Toshiba L3443-48, L3441-48 User Manual
ON-LINE MANUAL
48L344*DG
LED Backlight LCD Satellite TV
During the life of your TV rmware updates will be made available to
ensure that your TV maintains optimum performance.
You can download the latest version of rmware from
www.toshiba-om.net/rmware.php
Some features listed in this document are limited due to local legislation
and may not be available in all countries.
“Register your TV online at: www.toshiba-europe.com/registration”
Contents
Safety Precautions ................................................. 3
Air Circulation
Heat Damage...................................................... 3
Mains Supply ...................................................... 3
Warning ............................................................. 3
Do ....................................................................... 3
Do not ................................................................. 3
Installation and Important Information
Exclusion Clause
Important safety information
The Remote Control
Inserting Batteries and Effective Range of the
Remote Control................................................... 7
Connecting External Equipment
Connecting an HDMI
Input........................................................................ 9
To Connect an HDMI Device
To Connect a DVI Device.................................... 9
Connecting a Computer........................................ 10
To Connect a Computer
Connecting a DVD Player..................................... 10
Connecting to a DVD Player via YPbPr
Connecting a USB Memory
To Connect a USB Flash Drive
Connecting a home network
Environmental Information
Controlling the TV
Switching on
Using the Remote Control ................................ 13
Using the Controls on the TV ............................ 13
Auto Tuning....................................................... 16
Digital Aerial Manual Search............................. 17
Digital Cable Manual Search ............................ 17
Analogue Manual Search ................................. 17
Digital Satellite Manual Search ......................... 17
Analogue Fine Tune.......................................... 18
Clear Service List (*)
Stereo and Bilingual Transmissions.................. 19
Displaying Subtitles
Viewing Main Menu .......................................... 19
Controlling Volume and Muting Sound ............. 19
Selecting Programme Positions........................ 19
Standby Notications ........................................ 19
Viewing Channel List ........................................ 20
Moving a Channel ............................................. 20
Deleting a Channel ........................................... 20
Renaming a Channel
Locking a Channel
Viewing Info Banner .......................................... 21
Electronic Programme Guide............................ 21
Language Settings ............................................ 22
Viewing Parental Control Menu
Menu Lock
Maturity Lock (*)................................................ 23
..................................................... 3
.................... 4
................................................ 4
................................................. 13
..................................................... 13
........................................................ 23
.................................. 5
............................................... 7
®
or DVI Device to the HDMI
......................................... 18
.......................................... 19
............................................ 20
............................. 8
.............................. 9
.................................... 10
............ 10
.................................. 10
......................... 10
..................................11
............................... 12
........................................ 20
........................ 23
English - 1 -
Child Lock
Set PIN
Conguring Picture Settings
Mode
Contrast
Brightness ......................................................... 24
Sharpness......................................................... 24
Colour ............................................................... 24
Power Save Mode
Backlight
Noise Reduction ............................................... 24
Reset ................................................................ 25
PC Picture Settings (*) ...................................... 27
PC Position
Autoposition
H Position ......................................................... 27
V Position.......................................................... 27
Dot Clock .......................................................... 27
Phase................................................................ 27
Conguring Sound Settings .............................. 28
Operating Sound Settings Menu Items ............. 28
Volume .............................................................. 28
Equalizer (Only for speaker) ............................. 28
Balance (Only for speaker)
Headphone
Sound Mode ..................................................... 28
AVL ................................................................... 28
Headphone/Lineout .......................................... 28
Dynamic Bass
Surround Sound................................................ 28
Digital Out
Conguring Your TV’s Settings ......................... 29
Viewing Settings Menu ..................................... 29
Conditional Access
Language
Parental ............................................................ 29
Timers ............................................................... 29
Date/Time ......................................................... 29
Sources............................................................. 29
Network Settings............................................... 29
Satellite Settings .............................................. 29
Other Settings ................................................... 29
Using a Conditional Access Module ................. 29
Timers
Setting Sleep Timer
Setting Programme Timers ............................... 30
Conguring Date/Time Settings ........................ 30
Conguring Source Settings ............................. 31
Input Selection
