Toshiba SL970-23, SL970-32, SL970-40 User Manual

Download

RL93* Digital

Series

SL97* Digital

Series

RL95* Digital

Series

Contents

English

INSTALLING YOUR TV

Safety Precautions ............................................................................. 4

Installation and important information .....................................5

The remote control (CT-90404) .................................................... 7

Inserting batteries and effective range ............................7

The remote control (CT-90420) .................................................... 8

Inserting batteries and effective range ............................8

CONNECTING YOUR TV

Connecting external equipment ..................................................9

Connecting an HDMI® device ......................................................10

To connect an HDMI device ...............................................10

HDMI’s ARC (Audio Return Channel) feature ...............10

REGZA-LINK connection ................................................................11

Connecting a computer ................................................................12

To connect a PC to the RGB/PC terminal .......................12

To connect a PC to the HDMI terminal ...........................12

Connecting a home network ......................................................13

To connect the TV to a home network - Wired ...........13

To connect the TV to a home network

with an internet connection - Wireless ......................13

To connect the TV to the

Intel® Wireless Display ready PC ...................................13

Controls and input connections .................................................14

Switching on ............................................................................14

Using the menu system .......................................................14

Using the TV controls and connections .........................14

MENU structure ................................................................................15

SETTING UP YOUR TV

Startup Application .........................................................................16

Quick Setup ..............................................................................16

Ant/Cable In (if available) ....................................................18

Auto Tuning .............................................................................19

ATV Manual Tuning .........................................................................20

Tuning ........................................................................................20

Skip ..............................................................................................21

Sorting positions ....................................................................22

DTV Manual Tuning ........................................................................22

Manual Tuning ........................................................................22

Manual Tuning for DVB-C ...................................................23

DTV Settings ......................................................................................23

Channels ...................................................................................23

Standby Channel Update ....................................................24

Location setting ......................................................................24

Analogue switch-off ............................................................24

CONTROLS AND FEATURES

General controls ...............................................................................25

Quick Menu ..............................................................................25

Selecting channels ................................................................25

The Time Display – analogue only .................................25

Stereo and Bilingual transmissions .................................25

Sound controls .................................................................................26

Volume controls and sound mute ...................................26

Dual ............................................................................................. 26

Balance ......................................................................................26

Bass, Treble .............................................................................. 26

Voice Enhancement ..............................................................26

Dynamic Bass Boost ..............................................................26

Stable Sound® .........................................................................26

Dynamic Range Control ......................................................26

Audio Level Offset .................................................................27

TV Speakers On/Off ...............................................................27

Headphone Settings .............................................................27

Audio Description ................................................................. 27

Widescreen viewing ....................................................................... 28

Picture controls ................................................................................ 30

Picture Mode ...........................................................................30

Picture preferences ...............................................................30

Reset ...........................................................................................30

ColourMaster ...........................................................................30

Base Colour Adjustment .....................................................31

Colour Temperature .............................................................31

Auto Brightness Sensor .......................................................31

Active Backlight Control ...................................................... 31

Black/White Level ..................................................................31

MPEG NR – Noise Reduction ..............................................31

Cinema Mode ..........................................................................32

Resetting the advanced picture settings ......................32

Automatic Format (Widescreen) ......................................32

4:3 Stretch ................................................................................ 32

DNR – Digital Noise Reduction .........................................32

Blue Screen .............................................................................. 32

Picture Position ...................................................................... 32

Picture still ................................................................................32

Using your home network ...........................................................33

Setting up the Network .................................................................34

Wireless Setup ........................................................................ 34

Advanced Network Setup .................................................. 36

DNS Setup ................................................................................ 37

Network Connection Test ...................................................37

Using the software keyboard ............................................38

Network Device Setup ...................................................................38

External Control Setup ......................................................... 38

Device Name Setup .............................................................. 39

USB HDD Record Function ...........................................................40

Setting up the USB HDD for recording ..........................40

To record DTV programmes

(One Touch Recording) .................................................... 40

How to set recordings via the Programme Guide .....41

To check, edit or delete scheduling information .......42

To view a recorded programme ....................................... 43

Operations from the Library screen ................................43

Recording Setup .................................................................... 44

Scheduling priority ............................................................... 46

Using Toshiba Places ......................................................................47

Using Hybrid TV Standard (if available) ...................................47

Using Intel® Wireless Display .......................................................48

Intel® Wireless Display Device Name ..............................48

PC List ......................................................................................... 48

Using the Media Player ..................................................................49

Basic operation .......................................................................49

Viewing photo files

(on a DLNA CERTIFIED™ Server or USB device) .......50

Viewing movie files

(on a DLNA CERTIFIED™ Server or USB device) .......52

Playing music files

(on a DLNA CERTIFIED™ Server or USB device) .......55

Other features ...................................................................................56

Panel Lock .................................................................................56

The timers ...........................................................................................56

Programme Timers – digital only ...................................56

On Timer ....................................................................................57

Sleep Timer ..............................................................................57

Energy Saving Settings ..................................................................58

Automatic Power Down ......................................................58

No Signal Power Down ........................................................58

Digital on-screen information .....................................................58

Information ..............................................................................58

Using EPG (Electronic Programme Guide) ..............................59

Using Broadcast Guide ........................................................59

Genre selection/searching ..................................................60

Using MediaGuide .................................................................60

MediaGuide screen ............................................................... 60

Primary Navigation menu ...................................................60

Digital settings – parental control ............................................61

Parental PIN Setup .................................................................61

Parental Setup .........................................................................62

Network Lock .......................................................................... 62

Digital settings – Channel Options ..........................................62

Selecting favourite channels .............................................62

Favourite Channel Lists .......................................................62

Skip channels ...........................................................................63

Locking channels ...................................................................63

Digital settings – other settings ................................................63

Subtitles .....................................................................................63

Audio languages ....................................................................63

Common Interface ................................................................64

Software Upgrade and Licences ................................................64

Searching for New Software ..............................................64

Network Upgrade ..................................................................64

Software Licences ..................................................................64

System Information and Reset TV ............................................. 65

System Information ..............................................................65

Reset TV .....................................................................................65

PC Settings ......................................................................................... 65

Horizontal and Vertical Position .......................................65

Clock Phase ..............................................................................65

Reset ...........................................................................................66

Sampling Clock .......................................................................66

Input selection and AV connections ........................................ 66

Input selection ........................................................................66

Digital Audio Output ............................................................67

Labeling video input sources ............................................67

Using REGZA-LINK ...........................................................................68

Enable REGZA-LINK ...............................................................68

TV Auto Power ........................................................................68

Auto Standby ..........................................................................68

Amplifier Control ................................................................... 68

Initial Speaker Setting ..........................................................68

REGZA-LINK input source selection ................................68

REGZA-LINK one touch play .............................................. 69

REGZA-LINK system standby .............................................69

TEXT SERVICES

Text services ......................................................................................70

Selecting modes ....................................................................70

Text information ....................................................................70

Navigating pages using Auto ............................................70

Navigating pages using LIST .............................................70

Control buttons ......................................................................71

PROBLEM SOLVING

Questions and Answers ...............................................................72

INFORMATION

License Information ........................................................................75

Information ........................................................................................ 77

Specifications and accessories ................................................... 81

English

During the life of your TV firmware updates will be made available to ensure that your TV maintains optimum performance:

USB HDD Recording is supported on this TV, if this functionality is not implemented at time of purchase it will be made available via

*Please note the USB HDD recording feature will not be available in all countries.

Intel® Wireless Display (Intel® WiDi) is supported on this TV, if this functionality is not implemented at time of purchase it will be

If your TV is connected to the internet, firmware will be automatically made available.

If your TV is not connected to the internet, you can download the latest version of firmware from

*Some features are limited due to local legislation and may not be available in all countries

firmware update in mid 2012.

made available via firmware update in mid 2012.

www.toshiba-om.net/firmware.php

INSTALLING YOUR TV

Safety Precautions

English

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products, and some points may not apply to the goods you have just purchased.

Air Circulation

Leave more than 10cm clearance around the television to allow adequate ventilation. This will prevent overheating and possible damage to the television. Dusty places should also be avoided.

Heat Damage

Damage may occur if the television is left in direct sunlight or near a heater. Avoid places subject to extremely high temperatures or humidity. Place in a location where the temperature remains between 5°C min. and 35°C max.

Mains Supply

The mains supply required for this equipment is 220240v AC 50/60Hz. Never connect to a DC supply or any other power source. DO ensure that the television is not standing on the mains lead. Use only the supplied lead. DO NOT cut off the mains plug from this equipment, this incorporates a special Radio Interference Filter, the removal of which will impair its performance. IF IN DOUBT, PLEASE CONSULT A COMPETENT ELECTRICIAN.

DO read the operating instructions before you

attempt to use the equipment.

DO ensure that all electrical connections (including

the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturers’ instructions. Switch off and withdraw the mains plug before making or changing connections.

DO consult your dealer if you are ever in doubt about

the installation, operation or safety of your equipment.

WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. See page 5.

DO be careful with glass panels or doors on

equipment.

DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND ‘LIVE’ PARTS.

THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE.

Do not

DO NOT obstruct the ventilation openings of the

equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.

DO NOT allow electrical equipment to be exposed to

dripping or splashing or objects filled with liquids, such as vases, to be placed on the equipment.

DO NOT place hot objects or naked flame sources,

such as lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to fires.

WARNING: To prevent the spread of fire, keep candles or other open flames away from this product at all times.

DO NOT use makeshift stands and NEVER fix legs with

wood screws. To ensure complete safety, always fit the manufacturer’s approved stand, bracket or legs with the fixings provided according to the instructions.

DO NOT leave equipment switched on when it is

unattended, unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off by withdrawing the plug, and make sure your family knows how to do this. Special arrangements may need to be made for people with disabilities.

DO NOT continue to operate the equipment if you

are in any doubt about it working normally, or it is damaged in any way – switch off, withdraw the mains plug and consult your dealer.

WARNING: Excessive sound pressure from earphones or headphones can cause hearing loss.

ABOVE ALL - NEVER let anyone, especially children, push or hit the screen and cabinet back, or push anything into holes, slots or any other openings in the case. These actions will damage screen or internal parts.

NEVER guess or take chances with electrical equipment of any kind - it is better to be safe than sorry.

INSTALLING YOUR TV

Sturdy tie (as short as possible)

Stand clip

Fixing strap

Screw (supplied)

Fixing strap

‘P’ Clip

Stand style is dependent on model

CAUTION: The diameter and length of the screws

differ depending on wall bracket model. Use of screws other than the screws specified may result in internal damage to the TV set or cause it to fall, etc.

Place four spacers (supplied).

Screw

Spacer (supplied)

TV back panel

Wall bracket

28–42mm (23RL/23SL)

28–32mm (32/40RL and 32/40SL)

M4 (23RL/23SL) M6 (32RL and 32SL) M8 (40RL and 40SL)

32/40RL 32/40SL 23RL/23SL

Installation and important information

Where to install

Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen.

Place the TV on a stable, level surface that can support the weight of the TV. In order to prevent injury and maintain stability of this apparatus, secure the TV to the level surface using the strap if fitted, or to a wall using a sturdy tie to the P clips provided. Otherwise secure the TV on the level surface using the supplied mounting screw.

The LCD display panels are manufactured using an extremely high level of precision technology; however, sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not a sign of a malfunction.

Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break or damage the screen. Also, please be certain that small items cannot be inserted into slots or openings in the case.

Avoid using chemicals (such as air refreshers, cleaning agents, etc.) on or near the TV pedestal. Studies

agents and mechanical stress (such as weight of TV). Failure to follow these instructions could result in serious injury and/or permanent damage to TV and TV pedestal.

Please use a wall bracket appropriate for the size and weight of the LCD TV.

• Two people are required for installation.

• To install a wall-mount from another manufacturer, use the

1 Unplug and remove any cables and/or other component

2 Carefully lay the front of the unit face down on a flat,

3 Follow the instructions provided with your wall bracket.

4 Make sure to place the spacers supplied between the

5 Always use the screws supplied or recommended by the

indicate that plastics may weaken and crack over time from the combination effects of chemical

When using a Wall Bracket

Removing the Pedestal Stand:

1 Carefully lay the front of the unit face down on a flat,

cushioned surface such as a quilt or blanket. Leave the

SPACERS (supplied).

connectors from the rear of the TV.

cushioned surface such as a quilt or blanket.

Before proceeding, make sure the appropriate bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket.

bracket and the back of the TV.

wall mount manufacturer.

stand protruding over the edge of the surface.

NOTE: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.

2 Remove the four screws.

3 Once you have removed all four screws holding the

pedestal stand in place, remove the pedestal stand from the TV by sliding the pedestal stand away from the TV.

English

INSTALLING YOUR TV

English

The digital reception function of this television is only effective in the countries listed in the “Country” section of the “System Seup” menu. Depending on country/area, some of this television's functions may not be available. Reception of future additional or modified services can not be guaranteed with this television.

If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays, video games, on-screen menus, etc. are left on the television screen for any length of time, they could become conspicuous. It is always advisable to reduce both the brightness and contrast settings.

Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3 outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of other size modes (e.g.: Super Live) will prevent permanent retention.

Please take note

EXCLUSION CLAUSE

Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by: i) Fire;

ii) Earthquake; iii) Accidental damage; iv) Intentional misuse of the product; v) Use of the product in improper conditions; vi) Loss and/or damage caused to the product whilst in the possession of a third party; vii) Any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s

manual;

viii) Any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with

associated equipment;

Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product.

When Using a USB HDD

• The recording function has been designed for private use and entertainment in your home environment. Please note that any commercial use of the recording function could lead to copyright infringement of authors’ rights. Toshiba asks you to respect the intellectual property rights of third parties.

• Before recording to a device connected to the TV, make a test recording and check the recording performance.

• Programmes that are prohibited from copying due to copyright protection cannot be recorded.

• Toshiba shall not be liable for compensation or incidental damages of any kind whatsoever resulting from content that was not properly recorded on the recording device or that was modified or lost.

• Toshiba shall not be liable for damages of any kind whatsoever (breakdown of the recording device, modification or loss of the recorded content, etc.) resulting from malfunction, operating failure or incorrect operation due to combining with another connected device.

• If you connect a USB HDD that has been used with a PC or another TV, only programmes which are recorded using this TV can be playback.

• Turn off the TV power supply before if you disconnect USB HDD.

Not doing so may result in loss of the recorded data or malfunction of the USB HDD.

• Please note that recording on the USB HDD is no longer playable after the TV’s main-board is exchanged during service.

The remote control (CT-90404)

CT-90404

1 2

5 4

14 19

28 29

Simple at-a-glance reference of your remote control.

1 For On/Standby mode

2 To select external input sources

3 To select TV Mode (DTV Ant/DTV Cable/ATV)

4 Selectable Picture

5 Widescreen viewing

s Stereo/bilingual transmissions

7 Digital Subtitles or Analogue TEXT Subtitle pages if available

8 Number buttons

9 Switch the Audio Description On/Off

10 To return to previous channel

11 To alter the TV volume

12 To display on-screen information

To access the index page in Text mode

13 To mute the TV sound

14 To access Quick Menu

15 To change programme positions

To change TEXT pages

INSTALLING YOUR TV

16 To access the “TOSHIBA PLACES” Top Page

When network is not connected, an error message will be displayed.

17 To access Media Player Menu

18 To call up text services

19 To access the analogue or digital Channel List

20 On-screen Menus

21 To display the digital on-screen Programme Guide

22 To page up, down, left or right

23 When using menus, the arrows move the cursor on the screen

up, down, left or right. Press OK to confirm your selection

24 To return to previous Menu

25 To exit menus and applications

26 When in TV mode:

D Analogue time

display

When using Programme Guide:

Z –24 hours z +24 hours CC –1 page cc +1 page

27 Colour buttons: Text and interactive service control buttons

28 Picture still

29 To record DTV programmes

When in Text mode:

A To reveal concealed

text

B To hold a wanted

page

C To enlarge text

display size

D To select a page

while viewing a normal picture

During Playback:

c To PLAY v To STOP W/w To PAUSE/STEP Z To SKIP-BACK CC To REWIND cc To FAST FORWARD z To SKIP-FORWARD

Inserting batteries and effective range

Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the proper way. Suitable battery types for this remote are AA, IEC R6 1.5V.

Do not combine a used, old

battery types. Remove dead batteries immediately to preven t acid from leaking into the battery compartment. Dispose of them in accordance with instructions on page 76 of this manual.

Warning: Batteries must not be exposed to excessive heat such as sunshine, fire or the like.

The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the television. If the operating range becomes reduced, the batteries may need replacing.

battery with a new one or mix

English

INSTALLING YOUR TV

The remote control (CT-90420)

English

Simple at-a-glance reference of your remote control.

24 25

1 4

5 86

11 14

15 18

2120

2 26

15 To mute the TV sound

16 To access Quick Menu

17 On-screen Menus

18 To display the digital on-screen Programme Guide

19 When using menus, the arrows move the cursor on the screen

up, down, left or right. Press OK to confirm your selection

20 To return to previous Menu

21 To exit menus and applications

22 Colour buttons: Text and interactive service control buttons

23 When in TV mode:

D Analogue time

display

When using Programme Guide:

Z –24 hours z +24 hours CC –1 page cc +1 page

24 To record DTV programmes

25 Picture still

26 To call up text services

27 Digital Subtitles or Analogue TEXT Subtitle pages if available

When in Text mode:

A To reveal concealed

text

B To hold a wanted

page

C To enlarge text

display size

D To select a page

while viewing a normal picture

During Playback:

c To PLAY v To STOP W/w To PAUSE/STEP Z To SKIP-BACK CC To REWIND cc To FAST FORWARD z To SKIP-FORWARD

1 For On/Standby mode

2 To select external input sources

3 Selectable Picture

4 Widescreen viewing

s Stereo/bilingual transmissions

6 To access the “TOSHIBA PLACES” Top Page

When network is not connected, an error message will be displayed.

7 To select TV Mode (DTV Ant/DTV Cable/ATV)

8 To access the analogue or digital Channel List

9 Number buttons

10 Switch the Audio Description On/Off

11 To return to previous channel

12 To alter the TV volume

13 To change programme positions

To change TEXT pages

14 To display on-screen information

To access the index page in Text mode

Inserting batteries and effective range

Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the proper way. Suitable battery types for this remote are AAA, IEC R03 1.5V.

Do not combine a used, old

battery types. Remove dead batteries immediately to preven t acid from leaking into the battery compartment. Dispose of them in accordance with instructions on page 76 of this manual.

Warning: Batteries must not be exposed to excessive heat such as sunshine, fire or the like.

battery with a new one or mix

CONNECTING YOUR TV

LAN port

SCART (EXT 1)

DIGITAL AUDIO OUTPUT

(OPTICAL)

HDMI 3 INPUT

HEADPHONE jack

HDMI 1/2 INPUTS

COMPONENT VIDEO/AUDIO INPUT VIDEO/AUDIO INPUT (Y/L/R) (EXT 2)

RGB/PC INPUT

Media Recorder

Aerial Cable

Power cord

ILLUSTRATION SHOWS 40RL933.

Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket.

English

Aerial cables: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connect the aerial to the socket on the rear of the television. If you use a decoder and/or a media recorder, it is essential that the aerial cable is connected through the decoder and/o r through the media recorder to the television.

SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connect the media recorder IN/OUT socket to the television. Connect the decoder TV socket to the television.

Before running Auto Tuning, put your decoder and media recorder to Standby.

The RCA sockets alongside the COMPONENT VIDEO INPUT sockets will accept L and R audio signals.

When connecting the VIDEO/AUDIO devices, connect those cables to Y/L/R sockets.

The Digital Audio Output socket enables the connection of a suitable surround sound system.

NOTE: This output is always active.

