Toshiba T-02D User Guide

T-02D
INSTRUCTION MANUAL
’12.7
Thank you for purchasing "T-02D" mobile terminal.
Introduction
Before using your terminal, or when necessary, read this manual to ensure safe use and handling.

Learning operations

"Quick Start Guide" (in Japanese only)
This manual provides information about screens and operations of basic functions.
"Instruction Manual" (installed in the terminal)
This manual provides information and operations of all the functions.
<Operation steps>
[Instruction Manual]→Select a search method
If you delete "Instruction Manual", you can access Google Play from Play Store to download again.
<Operation steps>
Store]→Search "Instruction Manual" to select "Instruction Manual"→[Download]
This manual provides information and operations of all the functions.
From PC〉 http://www.nttdocomo.co.jp/english/support/
trouble/manual/download/index.html *You can download the latest information.
(in Japanese only)
From the Application menu,
From the Application menu, [Play
"Instruction manual" (PDF file)

Viewing this manual

In this manual, "T-02D" mobile terminal is usually referred to as "the terminal".
The images or illustration used in this manual are examples. They may differ from the actual displays.
In this manual, explanations and screen images for docomo Palette UI as Home application are provided.
In this manual, "authenticate" indicates the operating procedure for entering security code or performing fingerprint authentication depending on functions.
Unauthorized copying of parts of or this entire manual is prohibited.
The contents in this manual, URL and contents are subject to change without prior notice.

Basic package

■T-02
D (including warranty)
Battery Pack F
25
Back Cover T
Quick start guide (Japanese)
microSDHC card (16GB)(sample)
(with manual)
* Attached to the terminal at the time of purchase
06
AC Adapte r F06 (with warranty)
<AC adapter> <microUSB cable>
Earphone conversion cable with antenna (sample)
(with manual)
Other options→P145
1
Desktop Holder F

Contents/Precautions

38

Contents

Basic package ....................................................1
Before using the terminal .....................................
Precautions (Always follow these directions) ....
Handling precautions ......................................14
Waterproofness/Dustproofness ..................... 19
Before using the terminal ....... 24
Part names and functions........................................ 24
docomo mini UIM card............................................ 25
microSD card............................................................ 26
Battery pack .............................................................. 27
Charging ................................................................... 29
Turning power ON/OFF ........................................... 31
Basic operation......................................................... 32
Initial setting ............................................................. 33
Screen/Icon ............................................................... 34
Character entry......................................................... 38
Settings................................... 59
4
Setting menu.............................................................59
5
Wireless & networks.................................................61
Sound and Vibration.................................................68
Display .......................................................................70
Multimedia ................................................................72
Storage ......................................................................73
NX!eco .......................................................................73
Applications...............................................................74
Accounts & sync .......................................................75
Lock/Security .............................................................76
Setting my body........................................................86
Slide-in launcher .......................................................87
Language & input .....................................................87
Date & time................................................................88
Accessibility...............................................................88
About phone..............................................................88
docomo Palette UI .................. 46
Home screen............................................................. 46
Application screen ................................................... 47
Calling..................................... 51
Making a call............................................................. 51
Receiving a call......................................................... 53
Operation during a call............................................ 53
Recent calls............................................................... 54
Call settings/Others.................................................. 55
Phonebook................................................................ 55
Mail/Browser ........................... 89
sp-mode mail ............................................................89
SMS............................................................................89
Email ..........................................................................91
Gmail..........................................................................94
Early warning "Area Mail"........................................94
Google Talk ...............................................................95
Browser......................................................................95
2
Contents/Precautions
File management..................... 99
Infrared communication.......................................... 99
Bluetooth
Connecting an external device.............................. 103
Linking with DLNA device ..................................... 105
communication .................................. 100
Applications.......................... 108
dmenu ..................................................................... 108
dmarket ................................................................... 108
Play Store................................................................ 108
Osaifu-Keitai ........................................................... 110
Mobacas.................................................................. 112
1Seg ........................................................................ 115
Camera.................................................................... 122
Gallery..................................................................... 127
Media Player........................................................... 128
YouTube.................................................................. 129
GPS/Navigation ...................................................... 130
Calendar.................................................................. 133
AlarmClock ............................................................. 134
Calculator................................................................ 134
Electronic dictionary .............................................. 135
Search ..................................................................... 136
Document Viewer................................................... 136
SD card backup ...................................................... 137
Health Diary
Karada Life
〜 ....................................
138
International roaming ........... 139
Outline of international roaming (WORLD WING)
..................................................................................139
Available service overseas.....................................139
Before using the terminal overseas ......................139
Settings for overseas use.......................................141
Making/Receiving a call in the country you stay..142
Setting international roaming................................143
After returning to Japan.........................................144
Appendix/Index ..................... 145
Options and related devices ..................................145
Troubleshooting (FAQ)...........................................145
Smartphone Anshin Remote Support...................151
Resetting the terminal ............................................151
Warranty and After-Sales Service .........................152
Software update......................................................153
Main specifications.................................................157
Specific Absorption Rate (SAR) of Mobile Phones
..................................................................................159
Export Administration Regulations....................... 162
Intellectual Property Right......................................162
SIM unlock...............................................................166
Index ........................................................................167
3
Contents/Precautions

