Toshiba Satellite 1400, Satellite 2400, Satellite 1400 Series, Satellite 2400 Series, PS140 User Manual

TOSHIBA

Satellite 1400/2400 Series

Portable Personal Computer

User ’s Manual

Copyright

© 2002 by TOSHIBA Corporation. All rights reserved. Under the copyright laws,
this manual cannot be reproduced in any form without the prior written permission
of TOSHIBA. No patent liability is assumed, with respect to the use of the informa­tion contained herein.

TOSHIBA Satellite 1400/2400 Series Portable Personal Computer User’s Manual

First edition May 2002

Disclaimer

This manual has been validated and reviewed for accuracy. The instructions and
descriptions it contains are accurate for the Satellite 1400/2400 series Portable
Personal Computers at the time of this manual’s production. However, succeeding
computers and manuals are subject to change without notice. TOSHIBA assumes
no liability for damages incurred directly or indirectly from errors, omissions or
discrepancies between the computer and the manual.

Trademarks

IBM is a registered trademark and IBM PC, OS/2, and PS/2 are trademarks of
International Business Machines Corporation.
Celeron, Intel, Intel SpeedStep, and Pentium are trademarks or registered trademarks
of Intel Corporation or its subsidiaries in the United States and other countries.
MS-DOS, Microsoft, Windows and DirectX are registered trademarks of Microsoft
Corporation.
Centronics is a registered trademark of Centronics Data Computer Corporation.
Photo CD is a trademark of Eastman Kodak.
Other trademarks and registered trademarks not listed above may be used in this
manual.

FCC information

Product Name :

Satellite 1400/2400 series

Model number :

PS140/PS240

FCC notice "Declaration of Conformity
Information"

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa­tion. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interfer­ence will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

◆ Reorient or relocate the receiving antenna.

◆ Increase the separation between the equipment and receiver.

◆ Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

◆ Consult the dealer or an experienced radio/TV technician for help.

WARNING: Only peripherals complying with the FCC class B limits may
be attached to this equipment. Operation with non-compliant peripher­als or peripherals not recommended by Toshiba is likely to result in
interference to radio and TV reception. Shielded cables must be used
between the external devices and the computer’s or expansion unit’s
external monitor port, parallel port, USB port and microphone jack. The
modular cable comes with a core attached, while the LAN cable comes
with a core packed separately. Changes or modifications made to this
equipment, not expressly approved by Toshiba or parties authorized by
Toshiba could void the user’s authority to operate the equipment.

FCC conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:

1 . This device may not cause harmful interference.
2 . This device must accept any interference received, including interference that

may cause undesired operation.

Contact

Address: Toshiba America Information Systems, Inc.

9740 Irvine Boulevard
Irvine, California 92618-1697

Telephone: [phone]

EU Declaration of Conformity

T oshiba declares, that the product: PS140/PS240 conforms to the following
Standards:

Supplementary Information: “The product complies with the requirements

of the Low Voltage Directive 73/23/EEC and
the EMC Directive 89/336/EEC and/or the
R&TTE Directive 1999/05/EEC.”

This product is carrying the CE-Mark in accordance with the related European
Directives. Responsible for CE-Marking is Toshiba Europe, Hammfelddamm 8, 41460
Neuss, Germany.

VCCI Class B ITE

PRODUCT IS CERTIFIED BY THE
MANUF A CTURER T O COMPLY
WITH DHHS RULES 21 CFR
SUBCHAPTER J APPLICABLE AT
THE DATE OF MANUFACTURE.

MANUFACTURED:

TOSHIBA CORPORATION
1-1, SHIBAURA 1-CHOME
MINATO-KU, TOKYO 105-8001,
JAPAN

TOSHIBA CD-RW/DVD-ROM drive
SD-R2102 safety instruction

CAUTIONS: 1. The CD-RW/DVD-ROM drive employs a laser system. To

ensure proper use of this product, please read this
instruction manual carefully and retain for future
reference. Should the unit ever require maintenance,
contact an authorized service location.

2. Use of controls, adjustments or the performance of
procedures other than those specified may result in
hazardous radiation exposure.

3. To prevent direct exposure to the laser beam, do not try
to open the enclosure.

Location of the required label

CAUTION: This appliance contains a laser
system and is classified as a “CLASS 1 LASER
PRODUCT.” To use this model properly, read
the instruction manual carefully and keep this
manual for your future reference. In case of any
trouble with this model, please contact your
nearest “AUTHORIZED service station.” To
prevent direct exposure to the laser beam, do
not try to open the enclosure.

VORSICHT: Dieses Gerät enthält ein Laser­System und ist als “LASERSCHUTZKLASSE 1
PRODUKT” klassifiziert. Für den richtigen
Gebrauch dieses Modells lesen Sie bitte die
Bedienungsanleitung sorgfältig durch und
bewahren diese bitte als Referenz auf. Falls
Probleme mit diesem Modell auftreten,
benachrichtigen Sie bitte die nächste
“autorisierte Service-Vertretung”. Um einen
direkten Kontakt mit dem Laserstrahl zu
vermeiden darf das Gerät nicht geöffnet
werden.

