Toshiba G40 User Manual

Download

Page 1

User’s Manual

Qosmio G40

computers.toshiba-europe.com

Page 2

Qosmio G40

Disclaimer

© 2007 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.

TOSHIBA Qosmio G40 Portable Personal Computer User’s Manual

First edition May 2007 Copyright authority for music, movies, computer programs, databases and

other intellectual property covered by copyright laws belongs to the author or to the copyright owner. Copyrighted material can be reproduced only for personal use or use within the home. Any other use beyond that stipulated above (including conversion to digital format, al teration, transfer of copied material and distribution on a network) without the permission of the copyright owner is a violation of copyright or author’s rights and is subject to civil damages or criminal action. Please comply with copyright laws in making any reproduction from this manual.

Please note that you may infringe the owner’s rights protected by the copyright laws if you use the screen mode switching functions (e.g. Wide mode, Wide Zoom mode, etc.) of this product to display enlarged images/video at coffee shops or hotels for the purposes of profits or providing these to the public.

This manual has been validated and reviewed for accuracy. The instructions and descriptions it contains are accurate for the TOSHIBA Qosmio G40 Portable Personal Computer at the time of this manual’s production. However, succeeding computers and manuals are subject to change without notice. TOSHIBA assumes no liability for damages incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manual.

ii User’s Manual

Page 3

T rademarks

IBM is a registered trademark and IBM PC is a trademark of International Business Machines Corporation.

Intel, Intel SpeedStep, Intel Core, Celeron and Centrino are trademarks or registered trademarks of Intel Corporation.

Windows and Microsoft are registered trademarks and Windows Vista is a trademark of Microsoft Corporation.

Photo CD is a trademark of Eastman Kodak. Bluetooth is a trademark or registered trademark owned by its proprietor

and used by TOSHIBA under license. Memory Stick is a registered trademark and i.LINK is a trademark of Sony

Corporation. DVD MovieFactory is a registered trademarks of Ulead Systems, Inc. Manufactured under license from Dolby Laboratories.

EdgeMotion, PalmCheck, TouchPad and Synaptics are trademarks or registered trademarks of Synaptics Incorporated.

Other trademarks and registered trademarks not listed above may be used in this manual.

Qosmio G40

Macrovision License

This product includes copyright protection technology and intellectual property that are patented in the U.S. and other countries. These patents are the property of Macrovision Corporation. The use of copyright protection must be authorized by Macrovision Corporation. It is intended for home and other restricted-use applications, unless Macrovision Corporation expressly authorizes otherwise. All forms of reverse engineering or decompiling are forbidden.

EU Declaration of Conformity

This product is carrying the CE-Mark in accordance with the related European Directives. The party responsible for CE-Marking is TOSHIBA Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany.

The complete and official EU Declaration of Confirmity can be found on TOSHIBA´s web site http://epps.toshiba-teg.com on the Internet.

User’s Manual iii

Page 4

Qosmio G40

GOST

Important Safety Information for Computers with TV tuner

IEC60950-1/EN60950-1 Information technology equipment - Safety Coaxial cable connection to this computer must only be used if the cable

outer conductive shielding has been grounded by the cable installer at the building premises as close to the point of cable entrance, or attachment, as practicable and the connection complies with all local cable installation requirements that are applicable in your area.

Modem warning notice

Conformity Statement

The equipment has been approved to [Commission Decision “CTR21”] for pan-European single terminal connection to the Public Switched Telephone Network (PSTN).

However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.

In the event of problems, you should contact your equipment supplier in the first instance.

iv User’s Manual

Page 5

Network Compatibility Statemen t

This product is designed to work with, and is compatible with the following networks. It has been tested to and found to conform with the additional requirements conditional in EG 201 121.

Germany ATAAB AN005,AN006,AN007,AN009,AN010

and DE03,04,05,08,09,12,14,17 Greece ATAAB AN005,AN006 and GR01,02,03,04 Portugal ATAAB AN001,005,006,007,011 and

P03,04,08,10 Spain ATAAB AN005,007,012, and ES01 Switzerland ATAAB AN002 All other countries/regions ATAAB AN003,004

Specific switch settings or software setup is required for each network, please refer to the relevant sections of the user guide for more details.

The hookflash (timed break register recall) function is subject to separate national type approvals. It has not been tested for conformity to national type regulations, and no guarantee of successful operation of that specific function on specific national networks can be given.

Following information is only for E U-member states:

The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Qosmio G40

This symbol may not stick depending on the country and region where you purchased.

User’s Manual v

Page 6

Qosmio G40

Optical disc drive safety instructions

Be sure to check the international precautions at the end of this section.

TOSHIBA

HD DVD-ROM drive TS-L802A

■ The HD DVD-ROM drive employs a laser system. To ensure proper

use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.

■ Use of controls, adjustments or the performance of procedures other

than those specified may result in hazardous radiation exposure.

■ To prevent direct exposure to the laser beam, do no t try to open the

enclosure.

vi User’s Manual

Page 7

TOSHIBA

HD DVD-R drive SD-L902A

■ The HD DVD-R drive employs a laser system. T o ensure proper use of

this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.

■ Use of controls, adjustments or the performance of procedures other

than those specified may result in hazardous radiation exposure.

■ To prevent direct exposure to the laser beam, do not try to open the

enclosure.

Qosmio G40

User’s Manual vii

Page 8

Qosmio G40

International precautions

CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.” T o prevent direct exposure to the laser beam, do not try to open the enclosure.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS RADIAT ION EXPOSURE.

viii User’s Manual

Page 9

Preface General Precautions

Chapter 1 Introduction

Equipment checklist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Special features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12

TOSHIBA Value Added Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14

Utilities and Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15

Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-17

Chapter 2 The Grand Tour

Front with the display closed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Left side. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Right side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Back. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Underside . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

Front with the display open. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

System indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12

Optical disc drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

AC adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

Chapter 3 Getting Started

Connecting the AC adaptor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Opening the display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Turning on the power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Starting up for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Turning off the power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Restarting the computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

System Recovery Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10

Qosmio G40

User’s Manual ix

Page 10

Qosmio G40

Chapter 4

Operating Basics

Using the Touch Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1

AV Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2

Using the Fingerprint Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3

Web Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-11

Using HD DVD-ROM drive and HD DVD-R drives . . . . . . . . . . . . . . .4-12

HD DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-16

Writing CD/DVD/HD DVDs on HD DVD-R drives . . . . . . . . . . . . . . . .4-17

Media care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-27

TV Tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-28

Sound system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-30

Modem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-32

Wireless communications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-36

LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-40

Cleaning the computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-42

Moving the computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-42

Chapter 5 The Keyboard

Typewriter keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1

Function keys: F1 … F12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-2

Soft keys: FN key combinations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-2

Hot keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-3

Windows special keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-5

Keypad overlay. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6

Generating ASCII characters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7

Chapter 6 Power

Power conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-1

Power indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2

Battery types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-4

Care and use of the battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-6

Replacing the battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-11

TOSHIBA Password Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-13

Starting the computer by password. . . . . . . . . . . . . . . . . . . . . . . . . .6-14

Power-up modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-15

Panel power on/off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-16

System Auto Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-16

Chapter 7 HW Setup & BIOS Setup

Accessing HW Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-1

HW Setup window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-1

BIOS Setup Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-7

x User’s Manual

Page 11

Qosmio G40

Chapter 8

A V functions

Media Center. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

Front operation panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

Qosmio AV Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4

Remote Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5

Using the Remote Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

Installing/Removing batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10

Set-top box Connection Method and Watching TV on

the Media Center. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12

Connecting the Video devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15

Chapter 9 Optional Devices

PC Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2

ExpressCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4

Bridge media slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-6

Memory expansion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11

Battery Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-15

Universal AC Adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-15

Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-16

USB floppy disk drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-16

External monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-18

TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-19

HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-21

S-Video-in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-22

i.LINK (IEEE1394). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-23

Security lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-25

Chapter 10 Troubleshooting

Problem solving process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1

Hardware and system checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3

TOSHIBA support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-26

Chapter 11 Legal Footnotes

Appendix A Specifications

Physical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Appendix B Display Controller and Video modes

Display controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

Video modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

Appendix C Wireless LAN

Card Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1

Radio Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1

Supported Frequency Sub-bands. . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2

Appendix D Bluetooth wireless technology Interoperability

Bluetooth wireless technology and your Health. . . . . . . . . . . . . . . . D-2

Regulatory statements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-2

User’s Manual xi

Page 12

Qosmio G40

Appendix E

AC Power Cord and Connectors

Certification agencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-1

Appendix F Usage Restrictions

Appendix G If your computer is stolen

Glossary Index

xii User’s Manual

Page 13

Preface

Congratulations on your purchase of the Qosmio G40 series computer. This powerful notebook computer provides excellent expansion capability, includes multimedia functionality, and is designed to provide years of reliable, high-performance computing.

This computer family includes a model with a built-in TV tuner. When you wish to display a TV program or play CD/DVD with this model before Windows starts, touch the TV panel or the CD/DVD panel (or the same panels on the remote control) respectively during Windows startup. When Windows is running, you can display or record a TV program using the My TV feature of Media Center.

This manual tells how to set up and begin using your Qosmio G40 computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.

If you are a new user of computers or if you’re new to portable computing, first read over the Introduction and The Grand Tour chapters to familiarize yourself with the computer’s features, components and accessory devices. Then read Getting Started for step-by-step instructions on setting up your computer.

If you are an experienced computer user, please continue reading the preface to learn how this manual is organized, then become acquainted with this manual by browsing through its pages. Be sure to read the Special

features section of the Introduction, to learn about features that are

uncommon or unique to this computer, as well as the section on HW Setup

& BIOS Setup, to understand how to setup and config ure these features.

If you are going to install PC Cards or connect external devices such as a monitor, be sure to read Chapter 9, Optional Devices.

Qosmio G40

User’s Manual xiii

Page 14

Qosmio G40

Conventions

This manual uses the following formats to describe, identify, and highlight terms and operating procedures.

Abbreviations

On first appearance, and whenever necessary for clarity, abbreviations are enclosed in parentheses following their definition. For example: Read Only Memory (ROM). Acronyms are also defined in the Glossary.

Icons

Icons identify ports, dials, and other parts of your computer. The indicator panel also uses icons to identify the components it is providing information on.

Keys

The keyboard keys are used in the text to describe many computer operations. A distinctive typeface identifies the key top symbols as they appear on the keyboard. For example, ENTER identifies the ENTER key.

Key operation

Some operations require you to simultaneously use two or more keys. We identify such operations by the key top symbols separated by a plus sign (+). For example, CTRL + C means you must hold down CTRL and at the same time press C. If three keys are used, hold down the first two and at the same time press the third.

ABC

When procedures require an action such as clicking an icon or entering text, the icon’s name or the text you are to type in is represented in the typeface you see to the left.

Display

xiv User’s Manual

ABC

Names of windows or icons or text generated by the computer that appear on its display screen are presented in the type face you see to the left.

Page 15

Messages

Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below.

Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment.

Please read. A note is a hint or advice that helps you make best use of your equipment.

Indicates a potentially hazardous situation, which could result in death or serious injury, if you do not follow instructions.

Terminology

This term is defined in this document as follows:

Qosmio G40

Start

The word “Start” refers to the “ ” button in Microsoft

Windows Vista™.

User’s Manual xv

Page 16

Qosmio G40

xvi User’s Manual

Page 17

General Precautions

TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer.

Be certain to read the general precautions below and to note the cautions included in the text of the manual.

Creating a computer-friendly environment

Place the computer on a flat surface that is large enough for the computer and any other items you are using, such as a printer.

Leave enough space around the computer and other equipment to provide adequate ventilation. Otherwise, they may overheat.

To keep your computer in prime operating condition, prote c t your work area from:

■ Dust, moisture, and direct sunlight.

■ Equipment that generates a strong electromagnetic field, such as

stereo speakers (other than speakers that are connected to the computer) or speakerphones.

■ Rapid changes in temperature or humidity and sources of temperature

change such as air conditioner vents or heaters.

■ Extreme heat, cold, or humidity.

■ Liquids and corrosive chemicals.

Qosmio G40

Stress injury

Carefully read the Instruction Manual for Safety and Comfort. It contains information on the prevention of stress injuries to your hands and wrists that can be caused by extensive keyboard use. Instruction Manual for Safety and Comfort also includes information on work space design, posture and lighting that can help reduce physical stress.

User’s Manual xvii

Page 18

Qosmio G40

Heat injury

■ Avoid prolonged physical contact with the computer. If the computer is

used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury.

■ If the computer has been used for a long time, avoid direct contact with

the metal plate supporting the various interface ports as this can become hot.

■ The surface of the AC adaptor can become hot when in use but this

condition does not indicate a malfunction. If you need to transport the AC adaptor, you should disconnect it and let it cool before moving it.

■ Do not lay the AC adaptor on a material that is sensitive to heat as the

material could become damaged.

Pressure or impact dama ge

Do not apply heavy pressure to the computer or subject it to any form of strong impact as this can damage the computer’s components or otherwise cause it to malfunction.

PC Card overheating

Some PC Cards can become hot during prolonged use which may result in errors or instability in the operation of the device in question. In addition, you should also be careful when you remove a PC Card that has been used for a long time.

Mobile phones

Please be aware that the use of mobile phones can interfere with the audio system. The operation of the computer will not be impaired in any way, but it is recommended that a minimum distance of 30cm is maintained between the computer and a mobile phone that is in use.

Instruction Manual for Safety and Comfort

All important information on the safe and proper use of this computer is described in the enclosed Instruction Manual for Safety and Comfort. Be sure to read it before using the computer.

xviii User’s Manual

Page 19

Cooling

Qosmio G40

1. Clean any dust accumulated on the computer’s cooling vents.

The cooling vents are located on the back and underside of the computer.

When you use your computer in a dusty area, dirt and debris may accumulate on the cooling vents at the under side of your unit. If this occurs, the accumulated dust can cause insufficient heat dissipation which may result in the computer shutting down during use. Carefully clean the dust from the vents using a vacuum cleaner.

2. Cooling vents on the underside and back of the computer.

Cooling vents

Speaker (subwoofer)

Cooling vents

The above illustration is of the subwoofer equipped model. Models without the subwoofer have cooling vents in the subwoofer location pictured above. Models with the subwoofer do not have cooling vents in the subwoofer location pictured above.

User’s Manual xix

Page 20

Qosmio G40

Cooling vents

To prevent possible overheating of the CPU, make sure the cooling fan’s air intake is not blocked. The fan draws in air by creating a vacuum. If the fan is blocked, it could cause the CPU to run at a lower performance level or cause the computer to shut down. Loose items such as notebook and tissue paper, plastic wrappers, or other similar materials can block the air intake, preventing air from reaching the CPU. Do not use the computer on surfaces with objects that can be drawn in by the cooling fan.

xx User’s Manual

Page 21

Introduction

This chapter provides an equipment checklist, and it identifies the computer’s features, options and accessories.

Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA.

Equipment checklist

Carefully unpack your computer, taking care to save the box and packaging materials for future use.

Hardware

Check to make sure you have all the following items:

■ Qosmio G40 Portable Personal Computer

■ AC adaptor and power cord (2-pin plug or 3-pin plug)

■ Battery pack (Is pre-installed in some computer)

■ Modular cable (optional)

■ VIDEO-IN cable

■ HDMI OUT cable

■ DVB-T Antenna (optional)

■ Remote Controller

■ Infrared transmitter cable

■ Two AA manganese batteries (for Remote Controller)

Qosmio G40

Chapter 1

User’s Manual 1-1

Page 22

Qosmio G40

Software

Documentation

The following Windows® operating system and utility software are pre-installed.

