Toshiba L30 User Manual

User’s Manual

L30

Choose freedom.

computers.toshiba-europe.com

Copyright

L30

© 2006 by TOSHIBA Corporation. All rights reserved. Under the copyright
laws, this manual cannot be reproduced in any form without the prior
written permission of TOSHIBA. No patent liability is assumed, with respect
to the use of the information contained herein.

L30 Portable Personal Computer User's Manual

First edition December 2006
Ownership and copyright of music, video, computer programs, databases,

etc. are protected by the copyright laws. These copyrighted materials may
be copied for private use at home only. If, beyond the limitation above, you
copy (including to transform data formats) or modify these materials,
transfer them or distribute them via the Internet without approval of
copyright owners, you may be subject to claims for compensation for
damage and/or criminal penalties due to infringements of copyrights or
personal rights. Please remember to observe the copyright laws when you
use this product to copy the copyrighted works or perform other actions.

Please note that you may infringe the owner's rights protected by the
copyright laws if you use the screen mode switching functions (e.g. Wide
mode, Wide Zoom mode, etc.) of this product to display enlarged
images/video at coffee shops or hotels for the purposes of profits or
providing these to the public.

This product incorporates copyright protection technology that is protected
by U.S. patents and other intellectual property rights. Use of this copyright
protection technology must be authorized by Macrovision, and is intended
for home and other limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly is prohibited.

Disclaimer

This manual has been validated and reviewed for accuracy. The
instructions and descriptions it contains are accurate for the L30 Portable
Personal Computer at the time of this manual’s production. However,
succeeding computers and manuals are subject to change without notice.
TOSHIBA assumes no liability for damages incurred directly or indirectly
from errors, omissions or discrepancies between the computer and the
manual.

User’s Manual ii

Trademarks

Intel, Centrino, Intel Core and Celeron are trademarks or registered
trademarks of Intel Corporation.

Windows and Microsoft are registered trademarks and Windows Vista is a
trademark of Microsoft Corporation.

Photo CD is a trademark of Eastman Kodak.
TruSurround XT, WOW XT, SRS and symbol are trademarks of SRS

Labs, Inc.
TruSurround XT, WOW XT, TruBass, SRS 3D and FOCUS technologies

are incorporated under license from SRS Labs, Inc.
DVD MovieFactory is a trademark of Ulead Systems, Inc.
Other trademarks and registered trademarks not listed above may be used

in this manual.

EU Declaration of Conformity

This product is carrying the CE-Mark in accordance with the related
European Directives. Responsible for CE-Marking is TOSHIBA Europe
GmbH, Hammfelddamm 8, 41460 Neuss, Germany.

The complete and official EU Declaration of Conformity can be found on
TOSHIBA’s web site http://epps.toshiba-teg.com on the Internet.

CE compliance

This product is labelled with the CE Mark in accordance with the related
European Directives, notably Electromagnetic Compatibility Directive
89/336/EEC for the notebook and the electronic accessories including the
supplied power adapter, the Radio Equipment and Telecommunications
Terminal Equipment Directive 1999/5/EC in case of implemented
telecommunication accessories and the Low Voltage Directive 73/23/EEC
for the supplied power adapter.

This product and the original options are designed to observe the related
EMC (Electromagnetic Compatibility) and safety standards. However,
TOSHIBA cannot guarantee that this product still observes these EMC
standards if options or cables not produced by TOSHIBA are connected or
implemented. In this case the persons who have connected / implemented
those options / cables have to provide assurance that the system (PC plus
options / cables) still fulfils the required standards. To avoid general EMC
problems, the following guidance should be noted:

■ Only CE marked options should be connected / implemented

■ Only best shielded cables should be connected

L30

User’s Manual iii

Working environment

This product was designed to fulfil the EMC (Electromagnetic Compatibility)
requirements to be observed for so-called "Residential, commercial and
light industry environments".

TOSHIBA do not approve the use of this product in working environments
other than the above mentioned "Residential, commercial and light industry
environments".

For example, the following environments are not approved:

■ Industrial Environments (e.g. environments where a mains voltage of

380V three-phase is used)

■ Medical Environments

■ Automotive Environments

■ Aircraft Environments

If this product is supplied with a network port, please refer to the paragraph
"Network connection".

Any consequences resulting from the use of this product in working
environments that are not approved are not the responsibility of TOSHIBA.

The consequences of the use of this product in non-approved working
environments may be:

■ Interference with other devices or machines in the near surrounding

area.

■ Malfunction of, or data loss from, this product caused by disturbances

generated by other devices or machines in the near surrounding area.

Therefore TOSHIBA strongly recommend that the electromagnetic
compatibility of this product should be suitably tested in all non-approved
working environments before use. In the case of automobiles or aircraft, the
manufacturer or airline respectively should be asked for permission before
use of this product.

Furthermore, for general safety reasons, the use of this product in
environments with explosive atmospheres is not permitted.

L30

Modem warning notice

Conformity Statement

The equipment has been approved to [Council Decision 98/482/EC ­"TBR 21"] for pan-European single terminal connection to the Public
Switched Telephone Network (PSTN).

However, due to differences between the individual PSTNs provided in
different countries/regions the approval does not, of itself, give an
unconditional assurance of successful operation on every PSTN network
termination point.

In the event of problems, you should contact your equipment supplier in the
first instance.

User’s Manual iv

Network Compatibility Statement

This product is designed to work with, and is compatible with the following
networks. It has been tested to and found to conform with the additional
requirements conditional in EG 201 121.

Germany ATAAB AN005, AN006, AN007, AN009, AN010 and

DE03, 04, 05, 08, 09,12,14,17
Greece ATAAB AN005, AN006 and GR01, 02, 03, 04
Portugal ATAAB AN001, 005, 006, 007, 011 and P03, 04, 08, 10
Spain ATAAB AN005, 007, 012, and ES01
Switzerland ATAAB AN002
All other

countries/regions

Specific switch settings or software setup are required for each network,
please refer to the relevant sections of the user guide for more details.

The hookflash (timed break register recall) function is subject to separate
national type approvals. It has not been tested for conformity to national
type regulations, and no guarantee of successful operation of that specific
function on specific national networks can be given.

ATAAB AN003, 004

Following information is only for EU-member states:

L30

The symbol indicates that this product may not be treated as
household waste. Please ensure this product is properly
disposed as inappropriate waste handling of this product may
cause potential hazards to the environment and human health.
For more detailed information about recycling of this product,
please contact your local city office, your household waste
disposal service or the shop where you purchased the product.

This symbol may not stick depending on the country and region where you
purchased.

User’s Manual v

Optical disc drive safety instructions

Be sure to check the international precautions at the end of this section.

TEAC

CD-ROM Drive CD-224E

■ The CD-ROM drive employs a laser system. To ensure proper use of

this product, please read this instruction manual carefully and retain for
future reference. Should the unit ever require maintenance, contact an
authorized service location.

■ Use of controls, adjustments or the performance of procedures other

than those specified may result in hazardous radiation exposure.

■ To prevent direct exposure to the laser beam, do not try to open the

enclosure.

L30

User’s Manual vi

TEAC

CD-RW/DVD-ROM Drive DW-224E

■ The CD-RW/DVD-ROM drive employs a laser system. To ensure

proper use of this product, please read this instruction manual carefully
and retain for future reference. Should the unit ever require
maintenance, contact an authorized service location.

■ Use of controls, adjustments or the performance of procedures other

than those specified may result in hazardous radiation exposure.

■ To prevent direct exposure to the laser beam, do not try to open the

enclosure.

L30

User’s Manual vii

Hitachi-LG Data Storage, Inc.

CD-RW/DVD-ROM Drive GCC-4244

■ The CD-RW/DVD-ROM drive employs a laser system. To ensure

proper use of this product, please read this instruction manual carefully
and retain for future reference. Should the unit ever require
maintenance, contact an authorized service location.

■ Use of controls, adjustments or the performance of procedures other

than those specified may result in hazardous radiation exposure.

■ To prevent direct exposure to the laser beam, do not try to open the

enclosure.

L30

User’s Manual viii

TOSHIBA SAMSUNG STORAGE TECHNOLOGY

CD-RW/DVD-ROM Drive TS-L462D

■ The CD-RW/DVD-ROM drive employs a laser system. To ensure

proper use of this product, please read this instruction manual carefully
and retain for future reference. Should the unit ever require
maintenance, contact an authorized service location.

■ Use of controls, adjustments or the performance of procedures other

than those specified may result in hazardous radiation exposure.

■ To prevent direct exposure to the laser beam, do not try to open the

enclosure.

L30

User’s Manual ix

Panasonic

CD-RW/DVD-ROM Drive UJDA770T

■ The CD-RW/DVD-ROM drive employs a laser system. To ensure

proper use of this product, please read this instruction manual carefully
and retain for future reference. Should the unit ever require
maintenance, contact an authorized service location.

■ Use of controls, adjustments or the performance of procedures other

than those specified may result in hazardous radiation exposure.

■ To prevent direct exposure to the laser beam, do not try to open the

enclosure.

L30

User’s Manual x

Panasonic

DVD Super Multi UJ-850U

■ The DVD Super Multi drive employs a laser system. To ensure proper

use of this product, please read this instruction manual carefully and
retain for future reference. Should the unit ever require maintenance,
contact an authorized service location.

■ Use of controls, adjustments or the performance of procedures other

than those specified may result in hazardous radiation exposure.

■ To prevent direct exposure to the laser beam, do not try to open the

enclosure.

L30

User’s Manual xi

HLDS

DVD Super Multi GSA-T10N

■ The DVD Super Multi drive employs a laser system. To ensure proper

use of this product, please read this instruction manual carefully and
retain for future reference. Should the unit ever require maintenance,
contact an authorized service location.

■ Use of controls, adjustments or the performance of procedures other

than those specified may result in hazardous radiation exposure.

■ To prevent direct exposure to the laser beam, do not try to open the

enclosure.

L30

User’s Manual xii

Pioneer

DVD Super Multi DVR-K17

■ The DVD Super Multi drive employs a laser system. To ensure proper

use of this product, please read this instruction manual carefully and
retain for future reference. Should the unit ever require maintenance,
contact an authorized service location.

■ Use of controls, adjustments or the performance of procedures other

than those specified may result in hazardous radiation exposure.

■ To prevent direct exposure to the laser beam, do not try to open the

enclosure.

L30

User’s Manual xiii

International precautions

L30

CAUTION: This appliance contains a laser
system and is classified as a "CLASS 1
LASER PRODUCT." To use this model
properly, read the instruction manual
carefully and keep this manual for your
future reference. In case of any trouble
with this model, please contact your
nearest "AUTHORIZED service station."
To prevent direct exposure to the laser
beam, do not try to open the enclosure.

VORSICHT: Dieses Gerät enthält ein
Laser-System und ist als
„LASERSCHUTZKLASSE 1 PRODUKT“
klassifiziert. Für den richtigen Gebrauch
dieses Modells lesen Sie bitte die
Bedienungsanleitung sorgfältig durch und
bewahren diese bitte als Referenz auf.
Falls Probleme mit diesem Modell
auftreten, benachrichtigen Sie bitte die
nächste „autorisierte Service-Vertretung“.
Um einen direkten Kontakt mit dem
Laserstrahl zu vermeiden darf das Gerät
nicht geöffnet werden.

ADVARSEL: Denne mærking er anbragt
udvendigt på apparatet og indikerer, at
apparatet arbejder med laserstråler af
klasse 1, hviket betyder, at der anvendes
laserstrlier af svageste klasse, og at man
ikke på apparatets yderside kan bilve
udsat for utilladellg kraftig stråling.

APPARATET BOR KUN ÅBNES AF
FAGFOLK MED SÆRLIGT KENDSKAB
TIL APPARATER MED LASERSTRÅLER!

Indvendigt i apparatet er anbragt den her
gengivne advarselsmækning, som advarer
imod at foretage sådanne indgreb i
apparatet, at man kan komme til at udsatte
sig for laserstråling.

User’s Manual xiv

L30

OBS! Apparaten innehåller
laserkomponent som avger laserstråining
överstigande gränsen för laserklass 1.

VAROITUS. Suojakoteloa si saa avata.
Laite sisältää laserdiodin, joka lähetää
näkymätöntä silmilie vaarallista
lasersäteilyä.

CAUTION: USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE
SPECIFIED IN THE OWNER’S MANUAL
MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.

VORSICHT: DIE VERWENDUNG VON
ANDEREN STEUERUNGEN ODER
EINSTELLUNGEN ODER DAS
DURCHFÜHREN VON ANDEREN
VORGÄNGEN ALS IN DER
BEDIENUNGSANLEITUNG
BESCHRIEBEN KÖNNEN
GEFÄHRLICHE
STRAHLENEXPOSITIONEN ZUR FOLGE
HABEN.

User’s Manual xv

General Precautions

TOSHIBA computers are designed to optimize safety, minimize strain and
withstand the rigors of portability. However, certain precautions should be
observed to further reduce the risk of personal injury or damage to the
computer.

Be certain to read the general precautions below and to note the cautions
included in the text of the manual.

Creating a computer-friendly environment

Place the computer on a flat surface that is large enough for the computer
and any other items you are using, such as a printer.

Leave enough space around the computer and other equipment to provide
adequate ventilation. Otherwise, they may overheat.

To keep your computer in prime operating condition, protect your work area
from:

■ Dust, moisture, and direct sunlight.

■ Equipment that generates a strong electromagnetic field, such as

stereo speakers (other than speakers that are connected to the
computer) or speakerphones.

■ Rapid changes in temperature or humidity and sources of temperature

change such as air conditioner vents or heaters.

■ Extreme heat, cold, or humidity.

■ Liquids and corrosive chemicals.

User’s Manual xvi

Stress injury

Carefully read the Instruction Manual for Safety and Comfort. It contains
information on the prevention of stress injuries to your hands and wrists
that can be caused by extensive keyboard use. Chapter 3, Getting Started,
also includes information on work space design, posture and lighting that
can help reduce physical stress.

Heat injury

■ Avoid prolonged physical contact with the computer. If the computer is

■ If the computer has been used for a long time, avoid direct contact with

■ The surface of the AC adaptor can become hot when in use but this

■ Do not lay the AC adaptor on a material that is sensitive to heat as the

L30

used for long periods, its surface can become very warm. While the
temperature will not feel hot to the touch, if you maintain physical
contact with the computer for a long time, for example if you rest the
computer on your lap or if you keep your hands on the palm rest, your
skin might suffer a low-heat injury.

the metal plate supporting the various interface ports as this can
become hot.

condition does not indicate a malfunction. If you need to transport the
AC adaptor, you should disconnect it and let it cool before moving it.

material could become damaged.

Pressure or impact damage

Do not apply heavy pressure to the computer or subject it to any form of
strong impact as this can damage the computer's components or otherwise
cause it to malfunction.

PC Card overheating

Some PC Cards can become hot during prolonged use which may result in
errors or instability in the operation of the device in question. In addition,
you should also be careful when you remove a PC Card that has been
used for a long time.

