TOSHIBA LT121DEE2P00 Specification

Page 1
Global LCD Panel Exchange Center
www.panelook.com
31cm COLOUR TFT-LCD MODULE
PRODUCT INFORMATION
FEATURES
(1) 12.1”XGA(1024x768 pixels) display size for notebook PC (2) Light weight, High Brightness(225cd/m2) design (3) LVDS interface system (H-Sync, V-Sync)
MECHANICAL SPECIFICATIONS
Item Specifications Dimensional Outline (typ.) 255.5(W) x 199.0 (H) x 4.8max(D) mm Number of Pixels 1024(W) x 768(H) pixels Active Area 245.76(W) x 184.32(H) mm Pixel Pitch 0.24(W) x 0.24(H) Weight (Typ) 156 g Backlight Single CCFL, Sidelight type
ABSOLUTE MAXIMUM RATINGS
Item Symbol Min. Max. Unit Checked Terminal Supply Voltage V Input Voltage of Signals V FL Driving Voltage V FL Driving Frequency f Operating Ambient Temperature T Operating Ambient Humidity H Storage Temperature T Storage Humidity H
DD
IN
FL
FL
OP
OP
STG
STG
Operating Temperature for Panel - 0 +60
-0.3 +4.0 V VDD - GND
-0.3 VDD+0.3 V LVDS interface
- 2.0 kV(rms)
- 100 kHz
0 +50
10 90 %(RH)
-20 +60 10 90 %(RH)
(12.1 TYPE)
LT121DEE2P00
(p-Si TFT)
TENTATIVE
4)
qC
qC
qC
ELECTRICAL SPECIFICATION
Item Symbol Min. Typ. Max. Unit Remark Supply Voltage V FL Input Current I FL Driving Voltage V
FL Driving Frequency f FL Starting Voltage V
DD
FL
FL
FL
SFL
3.0 3.3 3.6 V
3.0 5.5 6.0 mA(rms)
520 590 660 V(rms) IFL=5.5mA(rms)(Reference)
30 50 60 kHz
1180 - 1950 V(rms)
0qC
OPTICAL SPECIFICATION (Ta=25qC)
Item Min. Typ. Max. Unit Remarks Contrast Ratio (CR) 140 250 --- ---
(tON) --- --- 50 msResponse Time (t
) --- --- 50 ms
OFF
Luminance (L) 168 225 --- cd/m Viewing Angle U/D/R/L* 10/30/30/30 - - degree
*U: Upper side, D: Down side, R: Right side, L: Left side
*The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by Toshiba Mobile Display or other rights of the third parties which may result from its use. No license is granted by implication or
therwise under any patent or patent rights of Toshiba Mobile Display or others.
o *The information contained herein may be changed without prior notice. It is therefore advisable to contact Toshiba Mobile Display
before proceeding with the design of equipment incorporating this product.
2
IFL=5.5 mA(rms)
(1/10) 2010-02-17 (Ver.0.1)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 2
Global LCD Panel Exchange Center
DIMENSIONAL OUTLINE
www.panelook.com
TENTATIVE
LT121DEE2P00
Unit : mm Standard tolerance : r0.5
10) 2010-02-17 (Ver.0.1)
(2/
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 3
Global LCD Panel Exchange Center
BLOCK DIAGRAM
www.panelook.com
DC/DC
converter
Y-driver
Liquid Crystal Panel
LT121DEE2P00
X-driver
Y-driver
Gray scale
Manipulation Voltage Generation
CN1
Connector
Circuit
Panel
Controller
LVDS include
1, 1 2, 1 X2 1, 2
1024 x 768 pixels
Backlight
1024 pixels
, 1 X2n, 1 1024, 1
n-1
CN2
1, Y X
, Y X2n, Y
2n-1
1, 768 1024,768
10) 2010-02-17 (Ver.0.1)
(3/
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
768 pixels
www.panelook.com
Page 4
Global LCD Panel Exchange Center
TIMING CHART
www.panelook.com
LT121DEE2P00
(1) Vertical Timing
NCLK
DE
R7-R0 G7-G0 B7-B0
(2) Horizontal Timing
NCLK
DE
R7-R0 G7-G0 B7-B0
t1
t2
4
t
4
X
X
,
1
,
Y
X
,
1
t
2
,
X
2
3
,
4
X,Y
X,766
t
4
7
3,
Y
,
Y
4,Y
t5
Xn,Y
t
7
6
7
,
X
X,768
1
0
2
3
,
Y
Y
,
4
2
0
1
t
3
t
6
tvw
VSYNC
tvsu tvhd tvbp th
HSYNC
tv
p
ta tb
DE 767 768 1 2