ADVARSEL: Denne mærking er anbragt
udvendigt på apparatet og indikerer, at
apparatet arbejder med laserstråler af klasse 1,
hviket betyder, at der anvendes laserstrlier af
svageste klasse, og at man ikke på apparatets
yderside kan bilve udsat for utilladellg kraftig
stråling.

APPARATET BOR KUN ÅBNES AF FAGFOLK
MED SÆRLIGT KENDSKAB TIL APPARATER
MED LASERSTRÅLER!

Indvendigt i apparatet er anbragt den her
gengivne advarselsmækning, som advarer imod
at foretage sådanne indgreb i apparatet, at man
kan komme til at udsætte sig for laserstråling.

OBS! Apparaten innehåller laserkomponent
som avger laserstråining överstigande gränsen
för laserklass 1.

ADVERSEL: USYNLIG
LASERSTRÅLING VED ÅBNING,

NÅR SIKKERHEDSAF-BRYDER
ER UDE AF FUNKTION.

UNDGÅ UDSÆTTELSE FOR
STRÅLING

CLASS 1 LASER PRODUCT
LASERSCHUTZKLASSE 1
PRODUKT
TO EN60825

VAROITUS. Suojakoteloa si saa avata. Laite
sisältää laserdiodin, joka lähetää näkymätöntä
silmilie vaarallista lasersäteilyä.

CAUTION: USE OF CONTROLS OR ADJUST­MENTS OR PERFORMANCE OF PROCE­DURES OTHER THAN THOSE SPECIFIED IN
THE OWNER’S MANUAL MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.

VORSICHT: DIE VERWENDUNG VON
ANDEREN STEURUNGEN ODER
EINSTELLUNGEN ODER DAS
DURCHFÜHREN VON ANDEREN
VORGÄNGEN ALS IN DER
BEDIENUNGSANLEITUNG BESCHRIEBEN
KÖNNEN GEFÄHRLICHE
STRAHLENEXPOSITIONEN ZUR FOLGE
HABEN.

Matsushita CD-RW/DVD-ROM drive
UJDA720** safety instruction

** means any letters or numbers.

CAUTIONS: 1. The CD-RW/DVD-ROM drive employs a laser system. To

ensure proper use of this product, please read this
instruction manual carefully and retain for future
reference. Should the unit ever require maintenance,
contact an authorized service location.

2. Use of controls, adjustments or the performance of
procedures other than those specified may result in
hazardous radiation exposure.

3. To prevent direct exposure to the laser beam, do not try
to open the enclosure.

Location of the required label

COMPLIES WITH FDA RADIATION
PERFORMANCE ST ANDARDS, 21 CFR
SUBCHAPTER J.

MANUFACTURED:

Manufactured by
Kyushu Matsushita Electric Co., Ltd.
1-62 4-Chome Minoshima, Hakata-Ku
Fukuoka,Japan

Location of the required label

CLASS 1 LASER PRODUCT
LASERSCHUTZKLASSE 1
PRODUKT
TO EN60825

CAUTION: This appliance contains a laser
system and is classified as a “CLASS 1 LASER
PRODUCT.” To use this model properly, read
the instruction manual carefully and keep this
manual for your future reference. In case of any
trouble with this model, please contact your
nearest “AUTHORIZED service station.” To
prevent direct exposure to the laser beam, do
not try to open the enclosure.

VORSICHT: Dieses Gerät enthält ein Laser­System und ist als “LASERSCHUTZKLASSE 1
PRODUKT” klassifiziert. Für den richtigen
Gebrauch dieses Modells lesen Sie bitte die
Bedienungsanleitung sorgfältig durch und
bewahren diese bitte als Referenz auf. Falls
Probleme mit diesem Modell auftreten,
benachrichtigen Sie bitte die nächste
“autorisierte Service-Vertretung”. Um einen
direkten Kontakt mit dem Laserstrahl zu
vermeiden darf das Gerät nicht geöffnet
werden.

ADVARSEL: Denne mærking er anbragt
udvendigt på apparatet og indikerer, at
apparatet arbejder med laserstråler af klasse 1,
hviket betyder, at der anvendes laserstrlier af
svageste klasse, og at man ikke på apparatets
yderside kan bilve udsat for utilladellg kraftig
stråling.

APPARATET BOR KUN ÅBNES AF FAGFOLK
MED SÆRLIGT KENDSKAB TIL APPARATER
MED LASERSTRÅLER!

Indvendigt i apparatet er anbragt den her
gengivne advarselsmækning, som advarer imod
at foretage sådanne indgreb i apparatet, at man
kan komme til at udsætte sig for laserstråling.

OBS! Apparaten innehåller laserkomponent
som avger laserstråining överstigande gränsen
för laserklass 1.

VAROITUS. Suojakoteloa si saa avata. Laite
sisältää laserdiodin, joka lähetää näkymätöntä
silmilie vaarallista lasersäteilyä.

CAUTION: USE OF CONTROLS OR ADJUST­MENTS OR PERFORMANCE OF PROCE­DURES OTHER THAN THOSE SPECIFIED IN
THE OWNER’S MANUAL MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.