HDMI® (High-Definition Multimedia Interface) is for use with a DVD decoder or electrical equipment with digital audio and video output. For acceptable video or PC signal formats through the HDMI terminals, see page 78.

NOTE: Although this television is able to connect to HDMI equipment, it is possible that some equipment may not operate correctly.

LAN port is used to connect the TV to your home network. This TV can play digital content stored on a DLNA CERTIFIED™ product with server function.

A wide variety of external equipment can be connected to the back of the television; therefore, the relevant owner’s manuals for all additional equipment must be referred to for exact instructions.

If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button. To recall external equipment, press HDMI 1, HDMI 2, HDMI 3 or PC.

When the external input mode is s elected while viewing DTV mode, the SCART socket does not output video/audio signals.

o to select between TV, EXT 1, EXT 2,

CONNECTING YOUR TV

HDMI cable

HDMI device

the back of your television

Connecting an HDMI® device

English

The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device.

This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant consumer electronic devices (such as a set-top box or DVD player with HDMI output). For acceptable video signal formats, see page 78.

NOTE: Supported Audio format: Linear PCM, Dolby Digital (AC-3), sampling rate 32/44.1/48kHz.

To connect an HDMI device

Connect an HDMI cable (type A connector) to the HDMI terminal.

For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo ( ).

• If your HDMI connection is capable of 1080p and/or your television is capable of refresh rates greater than 50Hz, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly with this model.

• HDMI cable transfers both video and audio. Separate analogue audio cables are not required (see illustration).

HDMI’s ARC (Audio Return Channel)

feature

This feature enables the audio signal of the TV to be sent to the AV amplifier via the HDMI cable. It will not be necessary to connect a cable from the audio output of the TV to the audio input of the AV amplifier to reproduce the audio received from the tuner of the TV through the AV amplifier.

the back of your television

AV ampliﬁer that supports ARC

HDMI cable

To view the HDMI device video, press the HDMI 1, HDMI 2 or HDMI 3 mode.

o button to select

CONNECTING YOUR TV

AV ampliﬁer Playback device

Playback device

the back of your television

REGZA-LINK connection

You can control the basic functions of connected audio/video devices using the television’s remote control if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup and operations, see pages 68–69.

English

For the setup shown above, you will need three HDMI cables.

NOTE:

• If several devices are connected, the REGZA-LINK feature may not operate properly.

• For proper operation, it is recommended that you use HDMI cables with the HDMI Logo ( ).

• This function is available when one PC and one AV amplifier are connected separately. However, it may not operate properly if the PC is connected via the AV amplifier.

Before controlling the device(s):

• After completing the above connections, set the REGZALINK Setup menu as you desire (see page 68).

• The connected devices must also be set. For details, see the operation manual for each device.

• The REGZA-LINK feature uses CEC technology as regulated by the HDMI standard.

• This feature is limited to models incorporating Toshiba’s REGZA-LINK. However, Toshiba is not liable for those operations. Refer to individual instruction manuals for compatibility information.

CONNECTING YOUR TV

Connecting a computer

English

With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television.

To connect a PC to the RGB/PC terminal

When connecting a PC to the RGB/PC terminal on the television, use an analogue RGB (15-pin) computer cable.

the back of your television

Mini D-sub 15 pin connector

Computer

RGB PC cable (not

supplied)

Conversion adaptor if required (not supplied)

To use a PC, set the monitor output resolution on the PC before connecting it to the television. For acceptable PC signal formats, see page 77.

To display the optimum picture, use the PC setting feature (see page 65).

NOTE:

• Some PC models cannot be connected to this television.

• An adaptor is not needed for computers with a compatible mini D-sub15-pin terminal.

• Depending on the DVD’s title and the specifications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during multi-angle scenes.

• A ban d m ay a ppe ar at t he e dg es o f th e s cre en o r p art s of th e picture may be obscured. This is due to scaling of the picture by the set, it is not a malfunction.

• When PC input mode is selected, some of the television’s features will be unavailable e.g. Colour System in the System Setup menu.

• Some PC models may output unique signals that the television may be unable to detect (see page 77).

• If connecting a certain PC model with a unique PC signal, the PC signal may not be detected correctly.

To connect a PC to the HDMI terminal

When connecting a PC to the HDMI terminal on th e television, use an HDMI-to-DVI adaptor cable.

If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector).

the back of your television

Computer

HDMI-to-DVI

adaptor cable

For acceptable PC and video signal formats, see page 78.

NOTE:

• The edges of the images may be hidden.

• If connecting a certain PC model with a unique PC signal, the PC signal may not be detected correctly.

CONNECTING YOUR TV

Modem (if available)

Server PC

Router with Hub

the back of your television

Cable or Phone jack

[1] [2]

[2]

[3][2]

Access point (AP)

Wireless LAN router

Modem

TOSHIBA Dual Band WLAN adaptor

the back of your television

Computer

Intel® Wireless Display

ready PC

TOSHIBA Dual Band WLAN adaptor

Intel® WiDi

English

Connecting a home network

The LAN port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to access photo, video and audio files that are stored on a DL NA CER TIF IED ™ s erv er a nd pla y/d isp la y th em o n your TV.

NOTE:

• If you connect to a shared network outside your home, it is advisable to use a router. Always use DLNA CERTIFIED™ products in private network environments. Con nect this TV to the same router as other DLNA CERTIFIED™ products (server).

• If you use a hub or switch to connect the TV to your home network, you may not be able to use the automatic setup and will have to manually set up the network address. See page 36.

• If you use a router with built-in DHCP functionality, use the automatic setup. Manual setup may not work.

• If you connect the TV and PC directly, use a crossover LAN cable.

• Please ask PC manufacturer about details of PC settings.

• Wireless appliances may interfere with WiDi function and DTVdisplay.

To connect the TV to a home network -

Wired

To connect the TV to a home network

with an internet connection - Wireless

Please refer to “Wireless Setup” section on page 34.

How to use this Dual Band Wireless LAN Adaptor

• If this device is going to be operated in the frequency ran ge of 5.15 GHz to 5.35 GHz, it is restricted to indoor use.

• If this device is going to be operated for 802.11 b/g/n function in the frequency range of 2.454 GHz to 2.4835 GHz in France, it is restricted to indoor use.

• A general authorization is required for using this device outdoors or in public places in Italy.

• This device is NOT ALLOWED to be used in the geographical area wit hin a radius of 20km from the centre of Ny-Alesund in Norway.

To connect the TV to the Intel® Wireless

Display ready PC

[1] Coaxial or telephone cable (depending on your modem typ e)

[2] Standard LAN cable

[3] Do NOT connect a phone jack directly to the TV’s LAN port.

CONNECTING YOUR TV

40RL933.ILLUSTRATION SHOWS

COMMON INTERFACE The Common Interface is for a Conditional Access Module (CAM). Contact a service provider. The software updating of CI Plus CAM may be automatically executed. At this time, your Recording/Reminder programming will be canceled.

Ambient Light Sensor

RED LED – Standby GREEN LED – Power on

ORANGE LED – Programme timer set (digital only) RED LED – Recording

USB port Media Player/Wireless LAN adaptor ready for a home network USB HDD connection ready

Control panel

Controls and input connections

English

A wide variety of external equipment can be connected to the input sockets on the side of the television.

While all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.

Switching on

If the RED LED is not lit, check that the mains plug is connected to the power supply and press control; it may take a few moments. The GREEN LED will be lit.

To put the television into Standby, press control. To view the television, press take a few seconds to appear.

For energy saving:

We recommend that you use the television with the factory settings. The factory settings are for energy saving. Unplugging the mains plug will cut energy use to zero for all televisions. This is recommended when the television is not being used for a long time, e.g. when on holiday. Reducing the brightness of the screen will reduce energy use. Energy efficiency cuts energy consumption and thus saves money by reducing electricity bills.

NOTE: Putting the television into standby mode will reduce energy consumption, but will still draw some power.

Press MENU on the remote control to display the menu.

The menu appears as a list of five topics. As each symbol is selected by pressing respective options will appear above.

NOTE: The same menu is displayed in DTV (Digital TV) and ATV (Analogue TV) modes; however, where some items are not available in a mode, they will appear grayed out.

Using the menu system

C or c on the remote control, its

1 on the remote

1 again. The picture may

1 on the remote

To use the option, press move up and down and press setting.

B and b on the remote control to

C or c to select your desired

Using the TV controls and connections

• To turn on or off the TV, press

• To alter the volume, press + or – . + and – buttons operate as volume up/down as default.

• To alter the programme position, press

or U.

press

• To select an external input, press and hold Inputs window appears, and then press appropriate input source.

The Media Player feature provides access to photo, movie and music files stored on a USB storage device that is connected via the USB port or on a network device.

The USB port also has to be used with the “TOSHIBA Dual Band WLAN Adaptor WLM-20U2” in order to access a wireless network.

You must use the TOSHIBA Wireless LAN device to ensure correct operation of this feature. This feature is available only when the “TOSHIBA Dual Band WLAN Adaptor“ is used.

Please always refer to the owner’s manual of the equipment to be connected for full details.

NOTE:

• The USB socket has limited functionality and Toshiba can take no responsibility for damage to other connected equipment.

• Interactive video games that involve shooting a “gun” at an on-screen target may not work with this TV.

p / o once and

p / o until the

or U to select the

MENU structure

TV Programmes

Media Player

Connected TV

Setup

Function

Genre Search

Guide

Programme

Timers

Library

To open the main menu (illustration below) , press MENU on the remote control.

1st Layer 2nd Layer 3rd Layer

Press MENU. Press

TV Programmes

C c / B. Press C c.Press OK. Press BbC c.

CONNECTING YOUR TV

English

Media Player

Connected TV

Function

Setup

Guide Genre Search Programme Timers Library

USB Media Player Network Media Player

Toshiba Places

On Timer Sleep Timer Intel® Wireless Display

Picture Sound Preferences System Setup

Jump to Programme Guide (EPG) Jump to Genre Search Jump to Programme Timers Jump to Library

USB Media Player Menu Network Media Player Menu

Jump to Toshiba Places NOTE: This menu item is subject to

change without notice.

On Timer Menu Sleep Timer Menu Jump to Intel® Wireless Display

Picture Menu Sound Menu Preferences Menu System Setup Menu

SETTING UP YOUR TV

Quick Setup

Country

Germany

Primary Subtitle Language

Turkish

German

German English

Secondary Subtitle Language Primary Audio Language Secondary Audio Language

Network Setup

Yes

Do you want to configure network setup?

Network Type

Wired

Please select a network type.

Wireless Setup

Assisted Setup

Please select a kind of wireless network.

Startup Application

English

Before switching on the TV, make sure your decoder/media recorder, if applicable, is in standby. To set up the television, use the buttons on the remote control as detailed on page 7.

Quick Setup

a Press the 1 button. The Menu Language screen will

appear. This screen will appear the first time that the television is switched on and each time Reset TV is selected.

b Press BbCc to select the menu language and

press OK.

c Highlight Country and press C or c to select. The

television is now set to tune the stations for your country.

NOTE:

• The following display menus will differ slightly according to the country you selected.

• If there is not a country that you want to select in the list, select Others.

d Press OK, and the Location screen will appear.

Location

To use the TV for displaying in a store showroom, please select [Store]. [Home] mode is recommended for normal use.

Home

e Press C or c to select Home or Store. For normal

home use, select Home.

f Press OK, and the AutoView screen will appear, press

C or c to select Yes or No.

AutoView

AutoView mode automatically adjusts picture settings to suit ambient light conditions. Do you wish to enable AutoView mode?

g Press OK, and the Network Setup screen will appear.

Press

C or c to select Yes or No.

• When you select No, skip to step 15.

h Press OK, and the Network Type screen will appear.

Press

C or c to select Wired or Wireless.

• When you select Wired (LAN cable connection), skip to step 12.

• When you select Wireless (USB WLAN adaptor connection), follow step 9.

NOTE: If the USB WLAN adaptor is not connected, Network Type screen does not display and skip to

step 12.

i Press OK, and the Wireless Setup screen will appear.

Press

C or c to select the Wireless Setup type.

• Assisted Setup - follow step 10. Input the Security Key only.

• Manual Setup, skip to step 11. Input the all settings.

NOTE: EXIT is available during settings.

j In step 9, when you select Assisted Setup;

Press OK, and the Assisted Setup screen will appear. Press

B or b to select the desired AP and press OK.

NOTE: Check the MAC address on the label of the AP

or in the manual, and select your AP.

B or b to select Security Key and press OK.

Press The Software Keyboard window will appear (page 38). Input the Security Key by using the Software Keyboard. To save your setting, press the BLUE button.

NOTE:

• The Security Key must adhere to these conditions:

- TKIP/AES: 8-63 ASCII or 64 Hex characters

- WEP: 5 or 13 ASCII or 10 or 26 Hex characters

• There is only one key ID to set for WEP encryption.

B or b to highlight Done and press OK.

Press

NOTE:

• If Network Name is not displayed, see Manual Setup below to set Network Name before pressing Done.

•If BACK is pressed before Done is selected, settings are not saved.

When the message “Wireless configuration is complete.” appears on screen, press OK. The screen will skip to step 12.

SETTING UP YOUR TV

IP Address Setup

Auto Setup

Default Gateway

Subnet Mask

IP Address

00:11:22:33:44:55

DNS Setup

Auto Setup

Secondary DNS Address

MAC Address

Primary DNS Address

XXX . XXX . XXX . XXX

Advanced Network Setup

English

k In step 9, when you select Manual Setup;

Press OK, and the Manual Setup screen will appear. Press

B or b to select Network Name and press OK.

The Software Keyboard window will appear (page 38). Input the Network Name by using the Software Keyboard. To save your setting, press the BLUE button.

Press

B or b to select Authentication and then press

C or c to select Open System, Shared Key, WPA-

PSK or WPA2-PSK.

B or b to select Encryption, and then press C

Press or

c to select None, WEP, TKIP or AES.

NOTE:

• Certain encryption types are only compatible with specific authentication types.

- When Authentication is Open System, only WEP

or None is compatible.

- When Authentication is Shared Key, only WEP is

compatible.

- When Authentication is WPA-PSK or WPA2-PSK,

only TKIP or AES is compatible.

• When incompatible Authentication/Encryption pairings are detected, a warning message will be displayed, and no connection attempt will be made until the incompatibility is resolved.

• There is only one key ID to set for WEP encryption.

B or b to select Security Key and press OK.

Press Input the Security Key by using the Software Keyboard (page 38). To save your setting, press the BLUE button. This item is grayed out when Encryption is None.

When Encryption is WEP, Key ID setting is available. Press

B or b to select Key ID and press C or c to

select 1(default), 2, 3 or 4.

Press

B or b to select Done and press OK.

When the message “Wireless configuration is complete.” appears on screen, press OK.

NOTE: Settings are not saved if BACK is pressed before Done is selected.

l The Advanced Network Setup screen will appear.

When the DHCP function of the router connected with this TV is On, you can set Auto Setup to On or Off. (This should usually be set to On.) Whe n the DH CP fun ction o f the r outer i s Off, set Auto Setup to Off, and set the IP Address DNS address(es) manually.

You can view the fixed MAC address for the TV and for the Dual Band WLAN Adaptor, if one is installed.

Press

B or b to select Next.

m Press OK, and Network Connection Test will start.

A message will appear to indicate if the connection was successful or it could not be completed.

Network connection was completed successfully.

NOTE: The result of Network Connection Test does not always guarantee the connection.

To cancel the Network Connection Test:

Press BACK while searching for the Internet connection.

SETTING UP YOUR TV

Ant/Cable In

Cable

Antenna

Auto Tuning - Antenna

Progress Found

ATV Tune Waiting...

: C7Channel

DTV Tune 3 % 2

PLEASE NOTE

The Quick Setup menu c an also be acc essed at any time from the Setup / System Setup menu.

Auto Tuning - Cable

DTV and ATVTuning Mode

DTV

OthersOperator Selection

Quick ScanScan Type

AutoStart Frequency

AutoEnd Frequency

AutoModulation

AutoSymbol Rate

AutoNetwork ID

Start Scan

n Press OK. If your country supports Network Guide,

English

The Guide Type screen will appear.

Guide Type

Please select Guide Type.

Broadcast Guide

C or c to select Broadcast Guide or

Press

MediaGuide.

NOTE: If you select MediaGuide, it may take time to

access the Guide screen depending on active channel numbers.

o Press OK. If the Ant/Cable In screen appears, press B

b to select Antenna or Cable, and then press OK

to check ( ).

p Select Next and press OK. The Auto Tuning start up

screen will appear with the option to select between DTV and ATV, DTV or ATV if available. Use select the appropriate mode.

C or c to

q Press B or b to highlight Start Scan, and then press

OK.

The television will start to search for available DTV and/or ATV channels. The progress bar will indicate the scan status.

You must allow the television to comp lete the search.

r Press C or c to view the DTV (digital channel) or ATV

(analogue channel) lists.

s Use B or b to move through the list to select a

channel, and then press OK to view.

In ATV mode, some areas may receive duplicate stations. There may not be a clear picture or the signal may be weak, so the station order can be changed using ATV Manual Tuning.

REMEMBER: Press TV at any time to select between ATV and DTV modes.

NOTE: The time will be set automatically by

transmission but can be advanced or decreased by using Local Time Setting in the DTV Settings screen.

Ant/Cable In (if available)

From this menu, you can set the RF input configuration.

a Press MENU / C c to highlight Setup icon.

b Press B / C c to highlight System Setup icon and

press OK.

c Press b to select Ant/Cable In and press C or c to

select Antenna or Cable.

NOTE: When you attempt to change the Ant/Cable In setting, a warning message will appear followed by PIN entry (if PIN has been set) and a prompt for Auto Tuning.

When the search is complete, the television will automatically select channel one.

The Auto Tuning screen will display the total number of services found.

d When Ant/Cable In is set to Cable, the following

setting options will be provided in the Auto Tuning screen.

Press

B or b to select an item and press C or c to

select your desired option.

With the exception of DTV Scan Type and DTV Modulation items, all of the following items will have 2 operating modes. The first is Auto where the values for each item are preset by the system. The second is an Input mode where you will be able to enter a single value in place of the pre-set value. If no channel is currently tuned and the Input state is chosen, a system default value will be shown. However, if a channel is currently tuned when the item is accessed, the value of the current channel will be displayed.

Operator Selection:

You can choose the Cable operator depending on the

Country you set.

DTV Scan Type:

This item determines whether a Quick Scan or a Full Scan will be executed. The Quick Scan is a simplified version of the Full Scan that is designed to complete in less time.

DTV Start Frequency:

This sets the frequency from which the scan will begin.

DTV End Frequency:

This sets the frequency at which the scan will end.

DTV Modulation:

You can choose from five QAM modulation settings.

DTV Symbol Rate:

This is the baud rate (KS/s) of the scan.

DTV Network ID:

This is the Network ID to be utilized for the scan. This item is grayed out when DTV Scan Type is set to “Full Scan”.

Auto Tuning

NOTE: As new services are broadcast, it will be necessary to re-tune the television in order to view them.

Auto Tuning will completely re-tune the television and can be used to update the channel list. It is recommended that Auto

Tuning is run periodically to ensure that all new services are

added. All current channels and settings, i.e. locked channels,

will be lost.

a Press MENU / C c to highlight Setup icon.

SETTING UP YOUR TV

c Press B or b to select Auto Tuning and press OK.

System Setup

Menu Language

Country Ant/Cable In Auto Tuning

ATV Manual Tuning

DTV Manual Tuning DTV Settings

Quick Setup

English

Germany

d Press C or c to select Yes and press OK.

Auto Tuning - Antenna

DTV and ATVTuning Mode

Start Scan

C or c to select DTV and ATV, DTV or ATV, if

Press available, then highlight Start Scan and press OK to continue with the Auto Tuning.

