mode ...............................................................85
Using REGZA-LINK ........................................................................... 87
Enable REGZA-LINK ............................................................... 87
TV Auto Power ........................................................................87
Auto Standby ..........................................................................88
Amplifier Control ................................................................... 88
Initial Speaker Setting ..........................................................88
Position Key Pass Through .................................................88
REGZA-LINK input source selection ................................88
REGZA-LINK Device Control ...............................................89
REGZA-LINK one touch play .............................................. 89
REGZA-LINK system standby .............................................89
REGZA-LINK system audio control .................................. 89
Toshiba PC compatible with REGZA-LINK ....................89
TEXT SERVICES
Text services ......................................................................................90
Selecting modes ....................................................................90
Text information ....................................................................90
Navigating pages using Auto ............................................90
Navigating pages using LIST .............................................90
Control buttons ......................................................................91
PROBLEM SOLVING
Questions and Answers ............................................................... 92
INFORMATION
License Information ........................................................................ 95
Information ........................................................................................ 97
Specifications and accessories ................................................ 100
English
3
INSTALLING YOUR TV
Safety Precautions
English
This equipment has been designed and
manufactured to meet international safety standards
but, like any electrical equipment, care must be taken
to obtain the best results and for safety to be assured.
Please read the points below for your own safety.
They are of a general nature, intended to help with all
electronic consumer products, and some points may
not apply to the goods you have just purchased.
Air Circulation
Leave more than 10cm clearance around the
television to allow adequate ventilation. This will
prevent overheating and possible damage to the
television. Dusty places should also be avoided.
Heat Damage
Damage may occur if the television is left in direct
sunlight or near a heater. Avoid places subject to
extremely high temperatures or humidity. Place in a
location where the temperature remains between 5°C
(41°F) min. and 35°C (94°F) max.
Mains Supply
The mains supply required for this equipment is 220240v AC 50/60Hz. Never connect to a DC supply or any
other power source. DO ensure that the television is
not standing on the mains lead. Use only the supplied
lead.
DO NOT cut off the mains plug from this equipment,
this incorporates a special Radio Interference Filter,
the removal of which will impair its performance.
In the UK, the fuse fitted in the plug is approved by
ASTA or BSI to BS1 362. It sh ould on ly be r eplace d by a
correctly rated and approved type and the fuse cover
must be refitted.
IF IN DOUBT, PLEASE CONSULT A COMPETENT
ELECTRICIAN.
Do
DO read the operating instructions before you
attempt to use the equipment.
DO ensure that all electrical connections (including
the mains plug, extension leads and interconnections between pieces of equipment) are
properly made and in accordance with the
manufacturers’ instructions. Switch off and withdraw
the mains plug before making or changing
connections.
DO consult your dealer if you are ever in doubt about
the installation, operation or safety of your
equipment.
WARNING: To prevent injury, this apparatus must be
securely attached to the floor/wall in accordance with
the installation instructions. See page 5.
DO be careful with glass panels or doors on
equipment.
DO NOT REMOVE ANY FIXED COVERS AS THIS WILL
EXPOSE DANGEROUS AND ‘LIVE’ PARTS.
THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE
AND THEREFORE SHOULD BE READILY OPERABLE.
Do not
DO NOT obstruct the ventilation openings of the
equipment with items such as newspapers,
tablecloths, curtains, etc. Overheating will cause
damage and shorten the life of the equipment.
DO NOT allow electrical equipment to be exposed to
dripping or splashing or objects filled with liquids,
such as vases, to be placed on the equipment.
DO NOT place hot objects or naked flame sources,
such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and
lead to fires.
WARNING: To prevent the spread of
fire, keep candles or other open
flames away from this product at all
times.
DO NOT use makeshift stands and NEVER fix legs with
wood screws. To ensure complete safety, always fit
the manufacturer’s approved stand, bracket or legs
with the fixings provided according to the
instructions.
DO NOT leave equipment switched on when it is
unattended, unless it is specifically stated that it is
designed for unattended operation or has a standby
mode. Switch off by withdrawing the plug, and make
sure your family knows how to do this. Special
arrangements may need to be made for people with
disabilities.
DO NOT continue to operate the equipment if you
are in any doubt about it working normally, or it is
damaged in any way – switch off, withdraw the mains
plug and consult your dealer.
WARNING: Eexcessive sound pressure from
earphones or headphones can cause hearing loss.
ABOVE ALL: NEVER let anyone, especially children,
push or hit the screen, or push anything into holes,
slots or any other openings in the case.
NEVER guess or take chances with electrical
equipment of any kind – it is better to be safe than
sorry.
4
Installation and important information
Stand style is dependent on model
Where to install
Locate the television away from direct sunlight and
strong lights. Soft, indirect lighting is recommended
for comfortable viewing. Use curtains or blinds to
prevent direct sunlight falling on the screen.
Place the TV on a stable, level surface that can
support the weight of the TV. In order to prevent
injury and maintain stability of this apparatus,
secure the TV to the level surface using the strap if
fitted, or to a wall using a sturdy tie to the P clips
provided. Otherwise secure the TV on the level
surface using the supplied mounting screw.
The LCD display panels are manufactured using an
extremely high level of precision technology;
however, sometimes some parts of the screen may be
missing picture elements or have luminous spots.
This is not a sign of a malfunction.
Make sure the television is located in a position where
it cannot be p ushed or hit b y objects, as pressure wil l
break or damage the screen. Also, please be certain
that small items cannot be inserted into slots or
openings in the case.
When using a Wall Bracket
Please use a wall bracket appropriate for the size and
weight of the LCD TV.
• Two people are required for installation.
• Never use the four screws attached to the TV.
a Unplug and remove any cables and/or other
component connectors from the rear of the TV.
‘P’ Clip
INSTALLING YOUR TV
English
Fixing strap
Fixing strap
Sturdy tie (as short as possible)
Stand clip
Screw
(supplied)
b Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket.
c Follow the instructions provided with your wall
bracket.
Before proceeding, make sure the appropriate
bracket(s) are attached to the wall and the back of the
TV as described in the instructions provided with the
wall bracket.
d Always use the screws supplied or recommended by
the wall mount manufacturer.
5
Remove four screws.
(Do not reuse these screws for
attaching a wall bracket.)
INSTALLING YOUR TV
English
Please take note
The digital reception function of this television is only effective in the countries listed in the “Country” section of
the “Setup/System Setup” menu. Depending on country/area, some of this television’s functions may not be
available. Reception of future additional or modified services can not be guaranteed with this television.
If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays,
video games, on-screen menus, etc. are left on the television screen for any length of time, they could become
conspicuous. It is always advisable to reduce both the brightness and contrast settings.
Very long, co ntinuous use of the 4:3 picture on a 16:9 screen may result in some re tention of th e image at the 4:3
outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of
other size modes (e.g.: Super Live) will prevent permanent retention.
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) Fire;
ii) Earthquake;
iii) Accidental damage;
iv) Intentional misuse of the product;
v) Use of the product in improper conditions;
vi) Loss and/or damage caused to the product whilst in the possession of a third party;
vii) Any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s manual;
viii) Any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with
associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not
limited to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal
operation or misuse of the product.
When Using a USB HDD (for UL86 series)
• The recording function has been designed for private
use and entertainment in your home environment.
Please note that any commercial use of the recording
function could lead to copyright infringement of
authors’ rights. Toshiba asks you to respect the
intellectual property rights of third parties.
• Before recording to a device connected to the TV, make
a test recording and check the recording performance.
• Programmes that are prohibited from copying due to
copyright protection cannot be recorded.
• Toshiba shall not be liable for compensation or
incidental damages of any kind whatsoever resulting
from content that was not properly recorded on the
recording device or that was modified or lost.