VORSICHT: DIE VERWENDUNG VON
ANDEREN STEURUNGEN ODER
EINSTELLUNGEN ODER DAS
DURCHFÜHREN VON ANDEREN
VORGÄNGEN ALS IN DER
BEDIENUNGSANLEITUNG BESCHRIEBEN
KÖNNEN GEFÄHRLICHE
STRAHLENEXPOSITIONEN ZUR FOLGE
HABEN.

ADVERSEL: USYNLIG
LASERSTRÅLING VED ÅBNING,

NÅR SIKKERHEDSAF-BRYDER
ER UDE AF FUNKTION.

UNDGÅ UDSÆTTELSE FOR
STRÅLING

THIS PRODUCT COMPLIES WITH
DHHS RULES 21 CFR CHAPTER 1,
SUBCHAPTER J APPLICABLE AT
DATE OF MANUFACTURE.

MANUFACTURED:

Manufactured by
TEAC Corporation
3-7-3 Naka-cho, Musashino-shi,
Tokyo, Japan

TEAC CD-RW/DVD-ROM drive
DW-28E** safety instruction

** means any letters or numbers.

This product has been designed and manufactured according to FDA
regulations "title 21. CFR. chapter 1, subchapter J. based on the
radiation Control for Health and Safety Act of 1968," and is classified
as a class 1 laser product. There is no hazardous invisible laser
radiation confined in the protective housings.

The label required in this regulation is shown below.
CAUTION
Use of controls or adjustments or performance of procedures other

than those specified herein may result in hazardous radiation exposure.

Optical pickup
Type : 007XL
Manufacturer : Matsushita Electric Industrial Co., Ltd.
Laser output : Less than 1.3m W (Play) and 28m W

(Record) on the objective lens
Wavelength : 777-787nm (CD)

647~687mm (DVD)

Location of the required label

CAUTION: This appliance contains a laser
system and is classified as a “CLASS 1 LASER
PRODUCT.” To use this model properly, read
the instruction manual carefully and keep this
manual for your future reference. In case of any
trouble with this model, please contact your
nearest “AUTHORIZED service station.” To
prevent direct exposure to the laser beam, do
not try to open the enclosure.

VORSICHT: Dieses Gerät enthält ein Laser­System und ist als “LASERSCHUTZKLASSE 1
PRODUKT” klassifiziert. Für den richtigen
Gebrauch dieses Modells lesen Sie bitte die
Bedienungsanleitung sorgfältig durch und
bewahren diese bitte als Referenz auf. Falls
Probleme mit diesem Modell auftreten,
benachrichtigen Sie bitte die nächste
“autorisierte Service-Vertretung”. Um einen
direkten Kontakt mit dem Laserstrahl zu
vermeiden darf das Gerät nicht geöffnet
werden.

ADVARSEL: Denne mærking er anbragt
udvendigt på apparatet og indikerer, at
apparatet arbejder med laserstråler af klasse 1,
hviket betyder, at der anvendes laserstrlier af
svageste klasse, og at man ikke på apparatets
yderside kan bilve udsat for utilladellg kraftig
stråling.

APPARATET BOR KUN ÅBNES AF FAGFOLK
MED SÆRLIGT KENDSKAB TIL APPARATER
MED LASERSTRÅLER!

Indvendigt i apparatet er anbragt den her
gengivne advarselsmækning, som advarer imod
at foretage sådanne indgreb i apparatet, at man
kan komme til at udsætte sig for laserstråling.

CLASS 1 LASER PRODUCT
LASERSCHUTZKLASSE 1
PRODUKT
TO EN60825

ADVERSEL: USYNLIG
LASERSTRÅLING VED ÅBNING,

NÅR SIKKERHEDSAF-BRYDER
ER UDE AF FUNKTION.

UNDGÅ UDSÆTTELSE FOR
STRÅLING

OBS! Apparaten innehåller laserkomponent
som avger laserstråining överstigande gränsen
för laserklass 1.

VAROITUS. Suojakoteloa si saa avata. Laite
sisältää laserdiodin, joka lähetää näkymätöntä
silmilie vaarallista lasersäteilyä.

CAUTION: USE OF CONTROLS OR ADJUST­MENTS OR PERFORMANCE OF PROCE­DURES OTHER THAN THOSE SPECIFIED IN
THE OWNER’S MANUAL MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.

VORSICHT: DIE VERWENDUNG VON
ANDEREN STEURUNGEN ODER
EINSTELLUNGEN ODER DAS
DURCHFÜHREN VON ANDEREN
VORGÄNGEN ALS IN DER
BEDIENUNGSANLEITUNG BESCHRIEBEN
KÖNNEN GEFÄHRLICHE
STRAHLENEXPOSITIONEN ZUR FOLGE
HABEN.

PRODUCT IS CERTIFIED BY THE
MANUFACTURER TO COMPLY
WITH DHHS RULES 21 CFR
SUBCHAPTER J APPLICABLE A T
THE DATE OF MANUFACTURE.

MANUFACTURED:

TOSHIBA CORPORATION
1-1, SHIBAURA 1-CHOME
MINATO-KU, TOKYO 105-8001,
JAPAN

TOSHIBA DVD-ROM drive SD-C2502**
safety instruction

** means any letters or numbers.

CAUTIONS: 1. The DVD-ROM drive employs a laser system. To ensure

proper use of this product, please read this instruction
manual carefully and retain for future reference. Should
the unit ever require maintenance, contact an autho­rized service location.