NOTE: If you have selected “Others” for the Country field in the System Setup menu, and selected a tuning mode other than “DTV” , choose the optimum ATV broadcasting system (B/G, I, D/K or L).

The television will start to search for all available DTV and/or ATV services.

You must allow the television to complete the search.

When the search is complete, the Auto Tuning screen will display the services found.

e Press B or b to move through the list to select a

channel and press OK to view.

English

b Press B / C c to highlight System Setup icon and

press OK.

SETTING UP YOUR TV

System Setup

Menu Language

English

Country Ant/Cable In

ATV Manual Tuning

DTV Manual Tuning

Quick Setup

DTV Settings

Auto Tuning

Germany

Pos. Channel Station

ATV Manual Tuning

2 3 4

6 7 8

S10

S40 C22

C25 C28 C30

ATV Manual Tuning

System

ATV Manual Tuning

English

Tuning

The television can be tuned-in manually using ATV Manual

Tuning. For example, you might use the feature if the television

cannot be connected to a media recorder/decoder with a SCART

lead or when you want to tune-in a station on another System.

C and c to move across the screen and select any of the

Use ATV Manual Tuning options. Then use settings.

ATV Manual Tuning

System

123 4 65 7 8 9

1 Position

The number to be pressed on the remote control to tune the channel.

2 System

Specific to certain areas.

3 Colour System

Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from external source.

4 Skip

Set Skip to On ( See page 21.

5 Signal Class

The channel classification.

6 Channel

The channel number on which a station is being broadcast.

7 Search

Search up and down for a signal.

8 Manual Fine Tuning

Only used if interference/weak signal is experienced. See page 72.

9 Station

Station identification. Use the enter up to seven characters.

To allocate a position on the television for a decoder and media recorder: turn the decoder on, insert a pre-recorded film in the media recorder, press PLAY and manually tune.

8) or Off (() for the selected channel.

B or b to adjust the

CVR

B b and C c buttons to

a In the System Setup menu, press b to select ATV

Manual Tuning and press OK.

b Use B or b to select the desired position. We suggest

Pos. 0 for a media recorder.

Different Channel numbers may be displayed.

c Press OK to select. If the channel chosen for the media

recorder is set to skip, Skip should be removed before storing.

d Press c to select System and press B or b to change

if required.

e Then press c to select Search.

f Press B or b to begin the search. The search symbol

will flash.

SETTING UP YOUR TV

PLEASE NOTE

ATV Manual Tuning

Station

CVR

Pos. Channel Station

ATV Manual Tuning

2 3 4

6 7 8

S10

S40 C22

ABC1 ABC1

C25 C28 C30

ATV Manual Tuning

Skip: On

English

g Each signal will show on the television. If it is not your

media recorder, press search.

B or b again to restart the

h When your media rec order si gnal is fo und, pres s c to

move along to Station. Use the required characters, e.g. VCR.

B, b, C and c to put in

i Press OK to save.

j Repeat for each position you want to tune.

k Press EXIT when you have finished.

This television has direct channel entry if the channel numbers are known. Select the ATV Manual Tuning screen in Step 3. Enter the Position number, the System, then C for standard (terrestrial) channels or S for cable channels and the Channel number. Press OK to save.

Skip

To prevent certain channels from being viewed, positions can be

skipped.

a Select ATV Manual Tuning from the System Setup

menu.

b Use B or b to highlight the position to be skipped

and press OK to select.

c Press c to select Skip.

d Use B or b to turn Skip on.

Press OK.

8 on the screen indicates a skipped position.

e Press EXIT and repeat steps 1 through 4 to set other

positions if necessary.

Each position has to be individually selected. To turn Skip off, repeat the procedure for each position.

Skipped positions cannot be selected by P or by the controls on the television but can still be accessed by the number buttons on the remote control.

U and Pu

SETTING UP YOUR TV

Pos. Channel Station

ATV Manual Tuning

2 3 4

6 7 8

S10

S40 C22

ABC1 ABC1

C25 C28 C30

DTV Manual Tuning - Antenna

WEAK

Signal Strength Quality

Channel

GOOD

STRONGAVERAGE

Frequency

842.0 MHz

Bandwidth

Start Scan

8 MHz

Pos.New TypeName

ABC ONE

0 New Channels - Total 6

ABC TWO ABC THREE ABC NEWS 24

DTV Manual Tuning - Antenna

ABCi

English

Channels may be moved and saved to the position of your

Sorting positions

choice.

a Select ATV Manual Tuning from the System Setup

menu.

b With the list of channels showing, use B or b to

highlight the channel you want to move and press

c Use B or b to move through the list to your preferred

position. As you do so, the other channels will move to make room.

d Press C to save your move.

Repeat as necessary and press EXIT.

DTV Manual Tuning

NOTE: This feature varies depending on the Ant/Cable In

setting.

Manual Tuning

This feature is available for service engineers or can be used for

direct channel entr y if the multiplex channel is known.

a Select DTV Manual Tuning from the System Setup

menu and press OK.

b Enter the multiplex number using the number

buttons or use down.

C or c to adjust the number up or

c Highlight Start Scan and press OK. The television will

automatically search for that multiplex.

When the multiplex is found, any channels that are not currently in the channel list will be added and the channel information at the top of the screen will be updated.

d Repeat as necessary. Press EXIT to finish.

SETTING UP YOUR TV

DTV Settings

Channels

Parental PIN Setup

Subtitle and Audio

Parental Control

Local Time Setting Standby Channel Update Common Interface

ABC ONE

Pos. Name

English

Manual Tuning for DVB-C

When Ant/Cable In is set to Cable, DTV Manual Tuning items are as follows:

Frequency – input a specific frequency to be scanned

Modulation – choose from one of five QAM modulation

options

Symbol Rate – input a specific baud rate (KS/s) to be used for the manual scan

DTV Settings

Channels

The channel order may be changed to suit your personal

a Select DTV Settings from the System Setup menu

and press OK.

b Select Channels and press OK.

c For your convenience, you can jump to specific places

in the list by one of two methods.

Channels Antenna TV

Line No. 1/10

Pos. Name

1ABC ONE

2 ABC TWO

7 ABC THREE 30 CABC Channel 40 ABC NEWS 24 51 ABCi

822 AA 823 AC

preference.

Line Number Jump —Use the number buttons

(0-9) to input the line number you want to select and press OK.

It is also possible to change the Position number of a particular channel.

Renumber —Press the RED button to renumber

the highlighted channel. Edit the channel number using the number buttons and press OK. If the position number you input already exists, a confirmation window will appear.

SETTING UP YOUR TV

Channels Antenna TV

1 ABC ONE

2 ABC TWO

Pos. Name

7 ABC THREE 30 CABC Channel 40 ABC NEWS 24 51 ABCi

822 AA 823 AC

Line No. 1/10

Your existing channel order will be lost. Do you wish to continue?

Yes

English

Move feature. Press the channel you wish to move and press OK to check. If you wish to move multiple channels at once, select another channel and check in the same way. Repeat as necessary. Once all desired channels have been checked, press the

B or b buttons to place the focus at the position

to which you wish to move the channels. The channels will be inserted above the highlighted channel. Press the GREEN button to execute the move.

B or b buttons to select the

This is a digital tel evisi on whic h is in tegrat ed to al low th e use of both digital and analogue services. However, during the lifetime of this set it is very likely that analogue services will be switched off to allow for more new digital services.

This ‘switch-off’ will happen in a number of phases, which will be adve rti sed in y our a rea wel l in adva nce . It is r ecom men ded that at each phase the television is re-tuned to ensure that existing and new digital services can be viewed without disruption.

Move — Press the GREEN button to activate the

Analogue switch-off

Position No. Sort — Press the YELLOW button. A

confirmation window will appear. Press select Yes and press OK.

C or c to

Standby Channel Update

If the Standby Channel Update is set to On, when the TV is in

standby mode, Digital Tuning is automatically executed and any

new channels are saved.

a Select DTV Settings from the System Setup menu

and press OK.

b Press b to select Standby Channel Update and

press

C or c to select On.

Location setting

You can select either Home or Store mode. Home is

recommended for normal home use. Select Store when using

a Select Location from the System Setup menu.

b Press C or c to select Home or Store.

the television for displaying in a shop, etc.

CONTROLS AND FEATURES

Quick Menu

Picture Size

Picture Mode AutoView

Super Live

Sleep Timer

More Information Channel Options

Wireless Information

Headphone Level

00:00

Speakers

TV Speakers

English

General controls

Quick Menu

Quick Menu helps you access some options quickly, such as Picture Mode, Picture Size, More Information, Sleep Timer

etc.

Press QUICK to display the Quick Menu and use select the option.

NOTE: Quick Menu items are different depending on the current mode.

Quick menu item example

Mode Quick menu item Description

When viewing a TV programme or pictures from the external input

When using EPG Genre Colour See page 60. USB Media Player (Photo Single View,

Slide Show)

Picture Mode See page 30. Picture Size See page 28. More Information See page 59. Channel Options See page 62. Sleep Timer See page 57. Speakers See page 68. Headphone Level See page 27. Wireless Information See page 35.

Picture See page 30. Sound See page 26. Interval Time See page 51. Repeat See page 51. Background Music See page 51. Play List See page 52. Sleep Timer See page 57. Speakers See page 68. Headphone Level See page 27.

B or b to

Selecting channels

To select a channel, use the numbered buttons on the remote control.

Channels can also be selected using P

To display on-screen information such as channel, input mode or stereo/mono signal, press . Press again to cancel.

U and Pu.

The Time Display – analogue only

The time display facility allows the current (text service) time to

Press to see the time display from the broadcaster. It will remain on screen for about 5 seconds.

NOTE: This display may not be available in some cases.

be seen on the television screen.

D whilst watching a normal television broadcast

Stereo and Bilingual transmissions

For DTV programmes

For ste reo or d ual m ono bro adc asts , pr ess s and use C or

c to select settings.

Mode Display Pressing c

Stereo Stereo S Left S Right

Dual mono Dual 1 Mono – Multichannel –

For multi-audio track broadcasts, press change the audio language (see “Audio languages” on page 63).

For ATV programmes

If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time channels are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear.

Stereo… Press

Bilingual… Bilingual transmissions are rare. If they are

transmitted, the word Dual will be displayed. Choose the required programme number, and if the word Dual appears, press

s to select Stereo or Mono.

s to select Dual 1, Dual 2 or Mono.

S Dual 2 S Dual

s repeatedly to

CONTROLS AND FEATURES

Sound

Dual Balance Advanced Sound Settings

Audio Level Offset TV Speakers Headphone Settings

Dual 1

Stable Sound Off Dynamic Range Control On

Sound controls

English

Volume controls and sound mute

Volume

2+ or 2– to adjust the volume.

Press

Sound Mute

Press once to turn the sound off and again to cancel.

Dual

If a programme or film is being broadcast with a soundtrack in

more than one language, the Dual feature allows selection

between them.

a Press MENU / C c to highlight Setup icon.

b Press B / C c to highlight Sound icon and press OK.

c Press B or b to select Dual and press C or c to

choose between Dual 1 or Dual 2.

Voice Enhancement

Voice Enhancement emphasises the frequency range of the

speaker’s voice, making it easier to catch what they are saying.

a In the Advanced Sound Settings menu, press B or

b to select Voice Enhancement.

b Press C or c to select On or Off.

Dynamic Bass Boost

Dynamic Bass Boost enhances the depth of the sound on the

TV speakers. The difference will only be noticeable on sound with

strong bass.

a In the Advanced Sound Settings menu, press B or

b to select Dynamic Bass Boost.

b Press C or c to select the desired bass expansion level

(Low, High or Off).

Stable Sound®

Stable Sound reduces the volume level differences between channels. It automatically remains on the same volume level

when you change channels.

a In the Sound menu, press B or b to select Stable

Sound.

b Press C or c to select On or Off.

Balance

a In the Sound menu, press B or b to select Balance

and press

C or c to emphasize left or right speaker

balance.

Bass, Treble

a In the Sound menu, press B or b to select Advanced

Sound Settings and press OK.

b Press B or b to select Bass or Treble.

c Press C or c to change the setting.

Dynamic Range Control

This feature allows control of audio compression for some digital

TV programmes (MPEG-1 and MPEG-2 audio programmes are

not supported).

a In the Sound menu, press B or b to select Dynamic

Range Control.

b Press C or c to select On or Off.

CONTROLS AND FEATURES

-5

Audio Level Offset

ATV

DTV 2ch

External Input

Audio Description

Mixing Level

Audio Description

English

Audio Level Offset

Sometimes there can be large changes in volume when

switching from a DTV 5.1ch to a DTV 2ch, an ATV channel, or an

external input. Using the Audio Level Offset feature reduces

these volume differences.

a Set the volume level usually used when watching a

DTV 5.1ch programme.

b Tune to a channel which is DTV 2ch, ATV or an

external input.

c In the Sound menu, press B or b to select Audio

Level Offset and press OK.

d Press B or b to se lect an o ption, and then press C or

c to adjust the volume level.

NOTE:

• The available item changes depending on the current inpu t source. For example, while watching a DTV 2ch programme, only DTV 2ch is available and the other two items are grayed out in the menu. This allows you to easily adjust according to each condition.

• When watching a DTV 5.1ch programme, this feature is not available.

TV Speakers On/Off

This feature allows you to turn the TV speakers off when

connecting the audio system.

a In the Sound menu, press B or b to select TV

Speakers.

b Press C or c to select Off.

To turn on the built-in speakers:

Choose On in step 2.

Headphone Settings

This setting is used to set the sound output when headphones are

Speaker Link Headphone Speakers

On Sound is output

Off Sound is output

connected.

2 ± is available.)

(

(Headphone level menu is available.)

No sound

Sound is output

2 ± is available.)

(

a In the Sound menu, press B or b to select

Headphone Settings and press OK.

b Press B or b to select Speaker Link and press C or c

to select On or Off.

c If you select Off, then highlight Headphone Level

and use

C or c to adjust the headphone sound.

Headphone Settings

Speaker Link

Headphone Level

Audio Description

Audio Description is an additional narrative sound track for

visually impaired individuals to understand and enjoy the story

line more fully. The letters AD will be displayed in the channel

banner when programmes contain AD content.

a In the Sound menu, press B or b to select Audio

Description and press OK.

b Press B or b to select Audio Description and press

C or c to select On.

The AD button on the Remote can also be used to toggle the Audio Description feature between On and Off.

c To adjust the level of the audio description sound to

the main sound, highlight Mixing Level and press or

CONTROLS AND FEATURES

SUBTITLE

SUPER LIVE

This setting will enlarge a 4:3 image

to fit the screen by stretching the

image horizontally and vertically,

holding better proportions at the

centre of the image. Some distortion

may occur.

When subtitles are included on a

letterbox format broadcast, this

setting will raise the pictu re to ensure

that all the text is displayed.

CINEMA

When watching ‘all sides panel

format’ films/video tapes, this setting

will eliminate or reduce the black

bars at all sides of the screen by

zooming in and selecting the image

without distortion.

Use this setting when watching a

widescreen DVD, widescreen video

tape or a 16:9 broadcast (when

available). Due to the range of

widescreen formats (16:9, 14:9, 20:9

etc.) black bars may be visible on the

top and bottom of the screen.

Use this setting to view a true 4:3

broadcast.

Use this setting when watching a

14:9 broadcast.

Widescreen viewing

English

Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats.

WIDE

4:3

14:9

CONTROLS AND FEATURES

Dot by Dot

PC NORMAL

This setting will show the picture

without overscan, i.e. WYSIWYG.

This option is only available when

watching a PC signal source via

HDMI or PC terminal.

PC WIDE

This setting will show the picture

without overscan or side panels.

This option is only available when

watching a PC signal source via

HDMI or PC terminal.

“Dot by Dot” is a non-scaling display. Depending on the input signal format, the picture is displayed with side panels and/or bars at the top and bottom (e.g.

VGA input source).

NATIVE

This setting will show the picture without overscan, i.e. WYSIWYG.

AV format PC format

English

Press the button on the Remote to display the list of available widescreen formats.

Press the button repeatedly to highlight the required format.

The Quick Menu feature can also be used to select Picture Size.

Picture Size

Wide 4:3 Super Live

Cinema Subtitle

14:9 Native

Picture Size

PC Normal

PC Wide Dot by Dot

Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public display or commercial gain may infringe on copyright laws.

CONTROLS AND FEATURES

Picture

Picture Mode

Reset

Backlight

Colour Tint Sharpness

100 100

Standard

Contrast Brightness

Advanced Picture Settings

ColourMaster

Base Colour Adjustment

Colour Temperature

Noise Reduction Cinema Mode

Off

Low

Auto Brightness Sensor Active Backlight Control

Middle

Off

Black/White Level

Picture controls

English

Most of the picture controls and functions are available in both digital and analogue modes.

PLEASE NOTE: Features not available will be grayed out.

Picture Mode

This television offers the choice of personalising the picture style.

AutoView, Dynamic, Standard, Hollywood 1, Hollywood 2,

Store, Game and PC are preset options and affect many

features/settings within the television .

NOTE:

• Because the AutoView mode automatically adjusts picture settings based on ambient light conditions and input signal content, the Auto Brightness Sensor menu is grayed out when it is selected.

• Store mode is only available when Location is set to Store.

• Game mode is available in external input mode (other than aerial input). When you select Game mode, suitable widescreen formats will be selected.

• PC mode is available in RGB/PC input mode or HDMI input mode.

a Press MENU / C c to highlight Setup icon.

b Press B /C c to highlight Picture icon and press OK.

c Press B or b to select Picture Mode.

Picture preferences

You can customize current picture mode settings as desired. For

example, while selecting “Dynamic”, i f y ou c ha ng e th e f oll ow in g

items, such as Backlight, Contrast, Brightness, Colour, Tint,

Sharpness and the Advanced Picture Settings items, your

new settings are saved for “Dynamic” picture mode.

a In the Picture menu, press B or b to select either

Backlight, Contrast, Brightness, Colour, Tint or Sharpness and press OK.

b Press C or c to adjust the settings.

Reset

This feature resets all picture settings to the factory settings

except Picture Mode.

a In the Picture menu, press B or b to select Reset and

press OK.

b A confirmation message will appear. Press C or c to

select Yes and press OK.

ColourMaster

When ColourMaster is set to On, it allows the ‘Base Colour

Adjustment’ feature to become available.

a In the Picture menu, press B or b to select

Advanced Picture Settings and press OK.

d Press C or c to select the picture mode you prefer

and press OK.

The Picture Mode can also be selected using the button on the remote control.

NOTE: The picture mode you select affects the current input only. You can select a different picture mode for each input.

b Press b to select ColourMaster.

c Press C or c to select On or Off and press OK.

CONTROLS AND FEATURES

Hue

Saturation

Reset

Brightness

0Red

Green

Blue Yellow Magenta Cyan

00 000 000 000 000 000

Base Colour Adjustment

Hue Saturation Brightness

0Red 0 -1

English

Base Colour Adjustment

The Base Colour Adjustment feature allows the adjustment of individual colours to suit personal preference. This can be useful

when using an external source.

a In the Advanced Picture Settings menu, press B or

b to select Base Colour Adjustment and press OK.

b Press B or b to select an option and press c to move

to the adjustment window.

c Press C or c to select Hue, Saturation or Brightness

and press

B or b to adjust the settings as required.

d Press BACK to return to the previous menu.

To return to the factory settings, select Reset and press OK.

Colour Temperature

Colour Temperature increases the ‘warmth’ or ‘coolness’ of the

picture by increasing the red or blue tint.

a In the Advanced Picture Settings menu, press B or

b to select Colour Temperature and press OK.

b Press B or b to select Colour Temperature and

press

C or c to select Cool, Natural or Warm to suit

your preference.

c Press B or b to select Red Level, Green Level or

Blue Level and press

NOTE: To return the adjustments to the factory defaults, select Reset and press OK.

