Toshiba ES96R2, iES16, iES32, ES48, ES8 User Manual

®
Voice Processing Systems
Digital Solutions Division
Stratagy iES16, iES32, ES8,
ES48, ES96R2
User Guide
April 2005
Toshiba America Information Systems, Inc., Digital Solutions Division, reserves the right, without prior notice, to revise this information publication for any reason, including, but not limited to, utilization of new advances in the state of technical arts or to simply change the design of this document.
Further, Toshiba America Information Systems, Inc., Digital Solutions Division, also reserves the right, without prior notice, to make such changes in equipment design or components as engineering or manufacturing methods may warrant.
STG-UG-ESALL-VC
Version C, April 2005
© Copyright 2005 Toshiba America Information Systems, Inc. Digital Solutions Division
All rights reserved. No part of this manual, covered by the copyrights hereon, may be reproduced in any form or by any means—graphic, electronic, or mechanical, including recording, taping, photocopying, or information retrieval systems—without express written permission of the publisher of this material.
Trademarks
Strata is a registered trademark of Toshiba Corporation. CIX is a trademark of Toshiba Corporation.
Stratagy is a registered trademark of Toshiba America Information Systems, Inc.
Microsoft, Windows and Windows NT are registered trademarks of the Microsoft Corporation.
Trademarks, registered trademarks, and service marks are the property of their respective owners.
TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TAIS”)
Digital Solutions Division License Agreement
IMPORTANT: THIS LICENSE AGREEMENT (“AGREEMENT”) IS A LEGAL AGREEMENT BETWEEN YOU (“YOU”) AND TAIS. CAREFULLY READ THIS LICENSE AGREEMENT. USE OF ANY SOFTWARE OR ANY RELATED INFORMATION (COLLECTIVELY, “SOFTWARE”) INSTALLED ON OR SHIPPED WITH A TAIS DIGITAL SOLUTIONS PRODUCT OR OTHERWISE MADE AVAILABLE TO YOU BY TAIS IN WHATEVER FORM OR MEDIA, WILL CONSTITUTE YOUR ACCEPTANCE OF THESE TERMS, UNLESS SEPARATE TERMS ARE PROVIDED BY THE SOFTWARE SUPPLIER. IF YOU DO NOT AGREE WITH THE TERMS OF THIS LICENSE AGREEMENT, DO NOT INSTALL, COPY OR USE THE SOFTWARE AND PROMPTLY RETURN IT TO THE LOCATION FROM WHICH YOU OBTAINED IT IN ACCORDANCE WITH APPLICABLE RETURN POLICIES. EXCEPT AS OTHERWISE AUTHORIZED IN WRITING BY TAIS, THIS SOFTWARE IS LICENSED FOR DISTRIBUTION THROUGH TAIS AUTHORIZED CHANNELS ONLY TO END-USERS PURSUANT TO THIS LICENSE AGREEMENT.
1. License Grant. The Software is not sold; it is licensed upon payment of applicable charges. TAIS grants to you a personal, non-transferable and non-exclusive right to use the copy of the Software provided under this License Agreement. You agree you will not copy the Software except as necessary to use it on one TAIS system at a time at one location. Modifying, translating, renting, copying, distributing, printing, sublicensing, transferring or assigning all or part of the Software, or any rights granted hereunder, to any other persons and removing any proprietary notices, labels or marks from the Software is strictly prohibited except as permitted by applicable law; you agree violation of such restrictions will cause irreparable harm to TAIS and provide grounds for injunctive relief, without notice, against you or any other person in possession of the Software. You and any other person whose possession of the software violates this License Agreement shall promptly surrender possession of the Software to TAIS, upon demand. Furthermore, you hereby agree not to create derivative works based on the Software. TAIS reserves the right to terminate this license and to immediately repossess the software in the event that you or any other person violates this License Agreement. Execution of the Software for any additional capabilities require a valid run-time license.
2. Intellectual Property. You acknowledge that no title to the intellectual property in the Software is transferred to you. You further acknowledge that title and full ownership rights to the Software will remain the exclusive property of TAIS and/or its suppliers, and you will not acquire any rights to the Software, except the license expressly set forth above. You will not remove or change any proprietary notices contained in or on the Software. The Software is protected under US patent, copyright, trade secret, and/or other proprietary laws, as well as international treaties. Any transfer, use, or copying of the software in violation of the License Agreement constitutes copyright infringement. You are hereby on notice that any transfer, use, or copying of the Software in violation of this License Agreement constitutes a willful infringement of copyright.
3. No Reverse Engineering. You agree that you will not attempt, and if you employ employees or engage contractors, you will use your best efforts to prevent your employees and contractors from attempting to reverse compile, reverse engineer, modify, translate or disassemble the Software in whole or in part. Any failure to comply with the above or any other terms and conditions contained herein will result in the automatic termination of this license and the reversion of the rights granted hereunder back to TAIS.
4. Limited Warranty. THE SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, TAIS AND ITS SUPPLIERS DISCLAIM ALL WARRANTIES WITH REGARD TO THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF NON-INFRINGEMENT OF THIRD PARTY RIGHTS, THE WARRANTY OF YEAR 2000 COMPLIANCE, AND THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. NEITHER TAIS NOR ITS SUPPLIERS WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE. HOWEVER, TAIS WARRANTS THAT ANY MEDIA ON WHICH THE SOFTWARE IS FURNISHED IS FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP UNDER NORMAL USE FOR A PERIOD OF NINETY (90) DAYS FROM THE DATE OF DELIVERY TO YOU.
5. Limitation Of Liability. TAIS’ ENTIRE LIABILITY AND YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LICENSE AGREEMENT SHALL BE AT TAIS’ OPTION REPLACEMENT OF THE MEDIA OR REFUND OF THE PRICE PAID. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL TAIS OR ITS SUPPLIERS BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, SPECIAL, INCIDENTAL OR INDIRECT DAMAGES FOR PERSONAL INJURY, LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION/DATA, OR ANY OTHER PECUNIARY LOSS OF ANY KIND ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE, EVEN IF TAIS OR ITS SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL TAIS OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM BY A THIRD PARTY.
6. State/Jurisdiction Laws. SOME STATES/JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY MAY LAST, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO SUCH LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU SPECIFIC RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE/JURISDICTION TO STATE/JURISDICTION.
7. Export Laws. This License Agreement involves products and/or technical data that may be controlled under the United States Export Administration Regulations and may be subject to the approval of the United States Department of Commerce prior to export. Any export, directly or indirectly, in contravention of the United States Export Administration Regulations, or any other applicable law, regulation or order, is prohibited.
8. Governing Law. This License Agreement will be governed by the laws of the State of California, United States of America, excluding its conflict of law provisions.
9. United States Government Restricted Rights. The Software is provided with Restricted Rights. The Software and other materials provided hereunder constitute Commercial Computer Software and Software Documentation and Technical Data related to Commercial Items. Consistent with F.A.R. 12.211 and 12.212 they are licensed to the U.S. Government under, and the U.S. Government’s rights therein are restricted pursuant to, the vendor’s commercial license.
10. Severability. If any provision of this License Agreement shall be held to be invalid, illegal or unenforceable, the validity, legality and enforceability of the remaining provisions hereof shall not in any way be affected or impaired.
11. No Waiver. No waiver of any breach of any provision of this License Agreement shall constitute a waiver of any prior, concurrent or subsequent breach of the same or any other provisions hereof, and no waiver shall be effective unless made in writing and signed by an authorized representative of the waiving party.
12. Supplier Software. The Software may include certain software provided by TAIS suppliers. In such event, you agree that such supplier may be designated by TAIS as a third party beneficiary of TAIS with rights to enforce the Agreement with respect to supplier’s software.
YOU ACKNOWLEDGE THAT YOU HAVE READ THIS LICENSE AGREEMENT AND THAT YOU UNDERSTAND ITS PROVISIONS. YOU AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT THIS LICENSE AGREEMENT CONTAINS THE COMPLETE AND EXCLUSIVE AGREEMENT BETWEEN YOU AND TAIS AND SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, OR ANY OTHER COMMUNICATION RELATING TO THE SUBJECT MATTER OF THIS LICENSE AGREEMENT.
Toshiba America Information Systems, Inc. Digital Solutions Division 9740 Irvine Boulevard Irvine, California 92618-1697 United States of America
DSD 020905
5932
Toshiba America Information Systems, Inc.
Digital Solutions Division
Limited Warranty
Toshiba America Information Systems, Inc., (“TAIS”) warrants that this voice processing equipment (except for fuses, lamps, and other consumables) will, upon delivery by TAIS or an authorized TAIS dealer to a retail customer in new condition, be free from defects in material and workmanship for twenty-four (24) months after delivery. This warranty is void (a) if the equipment is used under other than normal use and maintenance conditions, (b) if the equipment is modified or altered, unless the modification or alteration is expressly authorized by TAIS, (c) if the equipment is subject to abuse, neglect, lightning, electrical fault, or accident, (d) if the equipment is repaired by someone other than TAIS or an authorized TAIS dealer, (e) if the equipment’s serial number is defaced or missing, or (f) if the equipment is installed or used in combination or in assembly with products not supplied by TAIS and which are not compatible or are of inferior quality, design, or performance.
Customer will, at its sole cost and expense, provide the necessary Uninterruptible Power Supply (UPS) equipment as specified by TAIS in the Stratagy Voice Processing General Description for use with the Stratagy ES system at all times. System failures and/or damages resulting from either not using a UPS with the Stratagy ES or the use of a UPS not equivalent to that specified by TAIS are not covered by this warranty.
The sole obligation of TAIS or Toshiba Corporation under this warranty, or under any other legal obligation with respect to the equipment, is the repair or replacement by TAIS or its authorized dealer of such defective or missing parts as are causing the malfunction with new or refurbished parts (at their option). If TAIS or one of its authorized dealers does not replace or repair such parts, the retail customer ’s sole remedy will be a refund of the price charged by TAIS to its dealers for such parts as are proven to be defective, and which are returned to TAIS through one of its authorized dealers within the warranty period and no later than thirty (30) days after such malfunction, whichever first occurs.
Under no circumstances will the retail customer or any user or dealer or other person be entitled to any direct, special, indirect, consequential, or exemplary damages, for breach of contract, tort, or otherwise. Under no circumstances will any such person be entitled to any sum greater than the purchase price paid for the item of equipment that is malfunctioning.
To obtain service under this warranty, the retail customer must bring the malfunction of the machine to the attention of one of TAIS’ authorized dealers within the twenty-four (24) month period and no later than thirty (30) days after such malfunction, whichever first occurs. Failure to bring the malfunction to the attention of an authorized TAIS dealer within the prescribed time results in the customer being not entitled to warranty service.
THERE ARE NO OTHER WARRANTIES FROM EITHER TOSHIBA AMERICA INFORMATION SYSTEMS, INC., OR TOSHIBA CORPORATION WHICH EXTEND BEYOND THE FACE OF THIS WARRANTY. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND FITNESS FOR USE, ARE EXCLUDED.
No TAIS dealer and no person other than an officer of TAIS may extend or modify this warranty. No such modification or extension is effective unless it is in writing and signed by the vice president and general manager, Telecommunication Systems Division.