2. Use of controls, adjustments or the performance of
procedures other than those specified may result in
hazardous radiation exposure.

3. To prevent direct exposure to the laser beam, do not try
to open the enclosure.

Location of the required label (SD-C2502)

ADVERSEL: USYNLIG
LASERSTRÅLING VED ÅBNING,

NÅR SIKKERHEDSAF-BRYDER
ER UDE AF FUNKTION.

UNDGÅ UDSÆTTELSE FOR
STRÅLING

CAUTION: This appliance contains a laser
system and is classified as a “CLASS 1 LASER
PRODUCT.” To use this model properly, read
the instruction manual carefully and keep this
manual for your future reference. In case of any
trouble with this model, please contact your
nearest “AUTHORIZED service station.” To
prevent direct exposure to the laser beam, do
not try to open the enclosure.

VORSICHT: Dieses Gerät enthält ein Laser­System und ist als “LASERSCHUTZKLASSE 1
PRODUKT” klassifiziert. Für den richtigen
Gebrauch dieses Modells lesen Sie bitte die
Bedienungsanleitung sorgfältig durch und
bewahren diese bitte als Referenz auf. Falls
Probleme mit diesem Modell auftreten,
benachrichtigen Sie bitte die nächste
“autorisierte Service-Vertretung”. Um einen
direkten Kontakt mit dem Laserstrahl zu
vermeiden darf das Gerät nicht geöffnet
werden.

ADVARSEL: Denne mærking er anbragt
udvendigt på apparatet og indikerer, at
apparatet arbejder med laserstråler af klasse 1,
hviket betyder, at der anvendes laserstrlier af
svageste klasse, og at man ikke på apparatets
yderside kan bilve udsat for utilladellg kraftig
stråling.

APPARATET BOR KUN ÅBNES AF FAGFOLK
MED SÆRLIGT KENDSKAB TIL APPARATER
MED LASERSTRÅLER!

Indvendigt i apparatet er anbragt den her
gengivne advarselsmækning, som advarer imod
at foretage sådanne indgreb i apparatet, at man
kan komme til at udsætte sig for laserstråling.

OBS! Apparaten innehåller laserkomponent
som avger laserstråining överstigande gränsen
för laserklass 1.

CLASS 1 LASER PRODUCT
LASERSCHUTZKLASSE 1
PRODUKT
TO EN60825

VAROITUS. Suojakoteloa si saa avata. Laite
sisältää laserdiodin, joka lähetää näkymätöntä
silmilie vaarallista lasersäteilyä.

CAUTION: USE OF CONTROLS OR ADJUST­MENTS OR PERFORMANCE OF PROCE­DURES OTHER THAN THOSE SPECIFIED IN
THE OWNER’S MANUAL MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.

VORSICHT: DIE VERWENDUNG VON
ANDEREN STEURUNGEN ODER
EINSTELLUNGEN ODER DAS
DURCHFÜHREN VON ANDEREN
VORGÄNGEN ALS IN DER
BEDIENUNGSANLEITUNG BESCHRIEBEN
KÖNNEN GEFÄHRLICHE
STRAHLENEXPOSITIONEN ZUR FOLGE
HABEN.

TEAC DVD-ROM drive DV-28E-B34
safety instruction

CAUTIONS: 1. The DVD-ROM drive employs a laser system. To ensure

proper use of this product, please read this instruction
manual carefully and retain for future reference. Should
the unit ever require maintenance, contact an autho­rized service location.

2. Use of controls, adjustments or the performance of
procedures other than those specified may result in
hazardous radiation exposure.

3. To prevent direct exposure to the laser beam, do not try
to open the enclosure.

CLASS 1 LASER PRODUCT
LASERSCHUTZKLASSE 1
PRODUKT
TO EN60825

Location of the required label

CAUTION: This appliance contains a laser
system and is classified as a “CLASS 1 LASER
PRODUCT.” To use this model properly, read
the instruction manual carefully and keep this
manual for your future reference. In case of any
trouble with this model, please contact your
nearest “AUTHORIZED service station.” To
prevent direct exposure to the laser beam, do
not try to open the enclosure.

VORSICHT: Dieses Gerät enthält ein Laser­System und ist als “LASERSCHUTZKLASSE 1
PRODUKT” klassifiziert. Für den richtigen
Gebrauch dieses Modells lesen Sie bitte die
Bedienungsanleitung sorgfältig durch und
bewahren diese bitte als Referenz auf. Falls
Probleme mit diesem Modell auftreten,
benachrichtigen Sie bitte die nächste
“autorisierte Service-Vertretung”. Um einen
direkten Kontakt mit dem Laserstrahl zu
vermeiden darf das Gerät nicht geöffnet
werden.

CERTIFICATION: THIS

PRODUCT COMPLIES WITH
DHHS RULES 21 CFR CHAPTER
1, SUBCHAPTER J APPLICABLE
AT DA TE OF MANUFACTURE.