C or c to adjust the level.

Auto Brightness Sensor

When the Auto Brightness Sensor is activated, it will

automatically optimise the backlighting levels to suit ambient

light conditions.

a In the Advanced Picture Settings menu, press B or

b to select Auto Brightness Sensor.

b Press C or c to select On or Off.

Active Backlight Control

When the Active Backlight Control feature is activated, it will

control the backlighting levels depending on various scenes such

as picture motion, bright scene or dark scene.

a In the Advanced Picture Settings menu, press B or

b to select Active Backlight Control.

b Press C or c to select High, Low or Off.

High: To control the backlighting levels depending

on various scenes such as picture motion, bright scene or dark scene

Low: To control the backlighting levels for dark scene

Black/White Level

Black/White Level increases the strength of dark areas of the

picture to improve the definition.

a In the Advanced Picture Settings menu, press B or

b to select Black/White Level.

b Press C or c to select High, Middle, Low or Off.

MPEG NR – Noise Reduction

When watching a DVD, the compression may cause some words

or picture elements to become distorted or pixelated.

Using the MPEG NR feature reduces this effect by smoothing out

the edges.

a In the Advanced Picture Settings menu, press B or

b to select Noise Reduction and press OK.

b Press b to select MPEG NR.

Noise Reduction

MPEG NR DNR

Low

Auto

c Press C or c to select Low, Middle, High or Off to suit

your preference.

CONTROLS AND FEATURES

Auto Format On 4:3 Stretch Off

Picture Position PC Settings

Display Settings

Auto Format On 4:3 Stretch Off Picture Position PC Settings

Display Settings

Picture Position

Horizontal Position

Reset

Vertical Position

English

DNR – Digital Noise Reduction

DNR allows you to ‘soften’ the screen representation of a weak

signal to reduce the noise effect.

a Select DNR from the Noise Reduction menu. b Press C or c to select Low, Middle, High, Auto or Off.

The differences may not always be noticeable (for the best result use lower settings as picture quality can be lost if the setting is too high).

Cinema Mode

The frame rate of a movie film is generally 24 frames a second

whereas the movie software such as DVD, etc. that you enjoy

watching on television at home is 30 or 25 frames a second. The difference in frame rate may cause flickers while viewing the films on television; set the Cinema Mode to convert the signa l to

reproduce a smooth motion and picture quality.

a In the Picture menu, press b to select Advanced

Picture Settings and press OK.

b Press b to select Cinema Mode and press C or c

select from On or Off.

NOTE: When Picture Mode is set to Game or PC, this feature

will be grayed out and automatically set to Off.

Resetting the advanced picture settings

This feature allows you to reset the current Advanced Picture

Settings to the default values.

a In the Advanced Picture Settings menu, press B or

b to select Reset.

b Press OK.

4:3 Stretch

When 4:3 Stretch is activated, the size switching system

changes 4:3 programmes into full screen picture.

a In the Preferences menu, press B or b to select

Display Settings and press OK.

b Press B or b to select 4:3 Stretch and press C or c to

select On or Off.

Blue Screen

When Blue Screen is selected, the screen will turn blue and the

sound will be muted on analogue channels and external input

NOTE: Some external input sounds may not be muted.

modes when no signal is received.

a In the Preferences menu, press B or b to select Blue

Screen.

b Press C or c to select On or Off.

Picture Position

The picture position may be adjusted to suit personal preference

and can be particularly useful for external inputs.

NOTE: The Picture Position feature cannot be selected in the DTV mode.

a In the Preferences menu, press B or b to select

Display Settings and press OK.

b Press B or b to select Picture Position.

Automatic Format (Widescreen)

When this television receives a true Widescreen picture and Auto

format is On, it will automatically be displayed in Widescreen

format irrespective of the television’s previous setting.

a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preferences icon and

press OK.

c Press B or b to select Display Settings and press OK. d Press B or b to select Auto Format and press C or c

to select On or Off.

c Press OK to view the options available for the picture

format that has been selected.

d Press B or b to select an option and press C or c to

adjust the settings.

The options differ depending on the currently selected widescreen format and the input signal.

To return to the original factory settings, select Reset in the Picture Position menu and press OK.

Picture still

This feature is used to hold a still image on the screen.

a Press r to hold an image on the screen, and press

r again to cancel.

Using your home network

This TV is a DLNA CERTIFIED™ Player. This TV can play digital content stored on a DLNA CERTIFIED™ product with server function. If you want to use this TV as a DLNA CERTIFIED™ Player, you will have to configure the network on your TV (see page 13).

If you want to use your home network, you will have to configure the network on your TV. (see page 13) Change the network settings if necessary (see “Setting up the Network” on page 34).

When using a wireless home network:

Wireless Interoperability

The TOSHIBA Dual Band WLAN Adaptor is designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS)/Orthogonal Frequency Division Multiplexing (OFDM) radio technology, and is compliant to:

• The IEEE 802.11 Standard on Wireless LANs (Revision a/b/g/

n), as defined and approved by the Institute of Electrical and Electronics Engineers.

• The TOSHIBA Dual Band WLAN Adaptor is intended for use

with the RL93/SL97/RL95 series LCD TV’s and should not be used with any other devices.

Use of the WLAN Adaptor in other USB products may result in damage to the WLAN Adaptor and or the equipment. Such use will void any warranty that may otherwise apply, and TOSHIBA will have no liability for any damage that may result from such use.

CAUTION

Bluetooth™ and Wireless LAN devices operate within the same radio frequency range and may interfere with one another. If you use Bluetooth™ and Wireless LAN devices simultaneously, you may occasionally experience a less than optimal network performance or even lose your network connection.

If you should experience any such problem, immediately turn off either your Bluetooth™ or Wireless LAN device.

Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage.

Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions.

CONTROLS AND FEATURES

Wireless LAN and your Health

Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices, however, is far less than the electromagnetic energy emitted by wireless devices such as mobile phones.

Because Wireless LAN products operate with in the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

In some situations or environments, the use of Wireless LAN may be restricted by the proprietor of the building or responsible representatives of the organization. Such restrictions may apply in environments where the risk of interference to other devices or services is perceived or identified as harmful.

If you are uncertain of the policy that applies to the use of wireless devices in a specific organization or environment, you are encouraged to ask for authorization to use the Wireless LAN device prior to turning on the equipment.

This Dual Band Wireless LAN Adaptor may be operated in the following countries:

AT Austria IS Iceland BE Belgium LI Liechtenstein CH Switzerland LT Lithuania CY Cyprus LU Luxembourg CZ Czech Republic LV Latvia DE Germany MT Malta DK Denmark NL Netherlands ES Spain NO Norway FI Finland PL Poland FR France PT Portugal GB United Kingdom SE Sweden GR Greece SI Slovenia EE Estonia SK Slovakia HU Hungary BG Bulgaria IT Italy RO Romania IE Ireland TR Turkey

How to use this Dual Band Wireless LAN Adaptor

• If this device is going to be operated in the frequency ran ge of 5.15 GHz to 5.35 GHz, it is restricted to indoor use.

• If this device is going to be operated for 802.11 b/g/n function in the frequency range of 2.454 GHz to 2.4835 GHz in France, it is restricted to indoor use.

• A general authorization is required for using this device outdoors or in public places in Italy.

• This device is NOT ALLOWED to be used in the geographical area wit hin a radius of 20km from the centre of Ny-Alesund in Norway.

English

CONTROLS AND FEATURES

REGZA-LINK Setup

Panel Lock

Off

Auto

Network Setup

Teletext

Guide Type Network Device Setup

Off

Network Lock

Recording Setup

Preferences

Network Type Wired

Network Connection Test

Advanced Network Setup

Network Setup

Wireless Setup

Setting up the Network

English

You can select the Network Type.

a Press MENU / C c to highlight Setup icon.

b Press B / C c to highlight Preferences icon and

press OK.

c Press B or b to select Network Setup and press OK.

d Press B or b to select Network Type and press C or

c to select Wired or Wireless.

NOTE: If the Dual Band WLAN Adaptor is not

connected, Wireless cannot be selected.

e If you selected Wired, see “Advanced Network Setup”

on page 36.

Wireless Setup

NOTE:

• This feature is grayed out when the Dual Band WLAN Adaptor is not connected or Network Type is set to Wired.

• When you insert or remove the wireless LAN adaptor, you must turn off your TV and unplug the power cord, and then plug and turn on again.

• Continued connection of AP (Access Point) is not guaranteed. The connection may be disconnected while watching TV.

• Do not remove the Dual Band WLAN Adaptor when Network Type is set to Wireless or wireless communication is active.

There are 2 methods for Wireless Setup:

Assisted setup by using the Wi-Fi Routers notification information.

Network name, Authentication and Encryption are decided based on information sent from the Wi-Fi router. Security key to be set manually.

Manual setup

Network name, Authentication, Encryption and Security Key all to be inputted manually.

Assisted Setup

a In the Preferences menu, press B or b to select

Network Setup and press OK.

b Press B or b to select Network Type and press C or

c to select Wireless.

c Press B or b to select Wireless Setup and press OK.

d Press B or b to select Assisted Setup and press OK.

Wireless Setup

Assisted Setup Manual Setup

e Press B or b to select the desired AP and press OK.

NOTE: Check the MAC address on the label of the AP

or in the manual, and select your AP.

f Highlight Security Key and press OK. The Software

Keyboard window will appear.

g Input the Security Key by using the Software

Keyboard (see page 38). To save your setting, press the BLUE button.

NOTE:

• The Security Key must adhere to these conditions:

- TKIP/AES: 8-63 ASCII or 64 Hex characters

- WEP: 5 or 13 ASCII or 10 or 26 Hex characters

• There is only one key ID to set for WEP encryption.

h Highlight Done and press OK.

NOTE: If Network Name is not displayed, see step 4

and 5 in Manual Setup below to set Network Name before pressing Done.

NOTE: Settings are not saved if BACK is pressed before Done is selected.

Manual Setup

a In the Preferences menu, press B or b to select

Network Setup and press OK.

b Press B or b to select Network Type and press C or

c to select Wireless.

c Press B or b to select Wireless Setup and press OK.

d Press B or b to select Manual Setup and press OK.

e Press B or b to select Network Name and press OK.

Quick Menu

Picture Size

Picture Mode AutoView

Super Live

Sleep Timer

More Information Channel Options

Wireless Information

Headphone Level

00:00

Speakers

TV Speakers

The Software Keyboard window will appear.

f Input the Network Name by using the Software

Keyboard (see page 38). To save your setting, press the BLUE button.

g Press B or b to select Authentication and press C or

c to select Open System, Shared Key, WPA-PSK or

WPA2-PSK.

h Press B or b to select Encryption and press C or c

to select None, WEP, TKIP or AES.

NOTE:

• Certain encryption types are only compatible with specific authentication types.

- When Authentication is Open System, only WEP

or None is compatible.

- When Authentication is Shared Key, only WEP is

compatible.

- When Authentication is WPA-PSK or WPA2-PSK,

only TKIP or AES is compatible.

• When incompatible Authentication/Encryption pairings are detected, a warning message will be displayed, and no connection attempt will be made until the incompatibility is resolved.

• There is only one key ID to set for WEP encryption.

i Press B or b to select Security Key and press OK.

j Input the Security Key by using the Software

Keyboard (see page 38). To save your setting, press the BLUE button.

NOTE: This item is grayed out when Encryption is None.

k Highlight Done and press OK.

NOTE: When Encryption is None, a message will

appear. Press

NOTE: Settings are not saved if BACK is pressed before Done is selected.

C or c to select Yes and press OK.

CONTROLS AND FEATURES

Wireless Information

The settings configured in Wireless Setup can be confirmed.

a Press QUICK to open the Quick Menu.

b Press B or b to select Wireless Information and

press OK.

c When the Network Type is Wireless, a Wireless

Information window will appear.

NOTE: Press the RED button to scan for all APs.

Item Description

Status Connected is displayed when the TV is

Signal Connection signal strength with AP

Speed Link with AP Mode Working mode (11a, 11b, 11g, 11n) Network Name SSID set Authentication Authentication set Encryption Encryption set Security Key Security Key set AP MAC Address The AP’s MAC address is displayed when

TV MAC Address The MAC address of the USB (Dual Band

DHCP Enabled is displayed when using DHCP.

IP Address The TV’s IP address Subnet Mask Value of the Subnet Mask Default Gateway Address of the Default GATEWAY DNS Address of the DNS

connected with the AP. Disconnected is displayed when the TV is not connected with the AP.

(STRONG/MEDIUM/WEAK)

the TV is connected with the AP.

WLAN Adaptor) is displayed.

Disabled is displayed when not using DHCP.

English

CONTROLS AND FEATURES

Network Type Wired

Advanced Network Setup

Network Setup

Wireless Setup

IP Address Setup

MAC Address

DNS Setup

Advanced Network Setup

Auto Setup Off

Subnet Mask

IP Address Setup

IP Address

xxx . xxx . xxx . xxx xxx . xxx . xxx . xxx

Default Gateway

xxx . xxx . xxx . xxx

NOTE: Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or TKIP, the Speed value might be low. It is

English

recommended that Encryption be changed to AES (see “Manual Setup” on page 34).

Notes on wireless LAN environment:

• The function of all IEEE802.11 is not supported.

• The ad-hoc mode is not supported.

• It is recommended to use IEEE 802.11a or IEEE 802.11n on 5 GHz for audio and SD video streaming.

• It is recommended to use IEEE 802.11n on 5 GHz for HD video streaming.

• It is recommended that the encoding rate for streaming video content is 20 Mbps or less.

• It is not recommended to use 2.4 GHz for audio and video streaming.

• Content playback may be interrupted by various surrounding interference.

Advanced Network Setup

NOTE:

• When the DHCP function of the router connected with this TV is On, you can set Auto Setup to On or Off. (This should usually be set to On.)

• When the DHCP function of the router is Off, set Auto Setup to Off, and set the IP Address manually.

IP Address Setup

Auto Setup:

a In the Preferences menu, press B or b to select

Network Setup and press OK.

b Press B or b to select Advanced Network Setup

and press OK.

d Highlight Auto Setup and press C or c to select On.

IP Address Setup

Auto Setup On

IP Address

Subnet Mask

Default Gateway

NOTE: Other items will be grayed out when Auto Setup is s et to On.

xxx . xxx . xxx . xxx

. . .

Manual Setup:

a In the Preferences menu, press B or b to select

Network Setup and press OK.

b Press B or b to select Advanced Network Setup and

press OK.

c Press B or b to select IP Address Setup and press

OK.

d Highlight Auto Setup and press C or c to select Off.

e Press B or b to select IP Address.

f Press C or c to highlight the field you want to

change, and then use the number buttons to input the IP address. To save the setting, press OK.

NOTE: IP address field numbers must be between 0 and 255. After each field number has been set, press OK to store the entire address. If the entire IP Address is invalid, a warning message will appear after OK is pressed.

c Press B or b to select IP Address Setup and press

OK.

g Press B or b to select Subnet Mask, and edit in the

same way as IP Address.

IP Address Setup

Auto Setup Off IP Address Subnet Mask Default Gateway

xxx . xxx . xxx . xxx xxx . xxx . xxx . xxx xxx . xxx . xxx . xxx

h Press B or b to select Default Gateway, and edit in

the same way as IP Address.

NOTE: If you manually set the IP address, you must not use the same IP address for any other device. The IP address you use should be a private address.

DNS Setup

Auto Setup Off

Secondary DNS Address

DNS Setup

Primary DNS Address

xxx . xxx . xxx . xxx xxx . xxx . xxx . xxx

NOTE: When the DHCP function of the router connected to this TV is Off, set Auto Setup to Off, and manually set the DNS address(es). Your internet service provider should have provided these to you.

Auto setup:

a In the Preferences menu, press B or b to select

Network Setup and press OK.

b Press B or b to select Advanced Network Setup and

press OK.

c Press B or b to select DNS Setup and press OK.

d Press B or b to highlight Auto Setup and press C or

c to select On.

NOTE: Other items will be grayed out when Auto Setup is set to On.

Manual setup:

a In the Preferences menu, press B or b to select

Network Setup and press OK.

b Press B or b to select Advanced Network Setup and

press OK.

c Press B or b to select DNS Setup and press OK.

CONTROLS AND FEATURES

MAC Address

You can view the fixed MAC address for the TV and for the Dual Band WLAN Adaptor, if one is installed.

a In the Preferences menu, press B or b to select

Network Setup and press OK.

b Press B or b to select Advanced Network Setup and

press OK.

c Press B or b to select MAC Address and press OK.

Network Connection Test

This function checks the Internet connectivity.

a In the Preferences menu, press B or b to select

Network Setup and press OK.

b Press B or b to select Network Connection Test and

press OK.

A message will appear to indicate if the connection was successful or if it could not be completed.

NOTE: The result of Network Connection Test does not always guarantee the connection.

To cancel the Network Connection Test:

a Press BACK while searching for the Internet

connection.

English

d Press B or b to select Auto Setup and press C or c

to select Off.

e Press B or b to select Primary DNS Address.

f Press C or c to highlight the field you want to

change, and then use the number buttons to input the Primary DNS Address. To save the setting, press

OK.

NOTE: DNS address field numbers must be between 0

and 255. If you input an incompatible number and press OK, the field number will reset to the previous value.

g Press B or b to select Secondary DNS Address, and

edit in the same way as Primary DNS Address.

CONTROLS AND FEATURES

ABCDEFG

AAA|

HIJKLMN

OPQRSTU

VWXYZ

English

Using the software keyboard

You can enter text by using the Software Keyboard. The Software Keyboard window will appear when you press OK on a field that

accepts character input.

To enter text using the software keyboard:

a Highlight the desired character on the on-screen

software keyboard.

b Press OK.

c Repeat steps 1 and 2 until you have entered all

desired text.

d Press the BLUE button to close the software keyboard

and return to the previous screen.

NOTE: If BACK is pressed, changes are not saved and the software keyboard window is closed. The text will remain as it was before starting the keyboard.

Input operation on the remote control:

Button Description OK Inputs the selected character. 0-9 Inputs the number directly.

B b C c Moves the character highlight. CC cc Moves the cursor. Z

RED Deletes 1 character to the left of

GREEN Cycles through upper case, lower

BLUE Saves changes and closes the

BACK Closes the Software Keyboard

Moves the cursor to the head of a character string.

Moves the cursor to the end of a character string.

the cursor.

case, numbers, and symbols, if available.

Software Keyboard window.

window without saving changes.

Network Device Setup

External Control Setup

This setup allows you to operate a home network-connected

Media Controller Setup

a In the Preferences menu, press B or b to select

b Press B or b to select External Control Setup and

c Press B or b to select an option and press OK.

NOTE: Toshiba does not guarantee normal operation with all connected devices.

your TV from an external device.

Network Device Setup and press OK.

Preferences

Recording Setup REGZA-LINK Setup Network Setup Guide Type Network Device Setup Teletext

Network Lock

Panel Lock

press OK.

The Software Keyboard window will appear.

User Name — Input the User Name (to control the TV from the iPhone etc.) by using the on-screen software keyboard (see page 38). The maximum number of characters is 16.

Password — Input the Password (to control the TV from the iPhone etc.) by using the on-screen software keyboard (see page 38). The maximum number of characters is 16.

Auto

Off

Device Name Setup

The TV’s device name can be changed.

a In the Preferences menu, press B or b to select

Network Device Setup and press OK.

b Press B or b to highlight Device Name Setup and

press OK.

c Highlight the Device Name field and press OK. The

Software Keyboard window will appear.

d Input the Device Name by using the software

keyboard (see page 38). Press the BLUE button.

NOTE: The Device Name can be up to 15 characters

long.

e Highlight Done and press OK to save your setting.