■ Microsoft

Windows Vista™

■ TOSHIBA Value Added Package

■ Ulead DVD MovieFactory

■ Fingerprint Utility

■ Windows Mobility Center

■ TOSHIBA Disc Creator

■ TOSHIBA ConfigFree

■ TOSHIBA Assist

■ TOSHIBA SD Memory Utilities

■ CD/DVD Drive Acoustic Silencer

■ TOSHIBA Password Utility

■ TOSHIBA HD DVD PLAYER

Please refer to the included Qosmio HD DVD Guide for more information on using the TOSHIBA HD DVD PLAYER.

■ Qosmio G40 Portable Personal Computer User’s Manual

■ Qosmio G40 Quickstart

■ Qosmio G40 HD DVD Guide

■ Microsoft® Windows Vista™ Quickstart Guide (provided with some

models)

■ Instruction Manual for Safety and Comfort

■ Warranty information

If any of the items are missing or damaged, contact your dealer immediately.

Backup media

■ Product Recovery DVD-ROM

1-2 User’s Manual

Page 23

Hardware

Qosmio G40

This section describes the hardware of your computer. The actual specifications may vary depending on the model you

purchased.

Processor

Built-in The computer is equipped with one of the

following Intel

■ Intel

incorporates 2MB Level-2 cache memory and supports Enhanced Intel

processor.

Core™ 2 Duo Processor, which

SpeedStep®

Technology.

■ Intel

Core™ 2 Duo Processor, which incorporates 4MB Level-2 cache memory and supports Enhanced Intel

SpeedStep®

Technology.

Some models in this series use Intel® Centrino® Duo processor technology which is based on three separate components, the Intel processor, Intel

PRO/Wireless network connection and the Mobile Intel®

Core™ 2 Duo

965 Express Chipset family.

Legal Footnote (CPU)*1

For more information on the CPU, please refer to the Legal Footnotes section in Chapter 11 or Click the *1 above.

Memory

Slots 512, 1,024 or 2,048MB memory modules can be

installed in the computer’s two memory slots for a maximum of 4,096MB system memory.

This computer can be equipped with memory modules of a maximum size of 4,096MB. The actual amount of useable system memory will be less than the installed memory modules.

User’s Manual 1-3

Page 24

Qosmio G40

Video RAM The amount of Video RAM available is

dependent on the computer’s system memory.

Start -> Control Panel -> Appearance and Personalization -> Personalization -> Display Settings.

The amount of Video RAM can be verified by clicking the Advanced Settings... button in the Display Settings window.

Legal Footnote (Memory (Main System))*2

For more information regarding Memory (Main System), please refer to the

Legal Footnotes section in Chapter 1 1 or click the *2 above.

Power

Battery pack The computer is powered by one rechargeable

lithium-ion battery pack.

Legal Footnote (Battery Life)*3

For more information regarding Battery Life, please refer to the Legal

Footnotes section in Chapter 11 or click the *3 above.

RTC battery The internal RTC battery backs up the Real Time

AC adaptor The AC adaptor provides power to the system

Clock and calendar.

and recharges the batteries when they are low. It comes with a detachable power cord which will either have a 2-pin or 3-pin plug enclosure.

As the AC adaptor is universal, it can receive a range of AC voltages from 100 to 240 volts, however you should note that the output current varies among different models. Using the wrong adaptor can damage your computer. Refer to the

AC adaptor section in Chapter 2, The Grand Tour.

1-4 User’s Manual

Page 25

Disks

Qosmio G40

Hard disk drive The following 6 types of hard disk drives can be

installed in this computer. The capacity of each hard disk drive model is different.

■ 80.0 billion bytes (74.53 GB)

■ 100.0 billion bytes (93.16 GB)

■ 120.0 billion bytes (111.79 GB)

■ 160.0 billion bytes (149.05 GB)

■ 200.0 billion bytes (186.32 GB)

■ 250.0 billion bytes (232.90 GB)

Two computer models are available, a model with a single hard disk drive and a model with two hard disk drives.

Please note that part of the hard disk drive’s overall capacity is reserved as administration space.

Legal Footnote (Hard Disk Drive (HDD) Capacity)*4

For more information regarding Hard Disk Drive (HDD) Capacity, please refer to the Legal Footnotes section in Chapter 11 or click the *4 above.

User’s Manual 1-5

Page 26

Qosmio G40

Optical disc drive

HD DVD-ROM drive Some models are equipped with a full-size HD

DVD-ROM drive module that lets you run CD’s or DVD’s without using an adaptor. The drive reads DVD-ROM’s at a maximum 8x speed and CD-ROM’s at a maximum 24x speed, and HD DVD’s at a maximum 1x speed and writes CD-R’s at up to 16x speed, CD-RW’s at up to 10x speed, DVD-R’s and DVD+R’s at up to 4x speed, DVD-RW’s and DVD+RW’s at up to 4x speed, DVD-R (Dual layer) at up to 2x speed, DVD+R (Double Layer) at up to 2.4x speed and DVD-RAM at up to 3x speed, and supports the following formats:

■ CD-R

■ CD-RW

■ DVD-ROM

■ DVD-Video

■ CD-DA

■ CD-Text

■ Photo CD™ (single/multi-session)

■ CD-ROM Mode 1, Mode 2

■ CD-ROM XA Mode 2 (Form1, Form2)

■ Enhanced CD (CD-EXTRA)

■ Addressing Method 2

■ DVD-R

■ DVD-R (Dual Layer)

■ DVD-RW

■ DVD+R

■ DVD+R (Double Layer)

■ DVD+RW

■ DVD-RAM

■ HD DVD-ROM

1-6 User’s Manual

Page 27

Qosmio G40

HD DVD-R drive Some models are equipped with a full-size

HD DVD-R drive module that lets you run CD’s or DVD’s without using an adaptor.

The drive reads DVD-ROM’s at a maximum 8x speed and CD-ROM’s at a maximum 24x speed, and HD DVD’s at a maximum 1x speed and writes CD-R’s at up to 16x speed, CD-RW’s at up to 10x speed, DVD-R’s and DVD+R’s at up to 4x speed, DVD-RW’s and DVD+RW’s at up to 4x speed, DVD-R (Dual layer) at up to 2x speed, DVD+R (Double Layer) at up to 2.4x speed and DVD-RAM at up to 3x speed, HD DVD-R at up to 1x speed, and supports the following formats in addition to HD DVD-ROM drive:

■ HD DVD-R

The optical drive installed on this computer cannot write multiple sessions on HD DVD-R Dual Layer disc sessions. Once a disc has been written to once, it will be finalized. Once finalized, no further writing to the disc will be possible regardless of what portion of the total disc capacity was used.

Legal Footnote (General HD DVD technology and playback)

For more information regarding the General HD DVD technology and playback, please refer to the Legal Footnotes section in Chapter 11 or click the *5 above.

Display

The computer’s internal display panel supports high-resolution video graphics and can be set to a wide range of viewing angles for maximum comfort and readability.

Built-in 17" TFT LCD screen, 32 million colors, with a

resolution of 1920 horizontal x 1200 vertical pixels WUXGA.

Legal Footnote (LCD)*6

For more information regarding the LCD, please refer to the Legal

Footnotes section in Chapter 11 or click the *6 above.

Graphics controller Graphics controller maximizes display

performance. Refer to Display Controller and

Video modes section in Appendix B for more

information.

User’s Manual 1-7

Page 28

Qosmio G40

Legal Footnote (Graphics Processor Unit (“GPU”))*7

For more information regarding the Graphics Processor Unit (“GPU”), please refer to the Legal Footnotes section in Chapter 11 or click the *7 above.

Keyboard

Built-in The internal keyboard provides the embedded

numeric overlay keys, dedicated cursor control overlay keys, and Keys. The keyboard is compatible with the IBM Refer to Chapter 5, The Keyboard, for details.

enhanced keyboard.

Pointing Device

Built-in Touch Pad The integra ted Touch Pad and control buttons in

Qosmio AV Controller

the palm rest allow control of the on-screen pointer and support functions such as the scrolling of windows.

This button allows you to operate the Media Center.

Ports

External monitor The analog VGA port provides support for VESA

DDC2B compatible functions.

Universal Serial Bus (USB 2.0)

i.LINK™ (IEEE1394) This port allows high-speed data transfer to take

The computer supports multiple Universal Serial Bus ports that comply with the USB 2.0 standard.

place between the computer and external devices such as digital video cameras.

Slots

PC Card The internal PC Card slot accommodates a

ExpressCard The internal ExpressCard slot is a Universal slot.

Bridge media This slot lets you insert SD/SDHC memory card,

single Type II (5mm) card.

This slot supports ExpressCard/54 and ExpressCard/34 modules.

miniSD/microSD Card, Memory Stick (PRO/PRO Duo), xD picture card and MultiM ediaCard. Refer to Chapter 9, Optional Devices.

1-8 User’s Manual

Page 29

Multimedia

Qosmio G40

Sound system The integrated sound system provides support

for the computer’s internal speakers and microphone, as allowing an external microphone and headphones to be connected via the appropriate jacks.

Web Camera Web Camera is a device that allows you to

record video or take photographs with your computer. You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. Camera Assistant Software will help you to add various video effects to your video or photograph.

Please refer to the Web Camera section in Chapter 4, Operating Basics.

TV antenna port Connect the antenna cable to this port to watch

TV programs on your computer or record them. The dimensions and shape of the TV antenna

port vary for different regions.

S-Video-in Port A camcorder or other recording device can be

connected to this port via the S-Video-in cable (optional) for importing video data. Refer to the

S-Video-in section in Chapter 9, Optional Devices.

S-Video out port This S-Video out port lets you transfer NTSC or

PAL data to external devices. Refer to the TV section in Chapter 9, Optional Devices.

VIDEO-IN port With the bundled VIDEO-IN cable, the CATV or

satellite set top boxes can be connected to the computer to view the channels.

Please refer to Chapter 8, Connecting the

VIDEO-IN port for details on how to connect the

computer with the VIDEO-IN cable.

HDMI out port HDMI out port can connect with Type A

connector HDMI cable. One HDMI cable can send and receive video,

audio and control signals.

Headphone (S/PDIF) jack

This jack lets you connect digital speakers or a stereo headphone (16 ohm minimum). When you connect a digital speaker or headphones, the internal speaker is automatically disabled. This jack can be used also as S/PDIF jack and enables connection of optical digital correspondence apparatus.

User’s Manual 1-9

Page 30

Qosmio G40

Headphone jack A 3.5mm mini headphone jack enables

connection of stereo headphones or powered speakers.

Microphone jack A 3.5mm mini microphone jack enables

connection of a three-conductor microphone for monaural input.

Line-in jack A standard 3.5 mm mini line-in jack enables

connection of a stereo device for audio input.

Built-in TV Tuner Built-in TV Tuner enables watching and

recording TV programs. Some models are capable of simultaneously recording 2 different television programs.

Infrared receiver window

This is a sensor window that receives signals from the Remote Controller which is provided with your computer.

Infrared transmitter cable port

Connect the Infrared transmitter cable to this port.

Connecting the set top box or other external device to the computer using the infrared transmitter cable allows the external device to be operated using the computer and specialized remote control.

Remote Controller Use this device to navigate when watching TV or

playing CDs/DVDs/HD DVDs.

Communications

Modem An internal modem provides capability for data

LAN The computer has built-in support for Ethernet

Bluetooth Some computers in this series offer Bluetooth

and fax communication. It supports V.90 or V.92 depending on the region. The speed of data transfer and fax depends on analog telephone line conditions. It has a modem jack for connecting to a telephone line.

LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) and Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T).

wireless communication functionality which eliminates the need for cables between electronic devices such as computers and printers. When implemented, Bluetooth provides a fast, reliable and secure means to achieve wireless communication in a small space.

1-10 User’s Manual

Page 31

Qosmio G40

Wireless LAN Some computers in this series are equipped with

a Wireless LAN card that is compatible with other LAN systems based on Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing radio technology that complies with the IEEE 802.1 1 Standard (Revision A, B, G or N Draft Ver. 1.0).

■ The transmission speed over the wireless LAN and the distance over

which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations. The Transmit Rate (at X Mbit/s) is the theoretical maximum speed under the IEEE802.11 (a/b/g) st andard. The actual transmission speed will be lower than the theoretical maximum speed.

■ The Wake-up on Wireless LAN function is effective only when it is

connected with an Access Point. This function becomes invalid when the connection is broken.

Legal Footnote (Wireless LAN)*8

For more information regarding Wireless LAN, please refer to the Legal

Footnotes section in Chapter 11 or click the *8 above.

Wireless communication switch

This switch turns the Wireless LAN and Bluetooth functions on and off. Please note that all models are provided with a Wireless communication switch and some models are equipped with both Wireless LAN and Bluetooth functionality.

Security

Security lock slot Connects a security lock to anchor the computer

to a desk or other large object.

User’s Manual 1-11

Page 32

Qosmio G40

Special features

The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use.

Access each function using the following procedures. *1 To access the Power Options, click Start -> Control Panel -> System

and Maintenance -> Power Options. Hot keys Hot keys are specific key combinations that let

you quickly change the system configuration directly from the keyboard without running a system program.

Display automatic power off

This feature automatically cuts off power to the computer’s display panel when there is no keyboard input for a specified time, with power being restored the next time a key is pressed. This can be specified in the Power Opti ons.

HDD automatic power off

This feature automatically cuts off power to the hard disk drive when it is not accessed for a specified time, with power being restored when the hard disk drive is next accessed. This can be specified in the Power Options.

System automatic Sleep/Hibernation

Mode

This feature automatically shuts down the system into either Sleep Mode or Hibernation Mode when there is no input or hardware access for a specified time. This can be specified in the Power Options.

Keypad overlay A ten-key numeric keypad is integrated into the

keyboard. Please refer to the Keypad overlay section in Chapter 5, The Keyboard, for information on using this feature.

Power on password Two levels of password security, supervisor and

user, are available to prevent unauthorized access to your computer.

Instant security A specific hot key function automatically locks the

system providing data security.

Intelligent power supply

A microprocessor in the computer’s intelligent power supply detects the battery’s charge, automatically calculates the remaining battery capacity and protects electronic components from abnormal conditions such as a voltage overload from the AC adaptor. This can be specified in the Power Options.

1-12 User’s Manual

Page 33

Battery save mode

Panel power on/off

Low battery automatic Hibernation Mode

Heat dispersal

This feature lets you configure the computer in order to save battery power. This can be specified in the Power Options.

This feature automatically turns power to the computer off when the display panel is closed, and turns it back on when the display panel is opened. This can be specified in the Power Options.

When battery power is exhausted to the point that computer operation cannot be continued, the

system automatically enters Hibernation Mode and shuts itself down. This can be specified in the Power Options.

T o protect against overheating, the processor has an internal temperature sensor so that, if the computer’s internal temperature rises to a certain level, the cooling fan is turned on or the processing speed is lowered. This can be specified in the Power Options.

Qosmio G40

Hibernation Mode This feature lets you turn of f the power to the

computer without exiting from your software. The contents of main memory are automatically saved to the hard disk drive so that when you next turn the power on again, you can continue working right where you left off. Refer to the

Turning off the power section in Chapter 3, Getting Started, for more details.

Sleep Mode If you have to interrupt your work, you can use

this feature to allow you to turn off power to the computer without exiting from your software. Data is maintained in the computer’s main memory so that when you next turn on the power, you can continue working right where you left off.