CLASS 1 LASER PRODUCT
LASER KLASSE 1

TEAC CORPORATION
3-7-3 NAKA-CHO,
MUSASHINO-SHI
TOKYO, JAPAN

ADVARSEL: Denne mærking er anbragt
udvendigt på apparatet og indikerer, at
apparatet arbejder med laserstråler af klasse 1,
hviket betyder, at der anvendes laserstrlier af
svageste klasse, og at man ikke på apparatets
yderside kan bilve udsat for utilladellg kraftig
stråling.

APPARATET BOR KUN ÅBNES AF FAGFOLK
MED SÆRLIGT KENDSKAB TIL APPARATER
MED LASERSTRÅLER!

Indvendigt i apparatet er anbragt den her
gengivne advarselsmækning, som advarer imod
at foretage sådanne indgreb i apparatet, at man
kan komme til at udsætte sig for laserstråling.

OBS! Apparaten innehåller laserkomponent
som avger laserstråining överstigande gränsen
för laserklass 1.

VAROITUS. Suojakoteloa si saa avata. Laite
sisältää laserdiodin, joka lähetää näkymätöntä
silmilie vaarallista lasersäteilyä.

CAUTION: USE OF CONTROLS OR ADJUST­MENTS OR PERFORMANCE OF PROCE­DURES OTHER THAN THOSE SPECIFIED IN
THE OWNER’S MANUAL MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.

VORSICHT: DIE VERWENDUNG VON
ANDEREN STEURUNGEN ODER
EINSTELLUNGEN ODER DAS
DURCHFÜHREN VON ANDEREN
VORGÄNGEN ALS IN DER
BEDIENUNGSANLEITUNG BESCHRIEBEN
KÖNNEN GEFÄHRLICHE
STRAHLENEXPOSITIONEN ZUR FOLGE
HABEN.

ADVERSEL: USYNLIG
LASERSTRÅLING VED ÅBNING,

NÅR SIKKERHEDSAF-BRYDER
ER UDE AF FUNKTION.

UNDGÅ UDSÆTTELSE FOR
STRÅLING

HITACHI DVD-ROM drive
GDR-8081N-A TAB** safety instruction

** means any letters or numbers.

CAUTIONS: 1. The DVD-ROM drive employs a laser system. To ensure

proper use of this product, please read this instruction
manual carefully and retain for future reference. Should
the unit ever require maintenance, contact an autho­rized service location.

2. Use of controls, adjustments or the performance of
procedures other than those specified may result in
hazardous radiation exposure.

3. To prevent direct exposure to the laser beam, do not try
to open the enclosure.

THIS PRODUCT COMPLIES WITH
DHHS RULES 21 CFR SUBCHAPTER
J APPLICABLE AT DATE OF MANU­FACTURE.

MANUFACTURED:

Hitachi-LG Data Storage, Inc.
26-5, TORANOMON 1-CHOME,
MINATO-KU, TOKYO, 105-0001
JAPAN

Location of the required label

CLASS 1 LASER PRODUCT
LASERSCHUTZKLASSE 1
PRODUKT
TO EN60825

CAUTION: This appliance contains a laser
system and is classified as a “CLASS 1 LASER
PRODUCT.” To use this model properly, read
the instruction manual carefully and keep this
manual for your future reference. In case of any
trouble with this model, please contact your
nearest “AUTHORIZED service station.” To
prevent direct exposure to the laser beam, do
not try to open the enclosure.

VORSICHT: Dieses Gerät enthält ein Laser­System und ist als “LASERSCHUTZKLASSE 1
PRODUKT” klassifiziert. Für den richtigen
Gebrauch dieses Modells lesen Sie bitte die
Bedienungsanleitung sorgfältig durch und
bewahren diese bitte als Referenz auf. Falls
Probleme mit diesem Modell auftreten,
benachrichtigen Sie bitte die nächste
“autorisierte Service-Vertretung”. Um einen
direkten Kontakt mit dem Laserstrahl zu
vermeiden darf das Gerät nicht geöffnet
werden.

ADVARSEL: Denne mærking er anbragt
udvendigt på apparatet og indikerer, at
apparatet arbejder med laserstråler af klasse 1,
hviket betyder, at der anvendes laserstrlier af
svageste klasse, og at man ikke på apparatets
yderside kan bilve udsat for utilladellg kraftig
stråling.

APPARATET BOR KUN ÅBNES AF FAGFOLK
MED SÆRLIGT KENDSKAB TIL APPARATER
MED LASERSTRÅLER!

Indvendigt i apparatet er anbragt den her
gengivne advarselsmækning, som advarer imod
at foretage sådanne indgreb i apparatet, at man
kan komme til at udsætte sig for laserstråling.

OBS! Apparaten innehåller laserkomponent
som avger laserstråining överstigande gränsen
för laserklass 1.

ADVERSEL: USYNLIG
LASERSTRÅLING VED ÅBNING,

NÅR SIKKERHEDSAF-BRYDER
ER UDE AF FUNKTION.

UNDGÅ UDSÆTTELSE FOR
STRÅLING

VAROITUS. Suojakoteloa si saa avata. Laite
sisältää laserdiodin, joka lähetää näkymätöntä
silmilie vaarallista lasersäteilyä.