CONTROLS AND FEATURES

English

CONTROLS AND FEATURES

To USB port

USB cable (not supplied)

USB HDD

USB HDD Record Function

English

Th is fu nct io n c an be u se d t o re co rd an d pl ay di git al broadcast programmes. Read the precautions below before recording or viewing programmes using the USB HDD record function.

NOTE:

• In order to use this function a USB HDD needs to be connected to the TV.

• Recorded programmes saved on the USB HDD can only be viewed on this TV. They cannot be viewed when connect ed to another TV (including the same model of TV), a PC, or other device.

• You cannot watch one channel while recording another.

• If the recording time to the USB HDD is too short, no data may be saved.

• You cannot record video input signals on the USB HDD.

• Not all types of broadcast may be recordable.

• After programming the TV to record digital broadcasting, do not disconnect the power plug before recording starts. Also, leaving the power switch “ON” until recording is scheduled to start, may cause the recording to fail.

• Should video or audio recording fail due to malfunction of the TV or poor reception, no compensation shall be paid.

• If there is a power failure or the power plug is disconnected during programmed recording, recording will stop and will not resume when the power returns or the plug is reconnected.

• Do not disconnect the power plug when the indicator LED is lit.

• Any changes implemented by the broadcasting station may affect programme scheduling.

• Scheduling of multiple consecutive programmes may result in the beginning of each programme not being recorded.

• Programmed recording cannot take place if the power plug is not connected.

• Disconnecting the power plug during recording may result in failure to save the recorded programme.

•USB HDD recording feature not available in all countries.

• Do not turn off the TV during recording.

• When the USB HDD is formatted, all the data stored on the HDD will be deleted.

Setting up the USB HDD for recording

To connect an USB HDD (not supplied)

When you connect a USB HDD to the USB port on the TV, a prompt will appear.

a Press C or c to select No and press OK.

NOTE: Not guaranteed to work with all USB HDD.

To record DTV programmes

(One Touch Recording)

To record the programme currently being viewed.

a Press the zREC button on the remote control.

The currently viewed programme will start to be recorded. The programme indicator (red) will be lit.

To stop recording

a Press the v (stop) button.

A confirmation window “Do you want to stop Recording?” will appear.

b Press C or c to select Yes and press OK.

Recording will stop.

How to set recordings via the

Edit Timer

The Daily Politics

10:50 Tue, 26 Apr

Timer Type

Channel2 CABC

11:30 - 12:30 Tue, 26 Apr

Recording

Set Timer Delete Timer

Edit Timer

The Daily Politics

10:50 Tue, 26 Apr

Timer Type

Channel2 CABC

11:30 - 12:30 Tue, 26 Apr

Recording

Set Timer Delete Timer

Programme Guide

Programmed recording can be scheduled easily using the

Programme Guide or by specifying the date and time.

PLEASE NOTE:

When a timed programme is about to start, an information screen will appear offering the option of watching or cancelling the programme. Other channels will not be available during the timed programme unless the programme timer is cancelled.

It will only be possible to create or edit programme timers for the currently tuned DTV input.

Using the Programme Guide to set future recordings

a Press the GUIDE button on the remote control (or

select TV Programmes / Guide menu from the menu system) to display the Electronic Programme Guide (EPG).

b Press B b C c to highlight the programme you want

to record.

c Press OK. The Edit Timer menu will appear.

CONTROLS AND FEATURES

To search for and record a programme using Genre Search

a Press MENU / C c / B / C c to highlight

TV Programmes / Genre Search icons and press OK to access the Genre Search screen.

Genre Search 10:50 Tue, 6 Apr

Movies

AB134

PARIS PREMIERE

NT1

AB1

NT1 31 PARIS PREMIERE 9 W9 11 NT1

31 PARIS PREMIERE 11 NT1 11 NT1 34 AB1

Hard Rain

Red Corner The Lawnmower Man

A Vow to Kill Parenthood Body and Soul The Nun’s Story

Red Corner The Real Blonde Critters Indiana Jones and the Temple of Doom The jackal

Coup De Ville

Wed,27 Apr 0:15- 1:45

Wed,27 Apr 22:15- 23:55 Thu,28 Apr 1:20- 3:00

Fri,29 Apr 1:30- 3:00 Sat,30 Apr 0:45- 2:40 Sat,30 Apr 1:15- 3:00 Sat,30 Apr 15:00- 17:30 Sat,30 Apr 23:20- 1:15 Sun,1 May 0:40- 2:00 Sun,1 May 0:40- 2:20 Sun,1 May 21:10- 23:20 Sun,1 May 23:20- 1:15 Mon,1 May 1:10- 3:00

b Press C or c to select the genre. Programmes listed

will change for the new genre. Press B or b to select the programme for which you want to schedule recording.

c Press OK. The Edit Timer menu will appear.

English

d Press B or b to highlight Timer Type and press C or

c to select Recording.

e Press B or b to highlight Set Timer and press OK.

The ORANGE LED will be lit.

d Press B or b to highlight Timer Type and press C or

c to select Recording.

e Press B or b to highlight Set Timer and press OK.

The ORANGE LED will be lit.

CONTROLS AND FEATURES

Edit Timer

10:50 Tue, 26 Apr

Repeat

Date Start Time End Time

Channel

Once

Timer Type

Recording

Set Timer Delete Timer

30 CABC Channel

10:51

11:51

Tue, 26 Apr 2011

Edit Timer

The Daily Politics

10:50 Tue, 26 Apr

Timer Type

Channel2 CABC

11:30 - 12:30 Tue, 26 Apr

Recording

Set Timer Delete Timer

To programme the timer

English

a Press MENU / C c / B / C c to highlight

TV Programmes / Programme Timers icons and press OK.

b Select the unprogrammed column (blank column)

and press OK. The Edit Timer menu will appear.

c Press B or b to highlight Timer Type and press C or

c to select Recording.

d Press B and b to go through the list adding the

details of the programme by using the number buttons and C and c to make selections.

Channel:

Select the channel you wish to record.

Date:

Select the date that you wish recording to start.

Start Time:

Select the time to start recording.

End Time:

Select the time to end recording.

Repeat:

Select “Once”, “Daily” or “Weekly”.

Once The selected content is recorded once. Daily The same time slot on the same channel is

recorded every day on and after the selected day.

Weekly The same time slot on the same channel on the

sa me da y of the week is recorded on and after the selected day.

e Press B or b to highlight Set Timer and press OK.

The ORANGE LED will be lit.

To schedule a programme using the information screen

a Press , the information screen will appear giving

details of the channel and programme currently being viewed.

CHANNEL Z

AD English

MLB Young’s two-run triple leads AL over NL

Now

16:9

Also

AD 18

World News and Sports

MLB Young’s two-run triple leads AL over NL

Change

b Press B or b to select the Next and press OK. The Edit

Timer menu will appear.

c Press B or b to highlight Timer Type and press C or

c to select Recording.

d Press B or b to highlight Set Timer and press OK.

The ORANGE LED will be lit.

To check, edit or delete scheduling

information

You can check, edit or delete scheduling information.

a Press MENU / C c / B / C c to highlight

TV Programmes / Programme Timers icons and press OK. Programme Timers screen will appear.

Recording List:

• Depending on the transmitter information, the programme broadcast time or other information may not be correctly displayed in the recording list.

• The programme does not appear in the recording list immediately at the start of recording, but appears a few minutes after recording starts.

• Up to 500 programmes can be displayed in the recording list.

• If the channel settings are changed, the digital channel number, or other information may not appear correctly in the recording list.

News

6:00 Thu, 11 Oct

6:00- 8:00

15 min left

8:00- 9:00

• As the displayed programme time is calculated

Sun Mon Tue Thu Fri SatWed

Sort : New

WWWWWW WWWWWWWWWWWW

WWWWW

14:15 Wed, 16 Feb

WWWWWWW WWWWWWW

WWWWWWW

WWWWWWW WWWWWWW WWWWWWW WWWWWWW WWWWWWW

Library

All

1235 ITV London

ASTRA 19.2°E

USB HDD3 Remaining Capacity: 86% (912.0GB)

10 July 2011 14:30(01:30)

Wed, 16 Feb 10:00 Wed, 16 Feb 10:00

Thu, 17 Feb 10:00 Thu, 17 Feb 10:00

Fri, 18 Feb 10:00 Fri, 18 Feb 10:00 Fri, 18 Feb 10:00

Sat, 18 Feb 10:00 Sun, 18 Feb 10:00 Sun, 18 Feb 10:00 Sun, 18 Feb 10:00

Mon, 18 Feb 10:00

from the actual recording information, it may not match the recording time on the USB HDD.

To check a schedule

a Press B or b on the Programme Timers screen to

check the schedule.

To edit a schedule

a Press B or b on the Programme Timers screen to

select the title whose schedule you want to edit and press OK.

The Edit Timer screen will appear. Change the settings as required, following the same procedure as for setting the schedule.

b Press B or b to highlight Set Timer and press OK.

To delete a schedule

a Press B or b on the Library screen to select the title

whose schedule you want to delete.

b Press the RED button.

Press C or c in the displayed confirmation window to select Yes and press OK. The selected schedule will be deleted.

NOTE: You can also delete a schedule by selecting Delete Timer from the Edit Timer menu for each programming

method.

To view a recorded programme

To view the recorded Library screen and select a title from the

recorded programme list.

a Press MENU / C c / B / C c to highlight

TV Programmes / Library icons and press OK. Library screen will appear.

CONTROLS AND FEATURES

b Press B or b to select the title you want to view.

A preview of the content selected can be seen on the preview screen.

To change the order in which the titles are liste d, press the BLUE button.

c Press OK.

Viewing starts.

● icon appears next to the title currently being recorded. When the title currently being recorded is selected and OK is pressed, playback will start from the beginning of the programme currently being recorded.

Operations during viewing

The following operations can be performed using the remote control buttons.

c To PLAY cc To FAST FORWARD v To STOP z To SKIP-FORWARD W/w To PAUSE/STEP C c To shift playback

position

Z To SKIP-BACK CC To REWIND

Operations from the Library screen

As well as viewing the list of recorded titles on the Library screen,

you can protect or delete titles and register titles to Personal

To display the Library screen

Mode.

a Press MENU / C c / B / C c to highlight

TV Programmes / Library icons and press OK. The Library screen will appear.

Library

All

Sun Mon Tue Thu Fri SatWed

Sort : New

WWWWW

WWWWWW

WWWWWWWWWWWW WWWWWWW WWWWWWW

WWWWWWW WWWWWWW

WWWWWWW

WWWWWWW WWWWWWW WWWWWWW WWWWWWW WWWWWWW

Wed, 16 Feb 10:00 Wed, 16 Feb 10:00

Thu, 17 Feb 10:00 Thu, 17 Feb 10:00

Fri, 18 Feb 10:00 Fri, 18 Feb 10:00 Fri, 18 Feb 10:00

Sat, 18 Feb 10:00 Sun, 18 Feb 10:00 Sun, 18 Feb 10:00 Sun, 18 Feb 10:00 Mon, 18 Feb 10:00

1235 ITV London

ASTRA 19.2°E

10 July 2011 14:30(01:30) USB HDD3 Remaining Capacity: 86% (912.0GB)

English

14:15 Wed, 16 Feb

CONTROLS AND FEATURES

Sort : New

WWWWWW WWWWWWWWWWWW

WWWWW

WWWWWWW WWWWWWW WWWWWWW WWWWWWW WWWWWWW WWWWWWW

Library

All

We We

Th Th

F F F

1235 ITV London

ASTRA 19.2°E

USB HDD3 Remaining Capacity: 86% (912.0GB)

10 July 2011 14:30(01:30)

Thu, 17 Feb 10:00

Fri, 18 Feb 10:00 Fri, 18 Feb 10:00 Fri, 18 Feb 10:00

Sat, 18 Feb 10:00 Sun, 18 Feb 10:00 Sun, 18 Feb 10:00 Sun, 18 Feb 10:00

Mon, 18 Feb 10:00

REGZA-LINK Setup

Panel Lock

Off

Auto

Network Setup

Teletext

Guide Type Network Device Setup

Off

Network Lock

Recording Setup

Preferences

To protect or unprotect a recorded programme

English

Protecting a programme prevents it from being accidentally deleted.

Select the title of the programme you want to protect and press the GREEN button. icon appears next to the title and the programme is protected.

If Protect is set to On when the programme is recorded,

icon appears next to the title of the recorded programme.

When a title with icon is selected and the GREEN button is pressed, icon disappears and the programme is unprotected.

To delete a recorded programme

a Press the RED button. Check boxes will appear next to

the titles.

b Press B or b to select the title you want to delete and

press OK. A check mark will be inserted in the check box.

USB HDD capacity

You can check the remaining capacity of the USB HDD using

Remaining Capacity.

NOTE: The remaining capacity displayed is only a guide; it is

not guaranteed.

Recording Setup

You can set your preferences for recording.

To select USB HDD and Partition for Recording

a Press MENU / C c to highlight Setup icon.

b Press B / C c to highlight Preferences icon and press

OK.

c Press B or b to select Recording Setup and press OK.

To insert a check mark against all the titles, press the YELLOW button.

To uncheck all the check boxes, press the BLUE button.

NOTE:

• A check mark will not be inserted against protected titles.

• Note that once deleted, a title cannot be restored.

c Press the RED button.

Select Yes in the confirmation window and press OK. All the titles with check marks will be deleted.

d Press B or b to select Select Device and press OK.

USB HDD and Partition list will be appear. If USB HDD is partitioned by PC, several partitions will be displayed.

e Select USB HDD and Partition you want to recording.

To set the recording time for One Touch Recording

a Press MENU / C c to highlight Setup icon.

b Press B / C c to highlight Preferences icon and press

OK.

c Press B or b to select Recording Setup and press OK.

d Press B or b to select One Touch Recording Time.

Recording Setup

TimeShift Size Start Padding Time None End Padding Time None Device Test Format Device

512 MB

Programme End Time

Select Device One Touch Recording Time

e Press C or c to select the recording time.

You can set the Programme End Time in 30-minute increments in the range of 30 minutes to 360 minutes.

To select the TimeShift Size

a In the Recording Setup screen, press B or b to select

TimeSift Size.

b Press C or c to select 512MB, 1GB, 2GB or 4GB and

press OK.

To use TimeShift recording

Time Shift recording allows you to pause live TV for a fixed

period of time.

For Example: If you move away from the TV for a short period, such as when the phone rings while you are watching TV, you can easily pause live TV and then continue to view from the same point in the programme when you return.

a Press W/w on the remote control while viewing the

DTV programme. The screen will switch to a still image and recording will start automatically. The recording time is decided by TimeShift Size. If the TimeShift file size reaches the limit set, then the TV will continue to be paused, but the recording buffer will be reset to the beginning.

CONTROLS AND FEATURES

To set the padding time for programmed recording start time and end time

a In the Recording Setup screen, press B or b to select

Start Padding Time.

b Press C or c to select a time.

You can select from None, 3 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, and 45 minutes.

Recording will start at the selected number of minutes prior to the recording start time.

c Press B or b to select End Padding Time.

d Press C or c to select a time.

You can select from None, 3 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, and 45 minutes.

Recording will end at the recording end time plus the selected number of minutes.

To perform a USB HDD operation test

a In the Recording Setup screen, press B or b to select

Device Test and press OK.

USB HDD operation test will start. Wait until the test ends.

NOTE: The results of the device test are only a guide. The device may not function as shown in the results.

English

b Press c (play).

Catch-up viewing will start from where the programme was paused.

c Press v (stop) to stop the recording.

CONTROLS AND FEATURES

To format a USB HDD

English

a In the Recording Setup screen, press B or b to select

Format Device and press OK.

b Press C or c to select Yes in the confirmation window

that will appear and press OK. Formatting will start. Wait until formatting ends.

NOTE:

• If the USB HDD is separated several partitions by PC and

multiple Partition appear on the Device List screen, press B or b to select the Partition you want to format.

• When the USB HDD (or Partition) is formatted, all the data stored on the USB HDD (or Partition) will be deleted.

Scheduling priority

If scheduled time slots are next to each other and there is more than one minute between the end time of the first schedule and the start time of the next schedule, programmed recording will be performed correctly.

• When Start Padding Time and End Padding Time are set (see page 45), the start time and end time will be the time plus the additional minutes.

If scheduling times overlap, priority will be given to the programmed recording which starts first. When the programmed recording that started first ends, recording will switch to the next scheduled programme. At this time, depending on how far the scheduling times overlap, the beginning section of the next scheduled programme may not be recorded.

• When End Padding Time is set for the first programmed recording (see page 45), depending on how far the scheduling times overlap, the End Padding Time may be ignored and recording of the next scheduled programme may start. As priority is given to the time set in the Set Timer menu over the Padding Time, recording will automatically be triggered when the next scheduled programme start time is reached during End Padding Time.

CONTROLS AND FEATURES

English

Using Toshiba Places

A new cloud based service, where content (movies, photos, etc.) can be viewed and shared across the web through a simple user interface called “Toshiba Places”.

NOTE: You need to configure a home network before using this feature (see page 13).

a Press on the remote control, or press MENU / C c

to highlight Connected TV icon and press B / C c to highlight Toshiba Places icon and press OK.

b Press BbC c to select the desired place and press

OK.

NOTE:

• Some features require an always-on broadband internet connection, firmware update and/or additional bandwidth dedicated to this product. Third party interne t services may change or be discontinued or restricted at any time. Toshiba makes no warranties, representations, or assurances about the content, availability or functionality of third-party content or services. Use of third party internet services may require registration by a computer and/or payment of charges and membership. Not all services or content may be available on this product, in your country or with your language. In order to experience the full capabilities of this product, fully compatible devices may be required. For more information, visit http://www.toshibaplaces.com/about

• This service may be forcibly blocked according to the situation of CSP service.

Using Hybrid TV Standard (if available)

Hybrid TV Standard enables the TV to receive HbbTV services. TV services which support this feature often show “press RED” on the screen.

NOTE: You need to configure a home network before using this feature (see page 13).

a Press MENU / Cc to highlight Setup icon.

b Press B / C c to highlight Preferences icon and

press OK.

c Press b to select Hybrid TV Standard.

d Press C or c to change from Disabled to Enabled.

When changing from Disabled to Enabled, a Network Connection Test is performed. If the result

is OK, then the setting changes to Enabled. If not, the setting remains Disabled.

When “press RED” is indicated on the screen, press the RED button to access HbbTV service site, and then press

BbC c to select the desired contents.

NOTE:

• This service is not available outside Germany.

• The HbbTV service indication or required key operations may not be possible depending on the service contents. In this case set the Hybrid TV Standard setting to Disabled.

• Toshiba makes no warranties, representations, or assurances about the content.

CONTROLS AND FEATURES

Using Intel® Wireless Display

English

Intel® Wireless Display (Intel® WiDi) is supported on this TV. You can use your TV as second display for Intel® Wireless Display ready computers.

NOTE: In order to use this feature, the TOSHIBA Dual Band WLAN Adaptor WLM-20U2 (not supplied) is required (see page 13).

a Press MENU / C c to highlight Function icon.

b Press B / C c to highlight Intel® Wireless Display

icon and press OK.

A prompt will appear on the TV screen. Select Yes.

c Launch the Intel® WiDi software on your PC/Control

device and select “scan for available adaptors”.

Intel® WiDi device name and ID list will then be displayed on the PC/Control device screen.

Select the TV which you wish to connect to.

“Connecting” will be shown on the TV.

d Connecting your PC to your TV the first time:

When selecting the Toshiba TV for the first time, a 4digit code will appear on your TV screen. This code needs to be inputted into your computer to authenticate the connection.

If authentication has already taken place:

”Connected to Intel® Wireless Display. Please Wait” will appear on screen.

e After the Intel® WiDi connection is complete, the TV

screen will mirror the content shown on the PC screen.