User’s Manual 1-13

Page 34

Qosmio G40

TOSHIBA Value Added Package

This section describes the TOSHIBA Component features pre-installed on the computer.

TOSHIBA Power Saver

TOSHIBA Button Support

TOSHIBA Zooming Utility

TOSHIBA PC Diagnostic Tool

TOSHIBA Password Utility

TOSHIBA Flash Cards

TOSHIBA Power Saver provides you with the features of more various power supply managements.

This utility controls the following computer panel functions.

The applications associated with each of the following panels can be assigned by the user.

■ Panels: Assign applications to the REC,

Brightness, Illumination On/Off, DOLBY, TV-out panels.

This utility allows you to enlarge or reduce the icon size on the Windows Desktop, or the zoom factor associated with specific supported applications.

The TOSHIBA PC Diagnostic Tool will display basic system configuration information and allow the functionality of some of the computer’s built-in hardware devices to be tested.

The TOSHIBA Password utility allows you to set a password in order to restrict access to the computer.

The TOSHIBA Flash Cards provide a quick way to modify selected system functions and to launch applications.

■ Hot key function

■ TOSHIBA utility launcher function

HW Setup This utility allows you to customize your

TOSHIBA Accessibility

1-14 User’s Manual

hardware settings according to the way you work with the computer and the peripherals you use.

The TOSHIBA Accessibility utility provides support to movement impaired users when they need to use the TOSHIBA Hot-key function s. In use, the utility allows you to make the FN key “sticky”, that is you can press it once, release it, and they press one of the “F” keys in order to access its specific function. When set, the FN key will remain active until another key is pressed.

Page 35

Utilities and Applications

This section describes the pre-installed utilities that come with the computer and details how to start them. For further information on their operation, please refer to each utility’s online manual, help files or README.TXT file.

Fingerprint Utility This product has a fingerprint utility installed for

Bluetooth Stack for Windows by Toshiba

Qosmio G40

the purpose of enrolling and recognizing fingerprints which can then be linked to a username and password in order to remove the need to input these details from the keyboard. Just by swiping an enrolled finger against the fingerprint sensor, the following functions will be enabled:

■ Logon to Windows and access a security

enabled homepage through Internet Explorer.

■ Files and folders can be encrypted/decrypted

and third party access to them is prevented.

■ Disable the password-protected screen-saver

when returning from a power-saving mode such as Sleep Mode.

■ Authentication of the User Password (and,

if applicable, the HDD(Hard Disk Drive) Password) when booting up the computer (Power-on Security).

■ Single Sign-on feature

This software enables communication between the computer and external Bluetooth devices such as printers and mobile phones.

Bluetooth functions cannot be used in models that do not have a Bluetooth module installed.

TOSHIBA Assist TOSHIBA Assist is a graphical user interface that

provides access to specific tools, utilities and applications that make the use and configuration of the computer easier.

TOSHIBA ConfigFree TOSHIBA ConfigFree is a suite of utilities that

User’s Manual 1-15

improve the ease and control of communication devices and network connections, help in the identification of communication problems and allow the creation of profiles if you need to switch between different locations and communication networks. To access this utility, click Start ->

All Programs -> TOSHIBA -> Networking -> ConfigFree.

Page 36

Qosmio G40

TOSHIBA Disc Creator

TOSHIBA DVD-RAM Utility

Ulead DVD MovieFactory for TOSHIBA

TOSHIBA SD Memory Card Format

Windows Mobility Center

TOSHIBA HD DVD PLAYER

You can create CD’s and DVD’s in a number of formats including audio CD’s that can be played on a standard CD player, and data CD’s/DVD’s which can store copies of the files and folders on your computer’s hard disk drive. This software can be used on models with either a HD DVD-ROM drive or a HD DVD-R drive.

To access this utility, click Start -> All Programs

-> TOSHIBA -> CD&DVD Applications -> Disc Creator.

TOSHIBA DVD-RAM Utility has the function of Physical Format and Write-Protect to DVD-RAM. This utility is contained the setup module of TOSHIBA Disc Creator. To access this utility, click Start -> All Programs -> TOSHIBA -> CD&DVD Applications -> DVD-RAM Utility.

Ulead DVD MovieFactory for TOSHIBA allows users to instantly create DVD video or slideshow discs via a user-friendly wizard interface with specific task oriented features.

This utility allows you to format an SD memory card by the SD standard format.

This section describes the Windows Mobility Center. Mobility Center is a utility for accessing several mobile PC settings quickly in one window. A default maximum of eight tiles are provided by the operating system, and the additional two tiles are added to your Mobility Center.

■ Lock Computer:

This can be used to lock your computer without turning it off. This has the same function as the Lock button at the bottom of the right pane in the start menu.

■ TOSHIBA Assist:

This can be used to open TOSHIBA Assist if it is already installed in your computer.

This software is provided for playback of HD DVD Video.

Please refer to the included Qosmio HD DVD Guide for more information on using the TOSHIBA HD DVD PLAYER.

1-16 User’s Manual

Page 37

Qosmio G40

Options

CD/DVD Drive Acoustic Silencer

You are able to add a number of options and accessories in order to make your computer even more powerful and convenient to use. For reference, the following list details some of the items that are available from your reseller or TOSHIBA dealer:

Memory expansion A 512MB, 1,024MB or 2,048MB memory module

Battery Pack An additional battery pack can be purchased for

Universal AC Adaptor

USB FDD kit The USB floppy disk drive accommodates either

The CD/DVD Drive Acoustic Silencer utility allows you to configure the read speed at which the optical disc drive will operate. In use you can select either Normal Mode, which will operate the drive at its maximum speed for quick data access, or Quiet Mode, which operates the drive at single speed for audio CD playback and which can lessen the operational noise. This utility does not have any function when using DVD’s.

(DDR2-667) can easily be installed in the computer.

use as either a spare or replacement. Please refer to Chapter 6, Power for futher information.

If you frequently use your computer at more than one site, it may be convenient to purchase an additional AC adaptor to be kept at each site in order to remove the need to always carry the adaptor with you.

a 1.44MB or 720KB floppy disk through connection to one of the computer’s USB ports. In use, please be aware that, while you cannot format 720KB floppy disks under Windows Vista™, you are able to read and write to disks that have already been formatted.

Battery Charger The optional battery charger allows you to

Bluetooth USB Adaptor

User’s Manual 1-17

charge extra battery packs outside of having to use the computer.

A Bluetooth adaptor that has a USB connector. Wireless communications can be carried out with Bluetooth-compatible equipment by connecting to the USB port of the computer. You can buy the module from a TOSHIBA dealer.

Page 38

Qosmio G40

Bluetooth Wireless Mouse

Bluetooth Wireless Stereo

The Bluetooth Wireless Mouse is a wireless optical mouse compatible with Bluetooth. You can buy the Bluetooth Wireless Mouse from a TOSHIBA dealer.

The Bluetooth Wireless Stereo is a wireless stereo headphone set compatible with Bluetooth. You can buy the Bluetooth Wireless Stereo from a TOSHIBA dealer.

1-18 User’s Manual

Page 39

The Grand Tour

This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer.

Legal Footnote (Non-applicable Icons)*9

For more information regarding Non-applicable Icons, please refer to the

Legal Footnotes section in Chapter 11 or click the *9 above.

Front with the display closed

The following figures show the computer’s front with its display panel in the closed position.

System indicators

Qosmio G40

Chapter 2

Display latch

HD DVD-ROM drive or HD DVD-R drive

Front of the computer with display closed

HD DVD-ROM or HD DVD-R drive

System indicators These LED indicators allow you to monitor the

Display latch This latch secures the display panel in its closed

Infrared receiver window

User’s Manual 2-1

The computer is configured with a HD DVD-ROM or HD DVD-R drive.

status of various computer functions and are described in more detail within the System

indicators section.

position - push the latch in order to open the display for use.

This is a sensor window that receives signals from the remote control which is provided with your computer.

Infrared receiver window

Page 40

Qosmio G40

Left side

The following figure shows the computer’s left side.

Security lock slot

Universal Serial Bus (USB 2.0) port

Bridge media slot

Wireless communication switch

i.LINK (IEEE1394) port

ExpressCard slot

PC Card slot

PC Card eject button

The left side of the computer

ExpressCard eject button

Universal Serial Bus (USB 2.0) port

Security lock slot A security cable can be attached to this slot and

then connected to a desk or other large object in order to deter theft of the computer.

ExpressCard slot This slot allows you to install a single

ExpressCard device.

ExpressCard eject button

This button is used in order to remove an ExpressCard from within the computer.

PC Card slot This slot can accommodate a single Type II,

16-bit or 32-bit (CardBus) PC Card device.

PC Card eject button This button is used in order to remove a PC Card

from within the computer.

Keep foreign metal objects, such as screws, staples and paper clips, out of the ExpressCard slot and PC Card slot. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury.

Universal Serial Bus (USB 2.0) ports

Two Universal Serial Bus ports, which comply with the USB 2.0 standard, are provided on the left hand side of the computer. The ports with the icon ( ) has USB Sleep and Charge function.

Keep foreign metal objects, such as screws, staples and paper clips, out of the USB connectors. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury.

2-2 User’s Manual

Page 41

Qosmio G40

Please note that it is not possible to confirm the operation of all functions of all USB devices that are available. In view of this it may be noted that some functions associated with a specific device might not operate properly.

Bridge media slot This slot lets you insert an SD/SDHC memory

card, miniSD/microSD Card, Memory Stick (PRO/PRO Duo), xD picture card and MultiMediaCard. Refer to Chapter 9, Optional

Devices.

Keep foreign metal objects, such as screws, staples and paper clips, out of the Bridge media slot. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury.

Wireless communication switch

Slide this switch to the right to turn off Wireless LAN and Bluetooth functions. Slide it to the left to turn on the functions.

All models are provided with a Wireless communication switch although only some models are equipped with both Wireless LAN and Bluetooth functions.

■ Turn Wi-Fi® and Bluetooth functionalities off when near a person who

may have a cardiac pacemaker implant or other medical electric device. Radio waves may affect pacemaker or medical device operation, possibly resulting in serious injury. Follow the instruction of your medical device when using any Wi-Fi or Bluetooth functionality.

■ Always turn off Wi-Fi or Bluetooth functionality if the computer is near

automatic control equipment or appliances such as automatic doors or fire detectors. Radio waves can cause malfunction of such equipment, possibly resulting in serious injury.

■ Do not use the Wi-Fi or Bluetooth functionalities near a microwave

oven or in areas subject to radio interference or magnetic fields. Interference from a microwave oven or other source can disrupt Wi-Fi or Bluetooth operation.

i.LINK (IEEE1394) port

This port allows you to connect an external device, such as a digital video camera, to the computer for high-speed data transfer.

User’s Manual 2-3

Page 42

Qosmio G40

Right side

The following figure shows the computer’s right side.

Headphone (S/PDIF) jack

Line-in jack

Universal Serial Bus (USB 2.0) port

VIDEO-IN port

S-Video-in port

Headphone jack

The right side of the computer

Modem jack

Microphone jack

Headphone jack A 3.5 mm mini headphone jack enables

connection of stereo headphones.

Headphone (S/PDIF) jack

This jack lets you connect digital speakers or a stereo headphone (16 ohm minimum). When you connect a digital speaker or headphones, the internal speaker is automatically disabled.

This jack can be used also as S/PDIF jack and enables connection of optical digital correspondence apparatus.

Microphone jack A 3.5 mm mini microphone jack enables

connection of a three-conductor mini jack for monaural microphone input.

Line-in jack A standard 3.5 mm mini line-in jack enables

connection of a stereo device for audio input.

Universal Serial Bus (USB 2.0) port

The Universal Serial Bus port, which complies with the USB 2.0 standard, is provided on the right side of the computer.

Modem jack The modem jack allows you use to attach a

modular cable in order to connect the internal modem directly to a telephone line.

2-4 User’s Manual

Page 43

Qosmio G40

■ Connection to any communication line other than an analog phone line

could cause a computer system failure.

■ Connect the built-in modem only to ordinary analog phone lines.

■ Never connect the built-in modem to a digital line (ISDN).

■ Never connect the built-in modem to the digital connector on a

public telephone or to a digital private branch exchange (PBX).

■ Never connect the built-in modem to a key telephone system for

residences or offices.

■ Never operate your computer on AC power during a thunderstorm. If

you see lightning or hear thunder, immediately turn off the computer. An electric surge caused by the storm, may result in a system failure, loss of data or hardware damage.

VIDEO-IN port With the bundled VIDEO-IN cable, the CATV or

satellite set top boxes can be connected to the computer to view the channels.

Please refer to Chapter 8, AV functions for details on how to connect the computer with the VIDEO-IN cable.

S-Video-in port A camcorder or other recording device can be

connected to your computer via the S-Video-in cable for importing video data. Connect the cable to this port for this operation. Refer to the S-

Video-in section in Chapter 9, Optional Devices.

User’s Manual 2-5

Page 44

Qosmio G40

Back

The following figure shows the computer’s back.

Infrared transmitter cable

TV antenna port

ports

S-Video out port

Universal Serial Bus (USB 2.0) ports

External monitor port

LAN active indicator (orange)

Link indicator (green)

DC IN 15V jack

Cooling vents

The back of the computer

HDMI out port

LAN jack

TV antenna port Connect the antenna cable to this port to watch

TV programs on your computer or record them. The dimensions and shape of the TV antenna

port vary for different regions.

DC IN 15V jack The AC adaptor connects to this jack in order to

power the computer and charge its internal batteries. Please note that you should only use the model of adaptor supplied with the computer at the time of purchase - using the wrong adaptor can cause damage to the computer.

Cooling vents The computer’s cooling vents help keep the

processor from overheating.

Do not block the cooling vents. Keep foreign metal objects, such as screws, staples and paper clips, out of the cooling vents. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury.

Infrared transmitter cable ports

Connect the infrared transmitter cable to the infrared transmitter cable port on the computer and to the set-top box.

S-Video out port The S-Video out port supports the connection of

an optional S-Video cable to attach the computer to a television or similar device.

Universal Serial Bus (USB 2.0) ports

Two Universal Serial Bus ports, which comply with the USB 2.0 standard, are provided on the back of the computer.

2-6 User’s Manual

Page 45

Qosmio G40

External monitor port

This port allows you to connect an external video display to the computer.

HDMI out port HDMI out port can connect with Type A

connector HDMI cable. One HDMI cable can send and receive video,

audio and control signals.

LAN jack This jack lets you connect to a LAN. The adaptor

has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) and Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T). The LAN has two indicators. Refer to Chapter 4,

Operating Basics, for details.

■ Do not connect any cable other than a LAN cable to the LAN jack.

It could cause damage or malfunction.

■ Do not connect the LAN cable to a power supply. It could cause

damage or malfunction.

Link indicator (green)

LAN active indicator (orange)

This indicator glows green when the computer is connected to a LAN and the LAN is functioning properly.

This indicator glows orange when data is being exchanged between the computer and the LAN.

User’s Manual 2-7

Page 46

Qosmio G40

Underside

The following figure shows the underside of the computer. You should ensure that the display is closed before the computer is turned over to avoid causing any damage.

Memory module slots

Speaker (subwoofer)

Battery pack

Battery release latch

The underside of the computer

Battery safety lock

Memory module slots

The memory module slots are located here. The memory module slots allow for the installation, replacement and removal of additional memory modules. Please refer to the Memory expansion section in Chapter 9, Optional Devices for more information.