Conguring Satellite Settings............................ 31
Conguring Other Settings - General
Operation .......................................................... 32
Menu Timeout ................................................... 32
Scan Encrypted Channels
Blue Background
......................................................... 23
............................................................. 23
............................. 24
................................................................. 24
............................................................ 24
............................................ 24
........................................................... 24
....................................................... 27
...................................................... 27
............................... 28
....................................................... 28
................................................... 28
......................................................... 28
........................................... 29
.......................................................... 29
............................................................... 30
.......................................... 30
.................................................. 31
............... 32
............................... 32
.............................................. 32
English
Software Upgrade ............................................. 32
Application Version ........................................... 32
Hard of Hearing
English
Audio Description.............................................. 32
................................................ 32
Auto TV Off ....................................................... 33
Store Mode
....................................................... 33
MEDIA Renderer............................................... 33
Power Up Mode
Bisskey
................................................ 33
............................................................ 33
CEC .................................................................. 33
CEC Auto Power On ......................................... 33
Conguring Network Settings
........................... 34
First enter to Toshiba Portal .............................. 34
Using the Toshiba Portal
Using the Internet Browser ............................... 34
Using YouTube
Manual Start
TM
..................................................... 36
................................... 34
............................................. 35
Auto Start .......................................................... 36
Playing MP3 Files
............................................. 37
Viewing JPEG Files .......................................... 37
Slideshow Feature ............................................ 38
Video Playback
................................................. 38
Media Browser Settings .................................... 39
Using MENU button in Media Browser Mode
To Close the Media Player ................................ 39
Using Text Button -TEXT .................................. 40
Accessing Sub-pages
....................................... 40
Revealing Concealed Text ................................ 40
Holding a Page
................................................. 40
To display an initial page................................... 40
Appendix A: PC Input Typical Display Modes
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types)
Appendix C: PIN Information
Specications and Accessories
License Information
Q & A Section
.............................................. 42
............................... 43
............................ 45
.............................................. 46
....................................................... 47
... 39
....... 41
English - 2 -
Safety Precautions
This equipment has been designed and manufactured to meet international safety standards but, like any
electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read
the points below for your own safety. They are of a general nature, intended to help with all electronic consumer
products and some points may not apply to the goods you have just purchased.
English
Air Circulation
Leave more than 10cm around all edges when wall
mounting the television to allow adequate ventilation.
This will prevent overheating and possible damage to
the television. Dusty places should also be avoided.
Heat Damage
Damage may occur if the television is left in direct
sunlight or near a heater. Avoid places subject to
extremely high temperatures or humidity, or locations
where the temperature is likely to fall below 5°C
(41°F).
Mains Supply
The set should be operated only from a 220-240 V
AC 50 Hz outlet. DO ensure that the television is not
standing on the mains lead. DO NOT cut off the mains
plug from this equipment, this incorporates a special
Radio Interference Filter, the removal of which will
impair its performance. It should only be replaced by
a correctly rated and approved type. IF IN DOUBT
PLEASE CONSULT A COMPETENT ELECTRICIAN.
Warning
To prevent the spread of re, keep candles or other
open ames away from this product at all times.
Do
DO read these operating instructions before you
attempt to use the equipment.
DO ensure that all electrical connections (including
the mains plug, extension leads and inter connections
between pieces of equipment) are properly made and
in accordance with the manufacturers’ instructions.
Switch off and withdraw the mains plug before making
or changing connections.
DO consult your dealer if you are ever in doubt about
the installation, operation or safety of your equipment.
DO be careful with any glass panels or doors on
equipment.
Do not
DON’T remove any xed cover as this may expose
dangerous voltages.
DON’T obstruct the ventilation openings of the
equipment with items such as newspapers, tablecloths,
curtains, etc. Overheating will cause damage and
shorten the life of the equipment.
DON’T allow electrical equipment to be exposed to
dripping or splashing or objects lled with liquids, such
as vases, to be placed on the equipment.
DON’T place hot objects or naked ame sources,
such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and
lead to res.
DON’T use makeshift stands and NEVER x with
wood screws. Use the stand manufacturers supplied
screws.