Before using the terminal

This terminal supports LTE, W-CDMA, GSM/GPRS, Wireless LAN System.
Because your terminal uses wireless transmission, it may not function in locations where it is difficult for radio waves to penetrate, such as tunnels, underground passages and some buildings, in areas where radio waves are weak, or out of Xi and FOMA service area. Even when you are high up in a tall building or condominium and nothing blocks your view outside, your terminal may not be able to receive or transmit signals. Also, communication may be interrupted even when there are strong radio waves with 4 signal status icons on the terminal and you are not moving (traveling).
Because your terminal uses radio waves to communicate, it is possible that a third party may attempt to tap your calls. However, the LTE, W-CDMA, GSM/GPRS automatically applies a confidential communication function to all calls, so even if a third party could somehow tap a call, they only hear noise.
Your terminal encodes voice communication as digital data. When you are operating your terminal while moving to a location subject to weaker radio wave conditions, the transmitted digital data may not be correctly decoded and as a result the decoded voice may differ somewhat from the actual voice.
Maintain a separate record of the data (Phonebook, Schedule, Memo, etc.) you saved in the terminal. Note that DOCOMO assumes no responsibility for any loss of saved contents of data resulting from malfunction, repair, changing of the model or other handling of the terminal.
In the terminal, as it is for a PC, some applications that you install may give instability of the operation, or may send your location information or personal information registered to the terminal to outside via the Internet and the information may be used improperly. Please thoroughly check a provider and operation status of the application etc. which you want to use beforehand and then use it.
You are recommended to save important data to microSD card or a PC.
This terminal supports Xi Area, FOMA Plus-Area and FOMA HIGH-SPEED Area.
The terminal does not support i-mode sites (programs) or i-αppli.
Google applications and service contents are subject to change without prior notice.
The terminal automatically performs communication for some functions, for example, to synchronize data, check the latest software or maintain connection with the server. If you transmit a large amount of data such as downloading applications or watching video, a packet communication charge becomes high. Subscription of packet flat-rate service is highly recommended.
Even in Manner mode, shutter sound, auto focus lock sound for camera shooting, and count down sound for self timer are emitted.
The software on the terminal can be updated with the latest information.→P153
Improving the terminals quality or upgrading operation system may be included in the software update. And some applications used in the previous version may not be available or some unintended bugs may occur after software update.
When the memory of the microSD card or the terminal is almost full, running application may not operate normally. In this case, delete saved data.
Set the screen lock to ensure the security of your terminal for its loss.→P77
For the information on the services provided by Google, refer to the terms of use for Google Inc. And for the details on other web services, read terms of use for each service.
4
Contents/Precautions
You can use the terminal only with docomo mini UIM card. If you have a UIM or FOMA card, bring it to a docomo Shop to replace.
If your terminal is lost, change your each account password using a PC to prevent other persons from using Google services such as Google Talk, Gmail, Google Play, etc. and Twitter.
The terminal supports only sp-mode, mopera U and Business mopera Internet (VPN setting is limited only to PPTP). Other providers are not supported.
To use tethering, a subscription to sp-mode is required.
Packet communication charge when using tethering varies depending on the charging plan you use. Subscription of packet flat-rate service is highly recommended.
As mobacas is a service using communications, using the service incurs packet communication charge. Subscription of packet flat-rate service is recommended.
For details on usage fee, refer to http:// www.nttdocomo.co.jp/english/.

Precautions (Always follow these directions)