Battery safety lock Slide this latch into its “Unlock” position in order

to release the battery pack ready for removal.

Battery release latch Slide and hold this latch into its “Unlock” position

in order to release the battery pack ready for removal.

For more detailed information on removing the battery pack please refer to Chapter 6, Power.

2-8 User’s Manual

Page 47

Battery pack The battery pack provides power to the computer

Speaker (subwoofer) The subwoofer will reproduce of the low

Front with the display open

This section shows the computer with the display panel open. In order to open the display, simply push the display latch on the front of the computer , lift the display panel up and position it at a comfortable viewing angle for you.

Web Camera LED

Microphone

Display screen

Qosmio G40

when the AC adaptor is not connected. For more detailed information on the use and operation of the battery pack please refer to Chapter 6,

Power.

frequency sounds generated. Some models are equipped with a subwoofer.

Web Camera

Stereo speaker (tweeter right)

Stereo

speaker

(tweeter left)

Display hinge

Stereo speaker

LCD Sensor switch

(Left)

(Not shown)

Power button

Volume control dial

Front operation panel (eleven panels)

Touch Pad

Display hinge

Stereo speaker (Right)

Qosmio AV Controller

Fingerprint Sensor

Touch Pad control buttons

The front of the Touch Pad model with the display open

Display hinge The display hinges allow the display panel to be

position at a variety of easy-to-view angles.

User’s Manual 2-9

Page 48

Qosmio G40

Stereo speakers The speakers will reproduce all of the sounds

generated through the installed software, together with any alarms, such as that accompanying a low battery condition, that are generated by the system.

Keep foreign objects out of the speakers. Never allow metal objects, such as screws, staples and paper clips, to enter the computer or keyboard. Foreign metal objects can create a short circuit, which can cause computer damage and fire, possibly resulting in serious injury.

Speakers (tweeter) The tweeter will reproduce of the high-frequency

sounds generated.

Display screen The internal screen displays high-contrast text

and graphics images up to the maximum resolution supported by the model in question. For example, an WUXGA compatible model will support resolutions between 800x600 and 1920x1200 pixels. Please be aware that, when the computer is operating on the AC adaptor, the image displayed on the internal screen will be somewhat brighter than when it operates on battery power. This difference in brightness levels is intended to save power when operating on batteries. For more information on the computer’s display, please refer to the Display

Controller and Video modes section in

Appendix B.

Front operation panel (eleven panels)

Eleven panels are available for use: TV, CD/DVD, Play/Pause, Stop, Previous, Next,

Record, Brightness, Illumination On/Off, DOLBY, TV-out.

These panels allow you to manage Audio/Video, run applications and access utilities.

Refer to Chapter 8, AV functions for details.

Power button Press this button to turn the computer’s power on

and off. The Power button will glow blue when the computer’s power is on.

Touch Pad The Touch Pad mouse control device located in

the center of the palm rest is used to control the movement of the on-screen pointer. For more information, please refer to the Using the Touch

Pad section in Chapter 4, Operating Basics.

2-10 User’s Manual

Page 49

Qosmio G40

To uc h Pa d co ntrol buttons

The control buttons located below the T ouch Pad allow you to select menu items or manipulate text and graphics as designated by the on-screen pointer.

Fingerprint Sensor

Just by swiping a valid and enrolled finger against the fingerprint sensor, the following functions will be enabled:

■ Logon to Windows and access a security

enabled homepage through Internet Explorer.

■ Files and folders can be encrypted/decrypted

and third party access to them prevented.

■ Disable the password-protected screen-saver

when returning from a power-saving mode such as Sleep Mode.

■ Power-on security and single sign-on

facilities.

Web Camera Web Camera is a device that allows you to

Enables the transmission of video and use of video chat via the internet using specialized applications.

The effective pixel count for this web camera is

1.92 million. Please refer to the Web Camera section in

Chapter 4, Operating Basics.

Web Camera LED

The Web Camera LED lights up when the Web Camera is operating.

Qosmio AV Controller

This button allows you to operate the Media Center.

Please refer to the Qosmio AV Controller section in Chapter 8, AV functions for more information.

User’s Manual 2-11

Page 50

Qosmio G40

LCD Sensor switch This switch senses when the display panel is

either closed or opened and activates the Panel Power Off/On feature as appr o p r ia te . For example, when you close the display panel the computer enters Hibernation Mode and shuts itself down and then, when you next open the display, the computer will automatically start up and return you to the application you were previously working on.

You can specify within the Power Options. To access it, click Start -> Control Panel -> System and Maintenance -> Power Options.

Do not put any magnetic objects close to this switch as they may cause the computer to automatically enter Hibernation Mode and shut down even if the Panel Power Off feature is disabled.

Volume control dial Use this dial to adjust the volume of the internal

stereo speakers and optional external stereo headphones (if connected).

Turn the dial clockwise to increase the volume and turn it counter-clockwise to decrease the volume.

Microphone A built-in microphone allows you to import and

record sounds for your applications - please refer to the Sound system section in Chapter 4,

Operating Basics for more information.

System indicators

The LED system indicators for specific computer operations glow when those operations are in progress.

System indicators

DC IN The DC IN indicator normally glows blue when

2-12 User’s Manual

power is being correctly supplied from the AC power adaptor. However, If the output voltage from the adaptor is abnormal, or if the computer’s power supply malfunctions, this indicator will flash orange.

Page 51

Qosmio G40

Power The Power indicator normally glows blue when

the computer is turned on. However, if you turn the computer off into Sleep Mode, this indicator will flash orange - approximately one second on, two seconds off - both while the system is shutting down and while it remains turned off.

Battery The Battery indicator shows the condition of the

battery’s charge - blue indicates the battery is fully charged, orange indicates the battery is charging, and flashing orange indicates a low battery condition. Please refer to Chapter 6,

Power for more information on this feature.

Hard Disk Drive The Hard Disk Drive indicator glows blue

whenever the computer is accessing the built-in hard disk drive.

Optical Disc Drive The Optical Disc Drive indicator glows blue

when the computer is accessing a disc in the optical disc drive.

Bridge media slot The Bridge media slot indicator glows blue

when the computer is accessing the Bridge media slot.

Wireless communication

The Wireless communication indicator glows orange when the Bluetooth and wireless LAN functions are turned on.

All models are provided with a Wireless Communication switch although only some models are equipped with both Wireless LAN and Bluetooth functions.

User’s Manual 2-13

Page 52

Qosmio G40

Keyboard indicators

The following figures show the positions of the CAPS LOCK indicator and the keypad overlay indicators which show the following conditions:

■ When the CAPS LOCK indicator glows, the keyboard will produce

■ When the Arrow Mode indicator glows, the keypad overlay allows you to

■ When the Numeric Mode indicator glows, the keypad overlay allows

CAPS LOCK indicator

capitals when any letter is typed.

use cursor functions.

you to enter numbers.

Arrow Mode indicator

Numeric Mode indicator

Keypad indicators

CAPS LOCK This indicator glows green when letter keys are

locked into their uppercase format.

Arrow Mode When the Arrow Mode indicator lights green,

you can use the gray labeled keys on the keypad overlay as cursor keys. Please refer to the

Keypad overlay section in Chapter 5, The Keyboard for more information.

Numeric Mode When the Numeric Mode indicator lights green,

you can use the gray labeled keys on the keypad overlay for number entry. Please refer to the

Keypad overlay section in Chapter 5, The Keyboard for more information.

2-14 User’s Manual

Page 53

Optical disc drives

One of the following optical disc drives is provided in the computer: HD DVD-ROM and HD DVD-R drives. This optical drive uses an ATAPI interface controller for CD and DVD operation and has an indicator at its front which will glows to indicate that it is in use.

For further information on loading and unloading discs, please refer to the

Using HD DVD-ROM drive an d HD D V D-R drives section in Chapter 4, Operating Basics.

Region codes for DVD drives and media

HD DVD-ROM drive, HD DVD-R drives and their associated media are manufactured according to the specifications of six marketing regions. When you purchase DVD Video media you should ensure that it matches the specification of your drive, otherwise it will not play properly.

Code Region

1 Canada, United States 2 Japan, Europe, South Africa, Middle East 3 South East Asia, East Asia

Qosmio G40

4 Australia, New Zealand, Pacific Islands, Central America,

5 Russia, Indian Subcontinent, Africa, North Korea, Mongolia 6 China

South America, Caribbean

Writab le discs

This section describes the types of writable CD, DVD and HD DVD media available, and should be used in conjunction with the specification of your computer/optical drive in order to understand the type of discs that can be written. Please refer to Chapter 4, Operating Basics for further information.

CDs

■ CD-R media can only be written to once - the recorded data cannot

subsequently be erased or changed.

■ CD-RW media, including multi-speed CD-RW discs, high-speed

CD-RW discs and ultra-speed CD-RW discs, can be recorded to more than once.

User’s Manual 2-15

Page 54

Qosmio G40

DVDs

HD DVDs

Formats

■ DVD-R, DVD+R, DVD-R (Dual Layer) and DVD+R (Double Layer)

media discs can only be written to once - the recorded data cannot subsequently be erased or changed.

■ DVD-RW, DVD+RW and DVD-RAM media can be recorded to more

than once.

■ HD DVD-R and HD DVD-R (Dual Layer) media discs can only be

written to once - the recorded data cannot subsequently be erased or changed.

The drives support the following formats:

■ CD-ROM

■ DVD-ROM

■ DVD-R

(Dual Layer)

■ DVD-RW

■ DVD+R

(Double Layer)

■ DVD+RW

■ DVD-RAM

■ DVD-Video

■ CD-R

■ CD-RW

■ CD-DA

■ CD-Text

■ CD-ROM XA Mode 2

(Form1, Form2)

■ CD-ROM Mode 1,

Mode 2

■ Photo CD™

(single/multi-session)

■ Enhanced CD

(CD-EXTRA)

■ Addressing Method 2

■ HD DVD-ROM

(Single-sided Single-Layer)

■ HD DVD-ROM

(Single-sided Dual-Layer)

■ HD DVD

(Twin format disc)

■ HD DVD-Video

Some types and formats of DVD-R (Dual Layer) and DVD+R (Double Layer) discs may be unreadable.

2-16 User’s Manual

Page 55

HD DVD-ROM drive

The full-size HD DVD-ROM module allows you to record data to recordable CD’s and DVD’s as well as run either 12cm (4.72") CD’s, DVD’s and HD DVD’s, and 8cm (3.15") CD’s and DVD’s without using an adaptor.

The speed is slower at the center of a disc and faster at the outer edge.

HD DVD read 1 speed (maximum) DVD read 8 speed (maximum) DVD-R write 4 speed (maximum) DVD-R (Dual Layer) write 2 speed (maximum) DVD-RW write 4 speed (maximum) DVD+R write 4 speed (maximum) DVD+R (Double Layer) write 2.4 speed (maximum) DVD+RW write 4 speed (maximum) DVD-RAM write 3 speed (maximum) CD read 24 speed (maximum) CD-R write 16 spe ed (maximum) CD-RW write 10 speed (maximum,

Ultra-speed media)

HD DVD-R drive

Qosmio G40

The full-size HD DVD-R module allows you to record data to recordable CD’s and DVD’s as well as run either 12cm (4.72") CD’s, DVD’s and HD DVD’s, and 8cm (3.15") CD’s and DVD’s without using an adaptor.

The speed is slower at the center of a disc and faster at the outer edge.

HD DVD read 1 speed (maximum) HD DVD-R write 1 speed (maximum) HD DVD-R (Dual Layer) write 1 speed (maximum) DVD read 8 speed (maximum) DVD-R write 4 speed (maximum) DVD-R (Dual Layer) write 2 speed (maximum) DVD-RW write 4 speed (maximum) DVD+R write 4 speed (maximum) DVD+R (Dual Layer) write 2.4 speed (maximum) DVD+RW write 4 speed (maximum) DVD-RAM write 3 speed (maximum) CD read 24 speed (maximum) CD-R write 16 speed (maximum) CD-RW write 10 speed (maximum,

User’s Manual 2-17

Ultra-speed media)

Page 56

Qosmio G40

AC adaptor

The AC adaptor can automatically adjust to any voltage ranging from 100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to use this computer in almost any country/region. The adaptor converts AC power to DC power and reduces the voltage supplied to this computer.

To recharge the battery, simply connect the AC adaptor to a power source and to the computer. Please refer to Chapter 6, Power for further information.

The AC adaptor (2-pin plug)

The AC adaptor (3-pin plug)

■ Depending on the model in question, either a 2-pin or 3-pin

adaptor/power lead will be bundled with the computer.

■ Do not use a 3-pin to 2-pin conversion plug.

■ The supplied power cord conforms to safety rules and regulations in

the region the product is bought and should not be used outside of this region. In order to use the adaptor/computer in other regions, you should please buy a power cord that conforms to the safety rules and regulations in that particular region.

Always use the TOSHIBA AC adaptor that was provided with your computer and the TOSHIBA Battery Charger (that may have been provided with your computer), or use AC adaptors and battery chargers specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor or Battery Charger could cause fire or damage to the computer possibly resulting in serious injury.

2-18 User’s Manual

Page 57

Getting Started

This chapter provides basic information to start using your computer. It covers the following topics:

■ All users should be sure to read the section Starting up f or the first time.

■ Be sure to read the enclosed Instruction Manual for Safety and Comfort

for information on the safe and proper use of this computer. It is intended to help you be more comfortable and productive while using a notebook computer. By following the recommendations in it you may reduce your chance of developing a painful or disabling injury to your hand, arms, shoulders or neck.

■ Connecting the AC adaptor

■ Opening the display

■ Turning on the power

■ Starting up for the first time

■ Turning off the power

■ Restarting the computer

■ System Recovery Options

Qosmio G40

Chapter 3

■ Use a virus-check program and make sure it is updated regularly.

■ Never format storage media without checking its content. Formatting

destroys all stored data.

■ It is a good idea to periodically back up the internal hard disk drive or

other main storage device to external media. General storage media is not durable or stable over long periods of time and under certain conditions may result in data loss.

■ Before you install a device or application, save any data in memory to

the hard disk drive or other storage media. Failure to do so may result in the loss of data.

User’s Manual 3-1

Page 58

Qosmio G40

Connecting the AC adaptor

Attach the AC adaptor when you need to charge the battery or you want to operate from AC power. It is also the fastest way to get started, because the battery pack will need to be charged before you can operate from battery power.

The AC adaptor can be connected to any power source supplying from 100 to 240 volts and 50 or 60 hertz. For details on using the AC adaptor to charge the battery pack, refer to Chapter 6, Power.

■ Always use the TOSHIBA AC adaptor that was provided with your

computer and the TOSHIBA Battery Charger (that may have been provided with your computer), or use AC adaptors and battery chargers specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor or Battery Charger could cause fire or damage to the computer possibly resulting in serious injury. T O SHIBA assumes no liability for any damage caused by use of an incompatible adaptor or Battery Charger.

■ Never plug the AC adaptor or Battery Charger into a power source that

does not correspond to both the voltage and the frequency specified on the regulatory label of the unit. Failure to do so could result in a fire or electric shock, possibly resulting in serious injury.

■ Always use or purchase power cables that comply with the legal

voltage and frequency specifications and requirements in the country of use. Failure to do so could result in a fire or electric shock, possibly resulting in serious injury.

■ The supplied power cord conforms to safety rules and regulations in

the region the product is bought and should not be used outside this region. For use in other regions, please buy power cords that conform to safety rules and regulations in the particular region.