DON’T leave equipment switched on when it is
unattended, unless it is specically stated that it is
designed for unattended operation or has a standby
mode. Switch off by withdrawing the plug, make sure
your family know how to do this. Special arrangements
may need to be made for people with disabilities.
DON’T continue to operate the equipment if you are in
any doubt about it working normally, or it is damaged
in any way - switch off, withdraw the mains plug and
consult your dealer.
WARNING - excessive sound pressure from
earphones or headphones can cause hearing loss.
ABOVE ALL - NEVER let anyone, especially
children, push or hit the screen, push anything
into holes, slots or any other openings in the case.
NEVER guess or take chances with electrical
equipment of any kind - it is better to be safe
than sorry.
THE MAINS PLUG IS USED AS A DISCONNECTING
DEVICE AND THEREFORE SHOULD BE READIL Y
OPERABLE.
Note : Interactive video games that involve shooting
a “gun” type of joystick at the on-screen target may
not work with this TV.
English - 3 -
Installation and Important Information
English
Where to install
* Button and stand style
is dependent on model.
Locate the television away from direct sunlight and strong
lights. Soft, indirect lighting is recommended for comfortable
viewing. Use curtains or blinds to prevent direct sunlight
falling on the screen.
Place the TV on a stable, level surface that can support the
weight of the TV. In order to maintain stability and prevent
it falling over, it is recommended to secure the TV to a wall
using a sturdy tie on the back of the stand.
The LCD display panels are manufactured using an extremely
high level of precision technology; however, sometimes some
parts of the screen may be missing picture elements or have
luminous spots. This is not a sign of a malfunction.
Make sure the television is located in a position where it
cannot be pushed or hit by objects, as pressure will break
or damage the screen. Also, please ensure that small items are
not inserted into slots or openings in the case.
Avoid using chemicals (such as air refreshers, cleaning
agents, etc.) on or near the TV pedestal. Studies
indicate that plastics may weaken and crack over time
from the combination effects of chemical agents and mechanical
stress (such as weight of TV). Failure to follow these instructions
could result in serious injury and/or permanent damage to TV
and TV pedestal.
Cleaning the screen and cabinet…
Turn off the power, and clean the screen and cabinet with a soft,
dry cloth. We recommend that you do not use any proprietary
polishes or solvents on the screen or cabinet as this may
cause damage.
Please take note
The digital reception function of this television is only effective in the countries listed in the “Country” section
during the rst time installation menu. Depending on country/area, some of this television’s functions may not
be available. Reception of future additional or modied services cannot be guaranteed with this television.
If stationary images generated by 4:3 broadcasts, text services, channel identication logos, computer displays,
video games, on screen menus, etc. are left on the television screen for any length of time, they could become
conspicuous. It is always advisable to reduce both the brightness and contrast settings.
Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at
the 4:3 outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty.
Regular use of other size modes will prevent permanent retention.
Exclusion Clause
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) re;
ii) earthquake;
iii) accidental damage;
iv) intentional misuse of the product;
v) use of the product in improper conditions;
vi) loss and/or damage caused to the product whilst in the possession of a third party;
vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the
owner’s manual;
viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with
associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not
limited to the following, loss of prot, interruption of business, the loss of recorded data whether caused during normal
operation or misuse of the product.
English - 4 -
Important safety information
• Any function related to the digital television (with the DVB logo) is available only within the country or area
where such signals are transmitted. Verify with the salesperson if it is possible to receive a DVB - T/C/S
signal in the area where you live.
• Even if the television conforms to the required DVB - T/C/S specications, the compatibility with future digital
DVB - T/C/S transmissions is not guaranteed.
• Some digital television functions may not be available in certain countries.
• The DVB - T/C/S system present in this device, allows reception of both FTA (Free To Air) and Encrypted
channels.
Note; Encrypted channels require a specic encryption system to view, which may not be available in certain
countries.
• DVB is a registered trademark of the DVB Project. This logo indicates that the product is compliant with
European Digital Broadcasting.