th
1024
HSYNC
DE
Pixel Data
NCLK
thw
thfp twde thbp
12345
10) 2010-02-17 (Ver.0.1)
(4/
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 5
Global LCD Panel Exchange Center
7
TIMING SPECIFICATION
Item Symbol min. typ. max. unit Frame Period t1 778 x t4 806 x t4 860 x t4 ­Frame Frequency 1/t1 40 60 Hz Vertical Display Term t2 768 x t4 768 x t4 768 x t4 ­Vertical Blanking Term t3 10 x t4 38 x t4 92 x t4 ­1 Line Scanning Time t4 1319 x t7 1344 x t7 1600 x t7 -
Horizontal Display Term t5 1024 x t7 1024 x t7 1024 x t7 ­Horizontal Blanking Term t6 295 x t7 320 x t7 576 x t7 ­Clock Period t7 15 15.38 - ns Clock Frequency 1/T7 - 65 66.6 V-Sync Pulse Width tvw 2 x t4 - 7 x t4 ­V-Sync Set up Time tvsu 8 x t7 - - ­V-Sync Hold Time tvhd Vertical Front Porch tvfp 2 x t4 - - ­Vertical Back Porch tvbp 6 x t4 - - - Horizontal Period th 1319 x t7 - 1600 x t7 -
H-Sync Pulse Width th w 8 x t7 - - ­Horizontal Front Porch th fp 4 x t7 ­Horizontal Back Porch thbp 8 x t7 ­thw+thbp DE Pulse Width tw de 1024 x t7 1024 x t7 1024 x t7 ­t3 = tvfp + tvw + tvbp t4 = th t6 = thfp + thw + thbp
Note 1) Refer to “TIA/EIA Timing Chart”
www.panelook.com
- 20.68 - us
hbp+16 x t
20.04 - -
16 X t7 -
--
㪌㪇㪇㩷㫏㩷㫋㪎 㪋㪐㪉㩷㫏㩷㫋㪎
㪌㪇㪇㩷㪯㩷㫋㪎
-
㫌㫊
-
-
-
LT121DEE2P00
Note 2) If ENAB is fixed to "H" or "L" level for certain period while NCLK is supplied, the panel displays black with some
flicker.
Note 3) If NCLK is fixed to "H" or "L" level for certain period while ENAB is supplied, the panel may be damaged.
Note 4) Please adjust LCD operating signal timing and FL driving frequency, to optimize the display quality.
There is a possibility that flicker is observed by the interference of LCD operating signal timing and FL driving
condition (especially driving frequency), even if the condition satisfies above timing specifications and
recommended operating conditions shown in 3.
Note5 ) Do not make tv, tvdh and tvds fluctuate.
If tv, tvdh, and tvds are fluctuate, the panel displays black.
Note6) In case of using the long frame period, the deterioration of display quality, noise etc. may be occurred.
Note7) NCLK count of each Horizontal Scanning Time should be always the same.
V-Blanking period should be “n” X “Horizontal Scanning Time”. (n: integer)
Frame period should be always the same.
10) 2010-02-17 (Ver.0.1)
(5/
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 6
Global LCD Panel Exchange Center
CONNECTOR PIN ASSIGNMENT FOR INTERFACE
CN1 INPUT SIGNAL
Connector : 20347-030E-02 / I-PEX)
[ Mating Connector : Wire Type 20345-030T]
Terminal No. Symbol Function
1NC NC 2NC NC 3NC NC 4NC NC 5NC NC 6NC NC 7NC NC 8 V
9 V 10 V 11 V 12 V 13 V 14 NC NC 15 NC NC 16 NC NC 17 NC NC 18 NC NC 19 NC NC 20 V 21 V 22 RxIN0- Negative LVDS differential data input , [R0-R5, G0] 23 RxIN0+ Positive LVDS differential data input , [R0-R5, G0] 24 RxIN1- Negative LVDS differential data input , [G1-G5, B0-B1] 25 RxIN1+ Positive LVDS differential data input , [G1-G5, B0-B1] 26 RxIN2- Negative LVDS differential data input , [B2-B5, HS, VS, DE] 27 RxIN2+ Positive LVDS differential data input , [B2-B5, HS, VS, DE] 28 RxCLKIN- Negative LVDS differential clock input 29 RxCLKIN+ Positive LVDS differential clock input 30 V
Note 1) Please connect NC pin to nothing. Don’t connect it to grand nor to other signal input.