Mobile phones

Please be aware that the use of mobile phones can interfere with the audio
system. The operation of the computer will not be impaired in any way, but
it is recommended that a minimum distance of 30cm is maintained between
the computer and a mobile phone that is in use.

User’s Manual xvii

Instruction Manual for Safety and Comfort

All important information on the safe and proper use of this computer is
described in the enclosed Instruction Manual for Safety and Comfort. Be
sure to read it before using the computer.

L30

User’s Manual xviii

Table of Contents

Chapter 1 Introduction

Equipment checklist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Special features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

TOSHIBA Value Added Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9

Utilities and Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10

Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12

Chapter 2 The Grand Tour

Front with the display closed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Left side. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Right side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Backside . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Underside . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Front with the display open. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Optical media drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

AC adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

Chapter 3 Getting Started

Installing the battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Connecting the AC adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Opening the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Turning on the power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Windows Vista™ setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Turning off the power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Restarting the computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

System Recovery Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

Restoring the preinstalled software . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

User’s Manual xix

L30

Chapter 4

Operating Basics

Using the Touch Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Using the optical media drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Writing CDs with the DVD-ROM & CD-R/RW drive . . . . . . . . . . . . . . 4-7

Writing CD/DVDs with the DVD Super Multi drive

supporting DVD±R Double layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

TOSHIBA Disc Creator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12

When Using Ulead DVD MovieFactory for TOSHIBA . . . . . . . . . . . 4-14

Media care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

Sound System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17

Wireless communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19

LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21

Cleaning the computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22

Moving the computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23

Chapter 5 The Keyboard

Typewriter keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

F1 ... F12 function keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Soft keys: Fn key combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Hot keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Windows® special keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Keypad overlay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Generating ASCII characters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

Chapter 6 Power and Power-Up Modes

Power conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Power indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Battery types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

Care and use of the battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5

Replacing the battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10

Starting the computer by password . . . . . . . . . . . . . . . . . . . . . . . . . 6-12

Power-up modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13

Panel power off/on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13

System Auto Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13

Chapter 7 HW Setup

Accessing HW Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

HW Setup Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

User’s Manual xx

L30

Chapter 8

Optional Devices

PC card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

Memory expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4

Additional battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7

Additional AC adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7

External monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8

Security lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8

Chapter 9 Troubleshooting

Problem solving process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1

Hardware and system checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3

TOSHIBA support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-15

Appendix A Specifications

Appendix B Display Controller and Modes

Appendix C Wireless LAN

Appendix D AC Power Cord and Connectors

Appendix E Legal Footnotes

Appendix F If your computer is stolen

Glossary

Index

User’s Manual xxi

Preface

Congratulations on your purchase of the L30 computer. This powerful
notebook computer provides excellent expansion capability, including
multimedia devices, and it is designed to provide years of reliable, high­performance computing.

This manual tells how to set up and begin using your L30 computer. It also
provides detailed information on configuring your computer, basic
operations and care, using optional devices and troubleshooting.

If you are a new user of computers or if you’re new to portable computing,
first read over the Introduction and The Grand Tour chapters to familiarize
yourself with the computer's features, components and accessory devices.
Then read Getting Started for step-by-step instructions on setting up your
computer.

If you are an experienced computer user, please continue reading the
preface to learn how this manual is organized, then become acquainted
with this manual by browsing through its pages. Be sure to look over the
Special Features section of the Introduction, to learn about features that
are uncommon or unique to the computer. If you are going to install
PC Cards or connect external devices such as a monitor, be sure to read
Chapter 8, Optional Devices.

Manual contents

This manual is composed of the following nine chapters, six appendixes, a
glossary and an index.

Chapter 1, Introduction, is an overview of the computer's features,
capabilities, and options.

Chapter 2, The Grand Tour, identifies the components of the computer and
briefly explains how they function.

Chapter 3, Getting Started, provides a quick overview of how to begin
operating your computer and gives tips on safety and designing your work
area.

User’s Manual xxii

Chapter 4, Operating Basics, includes instructions on using the following
devices: Touch Pad, Sound System, optical media drive, modem, wireless
communication and LAN. It also provides tips on care of the computer.

Chapter 5, The Keyboard, describes special keyboard functions including
the keypad overlay and hot keys.

Chapter 6, Power and Power-Up Modes, gives details on the computer's
power resources and battery save modes.

Chapter 7, HW Setup explains how to configure the computer using the
HW Setup program.

Chapter 8, Optional Devices, describes the optional hardware available.
Chapter 9, Troubleshooting, provides helpful information on how to perform

some diagnostic tests, and suggests courses of action if the computer
doesn’t seem to be working properly.

The Appendices provide technical information about your computer.
The Glossary defines general computer terminology and includes a list of

acronyms used in the text.
The Index quickly directs you to the information contained in this manual.

Conventions

This manual uses the following formats to describe, identify, and highlight
terms and operating procedures.

Abbreviations

On first appearance, and whenever necessary for clarity, abbreviations are
enclosed in parentheses following their definition. For example: Read Only
Memory (ROM). Acronyms are also defined in the Glossary.

L30

Icons

Icons identify ports, dials, and other parts of your computer. The indicator
panel also uses icons to identify the components it is providing information
on.

Keys

The keyboard keys are used in the text to describe many computer
operations. A distinctive typeface identifies the key top symbols as they
appear on the keyboard. For example, Enter identifies the Enter key.

User’s Manual xxiii

Key operation

Some operations require you to simultaneously use two or more keys. We
identify such operations by the key top symbols separated by a plus sign
(+). For example, Ctrl + C means you must hold down Ctrl and at the same
time press C. If three keys are used, hold down the first two and at the
same time press the third.

L30

ABC When procedures require an action such as

clicking an icon or entering text, the icon’s name
or the text you are to type in is represented in the
type face you see to the left.

Display

ABC

Names of windows or icons or text generated by
the computer that appears on its display screen is
presented in the type face you see to the left.

Messages

Messages are used in this manual to bring important information to your
attention. Each type of message is identified as shown below.

Pay attention! A caution informs you that improper use of equipment or
failure to follow instructions may cause data loss or damage your
equipment.

Please read. A note is a hint or advice that helps you make best use of
your equipment.

Indicates a potentially hazardous situation, which could result in death or
serious injury, if you do not follow instructions.

User’s Manual xxiv

Introduction

This chapter provides an equipment checklist, and it identifies the
computer's features, options and accessories.

Some of the features described in this manual may not function properly if
you use an operating system that was not pre-installed by TOSHIBA.

Equipment checklist

Carefully unpack your computer. Save the box and packing materials for
future use.

Hardware

Check to make sure you have all the following items:

■ L30 Portable Personal Computer

■ Universal AC adaptor and power cord

■ Modular cable for modem (optional)

Chapter 1

It is necessary to install the battery to use this computer. Refer to Installing
the battery pack section in Chapter 3, Getting Started.

Software

Windows® Windows Vista™

The following software is preinstalled:

■ Microsoft

■ Microsoft Internet Explorer

■ TOSHIA Value Added Package

■ TOSHIBA Hardware Setup

User’s Manual 1-1

®

Windows Vista™

■ TOSHIBA Supervisor Password

■ TOSHIBA Assist

■ TOSHIBA ConfigFree

■ DVD Video Player

■ TOSHIBA Acoustic Silencer

®

■ Ulead DVD Movie Factory

for TOSHIBA

■ Online Manual

■ Display Driver

■ TouchPad Driver

■ Sound Driver

■ TOSHIBA Disc Creator

■ TOSHIBA Extended Tiles for Windows Mobility Center

Other software may preinstalled dependant on the model purchased.

Documentation and Backup Media

■ L30 User’s Manual

■ L30 Quickstart

■ Instruction Manual for Safety and Comfort

■ Warranty information

■ Product Recovery DVD-ROM

■ Microsoft

®

Windows Vista™ Quick Start Guide

Introduction

If any of the items are missing or damaged, contact your dealer
immediately.

Features

Please visit your region’s web site for the configuration details of the model
that you have purchased.

Processor

Built-in Depend on the model you purchased.

Chipset ATI

User’s Manual 1-2

®

Celeron® M processor

Intel

®

Radeon® Xpress 200M

Memory

Introduction

Main Memory
Disclaimer

Slots Up to 1024 MB memory module can be installed

Video RAM 64MB,128MB UMA for ATI integrated Graphics

Part of the main system memory may be used by
the graphics system for graphics performance
and therefore reduce the amount of main system
memory available for other computing activities.
The amount of main system memory allocated to
support graphics may vary depending on the
graphics system, applications utilized, system
memory size and other factors.

in each of the two memory slots for a maximum of
2 GB system memory total.

with HyperMemory™.
HyperMemory™ VRAM size will vary depending

on system memory size.

Power

Battery Pack Your computer is powered by a rechargeable

lithium-ion battery pack.

RTC Battery The internal RTC battery backs up the Real Time

Clock and calendar.

AC Adaptor The universal AC adaptor provides power to the

system and recharges the batteries when they
are low. It comes with a detachable power cord.

Because it is universal, it can receive a range of
AC voltage from 100 to 240 volts; however, the
output current varies among different models.
Using the wrong model can damage your
computer. Refer to the AC adaptor section in
Chapter 2, The Grand Tour.

User’s Manual 1-3

Disks

Introduction

Hard disk Disclaimer 1 Gigabyte (GB) means 109 = 1,000,000,000

bytes using powers of 10. The computer
operating system, however, reports storage
capacity using powers of 2 for the definition of
1GB = 230 = 1,073,741,824 bytes, and therefore
shows less storage capacity. Available storage
capacity will also be less if the product includes
one or more pre-installed operating systems,
such as Microsoft Operating System and/or pre­installed software applications, or media content.
Actual formatted capacity may vary.

Hard disk Drive Available in four sizes.

■ 40.0 billion bytes (37.26 GB)

■ 60.0 billion bytes (55.89 GB)

■ 80.0 billion bytes (74.51 GB)

■ 100.0 billion bytes (93.13 GB)

Other hard disk drives may introduced in the
future.

Computers in this series can be configured with a fixed optical media drive.
The available optical media drives are described below.

DVD-ROM & CD-R/RW
Drive

Some models are equipped with a full-size,
DVD-ROM & CD-R/RW drive module that lets you
run CD/DVDs without using an adaptor. It reads
DVD-ROM's at maximum 8 speed and CD-ROM's
at maximum 24 speed. It writes CD-R's at up to
24 speed and CD-RW's at up to 24 speed. This
drive supports the following formats:

■ CD-R

■ CD-RW

■ DVD-ROM

■ DVD-Video

■ CD-DA

■ CD-Text

■ Photo CD™ (Single/multi-session)

■ CD-ROM Mode 1, Mode 2

■ CD -ROM XA Mode 2 (Form1, Form 2)

■ Enhanced CD (CD-EXTRA)

User’s Manual 1-4

Introduction

DVD Super Multi drive
(Supporting DVD±R
Double Layer)

Some models are equipped with a full-size DVD
Super Multi drive module that lets you record data
to rewritable CD/DVDs as well as run either 12cm
(4.72") or 8cm (3.15") CD/DVDs without using an
adaptor. It reads DVD-ROM's at maximum
8 speed and CD-ROM's at maximum 24 speed.
It writes CD-R's at up to 24 speed, CD-RW's at up
to 16 speed, DVD-R's at maximum 8 speed,
DVD-RW's at maximum 6 speed. DVD+R's at
maximum 8 speed, DVD+RW's at maximum
8 speed, DVD+R(DL) discs at maximum 4 speed
and DVD-R(DL) discs at maximun 4 speed.

DVD-RAM at maximum 5 speed. This drive
supports the following formats in addition to
DVD-ROM & CD-R/RW drive.

■ DVD+R

■ DVD+RW

■ DVD-RAM

■ DVD-R

■ DVD-RW

■ DVD+R (DL)

■ DVD-R (DL)

CD-ROM Drive Some models are supplied with a full size

CD-ROM drive, that lets you play CD-ROMs
without using an adaptor. CD-ROMs are read at a
maximum speed of 24x. The drive supports the
following formats:

■ CD-Text

■ CD-Audio

■ CD-i

■ Video CD

■ Photo CD™ (Single/Multi Session)

■ CD ROM Mode 1, Mode 2

■ CD-ROM XA Mode 2 (Form 1, Form 2)

■ Enhanced CD (CD-Extra)

Display

The computer's LCD panel supports high-resolution video graphics. The
screen can be set at a wide range of viewing angles for maximum comfort
and readability.

Built-In 14.1” WXGA / or 15.4” WXGA TFT, non-glare,

User’s Manual 1-5

16 M colors, with the following resolution:
1280 horizontal × 800 vertical pixels

Graphics Controller Graphics controller maximizes display

performance. Refer to Display Controller and

Modes section in Appendix B, Display Controller
and Modes for more information.

Keyboard

Introduction

Built-In 84 keys or 85 keys, compatible with IBM

enhanced keyboard, embedded numeric overlay,
dedicated cursor control, and keys. Refer
to Chapter 5, The Keyboard, for details.

Pointing Device

Built-In TouchPad A Touch Pad and control buttons in the palm rest

enable control of the on-screen pointer and
scrolling of windows.

Ports

External Monitor Depending on the model you purchased:

15-pin, analog VGA port supports VESA DDC2B
compatible functions.

Universal Serial Bus
(USB 2.0)

The computer has Universal Serial Bus ports that
comply with the USB 2.0 standard, which enables
data transfer speeds 40 times faster than the
USB 1.1 standard. (The ports also support
USB 1.1.)

Slots

PC Card Depending on the model you purchased:

The PC Card slot accommodates Type II card.

Multimedia

®

Sound System A Windows

system provides speakers as well as jacks for an
external microphone and headphones.

Headphone Jack This jack outputs analog audio signals.
Microphone Jack A 3.5 mm mini microphone jack enables

connection of a three-conductor mini jack for
monaural microphone input.

User’s Manual 1-6

Sound System compatible sound

Communications

Introduction

Modem The internal modem provides capability for data

and fax communication. It supports V.90 (V.92).
The speed of data transfer and fax
communication depends on the analog telephone
line conditions. The computer has a modem jack
for connection to a telephone line. Both of V.90
and V.92 are supported only in USA, Canada,
Australia, UK, France and Germany. Only V.90 is
available in other regions.

LAN The computer has built-in support for Ethernet

LAN (10 megabits per second, 10BASE-T) and
Fast Ethernet LAN (100 megabits per second,
100BASE-TX).

Wireless LAN The Wireless LAN feature is not available on all

models. Where present, it supports the B and G
standard but it is compatible with other LAN
systems based on Direct Sequence Spread
Spectrum / Orthogonal Frequency Division
Multiplexing radio technology that complies with
the IEEE 802.11 Standard.