• Toshiba shall not be liable for damages of any kind
whatsoever (breakdown of the recording device,
modification or loss of the recorded content, etc.)
resulting from malfunction, operating failure or
incorrect operation due to combining with another
connected device.
• If you connect and register a USB HDD that has been
used with a PC or another TV, all the data and recorded
programmes stored on the disk will be deleted.
• To use a USB HDD that has been used with this TV on a
PC, the hard disk must first be formatted with the PC. At
this time, all the data stored using the TV will be
deleted.
• Do not turn off the power supply to the USB HDD or
disconnect the connecting cable while the USB HDD is
operating.
Doing so may result in loss of the recorded data or
malfunction of the USB HDD.
• If you connect a USB bus-powered device to the USB 1
port, it may interfere with recording on the USB HDD.
• The recording function is not available in all countries.
• Please note that recording on the USB HDD is no longer
playable after the TV’s main-board is exchanged during
service.
6
About the Camera Sensor (for UL86 Series)
29° 29°
Personal
Identication
(50 ~ 400cm)
Face Detection
(50 ~ 500cm)
The camera sensor installed in this TV can detect a person’s
face or movement and identify individuals by their registered
faces. Please note that certain factors can affect the
performance of the sensor function as set out below.
General Sensor Function
• For the sensor to operate (for each function) you will need
to be within the sensor detection range as set out below.
• The approximate effective detection range of the camera
sensor is as shown below. (Note: The distance and angle of
the detection range are based on a standard viewing
environment and conditions).
– Horizontal angle: approx. 58° (approx. 29° × 2)
– Vertical angle: approx. 34° (upward approx. 27°,
downward approx. 7°)
27°
7°
Personal
Identication
(50 ~ 400cm)
Face Detection (50 ~ 500cm)
–Distance: approx. 50 cm to 500 cm (Personal Identification
Function: approx. 50 cm to 400 cm)
• Do not place anything in front of the TV that may
obstruct detection or reduce the sensor detection
range.
Motion Detection Function
• Motion detection may be affected by the surrounding
environment, such as the brightness of the room. In
addition, very slight, small or momentary movement may
be undetected.
• Sensor performance can be enhanced by making sure the
room is brightly lit and using prolonged and obvious
movements.
• Billowing curtains, a pet or variations in illumination in the
detection range may be detected as motion, even if there is
no person there.
• You can use the camera sensor confirmation menu to check
that no movement made by other persons is being detected.
INSTALLING YOUR TV
Face Detection Function
• The sensor can detect up to eight persons.
• Face Detection may be affected if:
– Your face is obstructed or partially hidden, for example,
by your hair, a mask or a hat,
– Your head is tilted or turned to one side, or
– You are wearing dark glasses or the light is reflected in
your glasses.
• You can use the camera sensor confirmation menu to check
whether your face is detected.
• The camera sensor may detect background images such as
a picture portrait or the pattern on the wall as eyes or nose
even if there is no person there. You can use the
confirmation screen to check whether any such object in
the detection range is being incorrectly detected as a face.
• Face Detection can be less effecti ve on darker complexions
and in darker environments.
• Face Detection can be enhanced by making sure your face
is clearly visible and evenly lit. If the room is dark, Face
Detection can be enhanced by making sure the room is
brightly lit. If the lighting environment creates a sh adow on
your face, Face Detection can be enhanced by adjusting the
lighting to prevent shadows.
Personal Identification Function
• The Personal Identification Function is part of the Face
Detection Function. The factors affecting the Face
Detection Function set out above also apply to the Personal
Identification Function.
• Personal Identification may in addition be affected by:
– A different shadow pattern from that when your face was
registered. Personal Identification accuracy can be
enhanced by registering additional facial images under
different conditions.
– A different lighting environment from when your face was
registered, such as during the day and at night. Personal
Identification accuracy can be enhanced by registering
your face under various lighting environments.
– Whether or not you are wearing glasses. If you wear
glasses, we recommend that you register your face both
with and without glasses.
– A different facial expression. Personal Identification accuracy
can be enhanced by registering different facial expressions.
• Personal Identification may be affected when faces have
similar characteristics (e.g. brothers, sisters, twins).
• Personal Identification is less effective on the faces of young
children.
Face Registration Function
• Up to four people can be registered under the Personal
Identification Function. The same person cannot be
registered twice.
• A maximum of 10 different facial images per person can be
registered. Personal identification accuracy can be enhanced
by registering different facial images as set out above.
• It is advisable to register your face in your usual viewing
position and with your natural facial expression. Registering
your face too near to or too far from the screen may hinder
identification performance.
7
English
INSTALLING YOUR TV
1
2
5
4
8
9
20
17
16
22
11
24
27
26
25
23
21
18
14
19
15
13
12
10
3
6
7
The remote control
English
CT-90369 (for SL86 series)
16 To access “TOSHIBA PLACES” Top Page
When network is not connected, an error message will be
displayed.
17 To access Media Player Menu
18 To call up text services
19 To access the analogue or digital Channel List
20 On-screen Menus
21 To display the digital on-screen Programme Guide
22 To page up, down, left or right
23 When using menus, the arrows move the cursor on the screen
up, down, left or right. Press OK to confirm your selection
24 To return to previous Menu
25 To exit menus
26 When in TV mode:
r Picture still
D Analogue time
display
When using Programme
Guide:
Z –24 hours
z +24 hours
CC –1 page
cc +1 page
27 Colour buttons: Text and interactive service control buttons
When in Text mode:
A To reveal concealed
text
B To hold a wanted
page
C To enlarge text
display size
D To select a page
while viewing a
normal picture
During Playback:
c
To PLAY
v To STOP
W/w To PAUSE/STEP
Z To SKIP-BACK
CC To REWIND
cc To FAST FORWARD
z To SKIP-FORWARD
1 For On/Standby mode
2 To select external input sources
3 To select TV Mode
4 Selectable Picture preferences
5 Widescreen viewing
s Stereo/bilingual transmissions
6
7 Digital Subtitles or Analogue TEXT Subtitle pages if available
8 Number buttons
9 Switch the Audio Description On/Off
10 To return to previous programme position
11 To alter the TV volume
12 To display on-screen information
To access the index page in Text mode
13 To mute the TV sound
14 To access Quick Menu
15 To change programme positions
To change TEXT pages
Inserting batteries and effective range
Remove the back cover to
reveal the battery
compartment and make sure
the batteries are inserted the
proper way. Suitable battery
types for this remote are AA,
IEC R6 1.5V.
Do not combine a used, old
battery types. Remove dead batteries immediately to preven t
acid from leaking into the battery compartment. Dispose of
them in accordance with instructions on page 96 of this
manual.
Warning: Batteries must not be exposed to excessive heat
such as sunshine, fire or the like.
The performance of the remote control will deteriorate
beyond a distance of five metres or outside an angle of 30
degrees from the centre of the television. If the operating
range becomes reduced, the batteries may need replacing.
battery with a new one or mix
8
The remote control
16
20
30
29
24
21
19
17
15
13
11
1
18
26
27
28
25
14
12
10
22
23
CT-90382 (for UL86 series)
2
4
5
7
1 For On/Standby mode
2 To select external input sources
3 To select TV Mode
4 To access Quick Menu
5 To access the “TOSHIBA PLACES” Top Page
When network is not connected, an error message will be
displayed.