Contents

Introduction
Organization ................................................................................................................ v
Conventions ................................................................................................................ vi
Action/Response Table ....................................................................................... vii
Related Documents/Media ........................................................................................viii
Stratagy eBrochure and Advisor CD-ROM .......................................................viii
Chapter 1 – The Grand Tour
Overview ...................................................................................................................... 2
Features to Personalize Your Mailbox ........................................................................ 4
Message Folders .......................................................................................................... 4
Single Message Folder .......................................................................................... 5
Dual Message Folders ........................................................................................... 5
Multiple Message Folders ..................................................................................... 6
Message Types ............................................................................................................. 8
Forwarded Message .............................................................................................. 8
Reply Message ...................................................................................................... 8
Fax Message .......................................................................................................... 9
E-mail Message ..................................................................................................... 9
Greetings .................................................................................................................... 10
Personal ............................................................................................................... 10
System ................................................................................................................. 10
Busy ..................................................................................................................... 10
Special Delivery Options ........................................................................................... 11
Urgent .................................................................................................................. 11
Private ................................................................................................................. 11
Return Receipt ..................................................................................................... 11
Stratagy ES User Guide 04/05 i
Contents
Chapter 2 –Getting Started
Future Delivery ...........................................................................................................11
Message Destination Selections .................................................................................12
Personal Distribution Lists ...................................................................................12
System Distribution Lists .....................................................................................13
Directory ..............................................................................................................13
User Options ...............................................................................................................14
User Prompts ..............................................................................................................15
Chapter 2 – Getting Started
User Tutorial ...............................................................................................................17
Step 1: Access Your Mailbox ....................................................................................18
Step 2: Record Your Name ........................................................................................20
Step 3: Record Your Personal Greeting ....................................................................21
Step 4: Change Your Security Code ..........................................................................22
Step 5: Exit Your Mailbox or User Mode .................................................................22
Chapter 3 – Play Messages
Access Messages ........................................................................................................24
Playback Controls .......................................................................................................24
Play Messages ............................................................................................................26
Special Functions .......................................................................................................29
Retrieve and Listen to E-mail Messages ....................................................................33
Chapter 4 – Send Messages
Recording Controls .....................................................................................................38
Send a Message ..........................................................................................................39
Forward a Message .....................................................................................................43
Reply to Current Message ..........................................................................................46
Special Delivery Options ............................................................................................48
Future Delivery ...........................................................................................................49
Send a Direct Fax .......................................................................................................50
ii Stratagy ES User Guide 04/05
Chapter 5 –Manage Mailbox
Chapter 5 – Manage Mailbox
Change Greeting ........................................................................................................ 54
Create or Record Over a Personal Greeting ........................................................ 55
Select a Personal Greeting ................................................................................... 57
Review a Personal Greeting ................................................................................ 58
Change User Options .................................................................................................59
Change Do Not Disturb (DND) Setting .............................................................. 60
Change Call Screening Setting ............................................................................61
Change Security Code ......................................................................................... 62
Select Busy Greeting ........................................................................................... 63
Create or Record Over Busy Greeting ................................................................64
Record Your Name .............................................................................................. 66
Change Message Notification ............................................................................. 68
Set Automatic Message Copy .............................................................................70
Review Option Settings ....................................................................................... 73
Manage Personal Distribution Lists ........................................................................... 74
Manage Guest Mailboxes ..........................................................................................76
Use Guest Mailboxes .................................................................................................77
Manage Personal Folders ...........................................................................................78
Contents
Appendix A – Using Stratagy ES with a Strata CIX/CTX
Call Forward .............................................................................................................. 81
Message Waiting ........................................................................................................ 83
Responding to a Lit Msg LED ............................................................................83
Turning On/Off Message Waiting LED on Another Extension .......................... 84
CTX Proprietary Integration ...................................................................................... 84
Soft Key Control of Voice Mail .......................................................................... 84
Call Record to Stratagy ES .................................................................................. 90
Direct Transfer to Voice Mailbox ..............................................................................92
Voice Mail Conference .............................................................................................. 92
Appendix B – Fax Printer Driver
Configure/Personalize Fax Printer Driver ................................................................. 94
Use Fax Printer Driver ............................................................................................... 97
SES Fax Client Screen ............................................................................................... 99
Schedule Fax for Future Delivery ............................................................................101
Stratagy ES User Guide 04/05 iii
Contents
Appendix C –Automatic Speech Recognition
Appendix C – Automatic Speech Recognition
Reach Destination .....................................................................................................104
Access Your Mailbox ...............................................................................................104
Send a Message ........................................................................................................105
Appendix D – Unified Messaging (UM) with Outlook Integration
Stratagy ES Message Window .................................................................................108
Address Book Feature ..............................................................................................110
Update Stratagy ES Address Book Manually ....................................................110
Update Stratagy ES Address Book Automatically ............................................110
Using UM Feature ....................................................................................................111
Voice Mail Options ..................................................................................................114
Play Voice Message ...........................................................................................114
Reply to Voice Message ....................................................................................115
Forward Voice Message ....................................................................................116
Send Voice Message ..........................................................................................117
View Fax ..................................................................................................................117
Appendix E – Unified Messaging with IP Integration
Configure Windows for Stratagy ES Codec .............................................................120
Check Codec is Installed on PC .........................................................................120
Configure Windows ..........................................................................................121
Record Stratagy ES Voice Messages (using Windows Sound Recorder) ................122
Send .WAV File as Voice Message .........................................................................123
Appendix F – Remote User Password Administration for TTS
Set Remote User Password .......................................................................................126
Glossary.......................................................................................................................127
Index ..............................................................................................................................131
iv Stratagy ES User Guide 04/05

Introduction

This guide describes the voice messaging capabilities and procedures for making the Stratagy ES and Stratagy iES32 Voice Processing System work for you.

Organization

This guide is divided as follows:
Chapter 1 – The Grand Tour is an overview of the Stratagy ES system. Topics
covered are: features to personalize your mailbox; an explanation of message folders, greetings, types and destinations; special delivery options; and available user options and prompts.
Chapter 2 – Getting Started provides instructions on those features you need
when accessing Stratagy ES for the first time, including changing your security code and recording your name.
Chapter 3 – Play Messages contains step-by-step instructions on playing
messages.
Chapter 4 – Send Messages details how to send, forward, and reply to a message.
Chapter 5 – Manage Mailbox provides step-by-step instructions on recording
greetings, using destination (distribution) lists, and activating options such as Do Not Disturb and Call Screening.
Appendix A – Using Stratagy ES with a Strata CIX/CTX outlines Call Forward,
Message Waiting, CTX Proprietary Integration (i.e., Soft Key Control of Voice Mail and Call Record features), and the Direct Transfer to Voice Mail and Voice Mail Conferencing features.
Appendix B – Fax Printer Driver provides step-by-step instructions on
configuring and using the fax printer driver.
Stratagy ES User Guide 04/05 v
Introduction

Conventions

Appendix C – Automatic Speech Recognition contains step-by-step instructions
on using the optional speech recognition feature.
Appendix D – Unified Messaging with Outlook Integration contains step-by-
step instructions on using the optional Unified Messaging feature.
Appendix E – Unified Messaging with IP Integration contains instructions on
recording and sending a .wav file using Windows® Sound Recorder.
Appendix F – Remote User Password Administration for TTS provides
instructions on how to update the Stratagy ES software with your e-mail log on password so that the system can read your e-mail messages via Text-to-Speech (TTS).
Glossary defines frequently-used Stratagy ES voice processing system features and
functions.
Index
Conventions
Conventions Description
Elaborates specific items or references other information. Within
Note
some tables, general notes apply to the entire table and numbered notes apply to specific items.
Important!
Extension Number Press to answer a call to the Extension Number. Each station can have
$ULDOEROG
Calls attention to important instructions or information.
multiple extension buttons. Incoming calls ring the extension button(s) from the top down. For example, station 10’s extensions ring 10-1 first, then 10-2, 10-3, and 10-4. A station is considered busy when all extensions are being used.
Note The naming convention for DKT assignments within Toshiba is
Directory Numbers. For clarity and ease of understanding, the terms Extension Number and Phantom Extension Number will be used in this document in lieu of PDN and PhDN.
Represents telephone buttons.
vi Stratagy ES User Guide 04/05
Conventions Description
Courier Shows a computer keyboard entry or screen display.
“Type” Indicates entry of a string of text.
Introduction
Conventions
“Press”
Indicates entry of a single key. For example: Type prog then press Enter.
Shows a multiple PC keyboard or phone button entry. Entries
Plus (+)
without spaces between them show a simultaneous entry. Example: Esc+Enter. Entries with spaces between them show a sequential entry. Example:
# + 5.
Tilde (~) Means “through.” Example: 350~640 Hz frequency range.
³
³
Denotes the step in a one-step procedure.
Denotes a procedure.
Grey words within the printed text denote cross-references. In the
See Figure 10
electronic version of this document (Library CD-ROM), cross­references appear in blue hypertext.

Action/Response Table

Actions you perform appear in this column. They can consist of either a single step or a series of numbered steps.
The immediate response to the action performed appears in this column. Additional notes and comments are also included.
Stratagy ES User Guide 04/05 vii
Introduction

Related Documents/Media

Related Documents/Media
Note Some documents listed here may appear in different versions on the CD-ROM
or in print. To find the most current version, check the version/date in the Publication Information on the back of the document’s title page.
Important! Read this User Guide first, then use it with the Quick Reference Guide.
Stratagy General Description
Stratagy Enterprise Server (ES) Installation & Maintenance Manual
Stratagy Enterprise Server System Administrator Guide
Stratagy Enterprise Server Quick Reference Guide
Stratagy Library CD-ROM

Stratagy eBrochure and Advisor CD-ROM

Packaged with every Stratagy shipped is a CD-ROM containing Stratagy eBrochure, and an end-user tutorial, Stratagy Advisor. Additional copies of this CD-ROM can be purchased from your Dealer Sales Representative.
eBrochure
The eBrochure provides a description of each of the Stratagy products along with audio supplemented mini-demonstrations illustrating the capabilities of Stratagy voice processing. Also included on the CD-ROM is an electronic copy of this
General Description
Advisor
The Stratagy Advisor is an end-user tutorial that can be used as a learning tool for the new user or as a refresher course for existing Stratagy users.
The Stratagy Advisor program covers general topics—such as play messages, send messages, etc.—that are applicable to all models of Stratagy systems. The Stratagy iES32 and Stratagy ES tutorials are separated into two sections: the Telephone User Interface (TUI) and Unified Messaging. All presentations interact with the viewer in order to provide a better understanding of how Stratagy works.
.
Stratagy
viii Stratagy ES User Guide 04/05

The Grand Tour 1

This chapter provides an overview of the system and covers the following general topics:
Features to personalize your mailbox
Message folders
Message types
Greetings
Special delivery options
Message destinations
User options
User prompts
User Tutorial (New User)
Stratagy ES User Guide 04/05 1
The Grand Tour

Overview

Overview
Stratagy ES manages multiple voice processing functions simultaneously 24-hours-a­day, seven-days-a-week. Your mailbox is always available for callers to leave private voice or fax (optional feature) messages. In addition, you can update your greeting at your convenience or send and receive messages from any touchtone telephone.
Callers control their own progress through the system. They no longer have to wait for a person to answer the telephone. If your extension is busy or you do not answer, callers can transfer to an operator, call another extension, or record a private, detailed message.
A representative in your company is assigned as the System Administrator for the system. The System Administrator is responsible for system maintenance that includes configuring your mailbox to suit your needs.
The configuration affects how and which features you can access. Whenever possible, this guide provides information concerning feature exceptions and which features may be configured to work differently.
You can access your mailbox from any tone-dialing telephone using your security code. After you access Stratagy ES, you hear the number of messages you have in your message folder(s), followed by a prompt from the Main Menu options (see Figure 1). You can then:
Listen to your messages
Send or forward messages
Reply to messages
Manage your mailbox (e.g., change your greetings, create distribution lists, etc.)
Listen to your e-mail messages
Note This feature is only available to users of Stratagy ES with Unified Messaging
(UM) and Text-to-Speech (TTS) capabilities. Check with your System Administrator to find out if your system is configured for this feature.
2 Stratagy ES User Guide 04/05
The Grand Tour
Overview
ENU
M
AIN
M
P
U
ANG
H
User Mode
Exit
††
ESSAGES
M
-MAIL
Retrieve and Listen to
E
Listen to e-mail message
Replay the current e-mail message
Save the current e-mail message
AILBOX
M
ANAGE
M
Change Greeting
Select ~ for a Personal Greeting
or for the System Greeting
ESSAGES
M
END
S
Enter one of the following:
Directory plus name
Mailbox number plus
Delete the current e-mail message
Forward the current e-mail message
Reply to the current e-mail message
Return to Main Menu
(number of e-mail messages to be
deleted plays)
Delete e-mail messages
Cancel deletion of e-mail
messages
Change Do Not Disturb (On/Off)
Change Call Screening (On/Off)
Change Security Code
Select Busy Greeting (toggle)
Record Busy Greeting
Record your Name
Change User Options
Personal Distribution List (1~25)
Multiple Destinations
Record
Change message Notification
Send and Return to Main Menu
Review recording
Record a message, comment or reply
(Press when finished.)
5464
Set Automatic Message Copy
Review Option Settings
Return to previous menu
Manage Person al Distribution Lists
Re-record
Append recording
Select Additional Destinations
Mailbox number plus
Manage Guest Mailboxes
Directory
Manage Personal Message Folders
Personal Distribution List
(1~25)
Review folder name/comment
Record folder name/comment
Return to previous menu
Select ~ for a Personal Message
Folder
Set Urgent status (On/Off)
Set Private status (On/Off)
Set Return Receipt request
Special Delivery Options
Press when finished.
Return to a Main Menu
(On/Off)
Return to previous menu
Cancel and Return to Main Menu
Set Future Delivery
Cancel message and select new
destination
ESSAGES
M
LAY
P
Standard Save Message Folder
Play the next message
~ Personal Message Folder(s)
Replay the current message
Save the current message
Play the Previous message
Delete the current message
Forward the current message
Reply to the current message
Special Functions
Return to Main Menu
(number of messages to be deleted
plays)
Immediate Fax print of current fax
document†Send All Fax documents to fax
documents within a folder
machine for print within a folder†Send Current Fax to fax machine for
Immediate Fax print of all fax
print†Message Date and Time
Future Delivery Review
(Play, Save, Delete)
Continuous Delete
Access New/Saved message folders
(toggle)
Continuous Play
Return to previous menu
Optional feature
Requires UM and TTS
††
Figure 1 Stratagy ES Main Menu
Stratagy ES User Guide 04/05 3
The Grand Tour

Features to Personalize Your Mailbox

Features to Personalize Your Mailbox
The Stratagy ES Voice Processing System offers a variety of features to personalize your mailbox. The following are a few of those features:
Mailbox Security Code – Your mailbox has a security code. The code must be
entered by you in order to “log into” your mailbox, giving you access to your messages, settings, greetings, etc. (see “Change Your Security Code”
Name Recording – Your name is announced whenever the directory is accessed,
you select the system greeting, or a message is sent by another Stratagy ES user. When you first enter your mailbox, you need to record your name (see “Record
You r N am e”
Personal Greetings – You can record up to seven personal greetings that are played
when you are unavailable (see “Change Greeting”
Guest Users – You can create guest mailboxes that can be used by clients, friends,
etc. Users frequently use this feature to create guest mailboxes for clients, so that they can easily exchange confidential information (see
on page 76
Personal Folders – You can save your messages in up to seven personal folders you
create. The folders are for only your use and you can change them whenever necessary (see “Manage Personal Folders”
on page 20).
on page 54).
“Manage Guest Mailboxes”
).
on page 78).
on page 22).

Message Folders

Messages in the Stratagy ES are stored in message folders and play in the order received – FIFO (First In, First Out) or LIFO (Last In, First Out).
Your mailbox has one of the following folder configurations:
A single message folder where all messages reside.
Dual message folders – new, saved.
Multiple message folders where, in addition to the new and saved folders, you can
create up to seven personal folders for your messages.
Note Consult your System Administrator for your mailbox’s programming.
4 Stratagy ES User Guide 04/05
The Grand Tour
Message Folders

Single Message Folder

Your messages reside in one message folder. When you access your mailbox, Stratagy ES announces you have “x messages, y is (are) new, z is (are) urgent, w fax(es).” New messages play based on the type (urgent messages play first) and order received (FIFO/LIFO). If no new messages exist, Stratagy ES plays any saved messages in the mailbox.
After you play the last message in the folder, Stratagy ES prompts, “End of messages.” You can choose to return to the top of the folder, etc.