CAUTION: USE OF CONTROLS OR ADJUST­MENTS OR PERFORMANCE OF PROCE­DURES OTHER THAN THOSE SPECIFIED IN
THE OWNER’S MANUAL MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.

VORSICHT: DIE VERWENDUNG VON
ANDEREN STEURUNGEN ODER
EINSTELLUNGEN ODER DAS
DURCHFÜHREN VON ANDEREN
VORGÄNGEN ALS IN DER
BEDIENUNGSANLEITUNG BESCHRIEBEN
KÖNNEN GEFÄHRLICHE
STRAHLENEXPOSITIONEN ZUR FOLGE
HABEN.

Matsushita CD-R/RW drive UJDA340**
safety instruction

** means any letters or numbers.

CAUTIONS: 1. The CD-R/RW drive employs a laser system. To ensure

proper use of this product, please read this instruction
manual carefully and retain for future reference. Should
the unit ever require maintenance, contact an autho­rized service location.

2. Use of controls, adjustments or the performance of
procedures other than those specified may result in
hazardous radiation exposure.

3. To prevent direct exposure to the laser beam, do not try
to open the enclosure.

COMPLIES WITH FDA RADIA TION
PERFORMANCE STANDRDS, 21 CFR
SUBCHAPTER J.

MANUFACTURED:

Manufactured by
Kyushu Matsushita Electric Co., Ltd.
1-62 4-Chome Minoshima, Hakata-Ku
Fukuoka,Japan

Location of the required label

CAUTION: This appliance contains a laser
system and is classified as a “CLASS 1 LASER
PRODUCT.” To use this model properly, read
the instruction manual carefully and keep this
manual for your future reference. In case of any
trouble with this model, please contact your
nearest “AUTHORIZED service station.” To
prevent direct exposure to the laser beam, do
not try to open the enclosure.

VORSICHT: Dieses Gerät enthält ein Laser­System und ist als “LASERSCHUTZKLASSE 1
PRODUKT” klassifiziert. Für den richtigen
Gebrauch dieses Modells lesen Sie bitte die
Bedienungsanleitung sorgfältig durch und
bewahren diese bitte als Referenz auf. Falls
Probleme mit diesem Modell auftreten,
benachrichtigen Sie bitte die nächste
“autorisierte Service-Vertretung”. Um einen
direkten Kontakt mit dem Laserstrahl zu
vermeiden darf das Gerät nicht geöffnet
werden.

CLASS 1 LASER PRODUCT
LASERSCHUTZKLASSE 1
PRODUKT
TO EN60825

ADVARSEL: Denne mærking er anbragt
udvendigt på apparatet og indikerer, at
apparatet arbejder med laserstråler af klasse 1,
hviket betyder, at der anvendes laserstrlier af
svageste klasse, og at man ikke på apparatets
yderside kan bilve udsat for utilladellg kraftig
stråling.

APPARATET BOR KUN ÅBNES AF FAGFOLK
MED SÆRLIGT KENDSKAB TIL APPARATER
MED LASERSTRÅLER!

Indvendigt i apparatet er anbragt den her
gengivne advarselsmækning, som advarer imod
at foretage sådanne indgreb i apparatet, at man
kan komme til at udsætte sig for laserstråling.

OBS! Apparaten innehåller laserkomponent
som avger laserstråining överstigande gränsen
för laserklass 1.

VAROITUS. Suojakoteloa si saa avata. Laite
sisältää laserdiodin, joka lähetää näkymätöntä
silmilie vaarallista lasersäteilyä.

CAUTION: USE OF CONTROLS OR ADJUST­MENTS OR PERFORMANCE OF PROCE­DURES OTHER THAN THOSE SPECIFIED IN
THE OWNER’S MANUAL MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.

VORSICHT: DIE VERWENDUNG VON
ANDEREN STEURUNGEN ODER
EINSTELLUNGEN ODER DAS
DURCHFÜHREN VON ANDEREN
VORGÄNGEN ALS IN DER
BEDIENUNGSANLEITUNG BESCHRIEBEN
KÖNNEN GEFÄHRLICHE
STRAHLENEXPOSITIONEN ZUR FOLGE
HABEN.

ADVERSEL: USYNLIG
LASERSTRÅLING VED ÅBNING,

NÅR SIKKERHEDSAF-BRYDER
ER UDE AF FUNKTION.

UNDGÅ UDSÆTTELSE FOR
STRÅLING

TEAC CD-ROM drive CD-224E**
safety instruction

** means any letters or numbers.

CAUTIONS: 1. The CD-ROM drive employs a laser system. To ensure

proper use of this product, please read this instruction
manual carefully and retain for future reference. Should
the unit ever require maintenance, contact an autho­rized service location.

2. Use of controls, adjustments or the performance of
procedures other than those specified may result in
hazardous radiation exposure.

3. To prevent direct exposure to the laser beam, do not try
to open the enclosure.

Location of the required label

CERTIFICATION: THIS

PRODUCT COMPLIES WITH
DHHS RULES 21 CFR CHAPTER
1, SUBCHAPTER J APPLICABLE
AT DATE OF MANUFACTURE.