■ Automatic Transmit Rate Select mechanism in

the transmit range of 54, 48, 36, 24, 18, 12, 9
and 6 Mbit/s. (IEEE 802.11g)

■ Automatic Transmit Rate Select mechanism in

the transmit range of 11, 5.5, 2 and 1 Mbit/s.
(IEEE 802.11b)

■ Roaming over multiple channels

■ Card Power Management

■ Wired Equivalent Privacy (WEP) data

encryption, based on 128 bit encryption
algorithm.

■ Advanced Encryption Standard (AES) data

encryption, based on 128 bit encryption
algorithm.

User’s Manual 1-7

Special features

The following features are either unique to TOSHIBA computers or are
advanced features, which make the computer more convenient to use.

*1. Click , Control Panel, System and Maintenance, and then click

Power Options.

Hot Keys Key combinations let you quickly modify the

Keypad Overlay A ten-key pad is integrated into the keyboard.

Instant Security The hot key function Fn + F1 blanks the screen

Display Automatic
Power Off

HDD Automatic Power

*1

Off

System Automatic
Sleep Mode/
Hibernation

Intelligent Power
Supply

Battery Save Mode

Panel Power On/Off

*1

Introduction

system configuration directly from the keyboard
without running a system configuration program.

Refer to the Keypad overlay section in Chapter 5,
The Keyboard, for instructions on using the
keypad overlay.

and disables the computer, providing data
security.

*1

This feature automatically cuts off power to the
internal display when there is no keyboard input
for a specified time. Power is restored when any
key is pressed.

This can be specified in the Power Options.
This feature automatically cuts off power to the

hard disc drive when it is not accessed for a
specified time. Power is restored when the hard
disc is accessed.

This can be specified in the Power Options.
This feature automatically shuts down the system

*1

into Sleep Mode or Hibernation Mode when there
is no input or hardware access for a specified
time.

This can be specified in the Power Options.
A microprocessor in the computer's intelligent

power supply detects the battery’s charge and
calculates the remaining battery capacity. It also
protects electronic components from abnormal
conditions, such as voltage overload from an
AC adaptor.

This can be specified in the Power Options.

*1

This feature lets you save battery power.
This can be specified in the Power Options.

*1

This feature turns power to the computer off when
the display panel is closed and turns it back on
when the panel is opened.

This can be specified in the Power Options.

User’s Manual 1-8

Introduction

Low Battery
Automatic
Hibernation

Hibernation This feature lets you turn off the power without

Sleep Mode If you have to interrupt your work, you can turn off

*1

When battery power is exhausted to the point that
computer operation cannot be continued, the
system automatically enters Hibernation Mode
and shuts down.

This can be specified in the Power Options.

exiting from your software. The contents of main
memory are saved to the hard disk so that when
you turn on the power again, you can continue
working right where you left off. Refer to the

Turning off the power section in Chapter 3,
Getting Started, for details.

the power without exiting from your software.
Data is maintained in the computer's main
memory so that when you turn on the power
again, you can continue working right where you
left off.

TOSHIBA Value Added Package

This section describes the TOSHIBA Component features pre-installed on
the computer.

TOSHIBA Power
Saver

TOSHIBA Zooming
Utility

TOSHIBA PC
Diagnostic Tool

TOSHIBA Flash Cards This utility supports the following functions.

TOSHIBA
Components
Common Driver

TOSHIBA Power Saver provides you with the
features of more various power supply
managements.

This utility allows you to enlarge or reduce the
icon size on the Windows Desktop, or the zoom
factor associated with specific supported
applications.

The TOSHIBA PC Diagnostic Tool will display
basic system configuration information and allow
the functionality of some of the computer's builtin
hardware devices to be tested.

■ Hot key function

■ Toshiba utility launcher function

Toshiba Components Common Driver contains
the module required for the utility which TOSHIBA
offers.

User’s Manual 1-9

Introduction

TOSHIBA
Accessibility

Utilities and Applications

This section describes pre-installed utilities and tells how to start them. For
details on operations, refer to each utility’s online manual, help files or
readme.txt files.

TOSHIBA Assist TOSHIBA Assist is a graphical user interface that

HW Setup This program lets you customize your hardware

Power On Password Two levels of password security, supervisor and

DVD Video Player The DVD Video Player is used to play DVD Video.

TOSHIBA Disc
Creator

The TOSHIBA Accessibility utility provides
support to movement impaired users when they
need to use the TOSHIBA Hot-key functions. In
use, the utility allows you to make the Fn key
'sticky', that is you can press it once, release it,
and they press one of the 'F' keys in order to
access its specific function. When set, the Fn key
will remain active until another key is pressed.

provides easy access to help and services.

settings according to the way you work with your
computer and the peripherals you use. To start
the utility, double click the TOSHIBA Assist on
your desktop, select OPTIMIZE tab, and click
TOSHIBA HW Settings.

user, are available to prevent unauthorized
access to your computer.

To register a supervisor password, double click
the TOSHIBA Assist on your desktop select the
SECURE tab and start the Supervisor password
utility.

To set a user password, select the SECURE tab
on TOSHIBA Assist, then start the User
password utility. On the Password tab you can
register a user password.

It has an on-screen interface and functions. Click

, point to All Programs, point to InterVideo

WinDVD, then click InterVideo WinDVD for
TOSHIBA.

You can create CD’s in several formats including
audio CDs that can be played on a standard
stereo CD player and data CDs to store the files
and folders on your hard disk drive.

To run TOSHIBA Disc Creator, click , select All
Programs, TOSHIBA, CD&DVD Applications,
and then click Disc Creator.

User’s Manual 1-10

Introduction

TOSHIBA DVD-RAM
Utility

TOSHIBA DVD-RAM Utility has a Physical
Format function and Write-Protect function to
DVD-RAM.

This utility is contained in the TOSHIBA Disc
Creator setup module.

To run TOSHIBA DVD-RAM Utility, click ,
select All Programs, TOSHIBA, CD&DVD

Applications, and then click DVD-RAM Utility.

TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy

control of communication device and network
connections. ConfigFree also allows you to find
communication problems and create profiles for
easy switching between location and
communication networks.

To run ConfigFree, click , select All Programs,

TOSHIBA Networking and then click
ConfigFree.

Windows Mobility
Center

This section describes the Windows Mobility
Center. Mobility Center is a utility for accessing
several mobile PC settings quickly in one window.
A maximum of eight tiles are prepared as the
operating system default. Three additional tiles
are also added to your Mobility Center.

Installing the "TOSHIBA Extended Tiles for
Windows Mobility Center" package will add the
following functions.

■ Lock Computer:

Lock your computer without turning it off. This
has the same function as the Lock button at
the bottom of the right pane of the start menu.

■ TOSHIBA Assist:

Open the TOSHIBA Assist if it is already
installed in your computer.

User’s Manual 1-11

Options

Introduction

You can add a number of options to make your computer even more
powerful and convenient to use. Refer to Chapter 8 Optional Devices, for
details. The following options are available:

Memory expansion Two memory modules can be installed in this

Use only DDRII-533MHz compatible memory modules. See your
TOSHIBA dealer for details.

Battery pack An additional battery pack can be purchased from

AC Adaptor If you use your computer at more than one site

computer.

your TOSHIBA dealer. Use it as a spare or
replacement.

frequently, it may be convenient to purchase an
additional AC adaptor for each site so you will not
have to carry the adaptor with you.

User’s Manual 1-12

The Grand Tour

This chapter identifies the various components of your computer. Become
familiar with each component before you operate the computer.

Front with the display closed

The following figure shows the computer's front with its display panel in the
closed position.

Power/Battery/HDD

LEDs

Wireless Activity

LED

Chapter 2

Display Latch

Speaker

Speakers The speakers emit sound generated by your

Power The Power indicator glows green when the

User’s Manual 2-1

Wireless

Communication Switch

Front of the computer with display closed

software as well as audio alarms, such as low
battery condition, generated by the system.

computer is on. If you select Sleep Mode from
Turn Off Computer, this indicator flashes orange
(one second on, two seconds off) while the
computer enters Sleep Mode.

Headphone

Jack

Microphone

Jack

Speaker

The Grand Tour

Battery The Battery indicator shows the condition of the

battery's charge: Green indicates a full charge,
orange indicates that the battery is charging and
flashing orange indicates a low battery charge.
Refer to Chapter 6, Power and Power-Up Modes.

Built-in HDD/ODD The Built-in HDD/ODD indicator glows green

when the computer accesses the hard disk drive
or and optical disc drive.

Wireless
Communication
Switch(optional)

The Wireless Communication Switch turns on the
wireless LAN. (Depends on the model you
purchased.)

Set the switch to off in airplanes and hospitals. Check the wireless activity
indicator. It will stop glowing when the wireless communication function is
off.

Left side

Wireless Activity
LED(optional)

Shows you Wireless LAN activity, and whether
the Wireless LAN feature is engaged or not.

Display Latch This latch secures the LCD panel in its closed

position. Slide the latch to open the display.

Headphone Jack This jack outputs analog audio signals.

Microphone Jack A 3.5 mm mini microphone jack enables

connection of a three-conductor mini jack for
monaural microphone input.

The following figure shows the computer's left side.

External Monitor Port

USB Port

Cooling Vents

The left side of the computer

Modem Jack

PC Card Slot

User’s Manual 2-2

The Grand Tour

External Monitor Port This 15-pin port lets you connect an external

video display. The Analog VGA port supports
VESA DDC2B compatible functions. (Depends on
the model you purchased.)

Cooling Vents Cooling vents help prevent the CPU from

overheating.

Do not block the cooling vents. Also ensure that foreign objects are kept
out of the vents as items such as pins or similar objects, which can
damage the computer's circuitry.

Universal Serial Bus
(USB 2.0) ports

The Universal Serial Bus port complies with the
USB 2.0 standard, which enables data transfer
speeds 40 times faster than the USB 1.1 standard
(The ports also support USB 1.1). Keep foreign
objects out of the USB connector. A pin or similar
object can damage the computer's circuitry.
Operation of all functions of all USB devices has
not been confirmed. As such, some untested
third-party devices may not function properly.

Modem Jack The modem jack allows you to use a modular

cable to connect the modem directly to a
telephone line. (Depends on the model you
purchased.)

■ In case of a lightning storm, unplug the

modem cable from the telephone jack.

■ Do not connect the modem to a digital

telephone line. A digital line will damage the
modem.

PC Card Slot The PC Card slot can accommodate one Type II

card. The slot supports 16-bit PC Cards and
CardBus PC Cards. (Depends on the model you
purchased.)

User’s Manual 2-3

Right side

The Grand Tour

The following figure shows the computer's right side.

Backside

ODD

Indicator

The right side of the computer

Eject Button

Emergency

Eject Hole

ODD Indicator The ODD indicator glows amber when the

computer accesses the optical disc drive.

Eject Button Press this button to open the ODD tray.
Emergency Eject Hole In the event that the disc drive becomes

inexplicably locked or stops responding press this
button to force a manual ejection of the ODD tray.

The following figure shows the computer's back panel.

USB Port

Security Lock DC IN 19V Jack

The backside of the computer

LAN Jack

Security Lock A security cable attaches to this port. The optional

security cable anchors your computer to a desk or
other large object to deter theft.

User’s Manual 2-4

The Grand Tour

Underside

The following figure shows the underside of the computer. Make sure the
display is closed before turning over your computer.

Universal Serial Bus
(USB 2.0) port

The Universal Serial Bus port complies with the
USB 2.0 standard, which enables data transfer
speeds 40 times faster than the USB 1.1 standard
(The ports also support USB 1.1). Keep foreign
objects out of the USB connectors. A pin or
similar object can damage the computer's
circuitry. Operation of all functions of all USB
devices has not been confirmed. As such, some
untested third-party devices may not function
properly.

DC IN 19V Jack The AC adaptor connects to this socket. Use only

the model of AC adaptor that comes with the
computer. Using the wrong adaptor can damage
your computer.

LAN Jack This jack lets you connect to a LAN. The adaptor

has built-in support for Ethernet LAN
(10 megabits per second, 10BASE-T) and
Fast Ethernet LAN (100 megabits per second,
100BASE-TX). Refer to Chapter 4, Operating

Basics, for details.

Battery Pack Battery Release Latch (2)

Battery
Release
Lock (1)

HDD Cover

The underside of the computer

User’s Manual 2-5

Cooling Vents

Memory
Module
Cover

Wireless LAN
Cover

Hard Disk Cover This cover protects the hard disk.

Battery Release Lock
(1)

Battery Pack The battery pack powers the computer when the

Battery Release Latch
(2)

Cooling Vents Cooling vents help prevent the CPU from

Memory Module
Cover

Wireless LAN Cover This cover protects the Wireless LAN bay and, if

Front with the display open

The Grand Tour

Slide this lock to prepare the battery pack for
removal.

AC adaptor is not connected. For detailed
information on the battery pack, refer to
Chapter 6, Power and Power-Up Modes.

Slide and hold this latch to release the battery
pack for removal. For detailed information on
removing the battery packs, refer to Chapter 6,

Power and Power-Up Modes.

overheating.
This cover protects two memory module sockets -

-one or two modules are preinstalled. Refer to the

Memory expansion section in Chapter 8, Optional
Devices.

installed, the Wireless LAN card.

This section shows the front of the computer with the display open. Refer to
the appropriate illustration for details. To open the display, slide the display
latch on the front of the display and lift up. Position the display at a
comfortable viewing angle.

Display Screen

Power Button

The front of the computer with the display open

User’s Manual 2-6

TouchPad

TouchPad Control
Buttons

Power Button Turns the computer on and off as well as putting it

Display Screen The LCD displays high-contrast text and graphics.

TouchPad A TouchPad located in the centre of the palm rest

TouchPad Control
Buttons

Optical media drive

One of the following optical media drives is installed in the computer, either
a CD-ROM drive or DVD-ROM&CD-R/RW drive or a DVD Super Multi
drive. An ATAPI interface controller is used for CD/DVD operation. When
the computer is accessing a CD/DVD, an indicator on the drive glows.

The Grand Tour

into Hibernation mode and waking it up from
Stand by mode.

Refer to Appendix B, Display Controller and

Modes. When the computer operates on the

AC adaptor the display screen’s image will be
somewhat brighter than when it operates on
battery power. The lower brightness level is
intended to save battery power.

is used to control the on-screen pointer.
These let you select menu items or manipulate

text and graphics designated by the on-screen
pointer. Refer to the Using the Touch Pad section
in Chapter 4, Operating Basics.

Region codes for DVD drive and media

DVD-ROM&CD-R/RW drive and the DVD Super Multi drives and their
associated media are manufactured according to the specifications of six
marketing regions. When you purchase DVD-Video, make sure it matches
your drive, otherwise it will not play properly.

Code Region
1 Canada, United States
2 Japan, Europe, South Africa, Middle East
3 Southeast Asia, East Asia
4 Australia, New Zealand, Pacific Islands, Central America,

5 Russia, Indian Subcontinent, Africa, North Korea, Mongolia
6 China

South America, Caribbean

Writable discs

This section describes the types of writable CD discs. Check the
specifications of your drive for the type of discs it can write. Use TOSHIBA
Disc Creator to write compact discs. Refer to Chapter 4, Operating Basics.