Dual Message Folders

Your messages reside in one of two folders—new or saved. When you access your mailbox, Stratagy ES announces you have “x new, y is (are) urgent and z saved messages, w fax(es).”
New Message Folder
New messages consist of messages that are unheard.
When you press accesses the New Message Folder. A new message begins to play based on the type (urgent messages play first) and order received (FIFO/LIFO). After you play the last message in the folder, Stratagy ES prompts, “End of messages.” You can choose to return to the top of the folder, or go to the top of the saved folder.
Your Message Waiting LED only extinguishes when all new messages have been either deleted or saved.
Note You can enable a Message Pending feature on your mailbox. When enabled,
the system marks new messages that have been partially heard (for more than two seconds by default) as Pending. Pending messages remain in the New Message Folder; however, if the New Message Folder contains only Pending Messages, your Message Waiting LED goes out. This allows you to retain messages in the New Message Folder, yet alert you when new messages arrive. Messages marked as Pending also submit a Return Receipt notification to the sender of the message, if it was requested. Consult your System Administrator for further information.
Stratagy ES User Guide 04/05 5
from the Main Menu to play messages, Stratagy ES automatically
The Grand Tour
Message Folders
If no new messages exist, Stratagy ES automatically accesses the Saved Message Folder. If you are in the Saved Message Folder, you can toggle back to the New Message Folder by pressing
Saved Message Folder
Saved messages consist of messages that:
You save by pressing either during or after playing the message. Stratagy
prompts, “This message will be saved in the Saved Message Folder.”
Stratagy ES automatically saves when you do not press (delete) after playing the
message.
Messages are not moved to the Saved Message Folder until you log out of your mailbox, enabling you to return to the new message folder and replay the message.
.
Access the Saved Message Folder from the Main Menu by pressing New Message Folder by pressing
. Stratagy ES automatically accesses the Saved
or from the
Message Folder when no new messages exist.
After you play the last message in the folder, Stratagy ES prompts, “End of messages.” You can choose to return to the top of the folder, or go to the top of the new message folder by pressing
.

Multiple Message Folders

Your messages reside in up to nine folders— one new (folder 0), one saved (folder 1) and up to seven personal folders (folders 2~8), created by you for the purpose of saving your messages. The personal folders are for only your use. When you access your mailbox, Stratagy ES announces the number of messages you have in the same manner as the example in “Dual Message Folders”
Message folders enable you to store saved messages topically, providing better organization of important correspondence. You can record a comment for each folder, such as “Messages from Toshiba America,” to assist you in locating the right folder in which to store or retrieve a message.
Note To create or change personal folders, see “Manage Personal Folders” on page
78
.
on page 5.
6 Stratagy ES User Guide 04/05
The Grand Tour
Message Folders
New Message Folder
The New Message Folder is configured identically for both the Dual Message and Multiple Message Folder mailboxes with the following exception:
If no new messages exist in a Multiple Message Folder mailbox, Stratagy ES accesses the Saved Message Folder (if you have not created any personal folders) or plays the name/comment/number of all available personal folders. You are then requested to enter the folder number.
Saved Message Folder/Personal Message Folders
Saved messages consist of messages that:
Stratagy ES automatically saves when you do not press (delete) after playing the
entire message. The message is saved in the Saved Message Folder (folder 1), the default destination for saved messages. Stratagy ES prompts, “This message will be saved.”
You save by pressing either during or after playing the message. Stratagy ES
checks your mailbox for Personal Message Folders.
If personal folders do not exist, Stratagy ES saves the message in the Saved Message Folder (folder 1). Stratagy prompts, “This message will be saved.”
If Personal Message Folders
do exist, Stratagy ES plays the recorded name/
comment and number of all available personal folders. You are requested to enter a valid folder number where you want the message saved. If you know the personal folder number you want, you can select it at anytime. You do not have to listen to the entire list of available folders. If an invalid number is entered, Stratagy ES automatically saves the message in folder 1.
Messages are not moved to a “save” folder until you log out of your mailbox, enabling you to return to the new message folder and replay the message.
After you play the last message in the folder, Stratagy ES prompts, “End of messages.” You can choose to return to the top of the folder, go to the top of another folder, etc.
Stratagy ES User Guide 04/05 7
The Grand Tour

Message Types

Access Folders
When you press  from the New or Saved Message Folders or  from the Main Menu, Stratagy ES checks your mailbox for personal folders. Depending upon whether it finds any, Stratagy ES performs the following procedures:
Access Method No Personal Folders Personal Folders
From New or Saved Message Folder, press .
From Main Menu, press .
Message Types
The Stratagy ES has the following special types of messages—forwarded, reply, fax, and e-mail.

Forwarded Message

Any message sent to you can be forwarded to one or more individual destinations or a personal or system distribution list. When forwarding a message, recording a message (comment) is optional.

Reply Message

Messages from other Stratagy ES users to which you want to send an immediate response can be sent as a reply message. When replying to a message, Stratagy ES does not prompt you to select the destination if the original message was recorded within a user’s mailbox. If the message was not recorded from a user’s mailbox, you can still reply to the message but the system requests that you enter a destination mailbox number.
Goes to Saved Message Folder.
Stratagy ES prompts you to:
x
Enter a personal folder number.
or press...
x
for the New Message Folder.
x
for the Saved Message Folder.
When listening to a reply message, a prompt notifies the user of the name/mailbox number of the person who sent the reply.
8 Stratagy ES User Guide 04/05
The Grand Tour
Message Types

Fax Message

Note Fax Messaging is an optional feature in the Stratagy ES. Check with your
System Administrator to find out if your system is configured for this feature.
Fax messages can be sent to your mailbox and stored or forwarded along with voice messages. When you access your mailbox, Stratagy ES tells you the number of fax messages that are in your mailbox. Once you access the fax message, Stratagy ES plays the header information that includes the number of pages received. You cannot listen to the actual fax document.
You can forward the fax to other users as you would a voice message, including sending a voice comment with the fax to provide information about the message. You can also print the fax. See “Special Functions” on page 29 for details.

E-mail Message

Note This feature is only available to users of Stratagy ES with Unified Messaging
(UM) and Text-to-Speech (TTS) capabilities. Check with your System Administrator to find out if your system is configured for this feature.
You can retrieve and listen to your e-mail messages from your mailbox. Once you access the e-mail message, Stratagy ES plays the header information that includes sender information and time and then plays the content. Upon playing the e-mail message you can:
Delete it from your e-mail Inbox on your computer. E-mails that are not deleted
remain in your e-mail Inbox and are played the next time you access this function.
Forward it to other users that have UM privileges. The destination user must have
both a Stratagy ES voice mailbox and an e-mail address that has been defined in the destination user’s mailbox.
Reply to a e-mail message. The Stratagy ES generates an e-mail message with your
recorded reply attached as an audio .wav file, and sent back to the originator.
Stratagy ES User Guide 04/05 9
The Grand Tour

Greetings

Greetings
You can select either a personal or system greeting to play to callers when you do not answer or when your telephone is busy.
Depending on how your system is configured, callers may hear a separate busy greeting—the system or the custom busy greeting. See “Change User Options” on page
59 for details.

Personal

Personal greetings are greetings that you record for callers. Stratagy ES stores all recorded greetings under the personal greeting number (1~7) for your mailbox. Using the greeting number, you can select which greeting plays.
The System Administrator can also schedule your greetings to automatically play at different times. If you choose, you can override the automatic schedule using “Select a
Personal Greeting”

System

The system greeting is a standard prerecorded greeting with all Stratagy ES systems. It cannot be recorded over or deleted. The greeting states, “Please leave a message for (name).” Stratagy ES adds your name from the name recording that you made (see
“Record Your Name”
on page 57.
on page 20).

Busy

If your mailbox is configured for a personal busy greeting, you can record a custom busy greeting that plays when your extension is busy. If a custom greeting is not recorded, the default system busy greeting plays.The custom busy greeting can also be turned On/Off using the Select Your Busy Greeting option on the Change User Options Menu (see “Select Busy Greeting”
Note The System Administrator must configure your mailbox for the custom busy
greeting option to be available.
10 Stratagy ES User Guide 04/05
on page 63).

Special Delivery Options

In addition to recording and sending a new message, you can mark the message urgent, private, or request a return receipt.

Urgent

Messages can be marked urgent by the sender and always play first in the New Message Folder. After the message plays, the urgent status is removed.

Private

Messages can be marked private by the sender. The same options, such as saving and deleting, apply to the private messages; however, a private message cannot be forwarded or copied using the Automatic Message Copy feature. Once a message is sent, the private status cannot be removed.

Return Receipt

You can mark a message for Return Receipt if you want verification that it has been played. When a user completely plays a message marked for Return Receipt, a notification is sent back to the sender. Stratagy ES notifies the sender the time the message was heard and by whom and then plays the original message as a reminder of the message. This can be helpful if multiple messages were sent to the same destination with Return Receipt requested.
The Grand Tour
Special Delivery Options

Future Delivery

Stratagy ES can be configured so that your message is delivered at a future specified time and date. After marking the message for future delivery, you can review (play, save, delete) the message at any time before it is sent (see Future Delivery Review”
on page 30).
Stratagy ES User Guide 04/05 11
The Grand Tour

Message Destination Selections

Message Destination Selections
At the beginning of the Send Messages menu, you are asked to enter the destination mailbox number(s).You can choose to enter a single destination (e.g., mailbox number) or multiple destinations (e.g., mailbox number, personal lists). Using the Multiple Destinations option enables you to address your message to all the recipients at the start of the menu.
You can then record your message and, if desired, add additional destinations when prompted later in the menu. Valid destinations are:
Mailbox Number
Note If you don’t know the user’s mailbox number, you can locate the mailbox
number on Stratagy ES’s system-wide directory by pressing
Personal distribution list
System distribution list
Audio Messaging Interchange Specification (AMIS) Proxy mailbox number
AMIS Gateway number plus a remote mailbox number
Note AMIS analog networking is an optional feature and enables a Stratagy
mailbox user to send, receive and reply to relayed voice messages over any remote voice mail system that supports the AMIS analog protocol.
.
See “Send a Message”
on page 39 for instructions on using these options.

Personal Distribution Lists

You can create up to 25 Personal Distribution Lists consisting of other system users. You can add or delete users at any time. The lists are for only your use.
At the time you create a list, you are given the option of recording a “list comment” that serves as the title or name for the list. The comment plays each time you use the list to confirm that you have chosen the correct distribution list.
12 Stratagy ES User Guide 04/05
The Grand Tour
Message Destination Selections

System Distribution Lists

In addition to Personal Distribution Lists, Stratagy ES supports system-wide distribution lists created by the System Administrator for use by everyone in your company. You should check with your System Administrator to find out which lists are available.
The “list comment” for the selected system list is played whenever you enter the mailbox number to confirm that the right list has been chosen.
Important! When creating lists, you should keep in mind that Stratagy ES does not
check for duplicate users on separate lists when sending a message. For example, if you select Personal Distribution List #1 and #3 as destinations for your message and Mailbox Number 1001 is on both lists, the message is sent twice to Mailbox Number 1001.

Directory

Using your telephone’s dial pad, you can enter the digits corresponding to the first few letters of a user’s name or the first letters of a system distribution list name. Stratagy ES plays the recorded name and mailbox number that matches the combination of entered digits. You can then select the name or go on to the next name in the directory.
Each mailbox can be identified with up to two names. These names are entered into the automated directory by the System Administrator and enhance the directory’s search/ find capabilities. Common choices for the names are the first and last names of the user, last name of the user and a commonly misspelled version of the last name or in the case of a system distribution list, two words that might appear in the list title.
Stratagy ES User Guide 04/05 13
The Grand Tour

User Options

User Options
You can set your mailbox for Do Not Disturb (DND) or call screening, select or record a busy greeting (plays when your telephone is busy), designate where or how you are notified of a message, and set your mailbox to automatically copy messages to another mailbox.
The following is a brief description of each of the options. Please see “Change User
Options”
Important! The System Administrator must activate these features for them to be
DND – When a caller enters your extension number, the Stratagy ES automatically
Call Screening – Stratagy ES asks callers for their name. Without the caller’s
Busy Greeting – You can record your own custom busy greeting that plays when
Message Notification – Your mailbox can have notification records programmed
on page 59 for more detailed information.
sends the call to your mailbox without first ringing your telephone.
knowledge, the system relays that information to you. You can decide to receive the call, let the call forward to your mailbox, or transfer the call to another extension with or without an announcement.
callers reach your extension, and it is busy.
by the System Administrator with a specific notification method (message waiting lights, pagers, voice, etc.) and the time/day when that notification record applies.
Once you have turned on a specific notification record, Stratagy ES automatically calls you at the designated number and with the chosen method to notify you of your messages.
available.
Automatic Message Copy – You can set your mailbox to automatically copy all
messages or just urgent messages to another mailbox during specified times of the day.
14 Stratagy ES User Guide 04/05

User Prompts

The Stratagy ES system prompts only for menu options available to you. You do not hear prompts for options:
Not available in your Stratagy ES system (i.e., fax).
Not configured for your mailbox by the System Administrator (e.g., guest users,
DND).
Check with your System Administrator to verify which user options and features are available to you.
The Grand Tour
User Prompts
Stratagy ES User Guide 04/05 15
The Grand Tour
User Prompts
16 Stratagy ES User Guide 04/05

Getting Started 2

This chapter instructs you on accessing and exiting your mailbox and outlines the user tutorial steps.