Please connect GND to ground. Don’t use it as no-connect nor connection with high impedance.
DD
DD
DD
DD
SS
SS
SS
SS
SS
www.panelook.com
LT121DEE2P00
POWER SUPPLY : +3.3V POWER SUPPLY : +3.3V POWER SUPPLY : +3.3V POWER SUPPLY : +3.3V GND GND
GND GND
GND
CN2 CCFL POWER SOURCE
Connector : BHSR-02VS-1/JAPAN SOLDERLESS TERMINAL MFG CO., LTD.
[ Mating Connector : SM02B-BHS-1/JAPAN SOLDERLESS TERMINAL MFG CO., LTD. ]
Terminal No. Symbol Function
1 V 2 V
FLH
FLL
CCFL POWER SUPPLY (HIGH VOLTAGE) CCFL POWER SUPPLY (LOW VOLTAGE)
10) 2010-02-17 (Ver.0.1)
(6/
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 7
Global LCD Panel Exchange Center
RECOMMENDED TRANSMITTER (THC63LVDF63A,THC63LVDM63A,THC63LVDM63A-85) TO LT121DEE2P00 INTERFACE ASSIGNMENT
Case1: 6bit Transmitter
www.panelook.com
LT121DEE2P00
THC63LVDF63A,THC63LVDM63A,THC63LVDM63A-85
Input Terminal No.
Symbol Terminal Symbol Function
TIN0 44 R0 Red Pixels Display Data (LSB) TIN1 45 R1 Red Pixels Display Data TIN2 47 R2 Red Pixels Display Data TIN3 48 R3 Red Pixels Display Data TIN4 1 R4 Red Pixels Display Data TIN5 3 R5 Red Pixels Display Data (MSB) TIN6 4 G0 Green Pixels Display Data (LSB) TIN7 6 G1 Green Pixels Display Data TIN8 7 G2 Green Pixels Display Data TIN9 9 G3 Green Pixels Display Data TIN10 10 G4 Green Pixels Display Data TIN11 12 G5 Green Pixels Display Data (MSB) TIN12 13 B0 Blue Pixels Display Data (LSB) TIN13 15 B1 Blue Pixels Display Data TIN14 16 B2 Blue Pixels Display Data TIN15 18 B3 Blue Pixels Display Data TIN16 19 B4 Blue Pixels Display Data TIN17 20 B5 Blue Pixels Display Data (MSB) TIN18 22 HSYNC H-Sync TIN19 23 VSYNC V-Sync TIN20 25 DE Compound Synchronization Signal
CLK IN 26 CLK Data Sampling Clock
Note 1) Please connect NC pin to nothing. Don't connect it to ground nor to other signal input.
(Graphics controller output signal)
Input Signal
Output
Signal
Symbol
TOUT0-
TOUT0+
TOUT1-
TOUT1+
TOUT2-
TOUT2+
TCLK OUT-
TCLK OUT+
LT121DEE2P00
Interface
(CN1)
Terminal Symbol
No.22 No.23
No.24 No.25
No.26 No.27
No.28 No.29
IN0-
IN0+
IN1-
IN1+
IN2-
IN2+
CLK-
CLK+
IN 0
IN 1
IN 2
TIN6
G0
TIN13
B1
TIN20
DE
TIN5
R5
T IN 1 2 T IN 1 1 T IN 1 0 T IN 9 T IN 8
B0
T IN19 T IN18 T IN17 T IN16 T IN15
VSYNC
TIN4 TIN3 TIN2 TIN1 TIN0
R4
G5
HSYNC
R3 R2 R1 R0
G4
B5
10) 2010-02-17 (Ver.0.1)
(7/
G3
B4
G2
TIN7
G1
TIN14
B2B3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 8
Global LCD Panel Exchange Center
RECOMMENDED TRANSMITTER (THC63LVDF63A,THC63LVDM63A,THC63LVDM63A-85) TO LT121DEE2P00 INTERFACE ASSIGNMENT
Case2: 8bit Transmitter
www.panelook.com
LT121DEE2P00
THC63LVDF63A,THC63LVDM63A,THC63LVDM63A-85
Input Terminal No.