User’s Manual 2-7

CDs

■ CD-R discs can be written only once. The recorded data cannot be

erased or changed.

■ CD-RW discs can be recorded more than once. Use either 1, 2, or 4

multi speed CD-RW discs or high-speed 4- to 10-speed discs. The write
speed of the ultra-speed CD-RW discs (Ultra-speed is available on the
DVD-ROM & CD-R/RW drive only) is a maximum of 24-speed.

Formats

The drives support the following formats:

■ DVD-ROM

■ CD-DA

■ Photo CD™ (single/multi-session)

■ CD-ROM XA Mode 2 (Form1, Form2)

■ CD-R

■ DVD -Video

■ CD-Text

■ CD-ROM Mode 1, Mode 2

■ Enhanced CD (CD-EXTRA)

■ CD-RW

DVD-ROM & CD-R/RW drive

The full-size DVD-ROM & CD-R/RW drive module lets you record data to
writable CDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs
without using an adaptor.

The Grand Tour

The read speed is slower at the centre of a disc and faster at the outer
edge.

DVD read 8 speed (maximum)
CD read 24 speed (maximum)
CD-R write 24 speed (maximum)
CD-RW write 24 speed (maximum, Ultra speed media)

User’s Manual 2-8

DVD Super Multi drive (Supporting DVD±R Double Layer)

The full-size DVD Super Multi drive module lets you record data to writable
CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs
without using an adaptor.

The read speed is slower at the centre of a disc and faster at the outer
edge.

DVD read 8 speed (maximum)
DVD-R write 8 speed (maximum)
DVD-RW write 6 speed (maximum)
DVD+R write 8 speed (maximum)
DVD+RW write 8 speed (maximum)
DVD-R(DL) write 4 speed (maximum)
DVD+R(DL) write 4 speed (maximum)
DVD-RAM write 5 speed (maximum)
CD read 24 speed (maximum)
CD-R write 24 speed (maximum)
CD-RW write 16 speed (maximum, Ultra-speed media)

AC adaptor

The AC adaptor converts AC power to DC power and reduces the voltage
supplied to the computer. It can automatically adjust to any voltage from
100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to
use the computer in almost any country/region.

To recharge the battery, simply connect the AC adaptor to a power source
and the computer. Refer to Chapter 6, Power and Power-Up Modes, for
details.

The Grand Tour

The AC adaptor

User’s Manual 2-9

The Grand Tour

■ Use only the AC adaptor that came with the computer or an equivalent

optional adaptor. Use of the wrong adaptor could damage your
computer. TOSHIBA assumes no liability for any damage in such case.

■ Use only the AC Adaptor supplied with your computer or an equivalent

adapter that is compatible. Use of any incompatible adaptor or other
types of AC Adaptors may have a different voltage which could cause
damage to your computer, computer failure and/or possible data loss.
Toshiba assumes no liability for any damage, computer failure and/or
data loss caused by use of an incompatible adaptor.

Use only the AC adaptor supplied as an accessory. Other AC adaptors
have different voltage and terminal polarities and use of them may produce
heat and smoke or even result in fire or rupture.

User’s Manual 2-10

Getting Started

This chapter provides basic information to get you started using your
computer. It covers the following topics:

Be sure also to read the Instruction Manual for Safety and Comfort. This
guide, which is included with the computer, explains product liability.

■ Installing the battery pack

■ Connecting the AC adaptor

■ Opening the display

■ Turning on the power

■ Windows Vista™ setup

■ Turning off the power

■ Restarting the computer

■ Restoring the preinstalled software

All users should be sure to read the section Windows® Vista setup.

Chapter 3

User’s Manual 3-1

Installing the battery pack

To install a battery, follow the steps below.

■ The battery pack is a lithium ion battery, which can explode if not

properly replaced, used, handled or disposed of. Dispose of the battery
as required by local ordinances or regulations. Use only batteries
recommended by TOSHIBA as replacements.

■ Do not touch the latch while holding the computer. Or you may get

injured by the dropped battery by unintentional release of the latch.

■ Please do not push the power button before installing the battery pack.

1. Turn the computer's power off.

2. Disconnect all cables connected to the computer.

3. Insert the battery pack. The Battery Release Latch (2) clicks into place.

4. Secure the Battery Release Lock (1) to ensure the battery is locked into
place. Later, when you want to remove the battery you must disengage
this lock first.

Getting Started

Battery Release Latch (2)

Battery
Release
Lock (1)

Securing the battery pack

Refer to Removing the battery pack section in Chapter 6, Power and

Power-Up Modes, for removing the battery pack.

User’s Manual 3-2

Connecting the AC adaptor

Attach the AC adaptor when you need to charge the battery or you want to
operate from AC power. It is also the fastest way to get started, because
the battery pack will need to be charged before you can operate from
battery power.

The AC adaptor can be connected to any power source supplying from 100
to 240 volts and 50 or 60 hertz. For details on using the AC adaptor to
charge the battery pack, refer to Chapter 6, Power and Power-Up Modes.

Use only the AC adaptor supplied as an accessory. Other AC adaptors
have different voltage and terminal polarities and use of them may produce
heat and smoke or even result in fire or rupture.

■ Use only the AC adaptor supplied with your computer or an equivalent

adaptor that is compatible. Use of any incompatible adaptor could
damage your computer. TOSHIBA assumes no liability for any damage
caused by use of an incompatible adaptor.

■ When you connect the AC adaptor to the computer, always follow the

steps in the exact order as described in the User's Manual. Connecting
the power cable to a live electrical outlet should be the last step
otherwise the adaptor DC output plug could hold an electrical change
and cause an electrical shock or minor bodily injury when touched. As
a general safety precaution, avoid touching any metal parts.

1. Connect the power cord to the AC adaptor.

Getting Started

Connecting the power cord to the AC adaptor

2. Connect the AC adaptor's DC output plug to the DC IN 19V jack on the
back of the computer.

User’s Manual 3-3

3. Plug the power cord into a live wall outlet.

Opening the display

The display panel can be rotated in a wide range of angles for optimal
viewing.

1. Slide the display latch on the front of the computer to the right.

2. Lift the panel up and adjust it to the best viewing angle for you.

Use reasonable care when opening and closing the display panel. Opening
it vigorously or slamming it shut could damage the computer.

Getting Started

Connecting the adaptor to the computer

Opening the display

Turning on the power

This section describes how to turn on the power.

After you turn on the power for the first time, do not turn it off until you have
set up the operating system. Refer to the section Windows Vista™ setup.

Press and hold the computer's power button for two or three seconds.

User’s Manual 3-4

Windows Vista™ setup

Getting Started

Turning on the power

When you first turn on the power, the computer's initial screen is the
Microsoft

Follow the on-screen directions.

Be sure to read the Windows End User License Agreement display
carefully.

®

Windows Vista™ Startup Screen Logo.

Turning off the power

The power can be turned off in one of the following modes: Shut down
(Boot), Hibernation or Sleep Mode.

Shut Down mode (Boot mode)

When you turn off the power in Shut Down mode no data is saved and the
computer will boot to the operating system’s main screen.

1. If you have entered data, save it to the hard disk.

2. Make sure all disk (disc) activity has stopped, then remove the CD/
DVDs.

Make sure the Built-in HDD/ODD indicators are off. If you turn off the
power while a disk (disc) is being accessed, you can lose data or damage
the disk (disc).

User’s Manual 3-5

3. Click then click the arrow icon located in the power management
button . From the pull down menu, choose Shut Down.

4. Turn off the power to any peripheral devices.

Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.

Sleep Mode

If you have to interrupt your work, you can turn off the power without exiting
from your software. Data is maintained in the computer's main memory.
When you turn on the power again, you can continue working right where
you left off.

■ When the AC adaptor is connected, the computer will go into Sleep

Mode according to the settings in the Power Options.

■ To restore operation from Sleep Mode, press the power button or press

any key. The latter action works only if Wake-up on Keyboard is
enabled in HW Setup.

■ If the computer automatically enters Sleep Mode while a network

application is active, the application might not be restored when the
computer wakes up from Sleep Mode.

■ To prevent the computer from automatically entering Sleep Mode,

disable Sleep Mode in the Power Options. That action, however, will
nullify the computer's Energy Star compliance.

Getting Started

■ Before entering Sleep Mode, be sure to save your data.

■ Do not install or remove a memory module while the computer is in

Sleep Mode. The computer or the module could be damaged.

■ Do not remove the battery pack while the computer is in Sleep Mode

(unless the computer is connected to an AC power source). Data in
memory will be lost.

Benefits of Sleep Mode

The Sleep Mode feature provides the following benefits:

■ Restores the previous working environment more rapidly than does

Hibernation Mode.

■ Saves power by shutting down the system when the computer receives

no input or hardware access for the duration set by the System Sleep
Mode feature.

■ You can use the panel power off feature.

User’s Manual 3-6

Getting Started

Entering Sleep Mode

You can enter Sleep Mode in one of four ways:

■ Click Start then click the power button ( ) located in the power

management buttons ( ).
Please note that this feature must be enabled within the Power Options

(to access it, click Æ Control Panel Æ System and Maintenance
Æ Power Options).

■ Click , click power button located in the power management

buttons , or click arrow button and select Sleep from
the menu.

■ Close the display panel. This feature must be enabled. Please refer to

the Power Options (to access it, click Æ Control Panel Æ System
and Maintenance Æ Power Options).

■ Press the power button. This feature must be enabled. Please refer to

the Power Options (to access it, click Æ Control Panel Æ System
and Maintenance Æ Power Options).

When you turn the power back on, you can continue where you left when
you shut down the computer.

You can also enable Sleep Mode by pressing Fn + F3. Refer to Chapter 5,

The Keyboard, for details.

■ When the computer is shut down in Sleep Mode, the power indicator

flashes orange.

■ If you are operating the computer on battery power, you can lengthen

the operating time by turning it off into Hibernation Mode, as Sleep
Mode consumes more power.

Sleep Mode limitations

Sleep Mode will not function under the following conditions:

■ Power is turned back on immediately after shutting down.

■ Memory circuits are exposed to static electricity or electrical noise.

Hibernation Mode

The hibernation feature saves the contents of memory to the hard disk
when the computer is turned off. The next time the computer is turned on,
the previous state is restored. The hibernation feature does not save the
status of peripheral devices.

■ Save your data. While entering Hibernation Mode, the computer saves

the contents of memory to the HDD. However, for safety sake, it is best
to save your data manually.

■ Data will be lost if you remove the battery or disconnect the AC adaptor

before the save is completed. Wait for the disk indicator to go out.

■ Do not install or remove a memory module while the computer is in

Hibernation Mode. Data will be lost.

User’s Manual 3-7

Getting Started

Benefits of Hibernation Mode

The Hibernation Mode feature provides the following benefits:

■ Saves data to the hard disk when the computer automatically shuts

down because of a low battery.

■ You can return to your previous working environment immediately when

you turn on the computer.

■ Saves power by shutting down the system when the computer receives

no input or hardware access for the duration set by the System
hibernate feature.

■ You can use the panel power off feature.

Starting Hibernation Mode

You can also enable Hibernation Mode by pressing Fn + F4. Refer to
Chapter 5, The Keyboard, for details.

To enter Hibernation Mode, follow the steps below.

1. Click .

2. Click the arrow icon located in the power management button

3. From the pull down menu, select Hibernate.

.

Automatic Hibernation Mode

The computer will enter Hibernation mode automatically when you press
the power button or close the Display Screen. First, however, make the
appropriate settings according to the steps below.

1. Open the Control Panel.

2. Open System and Maintenance and open Power Options.

3. Select the Choose what the power button does.

4. Enable the desired Hibernation settings for When I press the power
button and When I close the lid.

5. Click the Save changes button.

Data save in Hibernation Mode

When you turn off the power in Hibernation Mode, the computer takes a
moment to save current memory data to the hard disk. During this time, the
disk indicator will light.

After you turn off the computer and memory is saved to the hard disk, turn
off the power to any peripheral devices.

Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.

User’s Manual 3-8

Restarting the computer

Certain conditions require that you reset the system. For example, if:

■ You change certain computer settings.

■ An error occurs and the computer does not respond to your keyboard

commands.

■ There are three ways to reset the computer system:

1. Click then click the arrow icon located in the power management
button , and select Restart from pull down menu.

2. Press Ctrl + Alt + Del to display the menu window, then select Restart
from the Shut down options.

3. Press the power button and hold it down for five seconds. Wait 10 to
15 seconds, then turn the power on again by pressing the power button.

System Recovery Options

About 1.5GB hidden partition is allocated on the hard drive for the System
Recovery Options.

The System Recovery Options feature will be unusable if this partition is
deleted.

The System Recovery Options feature is installed on the hard disk when
shipped from the factory. The System Recovery Options menu includes
some tools to repair startup problems, run diagnostics or restore the sys­tem. You can see the more information about “Startup Repair” in “Windows
Help and Support“ content.

The System Recovery Options can also be run manually to repair
problems. The procedure is as follows. Follow the instructions shown on
the onscreen menu.

1. Turn off the computer.

2. While holding the F8 key, turn the computer on.

3. The Advanced Boot Options menu will be displayed. Use the arrow
keys to select Repair Your Computer and press Enter.

4. Follow the on-screen instructions.

Getting Started

The Windows Vista CompletePC Backup feature can be used on Windows
Vista™ Business Edition and Ultimate Edition.

Restoring the preinstalled software

If the preinstalled files are damaged, use the Product Recovery Media to
restore them. To restore the operating system and all preinstalled software,
follow the steps below.

User’s Manual 3-9

Getting Started

Restoring the Windows operating system

When you reinstall the Windows operating system, the hard disk will be
reformatted and all data will be lost.

1. Load the Recovery Media in the optical media drive and turn off the
computer's power.

2. Hold down the F12 key and turn on the power. When In Touch with
Tomorrow TOSHIBA appears, release the F12 key.

3. Use the upper or lower cursor key to select the CD/DVD icon in the
displayed menu. For details, refer to the Boot Priority section in
Chapter 7, HW Setup.

4. A menu appears. Follow the on-screen instructions.

5. If your computer came with additonal software installed, this software
can not be recovered from the Product Recovery DVD-ROM. Re-install
these applications (e.g. Works Suite, DVD Player, Games, etc.)
separately from other media.

User’s Manual 3-10

Operating Basics

This chapter gives information on basic operations including using the
Touch Pad, optical media drive, sound system, modem, the Wireless LAN
and LAN. It also provides tips on cleaning and moving your computer.

Using the Touch Pad

To use the TouchPad, simply touch and move your finger tip across it in the
direction you want the on-screen pointer to go.

Chapter 4

TouchPad

TouchPad control buttons

Touch Pad and Touch Pad control buttons

Two buttons below the keyboard are used like the buttons on a mouse
pointer. Press the left button to select a menu item or to manipulate text or
graphics designated by the pointer. Press the right button to display a menu
or other function depending on the software you are using.

User’s Manual 4-1

Do not press on the TouchPad too hard or press a sharp object such as a
ball point pen against the TouchPad. The TouchPad could be damaged.