User Tutorial

When you log on to the Stratagy ES Voice Processing system for the very first time, you hear a tutorial that walks you through the following basic steps:
Record your name. Your name is announced whenever the directory is accessed,
you select the system greeting, or another Stratagy ES user sends a message to you.
Record your personal greeting. Your personal greeting automatically plays when
you are not available to answer your telephone.
Change the default security code for your mailbox to ensure privacy. You should
change it on a regular basis.
Note If you do not complete the tutorial before hanging up, Stratagy ES saves any
completed portion (e.g., your name recording) and restarts where you left off the next time you log on to your mailbox. Once the Stratagy ES tutorial is completed successfully, it cannot be replayed.
Stratagy ES User Guide 04/05 17
Getting Started
Step 1: Access Your Mailbox
Step 1: Access Your Mailbox
The Main Menu (shown below) is your starting point for all of Stratagy ES’s messaging features. Pressing
To access your mailbox, you need to know:
The telephone number to access Stratagy ES
Your mailbox number
Your default security code
Please ask your System Administrator if you do not have this information.
 from most menus returns you to the Main Menu.
MAIN MENU
MAIN MENU
Play Messages
Play Messages
Send
Send
Messages
Messages
Manage Mailbox
Manage Mailbox
Listen to E-mail
Listen to E-mail Messages Messages
user mode
Exit
user mode
Exit Hang Up
Each time you access your mailbox, Stratagy ES announces:
The number of new and saved messages you have in your message folder(s).
The number of messages that will be purged upon exiting your mailbox, if
applicable.
Stratagy ES then plays the Main Menu options.
18 Stratagy ES User Guide 04/05
Getting Started
Step 1: Access Your Mailbox
If you receive new messages while you are logged on to your mailbox, Stratagy ES informs you that new messages have arrived every time you return to the Main Menu.
1. From an internal telephone, call Stratagy ES on
The system answers with your standard company greeting.
___________
...or from an external telephone, call Stratagy ES on ___________.
2. When Stratagy ES answers, press
.
3. Enter your mailbox number.
4. Enter the default security code.
If you make a mistake while entering the code, press
Note If the Stratagy ES is fully integrated with the telephone system, Stratagy ES is
to re-enter.
Stratagy ES prompts you to enter your mailbox number.
Stratagy ES prompts you to enter your security code.
You are now in your mailbox. Stratagy ES plays the number of messages you have and then prompts you with a list of choices from the Main Menu.
informed of your mailbox number and prompts you for your security code. Consult your System Administrator for information on how your system is integrated.
Stratagy ES User Guide 04/05 19
Getting Started
Step 2: Record Your Name
Step 2: Record Your Name
Your name is announced whenever the directory is accessed, you select the system greeting, or a message is sent by you to another Stratagy ES user.
When you first enter your mailbox, the Stratagy ES tutorial prompts you to record your name and walks you through the entire recording sequence. You can re-record your name at any time (see “Record Your Name”
1. At the tone, state your name slowly and clearly (if you like, you can also state your extension).
2. Press when done. Stratagy ES plays your name recording.
3. After your name plays, press:
To accept the recording Your recording becomes part of your mailbox
Re-record Stratagy ES returns you to the record your name
on page 66).
and Stratagy ES prompts you to record your personal greeting.
prompt.
20 Stratagy ES User Guide 04/05
Step 3: Record Your Personal Greeting
The tutorial now prompts you to record your personal greeting. This greeting becomes your Personal Greeting #1. You can record up to six other greetings (see “Create or
Record Over a Personal Greeting”
Personal greetings should be informative and advise callers when you will be available to return their calls or respond to their messages. You can update personal greetings as often as you want.
Sample Greeting
“Hi. This is Mary Smith of the Toshiba Marketing Department. It is Monday, June 19, and I am in the office today. I am either on the telephone or have stepped away for a few minutes and your call has been forwarded to my voice mailbox. If at the tone you leave a detailed message and a telephone number where I can reach you, I will be happy to return your call.”
on page 55 for instructions).
Getting Started
Step 3: Record Your Personal Greeting
1. At the tone, begin recording your greeting.
2. Press
when done. Stratagy ES plays your greeting.
The following information should be included:
x
Your name
x
Company and/or department
x
Date
x
Your availability
x
Instructions to leave a detailed message
x
Call coverage options
3. After your greeting plays, press:
To accept the recording Your greeting becomes Personal Greeting #1
and Stratagy ES prompts you to change your security code.
Re-record Stratagy ES returns you to the record your
greeting prompt.
Stratagy ES User Guide 04/05 21
Getting Started
Step 4: Change Your Security Code
Step 4: Change Your Security Code
You should change your security code on a regular basis to ensure the privacy of your messages and personal greetings (see “Change Security Code”
Stratagy ES prompts you to enter your new security code and notifies you of the number of allowable digits. For example, Stratagy ES might prompt “the new security code must have at least three digits and 16 maximum digits” or “the new security code must be exactly four digits.”
on page 62).
1. Enter your new security code +
.
2. Re-enter your new security code +
.
Stratagy ES prompts you to re-enter your new security code for verification.
After entering the security code a second time, Stratagy ES announces that your security code has been changed.
You have completed the tutorial. Stratagy ES announces “mailbox number xxx is enabled,” and announces the number of messages in your mailbox. You can now perform any of the functions available on the Stratagy ES Main Menu or exit the mailbox.
Step 5: Exit Your Mailbox or User Mode
³ To exit your mailbox, press
to hang up
...or to exit the user mode, press
.
Stratagy prompts, “Thank you for calling. Good-bye.”
Stratagy ES can be configured so that you can exit your mailbox without leaving the Stratagy ES system. Please ask your System Administrator to find out if your system is configured for this or some other function when pressing
.
If you have the “0 to EXIT User Mode” capability, you hear Stratagy ES’s instructional greeting. You can now access another user or a different mailbox.
22 Stratagy ES User Guide 04/05

Play Messages 3

This chapter explains how to use the Play Messages feature. It covers:
Accessing messages
Playback controls
Playing messages
Special functions
Retrieve and listen to e-mail messages
Stratagy ES lights the message waiting light on your telephone when a voice or fax message has been left for you on the Stratagy ES system.
Note Your telephone system and telephone must support a message waiting light
for this feature to function.
If configured, Stratagy ES automatically turns off your message waiting light on your telephone when your new message folder is empty or only Pending messages remain (see “Message Folders”
on page 4).
All new messages must be deleted, saved, or pending (partially heard) for Stratagy ES to turn off the message waiting light on your telephone. The Message Waiting LED remains on only if there are new messages in the folder.
Stratagy ES User Guide 04/05 23
Play Messages

Access Messages

Access Messages
Once you press to play your messages, the following telephone keys assist you in going through your messages:
Takes you to the next message or back to the top of the folder when you have
reached the last message in the folder.
Replays the current message.
Takes you to the previous message or back to the last message in the folder when
you have reached the top of the message folder.
If you receive new messages while you are accessing your mailbox, Stratagy ES notifies you every time you return to the Main Menu that new messages have arrived.
Note See “Message Folders” on page 4 on using access keys  and .

Playback Controls

While playing a message, you can pause, control the volume, location, and speed of playback using the following keys (shown below).
Press to play Previous Message (from first message go to last)
Play Next Message (from last message go to first)
Pause/Resume
(toggle or 30 secs.)
Back Up (rewind)
3095
Turn Down volume
Turn Up volume
Go Forward (advance)
Press twice to
Change Speed (toggle)
24 Stratagy ES User Guide 04/05
Play Next Message
Plays next message in folder. If you are at the last message in the folder, goes to the first message in the same folder.
 Replay Current Message
Plays previous message in folder. If you are at the first message in the folder, goes to the last message in the same folder.
 Play Previous Message
Plays previous message in folder. If you are at the first message in the folder, goes to the last message in the same folder.
Pause/Resume (toggle or 30 seconds)
At any time while playing messages, you can press to pause the playback. The message resumes playing as soon as you press amount of time (default is 30 seconds). You can pause the playback as many times as necessary.
or automatically at the end of a defined
Turn Up Volume,  Turn Down Volume
Play Messages
Playback Controls
Each time you pressor, the volume of messages adjusts one increment until the maximum number of increments is reached. Stratagy ES saves the current level when you exit.
Back Up (rewind)
The message backs up/rewinds and then begins playing. The default is five seconds (set by the System Administrator).
Go Forward (advance)
The message goes forward/advances and then begins playing. The default is five seconds (set by the System Administrator).
 Change Speed (toggle)
Two speeds are available for playing messages: normal and fast (level set for your mailbox by the System Administrator). When you exit the Play Messages Menu, the system returns to the default speed.
Stratagy ES User Guide 04/05 25

Play Messages

Play Messages
Play Messages
When you access your mailbox, Stratagy ES tells you the number of urgent, new, saved, and fax messages (if supported by your system; check with your System Administrator) you have in your mailbox.
When you press
from the Main Menu to play messages (menu shown below),
Stratagy ES automatically accesses the New Message Folder. If no messages exist in the New Message Folder, Stratagy ES automatically accesses the Saved Message Folder or Personal Folders.
If your mailbox is empty, the Stratagy ES Main menu prompt does not include “press
to play messages.”
From the Main Menu:
Play Messages
Play the next message
Replay the current message
Save the current mesage
Play the Previous message
Optional feature
Delete the current message
Forward the current message
Reply to the current message
Special Functions
Immediate Fax print of all fax documents
within a folder
Immediate Fax print of current fax document
Send All Fax documents to fax machine
for print within a folder
Send Current Fax to fax machine for print
Message Date and Time
Future Delivery Review (Play, Save, Delete)
Continuous Delete
New/Saved message folder (toggle)
Continuous Play
Return to previous menu
Return to the Main Menu
While playing a message, you can press:
Pause/Resume (toggle or 30 seconds)
Turn Up volume
Turn Down volume
Backup (rewind)
Go Forward (advance)
Change Speed (toggle)
(Change speed is not supported in Release 5.)
4554
26 Stratagy ES User Guide 04/05
Play Messages
Play Messages
1. From the Main Menu, press
.
A message plays.
While the message plays, you can select resume, volume, volume,
(rewind), (advance), and/or
to pause/
to turn up
to turn down
to back up
to go forward
 to
change speed (toggle).
2. (Optional) While the message plays or immediately after, you can select
one of the following:
Play the next message Skips to the beginning of the next message.
Note If you reach the end of your messages,
pressing
takes you back to the top of
the same folder.
Save the current
message
Single or dual message folders: Stratagy ES saves the message and the Play Messages Menu plays.
(Optional) For Multiple Folder mailboxes: Enter a folder number (
for Saved Message
Folder,
~ for Personal
Folders).
Multiple message folders: Stratagy ES plays the recorded names/comment/numbers of all available folders. You are requested to enter a valid folder number where you want the message saved.
If an invalid number is entered, Stratagy ES automatically saves the message in folder
Note To create or change
personal folders, see
“Manage Personal Folders”
on page 78.
.
Stratagy ES User Guide 04/05 27
Play Messages
Play Messages
Note Messages are not moved to the saved
folder until you log out of your mailbox, enabling you to return to the new message folder and replay the message.
The Play Messages Menu plays.
Delete the current
message
Flags the current message for deletion. The Play Messages Menu plays. When you exit Play Messages, Stratagy ES tells you the number of messages to be deleted. If you do not want to delete a message, save the message before exiting your mailbox.
Note Stratagy ES can be programmed to
purge messages after a preset length of time. Consult your System Administrator. Stratagy ES notifies you before purging messages.
Forward the current
message
With the exception of private messages, all messages can be forwarded to a single user, multiple users, or a destination list. See
“Forward a Message”
on page 43 for details on
this feature.
Reply to the current
message
Your reply is sent to the originator of the message. In addition, you can send your reply to a single user, multiple users, or a destination list. See “Reply to Current Message”
on page 46 for
details on this feature.
Special Functions Stratagy ES prompts with the options. See
“Special Functions” on page 29 for instructions
on using this option.
Replay the current
The current message plays from the beginning.
message
28 Stratagy ES User Guide 04/05
Play Messages

Special Functions

Play the previous
message
Return to Main Menu Stratagy ES tells you the total number of
Special Functions
You can print or send faxes, check the date and time a message was sent, or review a message set for future delivery in the Play Messages Menu.
When you play a message, this option is available by pressing
Note If a message does not contain a fax, Stratagy ES does not play Fax options.
³ Press an option number:
Immediate Fax print of
all fax documents within a folder
Immediate Fax print of
current fax document
Send all Fax documents
within a folder to a fax machine for print
Enter fax machine’s telephone number.
to accept entry The system sends all fax messages to a fax
Press
The previous message plays from the beginning.
Note If you are at the top of the message
folder, pressing bottom of the same folder.
takes you to the
messages that will be deleted when you log out of your mailbox, and then returns to the Main Menu.
Special Functions.
Retrieves (prints) all the faxes from your mailbox while calling from a fax machine (or other device capable of receiving a fax) with a handset.
Retrieves (prints) the current fax from your mailbox while calling from a fax machine (or other device capable of receiving a fax) with a handset.
Stratagy ES prompts for the fax machine’s telephone number.
machine (or other device capable of receiving a fax) for retrieval (print). The Play Messages Menu plays.
Stratagy ES User Guide 04/05 29
Play Messages
Special Functions
...or  to re-enter fax number.
Send Current Fax to fax
machine for print
Stratagy ES prompts for the fax machine’s telephone number.
Enter fax machine’s telephone number.
Press
to accept entry The system sends a fax message currently
residing in your mailbox to a fax machine (or other device capable of receiving a fax) for retrieval (print). The Play Messages Menu plays.
...or
to re-enter fax
number.
Message Date and Time The date and time the message was received
plays, followed by the entire message.
Note If your System Administrator
programmed an automatic date and time stamp for all messages, the stamp plays automatically at the beginning of each message.
Future Delivery Review Stratagy ES announces the total number of
future delivery messages and plays the first message (i.e., future delivery time/date, destination mailbox, and the entire message) based on chronological order. Stratagy ES automatically saves the message for future delivery.
30 Stratagy ES User Guide 04/05
While the message is playing or immediately after, you can press
to
play the next message,
to s
ave the current
message,
to delete the
current message and/or
to return to the Special
Functions Menu.
Continuous Delete Stratagy ES prompts for  or
Press
to delete all
messages
Deletes multiple messages at one time in your New, Saved or Personal Message Folder(s) without additional action from you.
Note See the Continuous Play feature on
page 32 before using Continuous
Delete.
The number of messages deleted is based on a preset length of time (designated in minutes) set by your System Administrator on a system-wide basis.
Play Messages
Special Functions
entry.
Important! The deletion starts with the first
message in the folder and continues until the preset time has expired. Both heard and unheard messages are deleted. If there are multiple folders, the deletion occurs only in the folder you are in when you press
for
continuous delete.
...or
to cancel option. Returns to Play Messages Menu.
Stratagy ES User Guide 04/05 31
Play Messages
Special Functions
New/Saved message
folder (toggle)
Stratagy ES checks the system for any personal folders you have created. If personal folders exist, Stratagy ES prompts for a personal folder
If personal folders exist, enter a folder number
to go to new
...or folder, Message Folder, or
to go to Saved
number. If none exist, this feature operates as a toggle and moves you back and forth between the New and Saved Message Folders.
to
return to previous menu.
Continuous Play Plays many messages at a time in your New,
Saved or Personal Message Folder(s) without additional action from you.
Note Messages played in the New Message
Folder remain as new messages and are not automatically saved.
The number of messages played is based on a preset length of recorded time (designated in minutes) and therefore varies. (Your System Administrator sets the length of time on a system-wide basis.) The messages played are those whose cumulative time is equal to, or less than, the designated number of minutes.
Important! The playback starts with the first
message in the folder and continues until the preset time has expired. If there are multiple folders, the playback occurs only in the folder you are in when you
for continuous playback.
press
Ask your System Administrator to verify that you have this option.
Return to previous
Stratagy ES returns to the Play Messages Menu.
menu
32 Stratagy ES User Guide 04/05
Play Messages

