• Designed for non-proprietary hardward
and IT infrastructures
• Record up to 16 IP-based cameras
• Cameras need not be onsite to record
• Cost-effective solution to traditional DVRs
• Records image resolutions as high as the
IP Camera supports
• Complete remote management; Setup
control, user administration, video backup,
live viewing, and search capabilities
SW-IP NETWORK VIDEO RECORDING SOFTWARE
REQUIREMENTS
Processor Pentium D Pentium D
Memory 512 MB DDR 1 GB DDR
Memory (w/POS)*1 GB DDR 1 GB DDR
Storage space based on video retention needs
Video card 8x 128 MB VGA 8x 128 MB VGA
Video outputSVGA MonitorSVGA Monitor
Network connection100 MB1000 MB
Operating system Windows XP® or 2003 Server®
Removable storage CD-RW, DVD-RW, 3.5” Floppy Drive
Audio output Microsoft compatible sound card and speakers
SOFTWARE
Video input 8 Network Cameras 16 Network Cameras
Recording rateUp to 480 PPS Up to 480 PPS
PTZ controlYesYes
Image sizes DeterminedDetermined
Password control User DefinedUser Defined
Upgradeable 1 Channel Upgrade(s)-* NOTE: Minimum memory is 1GB for software if using POS devices.
SURVEILLIX POS SOFTWARE
Software provides complete record of customer, cashier and merchandise
purchased with text overlaid on video. POS/ATM data is stored on Surveillix
DVR for access and search using several criteria. Below is a list of POS
devices that are supported by Surveillix POS software. Please regularily
check for the most current list by visiting www.toshibasecurity.com.
• AVE (VSI-PRO)*• Aloha
• AVE (VSSI-PRO for ATM)*• POSitouch
• VeriFone (Ruby/Sapphire)• PC Based POS (RS-232)
• Vardells • HAT (Honeywell Text Inserter)
• SIDG• TEC
* A Cable 078 from AVE required for POS/ATM software integration
Toshiba America Information Systems, Inc.
Surveillance & IP Video Products Group
9740 Irvine Boulevard
Irvine, CA 92618 877-855-1349
www.toshibasecurity.com
CanSecMaestro, SmartLock
Dice SystemsAegis
DSXWinDSX, WinDSX-SQL, DSX-Soft I/O
GalaxyGalaxy Version 7 and Version 4
Hartmann Controls Protector Series
KeyscanKeyscan Management System VII,
MAXxessAXXess, EndPoint
INTEGRATION PLATFORMS SUPPORTED
CerniumPerceptrak
Vidient SmartCatch
MANAGEMENT SYSTEM SOFTWARE
INTEGRATION – TOSHIBA IP CAMERAS
MilestoneXProtect, RemoteManager
OnSSINetDVMS, NetDVR, NetGuard, ProSight
GenetecOmnicast, Synergist, Autovu
ControlWareCWare Prime
Broadware
Strand USA
IP Video Corp.Dynaview
Video Protein
For updates on compatibility please visit the Toshiba website:
www.toshibasecurity.com
Video Server Digital Encoders and
Decoders are an easy way to
access video over the Internet. Take
up to 4 analog cameras and stream
video to a centralized server for
recording.
• 1 and 4 Channel Units Available (4-ch encoder only)
• Embedded Linux operating system
• MPEG-4 Compression
• Wireless B and G with Wireless Encryption
• Pre- and Post-Alarm Recording
• Supports Dynamic IP and Dynamic DNS Addresses
• Up to 4 Sensor Inputs / Outputs
• Remote Operation and Configuration
• Up to 120 PPS Real Time Display
• Supports PAN / TILT / ZOOM Cameras
• Dual-stream Technology (Supports two simultaneous
video streams)
• Compatible with most major IP device manufacturers
NE-VS100E Encoder
One Channel MPEG-4 encoder features 32 bit RISC 200 MHz CPU, 704 x
480, 352 x 240/288 resolution
(PAL/NTSC), 32MB SDRAM and Flash
Memory.
NE-VS104E Encoder
Four Channel MPEG-4 encoder features 32 bit RISC 200 MHz CPU, 704 x
480, 352 x 240/288 resolution
(PAL/NTSC), 32MB SDRAM and Flash
Memory.
NE-VS100EW (Wireless)
One Channel Wireless MPEG-4
encoder features 32 bit RISC 200 MHz
CPU, 704 x 480, 352 x 240/288 resolution (PAL/NTSC), 32MB SDRAM and
Flash Memory. 802.11 a/b/g 54 MBps
NE-VS104EW (Wireless)
Four Channel Wireless MPEG-4
encoder features 32 bit RISC 200 MHz
CPU, 704 x 480, 352 x 240/288 resolution (PAL/NTSC), 32MB SDRAM and
Flash Memory. 802.11 a/b/g 54 MBps
NE-VS100D
One Channel video decoder makes it
easy to convert digital video back to
analog for display on a standard security monitor, and has the ability to output via either S-Video or BNC. Features
audio out, LAN connectivity, no signal
detection, USB 2.0 port, NTSC/PAL,
RS485 and PTZ communication. 32MB
Flash and 32MB SDRAM memory.