Before using your terminal, or when necessary, read the precautions below to ensure safe use and handling. After reading this manual, keep it carefully.
These precautions are intended to protect you and others around you. Read and follow them carefully to avoid injury, damage to the product or damage to property.
The signs below differentiate between the levels of danger that can occur if the product is not used within the specified guidelines.
This sign denotes that death or serious injury may directly
DANGER
WARNING
CAUTION
result from improper use.
This sign denotes that death or serious injury may result from improper use.
This sign denotes that minor injury or damage to property may result from improper use.
5
Contents/Precautions
The symbols below show specific directions.
This symbol denotes that the action is prohibited.
Don’t
This symbol denotes that disassembling the phone or its components is not allowed.
No disassembl y
This symbol denotes that using the phone or its components in a bathroom or other
No liquids
highly humid area is not allowed.
This symbol denotes that using the phone or its components with wet hands is not
No wet hands
allowed.
This symbol denotes that an instruction must be obeyed at all times.
Do
This symbol denotes that the equipment should be unplugged.
Unplug
Precautions contain the description below.
Handling the terminal, battery pack, adapter, desktop
holder and docomo mini UIM card (common) ..............6
Handling the terminal ..........................................................8
Handling battery pack .......................................................... 9
Handling adapter and desktop holder .............................. 10
Handling docomo mini UIM card...................................... 11
Handling mobile phones near electronic medical
equipment ....................................................................... 11
Material list .........................................................................12
Handling the terminal, battery pack, adapter, desktop holder and docomo mini UIM card (common)
DANGER
Do not use, store or leave the terminal in hot places (e.g. by the fire, near a heater, under a kotatsu, in direct sunlight, in a car in the hot
Don’t
sun).
May cause fire, burns or injuries.
Do not put the terminal into heating cooking device such as microwave oven or high­pressure container.
Don’t
May cause fire, burns, injuries, electric shock.
Do not disassemble or remodel the equipment.
May cause fire, burns, injuries, electric shock.
No disassembl y
Do not let the terminal get wet with water, drinking water, urine of pet animals, etc.
May cause fire, burns, injuries, electric shock.
No liquids
For waterproofness, refer to the page.
Use the battery pack and adapter specified by NTT DOCOMO for your terminal.
May cause fire, burns, injuries, electric shock.
Do
P19
6
Contents/Precautions
WARNING
Do not throw the equipment or give a strong force or hard shock to it.
May cause fire, burns, injuries, electric shock.
Don’t
Keep conductive materials (metal pieces, pencil lead, etc.) from coming in contact with the charging jack or external connection jack.
Don’t
Do not put those materials inside the terminal.
May cause fire, burns, injuries, electric shock.
Do not cover or wrap the terminal with a blanket, etc while using or charging.
May cause fire or burns.
Don’t
Turn the terminal OFF and stop charging before entering a place such as a gas station
Do
where flammable gases are generated.
The gas may catch fire. When using Osaifu-Keitai in a place as a gas station, turn OFF the terminal before using it. (When Osaifu-Keitai lock is activated, deactivate it before turning OFF the terminal.)
If the equipment starts giving off a strange smell, overheats, becomes discolored or
Do
deformed during use, charging or in storage, immediately perform the following operations.
Remove the power plug from the wall outlet or cigarette lighter socket.
Turn the terminal OFF.
Remove the battery pack from the terminal.
May cause fire, burns, injuries, electric shock.
CAUTION
Do not leave the equipment on unstable or sloping surfaces.
May cause injuries.
Don’t
Do not store the equipment in extremely humid, dusty or hot areas.
May cause fire, burns, electric shock.
Don’t
Children using the equipment should be instructed in proper operation by an adult. Do
Do
not allow them to use the equipment without adult supervision.
May cause injuries.
Store the equipment out of reach of small children.
May be accidentally swallowed or cause injuries.
Do
Be careful especially when using the terminal connected to the adapter continuously for a
Do
long time.
If you use applications, call or watch 1Seg while charging the battery for a long time, the term inal, battery pack and adapter may be heated. Directly touching a hot part for a long time, you may have redness, itching or rash on your skin, or it may result in low-temperature burns depending on your constitution and/or health condition.
7
Contents/Precautions
Handling the terminal
WARNING
Do not direct the infrared data port toward your eye and transmit signals.
May cause harmful effect on eyes.
Don’t
Do not direct the infrared data port toward home electric appliances etc. equipped with infrared device when using infrared
Don’t
communication.
May cause an accident because of malfunction of infrared device.
Do not turn on the light by getting the lighting part closer to other person's eyes. When shooting infants, keep at least 1 m
Don’t
away from the object.
May impair eyesight. And may cause accidents like injury etc., by dazzling or astounding other people.
Do not put foreign objects such as liquid like water, metal pieces or burnable things into docomo mini UIM card slot or microSD card
Don’t
slot.
May cause fire, burns, injuries, electric shock.
Do not turn on the light aiming directly at the driver of the car etc.
May disturb driving and cause an accident.
Don’t
Turn the terminal OFF in areas where use is prohibited, such as in airplanes and hospitals.
May cause electronic equipment or electronic medical
Do
equipment to fail or malfunction. When using the phone in a medical facility, be sure to observe the regulations of the facility. If you do prohibited act such as using the phon e in an airplane, you will be punished according to law. If usage of the terminal in an aircraft is admitted by setting airplane mode, etc., use the terminal under the direction of the airline.
When you talk by setting handsfree or ring alert is sounding, keep the terminal away
Do
from your ear. And, when connecting the earphone/ microphone etc. to the terminal and play a game or music, adjust the volume moderately.
Too loud volume may cause a hearing loss. And, if you cannot hear the sound around you clearly, it may cause an accident.
If you have weak heart, be careful when setting the incoming vibrate alert (vibration)
Do
or alert volume setting.
May cause harmful effect on heart.
When you use electronic medical equipment, check with the equipment manufacturer to
Do
determine how the device is affected by radio waves before using.
May cause harmful effect on electronic medical equipment etc.
Turn the terminal OFF near high-precision electronic control equipment or electronic
Do
equipment using low-power signals.
May cause the equipment to fail or malfunction.
Examples of electronic equipment t o avoid.
*
Hearing aids, implanted pacemakers or defibrillators, other electronic medical equipment, fire alarms, automatic doors and other automatic control e quipment. Users wearing implanted pacemakers or defibrillators or other electronic medical e quipment should check with the manufacturer or sales outlet about t he effect of radio frequencies on the equipment.
When the display is accidentally broken, be careful of broken glass or exposed internal
Do
parts of the terminal.
Surfaces of display is made of hardened glass, however, if you mistakenly touch broken or exposed parts, you may be injured.
8
Contents/Precautions
CAUTION
Do not swing the terminal by the antenna, strap, etc.
May cause accident such as injury to yourself or
Don’t
others by hitting.
Do not use the damaged terminal.
May cause fire, burns, injuries, electric shock.
Don’t
When using the motion sensor, check the safety around you, hold the terminal firmly, and do not shake it unnecessarily.
Don’t
May cause accident such as injuries.
If the display part is accidentally broken and the liquid crystal leaks out, do not make the substance contact with your skin of face or
Don’t
hands.
May cause loss of sight or skin problems. If the liquid crystal gets into your eyes or mouth, rinse it with clean water and see a doctor immediately. And, if the liquid adheres to skin or clothing, use alcohol etc. to wipe it off, then wash with soap.
To use the terminal in car, check with automobile manufacturer or dealer to
Do
determine how the device is affected by radio waves before using.
In rare cases, using the phone in some vehicle models can cause the vehicle's electronic equipment to malfunction. In that case, stop using the terminal immediately.
The use of the terminal may cause itching, rashes, eczema, or other symptoms
Do