For some functions, you can tap the Touch Pad instead of pressing a
control button.

Click: Tap the TouchPad once
Double-click: Tap the TouchPad twice
Drag and drop:

1. Hold down the left control button and move the cursor to drag the item
you want to move.

2. Lift your finger to drop the item where you want it.

Scroll:

Vertical: Move your finger up or down the right edge of the TouchPad.
Horizontal: Move your finger left or right along the bottom edge of the

TouchPad.

Using the optical media drive

The full-size drive provides high-performance execution of CD-ROM-based
programs. You can run either 12 cm (4.72") or 8 cm (3.15") CDs without an
adaptor. An ATAPI interface controller is used for CD-ROM operation.
When the computer is accessing a CD/DVD, an indicator on the drive
glows.

Refer also to the Writing CDs with the DVD-ROM & CD-R/RW drive section
for precautions on writing to CDs/DVDs.

If you have a DVD Super Multi drive, refer also to the Writing CD/DVDs with

the DVD Super Multi drive supporting DVD±R Double layer section for

precautions on writing to CDs/DVDs.

Operating Basics

User’s Manual 4-2

Loading discs

To load a disc, follow the steps below and refer to the figures.

1. a. When the power is on, press the eject button to open the drawer
slightly.

Eject Button

Pressing the eject button

b. Pressing the eject button will not open the drawer when the disc
drive's power is off. If the power is off, you can open the drawer by
inserting a slender object (about 15 mm) such as a straightened paper
clip into the eject hole just to the right of the eject button.

Operating Basics

Manual release with the eject hole

User’s Manual 4-3

2. Grasp the drawer gently and pull until it is fully opened.

Pulling the drawer open

3. Place the disc, label side up, in the drawer.

Operating Basics

Inserting a disc

When the drawer is fully opened, the edge of the computer will extend
slightly over the disc tray. Therefore, you will need to turn the disc at an
angle when you place it in the tray. After seating the disc, however, make
sure it lies flat, as shown in the figure above.

User’s Manual 4-4

Operating Basics

■ Do not touch the laser lens. Doing so could cause misalignment.

■ Keep foreign matter from entering the drive. Check the back edge of

the tray to make sure it carries no debris before closing the drive.

4. Press gently at the centre of the disc until you feel it click into place. The
disc should lie below the top of the spindle, flush with the spindle base.

5. Push the center of the drawer to close it. Press gently until it locks into
place.

If the disc is not seated properly when the drawer is closed, the disc might
be damaged. Also, the drawer might not open fully when you press the
eject button.

Closing the disc drawer

User’s Manual 4-5

Removing discs

To remove the disc, follow the steps below and refer to the figure.

Do not press the eject button while the computer is accessing the disc
drive. Wait for the optical media drive indicator to go out before you open
the drawer. Also, if the disc is spinning when you open the drawer, wait for
it to stop before you remove it.

1. To pop the drawer partially open, press the eject button. Gently pull the
drawer out until it is fully opened.

■ When the drawer pops open slightly, wait a moment to make sure the

disc has stopped spinning before pulling the drawer fully open.

■ Turn off the power before you use the eject hole. If the disc is spinning

when you open the drawer, the disc could fly off the spindle and cause
injury.

2. The disc extends slightly over the sides of the drawer so you can hold it.
Hold the disc gently by its edges and lift it out.

Operating Basics

Removing a disc

3. Push the centre of the drawer to close it. Press gently until it locks into
place.

User’s Manual 4-6

Writing CDs with the DVD-ROM & CD-R/RW drive

Depending on the type of drive installed, you may be able to write CDs. The
DVD-ROM & CD-R/RW drive lets you read DVD-ROMs and CDs as well as
write CD-R/RW. Observe the precautions in this section to ensure the best
performance for writing CDs. For information on loading and unloading
CDs refer to the Using optical media drive section.

CD-R discs can be written only once. CD-RW discs can be rewritten many
times.

Important message

Before you write to CD-R/CD-RW disc or rewrite to CD-RW disc, read and
follow all setup and operating instructions in this section.

If you fail to do so, the DVD-ROM & CD-R/RW drive may not function
properly, and you may fail to write or rewrite, lose data or incur other
damage.

Before writing or rewriting

Please observe the following points when you write or rewrite the data.

■ We recommend the following manufacturers of CD-R and CD-RW

media. Media quality can affect write or rewrite success rates.

CD-R: TAIYO YUDEN Co., Ltd.

MITSUI Chemicals, Inc.
MITSUBISHI KAGAKU MEDIA CO, LTD.

Ricoh Co., Ltd.
Hitachi Maxell Ltd.

CD-RW: MITSUBISHI KAGAKU MEDIA CO, LTD.

Ricoh Co., Ltd.

* For the special media listed below, the following manufacturers are

recommended:

■ High-Speed CD-RW:

MITSUBISHI KAGAKU MEDIA CO, LTD., Ricoh Co., Ltd.

■ Ultra-Speed CD-RW:

MITSUBISHI KAGAKU MEDIA CO, LTD.

TOSHIBA has confirmed the operation of CD-R and CD-RW media of the
manufacturers above. Operation of other media cannot be guaranteed.

■ CD-RWs can generally be rewritten about 1,000 times. However, the

actual number of rewrites is affected by the quality of the media and the
way it is used.

■ Be sure to connect the AC adaptor when you write or rewrite.

■ Be sure to close all other software programs except the writing

software.

Operating Basics

User’s Manual 4-7

■ Do not run software such as a screen saver which can put a heavy load

on the CPU.

■ Operate the computer under the power scheme High Performance. Do

not use power-saving features.

■ Do not write while virus check software is running. Wait for it to finish,

then disable virus detection programs including any software that
checks files automatically in the background.

■ Do not use hard disk utilities, including those intended to enhance HDD

access speed. They may cause unstable operation and damage data.

■ Write from the computer's HDD to the CD. Do not try to write from

shared devices such as a LAN server or any other network device.

■ Writing with software other than TOSHIBA Disc Creator has not been

confirmed. Therefore, operation with other software cannot be
guaranteed.

When writing or rewriting

Note the following when you write or rewrite a CD-R or CD-RW.

■ Always copy data from the hard disk drive to the CD. Do not use cut-

and-paste as the original data will be lost if there is a write error.

■ Do not perform any of the following actions:

■ Change users in the Windows

■ Operate the computer for any other function, including use of a

mouse or TouchPad, closing/opening the LCD panel.

■ Start a communication application such as a modem.

■ Apply impact or vibration to the PC.

■ Install, remove or connect external devices, including the following:

PC Card, USB devices, external display, optical digital devices.

■ Open the optical media drive.

■ Do not use shut down/log off and sleep/hibernation while writing or

rewriting.

■ If the media is poor in quality, dirty or damaged, writing or rewriting

errors may occur.

■ Set the computer on a level surface and avoid places subject to

vibration such as airplanes trains, or cars. Do not use an unstable
surface such as a stand.

■ Keep mobile phones and other wireless communication devices away

from the computer.

®

Vista operating system.

Operating Basics

User’s Manual 4-8

Operating Basics

Disclaimer

TOSHIBA does not bear responsibility for the following:

■ Damage to any CD-R/RW disc that may be caused by writing or

rewriting with this product.

■ Any change or loss of the recorded contents of CD-R/RW disc that may

be caused by writing or rewriting with this product, or for any business
profit loss or business interruption that may be caused by the change or
loss of the recorded contents.

■ Damage that may be caused by using third party equipment or

software. Given the technological limitations of current optical disc
writing drives, you may experience unexpected writing or rewriting
errors due to disc quality or problems with hardware devices. Also, it is
a good idea to make two or more copies of important data, in case of
undesired change or loss of the recorded contents.

Writing CD/DVDs with the DVD Super Multi drive supporting DVD±R Double layer

Some models in this series are equipped with Writing CD/DVDs with the
DVD Super Multi drive (Supporting DVD±R Double Layer).

You can use the DVD Super Multi drive to write data to either CD-R/RW or
DVD-R/-RW/+R/+RW/-RAM discs. The following applications for writing are
preinstalled: TOSHIBA Disc Creator and TOSHIBA Direct Disc Writer.
InterVideo WinDVD Creator 2 Platinum, which is a product of InterVideo,
Inc.

Important message

Before you write or rewrite to CD-R/RW or DVD-R/-RW/+R/+RW/-RAM
discs, read and follow all setup and operating instructions in this section. If
you fail to do so, the DVD Super Multi drive may not function properly, and
you may fail to write or rewrite, lose data or incur other damage.

Before writing or rewriting

■ Based on TOSHIBA's limited compatibility testing, we suggest the

following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM
discs. However, in no event does TOSHIBA guarantee the operation,
quality or performance of any disc. Disc quality can affect write or
rewrite success rates.

CD-R: TAIYO YUDEN Co., Ltd.

MITSUBISHI KAGAKU MEDIA CO, LTD.
Ricoh Co., Ltd.

Hitachi Maxell Ltd.

CD-RW: MITSUBISHI KAGAKU MEDIA CO, LTD.

Ricoh Co., Ltd.

User’s Manual 4-9

Operating Basics

High Speed CD-RW: MITSUBISHI KAGAKU MEDIA CO, LTD.

Ricoh Co., Ltd.

Ultra Speed CD-RW: MITSUBISHI KAGAKU MEDIA CO, LTD.

DVD-R: DVD Specifications for Recordable disc for

General Version2.0

TAIYO YUDEN Co., Ltd.
Matsushita Electric Industrial Co., Ltd.

DVD-R(DL): MITSUBISHI KAGAKU MEDIA CO, LTD.
DVD+R: MITSUBISHI KAGAKU MEDIA CO, LTD.

Ricoh Co., Ltd.

DVD+R(DL): MITSUBISHI KAGAKU MEDIA CO, LTD.

DVD-RW: DVD Specifications for Recordable Disc for

Version 1.1 or 1.2

Victor Company of Japan, Ltd. (JVC)
MITSUBISHI KAGAKU MEDIA CO, LTD.

DVD+RW: MITSUBISHI KAGAKU MEDIA CO, LTD.
DVD-RAM: DVD Specifications for DVD-RAM Disc for

Version2.0, 2.1 or 2.2
Hitachi Maxell Ltd.
Matsushita Electric Industrial Co., Ltd.

This drive cannot use discs that allow writing of 8 speeds or more (DVD-R,
DVD+R, DVD+RW ), or 6 speeds or more (DVD-RW)

■ If the disc is poor in quality, dirty or damaged, writing or rewriting errors

may occur. Be careful to check the disc for dirt or damage before you
use it.

■ The actual number of rewrites to CD-RW, DVD-RW, DVD+RW or

DVD-RAM is affected by the quality of the disc and the way it is used.

■ There are two types of DVD-R discs: authoring and general use discs.

Do not use authoring discs. Only general use discs can be written to by
a computer drive.

■ We can support only Format1 of DVD-R DL. Therefore you cannot do

the additional writing. If your data is under 4.7GB, we suggest to use
DVD-R (SL) media.

■ You can use DVD-RAM discs that can be removed from a cartridge and

DVD-RAM discs designed without a cartridge. You can not use a disc
with a 2.6GB single-sided capacity and 5.2GB double-sided capacity.

■ Other DVD-ROM drives for computers or other DVD players may not be

able to read DVD-R/-RW or DVD+R/+RW discs.

■ Data written to a CD-R/DVD-R/DVD+R disc cannot be deleted either in

whole or in part.

User’s Manual 4-10

Operating Basics

■ Data deleted (erased) from a CD-RW, DVD-RW, DVD+RW and

DVD-RAM disc cannot be recovered. Check the content of the disc
carefully before you delete it. If multiple drives that can write data to
discs are connected, be careful not to delete data from the wrong drive.

■ In writing to a DVD-R/-RW, DVD+R/+RW or DVD-RAM disc, some disc

space is required for file management, so you may not be able to write
the full capacity of the disc.

■ Since the disc is based on the DVD standard, it might be filled with

dummy data if the written data is less than about 1 GB. Even if you write
only a small amount of data, it might take time to fill in the dummy data.

■ DVD-RAM formatted by FAT32 cannot be read in Windows

®

2000

without DVD-RAM Driver Software.

■ When multiple drives that can write data to discs are connected, be

careful not to write to the wrong drive.

■ Be sure to connect the AC adaptor before you write or rewrite.

■ Before you enter Sleep Mode/Hibernation Mode, be sure to finish

DVD-RAM writing. Writing is finished if you can eject DVD-RAM media.

■ Be sure to close all other software programs except the writing

software.

■ Do not run software such as a screen saver, which can put a heavy load

on the CPU.

■ Operate the computer under the power scheme High Performance. Do

not use power-saving features.

■ Do not write while virus check software is running. Wait for it to finish

and then disable virus detection programs including any software that
checks files automatically in the background.

■ Do not use hard disc utilities, including those intended to enhance HDD

access speed. They may cause unstable operation and data damage.

■ Write from the computer's hard disc drive to the CD/DVD. Do not try to

write from shared devices such as a LAN server or any other network
device.

■ Writing with software other than TOSHIBA Disc Creator is not

recommended.

When writing or rewriting

Please observe/consider the following when you write or rewrite to a
CD-R/RW, DVD-R/-RW/-RAM or DVD+R/+RW disc.

■ Do not perform any of the following actions when writing or rewriting:

■ Change users in the Windows® Vista operating system.

■ Operate the computer for any other function, including using a

mouse or TouchPad or closing/opening the LCD panel.

■ Start a communication application such as a modem.

■ Apply impact or vibration to the computer.

■ Install, remove or connect external devices, including the following:

PC Card, USB devices, external display, optical digital devices.

User’s Manual 4-11

■ Use the audio/video control buttons to reproduce music or voice.

■ Open the DVD Super Multi drive.

■ Do not use shut down/log off and Sleep Mode/Hibernation Mode while

writing or rewriting.

■ Make sure writing or rewriting is completed before going into Sleep

Mode/Hibernation Mode. Writing is completed if you can open the DVD
Super Multi drive tray.

■ Set the computer on a level surface and avoid places subject to

vibration such as airplanes, trains, or cars. Do not use an unstable
surface such as a stand.

■ Keep mobile phones and other wireless communication devices away

from the computer.

■ Always copy data from the hard disk drive to the CD-R/RW,DVD-R/

-RW/-RAM or DVD+R/+RW disc. Do not use cut-and-paste. The
original data will be lost if there is a write error.

Disclaimer

TOSHIBA does not bear responsibility for the following:

■ Damage to any CD-R/RW or DVD-R/-RW/+R/+RW/-RAM disc that may

be caused by writing or rewriting with this product.

■ Any change or loss of the recorded contents of CD-R/RW or DVD-R/

-RW/+R/+RW/-RAM disc that may be caused by writing or rewriting with
this product, or for any business profit loss or business interruption that
may be caused by the change or loss of the recorded contents.