Retrieve and Listen to E-mail Messages

Retrieve and Listen to E-mail Messages
Note This feature is only available to users of Stratagy ES with Unified Messaging
(UM) and Text-to-Speech (TTS) capabilities. Check with your System Administrator to find out if your system is configured for this feature.
When you press
(menu shown below) from the Main Menu, Stratagy ES announces
how many new e-mail messages you have, and gives you the opportunity to have them read to you. By pressing
, Stratagy ES retrieves and begins reading your e-mail
messages using an automated voice.
The order in which they are read to you, is determined by your e-mail service. In most cases, this is in the order in which they were received.
From the Main Menu:
Retrieve and Listen to E-mail Messages
Listen to e-mail message
Replay the current e-mail message
Save the current e-mail mesage
Delete the current e-mail message
Forward the current e-mail message
Reply to the current e-mail message
Return to the Main Menu
Delete e-mail messages
Cancel deletion of e-mail messages
5453
1. From the Main Menu, press
.
The system accesses your e-mail account and prompts you with the number of new e-mail messages you have. The E-mail Message Menu plays.
2. Press
to play your e-mail
messages.
An e-mail message plays. The system tells you if a attachment(s) is present. Stratagy ES can only alert you of the presence of attachments, it cannot administer them in any way.
Stratagy ES User Guide 04/05 33
Play Messages
Retrieve and Listen to E-mail Messages
3. (Optional) While the message plays or immediately after, you can select one of the following:
Play the next e-mail
message
Save the current e-mail
message
Delete the current
e-mail message
Forward the current
e-mail message
Comments can be recorded for this message, which is attached as a standard .wav file to the original message.
Skips to the beginning of the next e-mail message.
Note If you reach the end of your e-mail
messages, pressing
takes you back to
the previous menu.
The e-mail message remains in your e-mail mailbox and the E-Mail Message Menu plays.
Marks the current e-mail message for deletion from your e-mail account. The Listen to E-mail Message Menu plays.
Important! If you only press and then hang
up, the message is not deleted. You must press
to exit this menu
in order for the deletion to be complete.
Stratagy ES requests address information. After the first destination has been entered, additional destinations can be entered by pressing
. The
destination user must have a Stratagy ES voice mailbox with an e-mail address designated within that mailbox.
If the destination mailbox does not support e-mail, the system informs you that this was an invalid entry. E-mail messages cannot be forwarded to Stratagy ES Personal or System Distribution Lists.
Note Check with your System Administrator
to see if your mailbox is set up for this feature.
34 Stratagy ES User Guide 04/05
Play Messages
Retrieve and Listen to E-mail Messages
Reply to the current
e-mail message
Stratagy ES creates an e-mail message with your reply attached as a standard .wav audio file and sent to the originator.
Replay the current
e-mail message
Return to Main Menu Stratagy ES tells you the total number of e-mail
The current e-mail message plays from the beginning.
messages that will be deleted when you leave this menu, and asks for confirmation.
Delete e-mail
messages that are marked for deletion
Cancels deletion of
e-mail messages
Stratagy ES deletes all the messages you marked for deletion and returns you to the Main Menu.
Stratagy ES saves the messages and the E-mail Message Menu plays.
marked for deletion
Stratagy ES User Guide 04/05 35
Play Messages
Retrieve and Listen to E-mail Messages
36 Stratagy ES User Guide 04/05

Send Messages 4

You can record and send a message from any touchtone telephone to another Stratagy ES user, several users, or to a personal or system distribution list.
This chapter covers:
Recording controls
Send a message
Forward a message
Reply to the current message
Special Delivery options
Future Delivery
Send a fax
Stratagy ES User Guide 04/05 37
Send Messages

Recording Controls

Recording Controls
While recording a message, you can pause/resume the recording or end the recording using the following keys (shown below).
Pause/Resume
(toggle or 30 secs.)
Pause/Resume (toggle or 30 seconds)
At any time while recording messages to another mailbox in the system, you can press
to pause the recording. The message resumes recording as soon as you press .
Stratagy ES prompts you with, “Begin recording... (Beep).”
End recording
3096
If within a defined amount of time (default is 30 seconds) you do not press
,
Stratagy ES restarts another 30-second pause. If during the second 30-second pause you:
Do not press any key, Stratagy ES assumes you have cancelled the message and
returns to the Main Menu.
Press , Stratagy ES returns you to the Send Messages Menu and you can send,
review or record over the message.
End Recording
After recording a message, press to end the recording.
38 Stratagy ES User Guide 04/05

Send a Message

Using the Send Messages Menu (shown below), you can record a message and send it to single mailbox or multiple destinations (e.g., personal or system distribution list), forward a message (with a comment), or reply to a message sent you.
From the Main Menu:
Play Messages
Forward the current message
Reply to the current message
Send Messages
Enter destination (one of the following):
Mailbox number plus
Directory plus name
Personal Distribution List (1~25)
Multiple Destinations
Record
Record a message, comment, or reply. (Press when finished.)
Send and Return to Main menu
Review recording
Re-record
Append recording
Select Additional Destinations
Special Delivery Options
Set Urgent status (On/Off)
Set Private status (On/Off)
Set Return Receipt request (On/Off)
Return to previous menu
Set Future Delivery
Cancel message and select new destination
Cancel and return to Main Menu
Send Messages
Send a Message
While recording a message, you can press:
Pause/Resume (toggle or 30 seconds)
End recording
Select from the following:
Mailbox number plus
Directory plus name
Personal Distribution List (1~25)
Press when finished.
Set the Hour (1~12)
AM
PM
Set the Minutes (0~59)
Set the Day (1~31)
Set the Month (1~12)
Set the Year (last two digits)
Return to previous menu (message delivery time plays)
4555
Stratagy ES User Guide 04/05 39
Send Messages
Send a Message
1. From the Main Menu, press
.
2. Enter
one of the following
destinations:
0DLOER[QXPEHU plus .
Press
again to record a
message without playing the user’s name.
Stratagy ES prompts you to enter the destination (i.e., mailbox number, Personal or System Distribution List, or Multiple Destinations).
If you entered a user’s mailbox number, Stratagy ES plays the user’s name or mailbox number for confirmation.
If you entered a system distribution list mailbox number, Stratagy ES plays the list comment or number for confirmation. Ask your System Administrator for more information about system lists available to you.
Note If your Stratagy ES system is designed
with a fixed length number for your mailbox number, do not press
after
entering a mailbox number. See your System Administrator for specific operation of your system.
40 Stratagy ES User Guide 04/05
Send Messages
Send a Message
 Directory plus the first
letters (Q=7, Z=9) of
Stratagy ES plays the first match for the combination of letters you entered.
the user’s first or last name
Note See your System Administrator for
specific operation of your system.
...or the first letters of a system distribution list name.
Note Entry must be at least
three letters long.
Press
to select the
name as the destination,
to hear the next name,
or
to cancel your
entry and re-enter.
 plus a Personal
Distribution List number (
~).
Stratagy ES plays the list comment or number for confirmation. See “Manage Personal
Distribution Lists” on page 74 to create or
revise a destination (distribution) list.
 Multiple Destinations You are prompted for the destinations: mailbox
number, directory and/or
 Personal
Distribution List.
Note If you forget to enter any destination(s),
you can press
Additional Destinations
after you record your message to add destinations (see page 42).
3. Record a message after the tone. When finished, press
.
While recording, you can press
to pause/resume
(toggle or 30 seconds) the recording.
Stratagy ES User Guide 04/05 41
Send Messages
Send a Message
4. Press again to send the message immediately
Stratagy ES tells you that your message has been sent and returns you to the Main Menu.
Important! If you pressto send your
...or before sending the message, you can use all of the following options in any combination as often as desired.
Review recording The recording plays.
Re-record
The system prompts you to record at the beep.
Presswhen done.
Append recording
The appended recording plays after the already recorded portion of the message. The system
Presswhen done.
Select Additional
Destinations
Special Delivery
Options
prompts you to record at the beep.
Send the message to additional destinations. (See Step 2 on page 40 for instructions.)
You can send a message as urgent, private, or with a return receipt request. The settings may be used in any combination and may be changed prior to sending the message.
message, you cannot use the special recording and sending options.
See “Special Delivery Options” on page 48 for instructions on using this option.
Set Future Delivery You can have your message delivered at a future
specified time and date. See “Future Delivery” on page 49 for instructions on using this option.
Cancel message and
select new destination
Cancel and Return to

the Main Menu
Cancels the message and returns you to Step 2 on page 40.
Cancels the message and returns you to the Main Menu.
42 Stratagy ES User Guide 04/05

Forward a Message

Any message sent to you that is not marked as Private can be forwarded to a single destination or a personal or system distribution list. When forwarding a message, recording a message (comment) is optional.
Send Messages
Forward a Message
1. From the Play Messages Menu, press
2. Enter
.
one of the following
destinations:
0DLOER[QXPEHU plus .
Press
again to record a
message without playing the user’s name.
 Directory plus the first
letters (Q=7, Z=9) of the user’s first or last name
...or the first letters of a system distribution list name.
Stratagy ES prompts you to enter the destination (i.e., mailbox number, Personal or System Distribution List or Multiple Destinations).
If you entered a user’s mailbox number, Stratagy ES plays the user’s name or mailbox number for confirmation.
If you entered a system distribution list mailbox number, Stratagy ES plays the list comment or number for confirmation. Ask your System Administrator for more information about system lists available to you.
Note If your Stratagy ES system is designed
with a fixed length number for your mailbox number, do not press
after
entering a mailbox number. See your System Administrator for specific operation of your system.
Stratagy ES plays the first match for the combination of letters you entered.
Note See your System Administrator for
specific operation of your system.
Note Entry must be at least
three letters long.
Stratagy ES User Guide 04/05 43
Send Messages
Forward a Message
3. (Optional) Press a message (comment) after the tone. When finished, press
While recording, you can press (toggle or 30 seconds) the recording.
4. Press the message immediately
Pressto select the name as the destination,
to hear the next name,
or
to cancel your entry
and re-enter.
 plus a Personal
Distribution List number (
~).
Stratagy ES plays the list comment or number for confirmation. See “Manage Personal
Distribution Lists” on page 74 to create or
revise a destination (distribution) list.
 Multiple Destinations You are prompted for the destinations: mailbox
number, directory and/or
 Personal
Distribution List.
Note If you forget to enter any destination(s),
you can press
Additional Destinations
after you record your message to add destinations (see page 45).
to record
.
to pause/resume
 again to forward
Stratagy ES tells you that your message has been forwarded and returns you to the Main Menu.
Important! If you press to forward your
message, you cannot use the special recording and sending options.
44 Stratagy ES User Guide 04/05
Send Messages
Forward a Message
...or before sending the message, you can use any of the following options:
Review recording The forwarding comment plays.
Re-record
The system prompts you to record the comment at the beep.
when done.
Press
Append recording
The appended forwarding comment plays after the already recorded message comment. The
when done.
Press
Select Additional
Destinations
system prompts you to record at the beep.
Send the forwarded message to additional destinations. (See Step 2 on page 43 for step-by­step instructions.) You may repeat this step as often as necessary.
Special Delivery
Options
You can send a message as urgent, private, or with a return receipt request. The settings may be used in any combination and may be changed prior to sending the message.
See “Special Delivery Options” on page 48 for instructions on using this option.
Set Future Delivery You can have your message delivered at a future
specified time and date. See “Future Delivery” on page 49 for instructions on using this option.
Cancel message and
select new destination
Cancel and Return to

the Main Menu
Cancels the message and returns you to Step 2 on page 43.
Cancels the message and returns you to the Main Menu.
Stratagy ES User Guide 04/05 45
Send Messages