Toshiba LSA and P56QHD displays provide the reliability
required to withstand 24-hour continuous operation. The
long-life backlight and a rugged aluminum cabinet
assures excellent heat dissipation, along with lower power
consumption so the displays can work longer at a lower
cost. The fanless design also enables quiet operation.
LSA SERIES MONITORS
26” (P26LSA), 32” (P32LSA), 42” (P42LSA),
47” (P46LSA), 52” (P52LSA)
26”-32”:1366 x 768, 42” - 52”: 1920 x 1080
<130W (26”), <150W (32”), <250W (42”),
P26: 26.1” x 16.18” x 3.23” P32 : 31.1” x 18.9” x 3.2”
P47: 45.3” x 27.25” x 4.98” P52 : 50” x 29” x 5”
480p, 720p (all models), 1080i (P42, P47, P52)
AC cord, manual, stand, remote, cables: 15-pin
RGB, S-video, YCbCr, RCA, DVI-D, RGB-YcbCr
Note 1: 26”, 32” monitors support 640 x 480,800 x 600,
1024 x 768, 1366 x 768, 1280 x 1024 (compressed),
1600 x 1200 (compressed) input. The 42”, 47”and 52”
support all of above, plus 1280 x 1024, 1920 x 1080 input
signals. LSA monitors are RoHS compliant.
Super MVA TFT
16.77
6.5ms
26”-47”: 550cd/M2, 52”: 500cd/M
26”-47”: 1000:1, 52”: 2000:1
176° (H), 176° (V)
AC100-240V (±10%)
50/60 Hz
<350W (47”), <400W (52”)
<20W (all models)
P42: 40.18” x 24.15” x 4.1”
P26: 33 lbs, P32: 43 lbs, P42: 77 lbs,
P47: 128 lbs, P52 : 131lbs
41°F to 140°F
Yes (up to 6 x 6)
D-Sub 15 pin
DVI-D
RCA x 1
S-video DIN
8 pin DIN with RCA breakout
--
RS232C (except P26LSA)
NTSC, PAL
VGA, SVGA, XGA, SXGA
VESA DPMS/DVI DMPM
Power, input, menu, down, up, +
RJ45 (except P26LSA)
VESA
3 year full replacement (shipping 1 way)
HD-SDI Interface
2
P56QHD MONITORS
P56QHD-2: 56” (Dual DVI x 2)
P56QHD-4: 56”(Single DVI x 4)
Super MVA TFT
3840 x 2160 (0.324 mm pixel)
16.77
6.5ms
500cd/M
1200:1
176° (H), 176° (V)
AC100-240V (±10%)
50/60 Hz
<550W
<20W
P56QHD-2: 52.8” x 31.4” x 5.2”
P56QHD-4: 52.8” x 31.4” x 5.2”
P56QHD-2: 154 lbs
P56QHD-4: 154 lbs
41°F to 140°F
No
--
Single DVI x 4 (P56HD-4)
--
--
--
Dual DVI x 2 (P56HD-2)
RS232C
NTSC, PAL
--
1080i (x4)
VESA DPMS/DVI DMPM
--
RJ45
VESA
AC cord, DVI-D cable, dual stand, manual
ATI QFHD 3D Graphic Card (PCI Express x 16)
Note 1: The Dual DVI version of the P56QHD (P56QHD-2) is
optimal for picture files and motion picture files. The Single
DVI x 4 channel model (P56QHD-4) is for 3840 x 2160 full
motion video when used with a media converter or process
and HDD. P56QHS monitors are RoHS compliant.
3 year
P56QHD
Dual DVI
ATI QFHD
3D Graphic Card
PC or
Workstation
P56QHD
DVI x 4ch
Media Converter
or Processor
2
USE FOR VIDEO OR STILL IMAGE FILES
4K HDD
Recorder
The Dual DVI version of the P56QHD (P56QHD-2) is
optimal for picture files and motion picture files. The
Single DVI x 4 channel model (P56QHD-4) is ideal for
3840 x 2160 full motion video when used with a media
converter or process and HDD.
WIDE 176° VIEWING ANGLE
Toshiba LSA and P56QHD displays have viewing
angles that are 176 degrees both vertically and
horizontally, providing sharp, clear, high contrast
images even viewed at a wide angle.
SLIM BODY
Toshiba displays feature a unique design that is flat
and compact. The displays come with VESA mounting holes that allow use of any commercial ceiling
mount or wall mount.
Page 4
Toshiba Digital Video Recorders (Windows® XP Embedded)