6 To access the analogue or digital Channel List
7 To alter the TV volume
8 Switch the Audio Description On/Off
9 To mute the TV sound
10 To change programme positions
To change TEXT pages
11 On-screen Menus
12 To display the digital on-screen Programme Guide
13 When using menus, the arrows move the cursor on the
screen up, down, left or right
14 Press OK to confirm your selection
15 To return to previous Menu
INSTALLING YOUR TV
English
16 To exit menus
17 Colour buttons: Text and interactive service control
buttons
18 Number buttons
3
6
8
9
19 To display on-screen information
To access the index page in Text mode
20 To return to previous programme position
21 When in TV mode:
D Analogue time
display
When using Programme
Guide:
Z –24 hours
z +24 hours
CC –1 page
cc +1 page
When in Text mode:
A To reveal concealed
text
B To hold a wanted
page
C To enlarge text
display size
D To select a page
while viewing a
normal picture
During Playback:
c
To PLAY
v To STOP
W/w To PAUSE/STEP
Z To SKIP-BACK
CC To REWIND
cc To FAST FORWARD
z To SKIP-FORWARD
22 To record DTV programmes
23 To call up text services
24 Picture still
25 To access Media Player Menu
26 Selectable Picture preferences
27 Widescreen viewing
s Stereo/bilingual transmissions
28
29 To access More Information Menu
30 Digital Subtitles or Analogue TEXT Subtitle pages if
available
Inserting batteries and effective range
Remove the back cover to
reveal the battery compartment
and make sure the batteries are
inserted the proper way.
Suitable battery types for this
remote are AAA, IEC R03 1.5V.
Do not combine a used, old
battery with a new one or mix
battery types. Remove dead
prevent acid from leaking into the battery compartment.
Dispose of them in accordance with instructions on page 96
of this manual.
Warning: Batteries must not be exposed to excessive heat
such as sunshine, fire or the like.
The performance of the remote control will deteriorate
beyond a distance of five metres or outside an angle of 30
degrees from the centre of the television. If the operating
range becomes reduced, the batteries may need replacing.
batteries immediately to
9
CONNECTING YOUR TV
Satellite dish
LAN port
SCART (EXT 1)
DIGITAL AUDIO OUT PUT
(OPTICAL)
PC/HDMI 3 AUDIO INPUT
(shared)
HDMI 4 INPUT
HEADPHONE jack
VIDEO/AUDIO INPUT
(EXT 3)
HDMI 1/2/3 INPUTS
COMPONENT VIDEO/AUDIO
INPUT (EXT 2)
RGB/PC INPUT
Media Recorder
Aerial Cable
Power cord
ILLUSTRATION SHOWS 42UL863.
“F-type”
Connecting external equipment
English
Before connecting any external equipment, turn off all main power switches. If there is no switch,
remove the mains plug from the wall socket.
Aerial cables: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the aerial to the socket on the rear of the television.
If you use a decoder and/or a media recorder, it is essential
that the aerial cable is connected through the decoder and/o r
through the media recorder to the television.
Satellite cable: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the LNB from the satellite dish to the SATELLITE
ANTENNA socket on the TV. You can receive TV, radio,
interactive TV, and HD TV with clear reception.
SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the media recorder IN/OUT socket to the television.
Connect the decoder TV socket to the television.
Before running Auto Tuning, put your decoder and media
recorder to Standby.
The phono sockets alongside the COMPONENT VIDEO
INPUT sockets will accept L and R audio signals.
The Digital Audio Output socket enables the connection of a
suitable surround sound system.
NOTE: This output is always active.
HDMI® (High-Definition Multimedia Interface) is for use with a
DVD decoder or electrical equipment with digital audio and
video output. For acceptable video or PC signal formats
through the HDMI terminals, see page 98.
NOTE: Although this television is able to connect to HDMI
equipment, it is possible that some equipment may not
operate correctly.
LAN port is used to connect the TV to your home network.
This TV can play digital content stored on a DLNA CERTIFIED™
product with server function.
A wide variety of external equipment can be connected to
the back of the television; therefore, the relevant owner’s
manuals for all additional equipment must be referred to
for exact instructions.
If the television automatically switches over to monitor
external equipment, return to normal television by pressing
the desired programme position button. To recall external
equipment, press
EXT 3, HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC or ATV.
When the external input mode is s elected while viewing DTV
mode, the SCART socket does not output video/audio signals.
10
o to select between DTV, EXT 1, EXT 2,
CONNECTING YOUR TV
HDMI cable
HDMI device
the back of your television
Audio cable for HDMI to television
connection (not supplied)
HDMI-to- DVI adaptor Cable
DVI device
the back of your television
AV amplier that supports ARC
HDMI cable
the back of your television
English
Connecting an HDMI® or DVI device to the HDMI input
The HDMI input on your television receives digital
audio and uncompressed digital video from an
HDMI source device or uncompressed digital
video from a DVI (Digital Visual Interface) source
device.
This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant consumer electronic
devices (such as a set-top box or DVD player with HDMI or DVI
output). For acceptable video signal formats, see page 98.
NOTE:
• Some early HDMI equipment may not work properly with
your latest HDMI TV, due to the adoption of a new standard.
Please unplug your HDMI cable first and then try setting the
INSTAPORT™ and Enable Content Type options to “Off”.
Your early HDMI source should operate properly with your
television. See page 84.
• Supported Audio format: Linear PCM, Dolby Digital (AC-3),
sampling rate 32/44.1/48kHz.
To connect an HDMI device
Connect an HDMI cable (type A connector) to the HDMI
terminal.
For proper operation, it is recommended that you use an
HDMI cable with the HDMI Logo ( ).
• If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50Hz, you
will need a Category 2 cable. Conventional HDMI/DVI cable
may not work properly with this model.
• HDMI cable transfers both video and audio. Separate
analogue audio cables are not required (see illustration).
• See “HDMI 3 Audio” section on page 84.
To connect a DVI device
Connect an HDMI-to-DVI adaptor cable (HDMI type A
connector) to the HDMI 3 terminal and audio cables to the PC/
HDMI 3 (AUDIO) socket (see illustration).
• The recommended HDMI-to-DVI adaptor cable length is
6.6 ft (2m).
• An HDMI-to-DVI adaptor cable transfers video only.
Separate analogue audio cables are required.
• See “HDMI 3 Audio” section on page 84.
NOTE:
To ensure that the HDMI or DVI device is reset properly, it is
recommended that you follow these procedures:
• When turning on your electronic components, turn on the
television first, and then the HDMI or DVI device.
• When turning off your electronic components, turn off the
HDMI or DVI device first, and then the television.
HDMI’s ARC (Audio Return Channel)
feature
This feature enables the audio signal of the TV to be sent to
the AV amplifier via the HDMI cable. It will not be necessary to
connect a cable from the audio output of the TV to the audio
input of the AV amplifier to reproduce the audio received
from the tuner of the TV through the AV amplifier.
To view the HDMI device video, press the
HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.
o button to select
11
CONNECTING YOUR TV
AV amplier Playback device
Playback device
the back of your television
REGZA-LINK connection
English
You can control the basic functions of connected audio/video devices using the television’s remote
control if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of
setup and operations, see pages 87–89.
For the setup shown above, you will need three HDMI cables.
NOTE:
• If several devices are connected, the REGZA-LINK feature
may not operate properly.
• For proper operation, it is recommended that you use HDMI
cables with the HDMI Logo ( ).
• This function is available when one PC and one AV amplifier
are connected separately. However, it may not operate
properly if the PC is connected via the AV amplifier.
Before controlling the device(s):
• After completing the above connections, set the REGZALINK Setup menu as you desire (see page 87).
• The connected devices must also be set. For details, see the
operation manual for each device.
• The REGZA-LINK feature uses CEC technology as regulated
by the HDMI standard.
• This feature is limited to models incorporating Toshiba’s
REGZA-LINK. However, Toshiba is not liable for those
operations. Refer to individual instruction manuals for
compatibility information.