Reply to Current Message

Reply to Current Message
Stratagy ES lets you reply to a message that you are currently playing.
When you reply to a message sent from within a Stratagy ES user’s mailbox, you do not have to select a destination since Stratagy ES “remembers” the source of the message. You can send the reply to additional destinations.
If the message was not recorded from a user’s mailbox, you may still reply to the message but you must enter the destination mailbox number.
When the originator(s) receives and plays the reply, he/she hears the prompt, “Reply message from [name or mailbox number].”
1. From the Play Messages Menu, press
2. (Optional) If the message was not recorded from a user’s mailbox, you must enter a destination (see Step
2 on page 40 for
instructions).
3. Record your reply after the tone. When finished, press
.
While recording, you can press
to pause/resume
(toggle or 30 seconds) the recording.
4. Press
 again to send the
reply immediately
.
You are prompted to record your reply to the message.
Stratagy ES tells you that your reply has been sent and returns you to the Main Menu.
Important! If you press to send your reply
you cannot use the special recording and sending options.
46 Stratagy ES User Guide 04/05
Send Messages
Reply to Current Message
...or before sending the message, you can use any of the following options:
Review recording The recording plays.
Re-record
The system prompts you to record at the beep.
Presswhen done.
Append recording
Presswhen done.
Select Additional
Destinations
Special Delivery
Options
The appended recording plays after the already recorded portion of the message. The system prompts you to record at the beep.
Send the message to additional destinations. (See Step 2 on page 40 for instructions.)
You can send a message as urgent, private, or with a return receipt request. The settings may be used in any combination and may be changed prior to sending the message.
See “Special Delivery Options” on page 48 for instructions on using this option.
Set Future Delivery You can have your message delivered at a future
specified time and date. See “Future Delivery” on page 49 for instructions on using this option.
Cancel reply Cancels the reply and returns you to Step 3 on
Cancel and Return

to the Main Menu
page 46.
Cancels the message and returns you to the Main Menu.
Stratagy ES User Guide 04/05 47
Send Messages

Special Delivery Options

Special Delivery Options
You can send a message as urgent, private, or with a return receipt request. The settings may be used in any combination and may be changed prior to sending the message.
When you send, forward or reply to a message, this option is available by pressing Special Delivery Options.
³ Enter an option number:
Set Urgent status
(toggle)
Urgent messages play first in the New Message Folder.
To remove the urgent status, press
then
again.
Set Private status
Private messages cannot be forwarded.
(toggle)
To remove the private status, press
then
again.
Set Return Receipt
request (toggle)
Stratagy ES notifies you when and by whom the message was received and plays the original message.
To remove the return
Only messages that have been deleted, saved, or
receipt request, press then
again.
marked as Pending (if so enabled) by the destination mailbox submit a Return Receipt notification.
Return to previous
Stratagy ES returns you to the previous menu.
menu

48 Stratagy ES User Guide 04/05

Future Delivery

Stratagy ES can be configured so that your message is delivered at a future specified time and date. When you send, forward or reply to a message, this option is available by pressing
Since each of the settings default to the current time/date, you do not need to enter all the options. For example, if you have recorded a message and want to have it delivered that afternoon at 2:30 p.m., you only need to enter the hour (2), select p.m. and enter the minutes (30) using options 1 and 2.
After marking the message for future delivery, you can review (play, save, delete) the message at any time before it is sent. See Chapter 3 – Play Messages for instructions on using the Future Delivery Review option.
³ Enter an option number and
Set Future Delivery.
press
.
Set Hour (~)
AM PM
Set Minutes (~)
Set Day (~)
Set Month (~)
Set Year (two or four
digits)
Return to previous
menu
Send Messages
Future Delivery
Stratagy ES prompts you to select a.m. or p.m.
Two-digit numbers less than the last two digits of the current year are set for the twenty-first century. For example, enter
 to set 2001.
Stratagy ES plays the message delivery time and date and returns you to the previous menu.
Note Once the message has been sent, you
can review, continue to send (save), or delete this message using the Future Delivery Review option on the Play Messages Menu. (See Chapter 3 – Play
Messages.)
Stratagy ES User Guide 04/05 49
Send Messages

Send a Direct Fax

Send a Direct Fax
Stratagy ES enables you to send a fax to a mailbox when you are calling from a fax machine handset.
1. Put the document to be faxed into the fax machine.
2. From the fax machine handset, dial the number for Stratagy ES.
3. Press
4. Enter the destination
5. (Optional) Press
. The system prompts you to enter the destination
mailbox. Finish by pressing
.
to record
a comment.
Begin recording at the tone. Finish by pressing
After recording, you can press:
Review comment The complete comment plays.
Re-record
The company greeting plays.
mailbox for your fax.
Stratagy ES prompts you to record a comment, enter an additional destination or send the fax.
The system prompts you to record at the beep.
.
The system prompts you to record at the beep.
Press when done.
Append recording
Presswhen done.
Cancel recording The comment is canceled. The system returns to
The appended comment plays after the already recorded portion. The system prompts you to record at the beep.
the previous menu.
Save recording Stratagy ES tells you that the comment has been
recorded and returns to the previous menu.
50 Stratagy ES User Guide 04/05
Send Messages
Send a Direct Fax
6. (Optional) Press Additional Destinations.
7. Press the
6WDUW key on the
fax machine and hang up the handset.
Send the message to additional destinations. (See Step 2 on page 43 for step-by-step instructions.) You can repeat this step as often as necessary.
The fax is processed and sent to the destination mailbox(es).
Stratagy ES User Guide 04/05 51
Send Messages
Send a Direct Fax
52 Stratagy ES User Guide 04/05

Manage Mailbox 5

Stratagy ES provides special options to customize and manage your mailbox features (menu shown below).
From the Main Menu:
Manage Mailbox
Change Greeting
Change User Options
Manage Personal Distribution Lists
Manage Guest Mailboxes
Manage Personal Folders
Return to Main Menu
4576
Stratagy ES User Guide 04/05 53
Manage Mailbox

Change Greeting

Change Greeting
You can select either a personal or system greeting to play callers when you do not answer or when your telephone is busy.
This section discusses the three basic greeting controls (menu shown below):
Create or record over a personal greeting
Select a personal greeting
Review a personal greeting
From the Main Menu:
From the Manage Mailbox Menu:
Manage Mailbox
Change Greeting
~ Select a Personal Greeting
Select System Greeting
Review selected greeting
Record (new) greeting
Review recording
Re-record
Append recording
Cancel recording
Save recording
Return to previous menu
Review current greeting
Return to previous menu
4550
54 Stratagy ES User Guide 04/05
Manage Mailbox
Change Greeting

Create or Record Over a Personal Greeting

Personal greetings should be informative and advise callers when you will be available to return their calls or respond to their messages. You can prerecord greetings for the days of the week when you are out of the office or on vacation. You can update personal greetings as often as you want.
You can record and store up to seven different recorded greetings from which you can select as your personal greeting. The System Administrator can also schedule your greetings to play automatically at different times.
1. From the Manage Mailbox Menu, press
2. Enter a number from
3. Press
to record the
.
~. Your greeting is identified by the number
greeting (speak slowly and clearly). Press
when
done.
Stratagy ES plays the Change Greeting options.
chosen. For example, you can record a general greeting as greeting 1, then record a greeting for holidays as greeting 2. Later, you can choose which one plays. You can re-record a greeting at any time.
The following information should be included in your Personal Greeting:
x
Your name
x
Company and/or department
x
Date
x
Your availability
x
Instructions to leave a detailed message
x
Call coverage options
Sample Greeting
“Hi. This is Mary Smith of the Toshiba Marketing Department. It is Monday, June 19, and I am in the office today. I am either on the telephone or have stepped away for a few minutes and your call has been forwarded to my voice mailbox. If at the tone you leave a detailed message and a telephone number where I can reach you, I will be happy to return your call.”
Stratagy ES User Guide 04/05 55
Manage Mailbox
Change Greeting
4. (Optional) After recording, you can press:
Review recording The complete greeting plays.
Re-record
when done.
Press
Append recording
when done.
Press
You can repeat options 1~3 as many times as you wish.
The system prompts you to record at the beep.
Appending a greeting enables you to add information to the end of your already recorded greeting. The system prompts you to record at the beep.
Cancel recording The greeting is canceled. The system returns to
the previous menu.
Save recording Stratagy ES tells you that greeting (number) has
been recorded and returns to the previous menu. Again, you are given the option to review or record over the greeting you have just recorded.
5. Press
6. Press
7. Repeat Step 3 on page 55
to return to the
previous menu.
and select another
greeting number (
~).
for any additional greetings you want to record.
You are given the option to record another greeting.
Important! The last greeting selected or
recorded is the greeting that callers hear as your mailbox greeting.
8. To return to the Main Menu, press
.
Stratagy ES plays the Main Menu options.
56 Stratagy ES User Guide 04/05

Select a Personal Greeting

Manage Mailbox
Change Greeting
1. From the Manage Mailbox Menu, press
.
2. Enter a personal greeting number (
...or
~)
to select the system
greeting.
...or
to review the current
greeting.
3. Press
to return to the
previous menu
...or
 to return to the
Manage Mailbox Menu
...or
to return to the
Main Menu.
Stratagy ES plays the Change Greeting options.
Your callers hear the selected greeting when you do not answer or when your telephone is busy.
Your callers hear the system greeting when you do not answer or when your telephone is busy.
Note If you have recorded a busy greeting,
this greeting does not play when your telephone is busy (see “Select Busy
Greeting”
Important! The last greeting selected or
on page 63 for details).
recorded is the greeting that callers hear as your mailbox greeting.
The current greeting plays.
Stratagy ES returns to the previous menu.
The Manage Mailbox Menu plays.
The Main Menu plays.
Stratagy ES User Guide 04/05 57
Manage Mailbox
Change Greeting

Review a Personal Greeting

1. From the Manage Mailbox Menu, press
2. Press
3. Press
current greeting
...or enter a number from
~, then press to review
the greeting.
to return to the
previous menu
...or
 to return to the
Manage Mailbox Menu
...or
to return to the
Main Menu.
.
to review the
Stratagy ES plays the Change Greeting options.
The current greeting plays. Stratagy ES prompts you with the Change Greeting Menu options.
Note Pressing
greeting selection.
The greeting plays. Stratagy ES prompts you with the Change Greeting Menu options.
Stratagy ES returns to the previous menu.
The Manage Mailbox Menu plays.
The Main Menu plays.
does not affect the current
58 Stratagy ES User Guide 04/05

Change User Options

Stratagy ES provides a number of special options to improve time management and productivity (menu shown below). For example, the DND feature can provide blocks of time for meetings or projects uninterrupted by the ringing of a telephone.
From the Main Menu:
Manage Mailbox
From the Manage Mailbox Menu:
Change User Options
Change Do Not Disturb (On/Off)
Change Call Screening (On/Off)
Change Security Code
Select Busy Greeting (toggle)
Record Busy Greeting
Record your Name
Change message Notification
Set Automatic Message Copy
Review Option Settings
Return to previous menu
Manage Mailbox
Change User Options
4553
Important!
If you do not hear all the options for this menu, they may not be configured for your
mailbox or system. Please ask your System Administrator to verify which user options are available to you.
If the DND, Call Screening or busy greeting features do not function after you have
enabled them, contact your System Administrator. These features can only operate if Stratagy ES performs as the Automated Attendant (AA) and your telephone system or telephone may be performing that function instead.
Stratagy ES User Guide 04/05 59
Manage Mailbox
Change User Options

Change Do Not Disturb (DND) Setting

If you set this feature to On, Stratagy ES automatically sends calls to your mailbox without first ringing your telephone. The System Administrator can also set this feature to turn On or Off automatically at pre-scheduled times and/or days of the week.
1. From the Manage Mailbox Menu, press
2. Press
. A prompt verifies the current status (On/Off) of
3. (Optional) Press
.
again to
reset the feature, if required.
4. Press
to return to the
Manage Mailbox Menu
...or
to return to the
Main Menu.
Stratagy ES plays the Change User Options Menu.
the DND feature.
Important! DND on the Stratagy ES voice
processing system is different from the DND features for your telephone system. If your telephone comes with a DND button or feature, it works independently from this feature on Stratagy ES.
Pressing toggles the DND feature On and Off.
You can select another user Manage Mailbox option.
You can select another Main Menu option.
60 Stratagy ES User Guide 04/05
Manage Mailbox
Change User Options

Change Call Screening Setting

If you set this feature to On, Stratagy ES asks callers for their name and company. Without the caller’s knowledge, the system relays that information to you and provides you with special options to handle the call (menu shown below).
Receive the call
Reject the call and let the call forward
to your mailbox
Transfer
with an announcement
Transfer the call to another extension
without an announcement
The System Administrator can also set this feature to turn On or Off automatically at pre-scheduled times and/or days of the week.
the call to another extension
1. From the Manage Mailbox Menu, press
2. Press
. A prompt verifies the current status (On/Off) of
.
Stratagy ES plays the Change User Options Menu.
the Call Screening feature.
3. (Optional) Press reset the feature, if
again to
Pressing toggles the Call Screening feature On and Off.
required.
4. Press
to return to the
Manage Mailbox Menu
...or
to return to the
You can select another user Manage Mailbox option.
You can select another Main Menu option.
Main Menu.
Stratagy ES User Guide 04/05 61
Manage Mailbox
Change User Options

Change Security Code

Each mailbox in the system has a security code. The code must be entered by you in order to “log on” to your mailbox, enabling you to access your messages, settings, greetings, etc.
Note You can change your security code as often as you wish to ensure the privacy
of your messages and personal greetings.
1. From the Manage Mailbox Menu, press
2. Press
. Stratagy ES prompts you to enter your new
.
3. Enter your new security code +
.
4. Re-enter your new security code +
.
Stratagy ES plays the Change User Options Menu.
security code and notifies you of the number of allowable digits.
For example, Stratagy ES might prompt “the new security code must have at least 3 digits and 16 maximum digits” or “the new security code must be exactly 4 digits.”
Stratagy ES prompts you to re-enter your new security code for verification.
After entering the security code a second time, Stratagy ES announces that your security code has been changed.
62 Stratagy ES User Guide 04/05