NOTE:

• When connecting Intel® WiDi, PC must have power turned on.

• When the Intel® WiDi software is active, other TV network connections are not available.

• When the Intel® WiDi software is active, other applications may not be usable.

• Int el® WiDi d evice nam e of the T V can be ch anged fro m the Intel® WiDi software.

To exit Intel® Wireless Display

Exit Intel® Wireless Display by pushing the disconnect button on Intel® WiDi software or by pressing EXIT on the TV remote control.

NOTE: If the PC has been inactive for some time, the Intel® WiDi connection will be disconnected automatically.

Intel® Wireless Display Device Name

The TV's device name can be changed.

a In the Preferences menu, press B or b to select

Setup and press OK.

b Press B or b to highlight Intel® Wireless Display

Setup and press OK.

c Highlight the Intel® Wireless Display Name and

press OK. The Software Keyboard window will appear.

d Input the Device Name by using the software

keyboard (see page 38). Press the BLUE button.

e Highlight Done and press OK to save your setting.

PC List

PC List displays a list of MA C addresses for previously connected

PC/Control devices that have been connected before. The

maximum number that can be stored is 20.

If the list run out of space, the least-recently-used MAC address will be deleted and the new MAC address added automatically.

a In the Intel® Wireless Display Setup screen,

highlight the PC List and press OK. PC List will appear.

The registered PC/Control devices can be deleted one by one by pressing RED key in the List.

When doing so the following text can be seen “Do you want to unregister this PC? Yes/No” (default cursor is “No”).

CONTROLS AND FEATURES

English

Using the Media Player

This TV allows you to enjoy movie, music and photo files stored on a USB device connected to the USB port. Moreover, you can also play photos, movies or music files from your PC by connecting the TV to your home network.

Terminology:

DMP: DLNA CERTIFIED™ Player

DMS: DLNA CERTIFIED™ Server

• DMP: The TV can control and play content from a DMS.

- A DMS is a device that can function as a server for DMP.

NOTE:

• Do not insert/remove USB device while in use.

• MENU is not available during playback.

Media Player Specifications

Device

USB device

Interface version: USB2.0 HS

USB Mass Storage Class devices (MSC)

NOTE:

• Connectivity is not guaranteed for all devices.

• Incorrect behaviour may occur with a USB hub connection.

File system: FAT16 and FAT32

Maximum memory size: Unlimited

DLNA CERTIFIED™ Server: Your PC (for example)

You must obtain any required permission from copyright owners to download or use copyrighted content. TOSHIBA cannot and does not grant such permission.

Basic operation

Using Media Player with USB

When Auto Start is enabled, you will be asked if you want to start the Media Player whenever a USB device is inserted. If Auto Start is disabled (or if you want to connect to a DMS on the network), you must manually start the Media Player from the menu.

To change the Auto Start setting:

a Press MENU / Cc to highlight Media Player icon.

b Press B / Cc to highlight USB Media Player and

press OK.

c Press B or b to select Media Player setup and press

OK.

d Press B or b to select USB Auto Start and press C or

c to select On or Off.

Auto Start:

a Insert USB device into the USB socket on the left side

of the TV. A prompt will appear.

b Press C or c to select Yes and press OK.

c Press B or b to select Photo, Movie, or Music and

press OK.

d Select the connected USB device and press OK.

Multi View will appear.

NOTE: If Auto Start is set to Off, you can start the Media

Player manually.

Manual Start:

a Insert USB device into the USB socket on the left side

of the TV.

b Press MENU / Cc to highlight Media Player icon.

c Press B / Cc to highlight USB Media Player and

press OK.

d Press B or b to select Photo, Movie or Music and

press OK.

e Select the connected USB device and press OK.

Multi View will appear.

To select a file in the Multi View:

a Press Bb C c to select a file or folder.

b Press OK to move to the next layer, or press BACK to

return to the previous layer.

NOTE: You can also return to the previous layer by selecting the icon at the top left of the Multi View screen and pressing OK.

To close the Media Player:

a Press EXIT.

CONTROLS AND FEATURES

Multi View (DMS)

///Folder name

5/9999

Return

xxxxxxxxx.mp3xxxxxxxxx

xxxxxxxxx.mp3xxxxxxxxx.mp3

Network Media Player

xxxxxxxxx.jpg

xxxxxxxxx.mpgxxxxxxxxx.mpgxxxxxxxxx.mpg

Using the Media Player with a DLNA CERTIFIED™

English

Server

You need to configure a home network before using this feature (see page 13).

a Press MENU / Cc to highlight Media Player icon.

b Press B / Cc to highlight Network Media Player

and press OK.

c Select the server you want to use and press OK.

Multi View will appear.

Photo, Movie and Music files and folders are displayed in the Multi View (DMS). Files are displayed according to the type first selected (Ph oto, Movie or Music). e.g. If you first selected a Photo file, only Photo files will be displayed.

To select a file in the Multi View:

a Press Bb C c to select a file or folder.

b Press OK to move to the next layer, or press BACK to

return to the previous layer.

NOTE: You can also return to the previous layer by selecting the icon at the top left of the Multi View screen and pressing OK.

To close the Media Player:

a Press EXIT.

Viewing photo files (on a DLNA

CERTIFIED™ Server or USB device)

There are three types of viewing modes.

Multi View (USB Photo)

This view allows you to search for photos in a grid format. The pictures are displayed using thumbnail data in each image file.

Broken photo contents

/Folder/select Folder or File

Return

xxxxxxxxx.jpg

The initial highlighted position will be on the top left thumbnail in the Multi View.

5/9999

xxxxxxxxx.jpg

a Press B b C c to move the highlight in one window.

If all of the photos will not fit in one screen, when pressing

C at the top left thumbnail, the screen will

move to the previous page. Conversely, when pressing

c at the bottom right thumbnail, the screen

will move to the next page.

U Pu buttons can be used to page up/down the

Multi View when there are more photos than will fit onto one screen. When the P

U Pu buttons are

pressed, the highlight shall be on the photo at the top left of Previous/Next Multi View.

NOTE:

• The page down function on the last page and page up function on the first page are not available.

• The remote control CT-90420 does not have /

// buttons.

b When you select a folder, press OK to move to the

next layer. Press BACK to move back to the previous layer.

c Press OK to view the selected photo in Single View

mode.

Single View

In this mode, only files loca ted in the selected directory will be displayed. This view allows you to change the photo content manually. When moving from Multi View to Single View, the currently selected photo will be displayed.

a Press c to view the next photo. Press C to view the

previous photo.

b Press B to rotate the image 90° clockwise. Press b to

rotate the image 90° counterclockwise.

c Press to display file status information (file

number, photo title, resolution etc.).

NOTE: The information may not be correctly displayed depending on the contents or DMS.

Slide Show

This view allows you to watch a slide show of your photos. In this mode, only files located in the selected directory will be played.

a To start slide show, press OK in the Single View mode. b Press C or c to view the previous/next photo. c Press to display file status information.

NOTE: Pressing stop the slideshow and rotate the photo.

To set Interval Time and Repeat settings:

B or b while in the Slide Show mode will

a Press QUICK to open the Quick Menu. b Press B or b to sel ect ei the r Interval Time or Repeat. c Press C or c to adjust the setting and press OK.

NOTE: When in the DMS and Multi View modes, this feature cannot be used.

To set Background Music (USB only)

a Press QUICK to open the Quick Menu while in the

Slide Show mode.

b Press B or b to select Background Music and press

C or c to select On.

The music file in the same folder as the displayed photo will start playing.

NOTE:

• When the music file repeat mode is set to All (see page 55), all the music files in the same folder as the photo will be played repeatedly.

• To stop music file playback, select Off in Background Music.

CONTROLS AND FEATURES

To zoom in/out photos

During the Single View mode or Slide Show mode, the zoom function can be used.

RED button (Zoom in)

S x2 S x4 S x8 zoom

USB: x1 DMP: x1/8

GREEN button (Zoom out)

USB: x8 DMP: x8

BACK button: Normal playback

B b C c buttons: Vertical or Horizontal scrolling

NOTE: Using the zoom function while in the Slide Show mode will stop the slideshow and zoom in/out the photo.

S x1/4 S x1/2 S x1 S x2 S x4 S x8 zoom

S x4 S x2 S x1 zoom

S x4 S x2 S x1 S x1/2 S x1/4 S x1/8 zoom

English

CONTROLS AND FEATURES

To select a photo from Play List

English

While in the Single View mode or Slide Show mode, you can select a different photo from the Play List.

a Press QUICK to open the Quick Menu from Single

View mode or Slide Show mode.

b Press B or b to select Play List and press OK.

The Photo List will appear.

c Press B or b to select a file name.

To close the Photo Viewer

a Press EXIT. The television will return to the last viewed

channel or external input.

File Compatibility

See page 79.

Viewing movie files (on a DLNA

CERTIFIED™ Server or USB device)

You can select movies from a Multi View of available files.

Multi View (USB Movie)

///Folder name

xxxxxxxxx.mpg

Return

xxxxxxxxx

xxxxxxxxx.mpg

5/9999

xxxxxxxxx.mpg

a Press B b C c to select a file or folder. PU Pu

buttons can be used to page up/down the Multi View when there are more files than will fit onto one screen.

NOTE: The page down function on the last page and page up function on the first page are not available.

b When you select a folder, press OK to move to the

next layer. Press BACK to move back to the previous layer.

c With the desired file selected, press OK or

start playback.

NOTE:

• On preview screen, if you highlight the file without pressing OK, the content is played on a preview screen. When OK is pressed, it is played in ful l screen mode.

• Depending on the file size, it may take some time to start playback.

(play) to

d Press v to stop playback.

NOTE:

• If playback finishes before return to the Multi View.

• Depending on the file size, it may take some time for playback to begin.

v is pressed, the screen will

During playback:

• Press W/w to pause.

PAUSE may not be available depending on the contents or DMS.

• To resume normal playback, press

• To play in fast reverse or fast forward directions, press or

cc during playback. Each time you press the CC or cc,

the playback speed will change.

• To locate a specific file, press

• Press to display the file status information (content number, movie title, progress time etc.).

NOTE:

• The information may not be correctly displayed

depending on the contents or DMS.

•During playback, you can adjust the PICTURE and

SOUND menu functions from the Quick Menu.

• The playback speed (

depending on the stream.

CC / cc) may not change

(play).

Z or z repeatedly.

To select subtitle and audio languages (USB only)

• Press SUBTITLE repeatedly to select your preferred subtitle language.

s repeatedly to select your preferred audio

• Press language.

NOTE: This feture is not available depending on the contents.

To set the repeat mode

a Press QUICK to open the Quick Menu.

CONTROLS AND FEATURES

Resume Play (USB only)

You can resume playback from where it was last stopped.

Press

v while playing the movie to memorize the stopped

position. On the Multi View screen, if you select a movie whose stopped position has been memorized, the message “Resume Play?” will appear. Select Yes to resume playback from the last stopped position.

NOTE: If you play different content or exit Media Player, the memorized stopped position will be deleted.

To select a movie from Play List

While playing a movie, you can select a different movie from the Play List.

a Press QUICK to open the Quick Menu.

b Press B or b to select Play List and press OK.

The Movie List will appear.

c Press B or b to select a file name.

To close the Movie Viewer

a Press EXIT.

File Compatibility

See page 79.

English

b Press C or c to select Off, All or 1.

Mode Description Off The file is played back only once. All Files in the same folder are repeatedly played

1 The same file is repeatedly played back.

back.

c Press BACK.

NOTE: When in the DMS and Multi View modes, this feature

cannot be used.

CONTROLS AND FEATURES

DivX® VOD Registration DivX

VOD Deregistration

DivX® VOD

To register your TV to a DivX® account

English

This TV allows you to play back files purchased or rented from DivX® Video-On Demand (VOD) services. When you purchase or rent DivX® VOD files on the internet, you will be asked to enter a registration code.

a In the Media Player Setup menu, press B or b to

display DivX® VOD and press OK.

b Press B or b to highlight DivX® VOD Registration

and press OK.

c The DivX® VOD window will appear and you will see

the registration code. For details on registration, please visit the DivX® website at

http://vod.divx.com

d Copy the activation file to a memory device and play

it on the TV.

To deregistration your device

a In step 2 above, highlight DivX® VOD

Deregistration, and then press OK.

b A confirmation message will appear. Select Yes and

press OK.

c The DivX® VOD window will appear and you will see

the deregistration code. For details on registration, please visit the DivX® website at

http://vod.divx.com

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com more information and software tools to convert your files into DivX videos.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-onDemand (VOD) movies. To obtain your registration code, loc ate t he Di vX VO D sec tion i n you r dev ice s etup menu. Go to vod.divx.com registration.

DivX Certified® to play DivX® video up to HD 1080p, including premium content.

for more information on how to complete your

To playback DivX Plus HD content:

• To play in fast reverse or fast forward directions, press CC

cc during playback. Each time you press the CC or cc,

or the playback speed will change.

• This TV generates original chapter point in 10% increments for 10 chapters in total, that are accessible by using the Number buttons on the remote control.

During playback, press chapter. When two times of above. If playback will skip to the beginning of the next content.

Z to skip to the beginning of the current chapter.

Press

Z is pressed twice in succession, it will skip to the

When beginning of the previous chapter. If succession at the first chapter, stop playing the current content and skip to the beginning of the previous content.

The Number button is used for direct jump. If the 3 button is pressed, playback will jump to the beginning of 3rd chapter. Even if the playback content has authored chapters, the Number button is used to jump directly to Auto Generated Chapter.

If the content has Authored Chapters, Authored Chapters.

NOTE:

• Depending on the content data will not be operated.

• The playback speed ( on the stream.

z to skip to the beginning of the next

z is pressed twice in succession, it will repeat

z is pressed at the last chapter,

Z is pressed twice in

Z / z are using for

CC / cc) may not change depending

Using Multi Title and Alternative Timelines Multi Title

DivX Plus HD files may contain up to 100 titles.

You can change the title (It contains same video file) by pressing the RED button.

When the RED button is pressed, it will display the title change window at the bottom on the screen (same as Subtitle or Audio change window).

The title is changed cyclically each time the RED button is pressed. Playback will start from start time of selected title

B or b.

every

for

NOTE: Depending on the content data will not be operated.

Playing music files (on a DLNA

CERTIFIED™ Server or USB device)

You can listen to music from a Multi View of available files.

Multi View (USB Music)

/Folder/select Folder or File

Return

xxxxxxxxx.mp3

xxxxxxxxx

xxxxxxxxx.mp3

5/9999

xxxxxxxxx.mp3

a Press B b C c to select a file or folder. PU Pu

buttons can be used to page up/down the Multi View when there are more files than will fit onto one screen.

NOTE: The page down function on the last page and page up function on the first page are not available.

b When you select a folder, press OK to move to the

next layer. Press BACK to move back to the previous layer.

c With the desired file selected, press OK or

start playback.

NOTE: If you highlight the file without pressing OK, the content is played on a Multi View. When OK is pressed, it is played in full screen mode.

(play) to

d Press v to stop playback.

NOTE:

• Depending on the file size, it may take some time for playback to begin.

• During playback, you can adjust the SOUND menu functions from the Quick Menu.

During playback:

• Press W/w to pause.

• To resume normal playback, press PAUSE may not be available depending on the contents or

DMS.

• To play in fast reverse or fast forward directions, press

cc. Each time you press CC or cc, the playback speed

or will change.

(play).

CONTROLS AND FEATURES

To set the repeat mode:

a Press QUICK to open the Quick Menu.

b Press B or b to select Repeat.

c Press C or c to select Off, All or 1.

Mode Description Off Files in the same folder are played back once. All Files in the same folder are repeatedly played

1 The same file is repeatedly played back.

back.

d Press BACK.

NOTE: When in the DMS and Multi View modes, this feature

cannot be used.

To select a music file from Play List

While playing a music file, you can select a different music file from the Play List.

a Press QUICK to open the Quick Menu.

b Press B or b to select Play List and press OK.

The Music List will appear.

c Press B or b to select a file name

To display the file status information

a Press during playback. The information will be

displayed on the bottom of the screen.

b Press again to remove the information.

NOTE: The information may not be correctly displayed depending on the contents or DMS.

To close the Music Player:

a Press EXIT.

File Compatibility

See page 79.

English

CONTROLS AND FEATURES

REGZA-LINK Setup

Panel Lock

Off

Auto

Network Setup

Teletext

Guide Type Network Device Setup

Off

Network Lock

Recording Setup

Preferences

Edit Timer

10:50 Tue, 26 Apr

Repeat

Date Start Time

Channel

Once

Timer Type

Recording

Set Timer Delete Timer

30 CABC Channel

10:51

Tue, 26 Apr 2011

Other features

English

Panel Lock

Panel Lock disables the buttons on the television. All buttons on

the remote control can still be used.

a Press MENU / Cc to highlight Setup icon.

b Press B / C c to highlight Preferences icon and

press OK.

c Press B or b to select Panel Lock. d Press C or c to select On.

When Panel Lock is On, a reminder will appear when the buttons on the television are pressed. If th e standby button

is pressed, the television will switch off and can only be brought out of standby by using the remote control.

The timers

Programme Timers – digital only

This feature will set the television to go to a specific channel at a certain time. It can be used to view a particular programme, or by

setting the mode to daily or weekly, can be used to view a series

a Press MENU / Cc to highlight TV Programmes icon. b Press B / C c to highlight Programme Timers icon

and press OK.

c Press b if necessary to select an open timer position,

then press OK. The Edit Timer menu will now appear on screen.

d Press B and b to go through the list adding the

details of the programme by using the number buttons and

e When all of the details have been entered, highlight

Set Timer and press OK to save the timer.

The ORANGE programme timer indicator on the front of the television will be lit (see page 74 for details).

of programmes.

C and c to make selections.

On Timer

Enable On Timer Enable DTV Clock

Volume

Time Until Power On

00:00

Done

Channel

12 ABC

Repeat

Once

Input

DTV

Power On Time

00:00

On On

The feature allows you to set the television to turn on

automatically to a preset channel at a certain time of day or after

a certain length of time.

a Press MENU / Cc to highlight Function icon.

b Press B / C c to highlight On Timer icon and press

OK.

c Press B or b to select Enable On Timer and press C

c to select On.

CONTROLS AND FEATURES

To cancel the On Timer

a In the On Timer menu, select Enable On Timer.

b Press C or c to select Off.

c Press B or b to highlight Done and press OK.

Sleep Timer

The television can be set to turn itself Off after a certain length of

time.

a Press MENU / Cc to highlight Function icon.

b Press B / C c to highlight Sleep Timer icon and

press OK.

c Use the number buttons to set the desired time. For

example, to switch the television off in one and a half hours enter 01:30, or press in steps of 10 minutes. (Maximum time setting is 12 hours)

c / C to increase/decrease

English

d Press b to select Enable DTV Clock, and then press C

c to select On or Off.

e Press B or b to go through the list adding the details

of the On Timer by using the number buttons and and

c to make selections.

Power On Time (only for DTV Clock On mode): Set the time you prefer with the number buttons. Repeat (only for DTV Clock On mode): Select the desired On Timer operation (Once, Every Day, Mon-

Fri, Mon-Sat, Sat-Sun). Input: Select a video input source (ATV, DTV Ant, EXT

1, EXT 2, HDMI 1, HDMI 2, HDMI 3 or PC). Channel: Set the channel that will be tune d when the television turns on.

NOTE: When an external input is selected in the Input field, a channel cannot be selected.

Volume: Set the volume that will be applied when the television turns on. Time until Power On (only for DTV Clock Off mode): Set the amount of time from now until the TV turns o n using the number buttons (maximum of 12 hours).

f Press B or b to highlight Done and press OK.

d Press EXIT to finish.

e To cancel the Sleep Timer, enter all zeros for the

above setting.