12
CONNECTING YOUR TV
the back of your television
Audio cable for PC to television
connection (not supplied)
Conversion adaptor
if required
(not supplied)
Computer
RGB PC cable (not
supplied)
Mini D-sub
15 pin connector
Audio cable for PC to television
connection (not supplied)
HDMI-to-DVI
adaptor cable
the back of your television
Computer
English
Connecting a computer
With either an RGB/PC or an HDMI connection, you
can watch your computer’s display on the
television and hear the sound from the television’s
speakers.
To connect a PC to the RGB/PC terminal
When connecting a PC to the RGB/PC terminal on the
television, use an analogue RGB (15-pin) computer cable and
a PC audio cable for the PC/HDMI 3 (AUDIO) socket. Select PC
from the PC/HDMI 3 Audio options in the AV Connection
menu located in the Preferences menu.
To connect a PC to the HDMI terminal
When connecting a PC to the HDMI terminal on th e television,
use an HDMI-to-DVI adaptor cable and an analogue audio
cable.
If connecting a PC with an HDMI terminal, use an HDMI cable
(type A connector). A separate analogue cable is not
necessary.
For acceptable PC and video signal formats, see page 98.
NOTE:
• The edges of the images may be hidden.
• If connecting a certain PC model with a unique PC signal,
the PC signal may not be detected correctly.
To use a PC, set the monitor output resolution on the PC
before connecting it to the television. For acceptable PC
signal formats, see page 97.
To display the optimum picture, use the PC setting feature
(see page 81).
NOTE:
• The PC audio input terminal on the television is shared with
the HDMI 3 analogue audio input terminal (see page 84).
• Some PC models cannot be connected to this television.
• An adaptor is not needed for computers with a compatible
mini D-sub15-pin terminal.
• Depending on the DVD’s title and the specifications of the
PC on which you are playing the DVD-Video, some scenes
may be skipped or you may not be able to pause during
multi-angle scenes.
• A ba nd m ay app ea r at the ed ges of t he scr een or p ar ts o f t he
picture may be obscured. This is due to scaling of the
picture by the set, it is not a malfunction.
• When PC input mode is selected, some of the television’s
features will be unavailable e.g. Colour System in the
Setup/System Setup menu.
• Some PC models may output unique signals that the
television may be unable to detect (see page 97).
13
CONNECTING YOUR TV
Modem (if available)
Server PC
Router with Hub
the back of your television
Cable or Phone jack
[1] [2]
[2]
[3][2]
Access point (AP)
Wireless LAN router
Modem
TOSHIBA Dual
Band WLAN
adaptor
(for SL86 series)
the back of your television
Computer
Connecting a home network
English
The LAN port allows your Toshiba TV to connect to
your home network. You can use this revolutionary
home entertainment networking system to access
photo, video and audio files that are stored on a
DL NA CER TIF IED ™ s erv er a nd pla y/d isp la y th em o n
your TV.
NOTE:
• If you connect to a shared network outside your home, it is
advisable to use a router. Always use DLNA CERTIFIED™
products in private network environments.
• If you use a hub or switch to connect the TV to your home
network, you may not be able to use the automatic setup
and will have to manually set up the network address. See
page 46.
• If you use a router with built-in DHCP functionality, use the
automatic setup. Manual setup may not work.
• If you connect the TV and PC directly, use a crossover LAN
cable.
To connect the TV to a home network -
Wired
To connect the TV to a home network
with an internet connection - Wireless
Please refer to “Wireless Setup” section on page 43.
NOTE: UL86 has a built in WLAN Module.
[1] Coaxial or telephone cable (depending on your modem typ e)
[2] Standard LAN cable
[3] Do NOT connect a phone jack directly to the TV’s LAN port.
14
Setting up the USB HDD (for UL86 series)
To USB2
USB cable
(not supplied)
USB HDD
An unregistered USB HDD has been detected.
Register the USB HDD?
Yes
Device Name
Registered
Connected
USB HDD 1
USB HDD 2
USB HDD 3
Device List
To connect an USB HDD (not supplied)
NOTE: For available USB HDD information, see "Product Information" on the website.
To register an USB HDD
When you connect a new USB HDD to the USB 2 port on the
TV, the following screen will appear.
a Press C or c to select Yes and press OK.
The formatting confirmation window will appear.
b Press C or c to select Yes and press OK.
Registration will start.
c If you want to name the USB HDD, press C or c to
select Yes and press OK.
See page 47 to input characters.
The maximum number of characters is 10.
If you prefer the default name ”USB HDD X,” select No
and press OK.
d The Device List will appear.
While in the list mode, the following key operations
are available:
OK button................. To register/remove
RED button ..............To disconnect
GREEN button ........ To change Device Name
YELLOW button .....To test
BLUE button............ To format
NOTE:
• To disconnect a USB HDD from the TV, follow the
procedures for “To disconnect a USB HDD” section
(page 56).
• When using a USB HDD, if necessary, perform the settings
and operations shown in “Using the USB HDD Function”
section (page 49).
• Connect the USB HDD to the USB 2 port.
Recording and playback cannot be performed if connected
to the USB 1 port.
• Up to 8 USB HDDs can be registered to this TV.
• Recorded programmes saved on the USB HDD can only be
viewed on this TV. They cannot be viewed when connected
to another TV (including the same model of TV), a PC, or
other device.
• If a USB HDD is re-registered, it will not be formatted.
• When the USB HDD is formatted, all the data stored on the
HDD will be deleted.
CONNECTING YOUR TV
English
You can now use registered USB HDDs.
15
CONNECTING YOUR TV
Controls and input connections
English
A wide variety of external equipment can be connected to the input sockets on the side of the television.
While all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used for some functions.
ILLUSTRATION SHOWS 42UL863.
USB 1 port
Media Player
COMMON INTERFACE
The Common Interface is for a Conditional Access
Module (CAM).
Contact a service provider.
The software updating of CI Plus CAM may be
automatically executed. At this time, your
Recording/Reminder programming will be canceled.
USB 2 port
Media Player/
WLAN adaptor ready for a home network (SL86 series)
WLAN Module built-in (UL86 series)
USB HDD connection ready (UL86 series)
Ambient
Light Sensor
ORANGE LED – Programme
timer set (digital only)
RED LED – Programme timer
Active (digital only)
RED LED – Standby
GREEN LED – Power on
Camera Sensor
Control panel (touch sensor)
Switching on
If the RED LED is not lit, check that the mains plug is
connected to the power supply and press
control; it may take a few moments. The GREEN LED will be lit.
To put the television into Standby, press
control. To view the television, press
take a few seconds to appear.
For energy saving:
We recommend that you use the television with the factory
settings. The factory settings are for energy saving.
Unplugging the mains plug will cut energy use to zero for
all televisions. This is recommended when the television is
not being used for a long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy use.
Energy efficiency cuts energy consumption and thus saves
money by reducing electricity bills.
NOTE: Putting the television into standby mode will reduce
energy consumption, but will still draw some power.
1 on the remote
1 on the remote
1 again. The picture may
Using the remote control
Press MENU on the remote control to display the menu.
The five initial topics icons will appear. As each symbol is
selected by pressing
BbC c to enter a sub menu and then enter a further sub
menu to see any options.
NOTE: The same menu is displayed in DTV (Digital TV) and
ATV (Analogue TV) modes; however, where some items are
not available in a mode, they will appear grayed out.
C or c on the remote control. Press
To use the option, press
move up and down and press
setting. Follow the on-screen instructions. The functions of
each menu are described in detail throughout the manual.
B and b on the remote control to
C or c to select your desired
Using the TV controls and connections
To alter the volume gently touch –
To alter the programme position touch
Touch MENU and
picture options.
Touch MENU to finish.
To select an external input, touch
input source is selected.
The Media Player feature provides access to photo, movie and
music files stored on a USB storage device that is connected
via the USB 1 or USB 2 port or on a network device.