■ Do not use a 3-pin to 2-pin conversion plug.

■ When you connect the AC adaptor to the computer, always follow the

steps in the exact order as described in the User’s Manual. Connecting the power cable to a live electrical outlet should be the last step otherwise the adaptor DC output plug could hold an electrical charge and cause an electrical shock or minor bodily injury when touched. As a general safety precaution, avoid touching any metal parts.

■ Never place your computer or AC adaptor on a wooden surface,

furniture, or any other surface that could be marred by exposure to heat since the computer base and AC adaptor’s surface increase in temperature during normal use.

■ Always place your computer or AC adaptor on a flat and hard surface

that is resistant to heat damage.

Refer to the enclosed Instruction Manual for Safety and Comfort for detailed precautions and handling instructions.

3-2 User’s Manual

Page 59

Qosmio G40

1. Connect the power cord to the AC adaptor.

Connecting the power cord to the AC adaptor (2-pin plug)

Connecting the power cord to the AC adaptor (3-pin plug)

Either a 2-pin or 3-pin adaptor/cord will be included with the computer depending on the model.

2. Connect the AC adaptor’s DC output plug to the DC IN 15V jack on the back of the computer.

DC IN 15V jack

Connecting the adaptor to the computer

3. Plug the power cord into a live wall outlet - the Battery and DC IN indicators on the front of the computer should glow.

User’s Manual 3-3

Page 60

Qosmio G40

Opening the display

The computer’s display panel can be opened to a wide range of angles for optimal viewing.

1. Push the display latch on the front of the computer to unlatch the display panel.

2. While holding down the palm rest with one hand so that the main body of the computer is not raised, slowly lift the display panel - this will allow the angle of the display panel to be adjusted to provide optimum clarity.

Use reasonable care when opening and closing the display panel. Opening it vigorously or slamming it shut could damage the computer.

Display panel

Display latch

Opening the display

■ As the display panel cannot be opened until 180 degrees, please be

careful of the angle when flipping open the display panel.

■ Be careful not to open the display panel too far as this could put stress

on the display panel’s hinges and cause damage.

■ Do not press or push on the display panel.

■ Do not lift the computer by the display panel.

■ Do not close the display panel with pens or any other objects left in

between the display panel and the keyboard.

■ When opening or closing the display panel, place one hand on the

palm rest to hold the computer in place and use the other hand to slowly open or close the display panel (Do not use excessive force when opening or closing the display panel).

3-4 User’s Manual

Page 61

Turning on the power

This section describes how to turn on the power - the Power indicator will then indicate the status. Please refer to the Power indicators section in Chapter 6, Power for more information.

■ After you turn on the power for the first time, do not turn it off until you

have set up the operating system. Please refer to the section Starting

up for the first time for more information.

■ Volume cannot be adjusted during Windows Setup.

1. Open the computer’s display panel.

2. Press and hold the computer’s power button for two or three seconds.

Power button

Qosmio G40

Turning on the power

St arting up for the first time

The Microsoft Windows Vista™ Startup Screen will be the first screen displayed when you turn on the power. Follow the on-screen instructions on each screen in order to properly install the operating system.

When it is displayed, be sure to read the Software License Terms carefully.

User’s Manual 3-5

Page 62

Qosmio G40

Turning off the power

The power can be turned off in one of three modes, either Shut Down (Boot) Mode, Hibernation Mode or Sleep Mode.

Shut Down mode (Boot Mode)

When you turn off the power in Shut Down Mode no data will be saved and the computer will boot to the operating system’s main screen the next time it is turned on.

1. If you have entered data, either save it to the hard disk drive or to other storage media.

2. Make sure all disk/disc activity has stopped before removing the CD/DVD/HD DVD or floppy disk.

■ Make sure the Hard Disk Drive indicator is off. If you turn off the power

while a disk (disc) is being accessed, you may lose data or damage the disk.

■ Never turn off the power while an application is running. Doing so could

cause loss of data.

■ Never turn off the power, disconnect an external storage device or

remove storage media during data read/write. Doing so can cause data loss.

3. Click Start.

4. Click the arrow button ( ) located in the power management buttons ( ) and select Shut Down from the menu.

5. Turn off any peripheral devices connected to your computer.

Do not turn the computer or peripheral devices back on immediately - wait a short period to avoid any potential damage.

Sleep Mode

If you have to interrupt your work, you are able to turn off the power without exiting from your software by placing the computer into Sleep Mode. In this mode data is maintained in the computer’s main memory so that, when you turn on the power again, you can continue working right where you left off.

Turning Off Your Computer where Electronic Devices are Regulated or Controlled.

When you have to turn off your computer aboard an aircraft or in places where electronic devices are regulated or controlled, always shut down the computer completely or put the computer into Hibernation Mode. Instead of allowing it to go into Sleep Mode and turn off any wireless communication switches or devices. While in Sleep Mode the computer operating system may reactivate itself to run pre-programmed tasks or to preserve unsaved data, and might interfere with aviation or other systems, possibly causing serious injury.

3-6 User’s Manual

Page 63

Qosmio G40

■ Before entering Sleep Mode, be sure to save your data.

■ Do not install or remove a memory module while the computer is in

Sleep Mode. The computer or the memory module could be damaged.

■ Do not remove the battery pack while the computer is in Sleep Mode

(unless the computer is connected to an AC power source). Data in memory could be lost.

■ When the AC adaptor is connected, the computer will go into Sleep

Mode according to the settings in the Power Options (to access it, Start

-> Control Panel -> System and Maintenance -> Power Options).

■ To restore the operation of the computer from Sleep Mode, press and

hold the power button or any key on the keyboard for a short amount of time. Please note that keyboard keys can only be used if the Wake-up on Keyboard option is enabled within the HW Setup utility.

■ If the computer enters Sleep Mode while a network application is

active, the application might not be restored when the computer is next turned on and the system returns from Sleep Mode.

■ To prevent the computer from automatically entering Sleep Mode,

disable Sleep Mode within the Power Options (to access it, Start -> Control Panel -> System and Maintenance -> Power Options).

■ To use the Hybrid Sleep function, configure it in the Power Options.

Benefits of Sleep Mode

The Sleep Mode feature provides the following benefits:

■ Restores the previous working environment more rapidly than does the

Hibernation Mode feature.

■ Saves power by shutting down the system when the computer receives

no input or hardware access for the time period set by the System Sleep Mode feature.

■ Allows the use of the panel power off feature.

Executing Sleep Mode

You can also enable Sleep Mode by pressing FN + F3 - please refer to Chapter 5, The Keyboard, for further details.

You can enter Sleep Mode in one of four ways:

■ Click Start then click the power button ( ) located in the power

management buttons ( ). Please note that this feature must be enabled within the Power Options

(to access it, click Start -> Control Panel -> System and Maintenance

-> Power Options).

■ Click Start then click the arrow button ( ) and select Sleep from the

menu.

User’s Manual 3-7

Page 64

Qosmio G40

Hibernation Mode

■ Close the display panel. Please note that this feature must be enabled

within the Power Options (to access it, click Start -> Control Panel -> System and Maintenance -> Power Options).

■ Press the power button. Please note that this feature must be enabled

within the Power Options (to access it, click Start -> Control Panel -> System and Maintenance -> Power Options).

When you turn the power back on, you can continue where you left when you shut down the computer.

■ When the computer is in Sleep Mode, the Power indicator will blink

orange.

■ If you are operating the computer on battery power, you can lengthen

the overall operating time by turning it off into Hibernation Mode - Sleep Mode will consume more power while the computer is off.

Sleep Mode limitations

Sleep Mode will not function under the following conditions:

■ Power is turned back on immediately after shutting down.

■ Memory circuits are exposed to static electricity or electrical noise.

The Hibernation Mode feature saves the contents of memory to the hard disk drive when the computer is turned off so that, the next time it is turned on, the previous state is restored. Please note that the Hibernation Mode feature does not save the status of any peripheral devices connected to the computer.

■ Save your data. While entering Hibernation Mode, the computer saves

the contents of memory to the hard disk drive. However, for safety sake, it is best to save your data manually.

■ Data will be lost if you remove the battery or disconnect the AC adaptor

before the save is completed. Wait for the Hard Disk Drive indicator to go out.

■ Do not install or remove a memory module while the computer is in

Hibernation Mode. Data will be lost.

Benefits of Hibernation Mode

The Hibernation Mode feature provides the following benefits:

■ Saves data to the hard disk drive when the computer automatically

shuts down because of a low battery condition.

■ Y ou can return to your pre vious working environment imm ediately when

you turn on the computer.

■ Saves power by shutting down the system when the computer receives

no input or hardware access for the time period set by the System Hibernate feature.

■ Allows the use of the panel power off feature.

3-8 User’s Manual

Page 65

Qosmio G40

Starting Hibernation Mode

You can also enable Hibernation Mode by pressing FN + F4 - please refer to Chapter 5, The Keyboard, for further details.

To enter Hibernation Mode, follow the steps below.

1. Click St art.

2. Click the arrow button ( ) in the power management buttons

( ) and select Hibernate from the menu.

Automatic Hibernation Mode

The computer can be configured to enter Hibernation Mode automatically when you press the power button or close the lid. In order to define these settings, you can follow the steps as described below:

1. Click St art and click the Control Panel.

2. Click System and Maintenance and click Power Options.

3. Click Choose what the power button does or Choose what closing

the lid does.

4. Enable the desired Hibernation Mode settings for When I press the

power button and When I close the lid.

5. Click the Save changes button.

Data save in Hibernation Mode

When you turn off the power in Hibernation Mode, the computer will take a moment to save the current data in memory to the hard disk drive. During this time, the Hard Disk Drive indicator will glow.

After you turn off the computer , and the content of memory has been saved to the hard disk drive, turn off the power to any peripheral devices.

Do not turn the computer or devices back on immediately. Wait a moment to let all capacitors fully discharge.

Restarting the computer

Certain conditions require that you reset the computer, for example if:

■ You change certain computer settings.

■ An error occurs and the computer does not respond to your keyboard

commands.

User’s Manual 3-9

Page 66

Qosmio G40

If you need to restart the computer, there are three ways this can be achieved:

■ Click Start then click the arrow button ( ) in the power management

buttons ( ) and select Restart from the menu.

■ Press CTRL, ALT and DEL simultaneously (once) to display the menu

window, then select Restart from the Shut down options.

■ Press the power button and hold it down for five seconds. Once the

computer has turned itself off, wait between ten and fifteen seconds before turning the power on again by pressing the power button.

System Recovery Options

About 1.5 GB hidden partition is allocated on the hard disk drive for the System Recovery Options.

This partition stores files which can be used to repair the system in the event of a problem.

The System Recovery Options feature will be unusable if this partition is deleted.

System Recovery Options

The System Recovery Options feature is installed on the hard disk when shipped from the factory. The System Recovery Options menu includes tools to repair startup problems, run diagnostics or restore the system.

See the Windows Help and Support content for more information about Startup Repair.

The System Recovery Options can also be run manually to repair problems.

The procedure is as follows. Follow the instructions shown on the on-screen menu.

1. Turn off the computer.

2. While holding the F8 key, turn on the computer.

3. The Advanced Boot Options menu will be displayed. Use the arrow keys to select Repair Your Computer and press ENTER.

4. Follow the on-screen instructions.

The Windows Vista™ CompletePC Backup feature can be used on Windows Vista™ Business Edition and Ultimate Edition.

3-10 User’s Manual

Page 67

Operating Basics

This chapter describes the basic operations of your computer, highlights the precautions that should be taken when using it, and details the considerations that should be made when handling CD/DVD/HD DVD media.

Using the Touch Pad

To use the Touch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go.

Qosmio G40

Chapter 4

Touch Pad

Touch Pad control buttons

Touch Pad and Touch Pad control buttons

The two buttons below the Touch Pad are used like the buttons on a standard mouse - press the left button to select a menu item or to manipulate text or graphics designated by the pointer, and press the right button to display a menu or other function depending on the software you are using.

You can also tap the Touch Pad to perform functions similar to those of the left button on a standard mouse.

Click: Tap once Double-click: T ap twice Drag and drop: Tap to select the item(s) you want to move, leave your

finger on the T ouch Pad after the second tap and then move the item(s) to their new destination.

User’s Manual 4-1

Page 68

Qosmio G40

AV Controller

The following functions are available in this computer for operating the Media Center.

This section describes an overview of each function. Please refer to the

Qosmio AV Controller section in Chapter 8, AV functions for more

information.

■ Front operation panel

■ Qosmio AV Controller

■ Remote Controller

Front operation panel

The Front operation panel is located above the keyboard. AV related functions, such as TV, CD/DVD, Play/Pause, Stop , Previous,

Next, Record, Illumination On/Off and DOLBY are available.

Qosmio AV Controller

The Qosmio AV Controller is located at the right of the keyboard. Buttons in the inner circle of Qosmio AV Controller are the Arrow buttons

and OK button. Buttons in the outer circle are the More info button, Back button and Fast

move buttons.

■ The inner button group (Arrow buttons and OK button) and the outer

button group (More info button, Back button, Fast move buttons) cannot function at the same time. If both the inner and outer button groups are pressed simultaneously, the outer buttons will function.

■ If a function of either button group is operating, functions of the other

button group will not function.

4-2 User’s Manual

Page 69

Qosmio G40

Setting Qosmio AV Controller

The Qosmio AV Controller Manager is used to change the settings of the Qosmio AV Controller functions and the Front operation panel.

To access this utility, click Start -> All Programs -> TOSHIBA -> Utilities -> Qosmio AV Controller Manager.

■ ON/OFF setting of Qosmio AV Controller

Select the “Enable Qosmio AV Controller” check box to enable (ON) the functions of the Qosmio AV Controller and the Front operation panel. Deselect the check box to disable (OFF) the functions of the Qosmio AV Controller and the Front operation panel. The default is ON.

■ LED ON/OFF setting

Select the “Turn on LED” check box to always turn on (light up) LEDs. When buttons are pressed, the LEDs of these buttons will turn off. Deselect the check box to always turn off LEDs. When buttons are pressed, the LEDs of these buttons will light up. The default is ON.

■ Click volume setting

Use the slider to change the click volume of the Qosmio AV Controller and the Front operation panel.

■ Sensitivity setting

Use the slider to change the sensitivity of the Qosmio AV Controller and the Front operation panel.

■ Scroll speed setting

Use the slider to change the cursor moving speed of the Fast move buttons.

Remote Controller

Provided with all models. It can operate AV related functions.

Using the Fingerprint Sensor

This product has a fingerprint utility installed for the purpose of enrolling and recognizing fingerprints. By enrolling the ID and password onto the fingerprint authentication feature, it is no longer necessary to input the password from the keyboard. Fingerprint feature enables you to:

■ Logon to Windows and access a security enabled homepage through

Internet Explorer.

■ Files and folders can be encrypted/decrypted and third party access to

them prevented.

■ Disable the password-protected screen-saver when returning from a

power-saving mode such as Sleep Mode.

■ Authentication of the User Password (and, if applicable, the HDD(Hard

Disk Drive) Password) when booting up the computer (Power-on Security).

■ Single Sign-on facility

User’s Manual 4-3

Page 70

Qosmio G40

How to Swipe the Finger

Using the following steps when swiping fingers for fingerprint registration or authentication will help to minimize authentication failures:

Align the first joint of the finger at the center of the sensor, then lightly touch the sensor and swipe finger horizontally towards you until the sensor surface becomes visible. In performing this process, you should also take care to ensure that the center of your fingerprint is on the sensor.