depending on the user's physical c ondition. If you develop skin problems, stop using the phone immediately, and see a doctor. "Material list (P12)"
Do
Handling battery pack
Check that the battery type matches the type displayed on the battery pack label.
Display Battery type
Li-ion 00 Li-ion battery
Don’t
Don’t
Don’t
Don’t
Do
When watching the display, take a certain distance from the display in a fully bright place.
May reduce visual acuity.
DANGER
Do not connect a wire or other metal objects to the jack. And, do not carry or store the terminal with objects like a metal necklace.
May cause battery pack to ignite, burst, heat or leak.
Check the orientation of the battery pack to attach to the terminal, and do not try to force the battery pack onto the terminal if you are having trouble attaching it.
May cause battery pack to ignite, burst, heat or leak.
Do not throw the battery pack into the fire.
May cause battery pack to ignite, burst, heat or leak.
Do not nail the battery pack, hit with a hammer or step on it.
May cause battery pack to ignite, burst, heat or leak.
If the battery pack's fluid etc. contacts eyes, immediately flush the eyes with clean water and see a doctor right away. Do not rub the eyes.
May cause loss of sight.
9
Contents/Precautions
WARNING
If the battery pack seems to have abnormalities such as deformation or scratches due to falling, never use it.
Don’t
May cause battery pack to ignite, burst, heat or leak.
If the battery pack leaks or gives off a strange smell, immediately remove it from the
Do
vicinity of open flames.
The vapors from leaking battery pack fluid may ignite or explode.
Be careful not to let your pet bite the battery pack.
May cause battery pack to ignite, burst, heat or leak.
Do
CAUTION
Do not discard old battery packs together with other garbage.
May cause igniting or environmental destruction.
Don’t
Tape the terminals of old battery packs to insulate them, and then bring them into a sales outlet such as docomo Shop. If your local municipality has a batte ry recycling program, dispose of them as provided for.
Do not use or charge a wet battery pack.
May cause battery pack to ignite, burst, heat or leak.
Don’t
If fluid etc. leaks out from the battery pack, do not make the fluid contact with your skin of
Do
face or hands.
May cause loss of sight or skin problems. If the fluid etc. put into your eyes or mouth, or contacts skin or clothes, immediately flush the contacted area with clean water. If the fluid etc. put into the eyes or mouth, immediately see a doctor after flushing.
Handling adapter and desktop holder
WARNING
Do not use the adapter cord if it gets damaged.
May cause fire, burns, electric shock.
Don’t
Do not use the AC adapter or desktop holder in a bathroom or other highly humid area.
May cause fire, burns, electric shock.
Don’t
Always use the DC adapter with a negative­ground vehicle. Do not plug it into a positive­ground vehicle.
Don’t
May cause fire, burns, electric shock.
When it starts to thunder, do not touch adapter.
May cause electric shock.
Don’t
Do not short the charging jack while it is connected to the outlet or cigarette lighter socket. Do not touch the charging jack with a
Don’t
part of your body such as your hand or finger.
May cause fire, burns, electric shock.
Do not place heavy objects on the adapter cord.
May cause fire, burns, electric shock.
Don’t
When you insert and remove the AC adapter from power outlet, do not contact a metal strap or other metal objects with the jack.
Don’t
May cause fire, burns, electric shock.
Do not touch the adapter cord, desktop holder or outlet with wet hands.
May cause fire, burns, electric shock.
No wet hands
10
Contents/Precautions
Only use with the specified power source and voltage. When charging the terminal
Do
overseas, use AC adapter for global use.
If incorrect voltage is used, this may cause fire, burns or electric shock. AC adapter : 100V AC DC adapter : 12V or 24V DC (specific for negative
ground vehicle)
AC adapter for global use : Between 100V and 240V AC
(Connect to the AC outlet for internal household use)
If the DC adapter's fuse blows, replace it only with the specified fuse.
May cause fire, burns , electric shock. For the specified
Do
fuse, see the instructions that come with the DC adapter.
Wipe off any dust that accumulates on the power plug.
May cause fire, burns, electric shock.
Do
When you connect the AC adapter to an outlet, firmly connect to the outlet.
May cause fire, burns, electric shock.
Do
When you disconnect the power plug from the outlet or cigarette lighter socket, do not
Do
pull the adapter cord with excessive force. Instead, hold the adapter to disconnect.
May cause fire, burns, electric shock.
Always remove the power plug from the outlet or cigarette lighter when not using the
Unplug
adapter for an extended period.
May cause fire, burns, electric shock.
Immediately remove the power plug from the outlet or cigarette lighter socket if water or
Unplug
other fluids get into the adapter.
May cause fire, burns, electric shock.
Always remove the power plug from the cigarette lighter socket when cleaning the
Unplug
equipment.
May cause fire, burns, electric shock.
Handling docomo mini UIM card
CAUTION
Be careful of the cut surface when removing docomo mini UIM card.
May cause injuries.
Do
Handling mobile phones near electronic medical equipment
These precautions are based on the guidelines produced at the Electromagnetic Compatibility Conference Japan, regarding the protection of electronic medical equipment from radio waves emitted by mobile phone units.
WARNING
Obey the following rules inside medical facilities.
Do not bring the terminal into operating rooms
Do
(ORs), intensive care units (ICUs) or coronary care units (CCUs).
Turn the terminal OFF in hospital wards.
Turn the terminal OFF in hospital lobbies and corridors if electronic medical equipment could be nearby.
If the medical facility has specified zones where use or possession of mobile devices is prohibited, obey those instructions.
Turn the terminal OFF in crowded trains or other public places where pacemaker or
Do
defibrillator wearers could be nearby.
The terminal's signals may affect the operation of implanted pacemakers or defibrillators, and other devices.
11
Contents/Precautions
Wearers of medical equipment such as implanted pacemakers or defibrillators must
Do
carry and use the terminal at least 22 cm away from the implanted device.
The terminal's signals may affect the performance of electronic medical equipment.
When electronic medical equipment other than implanted pacemakers or defibrillators
Do
are in use outside of medical facilities (such as in home care settings), check with the device manufacturer to determine how the device is affected by electrical signals.
The terminal's signals may affect the performance of electronic medical equipment.
Material list
Part Material
Display panel Hardened
Exterior case
Front key PC resin Acrylic UV
Front case PA+GF
Back case PC-GF resin Acrylic UV
Back cover PC-GF resin Acrylic UV
glass
resin
Surface
treatment
AF coating
Discontinuity evaporated
Acrylic UV curable coating
curable coating
curable coating
curable coating
TV/FM transmitter antenna
Out­camera panel
Side keys (Power key, Volume key)
External connection jack connector cap
Earphone cap
Charging jack
Acrylic UV curable coating
None
None
Nickel plating
Nickel plating
Hard coating
evaporated Acrylic UV curable coating
curable coating
Discontinuity
evaporated Acrylic UV curable coating
Discontinuity
evaporated Acrylic UV curable coating
Gold plating
Surface
treatment
Part Material
Antenna top section
Pipe section Stainless
Root flexure section
Root rotation part (top)
Root rotation section (bottom)
Window Acrylate
Ring PC resin Discontinuity
PC+ABS resin
steel
Nickel titanium alloy
Stainless steel
Stainless steel
resin
PC resin Acrylic UV
PC resin polyester elastomer resin
PC resin polyester elastomer resin
LCP resin Stainless steel
12
Contents/Precautions
Part Material
Fingerprint sensor
Battery pack
Exterior case
Charging jack
Rubber part PORON None
Case PPE xyron
Serial number label PET None
Sensor Flexible PC
Bezel Stainless
Body PC resin None
Label PET Black printed
Contacts Copper Gold plating
Desktop Holder F38
Part Material
Upper case ABS resin None
Lower case ABS resin None
Front hook POM resin None
Side hook POM resin None
Terminal lever
Contacts C5191W-H Gold plating
AC Adapter F06
Part Material
board
steel
POM resin None
340Z
treatment
None
Ti coating
letter
None
Surface
Surface
treatment
Surface
treatment
Part Material
AC plug Upper and
Power cable (coating, USB connector, microUSB connector)
Cord Styrene
Earphone jack
microUSB­B Plug
lower case
Plug PBT Toraycon
Blade Brass Nickel plating
Earphone adapter cable with antenna (sample)
Part Material
Cap Olefinic
Contact A Beryllium
Contact B Phosphorus
Cap Olefinic
Shell Stainless steel Nickel plating
Contact Phosphorus
Housing Nylon None
Latch Stainless steel None
PPE xyron 340Z
1184GA15
Flame resisting PVC
elastomer
elastomer
copper
bronze
elastomer
bronze
Surface
treatment
None
None
None
Surface
treatment
None
None
Gold plating
None
None
Gold plating
13
Contents/Precautions