IMPORTANT INFORMATION
TV Installation
• Do not stand the televisions on cloth or other materials placed between the television and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television or its controls.
• Always hold the plug when disconnecting the unit from the socket outlet. Do not pull on ex. The ex can
become damaged and cause a short circuit.
• Use a soft, dry cloth to clean the unit.
• Set up unit so that no one will trip over the ex.
• If you intend to wall mount the unit, contact the shop where you purchased the unit for advice, and leave the
installation work to professionals. Improper installation can cause damage and/or injuries.
• To protect the unit during a thunder storm, unplug the AC power cord and disconnect the aerial, cable and
satellite decoder/systems etc.
Caution: Do not touch the aerial and or satellite connector.
• The unit becomes warm when in operation. Do not place any covers or blankets on the unit in order to
prevent overheating.
The ventilation holes should not be blocked. Do not set up near radiators. Do not place in direct sunshine.
• Moisture condensation occurs in the following situations:
- When you move the unit from a cold place to a warm place.
- When you use the unit in a room where the heater was just turned on.
- When you use the unit in an area where cold air from an air conditioner directly hits the unit.
- When you use the unit in a humid place.
• Never use the unit when moisture condensation could occur.
• Using the unit when moisture condensation exists may damage its own internal parts. After two or three
hours, the unit will warm up and moisture will be evaporated.
English
English - 5 -
Removing the pedestal stand
When using a Wall Bracket
English
Please use a wall bracket appropriate for the size and weight of the LCD TV
• Two people are required for installation.
• To install a wall-mount.
(1) Unplug and remove any cables and/or other component connectors from the rear of the TV
(2) Carefully lay the front of the unit face down on a at, cushioned surface such as a quilt or blanket.
(3) Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate
bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the
wall bracket.
(4) Always use the screws supplied or recommended by the wall mount manufacturer.
Removing the pedestal stand
(1) Carefully lay the front of the unit face down on a at, cushioned surface with the stand hanging over the edge.
(2) Remove the screws.
(3) After the screws are removed, hold the pedestal stand in place,then remove the pedestal stand and the
plastic moulding from the TV by removing away from the TV.
NOTE: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD
panel.
.
.
For 48L344*DG models
English - 6 -
The Remote Control
Simple at-a-glance reference of your remote control.
English
1. Standby
2. Numeric buttons
3. TV-AV / Channel list /
Switches among broadcast
types
4. Mute
5. Volume Up / Down
6. Menu on-off
7. Navigation buttons
(Up/Down/Left/Right)
8. Okay (Conrm) / Hold (in
TXT mode) / Channel List
9. Return / Index page (in
TXT mode)
10. Media Browser
11. Quick Menu
12. My button 1 (*)
13. Coloured buttons
14. Mono/Stereo - Dual I-II /
Current Language
(in DVB channels)
15. Rapid reverse
16. No function
(*) MY BUTTON 1 & MY BUTTON 2
These buttons may have default functions depending on the model.
However you can set a special function to these buttons by pressing
on them for ve seconds when on a desired source, channel or link. A
conrmation message will be displayed on the screen. Now the selected
MY BUTTON is associated with the selected function.
Note that if you perform rst time installation, MY BUTTON 1&2 will return
to their default function.
17. Pause
18. Play
19. Subtitle on-off (in Media
Browser mode and in DVB
channels)
20. Stop
21. Rapid advance
22. Image size
23. My button 2 (*)
24. Teletext / Mix (in TXT
mode)
25. Electronic programme
guide(in DVB channels)
26. Exit
27. Internet portal
28. Info / Reveal (in TXT
mode)
29. Programme Down /
Page up -
Programme Up / Page
down
30. Previous programme
31. AV / Source selection
Inserting Batteries and Effective Range of the Remote Control
Remove the back cover to reveal the battery compartment and make sure the
batteries are inserted the right way round. Suitable battery types for this remote
are AAA, IEC R03 1.5V.
Do not combine a used, old battery with a new one or mix battery types. Remove
exhausted batteries immediately to prevent acid from leaking into the battery
compartment. Dispose of them in a designated disposal area.