NOTE: The USB socket has limited functionality and Toshiba
can take no responsibility for damage to other connected
equipment.
For SL86 series, the USB 2 socket has to be used with the
“TOSHIBA Dual Band WLAN Adaptor WLM-10U2” in order to
access a wireless network.
This feature is available only when the “TOSHIBA Dual Band
WLAN Adaptor“ is used.
Please always refer to the owner’s manual of the equipment to be
connected for full details.
NOTE: Interactive video games that involve shooting a “gun”
at an on-screen target may not work with this TV.
b p B , – 2 + to control the sound and
2 +.
b p B.
o until the appropriate
16
CONNECTING YOUR TV
TV Programmes
Media Player
Connected TV
Setup
Function
Programme
Timers
Genre Search
Library
Guide
MENU structure
To ope n th e mai n me nu ( ill ust rati on b elo w) , pre ss MENU on the remote control or on the TV control panel.
1st Layer 2nd Layer 3rd Layer
Press MENU. Press
TV Programmes
C c / B. Press C c.Press OK. Press BbC c.
English
Media Player
Connected TV
Function
Setup
Guide
Genre Search
Programme Timers
Library
Photo
Movie
Music
Media Player Setup
Toshiba Places
BBC iPlayer
YouTube
Photo Frame
On Timer
Sleep Timer
Picture
Sound
Preferences
System Setup
Jump to Programme Guide (EPG)
Jump to Genre Search
Jump to Programme Timers
Jump to Library (for UL86 only)
Device Select or Photo Viewer
Device Select or Movie Viewer
Device Select or Music Viewer
Media Player Setup Menu
Jump to Toshiba Places
Jump to BBC iPlayer
Jump to YouTube
Jump to Photo Frame
On Timer Menu
Sleep Timer Menu
Picture Menu
Sound Menu
Preferences Menu
System Setup Menu
17
SETTING UP YOUR TV
Quick Setup
Country
English
Primary Subtitle Language
English
English
English
English
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
AutoView
No
AutoView mode automatically adjusts picture settings
to suit ambient light conditions.
Do you wish to enable AutoView mode?
Ant/Cable/Satellite
Satellite
Cable
Next
Antenna
Auto Tuning
Progress Found
ATV Tune Waiting...
Channel: C7
DTV Tune 3% 2
Startup Application
English
Before switching on the television, set your
decoder and media recorder, if applicable, to
Standby. To set up the television, use the buttons
on the remote control as detailed on page 8, 9.
Quick Setup
a Press the 1 button. The Menu Language screen will
appear. This screen will appear the first time that the
television is switched on and each time Reset TV is
selected.
b Press B b C c to select the menu language and
press OK.
c Highlight Country and press C or c to select. The
television is now set to tune the stations for your
country.
NOTE:
• The following display menus will differ slightly
according to the country you selected.
• If there is not a country that you want to select in the
list, select Others.
d Press OK, and the Location screen will appear.
Location
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.
Home
e Press C or c to select Home or Store. For normal
home use, select Home.
f Press OK.
USB Port Setup screen will appear depending on
country/area.
g Press OK, and the TV Mounting screen will appear,
press
C or c to select Stand or Wall.
TV Mounting
If you are mounting the TV on a wall please select [Wall].
[Stand] is recommended for other uses.
This setting may be modified later under Sound Navi in the
Sound menu.
Stand
h Press OK, and the AutoView screen will appear, press
C or c to select Yes or No.
i Press OK. If the Ant/Cable/Satellite screen appears,
press
B or b to select Antenna, Cable or Satellite
and press OK to check ( ).
If DVB-C is not supported in your area, Cable will not
be displayed.
• When you select Antenna or Cable, follow steps 10
to 13.
• When you select Satellite, skip to step 14.
• When you select Antenna (or Cable) and Satellite,
the Satellite Settings startup screen will appear
automatically after completing the Antenna (or
Cable) scan and pressing OK.
j Select Next and press OK. The Auto Tuning start up
screen will appear with the option to select between
DTV and ATV, DTV or ATV if available. Use
select the appropriate mode.
k Press B or b to highlight Start Scan and press OK.
The television will start to search for available DTV
and/or ATV channels. The progress bar will indicate
the scan status.
You must allow the television to complete the
search.
When the search is complete, the television will
automatically select position one.
The Auto Tuning screen will display the total number
of services found.
NOTE: If there are multiple channels with the same
channel number, a confirmation window will appear.
C or c to select the one you prefer.
Press
18
C or c to
l Press C or c to view the DTV (digital channel) or ATV
SatelliteNo. Dish LNB
ASTRA 19.2˚E
Satellite Settings
1
4
3
2
11
Transponder : 1/83 (10743 MHz)
Dish Type : Fixed
Lower LOF (MHz) : 9600
Upper LOF (MHz) : 10600
Switch Type
None
LNB Power
On
Done
Positioning
Signal Level 30%
Go to Stored Position
Store Position
Transponder
1/83 (10743 MHz H)
Positioning
WE
Go to 0
Satellite : ASTRA 19.2°E
Step Size
1
PLEASE NOTE
Auto Tuning - Satellite
Start Scan
Satellite
Free to Air
ASTRA(19.2°E)
Scan Option
(analogue channel) lists.
m Press B or b to move through the list to select a
channel and press OK to view.
In ATV mode, some areas may receive duplicate
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using ATV Manual Tuning.
REMEMBER: Press TV at any time to select between
ATV and DTV (DTV Ant TV/Radio/Text, DTV Cable TV/
Radio/Text, DTV Sat TV/Radio/Text if available)
modes.
NOTE: The time will be set automatically by
transmission but can be advanced or decreased by
using Local Time Setting in the DTV Settings screen.
n Select Next and press OK. The Satellite Settings
screen will appear. From this window, you can add the
satellites that you wish to tune and configure detailed
settings for each one individually. See “Satellite
Settings” on page 20.
SETTING UP YOUR TV
B or b to highlight Store Position and press
Press
OK to store the dish position. Repeat steps 14 and 15
for the next satellite as necessary.
If your satellite dish is not movable, the Positioning
screen will not appear.
Adjust the dish position manually for the maximum
Signal Level strength.
Highlight Done and press OK.
p If the reception testing completes successfully, the
Auto Tuning startup screen will display.
You can select Scan Option from Free to Air and All.
q Press B or b to highlight Start Scan and press OK.
The television will start to search for available DVB-S
channels. The progress bar will indicate the scan
status.
When the search is complete, the Auto Tuning results
screen will display the total number of services found.
r Press B or b to move through the list to select a
channel and press OK to view.
English
Highlight Done and press OK.
o If your satellite dish is movable, the following
Positioning screen will appear.
B or b to highlight Positioning and press C or
Press
c to find the dish position with the strongest signal
level.
The Quick Setup menu can also be accessed at any
time from the Setup/System Setup menu.
Ant/Cable/Satellite (if available)
From this menu, you can set the RF input configuration.
a Press MENU / C c to highlight Setup icon.
b Press B / C c to highlight System Setup icon.
c Press OK to display System Setup menu.
d Press B or b to select Ant/Cable/Satellite and press
C or c to select Antenna, Cable or Satellite.
NOTE: When you attempt to change the Ant/Cable/
Satellite setting, a warning message will appear
followed by PIN entry (if PIN has been set) and a
prompt for Auto Tuning.
19
SETTING UP YOUR TV
Auto Tuning
DTV and ATVTuning Mode
DTV
Quick ScanScan Type
AutoStart Frequency
AutoEnd Frequency
AutoModulation
AutoSymbol Rate
AutoNetwork ID
Start Scan
e When Ant/Cable/Satellite is set to Cable, the
English
following setting options will be provided in the Auto
Tuning screen.
Press
B or b to select an item and press C or c to
select your desired option.