Handling precautions

General
T-02D is waterproof/dustproof, however, do not allow
water or dust to seep into the terminal and do not allow
accessories or optional devices to get wet or attached
with dust.
- Battery pack, adapter, desktop holder, docomo mini UIM card are not waterproof/dustproof. Do not use in a bathroom or other highly humid area or do not let rain touch. Or putting the terminal on your body, humidity of sweat may cause internal corrosion and malfunction. Note that malfunctions, which are determined to be caused by water as result of inspections, are not covered by the warranty. Since these conditions are outside the scope of the warranty, a repair, if at all possible, is charged.
Clean the terminal with a dry soft cloth (such as a cloth for eyeglasses).
- Rubbing it roughly with a dry cloth may scratch the display.
- Drops of water or dirt left on the display may cause stains.
- If the terminal is wiped with alcohol, paint thinner, benzine or detergent, the printing may disappear or color may fade.
Clean the jack occasionally with a dry cotton swab etc.
- If the jack is soiled, connection gets worse and it may cause power to be turned off or insufficient battery charge, so clean the jack with a dry cotton swab etc. Also, be careful never to damage the jack when cleaning it.
Do not place the terminal near an air-conditioner outlet.
- The rapid change in temperature may cause condensation, causing internal corrosion and malfunction.
When using, be careful not to subject excessive force to the terminal or the battery.
- If the terminal is crammed into a brimming bag or placed in a pocket and sat on, display, internal PCBs or battery pack may be damaged or malfunction. And, if external devices are plugged into the external connection jack or the stereo earphone jack, the breakage of the connector or malfunction may result.
Do not rub or scrape the display with a metal piece etc.
- May scratch the display, causing malfunction or damage.
Carefully read the separate instructions that come with optional devices.
The terminal
Do not press the surface of the touch panel strongly or operate it with sharp objects such as a nail, a ballpoint pen and a pin.
- It may damage the touch panel.
Avoid extreme temperature.
- Use the terminal where the temperature ranges between 5 and 40℃ (limited to the temporary use in a bathroom etc. when temperature is above 36℃) and
humidity ranges between 45 and 85%.
The terminal may affect land-line phones, TVs or radios in use nearby, so use it as far as possible from these appliances.
Maintain a separate record of the data you saved in the terminal.
- If the data is deleted, DOCOMO assumes no responsibility for the loss of any data.
Do not drop the terminal or subject it to shocks.
- May cause malfunction or damage.
Do not plug external devices into the external connection jack or stereo earphone jack at a slant, or do not pull it forcibly while it is plugged.
- May cause malfunction or damage.
It is normal for the terminal to become warm during use or charging. Continue to use it.
14
Contents/Precautions
Do not leave the terminal with the camera in areas under strong direct sunlight.
- May cause discoloring or burn-in of elements.
Use the terminal with the external connection jack cap closed.
- Dust and/or water brought into the terminal cause troubles.
Do not use the terminal with the back cover removed.
- May cause removal of battery pack, malfunction or damage.
Do not give a strong impact on the fingerprint sensor or scratch the surface.
- It may cause not only malfunction of the fingerprint sensor but also disabling authentication.
Clean the fingerprint sensor with a dry soft cloth (such as a cloth for eyeglasses).
- When the fingerprint sensor is dirty or gets wet on the surface, it cannot read the fingerprint and may cause decrease the authentication performance or erroneous operation.
While microSD card is being used, do not take the card out and do not turn off the terminal.
- May cause data loss or malfunction.
Do not bring magnetic cards etc. close to the terminal.
- Magnetic data in cash cards, credit cards, telephone cards, floppy disks, etc. may be erased.
Do not bring magnetized objects close to the terminal.
- Bringing strong magnetism close may cause a malfunction.
Battery pack
The battery pack is a consumable part.
- Replace the battery pack if the terminal has extremely short operation time on a full charge, though it may vary by operating conditions. Purchase a new battery pack of the specified type.
Charge the battery in an area within the proper ambient temperature range (5-35℃).
The operation time provided by the battery pack varies by the operating environment and battery pack's deterioration.
The battery pack may swell out as it comes to near the end of its lifetime depending on the usage conditions, but it is not a problem.
Be careful especially about the following points when preserving the battery pack.
- Keeping under the state of the full charge (right after charging ends)
- Keeping under the state of the empty charge (too exhausted to turn on the terminal)
They may cause the battery pack performance to be degraded or its lifetime to be shortened. A recommended battery level to keep the battery pack is approximately 40% of remaining battery level as a guide.
Adapter
Charge the battery in an area within the proper ambient temperature range (5-35℃).
Do not charge the battery in the areas below.
- In areas of excessive humidity, dust or vibrations
- Near land-line phones or TVs/radios
It is normal for the adapter to become hot while charging. Continue to use it.
When using the DC adapter for charging, keep the vehicle engine running.
- The vehicle's battery could become flat.
When using an outlet with a mechanism preventing unplugging, follow the handling instructions for that outlet.
15
Contents/Precautions
Do not give strong shock. Do not deform the charging jack.
- May cause malfunction.
docomo mini UIM card
Do not use excessive force to install/remove docomo mini UIM card.
Note that DOCOMO assumes no responsibility for malfunctions occurring as the result of inserting and using docomo mini UIM card with another IC card reader/writer.
Always keep UIM ICs clean.
Clean docomo mini UIM card with a soft, dry cloth (such as a cloth for eyeglasses).
Maintain a separate record of the data you saved in docomo mini UIM card.
- If the data is deleted, DOCOMO assumes no responsibility for the loss of any data.
To preserve the environment, bring the old docomo mini UIM card to a sales outlet such as docomo Shop.
Take care not to scratch, touch accidentally or short IC.
- May cause data loss or malfunction.
Do not drop docomo mini UIM card or subject it to shocks.
- May cause malfunction.
Do not bend docomo mini UIM card or place heavy objects on it.
- May cause malfunction.
Do not install docomo mini UIM card into the terminal with a label or sticker put on.
- May cause malfunction.