Warning: Batteries must not be exposed to excessive heat such as sunshine,
re or the like.
The performance of the remote control will deteriorate beyond a distance of ve
metres or outside an angle of 30 degrees from the IR receiver. If the operating
range becomes reduced the batteries may need replacing.
English - 7 -
English
Connecting External Equipment
Before connecting any external equipment, remove the mains plug from the wall socket.
(*) Number of these inputs may change according to the model of your TV.
(**) Your TV may not be supported depending on the model.
Aerial cable:.....................................................
Connect the aerial to the ANT. socket on the rear of
the TV.
Satellite cable:............................................(**)
Connect the LNB from the satellite dish to the Satellite
Antenna socket on the rear of the TV.
If your satellite connection is different, suitable
adaptors are available from most satellite equipment
retailers.
SCART lead:....................................................
If you use a decoder* or a media recorder, it is
essential that the scart cable is connected to the TV.
Before running rst time installation, any connected
devices need to be set to standby mode.
The DIGITAL AUDIO socket enables the connection
of a suitable surround sound system.
®
HDMI
(High-Denition Multimedia Interface) is for
using with a DVD decoder or other equipment with
digital audio and video output. It is designed for best
performance with 1080i and 1080p high-denition
video signals but will also accept and display VGA,
480i, 480p, 576i, 576p and 720p signals. PC format
signals will also be displayed.
English - 8 -
NOTE: Although this TV is able to connect to HDMI
equipment, it is possible that some equipment may
not operate correctly.
When connecting a device via the Side AV input, you
must use the supplied connection cable to enable
connection.
When connecting a device via YPbPr input, you
must use the supplied connection cable to enable
connection.
LAN Input is used to connect the TV to your home
network.
A wide variety of external equipment can be connected
to the TV; therefore, the relevant owner’s manuals
for all additional equipment must be referred to for
exact instructions.
If the TV automatically switches over to monitor
external equipment, return to normal TV by pressing
the desired programme position button. To recall
external equipment, press SOURCE button repeatedly
to switch between sources.
Regardless of source’s property, audio output from the
DIGITAL AUDIO socket cannot be copied.
Connecting an HDMI® or DVI Device to the HDMI Input
English
The HDMI inputs on your TV receive digital audio and
uncompressed digital video from an HDMI source
device or uncompressed digital video from a DVI
(Digital Visual Interface) source device.
These inputs are designed to accept HDCP (HighBandwidth Digital-Content Protection) programme
material in digital form from EIA/CEA-861-D–
compliant [1] consumer electronic devices (such as a
set-top box or DVD player with HDMI or DVI output).
NOTE:
• Some early HDMI equipment may not work properly
with your latest HDMI TV.
• Supported Audio format: Linear PCM, sampling rate
32/44.1/48kHz.
To Connect an HDMI Device
Connect an HDMI cable (type A connector) to
the HDMI terminal. For proper operation, it is
recommended that you use an HDMI cable with the
HDMI Logo (
• If your HDMI connection is capable of 1080p and/or
your TV is capable of refresh rates greater
than 50Hz, you will need a Category 2 cable.
Conventional HDMI/DVI cable may not work properly
with this mode.
• HDMI cable transfers both video and audio. Separate
analogue audio cables are not required (see
illustration).
• To view the HDMI device video press SOURCE
button to select the appropriate HDMI input.
).
To Connect a DVI Device
Connect an HDMI-to-DVI cable (HDMI type A
connector) to the HDMI input socket and audio cables
to the RED and WHITE SIDE AV AUDIO inputs on
the Audio/Video connection cable supplied (see
illustration).
• The maximum recommended HDMI-to-DVI cable
length is 6.6 ft (2m).
• An HDMI-to-DVI cable transfers video only. Separate
analogue audio cables are required.
* Number
of these
inputs
may
change
according
to the
model of
your TV.
* Number of
these inputs
may change
according to
the model of
your TV.
NOTE:
To ensure that the HDMI or DVI device is reset
properly, it is recommended that you follow these
procedures:
• When turning on your electronic components, turn
on the TV rst, and then the HDMI or DVI device.