With the exception of DTV Scan Type and DTV Modulation
items, all of the following items will have 2 operating modes.
The first is Auto where the values for each item are preset by
the system. The second is an Input mode where you will be
able to enter a single value in place of the pre-set value. If no
channel is currently tuned and the Input state is chosen, a
system default value will be shown. However, if a channel is
currently tuned when the item is accessed, the value of the
current channel will be displayed.
DTV Scan Type:
This item determines whether a Quick Scan or a Full Scan will
be executed.
The Quick Scan is a simplified version of the Full Scan that is
designed to complete in less time.
DTV Start Frequency:
This sets the frequency from which the scan will begin.
DTV End Frequency:
This sets the frequency at which the scan will end.
DTV Modulation:
You can choose from five QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
DTV Network ID:
This is the Network ID to be utilized for the scan. This item is
grayed out when DTV Scan Type is set to “Full Scan”.
Satellite Settings
From the System Setup menu, you can add the satellites that you
wish to tune and configure detailed settings for each one
individually.
To add a satellite:
a Press MENU / C c to highlight Setup icon.
b Press B / C c to highlight System Setup icon.
c Press OK to display System Setup menu.
d Press B or b to select Satellite Settings and press
OK.
Satellite Settings
Switch Type
LNB Power
Transponder : 1/83 (10743 MHz)
Dish Type : Fixed
Lower LOF (MHz) : 9600
Upper LOF (MHz) : 10600
SatelliteNo. Dish LNB
ASTRA 19.2˚E
1
2
3
4
Done
None
On
11
e Press b to highlight a new line to add an another
satellite and press OK.
f Press b until the required satellite is displayed and
press OK.
To delete a satellite:
a In the Satellite Settings menu, press B or b to select
the satellite you want to delete.
b Press the RED button. A confirmation window will
appear.
c Press C or c to select Yes and press OK.
NOTE: It is not possible to delete position No.1.
20
To edit the satellite settings:
ASTRA 19.2˚E
111
Transponder Settings
1 10743 H
Frequency Polarisation Symbol Rate S/S2
7 10861
8 10876
2 10773
3 10788
4 10817
5 10832
6 10847
H
V
H
V
V
H
V
22000
22000
22000
22000
22000
22000
22000
22000
S
S
S
S
S
S
S
S
Transponder Settings
76 12640 V
Frequency Polarisation Symbol Rate S/S2
82 12728
83
77 12662
78 12669
79 12692
80 12699
81 12721
V
H
V
H
V
H
22000
22000
22000
22000
22000
22000
22000
S
S
S
S
S
S
S
83 0 H0S
83 12731 H 22000 S2
a In the Satellite Settings menu, press B to highlight
Switch Type.
SETTING UP YOUR TV
English
To delete a transponder:
a In the Transponder Settings menu, press B or b to
highlight the line you want to delete.
b Press C or c to select None, ToneBurst, DiSEqC
2way or DiSEqC 4way as your satellite switch type.
c Press b to highlight LNB Power and press C or c to
select On or Off.
To add a transponder:
a In the Satellite Settings menu, press B or b to
highlight the line you want to edit and press OK.
b Press the GREEN button. The Transponder Settings
screen will appear.
c Press B to highlight a new line.
b Press the RED button.
To edit the Transponder Settings:
a In the Transponder Settings menu, press B or b to
highlight the line you want to edit and press OK.
b Press C or c to select Frequency, Polarisation,
Symbol Rate or S/S2, and set the item using the
number buttons if necessary.
c Press OK to save your settings.
d Repeat steps 1 through 3 for other lines.
e Press the BLUE button to finish editing and return to
Satellite Settings.
Press the GREEN but ton to c ancel any edi ts tha t were
made.
Press the YELLOW button to reset all transponder
settings to their initial default settings.
To select the Dish Type:
a In the Satellite Settings menu, press B or b to select
the required satellite line and press OK.
b Press C or c to highlight Dish and press the GREEN
button.
Dish Settings
Dish : 1
Dish Type
Fixed
d Press OK.
e Edit each parameter as required and press OK.
c Press C or c to select Dish Type. You can select
Movable or Fixed as the Dish Type.
21
SETTING UP YOUR TV
LNB Settings
Lower LOF
9750
LNB : 1
Upper LOF
10600
System Setup
Menu Language
English
Country
Ant/Cable/Satellite
Auto Tuning
ATV Manual Tuning
DTV Settings
DTV Manual Tuning
Satellite Settings
Germany
Auto Tuning
Previous settings will be lost! Press EXIT for no
change.
AllSatellite
Free to AirSearch Option
Start Scan
To select the LNB Settings:
English
a In the Satellite Settings menu, press B or b to select
the required satellite line and press OK.
b Press C or c to highlight LNB and press the GREEN
button.
c Press B or b to select Lower LOF or Upper LOF and
input the appropriate frequencies.
Auto Tuning
NOTE: As new services are broadcast, it will be necessary to
re-tune the television in order to view them.
Auto Tuning will completely re-tune the television and can be
used to update the channel list. It is recommended that Auto
Tuning is run periodically to ensure that all new services are
added. All current channels and settings, i.e. locked channels,
will be lost.
a Press MENU / C c to highlight Setup icon.
b Press B / C c to highlight System Setup icon.
c Press OK to display System Setup menu.
e For DTV/ATV Tuning:
A screen will appear warning that previous
programmes and settings will be deleted.
Auto Tuning
Previous settings will be lost!
Press EXIT for no change.
DTV and ATVTuning Mode
Start Scan
Press
C or c to select DTV and ATV, DTV or ATV, if
available, then highlight Start Scan and press OK to
continue with the Auto Tuning.
NOTE: If you have selected “Others” for the Country
field in the System Setup menu, and selected a
tuning mode other than “DTV” , choose the optimum
ATV broadcasting system (B/G, I, D/K or L).
The television will start to search for all available DTV
and/or ATV services.
You must allow the television to complete the
search.
When the search is complete, the Auto Tuning screen
will display the services found.
For Satellite Tuning:
A screen will appear warning that previous programmes
and settings will be deleted.
d Press B or b to select Auto Tuning and press OK.
Press B or b to highlight Satellite and press C or c to
select the desired satellite (No.1 Sat ~ No.4 Sat or
All).
You can select Free to Air or All as the Search Option.
Highlight Start Scan and press OK to continue with
the Auto Tuning.
When the search is complete, the Auto Tuning screen
will display the services found.
f Use B or b to move through the list to select a
channel and press OK to view.
22
SETTING UP YOUR TV
ATV Manual Tuning
System
1 A C 2 0 V C R
I
123 4 65 7 8 9
Pos. Channel Station
ATV Manual Tuning
1
2
3
4
6
7
8
C2
C7
S10
S40
C22
5
C25
C28
C30
ATV Manual Tuning
System
1 A C 2 0
I
ATV Manual Tuning
Search
1 C 2 0 IA
English
ATV Manual Tuning
Tuning
The television can be tuned-in manually using ATV Manual
Tuning. For example, you might use the feature if the television
cannot be connected to a media recorder/decoder with a SCART
lead or when you want to tune-in a station on another System.
C and c to move across the screen and select any of the
Use
ATV Manual Tuning options. Then use
settings.
1 Position
The number to be pressed on the remote control to tune
the channel.
2 System
Specific to certain areas.
3 Colour System
Factory set to Auto, should only be changed if problems
are experienced, i.e. NTSC input from external source.
4 Skip
Set Skip to On (
8) or Off (() for the selected channel.
See page 24.
5 Signal Class
The channel classification.
6 Channel
The channel number on which a station is being
broadcast.
7 Search
Search up and down for a signal.
8 Manual Fine Tuning
Only used if interference/weak signal is experienced. See
page 92.