■ Damage that may be caused by using third party equipment or

software. Given the technological limitations of current optical disc
writing drives, you may experience unexpected writing or rewriting
errors due to disc quality or problems with hardware devices. Also, it is
a good idea to make two or more copies of important data, in case of
undesired change or loss of the recorded contents.

Operating Basics

TOSHIBA Disc Creator

Note the following limitations when you use TOSHIBA Disc Creator:

■ DVD-Video cannot be created using TOSHIBA Disc Creator.

■ DVD-Audio cannot be created using TOSHIBA Disc Creator.

■ You cannot use the TOSHIBA Disc Creator "Audio CD" function to

record music to the DVD-R/-RW or DVD+R/+RW media.

■ Do not use the "Disc Backup" function of TOSHIBA Disc Creator to

copy

■ DVD-Video and DVD-ROM with copyright protection. DVD-RAM media

cannot be backed up with the "Disc Backup" function of TOSHIBA Disc
Creator.

■ You cannot back up a CD-ROM or CD-R/RW to DVD-R/-RW or

DVD+R/+RW using the "Disc Backup" function of TOSHIBA Disc
Creator.

User’s Manual 4-12

Operating Basics

■ You cannot back up DVD-ROM, DVD-Video or DVD-R/-RW or

DVD+R/+RW to CD-R/RW using TOSHIBA Disc Creator.

■ TOSHIBA Disc Creator cannot record in packet format.

■ You might not be able to use the Disc Backup function of TOSHIBADisc

Creator to backup a DVD-R/-RW or DVD+R/+RW disc that wasmade
with other software on a different DVD-R/-RW or DVD+R/+RW recorder.

■ If you add data to a DVD-R and DVD+R disc that you have already

recorded to, you might not be able to read the added data under some
circumstances. It cannot be read in 16-bit operating systems, such as
Windows 98SE and Windows ME, in Windows NT4 you will need
Service Pack 6 or later to read the data, and in Windows 2000 you will
need Service Pack 2 or later to read it. Some optical media drives
cannot read added data regardless of the operating system.

■ TOSHIBA Disc Creator does not support recording to DVD-RAM discs.

To record to a DVD-RAM, use Explorer or other similar utility.

■ When you back up a DVD disc, be sure the source drive supports

recording to DVD-R/-RW or DVD+R/+RW discs. If the source drive
does not support recording to DVD-R/-RW or DVD+R/+RW discs, it
might not be backed up correctly.

■ When you back up a DVD-R, DVD-RW, DVD+R or DVD+RW, be sure to

use the same type of disc.

■ You cannot partially delete any data written to a CD-RW, DVD-RW or

DVD+RW disc.

Data Verification

To verify that data is written or rewritten correctly, follow the steps below
before you write or rewrite a Data CD/DVD.

1. Display the setting dialog box by one of the following two steps:

■ Click the setting button ( ) for writing on the main toolbar in the

Data CD/DVD mode.

■ In the Settings menu, select Settings for Each Mode, then Data

CD/DVD.

2. Mark the Verify written data check box.

3. Select File Open or Full Compare mode.

4. Click the OK button.

User’s Manual 4-13

When Using Ulead DVD MovieFactory for TOSHIBA

How to make a DVD-Video

Simplified steps for making a DVD-Video from video data captured from a
DV-Camcorder:

1. Click Æ All Programs Æ DVD MovieFactory for TOSHIBA Æ
Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD
MovieFactory.

2. Insert a DVD-RW or DVD+RW disc in Burner.

3. Click Video Disc Æ Burn Video to Disc to launch Direct Recording
dialog box, choose DVD-Video/+VR to invoke Straight Capture to
Disc Page.

4. Choose DVD-Video format.

5. Confirm the capture source is DV.

6. Press Capture button.

Simplified steps for making a DVD-Video from adding video source:

1. Click Æ All Programs Æ DVD MovieFactory for TOSHIBA Æ
Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD
MovieFactory.

2. Click Video Disc Æ New Project to invoke 2
project type, then invoke DVD MovieFactory.

3. Add source from HD Disk by click Add Video files button to invoke
browser dialog box.

4. Choose the source video then go to Next page to apply Menu.

5. After choose the menu template, press Next button to go to Burning
Page.

6. Choose the output type then press Burn button.

nd

Launcher, choose your

Operating Basics

How to learn more about Ulead DVD MovieFactory

Please refer to the Help and Manual files for additional Ulead DVD
MovieFactory information.

Important information for use

Note the following limitations when you write Video DVD:

1. Editing digital video

■ Log in with Administrator rights to use DVD MovieFactory.

■ Make sure that your computer is running on AC power when using

DVD MovieFactory.

■ Operate the computer at Full Power. Do not use power-saving

features.

■ While you are editing DVD, you can display preview. However, if

another application is running the preview might not display
properly.

■ DVD MovieFactory cannot edit or play copy protected content.

User’s Manual 4-14

Operating Basics

■ Do not enter sleep or hibernation mode while using DVD

MovieFactory.

■ Do not operate DVD MovieFactory immediately after turning on the

computer. Please wait until all Disc Drive activity has stopped.

■ When recording to a DV-Camcorder, to ensure you capture all of

your data, let the camcorder record for a few seconds before you
begin recording your actual data.

■ CD recorder, JPEG functions, DVD-Audio, mini DVD and Video CD

functions are not supported in this version.

■ While recording video to DVD, please close all other programs.

■ Do not run software like a screen saver because it can put a heavy

load on the CPU.

■ Do not support mp3 decode and encode.

2. Before recording the video to DVD

■ When you record DVD disc, please use only discs recommended by

the Drive manufacturer.

■ Do not set the working drive to a slow device like a USB1.1 hard

disk drive or it will fail to write DVD.

■ Do not perform any of the following actions:

■ Operate the computer for any other function, including using a

mouse to TouchPad or closing/Opening the LCD panel.

■ Bump or cause vibration to the computer.

■ Use the Mode control button and Audio/Video control button to

reproduce music or voice.

■ Open the DVD drive.

■ Install, remove or connect external devices, including the

following: PC card, SD card, USB device, external display,
i.LINK. devices, optical digital devices.

■ Please verify your disc after recording important data.

■ DVD-R/+R/+RW disc cannot be written in VR format.

■ Not support to output VCD and SVCD format.

3. About Straight to Disc

■ Not support to record on DVD-R/+R disc

■ Not support to record DVD+VR format by HDV

■ HDV support to burn DVD-Video only

■ DVD-VR format not support to add Menu

4. About recorded DVDs

■ Some DVD-ROM drives for personal computers or other DVD

players may not be able to read DVD-R/+R/-RW/-RAM discs.

■ When playing your recorded disc on your computer, please use

WinDVD software application.

■ If you use an over-used rewritable disc, the full formatting might be

locked. Please use a brand new disc.

User’s Manual 4-15

Media care

This section provides tips on protecting data stored on your CD/DVDs.
Handle your media with care. The following simple precautions will

increase the lifetime of your media and protect the data stored on them:

CD/DVDs

1. Store your CD/DVDs in the container they came in to protect them and
keep them clean.

2. Do not bend the CD/DVD.

3. Do not write on, apply a sticker to, or otherwise mar the surface of the
CD/DVD that contains data.

4. Hold the CD/DVD by its outside edge or the edge on the centre hole.
Fingerprints on the surface can prevent the drive from properly reading
data.

5. Do not expose to direct sunlight, extreme heat or cold. Do not place
heavy objects on your CD/DVDs.

6. If your CD/DVDs become dusty or dirty, wipe them with a clean dry
cloth. Wipe from the centre out, do not wipe in a circular direction
around the CD/DVD. If necessary, use a cloth dampened in water or a
neutral cleaner. Do not use benzine, thinner or similar cleaner.

Sound System

Operating Basics

This section describes audio controls including sound levels and power
management.

Volume Mixer

The Volume Mixer utility lets you control the audio volume for playback of
devices and applications under Windows.

■ To launch the Volume Mixer utility, right click on the speaker icon on

the taskbar, and select Open Volume Mixer from the sub menu.

■ To adjust the volume level of speakers or headphones, move the

Speakers slider.

■ To adjust the volume level of an application that you are using, move

the slider for the corresponding application.

Microphone Level

Follow the steps below to change the microphone recording level.

1. Right click on the speaker icon on the taskbar, and select Recording
Devices from the sub menu.

2. Select Microphone, and click Properties.

3. On the Levels tab move the Microphone slider to increase or decrease
the microphone volume level.

User’s Manual 4-16

PC Beep Level

Modem

Region selection

Operating Basics

Follow the steps below to change the PC Beep playback level.

1. Right click on the speaker icon on the taskbar, and select Playback
Devices in the sub menu.

2. Select Speakers, and click Properties.

3. On the Levels tab move the PC Beep slider to increase or decrease the
PC Beep volume level.

This section describes how to connect and disconnect the internal modem
to and from a telephone jack.

The internal modem does not support voice functions. All data and fax
functions are supported.

■ In case of a lightning storm, unplug the modem cable from the

telephone jack.

■ Do not connect the modem to a digital telephone line. A digital line will

damage the modem.

Telecommunication regulations vary from one region to another, so you will
need to make sure the internal modem's settings are correct for the region
in which it will be used.

To select a region, follow the steps below.

1. Click start, point to All Programs, TOSHIBA, Networking, and click
Modem Region Select.

Do not use the Country/Region Select function in the Modem setup utility
in the Control Panel if the function is available. If you change the Country/
Region in the Control Panel, the change may not take effect.

2. The Region Selection icon will appear in the Task Bar. Click the icon
with the primary mouse button to display a list of regions that the
modem supports. A sub menu for telephony location information will
also be displayed. A check will appear next to the currently selected
region and telephony location.

3. Select a region from the region menu or a telephony location from the
sub-menu.

■ When you click a region it becomes the modem's region selection,

and the New Location for telephony will be set automatically.

■ When you select a telephony location, the corresponding region is

automatically selected and it becomes the modem's current region
setting.

User’s Manual 4-17

Properties menu

Click the icon with the secondary mouse button to display properties menu
on the screen.

Settings

You can enable or disable the following settings:

AutoRun Mode

The Region Select utility starts automatically when you start up the
operating system.

Open the Dialing Properties dialog box after selecting
region.

The dialing properties dialog box will be displayed automatically after you
select the region.

Location list for region selection.

A submenu appears displaying location information for telephony.

Open dialog box, if the modem and Telephony Current
Location region code do not match.

A warning dialog box is displayed if current settings for region code and
telephony location are incorrect.

Operating Basics

Modem Selection

If the computer cannot recognize the internal modem, a dialog box is
displayed. Select the COM port for your modem to use.

Dialing Properties

Select this item to display the dialing properties.

If you are using the computer in Japan, the Telecommunications Business
Law requires that you select Japan region mode. It is illegal to use the
modem in Japan with any other selection.

Connecting

To connect the modem cable, follow the steps below.

■ The modular cable that comes with the computer must be used to

connect a modem. Connect the end of the modular cable with the core
to the computer.

■ In case of a lightning storm, unplug the modem cable from the

telephone jack.

■ Do not connect the modem to a digital telephone line. A digital line will

damage the modem.

User’s Manual 4-18

Operating Basics

1. Plug one end of the modular cable into the modem jack.

2. Plug the other end of the modular cable into a telephone jack.

Connecting the internal modem

Do not pull on the cable or move the computer while the cable is
connected.

If you use a storage device such as an optical drive or hard disk drive
connected to a 16-bit PC Card, you might experience the following modem
problems:

■ Modem speed is slow or communication is interrupted.

■ Skips may occur in sound.

Disconnecting

To disconnect the internal modem cable, follow the steps below.

1. Pinch the lever on the connector in the telephone jack and pull out the
connector.

2. In the same way, pull the cable’s other connector out of the computer.

Wireless communications

The computer’s wireless communication function supports both Wireless
LAN and Bluetooth devices.

Only some models are equipped with both Wireless LAN and Bluetooth
functions.

User’s Manual 4-19

■ Do not use the Wireless LAN (Wi-Fi) or Bluetooth functionalities near a

microwave oven or in areas subject to radio interference or magnetic
fields. Interference from a microwave oven or other source can disrupt
Wi-Fi or Bluetooth operation.

■ Turn Wi-Fi and Bluetooth functionalities off when near a person who

may have a cardiac pacemaker implant or other medical electric
device. Radio waves may affect pacemaker or medical device
operation, possibly resulting in serious injury. Follow the instruction of
your medical device when using any Wi-Fi or Bluetooth functionality.

■ Always turn off Wi-Fi or Bluetooth functionality if the computer is near

automatic control equipment or appliances such as automatic doors or
fire detectors. Radio waves can cause malfunction of such equipment,
possibly resulting in serious injury.

■ It may not be possible to make a network connection to a specified

network name using the ad hoc network function.
If this occurs, the new network(*) will have to be configured for all
computers connected to the same network in order to re-enable
network connections.
* Please be sure to use new network name.

Wireless LAN

The Wireless LAN feature is not available on all models. Where present, it
supports the B and G standard but it is compatible with other LAN systems
based on Direct Sequence Spread Spectrum/Orthogonal Frequency
Division Multiplexing radio technology that complies with IEEE802.11
Wireless LAN standard.

■ Automatic Transmit Rate Select mechanism in the transmit range of 54,

48, 36, 24, 18, 12, 9 and 6 Mbit/s. (IEEE 802.11g)

■ Automatic Transmit Rate Select mechanism in the transmit range of 11,

5.5, 2 and 1 Mbit/s. (IEEE 802.11b)

■ Roaming over multiple channels

■ Card Power Management

■ Wired Equivalent Privacy (WEP) data encryption, based on the 128 bit

encryption algorithm.

■ Advanced Encryption Standard (AES) data encryption, based on 128 bit

encryption algorithm.

Operating Basics

Wake-up on LAN does not function on a Wireless LAN.

Security

■ Be sure to enable the encryption function otherwise you may expose

your computer to illegal access by an outsider across the Wireless LAN
which may cause intrusion, eavesdropping, and the loss or destruction
of stored data. TOSHIBA strongly recommend the customer to enable
the encryption function.

User’s Manual 4-20

■ TOSHIBA is not liable for the eavesdropping of data due to the use of

Wireless LAN and the damage thereof.

Wireless communication switch

You can enable or disable the Wireless LAN function with the on/off switch.
No transmissions are sent or received when the switch is off. Slide the
Switch to turn it on and turn it off.

Set the switch to off in airplanes and hospitals. Check the indicator. It will
stop glowing when the wireless communication function is off.

Wireless communication indicator

The wireless communication indicator indicates the status of the wireless
communication functions.

Indicator status Indication

Indicator off Wireless communication switch is set to off.

Automatic power down because of overheating.
Power malfunction

Indicator glows Wireless communication switch is on. Wireless

LAN is turned on by an application.

If you used the Task Bar to disable Wireless LAN, you will need to restart
the computer to re-enable it. Alternatively, you can also follow this
procedure:

1. In the Control Panel, click System and Maintenance.

2. Click the Device Manager. The Device Manager window opens. Click
Network Adapters.

3. Select your preferred Network Adapter, then click the Enable button in
the tool bar.

Operating Basics

LAN

The computer has built-in support for Ethernet LAN (10 megabits per
second, 10BASE-T) and Fast Ethernet LAN (100 megabits per second,
100BASE-TX). This section describes how to connect/disconnect to a LAN.