The following illustrations show the recommended way to swipe your finger over the fingerprint sensor.

■ Avoid swiping with your finger stiff or pressed too hard onto the sensor,

and take care to ensure that the center of the fingerprint is touching the sensor before swiping. Either of these conditions may cause fingerprint reading to fail.

■ Check the center of the fingerprint whirl before swiping and then

ensure this is swiped along the center line of the sensor.

■ There is a possibility of authentication failures if the finger is swiped too

quickly or too slowly - follow any on-screen instructions to adjust the speed used during the swipe process.

Sensor

Swipe the finger

4-4 User’s Manual

Page 71

Points to note about the Fing erprint Sensor

Please be aware of the following considerations when using the fingerprint sensor. A failure to follow these guidelines might result in damage to the sensor, sensor failure, fingerprint recognition problems or a lower fingerprint recognition success rate.

■ Do not scratch or poke the sensor with your nails or any hard or sharp

objects.

■ Do not press the sensor strongly.

■ Do not touch the sensor with a wet finger or any wet objects - keep the

sensor surface dry and free from water vapor.

■ Do not touch the sensor with a soiled or dirty finger as minute foreign

particles of dust and dirt may scratch it.

■ Do not paste stickers or write on the sensor.

■ Do not touch the sensor with a finger or any other object which may

have a build-up of up static electricity on it.

Observe the following before you place your finger on the sensor whether for fingerprint enrollment/registration or recognition.

■ Wash and dry your hands thoroughly.

■ Remove static electricity from your fingers by touching any metal

surface. Static electricity is a common cause of sensor failures, especially when the weather is dry.

■ Clean the sensor with a lint-free cloth - do not use detergent or any

other chemicals to clean the sensor.

■ Avoid the following finger conditions for enrollment or recognition as

they may result in fingerprint enrollment errors or a drop in the fingerprint recognition success rate

■ Soaked or swollen finger, for example as may occur after

taking a bath.

■ Injured finger

■ Wet finger

■ Soiled or oily finger

■ Extremely dry skin condition on finger

Observe the following to improve the fingerprint recognition success rate.

■ Enroll two or more fingers.

■ Enroll additional fingers if a recognition failure often occurs when using

already enrolled fingers.

■ Check the condition of your finger - any conditions which have changed

since enrollment, such as injury, rough skin, and extremely dry, wet, soiled, dirty, oily, soaked or swollen fingers, may lower the recognition success rate. Also if the fingerprint is worn down or the finger becomes thinner or fatter, the recognition success rate may be lowered.

■ As the fingerprint for each finger is different and unique you should

ensure that only the registered or enrolled fingerprint or fingerprints are used for identification.

Qosmio G40

User’s Manual 4-5

Page 72

Qosmio G40

■ Check the position and speed at which you slide your finger across the

sensor - please refer to the preceding drawing.

■ The fingerprint sensor compares and analyzes the unique

characteristics in a fingerprint. However, there may be instances where certain users are unable to register their fingerprints due to insufficient unique characteristics in their fingerprints.

■ The recognition success rate may differ from user to user.

How to Delete the Fingerprint Data

Saved fingerprint data is stored in special non-volatile memory inside the fingerprint sensor. Therefore, if you give the computer to someone else, or dispose of it in any way, the following process is recommended to delete your fingerprint information:

1. To run this program, click Start -> All Programs -> Protector Suite QL -> Control Center.

2. The Protector Suite Software screen is displayed.

3. Click Fingerprints and click Delete.

4. Click Settings and click Fingerprint Storage Inspector.

5. The Fingerprint Storage Inspector screen will be displayed. If fingerprint data is displayed as part of the list, simply select all of this information and then Remove.

6. Check whether all of the fingerprint data was deleted on the Fingerprint Storage Inspector screen.

In use, please be aware of the following limitations of the fingerprint sensor:

■ A warning message will be displayed when recognition is abnormal or

recognition is not successful within a fixed duration.

■ The fingerprint sensor compares and analyzes the unique

characteristics in a fingerprint. However, there may be instances where certain users are unable to register their fingerprints due to insufficient unique characteristics in their fingerprints.

■ The recognition success rate may differ from user to user.

■ Toshiba doe s not guarantee that this fingerprint recognition technology

will be error-free.

■ Toshiba doe s not guarantee that the fingerprint sensor will recognize

the enrolled user or accurately screen out unauthorized users at all times. T oshiba is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.

4-6 User’s Manual

Page 73

Points to note about the Fingerprint Utility software

You are able to backup saved fingerprint data and information within the PasswordBank by using the Import or Export User Data facility under the fingerprint management software. However, please be aware that any encrypted files cannot be backup within FileSafe using this function - in these instances it is recommended that you backup these files to external media using standard file copy processes.

The Encrypting File System (EFS) is a Windows Vista™ feature. If a file is encrypted using EFS, it cannot be encrypted further using the

fingerprint authentication function. In the Help File, it is stated that this software’s PasswordBank function can

be used for managing security relating to the Internet as well as for general applications. However, please be aware that the Internet PasswordBank function within the fingerprint utility provided on this computer can only be used with Microsoft’s Internet Explorer software.

Set Up Procedure

Please use the following procedure when first using fingerprint authentication.

Fingerprint Registration

You should initially enroll the required authentication data using the User Enrollment Wizard.

Qosmio G40

■ In use, the fingerprint authentication system will use the same

username and password as defined within the Windows operating system. If no Windows password has been configured, you must do this before starting the fingerprint registration process.

■ Up to twenty-one fingerprint patterns can be registered on this sensor.

1. To run this program, click Start -> All Programs -> Protector

Suite QL -> User Enrollment.

You are also able to start the User Enrollment Wizard by using the following methods.

■ Click the Protector Suite QL icon in the Task Bar.

■ Swipe your finger across the Fingerprint Sensor.

2. Click Next.

3. At the User’s Password screen which is then displayed, you should

ensure that the same Windows username is displayed before entering the appropriate password into the Enter your password field. Once this has been done, click Next.

4. At the Hints for Fingerprint Enrollment screen, confirm the message

displayed and ensure that there is a check mark in the Run Interactive Tutorial box. Once this has been done, click Next.

User’s Manual 4-7

Page 74

Qosmio G40

5. At the Correct Swipe Procedure screen, confirm the message that is displayed and then click Next.

6. At the Scanning Practice screen, you are able to practice swiping your finger to ensure you use the correct method. Once you have finished practicing, click Next.

7. At the User’s Fingers screen, select the finger that you wish to enroll from the illustration and then click Next. On this screen please be aware that any previously enrolled fingerprints would have green check marks, while the fingerprint that you are about to enroll will have a red check mark. If any of the previously enrolled fingerprints is selected again, the latest information will be enrolled and any previous information over-written.

8. At Advanced Security screen, select whether you wish to enable the security function, and then click Next.

9. At Finalization screen, click Finish - this will complete the fingerprint registration process.

Windows Logon via Fingerprint Authentication

If required, you are also able to use fingerprint authentication in place of the usual Windows logon process using your username and password. This method is especially useful where there are many users using the same computer as it removes the need for actual user selection when the system is started.

Fingerprint Authentication Procedure

1. Start up the computer.

2. At the Logo n Authorization screen, choose any of the enrolled fingers and swipe the fingerprint on the sensor - if the authentication process is successful, the user will automatically be logged in to Windows.

If the fingerprint authentication process fails you will need to log into Windows using the appropriate username and password. In addition, you should use this manual login process if fingerprint authentication fails for three consecutive tries - a warning message will be displayed when authentication is not normal or is not successful within a fixed duration.

4-8 User’s Manual

Page 75

Fingerprint Power-on Security

General

The fingerprint authentication system can be used to replace the keyboard based password authentication system that is used when the computer is turned on.

If you do not want to use the fingerprint authentication system for password authentication when the computer is turned on, but instead prefer to use the keyboard entry method instead, simply press the BACK SPACE key when the Fingerprint Power-on Security screen is displayed. Using this process will switch the password input screen across to the keyboard based entry screen.

■ You must ensure that you use the TOSHIBA Password Utility to

register a User Password before using the Fingerprint Power-on Security and its extended function to allow fingerprints to be used to access the computer when it is turned on.

■ If the fingerprint authentication process fails five times, a preset time

limit is exceeded, or you press the BACK SPACE key , [Password =] will be displayed on the screen and you will have to enter either the User Password or Supervisor Password manually in order to start the computer.

■ When swiping your finger, please ensure that you do it slowly and at a

constant speed. If you find that this does not improve the authentication rate, you should try to adjust the speed at which the finger is swiped.

■ If there are any changes in the environment or settings related to

authorization, you will be required to provide authorization information such as a User Password (and, if applicable, the HDD(Hard Disk Drive) password).

Qosmio G40

How to Enable Fingerprint Power-on Security Settings

It is necessary to first enroll your fingerprint with the Protector Suite QL application prior to enabling and configuring the Fingerprint Power-on Security System. You should check that your fingerprint is enrolled before configuring the settings (please refer to the Manual for Fingerprint Registration/Enrollment for further instructions).

1. Swipe your finger across the fingerprint sensor.

2. MENU will appear in the lower right corner of the screen. Swipe your

finger on the fingerprint sensor and then select Control Center from the items presented in this menu.

3. At the Fingerpri nt Software Management screen, click Settings and

then click Power-on Security.

4. At the Power-on Security screen, place a check mark in the Replace

the power-on and hard disk drive passwords with the fingerprint sensor setting and then click OK.

User’s Manual 4-9

Page 76

Qosmio G40

Fingerprint Single Sign-on Feature

General

This is a feature that allows the user to complete the authentication for both the User/BIOS Password and logging onto Windows using only one fingerprint authentication when booting up. It is necessary to register the User/BIOS Password and Windows Logon Password before using the Fingerprint Power-on Security and this Fingerprint Single Sign-on Feature. Please use the TOSHIBA Password Utility to register your User/BIOS Password. If Windows Logon is not the default for your system, see Manual to register your Windows Logon Password.

Only one fingerprint authentication is required to replace the User/BIOS Password and the Windows Logon Password.

How to Enable Fingerprint Single Sign-on Feature

It is necessary to first enroll your fingerprint with the Protector Suite QL application prior to enabling and configuring the Fingerprint Single Sign-on feature. You should check that your fingerprint is enrolled before configuring the settings (please refer to the Manual for Fingerprint Registration/Enrollment for further instructions).

1. Swipe your finger across the fingerprint sensor.

2. MENU will appear in the lower right corner of the screen. Swipe your finger on the fingerprint sensor and then select Control Center from the items presented in this menu.

3. At the Fi ng e rp rint Software Management screen, click Settings and then click System Settings.

4. At the Protector Suit e Settings screen, place a check mark in the Allow power-on security single sign-on setting within Enable logon support and then click OK.

Fingerprint utility limitations

TOSHIBA does not guarantee that the fingerprint utility technology will be completely secure or error-free, or that it will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the fingerprint software.

■ The fingerprint sensor compares and analyzes the unique

characteristics in a fingerprint. However, there may be instances where certain users are unable to register their fingerprints due to insufficient unique characteristics in their fingerprints.

■ The recognition success rate may differ from user to user.

4-10 User’s Manual

Page 77

Web Camera

Web Camera is a device that allows you to record video or take

photographs with your computer. You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. Camera Assistant Software will help you to add various video effects to your video or photograph.

Enables the transmission of video and use of video chat via the internet using specialized applications.

The effective pixel count for this web camera is 1.92 million. Please refer to the Camera Assistant Software Online Help for details.

Qosmio G40

Web Camera

Microphone

Web Ca mera

Web Camera LED

User’s Manual 4-11

Page 78

Qosmio G40

■ Do not point the web camera directly at the sun.

■ Do not touch or press strongly on the web camera lens. Doing so may

reduce image quality. Use an eyeglass cleaner (cleaner cloth) or other soft cloth to clean the lens if it becomes dirty.

■ Setting the [Size] to more than “800x600” will cause a larger amount of

data to be written to the hard disk drive and may interfere with smooth recording.

■ When recording in dimly lit environments, the following procedure can

be used to select “Night Mode” which allows for brighter images with less noise.

1. Click the Properties button on the [Web Camera] menu.

2. Check Night Mode on the [Options] tab.

3. Click the OK button. The number of frames per second is lowered when “video recording” in

“Night Mode”. This may result in the playback of the recorded video file seeming unsmooth.

Using HD DVD-ROM drive and HD DVD-R drives

This section describes the features and use of HD DVD-ROM drive and HD DVD-R drives.

Please refer to the included Qosmio HD DVD Guide for more information on using the HD DVD-ROM drive and HD DVD-R drives.

This computer is equipped with a full-size HD DVD-ROM drive or a HD DVD-R drive module that lets you record data to rewritable CD/DVDs as well as run 12cm (4.72") CD/DVD/HD DVDs and 8cm (3.15") CD/DVDs without using an adaptor.

You should use the HD DVD playback software in order to view HD DVD Video media.

If you have a HD DVD-ROM drive or a HD DVD-R drive, please also refer to the Writing CD/DVD/HD DVDs on HD DVD-R drives section for precautions on writing to CD’s, DVD’s and HD DVD’s.

If you have a HD DVD-ROM drive or a HD DVD-R drive, please refer to the Qosmio HD DVD Guide for playback to HD DVD.

4-12 User’s Manual

Page 79

Loading discs

To load CD/DV D/HD DVD’s, follow the steps as listed below.

1. When the computer’s power is on, press the eject button to open the

disc tray slightly.

Eject button

Pressing the eject button

2. Grasp the disc tray gently and pull until it is fully opened.

Qosmio G40

Disc tray

Pulling the disc tray open

3. Lay the CD/DVD/HD DVD, label side up, in the disc tray.

Laser lens

Inserting a CD/DVD/HD DVD

User’s Manual 4-13

Page 80

Qosmio G40

When the disc tray is fully opened, the edge of the computer will extend slightly over the area where you insert the media. Therefore, when loading a CD, DVD, or HD DVD you will need to turn it slightly at an angle when you place it in the disc tray. After loading the CD/DVD/HD DVD you should ensure that it is properly positioned over the central spindle and that it lies flat within the tray.

■ Do not touch either the laser lens or the area immediately around it -

doing so could cause misalignment and may damage the drive.

■ Make sure that no foreign objects are inserted into or otherwise enter

the drive. Check the disc tray, especially the area behind the front edge, to ensure that there are no foreign objects or material present before closing the drive.

4. Press the center of the CD/DVD/HD DVD gently until you feel it click into place on the center spindle. The disc should be slightly below the top of the spindle and flush with the spindle base.

5. Press the center of the disc tray in order to close it - the tray will click into place when it is locked.

If the CD/DVD/HD DVD is not seated properly when the disc tray is closed, you may find that the media itself might become damaged, and/or the disc tray might not open fully when you next press the eject button.

Removing discs

To remo ve CD/DVD/HD DVD’s, follow the steps as listed below.

Do not press the eject button while the computer is accessing the media in the drive, instead wait for the indicator to go out before you open the disc tray. In addition, if the CD/DVD/HD DVD media is spinning when you open the tray, wait for it to fully stop before you remove it.

1. When the computer’s power is on, press the eject button to open the disc tray slightly and then gently pull it out of the system until it is fully opened.

After the disc tray has opened slightly, you should wait for a moment to ensure the CD/DVD/HD DVD media has stopped spinning before you fully open the tray.