9 Station
Station identification. Use the
enter up to seven characters.
To allocate a position on the television for a decoder and
media recorder: turn the decoder on, insert a pre-recorded
film in the media recorder, press PLAY and manually tune.
B or b to adjust the
B b and C c buttons to
a In the System Setup menu, press b to select ATV
Manual Tuning and press OK.
System Setup
Menu Language
Country
Ant/Cable/Satellite
Satellite Settings
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
English
Germany
b Use B or b to select the desired position. We suggest
Pos. 0 for a media recorder.
Different Channel numbers may be displayed.
c Press OK to select. If the channel chosen for the media
recorder is set to skip, Skip should be removed before
storing.
d Press c to select System and press B or b to change
if required.
e Then press c to select Search.
f Press B or b to begin the search. The search symbol
will flash.
23
SETTING UP YOUR TV
PLEASE NOTE
ATV Manual Tuning
Station
1 A C 2 0 V C R I
Pos. Channel Station
ATV Manual Tuning
1
2
3
4
6
7
8
C2
C7
S10
S40 ABC1
ABC1C22
5
C25
C28
C30
ATV Manual Tuning
Skip: On
1 A C 2 0 I
g Each signal will show on the television. If it is not your
English
media recorder, press
search.
B or b again to restart the
h When your medi a recorde r signal is found, press c to
move along to Station. Use
the required characters, e.g. VCR.
B, b, C and c to put in
i Press OK to save.
j Repeat for each position you want to tune, or press
BACK to return to the list of channels and select the
next number to tune.
k Press EXIT when you have finished.
This television has direct channel entry if the
channel numbers are known.
Select the ATV Manual Tuning screen in Step 3.
Enter the Position number, the System, then C for
standard (terrestrial) channels or S for cable
channels and the Channel number. Press OK to
save.
Skip
To prevent certain channels from being viewed, positions can be
skipped.
a Select ATV Manual Tuning from the System Setup
menu.
b Use B or b to highlight the position to be skipped
and press OK to select.
d Use B or b to turn Skip on.
Press OK.
8 on the screen indicates a skipped position.
e Press BACK and repeat from Step 2 or press EXIT.
Each position has to be individually selected. To turn
Skip off, repeat the procedure for each position.
Skipped positions cannot be selected by P
or by the controls on the television but can still be
accessed by the number buttons on the remote
control.
U and Pu
Sorting positions
Channels may be moved and saved to the position of your
choice.
a Select ATV Manual Tuning from the System Setup
menu.
b With the list of channels showing, use B or b to
highlight the channel you want to move and press
ATV Manual Tuning
Pos. Channel Station
2
S10
3
C7
4
C40
5
C22
1
C2
6
C25
7
C28
8
C30
ABC1
ABC1
c Use B or b to move through the list to your preferred
position. As you do so, the other channels will move
to make room.
c.
c Press c to select Skip.
d Press C to save your move.
Repeat as necessary and press EXIT.
24
SETTING UP YOUR TV
DTV Manual Tuning
WEAK
Signal Strength
Quality
Channel
GOOD
Start Scan
STRONGAVERAGE
13
Pos.New TypeName
ABC ONE
0 New Channels - Total 6
ABC TWO
ABC THREE
ABC NEWS 24
DTV Manual Tuning
2
1
7
40
ABCi
51
DTV Manual Tuning - Satellite
WEAK
Signal Strength
Quality
Satellite
POOR
Start Scan
STRONGAVERAGE
ASTRA 28.2°E
Transponder
1/83
Frequency
10714 MHz
Symbol Rate
22000 KS/s
Polarisation
H
Search Option
Free to Air
English
DTV Manual Tuning
NOTE: The content of this menu varies depending on the DTV
input (Antenna, Cable, or Satellite) that is currently selected.
Manual Tuning
This feature is available for service engineers or can be used for
direct channel entry if the multiplex channel is known.
a Select DTV Manual Tuning from the System Setup
menu and press OK.
b Enter the multiplex number using the number
buttons or use
down.
c Highlight Start Scan and press OK. The television will
automatically search for that multiplex.
C or c to adjust the number up or
Manual Tuning for DVB-C
When Ant/Cable/Satellite is set to Cable, DTV Manual
Tuning items are as follows:
Frequency – input a specific frequency to be scanned
Modulation – choose from one of five QAM modulation
options
Symbol Rate – in put a sp ecifi c baud r ate (K S/s) to be use d for
the manual scan
Highlight Start Scan and press OK.
Manual Tuning for DVB-S
When Ant/Cable/Satellite is set to Satellite, DTV Manual
Tuning items are as follows:
Press
B or b to highlight an item (Satellite, Transponder,
Frequency, Symbol Rate, Polarisation or Search Option)
C or c to select the required option.
and press
Highlight Start Scan and press OK.
When the multiplex is found, any channels that are
not currently in the channel list will be added and the
channel information at the top of the screen will be
updated.
d Repeat as necessary. Press EXIT to finish.
25
SETTING UP YOUR TV
DTV Settings
Channels
Parental PIN Setup
Subtitle and Audio
Parental Control
Local Time Setting
DVB Character Set
Dynamic Scan
Standby Channel Update
Standard
Off
On
Channels
Line No. 1/10
Sort : A-Z Sort
TV
1 ABC ONE
2 ABC TWO
Pos. Name
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
822 AA
823 AC
ABC ONE
Pos.
----
Name
Sorting Type Number
Sort
Sort
DTV Settings
English
Channels (Antenna/Cable)
The channel order may be changed to suit your personal
preference.
a Select DTV Settings from the System Setup menu
and press OK.
b Select Channels and press OK.
c Fo r you r co nve nien ce, you can j ump to sp eci fic pla ces
in the list by one of two methods.
Move — Press the GREEN button to activate the
Move feature. Press the
channel you wish to move and press OK to check.
If you wish to move multiple channels at once, select
another channel and check in the same way. Repeat
as necessary.
Once all desired channels have been checked, press
the
B or b buttons to place the focus at the position
to which you wish to move the channels. The
channels will be inserted above the highlighted
channel. Press the GREEN button to execute the
move.
Channels
Line No. 1/10
Pos. Name
1 ABC ONE
2 ABC TWO
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
822 AA
823 AC
B or b buttons to select the
TV
Sort : A-Z Sort
Sort — Press the YELLOW button. A confirmation
window will appear. Press
press OK.
Sort
Your existing channel order will be lost. Do you wish to
continue?
The Sorting Type selection window will appear.
C or c to select Yes and
Yes
Line Number Jump —Use the number buttons
(0-9) to input the line number you want to select and
press OK.
Name Jump —Press CC or cc to jump to the
next station name with a different initial letter.
It is also possible to change the Position number of a
particular channel.
Renumber — Press the RED button to renumber
the highlighted channel. Edit the channel number
using the number buttons and press OK. If the
position number you input already exists, a
confirmation window will appear.
26
C or c to set the sorting type.
Press
A-Z Sort Station name order (A to Z)
Number Position No. order (numerical sequence)
Press
b to highlight Sort and press OK.
Channels (Satellite)
Channels
Line No. 3/1200
Satellite TV
1 DDD 19.2°E
Pos. Station Satellite
822 AA
823 AC
2AB
3E
801 BBC
802 BB
803 BA
25.6°E
25.6°E
19.2°E
19.2°E
22.5°E
22.5°E
22.5°E
Group By Satellite
Sorting Type Number
Preset Order Yes
Sort
Sort
a Select DTV Settings from the System Setup menu
and press OK.
b Select Channels and press OK.
The satellite channel list will appear.
c For your convenience, you can edit and sort your
channel list.
Line Number Jump — Press the number buttons
(0-9) to input the line number you want to select and
press OK.
Station Letter Jump — Press CC or cc to jump
to the next station name with a different initial letter.