Bluetooth devices
This terminal is equipped with the security features, that are compliant with Bluetooth standards for communication via Bluetooth. However, depending on the settings, there may not be enough security. Be aware of security risks when using Bluetooth.
DOCOMO assumes no responsibility for any information which may be leaked during communication via Bluetooth.
Frequency bands
Frequency bands used by the terminal Bluetooth function are as below.
abdc
2.4FH1
a
2.4 : Radio equipment that uses the 2400 MHz band.
b
FH : The modulation is the FH-SS method.
c
1 : The expected interference distance is 10 m or shorter.
d
and 2483.5 MHz are used, and the bandwidth used by mobile object identification devices cannot be
avoided. Available channel varies by countries. Use of Bluetooth is limited in some countries. Confirm regulations of the country/region to use it. To use in airplane, confirm with airline company in advance.
: All bandwidths between 2400 MHz
16
Contents/Precautions
Cautions on using Bluetooth devices
In the bandwidth used by this terminal, in addition to home electric appliances such as a microwave oven and industrial/scientific/medical devices, in-plant radio stations used to identify mobile objects used in production lines of a factory that require a license, specified low power radio stations, or amateur radio stations that do not require a license (hereafter "other radio stations") can be in operation.
1. Before using the terminal, check whether other radio stations are in operation in your neighborhood.
2. If radio wave interference occurs between the terminal and "other radio stations", use the terminal in a different location or "Turn the power OFF" to avoid the radio wave interference.
3. For details, contact "General Inquiries" on the last page of this manual.
Wireless LAN (WLAN)
Wireless LAN (WLAN) exchanges information using radio waves, and allows you to freely establish LAN connection if you are within an area where radio wave reaches. On the other side, if you communicate without appropriate security settings, communications may be intercepted or hacked by malicious parties. It is recommended to make necessary security settings on your judgement and responsibility.
Wireless LAN
Do not use wireless LAN in a place where magnetized by electric products, AV, OA equipment, etc. or where electromagnetic wave is generated.
- If magnetism or electrostatic noise affects the terminal,
noise may be increased or communication may not be available (especially when using microwave oven, it may affect the terminal).
- Using near TV or radio may cause poor reception or TV
screen may be blurred.
- When multiple wireless LAN access points exist near the terminal and they use the same channel, search may not be performed correctly.
Frequency bands
Frequency bands for WLAN devices are written on battery pack insert section of the terminal. Label description are as follows.
a bc
d
2.4DS/OF4
a
2.4 : Radio equipment that uses the 2400 MHz band.
b
DS : The modulation is the DS-SS method.
c
OF : The modulation is the OFDM method.
d
4 : The expected interference distance is 40 m or shorter.
e
and 2483.5 MHz are used, and the bandwidth used by
mobile object identification devices can be avoided. Using wireless LAN built-into the terminal in 5.2/5.3 GHz outside is prohibited by the Radio Law. Available channel varies by countries. To use WLAN overseas, check the conditions such as available frequency, regulation, etc. for the country. To use in airplane, confirm with airline company in advance.
e
: All bandwidths between 2400 MHz
17
Contents/Precautions
Notes on using wireless LAN (WLAN)
Wireless LAN (WLAN) function in the terminal uses
2.4 GHz and 5GHz frequency band. In the 2.4 GHz frequency band, in addition to home electric appliances such as a microwave oven and industrial/ scientific/medical devices, in-plant radio stations for identification of mobile objects used in production lines of a factory (a license is required), specified low power radio stations (a license is not required), or amateur radio stations (a license is required) can be in operation.
1. Before using this device, confirm that in-plant radio stations for identification of mobile objects, specified low power radio stations or amateur radio stations are not in operation in your neighborhood.
2. If this device generates harmful radio wave interference against in-plant radio stations for identification of mobile objects, change the using frequency promptly or stop using wireless LAN function, and contact "General Inquiries" on the last page of this manual, then consult about treatment for prevention of the interference (for example, installation of partitions etc.).
3. If this device generates harmful radio wave interference against in-plant radio stations for identification of mobile objects or amateur radio stations, or if any trouble, contact "General Inquiries" on the last page of this manual.
FeliCa reader/writer
FeliCa reader/writer function of the terminal uses weak waves requiring no licenses for radio stations.
It uses 13.56 MHz frequency band. When using other reader/writers in your surroundings, keep the terminal away sufficiently from them. Before using the FeliCa reader/writer, confirm that there are no radio stations using the same frequency band nearby.
FM transmitter
FM transmitter function of the terminal uses weak waves requiring no licenses for radio stations.
It uses 78.4 - 89.6MHz frequency band. To use it, set frequency not to common to FM radio station of the area you use so as to avoid affecting FM radio users in neighborhood.
CAUTION
Do not use a remodeled terminal. Using a remodeled terminal violates the Radio Law.
The terminal is certified according to technical standard conformance of specified wireless equipment based on the Radio Law, and as a proof of it, the "Technical Compliance Mark " is depicted on the engraved sticker of the terminal. If you remodel the terminal by removing its screws, your certification of technical standard conformance becomes invalid. Do not use the terminal with its certification of technical standard conformance invalid as it violates the Radio Law.
Be careful when you use the terminal while driving a car etc.
Using a mobile phone while driving is subject to penal regulations. However, absolutely necessary cases such as rescue of a sick person or maintaining public's safety are exempted.
Use FeliCa reader/writer function only in Japan.
FeliCa reader/writer function of the terminal conforms to Japanese radio standards. If you use this function overseas, you may be punished.
Use the FM transmitter only in Japan.
The FM transmitter of the terminal is compliant with wireless standards and is authorized for use only in Japan. If you use this function overseas, you may be punished.
Do not alter the basic software.
Repairs may be refused as a modification of software.
18
Contents/Precautions