(Graphics controller output signal)
Input Signal
Symbol Terminal Symbol Function
TIN0 51 R0 Red Pixels Display Data (LSB) TIN1 52 R1 Red Pixels Display Data TIN2 54 R2 Red Pixels Display Data TIN3 55 R3 Red Pixels Display Data TIN4 56 R4 Red Pixels Display Data TIN6 3 R5 Red Pixels Display Data (MSB) TIN7 4 G0 Green Pixels Display Data(LSB) TIN8 6 G1 Green Pixels Display Data TIN9 7 G2 Green Pixels Display Data TIN12 11 G3 Green Pixels Display Data TIN13 12 G4 Green Pixels Display Data TIN14 14 G5 Green Pixels Display Data(MSB) TIN15 15 B0 Blue Pixels Display Data (LSB) TIN18 19 B1 Blue Pixels Display Data TIN19 20 B2 Blue Pixels Display Data TIN20 22 B3 Blue Pixels Display Data TIN21 23 B4 Blue Pixels Display Data TIN22 24 B5 Blue Pixels Display Data (MSB) TIN24 27 HSYNC H-Sync TIN25 28 VSYNC V-Sync TIN26 30 DE Compound Synchronization Signal TIN27 50 NC Non Connection (open) TIN5 2 NC Non Connection (open) TIN10 8 NC Non Connection (open) TIN11 10 NC Non Connection (open) TIN16 16 NC Non Connection (open) TIN17 18 NC Non Connection (open) TIN23 25 NC Non Connection (open)
CLK IN 31 CLK Data Sampling Clock
Note 1) Please connect NC pin to nothing. Don't connect it to ground nor to other signal input.
Output
Signal
Symbol
TOUT0-
TOUT0+
TOUT1-
TOUT1+
TOUT2-
TOUT2+
TOUT3-
TOUT3+
TCLK OUT-
TCLK OUT+
LT121DEE2P00
Interface
(CN1)
Terminal Symbol
No.22 No.23
No.24 No.25
No.26 No.27
No.28 No.29
IN0-
IN0+
IN1-
IN1+
IN2-
IN2+
CLK-
CLK+
IN 0
IN 1
IN 2
IN 3
TIN7
G0
TIN18
B1
TIN26
DE
TIN23
NC
TIN6 TIN4 TIN3 TIN2 TIN1 TIN0
R5
T IN15 T IN14 T IN13 T IN12 T IN9
B0
TIN25 TIN24
VSYNC
T IN17 T IN16 T IN11 T IN10 T IN5
NC
R4
G5
HSYNC
NC
R3 R2 R1 R0
TIN8
G4
TIN22 TIN21 TIN20
B5
NC
10) 2010-02-17 (Ver.0.1)
(8/
G3
B4
NC
G2
TIN19
TIN27
NC
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
G1
B2B3
NC
www.panelook.com
Page 9
Global LCD Panel Exchange Center
256k (k=1024) COLORS COMBINATION TABLE
www.panelook.com
LT121DEE2P00
Basic Color
Gray
Scale of
Red
Gray
Scale of
Green
Gray
Scale of
Blue
Gray Scale of White &
Black
Display
Black
Blue
Green
Light Blue
Red Purple Yellow
White Black
Dark
n p
Light
Red
Black
Dark
n p
Light
Green
Black
Dark
n p
Light
Blue
Black
Dark
n p
Light
White
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
L L L L L L L L L L L L L L L L L L ­ L L L L L L L L L L L L H H H H H H ­ L L L L L L H H H H H H L L L L L L ­ L L L L L L H H H H H H H H H H H H ­ H H H H H H L L L L L L L L L L L L ­ H H H H H H L L L L L L H H H H H H ­ H H H H H H H H H H H H L L L L L L ­ H H H H H H H H H H H H H H H H H H ­ L L L L L L L L L L L L L L L L L L L 0 L L L L L H L L L L L L L L L L L L L 1
L L L L H L L L L L L L L L L L L L L 2
: :
H H H H L H L L L L L L L L L L L L L61 H H H H H L L L L L L L L L L L L L L62 H H H H H H L L L L L L L L L L L L Red L63
L L L L L L L L L L L L L L L L L L L 0 L L L L L L L L L L L H L L L L L L L 1
L L L L L L L L L L H L L L L L L L L 2
: :
L L L L L L H H H H L H L L L L L L L61 L L L L L L H H H H H L L L L L L L L62 L L L L L L H H H H H H L L L L L L Green L63
L L L L L L L L L L L L L L L L L L L 0 L L L L L L L L L L L L L L L L L H L 1
L L L L L L L L L L L L L L L L H L L 2
: :
L L L L L L L L L L L L H H H H L H L61 L L L L L L L L L L L L H H H H H L L62 L L L L L L L L L L L L H H H H H H Blue L63
L L L L L L L L L L L L L L L L L L L 0 L L L L L H L L L L L H L L L L L H L 1
L L L L H L L L L L H L L L L L H L L 2
: :
H H H H L H H H H H L H H H H H L H L61 H H H H H L H H H H H L H H H H H L L62 H H H H H H H H H H H H H H H H H H White L63