Satellite Jump —Press Z or z to jump to the
next channel on a different Satellite.
Renumber — Same as Antenna/Cable channels.
See page 26.
Move — Same as Antenna/Cable channels. See
page 26.
Sort — Press the YELLOW button. A confirmation
window will appear. Press
press OK.
The Sort menu will appear.
C or c to select Yes and
SETTING UP YOUR TV
Group —Press C or
Sorting Type — Press C or
A - Z Sort Station name order (A to Z)
Number Position No. order (numerical
Preset Order — Press C or
This item is displayed when Country is set to
Germany, and only applies to the Astra 19.2°E
satellite.
b to highlight Sort and press OK.
Press
c to select All or By Satellite.
c to set the sorting type.
sequence)
c to set Yes or No.
Standby Channel Update
If the Standby Channel Update is set to On, when the TV is in
standby mode, Digital Tuning is automatically executed and any
new channels are saved.
a Select DTV Settings from the System Setup menu
and press OK.
b Press b to select Standby Channel Update and
press
C or c to select On.
DVB Character Set
This feature allows you to manually select the character set
(Standard = Table 0, West = Table 5 or Latin alphabet 9) to
be used for DVB-C or DVB-T channels.
a Select DTV Settings from the System Setup menu
and press OK.
b Press b to select DVB Character Set and press C or
c to select Standard, West or Latin alphabet 9.
Dynamic Scan
If the broadcast information has changed in your DVB-T
receiving area, the TV screen will display the message
“Broadcast information has changed. Would you like to
rescan now?”. Select Yes or No. If you do not wish for the TV to
detect changes and prompt you to rescan, you shou ld set this
feature to “Off”.
a Select DTV Settings from the System Setup menu
and press OK.
English
b Press b to select Dynamic Scan and press C or c to
select On.
27
SETTING UP YOUR TV
English
You can select either Home or Store mode. Home is
recommended for normal home use. Select Store when using
Location setting
the television for displaying in a shop, etc.
a Select Location from the System Setup menu.
b Press C or c to select Home or Store.
Analogue switch-off
This is a digital television which is integrated to allow the use
of both digital and analogue services. However, during the
lifetime of this set it is very likely that analogue services will
be switched off to allow for more new digital services.
This ‘switch-off’ will happen in a number of phases, which will
be advertised in your area well in advance. It is recommended
that at each phase the television is re-tuned to ensure that
existing and new digital services can be viewed without
disruption.
28
CONTROLS AND FEATURES
50
Quick Menu
Picture Size
Picture Mode AutoView
Super Live
More Information
Personal Mode
Sleep Timer
Channel Options
TV Speakers
Headphone Level
REGZA-LINK Device Control
Wireless Information
BBC iPlayer
Speakers
00:00
Menu Example (UL series)
English
General controls
Quick Menu
Quick Menu helps you access some options quickly, such as
Picture Mode, Picture Size, Personal Mode, More
Information, Sleep Timer etc.
Press QUICK to display the Quick Menu and use
select the option.
NOTE: Quick Menu items are different depending on the
current mode.
Quick menu item example
Mode Quick menu item Description
When viewing a TV
programme or
pictures from the
external input
When using EPG Genre Colour See page 76.
Media Player
(Photo Multi View,
List View)
Picture Mode See page 34.
Picture Size See page 32.
Personal Mode See page 85.
More Information See page 75.
Channel Options See page 78.
BBC iPlayer See page 59.
Sleep Timer See page 74.
REGZA-LINK Device
Control
Speakers See page 88.
Headphone Level See page 31.
Wireless Information See page 45.
EPG Update/
Cancel EPG Update
Sort See page 66.
Interval Time See page 65.
Repeat See page 65.
Shuffle See page 69.
Device Information See page 66.
Wireless Information See page 45.
B or b to
See page 89.
See page 76.
Mode Quick menu item Description
Photo Frame
(Full Screen)
Picture See page 34.
Picture Size See page 32.
Personal Mode See page 85.
Selecting channels
To select a channel, use the numbered buttons on the remote
control.
Channels can also be selected using P
To display on-screen information such as channel, input
mode or stereo/mono signal, press . Press again to
cancel.
U and Pu.
The Time Display – analogue only
The time display facility allows the current (text service) time to
Press
to see the time display from the broadcaster. It will remain on
screen for about 5 seconds.
NOTE: This display may not be available in some cases.
be seen on the television screen.
D whilst watching a normal television broadcast
Stereo and Bilingual transmissions
For DTV programmes
For ste reo or d ual m ono bro adc asts , pr ess s and use C or
c to select settings.
Mode Display Pressing c
Stereo Stereo S Left S Right
Dual mono Dual 1
Mono –
Multichannel –
For multi-audio track broadcasts, press
change the audio language (see “Audio languages” on
page 79).
S Dual 2 S Dual
s repeatedly to
For ATV programmes
If stereo or dual language broadcasts are transmitted, the
word Stereo or Dual will appear on the screen each time
positions are changed, disappearing after a few seconds. If
the broadcast is not in stereo, the word Mono will appear.
Stereo… Press
Bilingual… Bilingual transmissions are rare. If they are
transmitted, the word Dual will be displayed. Choose the
required programme number, and if the word Dual appears,
press
s to select Stereo or Mono.
s to select Dual 1, Dual 2 or Mono.
29
CONTROLS AND FEATURES
Sound
Dual
Balance
Advanced Sound Settings
Audio Level Offset
Headphone Settings
Audio Description
0
Dual 1
Dolby Volume Low
Dynamic Range Control Off
Surround Off
Voice Enhancement
Sound Navi
On
Advanced Sound Settings
Surround Off
Voice Enhancement
Sound Navi
On
Advanced Sound Settings
Sound controls
English
Volume controls and sound mute
Volume
y or Y to adjust the volume.
Press
Sound Mute
Press once to turn the sound off and again to cancel.
Dual
If a programme or film is being broadcast with a soundtrack in
more than one language, the Dual feature allows selection
between them.
a Press MENU / C c to highlight Setup icon.
b Press B / C c to highlight Sound icon and press OK.
c Press B or b to select Dual and press C or c to
choose between Dual 1 or Dual 2.
c Press C or c to select either Stand or Wall depending
on how your TV is installed and press the RED button.
d Press C or c to select the frequency range you want
to adjust from the equalizer window and press
b to adjust the level.
Sound Navi
TV Mounting Stand
+20
0
-20
Equalizer
100 330 1K 3.3K 10K [Hz]
21012[Level]
B or
e Repeat step 4 for other frequencies.
Surround Settings
Surround and Voice Enhancement help to create an
enhanced surround sound experience with deep, rich bass from
stereo sound sources. Your TV’s audio will sound fuller, richer,
and wider.
a In the Sound menu, press B or b to select Advanced
Sound Settings and press OK.
b Press B or b to select Surround and press C or c to
select Off, Spatial or Cinema.
Balance
a In the Sound menu, press B or b to select Balance
and press
C or c to emphasize left or right speaker
balance.
Sound Navi
You can customize current sound mode settings. Select the
appropriate mode in accordance with the installation location of
the TV (Stand or Wall) and adjust the equalizer on-screen as
desired.
a In the Sound menu, press B or b to select Advanced
Sound Settings and press OK.
b Press B or b to select Sound Navi and press OK.
Dolby Volume®
This feature provides a consistent sound volume regardless of
programmes, channels or input sources.
a In the Sound menu, press B or b to select Dolby
Volume.
b Press C or c to select Low, High or Off.
NOTE:
•The Dolby Volume setting influences the Dynamic Range
Control and Digital Audio Output settings.
• This feature will automatically switch Off when Dynamic
Range Control is set to On or Digital Audio Output is set
to Auto.
30
Loading...