Waterproofness/ Dustproofness

T-02D provides waterproofness of IPX5*1, IPX8*2 and dustproofness of IP5X*3 with firmly closing the external connection jack/stereo earphone jack cap and steadily installing the back cover.
*1
IPX5 means that a phone keeps functioning after applying a jet flow of 12.5 L/min. from every direction from a distance of approximately 3 m for at least 3 minutes using water nozzle in
6.3 mm inner diameter.
*2
For T-02D, IPX8 means that a phone keeps functioning after T-02D is slowly submerged to depth of 1.5 m in static tap water at room temperature, left there for 30 minutes and then taken out. (Camera function cannot be used under water.)
*3
IP5X means a protection degree that a phone keeps functioning and safety after it is placed in a device with dust in
diameter 75μ or less for 8 hours, agitated and then taken out.
What you can do with waterproofness of T-02D
You can talk and watch 1Seg without an umbrella in the rain (for rainfall of 20 mm or less per hour).
- When your hands or the terminal are wet, avoid installing/removing the back cover or opening/closing the external connection jack/stereo earphone jack cap.
The terminal can be submerged into a pool which has a depth of 1.5 m.
- Do not operate under water.
- If you put the terminal in water of swimming pool, be sure to have it within 30 minutes.
- If the terminal gets wet with water from the swimming pool, wash it in following procedure (→P22).
You can use the terminal in a bathroom.
- Do not immerse the terminal into a bathtub. Also, do not use the terminal in hot water. May cause malfunction. If you should fall the terminal into the bathtub, immediately pick it up to drain water in specified procedure (→P22).
- Never put the terminal in hot spring water or water containing soap, detergent or bath powder. In case the terminal gets wet with water other than tap water, wash it in specified procedure (→P22).
- You can use the terminal within 2 hours in a bathroom where the temperature ranges between 5 and 45℃ and
humidity ranges between 45 and 99%.
- Rapid temperature change may cause condensation. If you bring the terminal from a cold place to warm place such as a bathroom, wait until the terminal reaches the room temperature.
- Do not put water, hot water, etc. form a faucet or shower.
19
Contents/Precautions
To ensure waterproofness/ dustproofness
To avoid water/dust ingress, be sure to observe the following points.
Do not throw any liquid other than room-temperature tap water on the terminal, or soak it in such liquid.
When using the external connection jack or stereo earphone jack, pull the cap up with your finger by the groove as shown in the illustration.
The external connection jack/stereo earphone jack cap and the rubber packing of the rear side of the back cover play important roles for keeping waterproof/dustproof performance. Do not deform the back cover by twisting etc. or peel off or damage the rubber packing. Also, prevent dust from adhering to it.
To keep the terminal waterproofness/dustproofness, replacement of parts is required every 2 years regardless of whether the terminal appears normal or abnormal. DOCOMO takes the terminal to replace the parts as a chargeable service. Bring the terminal to a sales outlet such as a DOCOMO-specified repair office.
After using the external connection jack or stereo earphone jack, close the cap as the direction shown in the illustration, and make sure that the cap is completely closed without slack by pushing the tab in.
For installing the back cover, see the description in "■ Attaching" of "Attaching/Removing battery pack".→P27
Steadily attach the back cover without any space between and firmly close the external connection jack/ stereo earphone jack cap. Even a fine obstacle (one hair, one grain of sand, tiny fiber, etc.) put between contact surfaces may allow water to enter.
Do not poke the microphone, earpiece or speaker with a sharp object.
Do not let the terminal fall. It may become scratched causing the waterproof/dustproof performance to degrade.
Groove
20
Contents/Precautions
Important precautions
Do not perform actions shown in the illustrations below.
<Example>
Using Soap/
Detergent/Bath powder
Applying strong
Observe the following precautions to use the terminal properly.
water flow
Accessories and optional devices are not waterproof/ dustproof. When watching 1Seg, etc. with the terminal installed in the included desktop holder, do not use it in a bathroom, shower room, kitchen or lavatory even if it is not connected to the AC adapter. Do not apply water flow stronger than allowed (→P19) (e.g., such water flow that gives you pain when applied to your skin directly from a faucet or shower). T-02D provides IPX5 waterproof performances. However, it causes malfunction. If the terminal gets wet with salt water, sea water, refreshing beverage or mud or soil adhered, wash it immediately. If they dry out, it is hard to remove the dirt and it may cause damage or malf unction. Do not put the terminal in hot water, use it in a sauna or apply hot airflow (from a hair dryer etc.) to it. Do not move the terminal in water or slam the terminal against the surface of water. If you put the terminal in tap water or in water of swimming pool, be sure to have it within 30 minutes. When you use the terminal in swimming pool, obey rules of the facility. The terminal does not float on water.
Washing with brush/sponge
Soaking in
ocean water
Machine-washing
Using in
hot spring
Do not leave water on the terminal. May short-circuit the power jacks, or in a cold region, water may freeze causing malfunction.
Do not leave water on the microphone, earpiece or speaker. Such water may interfere with talking.
Do not leave water drop attached around the temperature/humidity sensor. May cause incorrect measurement of temperature/humidity.
If the back cover is damaged, replace it. Water may enter inside from a damaged section causing troubles such as electric shocks or corrosion of the battery.
If the terminal gets wet with water or other liquids with the external connection jack/stereo earphone jack cap or the back cover open, the liquid may get inside the terminal causing electric shocks or malfunction. Stop using the terminal, turn the power OFF, remove the battery pack and contact a DOCOMO-specified repair office.
If the external connection jack/stereo earphone jack cap, or the rubber gasket on the rear side of the back cover is damaged or deformed, replace it at DOCOMO-specified repair office.
DOCOMO does not guarantee actual operations under all states. Malfunctions deemed to be caused by inappropriate operation by the customer are not covered by the warranty.
21
Contents/Precautions
Washing the terminal
With pressing and holding the external connection jack/ stereo earphone jack cap not to open, wash the terminal in tap water without rubbing hard.
Press here
Do not apply water flow stronger than allowed (→P19) (e.g., such water flow that gives you pain when applied to your skin directly from a faucet or shower).
With the back cover steadily attached and pressing and holding the external connection jack/stereo earphone jack cap not to open, wash the terminal in tap water without rubbing hard.
Do not use brush, sponge, soap, detergent, etc.
If mud or soil is adhered to the terminal, do not operate the terminal. Eliminate the dirt first by shaking several times in tap water of wash-basin and then wash the terminal with running water.
After washing, wipe the surface with dry cloth well, drain water by the following procedure and let the terminal dry naturally.
Draining water from the terminal
When the terminal is wet, water may flow out after wiping it off; drain the water in the following steps.
a
Hold the terminal firmly and wipe off moisture on the terminal surface and back side with dry, clean cloth etc.
b
Shake the terminal approximately 20 times, firmly holding it, until there is no more water splattering.
22
Contents/Precautions
c
Swing the terminal in about 10 times against dry, clean cloth etc. to wipe off water remaining in the microphone, earpiece, speaker, keypad, or charging jack, etc.
d
Wipe off water drained from the terminal with dry, clean cloth etc., and dry naturally.
Water, if any, remaining in the terminal may ooze up after wiping off.
Do not wipe off water remaining in gaps directly with a cotton swab etc.
Charging
Check the following before and after charging.
Check if the terminal is not wet. Never try to charge the battery pack when the terminal is wet.
Accessories and optional devices are not waterproof/ dustproof.
When charging the battery when or after the terminal is wet, adequately drain it and wipe off water with a dry, clean cloth etc., before connecting the accessory desktop holder or opening the external connection jack cap.
When the external connection jack cap is opened for charging, close the cap firmly after charging. It is recommended to use the desktop holder for charging to prevent water from seeping inside from the external connection jack.
Do not use the AC adapter or desktop holder in a bathroom, shower room, kitchen, lavatory or other highly humid area. May cause fire or electric shock.
Do not touch the AC adapter or desktop holder with wet hands. May cause electric shock.
23
Contents/Precautions