: :
: :
: :
: :
: :
: :
: :
: :
Gray Scale
Level
L3}
L60
L3}
L60
L3}
L60
L3}
L60
10) 2010-02-17 (Ver.0.1)
(9/
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 10
Global LCD Panel Exchange Center
!
FOR SAFETY
LCD module is generally designed with precise parts to achieve light weighted thin mechanical dimensions. In using our Modules, make certain that you fully understand and put into practice the warnings and safety precautions detailed in Engineering Information No.EE-D-001A,"CAUTIONS AND INSTRUCTIONS FOR TOSHIBA MOBILE DISPLAY LCD MODULES". Refer to individual specifications and TECHNICAL DATA sheets (hereinafter called "TD") for more detailed technical information.
1) SPECIAL PURPOSES
A) Toshiba Mobile Display's Standard LCD Modules have not been customized for operation in extreme environments or for use in applications where performance failures could be life-threatening or otherwise catastrophic.
B) Since Toshiba Mobile Display's Standard LCD Modules have not been designed for operation in extreme environments, they must never be used in devices that will be exposed to abnormally high levels of vibration or shock which exceed Toshiba Mobile Display's published specification limits.
www.panelook.com
LT121DEE2P00
C) In addition, since Toshiba Mobile Display’s Standard LCD Modules have not been designed for use in applications where performance failures could be life-threatening or catastrophic, they must never be installed in aircraft navigation control systems (such as, but not limited to Traffic Collision Avoidance System and Air Traffic Indicator), in military defense or weapons systems, in critical industrial process-control systems (e.g., those involved in the production of nuclear energy), or in critical medical device or patient life-support systems.
2) DISASSEMBLING OR MODIFICATION
DO NOT DISASSEMBLE OR MODIFY the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. Toshiba Mobile Display doses not warrant the module, if customer disassembled or modified it.
3) BREAKAGE OF LCD PANEL
DO NOT INGEST liquid crystal material, DO NOT INHALE this material, and DO NOT CONTACT the material with skin, if LCD panel is broken and liquid crystal material spills out. If liquid crystal material comes into mouth or eyes, rinse mouth or eyes out with water immediately. If this material contact with skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water.
4) GLASS OF LCD PANEL
BE CAREFUL WITH CHIPS OF GLASS that may cause injuring fingers or skin, when the glass is broken.
5) ELECTRIC SHOCK
DISCONNECT POWER SUPPLY before handling LCD module. DO NOT TOUCH the parts inside LCD module and the fluorescent lamp's connector or cables in order to prevent electric shock, because high voltage is supplied to these parts from the inverter unit while power supply is turned on.
6) ABSOLUTE MAXIMUM RATINGS AND POWER PROTECTION CIRCUIT
DO NOT EXCEED the absolute maximum rating values under the worst probable conditions caused by the supply voltage variation, input voltage variation, variation in parts' constants, environmental temperature, etc., otherwise LCD module may be damaged. Employ protection circuit for power supply, whenever the specification or TD specifies it. Suitable protection circuit should be applied for each system design.
7) DISPOSAL
When dispose LCD module, obey to the applicable environmental regulations.
10) 2010-02-17 (Ver.0.1)
(10/
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...