Select Busy Greeting

Manage Mailbox
Change User Options
1. From the Manage Mailbox Menu, press
2. Press
. A prompt verifies the current status (custom/
3. (Optional) Press
.
again to
reset the feature, if required.
4. Press
to return to the
Manage Mailbox Menu
...or
to return to the
Main Menu.
Stratagy ES plays the Change User Options Menu.
system) of the Busy Greeting feature.
Pressing toggles between selecting your custom busy greeting and the system busy greeting.
Note The custom busy greeting must be
recorded before it can be selected (see
“Create or Record Over Busy Greeting”
on page 64).
You can select another user Manage Mailbox option.
You can select another Main Menu option.
Stratagy ES User Guide 04/05 63
Manage Mailbox
Change User Options

Create or Record Over Busy Greeting

You can record your own custom busy greeting (menu shown below) that plays when callers reach your extension and it is busy. While your callers are listening to the busy greeting, they can enter a different mailbox number, press your mailbox by the System Administrator), or remain on the line to leave a message.
From the Change User Options Menu:
Record Busy Greeting
Record a greeting
Press when done.
Review recording
Re-record
Append recording
Cancel recording
Save recording
Note Depending on the configuration of your telephone and telephone system,
Stratagy ES may not receive a busy tone when callers reach your extension. If Stratagy ES doesn’t receive a busy tone, your selected personal greeting plays instead.
to hold (if configured for
4556
If a custom greeting is not recorded, the default system busy greeting plays.
64 Stratagy ES User Guide 04/05
Manage Mailbox
Change User Options
1. From the Manage Mailbox Menu, press
2. Press
. Stratagy ES prompts you to record your custom
.
Stratagy ES plays the Change User Options Menu.
busy greeting.
3. Begin recording at the tone. Press
when done.
Sample Greeting:
“Thanks for calling. I’m currently on the phone. If you would like to hold, press star, or you can leave me a message after the tone.”
4. (Optional) After recording, you can press:
Review greeting The complete greeting plays.
Re-record
The system prompts you to record at the beep.
Begin recording at the tone. Press
when
done.
Append recording
The appended greeting plays after the already recorded portion of the greeting. The system
Begin recording at the tone. Press
when
prompts you to record at the beep.
done.
Cancel recording The greeting is canceled. The system returns to
the previous menu.
Save recording Stratagy ES tells you that the greeting has been
recorded and returns to the previous menu.
5. Press
to return to the
Manage Mailbox Menu
...or
to return to the
You can select another user Manage Mailbox option.
You can select another Main Menu option.
Main Menu.
Stratagy ES User Guide 04/05 65
Manage Mailbox
Change User Options

Record Your Name

Your name is announced whenever the directory is accessed, you select the system greeting, or a message is sent by another Stratagy ES user.
Stratagy ES prompts you through the entire recording sequence (menu shown below). You can re-record your name at any time simply by repeating these steps.
From the Change User Options Menu:
Record your Name
Record your name and
press when done.
Review recording
Re-record
Append recording
Cancel recording
Save recording
4557
Note Some Stratagy ES systems may not be configured to play your name when
you log on to your mailbox.
66 Stratagy ES User Guide 04/05
Manage Mailbox
Change User Options
1. From the Manage Mailbox Menu, press
2. Press
. Stratagy ES prompts you to record your name.
.
Stratagy ES plays the Change User Options Menu.
3. At the tone, state your name slowly and clearly.
Press
when done.
4. (Optional) After recording, you can press:
Review recording Your newly recorded name plays.
Re-record
You can re-record your name as often as you wish.
when done.
Press
Append recording
You can add a short comment that plays at the end of the recording (for example, a vacation
when done.
Press
Cancel recording You can cancel your newly recorded name (and
announcement).
extension) and return to the previous menu.
Save recording Stratagy ES confirms that your name has been
recorded. Stratagy ES returns to the previous menu.
When your mailbox is accessed, you can select either the system or personal greeting to play.
See Chapter 5 – Manage Mailbox for instructions on selecting and creating greetings.
Stratagy ES User Guide 04/05 67
Manage Mailbox
Change User Options

Change Message Notification

Your mailbox can have notification records programmed by the System Administrator with a specific notification method (message waiting lights, pagers, voice, etc.) and the time/day when that notification record applies. The repeat count (how many times the notification is attempted) and interval for retrying the notification is also set.
Once you have enabled a notification record by entering the template number (menu shown below), Stratagy ES automatically performs the chosen notification method.
The Stratagy ES enables you to change digits that a notification may use in an attempt to notify you of a message. These digits could be the number where you can be reached, your paging service, or the number that displays in a digital pager’s LCD screen. It depends on how the notification event has been programmed.
From the Change User Options Menu:
Change message Notification
Enter notification template number
or enter for a list of templates
Enable/Disable notification template (toggle)
Change notification digits
Save changes
Return to previous menu
4558
1. From the Manage Mailbox Menu, press
2. Press
. You are told the number of notification records
.
Stratagy ES plays the Change User Options Menu.
you have and are prompted to enter the notification record number.
3. Enter the notification template number
Stratagy ES confirms the template number, either speaks or spells the template title, states whether the template is enabled or disabled, and tells you the phone number (if applicable).
68 Stratagy ES User Guide 04/05
Manage Mailbox
Change User Options
...or if you do not remember the template number you want, press
Press notification template or
.
to select the
to
The system plays a template header record for each notification template consisting of the template number and title (e.g., CTX message light on). After each header record plays, you are asked to select the record or hear the next record.
hear the next record.
4. Press an option number:
Enable/disable
notification template (toggle)
Change notification
Pressing toggles the notification template between Enable and Disable. After pressing prompt verifies the current status.
Stratagy ES verifies the number entered.
digits
Enter the new notification digits and
.
press
Save changes Stratagy ES tells you that the notification
template changes have been recorded. Stratagy ES returns to the previous menu.
Return to previous
menu
Stratagy ES cancels the change message notification options and returns to the previous menu.
5. Press
to return to the
Manage Mailbox Menu
...or
to return to the
You can select another user Manage Mailbox option.
You can select another Main Menu option.
Main Menu.
, a
Stratagy ES User Guide 04/05 69
Manage Mailbox
Change User Options

Set Automatic Message Copy

When enabled, the Automatic Message Copy feature (menu shown below) automatically copies messages from your mailbox to a designated mailbox.
You can choose to copy all your messages or only the messages marked urgent, designate the mailbox destination for the copies, and set the time of day for copying the messages that arrive at your mailbox. You can also set a time delay, if one is needed.
From the Change User Options Menu:
Set Automatic Message Copy
Copy All Messages
Copy Urgent Messages
Return to previous menu
4559
Enable/Disable copy (toggle)
Enter copy Destination
Confirm
Re-enter
Cancel and return to previous menu
Set Delay Time
Set Hour
Set Minutes
Set Day
Save changes and return to previous menu
Set copy Start Time
Set Hour
AM
PM
Set Minutes
Return to previous menu
Set copy End Time
Set Hour
AM
PM
Set Minutes
Return to previous menu
Save changes and return to
previous menu
Return to previous menu
70 Stratagy ES User Guide 04/05
Manage Mailbox
Change User Options
1. From the Manage Mailbox Menu, press
2.
Press . Stratagy ES plays the Automatic Message Copy
.
Stratagy ES plays the Change User Options Menu.
Menu.
3. Press
to copy all
messages
Stratagy ES confirms the automatic message copy for all messages is enabled/disabled, the mailbox where the message will be copied, delay time, and auto copying starting/ending times.
...or
to copy only urgent
messages
Stratagy ES confirms the automatic message copy for urgent messages is enabled/disabled, the mailbox where the message will be copied, delay time, and auto copying starting/ending times.
...or
to return to previous
Stratagy ES returns to the previous menu.
menu.
4. (Optional) You can select all of the following options in any combination:
Enable/Disable (toggle) Pressing  toggles the message copy feature On/
Off.
Enter message
destination
Press
to confirm the
number, re-enter, or
to erase and
to cancel
A prompt verifies the mailbox number and prompts you for an entry of
Pressing
saves the mailbox number.
,  or
.
and return to previous menu.
Stratagy ES User Guide 04/05 71
Manage Mailbox
Change User Options
Set delay time Stratagy ES prompts you to enter the time.
Set Copy Start Time. Stratagy ES prompts you to enter the time.
Set Copy End Time. Stratagy ES prompts you to enter the time.
Select
one of the
Only one of the following entries are allowed.
following:
Set hour System prompts for number of hours to delay
message (maximum is 24 hours). Once you have entered the value, Stratagy ES saves the entry and returns to the previous menu.
Set minutes System prompts for number of minutes to delay
message (maximum is 60 minutes). Once you have entered the value, Stratagy ES saves the entry and returns to the previous menu.
Set day System prompts for number of days to delay
message (maximum is 25 days). Once you have entered the value, Stratagy ES saves the entry and returns to the previous menu.
Returns to previous
menu
Saves current entry and returns to the auto copy message.
Enter an option number and press
Set Hour (~)
Set Minutes (~)
.
Stratagy ES prompts you to select AM or PM.
AM PM
Enter an option number and press
Set Hour (~)
Set Minutes (~)
.
Stratagy ES prompts you to select AM or PM.
AM PM
72 Stratagy ES User Guide 04/05
Manage Mailbox
Change User Options
Saves changes and
returns to previous menu.
Cancel changes and
returns to previous menu.
Return to the Manage
Mailbox Menu
...or
to return to
Main Menu.

Review Option Settings

1. From the Manage Mailbox Menu, press
2. Press
3. Press

Option Settings.
to return to the
Manage Mailbox Menu
...or
to return to the
Main Menu.
.
to Review your
Saves the changes and returns to the auto copy message.
Cancels changes and returns to the auto copy message.
You can select another user Manage Mailbox option.
You can select another Main Menu option.
Stratagy ES plays the Change User Options Menu.
Stratagy ES verifies the status of your DND, Call Screening options and plays your selected busy message and name recording.
You can select another user Manage Mailbox option.
You can select another Main Menu option.
Stratagy ES User Guide 04/05 73
Manage Mailbox


Manage Personal Distribution Lists

Manage Personal Distribution Lists
The Manage Personal Distribution Lists feature enables you to create and manage up to 25 personal distribution lists. The lists consist of the mailboxes to which you most frequently send messages.
At the time you create a list, you are given the option of recording a “list comment” that serves as the title or name for the list. The comment plays each time you use the list to confirm that you have chosen the correct distribution list.
From the Manage Personal Distribution Lists Menu (shown below), you can review the list contents, add and delete mailboxes to the list, and record a list comment.
From the Main Menu:
Manage Mailbox
From the Manage Mailbox Menu:
Manage Personal Distribution Lists
Select ~ for a Personal Distribution Lists
Review current list
Add a mailbox to the list
Delete a mailbox from the list
Record a list Comment
Return to previous menu
to previous menu
Return
1. From the Manage Mailbox Menu, press
.
Stratagy ES plays the Manage Personal Lists options.
2. Select the desired list number
~.
3. After selecting a list, you can press:
Review your current list The system prompts you with the name (and
extension) of each mailbox on the list.
Add a Mailbox to the
list
Stratagy ES prompts you to enter the mailbox number.
74 Stratagy ES User Guide 04/05
Manage Mailbox
Manage Personal Distribution Lists
Enter the mailbox number or press Stratagy ES directory assistance. Press done.
Delete a Mailbox from
the list
Enter the mailbox number or press Stratagy ES directory assistance. Press done.
Record a list Comment
Record your comment. Press
when done.
(Optional) After recording, you can press
to review recording,
to rerecord,
to append
the recording, cancel the recording or
to save the recording
and return to the previous menu.
4. Press previous menu
...or
to return to the
to return to the
Manage Mailbox Menu
to return to the
...or
Main Menu.
 for
when
 for
when
to
The name (and extension) plays. You can add additional mailbox numbers as needed.
Stratagy ES prompts you to enter the mailbox number.
The name (and extension) plays. The system prompts “Deleted.”
When sending a message, the comment plays each time the destination list is selected.
Stratagy ES prompts you to record the comment.
Stratagy ES returns to the previous menu.
You can select another Manage Mailbox option.
You can select another Main Menu option.
Stratagy ES User Guide 04/05 75
Manage Mailbox

Manage Guest Mailboxes

Manage Guest Mailboxes
Guest mailboxes provide limited access to the Stratagy ES system for temporary and project-oriented employees, such as consultants and contractors. Guest users may only send and receive messages to their host and other guests that share the same host mailbox.
The Guest mailboxes are selected from a system-generated list and assigned on a per­use basis. See your System Administrator for details if you have this feature.
Managing guest mailboxes entails creating and deleting guest mailboxes and resetting a guest password (menu shown below).
From the Main Menu:
Manage Mailbox
From the Manage Mailbox Menu:
Manage Guest Mailboxes
Create a Guest Mailbox
Delete a Guest Mailbox
Review your Guest Mailboxes
Reset Guest Password
Return to previous menu
4560
1. From the Manage Mailbox Menu, press
2. Select
Create a Guest Mailbox The system prompts with a Guest Mailbox
.
one of the following:
Stratagy ES plays the Manage Guest Mailboxes options.
number. Be sure to make a note of the number and the person you assign.
Delete a Guest Mailbox Stratagy ES prompts you to enter the mailbox
number.
Enter the mailbox number. Press
when
The system confirms the Guest Mailbox is deleted.
done.
76 Stratagy ES User Guide 04/05
Manage Mailbox

Use Guest Mailboxes

Review your Guest
Mailboxes
Reset Guest Password Stratagy ES prompts you to enter the mailbox
Enter the mailbox number.
3. Press
to return to the
Manage Mailbox Menu
...or
to return to the
Main Menu.
Use Guest Mailboxes
A guest user can access his/her mailbox in the same manner as a regular Stratagy ES user. The guest can play and send messages but is denied access to all Manage Mailbox Menu features except “
Note See “Access Your Mailbox” on page 18 for instructions on accessing the guest
mailbox.
Change Security Code” and “ Record your Name.”
The system lists your Guest Mailbox numbers.
number.
Stratagy ES resets the password for the guest mailbox.
You can select another user Manage Mailbox option.
You can select another Main Menu option.
Stratagy ES User Guide 04/05 77
Manage Mailbox