Before using the terminal

Part names and functions

a b
c d e
f
g
a b
k l m
n
o
p q r
s t u v w
x
i
jh
c
d e
y
<Functions>
a
Stereo earphone jack
*
If you insert the plug of the stereo earphones, the earphone connecting MIC selection screen appears.→P70
b
External connection jack (MHL (HDMI connection) available)
Connect supplied AC Adapter F06 etc. *
To connect HDMI cable (commercially available), HDMI conversion cable L01 (optional) or HDMI conversion cable SC01 (optional) is needed.
c
Earpiece
d
In-camera
e
Proximity sensor
Prevents the erroneous operation of the touch panel during a call. *
Putting a protective sheet or seal on the proximity sensor may cause erroneous operation.
f
RGB sensor
Sense ambient light and brightness and automatically adjusts the display backlight. *
If you cover the sensor, detection may not be done correctly.
g
Display (Touch panel)
h
Microphone
*
Do not cover when using.
i
Indicator LED
Light in red : Charging Light in green once : Power ON *
Color of light or flash may be different depending on settings or application.
j
Temperature/humidity sensor
*
If you cover the sensor, detection may not be done correctly.
k
TV/FM transmitter antenna
*
Extend when watching 1Seg/mobacas/using FM transmitter.
l
Infrared data port
m
Camera light (Flash)
n
Out-camera
o
Back cover
*
To access docomo mini UIM card slot and the microSD card slot, remove the back cover and the battery pack.
*
Rubber gasket is attached on the rear side of the back cover to resist water/dust.
p
Charging jack
24
Before using the terminal
q
Speaker
r
FOMA antenna
*
The antenna is built-in the terminal. Covering around the antenna by the hand may affect the quality.
s
LTE antenna
*
The antenna is built-in the terminal. Covering around the antenna by the hand may affect the quality.
t
GPS antenna
*
The antenna is built-in the terminal. Covering around the antenna by the hand may affect the quality.
u
Bluetooth/Wi-Fi antenna
*
The antenna is built-in the terminal. Covering around the antenna by the hand may affect the quality.
v
mark
Installation of IC card *
You can use Osaifu-Keitai by holding mark over the card reader. And download a compatible application to send and receive data via iC transmission. IC card cannot be removed.
w
Fingerprint sensor
*
To operate the fingerprint sensor, slide with the finger or press. To press the fingerprint sensor, press until it clicks.
x
Back microphone
*
Use to reduce noise during a call.
y
Strap hole
<Key functions>
a
Menu key
m
Press : Display currently available settings etc.
b
Home key
B
Press : Return to the Home screen Press and hold for 1 second or more : Task manager
c
Back key
c
Press : Return to the previous screen, exit out of application
d
Power key
X
Press : Activate/Deactivate sleep mode Press and hold : Turn power ON/OFF, restart, Public mode, Airplane mode, activate/deactivate Manner mode
e
Volume key
Press : Adjust the volume of each function Press and hold D for 1 second or more : Activate/ Deactivate Manner mode
SD

docomo mini UIM card

The docomo mini UIM card is an IC card in which user information such as your phone number etc. is saved.
You can use the terminal only with docomo mini UIM card. If you have a UIM or FOMA card, bring it to a docomo Shop to replace.
When docomo mini UIM card is not inserted to the terminal, some functions are not available.
For details on docomo mini UIM card, refer to the docomo mini UIM card manual.
Installing/Removing docomo mini UIM card
Turn the terminal OFF, remove the back cover and the battery pack before installing/removing.→P27
Installing
a
Insert docomo mini UIM card into the guide with the IC side facing down
Check the orientation of docomo mini UIM card corner cut.
Corner cut
IC
Guide
25
docomo mini UIM card
Before using the terminal
Removing
a
Press the lock with your finger (a) and pull docomo mini UIM card out 2-3 mm toward
b
Lift your finger from the lock, press docomo mini UIM card lightly and slide it toward
Do not press docomo mini UIM card downward forcefully.
b
INFORMATION
When handling docomo mini UIM card, take care not to touch or scratch the IC part. Note that inserting docomo mini UIM card forcibly into the terminal may damage docomo mini UIM card.
Security code of docomo mini UIM
b
b
a
Lock
card
There is a security code called PIN code in the docomo mini UIM card. The code is set to "0000" at subscription, which you can change by yourself.→P77

microSD card

microSD card
The terminal supports microSD card of up to 2 GB, and microSDHC card of up to 32 GB, SDHC UHS-I card of up to 32 GB (as of July, 2012). Note that DOCOMO does not guarantee actual operations of all microSD cards, microSDHC cards, and SDHC UHS-I cards. For information on compatible microSD cards, contact manufacturers of microSD cards.
Do not turn the power OFF or give shock while accessing data on the microSD card. The data may corrupt.
Installing/Removing microSD card
A microSDHC card (sample) is inserted when purchased. Before using, refer to the instruction manual for microSDHC card.
Turn the terminal OFF, remove the back cover and the battery pack before installing/removing.→P27
26
Before using the terminal
Installing
a
With the metal contacts side facing down, insert a microSD card in the direction shown until it locks
Removing
a
Push the microSD card lightly and then release it, then pull the microSD card straight out
INFORMATION
Note that the microSD card may jump out of the terminal when removing it.

Battery pack

Attaching/Removing battery pack
Attach/Remove the battery pack after turning OFF the power.
When you attach/remove the back cover, hold the terminal in your hand so that you will not scratch the display etc.
If the terminal gets wet, wipe off water before removing the back cover.
Use Battery Pack F25 dedicated to the terminal.
Attaching
a
Put your fingernail into the back cover removing part and lift the back cover vertically to remove
To ensure waterproofness/dustproofness, the back cover is structured to attach firmly. If you have difficulties to remove, remove it strongly.
Back cover removing part
27
Before using the terminal
b
With the arrow printed side of the battery pack label facing up, align the metal contacts of the battery pack with those of the terminal, insert in the direction of a to attach in the direction of
b
b
a
Removing
a
Perform Step a in Attaching the battery pack
b
Pinch the tab of the battery pack and pick it up in the direction of the arrow to remove
c
Check the orientation of the back cover, and attach it fitting to the terminal
d
Fit the tabs on the reverse side of the back cover with the grooves on the terminal, press firmly to close
Check if there are no gaps in order to maintain waterproofness/dustproofness, and attach securely.
*
"Waterproofness/Dustproofness"→P19
Removing tab
28
Before using the terminal
Loading...
+ 144 hidden pages