4-14 User’s Manual

Page 81

Qosmio G40

2. The CD/DVD/HD DVD media will extend slightly over the sides of the

disc tray in order that you can hold it. Grasp it carefully by its edges and lift it vertically off of the central spindle and out of the tray.

Removing a CD/DVD/HD DVD

3. Press the center of the disc tray in order to close it - the tray will click

into place when it is locked.

How to remove a CD/DVD/HD DVD when the disc tray will not open

Pressing the eject button will not open the disc tray when the computer is turned off although, in these circumstances, you can open the tray by inserting a slender object such as a straightened paper clip about 15mm into the eject hole just to the right of the drive’s eject button.

Disc tray LED

Slender object about 15 mm Diameter 1.0 mm

Manual release with the eject hole

Eject button

Eject hole

You must ensure that you turn off the power before you use the eject hole. If the CD/DVD/HD DVD media is spinning when you open the disc tray, it may fly off of the spindle and cause injury.

User’s Manual 4-15

Page 82

Qosmio G40

HD DVD

Summary

HD DVD Media

This section describes the features and use of HD DVD.

Please refer to the included Qosmio HD DVD Guide for more information on the HD DVD.

HD DVD allows users to enjoy video, concerts and other packaged content by taking advantage of its large amount of storage space and high-quality audio and video. HD DVD also allows for the storage of long video when combined with the latest video compression technologies.

The storage capacity and data transfer rate of HD DVD is superior to standard DVD, with two types of playback-only discs in single-sided single-layer 15GB and single-sided dual-layer 30GB (Gigabyte) formats.

■ Unfinalized DVDs created on home DVD recorders may not be

playable on the computer.

■ When inserting an unfinalized DVD-R DL disc into the computer,

Windows Vista™ may automatically finalize the disc and prevent further writing.

■ Like CD and DVD, HD DVD is divided into the read-only and recordable

formats listed below.

■ Some media cannot be used with this product. Be sure to thoroughly

read section the HD DVD-ROM drive, Chapter 2, before using this product.

■ HD DVD-Video: For video playback. Used to store movies and other

video.

■ HD DVD-ROM: Read-only media.

■ HD DVD-R: A recordable media which can be written to only once.

■ HD DVD (Twin format disc): Has both HD DVD and DVD recordable

layers.

4-16 User’s Manual

Page 83

Qosmio G40

Media Structures and Capacity

HD DVD Recordable Surface Recordable Layer Structure Capacity

Single-sided Single-Layer

Single-sided Dual-Layer

Double-sided Single-Layer

Double-sided Dual-Layer

HD DVD (Twin format disc) Recordable Surface Recordable Layer Structure Capacity

Single-sided Dual-Layer

HD DVD Recordable Layer Only 15GB

HD DVD Recordable Layer Only 30GB

HD DVD Recordable Layer Only 60GB

HD DVD Recordable Layer 15GB DVD Recordable Layer 4.7GB

Writing CD/DVD/HD DVDs on HD DVD-R drives

You can use the HD DVD-R drive to write data to either CD-R, CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW, DVD-RAM, HD DVD-R or HD DVD-R (Dual Layer) discs.

TOSHIBA Disc Creator and Ulead DVD Movie Fa c to ry ar e pro v i d ed as writing software with this computer.

■ Please refer to the Writable discs, Chapter 2 for details about the types

of writable CD, DVD and HD DVD discs that can be supported by this computer.

■ Do not turn off the power to the optical disc drive while the computer is

accessing it as this may cause you to lose data.

■ CD-R/RW media cannot be accessed using the Create CD/DVD option

in Media Center.

■ To write data to CD-R/-RW media, use the TOSHIBA Disc Creator

feature that is installed on your computer.

User’s Manual 4-17

Page 84

Qosmio G40

Important message

Legal Footnotes

When writing information to media using an optical drive, you should always ensure that you connect the AC adaptor to a live power socket. It is possible that, if data is written while powered by the battery pack, the write process may sometimes fail due to low battery power - in these instances data loss may occur.

Before you write or rewrite to any of the media supported by the HD DVD-R drive, please read and follow all of the setup and operating instructions in this section. If you fail to do so, you may find that the HD DVD-R drive may not function properly, and you may fail to write or rewrite information successfully - this may cause you to either lose data or incur other damage to the drive or media.

TOSHIBA does not bear responsibility for the following:

■ Damage to any CD-R, CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW,

DVD+R, DVD+R (Double Layer), DVD+RW, DVD-RAM or HD DVD-R disc that may be caused by writing or rewriting with this product.

■ Any change or loss of the recorded contents of CD-R, CD-RW, DVD-R,

DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW, DVD-RAM or HD DVD-R media that may be caused by writing or rewriting with this product, or for any business profit loss or business interruption that may be caused by the change or loss of the recorded contents.

■ Damage that may be caused by using third party equipment or

software.

Given the technological limitations of current optical disc writing drives, you may experience unexpected writing or rewriting errors due to disc quality or problems with hardware devices. In view of this, it is good practice to make two or more copies of important data, in case of any undesired change or loss of the recorded contents.

4-18 User’s Manual

Page 85

Before writing or rewriting

■ Based on TOSHIBA’s limited compatibility testing, we suggest the

following manufacturers of CD-R, CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW, DVD-RAM, HD DVD-R (Single Layer) or HD DVD-R (Dual Layer) media, however, it must be noted that disc quality can affect write or rewrite success rates. Please also be aware that in no event does TOSHIBA guarantee the operation, quality or performance of any disc.

CD-R:

TAIYO YUDEN CO., LTD. MITSUBISHI CHEMICAL CORPORATION RICOH Co., Ltd.

CD-RW: (Multi-Speed and High-Speed)

MITSUBISHI CHEMICAL CORPORATION RICOH Co., Ltd.

CD-RW: (Ultra-Speed)

MITSUBISHI CHEMICAL CORPORATION

DVD-R:

DVD Specifications for Re cordable Disc for General Version 2.0

TAIYO YUDEN CO., LTD. Matsushita Electric Industrial Co., Ltd

Qosmio G40

DVD-R (Dual Layer):

MITSUBISHI CHEMICAL CORPORATION

DVD+R:

MITSUBISHI CHEMICAL CORPORATION RICOH Co., Ltd.

DVD+R (Double Layer): (Double Layer Recordable drive only)

MITSUBISHI CHEMICAL CORPORATION

DVD-RW:

DVD Specifications for Recordable Disc for Version 1.1 or version 1.2

VICTOR COMPANY OF JAPAN.LIMITED MITSUBISHI CHEMICAL CORPORATION

DVD+RW:

MITSUBISHI CHEMICAL CORPORATION RICOH Co., Ltd.

User’s Manual 4-19

Page 86

Qosmio G40

DVD-RAM:

DVD Specifications for DVD-RAM Disc for Version 2.0, Version 2.1 or Version 2.2

Matsushita Electric Industrial Co., Ltd. Hitachi Maxell Ltd.

HD DVD-R (Single Layer):

MITSUBISHI CHEMICAL CORPORATION (Verbat im) Hitachi Maxell Ltd.

HD DVD-R: (Dual Layer)

MITSUBISHI CHEMICAL CORPORATION (Verbat im)

■ This drive cannot use discs that allow writing faster than 16x speed

(DVD-R and DVD+R media), 6x speed (DVD-RW media), 8x (DVD+RW media), 5x speed (DVD-RAM media), 4x speed (DVD-R (Dual Layer) media) and 8x speed (DVD+R (Double Layer media).

■ Some types and formats of DVD-R (Dual Layer) and DVD+R (Double

Layer) discs may be unreadable.

■ 2.6GB and 5.2GB DVD-RAM media cannot be read from or written to.

■ DISC created in DVD-R (Dual Layer) format4 (Layer Jump Recording)

cannot be read.

■ If the disc is poor in quality, or is dirty or damaged, writing or rewriting

errors may be noted - ensure that you check all discs for dirt or damage before you use them.

■ The actual number of rewrites to CD-RW, DVD-RW, DVD+RW or

DVD-RAM media will be affected by the quality of the disc itself and the way in which it is used.

■ There are two types of DVD-R media available, authoring discs and

general use discs. Do not attempt to use authoring discs as only general use discs can be written to by a computer drive.

■ Y ou can use both DVD-RAM discs that can be removed from a cartridge

and DVD-RAM discs designed without a cartridge.

■ You may find that other computer DVD-ROM drives or other DVD

players may not be able to read DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW or HD DVD-R discs.

■ Data written to a CD-R, DVD-R, DVD-R (Dual Layer), DVD+R, DVD+R

(Double Layer) or HD DVD-R discs cannot be deleted either in whole or in part.

■ Data deleted/erased from a CD-RW, DVD-R W , DVD+R W , DVD-RAM or

HD DVD-R disc cannot be recovered. You must check the content of the disc carefully before you delete it, taking care that, if multiple drives that can write data to discs are connected, you do not delete data from the wrong one.

4-20 User’s Manual

Page 87

Qosmio G40

■ In writing to DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R

(Double Layer), DVD+RW, DVD-RAM or HD DVD-R media, some space is required for file management, so you may not be able to write to the full capacity of the disc.

■ Since the disc is based on the DVD standard, it might be filled with

dummy data if the written data is less than about 1GB. Therefore, in these circumstance, even if you write only a small amount of data, it might take additional time to fill in the dummy data.

■ When multiple drives that can write data to discs are connected,

be sure that you do not write to or delete data from the wrong drive.

■ Be sure to connect the AC adaptor to the computer before you write or

rewrite any information.

■ Before you enter either Sleep Mode or Hibernation Mode, take care to

ensure that any DVD-RAM writing has been completed. In this instance, writing is finished if you can eject the DVD-RAM media.

■ Be sure to close all other software programs except for the writing

software itself.

■ Do not run software such as a screen saver which can put a heavy load

on the processor.

■ Operate the computer at its full power settings - do not use any

power-saving features.

■ Do not write information while virus checking software is running,

instead wait for it to finish, then disable the virus protection applications, including any software that checks files automatically in the background.

■ Do not use any hard disk utilities, including those that are intended to

enhance hard disk drive access speeds, as they may cause unstable operation and damage data.

■ CD-RW (Ultra Speed +) media should not be used as data may be lost

or damaged.

■ You should always write from the computer’s hard disk drive onto the

CD/DVD/HD DVD - do not try to write from shared devices such as a server or any other network device.

■ Writing with software other than TOSHIBA Disc Creator has not been

confirmed, therefore operation with other software applications cannot be guaranteed.

User’s Manual 4-21

Page 88

Qosmio G40

When writing or rew riting

Please observe the following points while you write or rewrite data to CD-R, CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW, DVD-RAM or HD DVD-R media:

■ Always copy data from the hard disk drive to the optical media - do not

use the cut-and-paste function as the original data will be lost if there is a write error.

■ Do not perform any of the following actions:

■ Change users in the Windows Vista™ operating system.

■ Operate the computer for any other function, including such tasks as

using a mouse or Touch Pad, or closing/opening the display panel.

■ Start a communication application such as a modem.

■ Apply impact or vibration to the computer.

■ Install, remove or connect external devices, including such items as

a PC Card, SD/SDHC memory card, miniSD/microSD Card, ExpressCard, Memory Stick/Memory Stick PRO/Memory Stick PRO Duo, xD picture card, MultiMediaCard, USB device, external monitor, i.LINK device, or an optical digital device.

■ Use the audio/video control button to reproduce music or voice.

■ Open the optical disc drive.

■ Do not use shut down, log off, Sleep Mode or Hibernation Mode

functions while writing or rewriting.

■ Make sure that the write/rewrite operation is completed before going

into either Sleep Mode or Hibernation Mode (writing is completed if you can remove an optical media on the HD DVD-R drive).

■ If the media is of poor quality, or is dirty or damaged, writing or rewriting

errors may occur.

■ Set the computer on a level surface and avoid places subject to

vibration such as airplanes, trains or cars. In addition, do not use the computer on an unstable surface such as a stand.

■ Keep mobile phones and other wireless communication devices away

from the computer.

4-22 User’s Manual

Page 89

TOSHIBA Disc Creator

Please be aware of the following limitations when you use the TOSHIBA Disc Creator:

■ DVD Video cannot be created using TOSHIBA Disc Creator.

■ DVD Audio cannot be created using TOSHIBA Disc Creator.

■ You cannot use TOSHIBA Disc Creator’s “Audio CD for Car or Home

CD Player” function to record music to DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW or HD DVD-R media.

■ Do not use the “Disc Backup” function of TOSHIBA Disc Creator in

order to copy DVD Video, DVD-ROM or HD DVD-R material that has copyright protection.

■ DVD-RAM discs cannot be backed up using the “Disc Backup” function

of TOSHIBA Disc Creator.

■ You cannot back up CD-ROM, CD-R or CD-RW media to DVD-R,

DVD-R (Dual Layer), DVD-RW or HD DVD-R media using the “Disc Backup” function of TOSHIBA Disc Creator.

■ You cannot back up CD-ROM, CD-R or CD-RW media to DVD+R,

DVD+R (Double Layer) or DVD+RW media using the “Disc Backup” function of TOSHIBA Disc Creator.

■ You cannot back up DVD-ROM, DVD Video, DVD-R, DVD-R (Dual

Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW or HD DVD-R to CD-R or CD-RW media using the “Disc Backup” function of TOSHIBA Disc Creator.

■ TOSHIBA Disc Creator cannot record in packet format.

■ You might not be able to use the “Disc Backup” function of TOSHIBA

Disc Creator to back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW or HD DVD-R disc that was made with other software on a different optical media recorder.

■ If you add data to a DVD-R, DVD-R (Dual Layer), DVD+R, DVD+R

(Double Layer) or HD DVD-R disc that you have already recorded to, you might not be able to read the added data under some circumstances. For example, it cannot be read under 16-bit operating systems, such as Windows 98SE and Windows Me, while in Windows NT4 you will need Service Pack 6 or later, and in Windows 2000, you will need Service Pack 2. In addition to this, some DVD-ROM and DVD-ROM / CD-R/RW drives cannot read this added data regardless of the operating system.

■ TOSHIBA Disc Creator does not support recording to DVD-RAM discs -

to achieve this you should use Windows Explorer or another similar utility.

■ When you back up a DVD disc, be sure that the source drive supports

recording to DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW media - if this is not th e ca se th en the source disc might not be backed up correctly.

Qosmio G40

User’s Manual 4-23

Page 90

Qosmio G40

■ When you back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R,

DVD+R (Double Layer), DVD+RW or HD DVD-R disc, be sure to use the same type of disc.

■ You cannot partially delete any data written to a CD-RW, DVD-RW,

DVD+RW disc.

Data Verification

To verify that data has been written or rewritten correctly to a data CD/DVD/HD DVD you should follow the steps below before you begin the write/rewrite process:

1. Display the setting dialog box by one of the following two steps:

■ Click the Recording settings button ( ) for writing on the main

toolbar in the Data Disc mode.

■ Select Setting for Each Mode -> Data Disc in the Setting menu.

2. Mark the Verify written data check box.

3. Select File Open or Full Compare mode.

4. Click the OK button.

How to learn more about TOSHIBA Disc Creator

Please refer to the Help files for additional TOSHIBA Disc Creator information.

When Using Ulead DVD MovieFactory® for TOSHIBA

How to make a DVD-Video

There are two ways to create DVD-Video. Use Method 2 when using HD DVD-R media.

Method 1: Simplified steps for making a DVD-Video from video data captured from a DV-Camcorder:

1. Click Start -> All Programs -> DVD MovieFactory for TOSHIBA -> Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory.