Manage Personal Folders

Manage Personal Folders
Your messages can reside in up to nine folders—one new, one saved and seven personal folders created by you for the purpose of saving your messages. The personal folders are for only your use.
At the time you create a folder, you are given the option of recording a “name/ comment” that serves as the title or name for the folder (menu shown below). The comment plays each time you use the folder to confirm that you have chosen the correct one.
When you access your mailbox, Stratagy ES announces that you have “x number of new messages and x number of saved messages.” When you press Messages menu to save a message, Stratagy ES plays the folder number and the recorded name/comment of each of the available folders.
You are requested to enter a valid folder number where you want the message saved. If an invalid number is entered, Stratagy ES automatically saves the message in folder
(i.e., standard save folder).
From the Main Menu:
Manage Mailbox
From the Manage Mailbox Menu:
Manage Personal Folders
Select ~ for a Personal Folder
Review folder name/comment
Record folder name/comment
Review recording
Re-record a folder Comment
Return to previous menu
a folder Comment
Append Cancel
recording
Save recording and return to previous
menu
from the Play
78 Stratagy ES User Guide 04/05
Manage Mailbox
Manage Personal Folders
1. From the Manage Mailbox Menu, press
2. Enter a number from
.
~. Number 1 is reserved for the standard save
Stratagy ES plays the Manage Personal Folders options.
folder and cannot be used.
3. After selecting a folder, you can press:
Review folder name/
The system plays the folder name and comment.
comment
Record the name and
comment
At the tone, state the folder name and comment slowly and clearly. Press
when
done.
4. (Optional) After recording, you can press:
Review recording The newly recorded folder name/comment
plays.
Re-record
Press
when done.
Append recording
Press
when done.
Cancel recording You can cancel your newly recorded folder
You can re-record the folder name/comment as often as you wish.
You can add a short comment that plays at the end of the original comment.
name/comment and return to the previous menu.
Save recording Stratagy ES confirms that the folder name/
comment has been recorded. Stratagy ES returns to the Manage Personal Folders menu.
Stratagy ES User Guide 04/05 79
Manage Mailbox
Manage Personal Folders
5. Press to return to the previous menu
...or
 to return to the
Manage Mailbox Menu
...or
to return to the
Main Menu.
Stratagy ES returns to the previous menu.
You can select another Manage Mailbox option.
You can select another Main Menu option.
80 Stratagy ES User Guide 04/05
Using Stratagy ES with a
Strata CIX/CTX A
This appendix covers the use of Stratagy ES voice mail with the Strata CIX/CTX. Call Forward, Message Waiting, CTX Proprietary Integration, Direct Transfer to Voice Mail and Voice Mail Conference features are all described.
Note Check with your System Administrator about your company’s phone system
and telephones.

Call Forward

Note See Strata CIX and CTX IPT/DKT Telephone User Guide for additional
information on programming and using this feature on your phone.
There are two types of Call Forwarding: System and Station.
System Call Forward (which is set in Programming) automatically directs calls to a
predefined location, such as Voice Mail.
Station Call Forward enables you to assign Call Forward destinations for each
extension on your phone. Each extension can be independently set for a different Call Forward feature. You can set a flexible button to perform any Call Forward function.
Call Forward must be set prior to receiving the call.
Note Station Call Forward takes priority over System Call Forward.
Table 1 on page 82 contains the Call Forward Button sequences for performing Call
Forward. There are two ways to perform each Call Forward function. One, enter the button sequence as described, or two, program a flexible button to perform the sequence.
Stratagy ES User Guide 04/05 81
Using Stratagy ES with a Strata CIX/CTX
Call Forward
³ To use the Call Forward button sequence
³ Follow the instructions in Table 1 below shown under “Button Sequence.” Some
features require additional input, such as:
Destination – If the destination is an outside number, press
destination. The CIX/CTX accepts destination numbers of up to 32 digits.
Timer – This is a two digit entry representing how long (8 to 160 seconds) your
telephone should ring before forwarding the call. If you enter one digit, you must press
Also, in the following table, (Tone) means that a confirmation tone plays at that point in the sequence.
Table 1 Call Forward Procedures
Feature Button Sequence
Call Forward - Station Call Forward Any Call (Internal and Incoming Line)
All Call Press Extension button +  (Tone) + Destination No. (Tone)
Busy Press Extension button +  (Tone) + Dest. No. (Tone)
No Answer Press Extension button +  (Tone) + Dest. No. (Tone) + Timer +
Busy No Answer Press Extension button +  + Dest. No. + Timer +
Cancel Press Extension button + (Tone)
Call Forward - System Call Forward - Incoming Line Calls
All Calls Extension button +  (Tone) + Dest. No. (Tone)
Busy Extension button +  (Tone) + Dest. No. (Tone)
No Answer Extension button +  + Dest. No. (Tone) + Timer (Tone) +
Busy No Answer Extension button +  + Dest. No. (Tone) + Timer (Tone) +
Cancel Extension button +  (Tone)
Call Forward - System
Activate #620 (Tone)
Cancel #621 (Tone)

after entering the single digit.

after entering the
82 Stratagy ES User Guide 04/05

Message Waiting

Use your 0VJLED/button and LCD to see/retrieve message(s).
An extension can receive up to four simultaneous Message Waiting indications and LCD messages. One message is reserved for the Message Center.
Your phone can be programmed to have up to four additional (flexible) Message Waiting buttons/LEDs. Ask if these buttons have been programmed on your phone. If so, substitute them when the

Responding to a Lit Msg LED

1. On an LCD phone, if you see a “+” press 6FUROO to display additional messages; otherwise, go to Step 2. The “+” indicates additional messages. The LCD can show up to three station messages for your extension and three for each additional (phantom) extension that you may have.
0VJ button/LED is mentioned in the following steps.
Using Stratagy ES with a Strata CIX/CTX
Message Waiting
2. Press
3. After answering the message(s), place the handset back on-hook.
4. If the Msg LED continues to flash, you have more messages; repeat Steps 1~3
5. To manually turn off your Msg LED, press your extension button, then press
0VJ, then lift the handset. Your phone rings the extension or voice mail
device that sent the indication. The LED continues to flash red.
above to retrieve them. Voice mail devices turn off the LED/LCD indications after a short delay, after you checked all messages.
. Do this step for each message received.
Stratagy ES User Guide 04/05 83
Using Stratagy ES with a Strata CIX/CTX

CTX Proprietary Integration

Turning On/Off Message Waiting LED on Another Exten­sion
If you call an extension and it’s busy or there is no answer, you can light that extension’s Message Waiting LED and enable that extension to call you back.
1. Dial an internal extension. You hear busy tone or there’s no answer.
2. Press
3. Press
4. To turn Off a Message LED that you have set on another extension, press
0VJ or . The Msg LED flashes red on the called phone. At your phone, the
Msg LED lights steady red and the LCD shows the station number where you set a Message Waiting light.
6SNU. Your Msg LED turns Off. The Msg LED on the called telephone
flashes until the called party presses the flashing back.
the extension number that has the message light set. Then hang up to release your telephone.
CTX Proprietary Integration
If your company’s Toshiba Strata CIX/CTX phone system has the Proprietary Integration with your Stratagy ES enabled, you have two additional features at your disposal—Soft Key Control of Voice Mail and Call Record to Voice Mail. If you cannot access these features, check with your System Administrator.

Soft Key Control of Voice Mail

If you have a Strata 3000 or 2000-series digital phone equipped with a Liquid Crystal Display (LCD), many standard functions of the Stratagy ES voice mail system can be displayed on the digital telephone LCD and operated by Soft Keys. Feature prompting makes voice mail functions easy to use via visual displays on the telephone in place of listening to voice prompts over the handset, although the Stratagy ES voice prompts still play when soft keys are used.
0VJ button - which calls you
 plus
Note For general information on using Soft Keys on your phone, please see the
Strata CIX and CTX IPT/DKT Telephone User Guide.
84 Stratagy ES User Guide 04/05
Using Stratagy ES with a Strata CIX/CTX
When your telephone is idle, and a message arrives for an extension on your phone, the Msg LED is activated for the appropriate extension and updates the LCD with this display (shown right). If urgent messages are in the extension’s mailbox, the SAVED display is replaced with the number of URGENT messages.
Once connected to your Stratagy ES voice mailbox, the LCD displays the Stratagy ES Main Menu options (shown at right). See Table 2 on page
86 below for a list of Main Menu soft keys.
Mode
Page
Soft Keys
Mode
Page
CTX Proprietary Integration
1 NEW/5 SAVED
DIRECT SS
SYSTEM SD
PERSONAL SD
EXTERNAL DIR
INTERNAL DIR
VOICE MAIL MAIN MENU
3 NEW / 2 SAVED
PLAY MSGS
MANAGE MBX
SEND
Feature
Scroll
5951
Soft Keys
Feature
Scroll
EXIT
Soft Keys
HANGUP
5951
Soft Keys
You are then able to perform many of the standard Stratagy ES voice mail functions using the Soft Keys on your phone (Play Messages menu example shown at right). See Table 3 on page 86 for a list of Soft Keys.
Mode
Page
Soft Keys
FRM: 5555
MSG LENGTH: 00:54
NEXT
SAVE
DELETE
BACKUP
PAUSE PLAY
GO FORWARD
REPLAY
PREVIOUS
FORWARD
SPL FUNCT
PREV MENU
Stratagy ES User Guide 04/05 85
Feature
Scroll
5953
Soft Keys
Using Stratagy ES with a Strata CIX/CTX
CTX Proprietary Integration
Table 2 Stratagy ES Main Menu Soft Keys for CIX/CTX Digital Telephones
IPT 2010-SD
IPT 2008-SDL
DKT 3014-SDL
PLAY MSGS PLAY PLAY Play Messages
SEND SEND SEND Send Messages
MANAGE MBX MGMT MGMT Manage Mailbox
IPT 1020-SD DKT 3007-SD DKT 3020-SD
DKT 2010-SD DKT 2020-SD
Voice Mail Functions
EXIT
HANGUP QUIT Disconnect from Stratagy ES
Exit Mailbox
Table 3 Soft Keys for CIX/CTX Digital Telephones
IPT 2010-SD
IPT 2008-SDL
DKT 3014-SDL
ACCEPT
ADD ADD ADD Create a Guest Mailbox
ADD DESTS Additional Destinations
ADD MBX ADD ADD Add a mailbox to the list
ALL MSGS
AM?
APPEND APND
AUTO COPY
BACK UP
BSY GRT REC
BUSY GREET
CALL SCREEN
CANCEL
CANCEL MSG CANC CNCL Cancel message and select new
IPT 1020-SD DKT 3007-SD DKT 3020-SD
DKT 2010-SD DKT 2020-SD
Voice Mail Functions
Confirm automatic copy destination
Copy All Messages
AM
Append recording
Set Automatic Msg Copy
Backup (rewind)
Record Busy Greeting
Select Busy Greeting (toggle)
Change Call Screening (On/Off)
Cancel recording
destination
86 Stratagy ES User Guide 04/05
Using Stratagy ES with a Strata CIX/CTX
CTX Proprietary Integration
Table 3 Soft Keys for CIX/CTX Digital Telephones (continued)
IPT 2010-SD
IPT 2008-SDL
DKT 3014-SDL
CHANGE Change notification digits
CHG GREETING
CONT DELETE
CONT PLAY
DATE & TIME DATE
DELAY TIME
DELETE DEL DEL Delete the message/guest mailbox
DELETE MBX DEL DEL Delete a mailbox from the personal
DELETE MSG Delete message (Future Delivery Review)
DESTINATION
DIRECTORY DIR DIR Directory plus name
DND DND DND Change Do Not Disturb (On/Off)
ENABLE/ DISABLE
END TIME
FOLDERS FLDR
FORWARD FWDFWD Forward the current message
FUTURE DLVR Set Future Delivery, Future Delivery
GO FORWARD Go forward (advance)
GUEST MBXES GST GST Manage Guest Mailboxes
IMM ALL FAX SNDN Immediate Fax (all faxes in folder)
IMM THS FAX SND1
IPT 1020-SD DKT 3007-SD
DKT 2010-SD DKT 2020-SD
Voice Mail Functions
DKT 3020-SD
GRT GRT Change Greeting
Continuous Delete
Continuous Play
Message Date and Time
Set Delay Time
distribution list
Enter automatic copy destination
Enable/Disable:
x
Notification template (toggle)
x
Automatic copy
Set copy End Time
New/Saved message folder
Review
Immediate Fax (current fax doc)
Stratagy ES User Guide 04/05 87
Using Stratagy ES with a Strata CIX/CTX
CTX Proprietary Integration
Table 3 Soft Keys for CIX/CTX Digital Telephones (continued)
IPT 2010-SD
IPT 2008-SDL
DKT 3014-SDL
MARK PRIVAT PRV PRV Set Private status (On/Off)
MARK URGENT
MSG FOLDERS
MSG NOTIFY
MULTI ENTRY MULTI MULTI Multiple Destinations
NAME RECORD
NEXT NEXT NEXT Play next message
NEXT MSG
NEXT NAME NEXT NEXT Play next name
PAUSE PAUS PAUS Pause recording
PAUSE PLAY Pause playback
PER DST LST LIST LIST Manage Personal Distribution Lists
PERSONAL LIST
PM? PM
PREVIOUS
PREV MENU PREV
REC COMMENT
RECORD REC REC Record
REENTER Re-enter automatic copy destination
REENTER NAM
IPT 1020-SD DKT 3007-SD DKT 3020-SD
URG URG Set Urgent status (On/Off)
FLDR FLDR Manage Personal Folders
NAME NAME Record your Name
LIST LIST Personal distribution list (1~25)
COMM COMM Record a list Comment
REDO REDO Re-enter name or Exit
DKT 2010-SD DKT 2020-SD
Voice Mail Functions
Change message Notification
Play next message (Future Delivery Review)
Play the Previous message
Return to previous menu
88 Stratagy ES User Guide 04/05
Loading...