LAN cable types

The computer must be configured properly before connecting to a LAN.
Logging onto a LAN using the computer's default settings could cause a
malfunction in LAN operation. Check with your LAN administrator
regarding set-up procedures.

If you are using Fast Ethernet LAN (100 megabits per second,
100BASE-TX), be sure to connect with a CAT5 cable or higher. You cannot
use a CAT3 cable.

User’s Manual 4-21

If you are using Ethernet LAN (10 megabits per second, 10BASE-T), you
can connect with a CAT3 cable or higher.

Connecting LAN cable

To connect the LAN cable, follow the steps below.

1. Turn off the power to the computer and to all external devices
connected to the computer.

2. Plug one end of the cable into the LAN jack. Press gently until you hear
the latch click into place.

Connecting the LAN cable

3. Plug the other end of the cable into a LAN hub connector. Check with
your LAN administrator before connecting to a hub.

Disconnecting LAN cable

To disconnect the LAN cable, follow the steps below.

1. Pinch the lever on the connector in the computer's LAN jack and pull
out the connector.

2. Disconnect the cable from the LAN hub in the same manner. Check
with your LAN administrator before disconnecting from the hub.

Operating Basics

Cleaning the computer

To help ensure long, trouble-free operation, keep the computer free of dust
and use care with liquids around the computer.

■ Be careful not to spill liquids into the computer. If the computer does get

wet, turn the power off immediately and let the computer dry completely
before you turn it on again.

■ Clean the computer using a slightly damp (with water) cloth. You can

use glass cleaner on the display. Spray a small amount of cleaner on a
soft, clean cloth and wipe the screen gently with the cloth.

Never spray cleaner directly onto the computer or let liquid run into any
part of it. Never use harsh or caustic chemical products to clean the
computer.

■ Remove the dust from the cooling vents on the Left side of the

computer regularly with a vacuum cleaner. Refer to Chapter 2, The

Grand Tour, Left side.

User’s Manual 4-22

Moving the computer

The computer is designed for rugged durability. However, a few simple
precautions taken when moving the computer will help ensure trouble-free
operation.

■ Make sure all disc activity has ended before moving the computer.

Check the disc indicator on the computer.

■ If a CD/DVD is in the drive, remove it. Also make sure the drawer is

securely closed.

■ Turn off the power to the computer.

■ Disconnect the AC adaptor and all peripherals before moving the

computer.

■ Close the display. Do not pick up the computer by its display panel.

■ Use the carrying case when transporting the computer.

■ When carrying your computer, be sure to hold it securely so that it does

not fall or hit anything.

■ Do not carry your computer by holding protruded portions.

Operating Basics

Protruded portion

User’s Manual 4-23

The Keyboard

The computer's keyboard layouts are compatible with a 101/102-key
enhanced keyboard. By pressing some keys in combination, all the 101/
102-key keyboard functions can be executed on the computer.

The number of keys on your keyboard depends on which country/region’s
keyboard layout your computer is configured with. Keyboards for numerous
languages are available.

There are six types of keys: typewriter keys, keypad overlay, function keys,
soft keys, Windows

Typewriter keys

The typewriter keys produce the upper- and lower-case letters, numbers,
punctuation marks, and special symbols that appear on the screen.

There are some differences, however, between using a typewriter and
using a computer keyboard:

■ Letters and numbers produced in computer text vary in width. Spaces,

which are created by a "space character," may also vary depending on
line justification and other factors.

■ The lowercase l (el) and the number 1 (one) are not interchangeable on

computers as they are on a typewriter.

■ The uppercase O (oh) and the 0 (zero) are not interchangeable.

■ The Caps Lock function key locks only the alphabetic characters in

uppercase while the shift lock on a typewriter places all keys in the
shifted position.

■ The Shift keys, the Tab key, and the BackSpace key perform the same

function as their typewriter counterparts but also have special computer
functions.

Chapter 5

®

special keys, and cursor control keys.

User’s Manual 5-1

F1 ... F12 function keys

The function keys (not to be confused with Fn) are the 12 keys at the top of
your keyboard. These keys function differently from other keys.

F1 through F12 are called function keys because they execute
programmed functions when pressed. Used in combination with the Fn key,
keys marked with icons execute specific functions on the computer. Refer
to the section, Soft keys: Fn key combinations, in this chapter. The function
executed by individual keys depends on the software you are using.

Soft keys: Fn key combinations

The Fn (function) is used in combination with other keys to form soft keys.
Soft keys are key combinations that enable, disable or configure specific
features.

Some software may disable or interfere with soft-key operations. Soft-key
settings are not restored by the Sleep Mode feature.

Emulating keys on enhanced keyboard

The Keyboard

A 101-key enhanced keyboard layout

The keyboard is designed to provide all the features of the 101-key
enhanced keyboard, shown in figure above. The 101/102-key enhanced
keyboard has a numeric keypad and scroll lock key. It also has additional
Enter and Ctrl keys to the right of the main keyboard. Since the keyboard
is smaller and has fewer keys, some of the enhanced keyboard functions
must be simulated using two keys instead of one on the larger keyboard.

Your software may require you to use keys that the keyboard does not
have. Pressing the Fn key and one of the following keys simulates the
enhanced keyboard's functions.

Press Fn + F11 to access the integrated keypad. When activated, the keys
with gray markings on the bottom edge become numeric keypad keys.
Refer to the Keypad overlay section in this chapter for more information on
how to operate these keys. The power on default for both settings is off.

Press Fn + F12 to lock the cursor on a specific line. The power on default is
off.

User’s Manual 5-2

Hot keys

The Keyboard

Mute:Turns the volume on and off.

Lock: Enters "Lock computer" mode. To restor your desktop, you need to

log on again.

Power plan: Displays the power save modes and lets you change the
power settings.

Sleep: This hot key switches the system to Sleep Mode.

Hibernate:This hot key switches the system to Hibernate mode.

Output: Changes the active display device.

Default resolution for simultaneous mode is set to 1024 × 768. If you
connect an RGB (Monitor) that is not 1024 × 768 resolution, change it in
"Display Properties".

Brightness (decreases): Turns the monitor brightness down.

Brightness (increases): Turns the monitor brightness up.

User’s Manual 5-3

The Keyboard

Wireless: Switches the active wireless devices if the wireless
communication switch is switched on.

Touch Pad: Enables or disables the Touch Pad function.

Zoom: Changes the display resolution.

TOSHIBA Zooming Utility (reduce): Reduces the icon size on the

desktop or the font size within one of the supported application windows.

TOSHIBA Zooming Utility (enlarge): Increases the icon size on the
desktop or the font size within one of the supported application windows.

Before using Fn + 1 and Fn + 2, you must install the TOSHIBA Zooming
Utility. The Utility only supports the following application windows:
Microsoft Internet Explorer, Microsoft Office, Windows Media Player,
Adobe Reader and the icons on the desktop.

Volume decrease: Press Fn + Down to decrease the sound volume. After
you press this hot key an icon showing the new setting will be displayed for
two seconds.

Volume increase: Press Fn + Up to increase the sound volume. After you
press this hot key an icon showing the new setting will be displayed for
two seconds.

Fn Sticky key

You can use the TOSHIBA Accessibility Utility to make the Fn key sticky,
that is, you can press it once, release it, and then press an "F number" key.
To start the TOSHIBA Accessibility Utility, click start, point to All
Programs, point to TOSHIBA, point to Utilities and click Accessibility.

User’s Manual 5-4

Windows® special keys

The Keyboard

The keyboard provides two keys that have special functions in Windows® :
Windows
key, has the same function as the secondary mouse button.

This key activates the Windows® start menu.

This key has the same function as the secondary mouse button.

Keypad overlay

Your computer's keyboard does not have an independent numeric keypad,
but its numeric keypad overlay functions like one.

The keys in the centre of the keyboard with gray letters make up the
numeric keypad overlay. The overlay provides the same functions as the
numeric keypad on the 101/102-key enhanced keyboard described
previously.

Turning on the overlays

The numeric keypad overlay can be used for numeric data input.

Numeric mode

To turn on the Numeric mode, press Fn + F11. Now try numeric data entry
using the keys in the following figure. Press Fn + F11 again to turn off the
overlay.

®

logo key activates the start menu and the other, the application

The numeric keypad overlay

User’s Manual 5-5

Temporarily using normal keyboard (overlay on)

While using the overlay, you can temporarily access the normal keyboard
without turning off the overlay:

1. Hold Fn and press any other key. All keys will operate as if the overlay
were off.

2. Type upper-case characters by holding Fn + Shift and pressing a
character key.

3. Release Fn to continue using the overlay.

Generating ASCII characters

Not all ASCII characters can be generated using normal keyboard
operation. But, you can generate these characters using their ASCII codes.

With the overlay on:

1. Hold down Alt.

2. Using the overlay keys, type the ASCII code.

3. Release Alt, and the ASCII character appears on the display screen.

With the overlay off:

1. Hold down Alt + Fn.

2. Using the overlay keys, type the ASCII code.

3. Release Alt + Fn, and the ASCII character appears on the display
screen.

The Keyboard

User’s Manual 5-6

Chapter 6

Power and Power-Up Modes

The computer's power resources include the AC adaptor and internal
batteries. This chapter gives details on making the most effective use of
these resources including charging and changing batteries, tips for saving
battery power, and power up modes.

Power conditions

The computer's operating capability and battery charge status are affected
by the power conditions: whether an AC adaptor is connected, whether a
battery is installed and what the charge level is for the battery.

Table Power conditions

Universal
AC adaptor
connected

Battery fully
charged

Battery partially
charged or no
charge

No battery
installed

Power on Power off

• Operates

• LED: Battery green

• Operates

• Quick Charge

• LED: Battery orange

• Operates

• No charge

• LED: Battery off

(no operation)

• LED: Battery green

• Quick charge

• LED: Battery orange

• No charge

• LED: Battery off

User’s Manual 6-1

Universal
AC adaptor
not
connected

Battery charge is
above low battery
trigger point

Battery charge is
below low battery
trigger point

Battery charge is
exhausted

No Battery
installed

Power indicators

As shown in the above table, the Battery and Power indicators on the
system indicator panel alert you to the computer’s operating capability and
battery charge status.

Battery indicator

Check the Battery indicator to determine the status of the battery pack.
The following indicator lights indicate the battery status:

Flashing orange The battery charge is low. The AC adaptor must

Orange Indicates the AC adaptor is connected and

Green Indicates the AC adaptor is connected and the

No light Under any other conditions, the indicator does

Power and Power-Up Modes

Table Power conditions

Power on Power off

(no operation)

• Operates

• LED: Battery off

• Operates

• LED: Battery flashes orange

Computer shuts down

• Cannot operates

• LED: Battery off

be connected to recharge the battery.

charging the battery.

battery is fully charged.

not light.

If the battery becomes too hot while it is being charged, the charge will
stop and the battery indicator will go out. When the battery’s temperature
falls to a normal range, charge will resume. This occurs whether the
computer's power is on or off.

User’s Manual 6-2

Power indicator

Check the Power indicator to determine the power status:

Green Indicates power is being supplied to the

Blinking orange Indicates power is being supplied to the

No light Under any other conditions, the indicator does

Battery types

The computer has the following batteries:

■ Battery pack (2000mAh)

■ Real Time Clock (RTC) battery

■ The battery pack is a lithium ion battery, which can explode if not

■ Do not remove the battery pack while the computer is in Sleep Mode.

Power and Power-Up Modes

computer and the computer is turned on.

computer while the computer is in Sleep Mode.
The indicator turns on for one second and off for
two seconds.

not light.

properly replaced, used, handled or disposed of. Dispose of the battery
as required by local ordinances or regulations. Use only batteries
recommended by TOSHIBA as replacements.

Data is stored in RAM, so if the computer loses power it will be lost.
When the computer is powered off in Sleep Mode, and the AC adaptor
is not connected, the main battery pack supplies power to maintain
data and programs in memory. If the battery pack is completely
discharged, Sleep Mode does not function and the computer loses all
data in memory.

Battery pack

When the AC adaptor is not connected, the computer's main power source
is a removable lithium ion battery pack, also referred to in this manual as
the main battery. You can purchase additional battery packs for extended
use of the computer away from an AC power source.

Before you remove the battery pack, set the computer to Hibernation Mode
or save your data and shut down the computer. Do not change the battery
pack while the AC adaptor is connected.

User’s Manual 6-3

Power and Power-Up Modes

Battery pack

To ensure that the battery pack maintains its maximum capacity, operate
the computer on battery power at least once a month until the battery pack
is fully discharged. Refer to Extending battery life in this chapter for
procedures. If the computer is continuously operated on AC power through
an AC adaptor for an extended period, more than a month, the battery may
fail to retain a charge. It may not function efficiently over the expected life of
the battery and the Battery indicator may not indicate a low-battery
condition.

Real Time Clock battery

The Real Time Clock (RTC) battery provides power for the internal real
time clock and calendar. It also maintains the system configuration.

If the RTC battery becomes completely discharged, the system loses this
data and the real time clock and calendar stop working.

The computer's RTC battery is a lithium ion battery and should be replaced
only by your dealer or by a TOSHIBA service representative. The battery
can explode if not properly replaced, used, handled or disposed of.
Dispose of the battery as required by local ordinances or regulations.

■ You can change the settings of the Real Time Clock by pressing F2 in

POST.

■ After configuring the time and date for the Real Time Clock battery, we

recommend that you turn the power status of your computer to "ON" so
that the Real Time Clock battery is charged. Refer to Chapter 9

Troubleshooting, for details.

If the following message is displayed on the LCD:

ERROR 0271: Check date and time settings.

WARNING 0251: System CMOS checksum bad-Default
configuration used.
Press [F1] to resume, [F2] to setup.

User’s Manual 6-4

The charge in the RTC battery is getting low or has been exhausted. You
will need to set the date and time within the BIOS setup using the following
steps:

1. Press F2 key - the BIOS setup screen will be displayed.

2. Set the date in System Date.

3. Set the time in System Time.

4. Press F10 key. Confirmation message will appear.

Press Enter key. BIOS setup will terminate and the computer will be
rebooted.

After configuring the date and time it is recommended that you switch the
computer on and then leave it in this state so that the Real Time Clock
battery can be charged.

Care and use of the battery pack

The battery pack is a vital component of portable computing. Taking proper
care of it will help ensure longer operating time on battery power as well as
a longer life for your battery pack. Follow the instructions in this section
carefully to ensure safe operation and maximum performance.

Safety precautions

Mishandling of batteries can cause death, serious injury or property
damage. Carefully observe the following advisories:

Danger: Indicates an imminently hazardous situation, which could result in
death or serious injury, if you do not follow instructions.

Warning: Indicates a potentially hazardous situation, which could result in
death or serious injury, if you do not follow instructions.