2. Insert a DVD-RW or DVD+RW disc in Burner.

3. Click Video Disc -> Burn Video to Disc to launch Direct Recording dialog box, choose DVD-Video/+VR to invoke Straight Capture to Disc Page.

4. Choose DVD-Video format.

5. Choose the capture source is DV.

6. Press Capture button.

4-24 User’s Manual

Page 91

Qosmio G40

Method 2: Simplified steps for making a DVD-Video from adding video source:

1. Click Start -> All Programs -> DVD MovieFactory for TOSHIBA ->

Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory.

2. DVD: Click Video Disc -> New Project to invoke 2nd Launcher, choose

your project type, then invoke DVD MovieFactory. HD DVD: Click Video Disc -> New Project to invoke 2nd Launcher,

choose Create an HD DVD, then invoke DVD MovieFactory.

3. Add source from HD Disk by click Add Video files button to invoke

browser dialog box.

4. Choose the source video then go to Next page to apply Menu.

5. After choose the menu template, press Next button to go to Burning

Page.

6. Choose the output type then press Burn button.

How to learn more about Ulead DVD MovieFactory

Please refer to the Help and Manual files for additional Ulead DVD MovieFactory information.

Important information for use

Note the following limitations when you write Video DVD:

1. Editing digital video

■ Log in with Administrator rights to use DVD MovieFactory.

■ Make sure that your computer is running on AC power when using

DVD MovieFactory.

■ Operate the computer at Full Power. Do not use power-saving

features.

■ While you are editing DVD, you can display preview. However, if

another application is running. The preview might not display properly.

■ DVD MovieFactory cannot edit or play copy protected content.

■ Do not enter Sleep or Hibernation Mode while using DVD

MovieFactory.

■ Do not operate DVD MovieFactory immediately after turning on the

computer. Please wait until all Disc Drive activity has stopped.

■ When recording to a DV-Camcorder, to ensure you capture all of

your data, let the camcorder record for a few seconds before you begin recording your actual data.

■ CD recorder, JPEG functions, DVD-Audio, mini DVD and Video CD

functions are not supported in this version.

■ While recording video to DVD, please close all other programs.

■ Do not run software like a screen saver because it can put a heavy

load on the CPU.

■ Do not support mp3 decode and encode.

User’s Manual 4-25

Page 92

Qosmio G40

2. Before recording the video to DVD

■ When you record DVD disc, please use only discs recommended by

the Drive manufacturer.

■ Do not set the working drive to a slow device like a USB1.1 hard

disk drive or it will fail to write DVD.

■ Do not perform any of the following actions:

■ Operate the computer for any other function, including using a

mouse or Touch Pad, or closing/opening the display panel.

■ Bump or cause vibration to the computer.

■ Use the Mode control button and Audio/Video control button to

reproduce music or voice.

■ Open the DVD drive.

■ Install, remove or connect external devices, including the

following: PC card, SD/SDHC memory card, USB device, external display, i.LINK devices, optical digital devices.

■ Please verify your disc after recording important data.

■ DVD-R/+R/+RW disc cannot be written in VR format.

■ Not support to output VCD and SVCD format.

3. About Straight to Disc

■ Not support to record on DVD-R/+R disc

■ Not support to record DVD+VR format by HDV

■ HDV support to burn DVD-Video only

■ DVD-VR format not support to add Menu

4. About recorded DVDs

■ Some DVD-ROM drives for personal computers or other DVD

players may not be able to read DVD-R/+R/-RW/-RAM discs.

■ If you use an over-used rewritable disc, the full formatting might be

locked. Please use a brand new disc.

4-26 User’s Manual

Page 93

Media care

This section provides tips on protecting data stored on your CD’s, DVD’s, HD DVD’s and floppy disks. Handle your media with care. Following the simple precautions listed below will increase the lifetime of your media and protect the data stored on it.

CD/DVD/HD DVD

1. Store your CD’s, DVD’s and HD DVD’s in the containers they originally

2. Do not bend the CD’s, DVD’s or HD DVD’s.

3. Do not write on, apply a sticker to, or otherwise mar the surface of the

4. Hold the CD, DVD or HD DVD by its outside edge or the edge on the

5. Do not expose the CD,DVD or HD DVD to direct sunlight, extreme heat

6. Do not place heavy objects on your CD’s, DVD’s or HD DVD’s.

7. If your CD’s, DVD’s or HD DVD’s become dusty or dirty, wipe them with

Qosmio G40

came in to protect them and keep them clean.

CD, DVD or HD DVD that contains the data.

center hole - any fingerprints on the surface of the disc can prevent the drive from properly reading data.

or cold.

a clean dry cloth from the center hole outwards - do not wipe in a circular direction. If necessary, you can use a cloth that has been lightly dampened in water or a neutral cleaner but you must not use benzine, thinner or any similar cleaning solution.

Floppy disks

The USB floppy disk drive is available only as an op ti o n .

1. Store your floppy disks in the container they came in to protect them

and keep them clean. If a floppy disk becomes dirty, clean it with a soft, lightly dampened cloth - do not use cleaning fluid.

2. Never open the shutter or touch the magnetic surface of your floppy

disk - doing this could permanently damage it and lose data.

3. Always handle floppy disks with care to prevent the loss of stored data.

4. Always apply the floppy disk label in the correct location and never

apply a new label on top of an existing one - in this instance the label could come loose and damage the floppy drive.

5. Never use a pencil for writing on a floppy disk label as the dust from the

pencil lead could cause a system malfunction if it found its way onto the computer’s components. In this instance, always use a felt-tipped pen and write the label first before applying it to the floppy disk.

6. Never put a floppy disk in a location where water or other liquid may

make contact with it, or where it is excessively damp - either of these conditions could cause data loss.

7. Never use a wet or damp floppy disk - this could damage the floppy disk

drive or other devices within the computer.

User’s Manual 4-27

Page 94

Qosmio G40

TV Tuner

8. Data may be lost if the floppy disk is twisted, bent, or exposed to direct sunlight, extreme heat or cold.

9. Do not place heavy objects on your floppy disks.

10.Do not eat, smoke, or use items such as erasers near your floppy disks as foreign particles inside the jacket of the floppy disk can damage the magnetic surface.

11. Magneti c energy can destroy the data on your floppy disks. In view of this you should keep your floppy disks away from speakers, radios, televisions and other sources of magnetic fields.

Use the My TV feature of Media Center in Windows mode to watch TV programs or record them.

The dimensions and shape of the TV antenna port vary for different regions.

Some models are capable of simultaneously recording 2 different television programs.

■ Some computer models are equipped with a tuner capable of receiving

digital broadcasts. These tuners can receive DVB-T digital broadcasts. Digital broadcasts cannot be received in regions where DVB-T digital broadcasts are not available.

■ Simultaneous reception and recording cannot be used when an

external video device is connected and the above settings are made. Once the external video device is disconnected, simultaneous reception and recording can again be used by following the instructions in Configuring 2 tuners to receive simultaneously.

■ Simultaneous reception and recording cannot be used when the

set-top box is connected and the above settings are made.

■ According to the government regulations, it is not permitted to bring

PAL/SECAM TV tuners into Korea.

Using the TV Tuner

Antenna

■ The quality of sounds and pictures greatly depends on the radio

propagation conditions.

■ When you use your computer in areas where the radio waves are

weak, which results in poor radio receiving conditions, contact the dealer you purchased it from, or use a commercially available antenna booster. Please refer to the manual provided with the booster for details.

4-28 User’s Manual

Page 95

Connecting the Cable

This section describes how to connect the antenna cable to your computer.

Connecting the antenna cable

When lightning occurs, do not touch the antenna line. This may cause an electric shock.

If you have to operate your computer during a thunderstorm and are connecting the TV tuner to an outside antenna, you should operate your computer using AC power mode. The AC adaptor offers some protection against (but does not entirely prevent) possible electric shock caused by lightning. For complete protection, do not operate your computer during a thunderstorm.

1. Save data, shutdown Windows and turn off the power.

2. Connect the antenna cable to the TV antenna port of your computer.

Qosmio G40

TV antenna port

Connecting the antenna cable

Antenna cable

When you have been using a descrambler to receive the programs on cable TV or satellite broadcasting, connect the descrambler to the antenna cable.

User’s Manual 4-29

Page 96

Qosmio G40

Sound system

This section describes some of the audio control functions.

Adjusting System Volume

You can control the overall level of sound using Windows Volume Mixer. To launch Volume Mixer, follow the steps below.

1. Locate the Speaker icon on the task tray.

2. Right-click the Speaker icon on the task tray.

3. Select Open Volume Mixer from the menu.

Click the Device button to display available playback devices. Select Speakers to use the internal speakers for listening. Adjust speaker volume by moving the slider up or down to raise or lower the volume. Click the

Mute button to mute the sound. Y ou may see another control under Applications in Volume Mixer. It is the

control for an application which is currently running. The Windows Sounds is always displayed since it controls the system sounds’ volume.

Changing System Sounds

System sounds are assigned to inform you when certain events happen. This section explains how select an existing scheme or save one you have modified.

To launch the configuration dialog window for system sounds, follow the steps below.

1. Right-click the Speaker icon on the task tray.

2. Select Sounds from the menu.

Realtek HD Audio Manager

You can confirm and change the audio configuration using the Realtek Audio Manager. To launch the Realtek Audio Manager, click Start -> Control Panel -> Hardware and Sound -> Realtek HD Audio Manager.

When you first launch the Realtek Audio Manager, you will see four device tabs. Speakers is the default output device. Microphone is the default input device. To change the default device, click the Set Default Device button under the chosen device tab.

■ Speakers is the default output device. Select it when using the internal

speakers or headphones.

■ Digital Output should be selected when connecting the optical cable to

the S/PDIF jack for playing digital sound on digital audio equipment.

■ HDMI Output should be selected when connecting the HDMI cable to

the HDMI jack for playing digital sound on digital audio equipment.

4-30 User’s Manual

Page 97

Qosmio G40

■ Microphone is the default input device. It should be selected when

using the computer’s internal microphone or an external microphone connected to the microphone jack to record sound.

■ Line In should be selected when connecting the audio cable to the Line

In jack for recording analog sound from audio equipment.

Information

Click the information button to view hardware information, software information, and language setting.

Power Management

The audio controller in your computer can be turned off when the audio function is not used. To adjust the configuration of audio power

management, click the battery button .

■ When audio power management is enabled, the circle button at the

upper left of the Power Management is blue and convex.

■ When audio power management is disabled, the button is black and

concave.

Speaker Configuration

Click the playback button to confirm the internal speakers or the headphone sound is coming from the right direction.

Sound Effects

This section explains how to select various sound effects.

■ Environment - simulates reverberations of sound for familiar

environments around us. You can select an existing preset in the menu.

■ Equalizer - raises or lowers a frequency of sound to simulate a popular

genre of music. You can select an existing preset in the menu.

■ Karaoke - cancels the specific frequency of sound and results in the

Vocal Cancellation. Clicking the Karaoke icon, lowers the vocal sound within music. Using the arrow buttons will adjust the musical key of the sound.

User’s Manual 4-31

Page 98

Qosmio G40

Modem

Dolby® Home Theater

Dolby Home Theater enhances sound quality when you listen to audio of a music CD or a DVD on your computer.

■ Dolby

Virtual Speaker simulates a 5.1-speaker surround sound listening environment from just two speakers. To enable Dolby Virtual Speaker, click Control Panel -> Hardware and Sound -> Sound -> Speakers -> Dolby -> Dolby Home Theater -> On.

Headphone lets you enjoy a simulated 5.1-channel surround sound experience from any set of headphones without disturbing others. To enable Dolby Virtual Speaker, click Control Panel ->

Hardware and Sound -> Sound -> Speakers -> Dolby -> Dolby Home Theater -> On.

Microphone Effects

Microphone Effects are only found within Microphone window.

■ Noise Suppression reduces background noise and fan noise.

■ Acoustic Echo Cancellation reduces feedback and feedback echo.

Default Format

You can change the sample rate and bit depth of sound.

This section describes how to connect and disconnect the internal modem to and from a telephone jack.

■ Connection to any communication line other than an analog phone line

could cause a computer system failure.

■ Connect the built-in modem only to ordinary analog phone lines.

■ Never connect the built-in modem to a digital line (ISDN).

■ Never connect the built-in modem to the digital connector on a

public telephone or to a digital private branch exchange (PBX).

■ Never connect the built-in modem to a key telephone system for

residences or offices.

■ Never operate your computer on AC power during a thunderstorm. If

you see lightning or hear thunder, immediately turn off the computer. An electric surge caused by the storm, may result in a system failure, loss of data or hardware damage.

■ Modem functions cannot be used in models which are not equipped

with a modem.

4-32 User’s Manual

Page 99

Region selection

Telecommunication regulations vary from one region to another, so you will need to make sure the internal modem’s settings are correct for the region in which it will be used.

The built-in modem can be used only in specified countries and regions. Using the modem in an area not specified for use may cause a system failure. Check the specified areas carefully before using it.

To select a regio n, follow the steps as detailed below:

1. Click Start -> All Programs -> TOSHIBA -> Networking -> Modem

Region Select.

If it is available, do not use the Country/Region Select function included as part of the modem setup utility within the Control Panel - if you change the country/region setting this way you may find that the change does not take effect.

2. The Region Selection icon will appear in the Windows Task Bar.

3. Click the icon with the primary (left) mouse button to display a list of

regions that the modem supports, together with a sub-menu which details telephony location information - a check mark will appear next to the currently selected region and telephony location.

4. Select either a region from the region menu or a telephony location from

the sub-menu.

■ When you click a region it becomes the modem’s default selection

for any new dialling locations that are created within the Windows Control Panel (Phone and Modem Options).

■ When you select a telephony location, the corresponding region is

automatically selected and becomes the modem’s default setting.

Qosmio G40

Properties menu

Click the icon with the secondary (right) mouse button in order to display a Properties menu on the screen.

User’s Manual 4-33

Page 100

Qosmio G40

Setting

Modem Selection

Within the Properties menu you can are able to either enable or disable the following settings:

AutoRun Mode

Allows you to configure whether the Modem Region Select utility starts automatically whenever you start up the operating system.

Open the Dialing Properties dialog box after selecting region.

Allows you to configure whether the dialing properties dialog box will be displayed automatically after you have selected a region.

Location list for region selection.

Displays a sub-menu appears which details location information.

Open dialog box, if the modem and Telephony Current Location region code do not match.

Displays a warning if the current settings for both region code and telephony location are different.

If the computer cannot recognize the internal modem, a dialog box is displayed from which you should select the appropriate communications port for your modem to use.

Dialing Properties

You should select this item in order to display the dialing properties.

If you are using the computer in Japan, the Telecommunications Business Law requires that you select Japan region mode. It is illegal to use the modem in Japan with any other selectio n .

4-34 User’s Manual

Toshiba G40 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Table of Contents

Preface

General Precautions

Equipment checklist

Hardware

Special features

TOSHIBA Value Added Package

Utilities and Applications

Options

Front with the display closed

Left side

Right side

Back

Underside

Front with the display open

System indicators

Optical disc drives

AC adaptor

Connecting the AC adaptor

Opening the display

Turning on the power

St arting up for the first time

Turning off the power

Restarting the computer

System Recovery Options

Using the Touch Pad

AV Controller

Using the Fingerprint Sensor

Web Camera

Using HD DVD-ROM drive and HD DVD-R drives

HD DVD

Writing CD/DVD/HD DVDs on HD DVD-R drives

Media care

TV Tuner

Sound system

Modem