CLASS 1 LASER PRODUCT
LASER KLASSE 1

TEAC CORPORATION
3-7-3 NAKA-CHO,
MUSASHINO-SHI
TOKYO, JAPAN

CAUTION: This appliance contains a laser
system and is classified as a “CLASS 1 LASER
PRODUCT.” To use this model properly, read
the instruction manual carefully and keep this
manual for your future reference. In case of any
trouble with this model, please contact your
nearest “AUTHORIZED service station.” To
prevent direct exposure to the laser beam, do
not try to open the enclosure.

VORSICHT: Dieses Gerät enthält ein Laser­System und ist als “LASERSCHUTZKLASSE 1
PRODUKT” klassifiziert. Für den richtigen
Gebrauch dieses Modells lesen Sie bitte die
Bedienungsanleitung sorgfältig durch und
bewahren diese bitte als Referenz auf. Falls
Probleme mit diesem Modell auftreten,
benachrichtigen Sie bitte die nächste
“autorisierte Service-Vertretung”. Um einen
direkten Kontakt mit dem Laserstrahl zu
vermeiden darf das Gerät nicht geöffnet werden.

ADVARSEL: Denne mærking er anbragt
udvendigt på apparatet og indikerer, at
apparatet arbejder med laserstråler af klasse 1,
hviket betyder, at der anvendes laserstrlier af
svageste klasse, og at man ikke på apparatets
yderside kan bilve udsat for utilladellg kraftig
stråling.

APPARATET BOR KUN ÅBNES AF FAGFOLK
MED SÆRLIGT KENDSKAB TIL APPARATER
MED LASERSTRÅLER!

Indvendigt i apparatet er anbragt den her
gengivne advarselsmækning, som advarer imod
at foretage sådanne indgreb i apparatet, at man
kan komme til at udsætte sig for laserstråling.

OBS! Apparaten innehåller laserkomponent
som avger laserstråining överstigande gränsen
för las2erklass 1.

CLASS 1 LASER PRODUCT
LASERSCHUTZKLASSE 1
PRODUKT
TO EN60825

ADVERSEL: USYNLIG
LASERSTRÅLING VED ÅBNING,

NÅR SIKKERHEDSAF-BRYDER
ER UDE AF FUNKTION.

UNDGÅ UDSÆTTELSE FOR
STRÅLING

VAROITUS. Suojakoteloa si saa avata. Laite
sisältää laserdiodin, joka lähetää näkymätöntä
silmilie vaarallista lasersäteilyä.

CAUTION: USE OF CONTROLS OR ADJUST­MENTS OR PERFORMANCE OF PROCE­DURES OTHER THAN THOSE SPECIFIED IN
THE OWNER'S MANUAL MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.

VORSICHT: DIE VERWENDUNG VON
ANDEREN STEURUNGEN ODER
EINSTELLUNGEN ODER DAS
DURCHFÜHREN VON ANDEREN
VORGÄNGEN ALS IN DER
BEDIENUNGSANLEITUNG BESCHRIEBEN
KÖNNEN GEFÄHRLICHE
STRAHLENEXPOSITIONEN ZUR FOLGE
HABEN.

Modem warning notice

Conformity Statement

The equipment has been approved to [Commission Decision “CTR21”] for pan­European single terminal connection to the Public Switched Telephone Network
(PSTN).

However, due to differences between the individual PSTNs provided in different
countries/regions the approval does not, of itself, give an unconditional assurance
of successful operation on every PSTN network termination point.

In the event of problems, you should contact your equipment supplier in the first
instance.

Network Compatibility Statement

This product is designed to work with, and is compatible with the following
networks. It has been tested to and found to confirm with the additional require­ments conditional in EG 201 121.

Germany ATAAB AN005,AN006,AN007,AN009,AN010 and

DE03,04,05,08,09,12,14,17
Greece ATAAB AN005,AN006 and GR01,02,03,04
Portugal ATAAB AN001,005,006,007,011 and P03,04,08,10
Spain ATAAB AN005,007,012, and ES01
Switzerland ATAAB AN002
All other countries/ ATAAB AN003,004

regions
Specific switch settings or software setup are required for each network, please refer

to the relevant sections of the user guide for more details.
The hookflash (timed break register recall) function is subject to separate national

type approvals. It has not been tested for conformity to national type regulations,
and no guarantee of successful operation of that specific function on specific
national networks can be given.

Japan regulations

Region selection

If you are using the computer in Japan, technical regulations described in the
Telecommunications Business Law require that you select the Japan country mode.
It is illegal to use the modem in Japan with any other selection.

Redial

Up to two redial attempts can be made. If more than two redial attempts are made,
the modem will return Black Listed. If you are experiencing problems with the
Black Listed code, set the interval between redials at one minute or longer.

Japan’s Telecommunications Business Law permits up to two redials on analogue
telephones, but the redials must be made within a total of three minutes.

The internal modem is approved by Japan Approvals Institute for Telecommunications
Equipment.

A00-0940JP

Pursuant to FCC CFR 47, Part 68:

When you are ready to install or use the modem, call your local telephone company
and give them the following information:

◆ The telephone number of the line to which you will connect the modem

◆ The registration number that is located on the device

The FCC registration number of the modem will be found on either the device which
is to be installed, or, if already installed, on the bottom of the computer outside of
the main system label.