Caution: Indicates a potentially hazardous situation, which if not avoided,
may result in moderate or minor injury or property damage.

Note: Provides important information.

Power and Power-Up Modes

Danger

1. Never try to dispose of the battery pack by burning or expose it to a
heating device such as a microwave oven. The battery pack could
explode and cause bodily injury.

2. Never try to disassemble, repair or otherwise tamper with a battery
pack. The battery pack will overheat and ignite. Leakage of caustic
alkaline solution or other electrolytic substances will cause fire or injury,
possibly resulting in death or serious injury.

3. Never short-circuit the battery pack by contacting the terminals with a
metal object. A short-circuit can cause fire or otherwise damage the
battery pack and possibly cause injury. To avoid accidental short-circuit,
always wrap the battery pack in plastic and cover the terminals with
electrical tape when storing or disposing of the battery pack.

User’s Manual 6-5

Power and Power-Up Modes

4. Never puncture the battery pack with a nail or other sharp object. Never
strike it with a hammer or other object. Never step on it.

5. Never try to charge the battery pack in any manner other than that
described in the User's manual. Never connect the battery pack to a
plug socket or to an automobile’s cigarette lighter socket. It may rupture
or ignite.

6. Use only the battery pack supplied with the computer or other device or
a battery pack approved by the computer or device’s manufacturer.
Battery packs have different voltages and terminal polarities. Use of an
improper battery could cause smoke, fire or rupture of the battery pack.

7. Never subject a battery pack to heat, such as storage near a heat
source. Exposure to heat can cause the battery pack to ignite, explode
or leak caustic liquid and cause death or serious injury. It could also fail
or malfunction causing data loss.

8. Never expose the battery pack to abnormal shock, vibration or
pressure. The battery pack’s internal protective device will fail, causing
it to overheat, explode, ignite or leak caustic liquids possibly resulting in
death or serious injury.

9. Never let a battery pack become wet. A wet battery pack will overheat,
ignite or rupture possibly resulting in death or serious injury.

Warning

1. Never allow caustic electrolyte fluid leaked from a battery pack to
contact your eyes, skin or clothing. If caustic electrolyte fluid should
contact your eyes, immediately wash your eyes with large amounts of
running water and seek medical attention, to help prevent eye damage.
If electrolyte fluid should contact your skin immediately wash it under
running water to prevent rash. If it contacts your clothes, promptly
remove them to prevent the fluid from contacting your skin or eyes.

2. Immediately turn off the power, disconnect the AC adaptor and remove
the battery if any of the following events are observed in the battery
pack: offensive or unusual odor, excessive heat, discoloration or
deformation. Never use the computer again until it has been checked
by a TOSHIBA service provider. It might generate smoke or fire, or the
battery pack might rupture.

3. Make sure the battery is securely installed in the computer before
attempting to charge the battery pack. Improper installation could
generate smoke or fire, or cause the battery pack to rupture.

4. Keep the battery pack out of reach of infants and children. It can cause
injury.

User’s Manual 6-6

Power and Power-Up Modes

Caution

1. Never continue to use a battery pack after its recharging capacity has
become impaired, or after the display of a warning message indicating
that the battery pack’s power is exhausted. Continued use of an
exhausted or impaired battery pack could cause the loss of data.

2. Never dispose of battery packs with normal trash. Bring them to your
TOSHIBA dealer or to another recycling centre to save resources and
prevent environmental damage. Cover the terminals with electrical tape
to prevent short-circuits, which could cause the battery pack to ignite or
rupture.

3. Use only battery packs recommended by TOSHIBA as replacements.

4. Always make sure the battery pack is installed correctly and securely.
Otherwise, a battery pack could fall out and possibly cause injury.

5. Charge the battery pack only in an ambient temperature between 5 and
35 degrees Celsius. Otherwise, the electrolyte solution might leak,
battery pack performance might deteriorate and the battery life might be
shortened.

6. Be sure to monitor the remaining battery power. If the battery pack and
real time clock battery discharge completely, Sleep Mode will not
function and data in memory will be lost. Also, the computer might
register an incorrect time and date. In this case, connect the
AC adaptor to recharge the batteries.

7. Never install or remove the battery pack without first turning off the
power and disconnecting the AC adaptor. Never remove the battery
pack while the computer is in Suspend or Sleep Mode. Data will be lost.

Note

1. Never remove the battery pack while the Wake-up on LAN function is
enabled. Data will be lost. Before you remove a battery pack, disable
the Wake-up on LAN function.

2. After the battery pack is charged, avoid leaving the AC adaptor
connected and the computer turned off for more than a few hours at a
time. Continuing to charge a fully-charged battery pack can damage the
battery.

Charging the batteries

When the power in the battery pack becomes low, the Battery indicator
flashes orange indicating that only a few minutes of battery power remain.
If you continue to use the computer while the Battery indicator flashes, the
computer enables Hibernation Mode (so you don't lose data) and
automatically turns off.

You must recharge a battery pack when it becomes discharged.

Procedures

To recharge a battery pack while it is installed in the computer, connect the
AC adaptor to the DC IN 19V jack and plug the other end into a working
outlet.

User’s Manual 6-7

Power and Power-Up Modes

The Battery indicator glows orange when the battery is being charged.

Use only the computer connected to an AC power source to charge the
battery pack. Never attempt to charge the battery pack with any other
charger.

Time

The following table shows the approximate time required to fully charge a
discharged battery.

Charging time (hours)

Battery type Power on Power off

Battery pack About 6 or longer About 3
RTC battery About 24 Doesn't charge

The charging time when the computer is on is affected by ambient
temperature, the temperature of the computer and how you use the
computer. If you make heavy use of external devices, for example, the
battery might scarcely charge at all during operation. Refer also to the
section Maximizing battery operating time.

Battery charging notice

The battery may not charge right away under the following conditions:

■ The battery is extremely hot or cold. If the battery is extremely hot, it

might not charge at all. To ensure the battery charges to its full capacity,
charge the battery at room temperature of 10° to 30°C (50° to 88°F).

■ The battery is nearly completely discharged. Leave the AC adaptor

connected for a few minutes and the battery should begin charging.

The Battery indicator may show a rapid decrease in battery operating time
when you try to charge a battery under the following conditions:

■ The battery has not been used for a long time.

■ The battery has completely discharged and been left in the computer for

a long time.

■ A cool battery is installed in a warm computer.

In such case, follow the steps below.

1. Fully discharge the battery by leaving it in the computer with the power
on until the power automatically shuts off.

2. Plug in the AC adaptor.

3. Charge the battery until the Battery indicator glows green.

Repeat these steps two or three times until the battery recovers normal
capacity.

User’s Manual 6-8

Power and Power-Up Modes

Leaving the AC adaptor connected will shorten battery life. At least once a
month, run the computer on battery power until the battery is fully
discharged, then recharge the battery.

Monitoring battery capacity

Remaining battery power can be monitored using the following methods.

■ Clicking the battery icon on the task bar

■ Via the Windows Mobility Center window

■ Wait at least 16 seconds after turning on the computer before trying to

monitor the remaining operating time. The computer needs this time to
check the battery's remaining capacity and to calculate the remaining
operating time, based on the current power consumption rate and
remaining battery capacity. The actual remaining operating time may
differ slightly from the calculated time.

■ With repeated discharges and recharges, the battery’s capacity will

gradually decrease. Therefore, an often used, older battery will not
operate for as long as a new battery even when both are fully charged.

Maximizing battery operating time

A battery’s usefulness depends on how long it can supply power on a
single charge.

How long the charge lasts in a battery depends on:

■ CPU processing speed (Depends on the model you purchased)

■ Screen brightness

■ Cooling method (Depends on the model you purchased)

■ System Sleep Mode

■ System Hibernation

■ Monitor power off

■ How often and how long you use the hard disk, optical disc.

■ How much charge the battery contained to begin with.

■ How you use optional devices, such as a PC Card, to which the battery

supplies power.

■ Enabling Sleep Mode conserves battery power if you are frequently

turning the computer off and on.

■ Where you store your programs and data.

■ Closing the display when you are not using the keyboard saves power.

■ Operating time decreases at low temperatures.

■ The condition of the battery terminals. Make sure the battery terminals

stay clean by wiping them with a clean dry cloth before installing the
battery pack.

User’s Manual 6-9

Power and Power-Up Modes

Retaining data with power off

When you turn off your computer with fully charged batteries, the batteries
retain data for the following approximate time periods.

Battery pack About 1 days (Sleep Mode)

About 30 days (Boot mode)

RTC battery 30 days

Extending battery life

To maximize the life of your battery pack:

■ At least once a month, disconnect the computer from a power source

and operate it on battery power until the battery pack fully discharges.
Before doing so, follow the steps below.

1. Turn off the computer's power.

2. Disconnect the AC adaptor and turn on the computer's power. If it

does not turn on go to step 4.

3. Operate the computer on battery power for five minutes. If the

battery pack has at least five minutes of operating time, continue
operating until the battery pack is fully discharged. If the Battery
indicator flashes or there is some other warning to indicate a low
battery, go to step 4.

4. Connect the AC adaptor to the computer and the power cord to a

power outlet. The Battery indicator should glow orange to indicate
that the battery pack is being charged. If the Battery indicator does
not glow, power is not being supplied. Check the connections for the
AC adaptor and power cord.

5. Charge the battery pack until the Battery indicator glows green.

■ If you have extra battery packs, rotate their use.

■ If you will not be using the system for an extended period, more than

one month, remove the battery pack.

■ Store spare battery packs in a cool dry place out of direct sunlight.

Replacing the battery pack

When the battery pack reaches the end of its operating life you will need to
install a new one. The life of the battery pack is generally about 500
recharges. If the Battery indicator flashes orange shortly after fully
recharging the battery, the battery pack needs to be replaced.

You might also replace a discharged battery pack with a charged spare
when you are operating your computer away from an AC power source.
This section explains how to remove and install the battery pack.

User’s Manual 6-10

Power and Power-Up Modes

Removing the battery pack

To replace a discharged battery, follow the steps below.

■ When handling battery packs, do not short-circuit the terminals. Also do

not drop, hit or otherwise apply impact; do not scratch or break the
casing and do not twist or bend the battery pack.

■ Do not remove the battery pack while the computer is in Sleep Mode.

Data is stored in RAM, so if the computer loses power it will be lost.

■ In Hibernation Mode, data will be lost if you remove the battery or

disconnect the AC adaptor before the save is completed. Wait for the
Built-in HDD indicator to go out.

■ Do not touch the latch while holding the computer. Or you may get

injured by the dropped battery by unintentional release of the latch.

1. Save your work.

2. Turn the computer's power off. Make sure the Power indicator is off.

3. Remove all cables connected to the computer.

4. Turn the computer upside down.

5. Slide and hold the battery release latch (2) to free the battery pack after
moving the battery release lock (1) into its unlock position - then slide
the battery pack out of the computer.

Battery pack

Battery Release

Latch (2)

Battery
Release
Lock (1)

Releasing the battery pack

User’s Manual 6-11

Power and Power-Up Modes

Installing the battery pack

To install a battery, follow the steps below.

■ The battery pack is a lithium ion battery, which can explode if not

properly replaced, used, handled or disposed of. Dispose of the battery
as required by local ordinances or regulations. Use only batteries
recommended by TOSHIBA as replacements.

■ Do not touch the latch while holding the computer. Or you may get

injured by the dropped battery by unintentional release of the latch.

1. Turn the computer's power off.

2. Disconnect all cables connected to the computer.

3. Insert the battery pack.

4. Ensure the battery release lock (1) is moved into its locked position.

Battery pack

Battery

Release
Lock (1)

Securing the battery pack

Starting the computer by password

To start up the computer with the user password, follow these steps:

1. Turn on the power as described in Chapter 3, Getting Started. The
following message appears:

Password=

At this point, the hotkeys Fn + F1 to F9 do not work. They will function after
you enter the password.

2. Enter the password.

3. Press Enter.

If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.

User’s Manual 6-12

Power-up modes

The computer has the following power-up modes:

■ Boot Mode: Computer shuts down without saving data. Always save

your work before you turn the computer off in boot mode.

■ Hibernation Mode: Data in memory is saved to the hard disk.

■ Sleep Mode: Data is maintained in the computer's main memory.

Refer also to the sections Turning on the power and Turning off the power
in Chapter 3, Getting Started.

Hot keys

You can use hot keys Fn + F3 to enter Sleep Mode and Fn + F4 to enter
Hibernation Mode. Refer to Chapter 5, The Keyboard of your online manual
for details.

Panel power off/on

You can set up your computer so that power turns off automatically when
you close the display panel. When you open the panel, power turns on in
Sleep Mode or Hibernation Mode but not in boot mode.

Power and Power-Up Modes

If the panel power off function is enabled and you use Shut down
Windows
completed.

®

, do not close the display until the shut down function is

System Auto Off

This feature turns the system off automatically if it is not used for a set
duration. The system shuts down in Sleep Mode or Hibernation Mode in
Windows®.

User’s Manual 6-13

HW Setup

This chapter explains how to use TOSHIBA HW Setup program to
configure your computer. TOSHIBA HW Setup lets you configure settings
for General, Password, Display, Boot Priority, Keyboard, LAN, and USB.

Accessing HW Setup

To run HW Setup, click , All Programs, TOSHIBA, Utilities, HWSetup.

HW Setup Window

The HW Setup window contains the following tabs: General, Password,
Display, Boot Priority, Keyboard, USB and LAN.

There are also these three buttons:

OK Accepts your changes and closes the HW Setup

Cancel Closes the window without accepting your

Apply Accepts all your changes without closing the HW

Chapter 7

window.

changes.

Setup window.

General

This window displays the BIOS version and contains two buttons:

Default Return all HW Setup values to the factory

settings.

About Display the HW Setup version.

User’s Manual 7-1

HW Setup

Setup

This field displays BIOS Version and date.

Password

This tab allows you to set or reset the user password for power on.

User Password

Lets you register a new password or un-register an existing password.

Not Registered Un-registers an existing password
Registered Register a new password by following the on

screen instructions

Owner String

This blank field is used to display a message when the password field is
displayed on startup. If a password is not registered the message will not
be shown. The maximum length is 256 characters.

Display

This tab lets you customize your computer's display settings for either the
internal LCD screen or for an external monitor.

Power On Display

Lets you select the display to be used when the computer is booted (This
setting is only available on Standard VGA mode and not available on
Windows® Desktop).

Auto-Selected Selects an external monitor if one is connected.

Otherwise, it selects the internal LCD (Default).

LCD + Analog RGB Selects both the internal LCD and external

monitor for simultaneous display.

Boot Priority

Boot Priority Options

This option sets the priority for booting the computer.
To select the boot drive you want, follow the steps below.

1. Boot-up your computer and press F12 to enter the boot menu.

2. The boot select screen will be displayed: Hard disk Drive, CD/DVD,
FDD and LAN.

3. Use the upper/lower cursor keys to highlight the boot device you want
and apply.

User’s Manual 7-2