• When turning off your electronic components, turn
off the HDMI or DVI device rst, and then the TV.
English - 9 -
Connecting a Computer Connecting a DVD Player
English
To Connect a Computer
With either an RGB/PC or an HDMI connection, you
can watch your computer’s display on the TV and hear
the sound from the TV’s speakers.
When connecting a PC to the RGB/PC input on TV,
use an analogue RGB (15-pin) computer cable and
use the SIDE AV socket with a PC audio cable (not
supplied) for audio connection, using the supplied
Side AV connection cable’s RED and WHITE inputs
(see illustration).
To use a PC, set the monitor output resolution on
the PC before connecting it to the TV. To display the
optimum picture, use the PC setting feature.
NOTE:
• Some PC models cannot be connected to this TV.
An adaptor is not needed for computers with a
compatible mini D-sub15-pin terminal.
• Depending on the DVD’s title and the specications
of the PC on which you are playing the DVD-Video,
some scenes may be skipped or you may not be
able to pause during multiangle scenes.
Connecting to a DVD Player via YPbPr
Some DVD players are connected through
COMPONENT SOCKETS (YPbPr). In this case,
you must use the supplied Component YPbPr video
connection cable for enabling connection. First, plug
the single jack of the cable to the TV’s YPbPr socket
(side). Afterwards, insert your YPbPr cable’s (not
supplied) connectors into the plural part of the supplied
YPbPr video connection cable (see illustration below).
Colours of the connected jacks should match.
To enable audio connection, use the supplied Side AV
connection cable. First, plug single jack of the cable
to the Side AV Input of the TV. Afterwards, insert your
DVD player’s audio cable’s connectors into the plural
part of the supplied Side AV connection cable (see
illustration below). Colours of the connected jacks
should match.
Connecting a USB Memory
To Connect a USB Flash Drive
• You can connect a USB Flash Drive to your TV by
using the USB inputs on the TV. This feature allows
you to display/play music, photo or video les stored
in a USB stick.
• It is possible that certain types of USB devices (e.g.
MP3 Players) may not be compatible with this TV.
• You may back up your les before making any
connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any le damage or data loss.
• Do not pull out USB module while playing a le.
CAUTION: Quickly plugging and unplugging USB
devices may cause damage to the USB device.
English - 10 -
Connecting a home network
English
The LAN port allows your TV to connect to your
home network. You can use this networking system
to access photo, video and audio les that are stored
on a media server and play/display them on your TV.
Wired connection
You need a LAN cable (not supplied) to connect your
TV to your modem/router.
Wireless connection for models without integrated
WIFI
You need to connect a USB LAN adaptor (sold
separately) to one of the USB inputs on your TV to
connect to your network wirelessly.
Note: Wireless USB LAN adaptor can be purchased
from the retail outlet or Toshiba service company. You
can nd the phone numbers of the local services on
the back cover of this manual.
Wireless connection for models with integrated
WIFI
IF your TV has a built-in WLAN system, you don’t
need additional devices to connect to your network
wirelessly.
Note: Performance depends on many factors,
conditions and variables, including distance from
acces point (AP), volume of network trafc, building
materials and construction, operating system used,
mix of wireless products used, interference and other
adverse conditions.
After connections are done, network congurations of
the TV should be set. Please refer to network setting
section on page 34.
English - 11 -
Power Save Mode
English
Environmental Information
This television is designed to be environment friendly. You not only help to save the environment but also
you can save money by reducing electricity bills thanks to the energy efciency feauture of this TV. To reduce
energy consumption, you should take the following steps:
You can use Power Save Mode setting, located in the Picture Settings menu. If you set Power Save Mode as
Eco, the TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum
level. Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode.
If pressed Right button, “Screen will be off in 15 seconds.” message will be displayed on the screen. Select
Proceed and press OK to turn the screen off immediately. If you don’t press any button, the screen will be off
in 15 seconds. Press any button on the remote or on the TV to turn the screen on again. If you disable Power
Save Mode, picture mode will be automatically set to Dynamic.