CONTROLS AND FEATURES

Change

6:00 Thu, 11 Oct

CHANNEL Z

Now

MLB Young’s two-run triple leads AL over NL

15 min left

News

8:00- 9:00

6:00- 8:00

Also

AD 18

16:9

AD English

World News and Sports

Edit Timer

The Daily Politics

10:50 Tue, 26 Apr

Timer Type

2 CABC Channel

11:30

12:30 Tue, 26 Apr

Reminder

Set Timer Delete Timer

Energy Saving Settings

English

Automatic Power Down

The TV will automatically turn itself off (standby) after 4 hours, if

you do not operate the TV either from the remote control or the

TV control panel.

a Press MENU / Cc to highlight Setup icon.

b Press B / Cc to highlight Preference icon and press

OK.

c Press B or b to select Energy Saving Settings and

press OK.

d Press B or b to select Automatic Power Down.

e Press C or c to select On or Off.

NOTE:

• This feature is set to On when Location is set to Home.

•1 minute before switching to standby, a Warning message will appear.

• When the following features are set, the feature that is set for the nearest time will function.

- Automatic Power Down

-Sleep Timer

- Auto shutdown after 1 hour of inactivity (after power on

by On Timer)

- No signal auto power off (after 15 minute of no signal)

Digital on-screen information

When viewing in digital mode, the on-screen information and programme guide provide access to programme details for all available channels.

Information

a Press , the information screen will appear giving

details of the channel and programme currently being viewed.

Display Example

b Press B or b to select the “Now”, “Next” or “Also”

information guide.

The selected information content will appear.

c To record the next scheduled programme, select

Next and press OK. The Edit Timer screen will appear.

No Signal Power Down

The TV will automatically turn itself off after 15 minutes when no

signal is detected. You can change the setting to Off for the

• Low signal strength of analog channel (no signal detection)

• Only Audio L/R is connected to external input to listen to music through the TV speakers.

following purposes:

a In the Energy Saving Settings menu, press B or b to

select No Signal Power Down and press OK.

b Press B or b to select the item you want to change

and press

C or c to select On or Off.

NOTE:

• Default setting is all On.

• A warning message will appear 1 minute before turning off.

d The details of the programme will already have been

added to the timer. Highlight Set Timer and press OK to save.

To indicate that a Recording Timer has been set, a clock icon will be displayed in the Next fields of the information screen. A check mark will appear if the timer is a Reminder Timer.

To display More Information

1 AAA ONE

3 AAA THREE

5 AAAi

9 DDD HD

4 AAA NEWS 24

6 CAAA Channel 7 BBB HD 8 CCC HD

2 AAA TWO

Thu 26

11:30 12:00 12:30

13:00

11:52 Tue, 26 Apr

13:30 14:00

Mind You...45Bargain Hunt

Cl... Class... Xchange

AAAi

AAA News

This is AAA THREE

AAAi

This is AAA THREE

School... The Daily Politics Working lun... Scho...

AAA News AAA News AAA News

Houses Behaving Ba... AAA News

La...50Schoo...

S...

Cl...40Class...55Cla...20Class...40Cla...20Class...

City Hospital

a Press QUICK to open the Quick Menu.

CONTROLS AND FEATURES

English

Using EPG (Electronic Programme Guide)

b Press b to highlight More Information and press OK.

On-screen Information icons

Service info Service type

Audio info Mono

Audio/Subtitle

info

Recording info ●REC Recording + Service

Event info HD, SD Video format (HD, SD)

Timer info Recording

Icon Description

(TV, Radio, Text)

Skip

Stereo

Dual mono

Multichannel

Dolby Digital

Dolby Digital+

When HE-AAC is

decoded

AD Audio Description

For Hard of Hearing

info

16:9, 4:3 Video Aspect

Teletext

Subtitle (Single, Multi)

Audio track

(Mono, Multi)

0, 4 – 18 Parental rating

Encrypted

Reminder

You can choose the desired EPG system between the Broadcast Guide or MediaGuide that needs a internet connection.

Using Broadcast Guide

Make sure you selected Broadcast Guide in the Guide Type

menu of Initial Setup (see page 18.) This setup can also be done

from the Setup / System Setup / Quick Setup menu or Setup

/ Preferences / Guide Type menu any time.

a Select the on-screen Guide by pressing GUIDE, and

the Guide screen will appear highlighting details of the channel and programme currently being viewed. This may take a few moments to appear.

You can switch the time scale to 1.5 or 3 hours by pressing the GREEN button.

b Press C or c for information on other programmes

scheduled for the channel selected. To highlight the first programme in the genre grid, press the RED button.

c For details of other programmes currently available,

press

B and b to scroll up and down the channel list.

As channels are selected, details of the programme currently being broadcast will appear. Press

C or c to

view information for future programmes.

d For information on a highlighted programme, press

e To set the timer for that programme, press the BLUE

button to bring up the Programme Timers menu.

f Press Pu to advance to the next page, or press PU to

go back to the previous page.

CONTROLS AND FEATURES

Genre Colour

Movies

Colour Setup

:▲ :▼ :◄ :►

wwwwwww

6:15-7:00pm wwwwwwwwwwwwwwwwwwwwwwww wwwwwwwwwwwwwwwwww

Terms And Conditions

Primary Navigation

Terms And Conditions

ABCDE FGHI J KLMNO PQRST UVWXY Z .?123 ÀÊÖ

Space ClearBack

Recent Searches

Search For: ►

4:01pm

1 2

English

Genre selection/searching

From the Guide screen, you can use the genre selection and

search features.

a In the Guide screen, press QUICK. b Press B or b to highlight Genre Colour in the Quick

Menu and press OK.

c With the focus on a particular genre, press the desired

coloured button to assign. Four colours will be available to set. Press BACK to go back to the Guide screen.

Using MediaGuide

MediaGuide is a service of Rovi Corporation. This service is an integrative media guide through the Internet besides television contents and internet contents.

NOTE:

• You need to configure a home network before using this feature (see page 13).

• Make sure you selected MediaGuide in the Guide Type menu of Initial Setup (see page 18.) This setup can also be done from the Setup / System Setup / Quick Setup menu any time.

This will tune to live TV for the particular show.

If the show is not being aired, you will be directed to the Overview screen with upcoming show times.

Primary Navigation menu

a In the Secondary Navigation menu, press C to expand

the Primary Navigation menu.

Hotlist

Press B or b to select Hotlist and press OK. Shows will be listed. Selecting a movie or show will bring you to the overview page.

Press B or b to select Search and press OK.

Terms And Conditions

Press B or b to select Terms And Conditions.

The License Terms And Conditions will be displayed.

Search screen

MediaGuide screen

a Press GUIDE on the remote control, or select Guide in

the TV Programmes menu and press OK.

The Listings menu in the Secondary Navigation will be selected. Default focus position is the current channel.

Remote control key operation

cRecent Searches button. Pressing OK will take you to the

Recent Searches screen.

dSearch input area displays what you are typing.

Pressing Search For will conduct the search and take you to Search Results.

eSearch keyboard.

NOTE:

• Toshiba does not take responsibility for the accuracy of content displayed.

• Service Information may not be displayed or there may be little service information displayed depending on the area or the kind of broadcast.

• The MediaGuide can only be used when your TV is connected to the internet.

• Starting and operation of this service may take time.

• Software update may be needed in order to use this service.

• This service does not support all languages.

• MediaGuide is a service of Rovi Corporation.

• During use of the MediaGuide usage information will be notified to the Rovi server to ensure continued efficient operation of the guide.

• Rovi Corporation and/or its subsidiaries and related

System Setup

Menu Language

English

Country Ant/Cable In

ATV Manual Tuning DTV Manual Tuning

Quick Setup

DTV Settings

Auto Tuning

Germany

* * * *

New PIN:

Confirm PIN:

PIN Setting

affiliates are not in any way liable for the accuracy or availability of the program schedule information or other data in the Rovi Guide system and cannot guarantee service availability in your area. In no event shall Rovi Corporation and/or its related affiliates be liable for any damages in connection with the accuracy or availab ility of the program schedule information or other data in the Rovi Guide system.

• Third party internet services are not provided by Toshiba, may change or be discontinued at any time and may be subject to internet service provider restrictions. Toshiba makes no warranties, representations, or assurances about the content, availability or functionality of third-party content or services. Use of third party internet services may require the creation of a separate account through a computer with internet access and/or payment of one-time and/or recurring charges and membership. Not all third party services may be available on or compatible with this product. In order to experience the full suggested capabilities of this product, fully-compatible devices may be required.

CONTROLS AND FEATURES

Digital settings – parental control

In order to prevent viewing of unsuitable films and programmes, channels and menus can be locked in digital mode. These can then only be accessed with a security code PIN.

Parental PIN Setup

a Press MENU / C c to highlight Setup icon.

b Press B / C c to highlight System Setup icon and

press OK.

c Press B or b to select DTV Settings and press OK.

d Press B or b to highlight Parental PIN Setup and

press OK.

DTV Settings

Channels Subtitle and Audio Parental PIN Setup

Parental Control

Local Time Setting Standby Channel Update Common Interface

Off

English

e Using the number buttons enter a four digit number.

Once entered you will be prompted to confirm by entering again.

The PIN number is now set.

If the PIN code has been set, when Auto Tuning and Reset TV are executed, entering the PIN will be necessary. “0000” is not acceptable.

CONTROLS AND FEATURES

Parental Setup None

Parental Control

REGZA-LINK Setup

Panel Lock

Off

Auto

Network Setup

Teletext

Guide Type Network Device Setup

Off

Network Lock

Recording Setup

Preferences

Fav.

Channel Options

English

The Parental Control feature allows you to block programmes

according to their rating levels. If a PIN has been set, you will need

Parental Setup

to enter it before adjusting the level.

a In the DTV Settings menu, press B or b to select

Parental Control and press OK.

b Use C or c to choose an option (None or an age

setting (4-17 or 4-18 depending on the Country setting)).

To view blocked programmes, enter the PIN. To reactivate the Parental Control, turn the TV off and then on again.

Network Lock

You can use the Network Lock feature to prevent the Web

browser from launching. When this feature is set to On, PIN input

will be necessary to use network functions.

This feature will be grayed out until a PIN is set.

a Press MENU / C c to highlight Setup icon.

b Press B / C c to highlight Preferences icon and

press OK.

c Press B or bto select Network Lock.

Digital settings – Channel Options

Selecting favourite channels

From the Quick Menu / Channel Options menu, it is possible

to create a list of the digital channels that are watched most.

Press LIST /

a Select a channel you want to add to your favourite list.

b Press QUICK to open the Quick Menu.

c Press b to select Channel Options and press OK.

d Press c to select the favourite list (Fav.).

e Press OK to select the ones required. A tick will appear

f Repeat steps 1 through 5 for other channels.

g When all favourites have been selected, press EXIT.

a Press LIST to display Channel List.

Cc to select the Favourite Channel list.

in the box as they are selected.

Favourite Channel Lists

Each time you press

Channels, Radio channels, Text channels or Favourites is selected in order.

C or c, All Channels, TV

d Press C or c to select On.

To unlock the Network:

a Select Off in step 4 above.

b Press C or c to select Favourites. The number of

favourites available depends on how many lists have been created.

Channel Lists

Favourites

6 M6

9 W9 11 NT1 31 PARIS PREMIERE 34 AB1

51 ITV1

c Press B or b to highlight a channel and press OK to

watch.

CONTROLS AND FEATURES

Subtitle and Audio

Subtitle Type

Secondary Subtitle Language

Primary Subtitle Language

Audio Type Primary Audio Language Secondary Audio Language

English

English English Normal English

Normal

Subtitle Display

Off

English

Skip channels

This feature allows you to set channels that will be skipped when

u or PU are used to tune.

a Select the channel you want to skip in your channel

list.

b From the Quick Menu, press b to select Channel

Options and press OK.

c Press c repeatedly to highlight the skip (8) box.

d Press OK to select. A tick will appear in the box.

e Repeat steps 1 through 4 for other channels.

f Press EXIT.

NOTE: Skipped channels cannot b e se lec ted by P

U but still be accessed by direct number entry

(when tuned a banner to indicate as a skipped channel).

8 icon will be displayed in the

Locking channels

Locking Channels stops the viewing of digital channels, and

they can only be accessed by entering the PIN.

u or

a Select the channel you want to lock in your channel

list.

b From the Quick Menu, press b to select Channel

Options and press OK.

c Press c repeatedly to highlight the lock ( ) box.

d Press OK to select. A tick will appear in the box.

If a PIN has already been set, PIN entry will be required to set the locked channels.

e Repeat steps 1 through 4 for other channels.

f Press EXIT.

g From this point on, when any of the channels in the

Locked Channel list are selected, the PIN must be entered before they can be accessed.

Digital settings – other settings

Subtitles

In digital mode, this feature will show subtitles on the screen in

the selected language provided they are being broadcast.

a In the DTV Settings menu, press B or b to select

Subtitle and Audio and press OK.

b Press b to select Subtitle Display and press C or c

to select On or Off.

c Press B or b to select Primary Subtitle Language or

Secondary Subtitle Language and press

select an option.

The SUBTITLE button can be used to select subtitle on or off for the current channel only and to select the subtitle language if more than one subtitle is available.

Audio languages

This feature allows a programme or film to be viewed with a choice of soundtrack language, provided multiple language

tracks are being b roadcast.

a In the Subtitle and Audio menu, press B or b to

select Audio Type and press or For Hard of Hearing.

C or c to select Normal

b Press B or b to select Primary Audio Language or

Secondary Audio Language and press

select an option.

If more than one soundtrack is available, use the s button to select between them.

C or c to

CONTROLS AND FEATURES

SEARCHING FOR NEW SOFTWARE Searching for a new software upgrade for this TV.

48 %...

CH 31

English

The Common Interface Slot, situated on the side of the television, enables the insertion of a CAM (Conditional Access Module) and

card. These are purchased from a service provider and allow

additional subscription broadcasts to be viewed. For

Common Interface

information, see a service provider.

a Insert the CAM and card into the Common Interface

Slot, following the instructions provided with the CAM. A box will appear on screen to confirm that the CAM has been inserted.

b Press MENU / Cc to highlight Setup icon.

c Press B / C c to highlight System Setup icon and

press OK.

d Press B or b to select DTV Settings and press OK.

e Press B or b to select Common Interface and press

OK.

f Details of the CAM should now be available.

NOTE:

• Software update of a CI Plus CAM may occur automatically if instigated by the broadcaster. This could cause the cancellation of any Reminders/Recordings during this process.

• Some CI or CI+ CAM may not be supported.

• CI+ operation is not guaranteed except for Canal Ready DT T services on suffix FC models.

Software Upgrade and Licences

Searching for New Software

If preferred, software upgrades can be searched for manually

a In the System Setup menu, press B or b to select

b Press B or b to select Search for New Software.

c Press OK. The television will automatically start

TOSHIBA may offer upgrades for the TV’s software in the future.

Before downloading software:

Configure your TV to connect to the Internet.

NOTE: While the upgrade is being performed, you will not be able to watch the TV.

a In the System Setup menu, press B or b to select

using Search for New Software.

Software Upgrade and press OK.

searching for a software upgrade, the progress bar will move along the line.

If an upgrade is found, the television will automatically start downloading. If not, a screen will appear stating that an upgrade is unavailable.

Network Upgrade

The TV’s software is upgraded via the Network.

Software Upgrade and press OK.

b Press B or b to select Network Upgrade and press

OK.

NOTE: If the network is not available, a warning

message will appear.

c The TV software upgrade will start when download

succeeds.

Software Licences

The licences for the software used in this television are available

for viewing.

a In the System Setup menu, press B or b to select

Software Licences and press OK.

A screen will appear displaying all the licensing information required for the televisions software.

CONTROLS AND FEATURES

System Information

2012

6.8.05.1 Jan 19 2012 - 53. 5. 73. 5

MBOOT Version : xxxxxxxx

MFC Version : xxxxxx

WEAK

CH 25

GOOD

CH 33

GOOD

CH 67

GOOD

AVERAGE

STRONG

TOSHIBA

0 0 0

PC Settings

Horizontal Position

Reset

Sampling Clock

Vertical Position Clock Phase

English

System Information and Reset TV

System Information

This feature can be used to check the version of software

currently installed. When in DTV mode, it includes additional

diagnostic information such as signal strength, signal quality,

a In the System Setup menu, press B or b to select

b Press OK to display the System Information.

c For information about the signal quality of a particular

d Press OK for a screen showing detailed technical

Selecting Reset TV will reset all TV settings, including saved

a In the System Setup menu, press B or b to select

b Press OK to select. A screen will appear warning that

centre frequency, modulation, etc.

System Information.

multiplex, press

information about the selected multiplex.

B or b to select that multiplex.

Reset TV

channels, to their original factory values.

Reset TV.

all settings will be lost. Press OK to continue.

When the set powers back on, the Quick Setup screen will appear. Press OK to advance the setup and perform an auto tune. (See “Quick Setup” section on page 16.)

PC Settings

Horizontal and Vertical Position

Connect the PC (as shown in the ‘Connecting a computer’

section) and ensure that a picture is showing on the television

screen. The picture p osition may now be adjusted to suit

a Press MENU / C c to highlight Setup icon.

b Press B / C c to highlight Preferences icon and

press OK.

c Press B or b to select Display Settings and press OK.

d Press B or b to select PC Setting and press OK.

Display Settings

Auto Format On 4:3 Stretch Off Picture Position PC Settings

e Press B or b to select an option and press C or c to

adjust the settings.

The Clock Phase matches the PC signal with the LCD display.

Adjusting this can clear h orizontal stripes and picture blur.

a In the Display Settings menu, press B or b to select

PC Settings and press OK.

b Press B or b to select Clock Phase.

c Press C or c to adjust until the picture clears.

personal preference.

Clock Phase

CONTROLS AND FEATURES

1 2

HDMI 2

HDMI 1

HDMI 3 PC

Inputs DTV Ant

1 2

HDMI 2

HDMI 1

ATV

HDMI 3 PC

Inputs

Press o on the remote

control

Press and hold p / o

on the TV

English

Adjusting the Sampling Clock alters the number of pulses per

scan, this will clear vertical lines on the screen.

Sampling Clock

a In the Display Settings menu, press B or b to select

PC Settings and press OK.

b Press B or b to select Sampling Clock.

c Press C or c to adjust until the picture clears.

Reset

Use Reset to return all items to the original factory settings.

a In the Display Settings menu, press B or b to select

PC Settings and press OK.

b Press B or b to select Reset and press OK.

NOTE: When a PC is connected using HDMI, none of th ese functions will be available.

The screen is disrupted momentarily when adjusting PC Settings. This is not a sign of malfunction.

The default settings and adjustment ranges may vary depending on the input signal format.

Input selection and AV connections

See page 9 for a detailed image showing recommended connections.

Most media recorders and decoders send a signal through the SCART lead to switch the television to the correct Input socket.

Alternatively, press the external source selection button until the picture from connected equipment is shown.

Input selection

Use the Input Selection window if the television does not switch

over automatically.

a By pressing o on the remote control or TV, a list will

appear on screen showing all inputs and external equipment.

HDMI® displays equipment connected to In put HDMI on the back or side of the television.

PC displays a computer connected to Input RGB/PC on the back of the television.

CONTROLS AND FEATURES

REGZA-LINK Setup

Panel Lock

Off

Auto

Network Setup

Teletext

Guide Type Network Device Setup

Off

Network Lock

Preferences

AV Connection

Input Labeling Digital Audio Output

Input Label

Input Labeling

EXT 1

EXT 2 HDMI 1 HDMI 2 HDMI 3

AV Connection

Input Labeling

Digital Audio Output

English

Labeling video input sources

These input labels are shown in the input selector. You can label video inputs according to the devices you have connected to the

TV.

a Press MENU / C c to highlight Setup icon.

b Press B / C c to highlight Preferences icon and

press OK.

c Press B or b to select AV Connection.

d Press OK to display the AV Connection menu.

e Press B or b to highlight Input Labeling and press

OK.

f Press B or b to select Input Labeling and press OK.

g Press B or b to select the item you want to label, and

then press Game, PC, Recorder or Satellite.