◆ The Ringer Equivalence Number (REN) of the modem, which can vary. For the

REN of your modem, refer to your computer’s user’s guide.

The modem connects to the telephone line by means of a standard jack called the
USOC RJ11C.

Type of service

Your modem is designed to be used on standard-device telephone lines. Connec­tion to telephone company-provided coin service (central office implemented
systems) is prohibited. Connection to party lines service is subject to state tariffs. If
you have any questions about your telephone line, such as how many pieces of
equipment you can connect to it, the telephone company will provide this informa­tion upon request.

Telephone company procedures

The goal of the telephone company is to provide you with the best service it can. In
order to do this, it may occasionally be necessary for them to make changes in their
equipment, operations, or procedures. If these changes might affect your service or
the operation of your equipment, the telephone company will give you notice in
writing to allow you to make any changes necessary to maintain uninterrupted
service.

If problems arise

If any of your telephone equipment is not operating properly, you should immedi­ately remove it from your telephone line, as it may cause harm to the telephone
network. If the telephone company notes a problem, they may temporarily discon­tinue service. When practical, they will notify you in advance of this disconnection.
If advance notice is not feasible, you will be notified as soon as possible. When
you are notified, you will be given the opportunity to correct the problem and
informed of your right to file a complaint with the FCC. In the event repairs are ever
needed on your modem, they should be performed by TOSHIBA Corporation or an
authorized representative of TOSHIBA Corporation.

Disconnection

If you should ever decide to permanently disconnect your modem from its present
line, please call the telephone company and let them know of this change.

Fax branding

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person
to use a computer or other electronic device to send any message via a telephone
fax machine unless such message clearly contains in a margin at the top or bottom
of each transmitted page or on the first page of the transmission, the date and time it
is sent and an identification of the business, other entity or individual sending the
message and the telephone number of the sending machine or such business, other
entity or individual. In order to program this information into your fax modem, you
should complete the setup of your fax software before sending messages.

Instructions for IC CS-03 certified equipment

1 NOTICE: The Industry Canada label identifies certified equipment. This certifica-

tion means that the equipment meets certain telecommunications network
protective, operational and safety requirements as prescribed in the appropriate
Terminal Equipment Technical Requirements document(s). The Department does
not guarantee the equipment will operate to the user’s satisfaction.

Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection.

The customer should be aware that compliance with the above conditions may
not prevent degradation of service in some situations. Repairs to certified
equipment should be coordinated by a representative designated by the
supplier. Any repairs or alterations made by the user to this equipment, or
equipment malfunctions, may give the telecommunications company cause to
request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connec­tions of the power utility, telephone lines and internal metallic water pipe system,
if present, are connected together. This precaution may be particularly important
in rural areas.

CAUTION: Users should not attempt to make such connections them­selves, but should contact the appropriate electric inspection authority,

or electrician, as appropriate.

2 The user manual of analog equipment must contain the equipment’s Ringer

Equivalence Number (REN) and an explanation notice similar to the following:
The Ringer Equivalence Number (REN) of the modem, which can vary. For the

REN of your modem, refer to your computer’s user’s guide.

NOTICE: The Ringer Equivalence Number (REN) assigned to each
terminal device provides an indication of the maximum number of terminals
allowed to be connected to a telephone interface. The termination on an
interface may consist of any combination of devices subject only to the
requirement that the sum of the Ringer Equivalence Numbers of all the
devices does not exceed 5.

3 The standard connecting arrangement (telephone jack type) for this equipment is

jack type(s): USOC RJ11C.
The IC registration number of the modem is shown below.

Canada: 1353 11026A

Notes for Users in Australia and New Zealand

Modem warning notice for Australia

Modems connected to the Australian telecoms network must have a valid Austel
permit. This modem has been designed to specifically configure to ensure compli­ance with Austel standards when the country/region selection is set to Australia.
The use of other country/region setting while the modem is attached to the
Australian PSTN would result in your modem being operated in a non-compliant
manner. To verify that the country/region is correctly set, enter the command ATI
which displays the currently active setting.

To set the country/region permanently to Australia, enter the following command
sequence:

A T%TE=1
ATS133=1
A T&F
A T&W
A T%TE=0
ATZ

Failure to set the modem to the Australia country/region setting as shown above
will result in the modem being operated in a non-compliant manner. Consequently,
there would be no permit in force for this equipment and the Telecoms Act 1991
prescribes a penalty of $12,000 for the connection of non-permitted equipment.

Notes for use of this device in New Zealand

◆ The grant of a Telepermit for a device in no way indicates Telecom acceptance

of responsibility for the correct operation of that device under all operating
conditions. In particular the higher speeds at which this modem is capable of
operating depend on a specific network implementation which is only one of
many ways of delivering high quality voice telephony to customers. Failure to
operate should not be reported as a fault to Telecom.

◆ In addition to satisfactory line conditions a modem can only work properly if:

a/ it is compatible with the modem at the other end of the call and
b/ the application using the modem is compatible with the application at the

other end of the call - e.g., accessing the Internet requires suitable
software in addition to a modem.

◆ This equipment shall not be used in any manner which could constitute a

nuisance to other Telecom customers.