It is highly recommended to activate Power Save Mode to reduce your annual power consumption. And also
it is recommended to disconnect the TV from the mains plug to save more energy when you are not going to
use it for a long period of time.
Repair Information
Please refer all servicing to qualied personnel. Only qualied personnel must repair the TV. Please contact
your local dealer, where you have purchased this TV for further information.
English - 12 -
Controlling the TV
A wide variety of external equipment can be connected via the sockets located on the side and back of the
TV. Whilst all the necessary adjustments and controls for the TV are made using the remote control, the
buttons on the Back of the TV may be used for some functions.
English
Switching on
If the standby LED is unlit, check that the mains
plug is connected to the power and press the
button on the back side of the television to switch the
television on.
To put the television into Standby, press
the remote control or on the TV. To view the television,
press button again. The picture may take a few
seconds to appear.
Note: The active Standby LED colour will turn to red in a few
moments when the TV is switched into Standby.
/ I
button on
For energy saving:
Turning the TV off at its mains supply, or un-plugging
it, will cut energy use to nearly zero for all TV’s. This
is recommended when the TV is not being used for a
long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce
energy use. Energy efciency cuts energy consumption
and thus saves money.
NOTE: Putting the TV into standby mode, will reduce energy
consumption, but will still draw some power.
Using the Remote Control
Press the MENU button on the remote control to see
the menus.
The main menu appears as a group of icons each
for a menu option. Press the Left or Right button to
select a topic.
In sub menu screen mode the menu appears as a
list. Press the Up or Down button to select a topic.
To use the options press the Up and Down buttons
on the remote control to move up and down through
them and OK, Left or Right buttons to select the
required choice. Follow the on screen instructions.
The functions of each menu are described in detail
throughout the manual.
Using the Controls on the TV
Using the control buttons on the Back of the TV:
• To alter the volume press +
• To alter the programme position press
the Back of the TV.
• Press +
menu and use
change value.
To select an external input, press
appropriate input source is selected.
Please always refer to the owner’s manual of the
equipment to be connected for full details..
- buttons at the same to view main
P
to navigate and + - to
or - .
P
on
until the
English - 13 -
Initial Installation
Before switching on the TV, put your decoder and media recorder to Standby if they are connected and
English
ensure the aerial/cable and/or Satellite dish is connected to your TV. To set up the TV, use the buttons on
the remote control as detailed on page 7.
IMPORTANT: Ensure that the aerial/cable and/or
Satellite dish is connected and a Common Interface
module is not inserted before switching on the TV for
the rst time installation.
1. Connect the mains plug and switch the TV to on
on using the side control switch. If the TV does
not switch on, press any numbered or button
on the remote control, then the language selection
menu will be displayed. This screen will appear
the rst time that the TV is switched on and each
time the TV is reset.
2. By pressing Up or Down button, highlight the
language you want to set and press OK button.
The following message will be displayed next:
5. Press OK button on the remote control to continue
and the following message will be displayed on
the screen:
Select Store mode if the TV will be placed in a
store to exhibit. This option will congure your
TV’s settings for best display quality and the
supported features of the TV will be displayed on
the top of the screen as a info banner. If Store
mode is selected, a conrmation screen will be
displayed. Select YES to proceed. This option will
be available in Other Settings menu and can be
turned off/on later.
If Home Mode is selected, Store Mode will not
be available after the First Time Installation. For
home use select Home Mode.
6. Press OK button on the remote control to continue
and the following message will be displayed on
the screen:
7. Select Yes button by using Left or Right button
and press OK button to continue. Afterwards, the
following OSD will be displayed on the screen:
3. By pressing Left or Right button, select the
country you want to set and press Down button
to highlight the Search Type option. Use Left or
Right to set the desired search type. Available
search types are digital only, analog TV only
and full.
4. When set, Down button to select Teletext
Language. Use Left or Right button to select
desired Teletext Language.
English - 14 -
8. If you select Cable option, a conrmation screen
will be displayed. Select YES to proceed. The
following screen will be displayed:
Note: Although this cable feature can be selected,
it is not fully supported in the UK. If cable signals
are input to this TV from a Cable Network Provider
some may be displayed.
Loading...