C or c to se lect --, Amplifier, Cable, DVD,

h Repeat step 7 for other video inputs.

Digital Audio Output

When connecting a surround sound amplifier to the digital audio

output (Sony/Philips Digital Interface Format [S/PDIF]), the

following options can be selected or adjusted.

a In the Preferences menu, press B or b to select AV

Connection and press OK.

b Press B or b to select Digital Audio Output.

c Press OK to display Digital Audio Output menu and

press

B or b to select an option.

Audio Format:

C or c to select PCM or Auto.

Press

PCM: This mode outputs PCM format to the digital

audio output socket.

Auto: This mode outputs Dolby Digital (if available)

or PCM to the digital audio output socket. Dolby Digital

Dolby Digital Plus MPEG HE-AAC

Audio Delay:

C or c to select Auto or Manual.

Press

Auto: This mode automatically adjusts the audio

timing to meet the video timing. NOTE: The time lag might be large between the image and sound depending on the

connected equipment (amplifier etc.). In that case, select Manual.

Manual:You can manually adjust the audio signal

timing to meet the video signal timing.

Delay Adjustment:

C or c to adjust the audio signal timing

Press (0 – 250ms) to meet the video signal timing.

NOTE:

• This feature is grayed out when Audio Delay is in Auto.

• A time lag will occur when the video signal or audio signal is changed. Adjust the timing accordingly.

• When adjusting the timing, turn down the volume of the AV equipment used as far as possible. Depending on the equipment, noise etc. may occur when the signal is changed.

• Depending on the connected equipment (amplifier, etc.), adjustment may not be possible.

• When the optical digital output setting (Auto is changed, it may be necessary to adjust the timing again.

• Do not use other than for audio output from the AV amplifier, etc. (Malfunction may occur)

S Dolby Digital

S PCM

S Dolby Digital

tPCM)

CONTROLS AND FEATURES

REGZA-LINK Setup

Enable REGZA-LINK

On TV Auto Power On Auto Standby On Amplifier Control On Initial Speaker Setting TV Speakers

Using REGZA-LINK

English

This is a new feature that uses CEC technology and allows you to control Toshiba REGZA-LINK compatible devices from the television remote control via HDMI connection (page 11).

When the Enable REGZA-LINK item in the REGZA-LINK Setup menu is set to On, individual functions also set to On will be activated.

Enable REGZA-LINK

a Press MENU / C c to highlight Setup icon.

b Press B / C c to highlight Preferences icon and

press OK.

c Press B or b to select REGZA-LINK Setup and press

OK.

d Press b to select Enable REGZA-LINK and press C or

c to select On.

NOTE: If you set Enable REGZA-LINK to Off, all other

items will be grayed out.

TV Auto Power

The TV Auto Power setting allows the television to be

automatically switched on if a REGZA-LINK device is turned on.

a In the REGZA-LINK Setup menu, press b to highlight

TV Auto Power.

b Press C or c to select On or Off.

Amplifier Control

When Amplifier Control is set to on/off the connected REGZA-

LINK amplifier.

a In the REGZA-LINK Setup menu, press b to highlight

Amplifier Control.

b Press C or c to select On or Off.

Initial Speaker Setting

The Initial Speaker Setting allows to select TV speakers or

Amplifier speakers.

a In the REGZA-LINK Setup menu, press b to highlight

Initial Speaker Setting.

b Press C or c to select TV Speakers or Amplifier.

REGZA-LINK input source selection

If a REGZA-LINK device with HDMI switching c apability (e.g. AV amplifier) is connected to the HDMI input, you can select another REGZA-LINK device that is connected to the master HDMI device

on the input source list.

a Press o and a list will appear on screen showing

available input sources.

b Press b to select the desired input source with

REGZA-LINK icon.

c Press c and a second selection screen will appear

showing all connected REGZA-LINK equipment.

Inputs TV

2 HDMI 1 HDMI 2 HDMI 3 PC

1 DVD 2 VCR/DVR 3 CBL/SAT 4 GAME/TV 5 AUX

Auto Standby

When Auto Standby is enabled, the television, when switched off, will automatically switch off (standby mode) all connected

REGZA-LINK equipment.

a In the REGZA-LINK Setup menu, press b to highlight

Auto Standby.

b Press C or c to select On or Off.

d Press B or b to select the desired input source, and

then press OK.

NOTE:

• These functions depend on the device connected.

• If you select the REGZA-LINK input source from the popup window, some REGZA-LINK devices may automatically turn on.

• When the television is switched on it will take a few minutes for the REGZA-LINK icon to appear in the list. When an HDMI cable is removed, it will take a few minutes for the icon to disappear.

• If the HDMI cable from connected equipment is changed, Enable REGZA-LINK in the REGZA-LINK Setup menu may need to be reset to On.

• If you change the HDMI lead to a connected device or change an HDMI device setting, reset the Enable REGZA- LINK item on the REGZA-LINK Setup menu from Off to On.

REGZA-LINK one touch play

When connected equipment is switched on, REGZA-LINK will automatically detect the television through the input selection. If the television is in standby, it will be switched on automatically.

These functions can be enabled or disabled from the REGZALINK Setup (see page 68).

NOTE:

• Even if the equipment is showing a menu, the television may automatically show the input source.

• This feature depends on the connected equipment and television state.

CONTROLS AND FEATURES

English

REGZA-LINK system standby

If the television is turned off (standby mode), the television will send a message to turn off (standby mode) all of the REGZA-LINK devices connected to the television.

These functions can be enabled or disabled from the REGZALINK Setup (see page 68).

NOTE: This feature depends on the connected equipment and television state.

TEXT SERVICES

REGZA-LINK Setup

Panel Lock

Off

Auto

Network Setup

Teletext

Guide Type Network Device Setup

Off

Network Lock

Recording Setup

Preferences

Text services

English

This television has a multi-page text memory, which takes a few moments to load. It offers two Modes of viewing text – Auto will display Fastext, if available. List will save your four favourite pages.

Selecting modes

The text character set will be automatical ly chosen by the

language setting in the Setup menu.

a Press MENU / C c to highlight Setup icon.

b Press B / C c to highlight Preferences icon and

press OK.

c Press B or b to select Teletext, and then press C or

c to select Auto or List.

Text information

The TEXT button:

To view text services press TEXT. Press again to superimpose the text over a normal broadcast picture and again to return to normal viewing. Channels cannot be changed until text is cancelled.

The first text page shown will be the initial page.

Any text page can be accessed by entering the 3 digit page number using the numbered buttons, pressing the coloured buttons or pressing P to go back to the previous page.

Sub-pages

The pages on the screen will dynamically update as subpages are received.

If you open a page containing sub-pages, the sub-pages are automatically displayed in sequence. To quit automatic subpage change, press

Once selected, the sub-page you are viewing will be highlighted and, as the television loads any additional subpages, t he colour of the numbers will change, indicating that these pages have been loaded.

These sub-pages will remain available to view until another page is chosen or, in normal TV mode, the channel is changed.

U to advance to the next page and Pu

C or c.

Navigating pages using Auto

If Fastext is available, four coloured titles will appear at the base of the screen.

To access one of the four given subjects, press the relevant coloured button on the remote control.

For further information on your particular text system(s), see the broadcast text index page or consult your local Toshiba dealer.

Navigating pages using LIST

The four coloured choices at the bottom of the screen are numbers – 100, 101, 102 and 103, which have been programmed into the television’s memory. To view these pages, press the relevant coloured buttons.

To change these saved pages, press the relevant coloured button and enter the 3 digit number. This number will change in the top left of the screen and in the coloured highlight.

Press OK to save. Whenever OK is pressed, all four page

numbers showing at the bottom will be saved and the previous ones will be lost.

NOTE: The video signal from the external inputs (EXT-1 and

EXT-2) is not saved.

If OK is not pressed, the selection will be forgotten when the channel is changed.

Other pages may be viewed by entering the 3 digit page number – but DO NOT press OK or these pages will be saved.

Control buttons

Below is a guide to the functions of the remote control text buttons.

k To display the index/initial page:

Press k to access the index/initial page. The one displayed is dependant on the broadcaster.

TEXT To display a page of text:

Press TEXT to display text. Press again to superimpose text over a normal picture. Press again to return to normal te levi sio n vi ewin g. C han nel s can not be c hang ed u nti l th is ha s been done.

A To reveal concealed text:

To discover the solutions on quiz and joke pages press the A button.

B To hold a wanted page:

At times it is convenient to hold a page of text. Press B and

B will appear in the top left of the screen. The page will be

held on screen until the button is pressed again.

C To enlarge the text display size:

Press C once to enlarge the top half of the page, press again to enlarge the bottom half of the page. Press again to revert to normal size.

D To temporarily erase the text screen:

Press D once to erase the text screen temporarily. To recall the text screen, press the button again.

To display news flashes:

Select the news flash page for the chosen text service (see the index page of text service). The news flashes will be displayed as and when they are broadcast.

TEXT SERVICES

English

Remember to cancel text before

changing channels - press the TEXT button twice.

PROBLEM SOLVING

System Setup

Country Germany Colour System

Auto

Menu Language English

ATV Manual Tuning

Manual Fine Tuning

Questions and Answers

English

Below are the answers to some of the most common queries.

Why is there no sound or picture?

Check the television is not in standby mode. Check the mains plug and all mains connections.

There is a picture, but why is there little or no

colour?

When using an external source, for instance, a poor quality video tape, if there is little or no colour,

improvements may sometimes be achieved. The colour is factory set to Auto to automatically displa y the best colour system.

To check that you have the best colour:

a With the external source playing, select Colour

System from the System Setup menu.

b With C or c choose between Auto, PAL, SECAM,

NTSC 4.43 or NTSC 3.58.

Why doesn’t the video/DVD being played show

on screen?

Make sure the media recorder or DVD player is connected to the television as shown on page 9, and

then select the correct input by pressing

Why is there a picture but no sound?

Check all lead connections. No sound or unacceptable format sound may be

received. Check the volume has not been turned down or that sound mute has not been selected. Check shared audio settings.

What else can cause a poor picture?

Interference or a weak signal. Try a different television station. Manual Fine Tuning may help.

a Select the ATV Manual Tuning menu. Highlight the

station and press OK. Then press Fine Tuning.

c to select Manual

b Using B or b adjust to get the best picture and

sound. Press OK and then EXIT.

Why don’t the controls of the television work?

Check that Panel Lock is not On.

Why doesn’t the remote control work?

Check that the batteries aren’t dead or inserted incorrectly.

Why is the digital channel locked?

The channel has been locked in Channel Options (see “Digital settings – Channel Options” section).

Why are some of the digital subscription channels

unavailable?

Your subscription needs upgrading. Contact your service provider.

Why is the soundtrack in English when a different

audio language has been selected?

The programme is currently being broadcast with an English soundtrack only.

Why is there incorrect or no sound when in DTV

mode?

Press s to ensure the hard of hearing option has

not been selected.

PROBLEM SOLVING

English

What is DVB-T?

Digital Video Broadcast via an aerial/antenna.

What is DVB-C?

Digital Video Broadcast via a cable connection.

How are DTV radio channels selected?

Select from All Channel List (LIST button).

What can be done if the PIN number has been

forgotten?

Use the Master PIN code of 1276, then change to a number of your choice. Select Parental PIN Setup

from the DTV Settings menu to enter PIN. Ensure that no-one else can use the Master PIN by removing the Owner’s Manual.

Why are there vertical stripes on the screen when

in PC mode?

The Sampling Clock may need adjustment. Select PC Settings from the Display Settings menu, highlight

Sampling Clock and adjust until the lines clear.

Why are there horizontal stripes and/or blurred

images on the screen when in PC mode?

The Clock Phase may need adjustment. Select PC Settings from the Display Settings menu, highlight

Clock Phase and adjust until the picture clears.

Why when digital subtitles have been selected are

they not showing on screen?

Subtitles are not currently being transmitted by the broadcaster.

Why are there problems with analogue text?

Good performance of text depends on a good strong broadcast signal. This normally requires a roof or loft

aerial. If the text is unreadable or garbled, check the aerial. Go to the main index page of the text service and look for the User Guide. This will explain the basic operation of text in some detail. If further information is needed on how to use text see the text section.

Why is a page number visible at the top of the

screen but no text?

Text has been selected but Teletext information is currently unavailable on the current source.

Why are the colours wrong when an NTSC source

is played?

Connect the source via a SCART lead and play. Select Colour System from the Setup menu.

a Set the Colour to Auto and exit.

b Go to the PICTURE menu and adjust the tint.

Why don’t the devices connected via HDMI

operate properly?

Make sure to use cables with the HDMI logo

Some early HDMI equipment may not work properly with the latest HDMI TV products, due to new standard adoption.

Why don’t the REGZA-LINK devices work?

When the connected REGZA-LINK device does not work correctly after you have changed the settings of

the device, turn off your television and unplug the power cord, and then plug and turn on again. Unplug the HDMI cable of the REGZA-LINK device and lead again.

Why is the REGZA-LINK logo still showing when

the equipment has been disconnected?

If the REGZA-LINK device is disconnected, the logo will disappear after approximately one minute.

Why don’t the networked devices work?

The LAN cables are not connected properly or at all. Connect all cables (see page 13).

Make sure your network address is set up correctly (see page 36).

Why doesn’t the wireless network work?

Make sure the TOSHIBA Dual Band WLAN Adaptor is used (see page 13).

Check that the AP is powered on.

(see page 10).

PROBLEM SOLVING

LED 2LED 1

Why doesn’t the Media Player feature operate?

English

Make sure that devices are connected correctly. Incorrect behaviour may occur with a USB Hub

connection. Check your network setup if us ing DLNA CERTIFIED™ Server.

What do the LEDs on the front of the television

indicate?

Check the table below.

LED indication

LED-1 LED-2

Green Orange Power ON

Green Red Power ON

Green OFF Power ON

Red Orange Power OFF (Standby)

Red Red Power OFF (Standby)

Red OFF Power OFF (Standby)

Programme Timer is set

Programme Timer(Recording) or

Recording is working

Programme Timer is NOT set

Programme Timer is set

Program Timer(Recording) or Recording is

Programme Timer is NOT set

Condition

working

Specifications and accessories

Specification is subject to change without notice.

Receiving systems

DVB-T Broadcast systems/channels

UK UHF 21-68 PAL-I UHF UK21-UK69

France VHF 05-10 (VHF 01- 05)

Germany VHF 05-12

Austria VHF 05-12

Switzerland VHF 05-12

Italy VHF 05-12 (D,E,F,G,H,H1,H2)

Spain UHF 21-69

Nederlands VHF 0 5-12

Greece VHF 05-12

DVB-C Broadcast systems DVB-T2 Broadcast systems (RL95 s eries only)

Video Input PAL, SECAM, NTSC 3.58/4.43

External connections

EXT 1 Input/Output 21-pin SCART RGB, A/V input

EXT 2 Input RCA jacks

HDMI Input HDMI® compliant

PC Input Mini D-sub 15-pin Analogue

Digital Audio Output (S/PDIF) Optical

LAN port RJ-45

USB port Media Player

Headphone socket 3.5mm stereo

Stereo A2, Nicam

Visible Screen Size

(approx.)

Display 16:9

Sound output

(at 10% distortion)

UHF 21-69

Broadcast systems/channels

PAL-B/G UHF E21-E69

SECAM-L UHF F21-F69

SECAM-D/K UHF R21-R69

RCA jack RCA jacks

HDCP compliant

Interface version: USB 2.0 USB class: Mass Storage File system: FAT16 and FAT32 Wireless LAN adaptor ready for a home network, IEEE802.11a/b/g/n compatible USB HDD connection ready

2 carrier system

23 32 40

Main: 10W + 10W (32/40)

VHF E2-E12, S1-S41

VHF F1-F10, B-Q

VHF R1-R12

AV out, TV out

Y, PB/CB, PR/C Video (Y is shared) Audio L + R (shared)

58cm 80cm 102cm

5W + 5W (23)

INFORMATION

Power consumption

(approx.)

Standby power consumption

(approx.)

Energy Efficiency Class 23RL/23SL

On-mode power consumption* (approx.)

Average annual energy consumption** (approx.)

* Tested in accordance with IEC 62087-BD Ed. 2.0:2008 in default

settings.

** Operating 4 hours a day and 365 days a year.

Dimensions

(approx.)

Weight (approx.) 23RL/23SL

Operating condition Temperature 5°C - 35°C (41°F - 94°F)

Supplied accessories • Remote control CT-9040 4, CT-90420

Optional accessories • TOSHIBA Dual Band WLAN Adaptor

23RL/23SL 32RL/32SL 40RL/40SL

0.3W

32RL/32SL 40RL/40SL

23RL/23SL 32RL/32SL 40RL/40SL

(Height dimension includes foot stand)

32RL/32SL 40RL/40SL

Humidity 20 - 80% (non-condensing)

2 batteries (AA, IEC R6 1.5V for CT-90404, AAA, IEC R03 1.5V for CT-90420)

• ‘P’ Clip/Screw (for TV mounting) See page 5.

• 4 spacers for wall mounting

WLM-20U2

• Not guaranteed to work with all USB HDD

39cm (H) 51cm (H) 61cm (H)

5.0kg

9.5kg

14.0kg

45W 71W 90W

A A+ A+

26.0W

33.6W

48.6W

38.0kWh/y

49.1kWh/y

71.0kWh/y

55cm (W) 74cm (W) 92cm (W)

18cm (D) 21cm (D) 22cm (D)

English

Reproduction in whole or part without written permission is strictly prohibited.

TOSHIBA Television Central Europe Sp. z o.o.

ul. Pokoju 1, Biskupice Podgór ne, 55-040 Kobierzyce, Poland

T 3

Toshiba SL970-23, SL970-32, SL970-40 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

INSTALLING YOUR TV

Safety Precautions

Installation and important information

The remote control (CT-90404)

Inserting batteries and effective range

The remote control (CT-90420)

Inserting batteries and effective range

CONNECTING YOUR TV

Connecting external equipment

Connecting an HDMI® device

To connect an HDMI device

REGZA-LINK connection

Connecting a computer

To connect a PC to the RGB/PC terminal

To connect a PC to the HDMI terminal

Connecting a home network

Controls and input connections

Switching on

Using the menu system

Using the TV controls and connections

SETTING UP YOUR TV

Quick Setup

Startup Application

Ant/Cable In (if available)

Auto Tuning

ATV Manual Tuning

Tuning

Skip

Sorting positions

DTV Manual Tuning

Manual Tuning

DTV Settings

Channels

Manual Tuning for DVB-C

Analogue switch-off

Standby Channel Update

Location setting

CONTROLS AND FEATURES

Quick Menu

General controls

Selecting channels

The Time Display – analogue only

Stereo and Bilingual transmissions

Sound controls

Volume controls and sound mute

Dual

Voice Enhancement

Dynamic Bass Boost

Stable Sound®

Balance

Bass, Treble

Dynamic Range Control

Audio Level Offset

Audio Description

TV Speakers On/Off

Headphone Settings

Widescreen viewing

Picture Mode

Reset

ColourMaster

Picture controls

Picture preferences

Base Colour Adjustment

Colour Temperature

Auto Brightness Sensor

Active Backlight Control

Black/White Level

MPEG NR – Noise Reduction

Picture Position

DNR – Digital Noise Reduction

Cinema Mode

Resetting the advanced picture settings

4:3 Stretch

Blue Screen

Automatic Format (Widescreen)

Picture still