Important!Toshiba Telecommunication Systems Division sells its products through
Authorized Dealers. Our Dealers are certified in Sales and Technical
Train ing for Toshiba products, and focus on providing the best possible
customer experience. Dealer services include: network assessments,
product recommendations, installations, and ongoing technical and
sales support. Before making any changes or updates to their Toshiba
Telecom product (hardwar e or software), Toshiba advises Businesses to
contact their System's installing Dealer or an Authorized Toshiba
Dealer in their area.
To locate a Toshiba Telecom dealer, visit: www.telecom.toshiba.com
Publication Information
Toshiba America Information Systems, Inc.,
Telecommunication Systems Division, reserves the right,
without prior notice, to revise this information publication for
any reason, including, but not limited to, utilization of new
advances in the state of technical arts or to simply change the
design of this document.
Further, Toshiba America Information Systems, Inc.,
Telecommunication Systems Division, also reserves the right,
without prior notice, to make such changes in equipment
design or components as engineering or manufacturing
methods may warrant.
DP5000-UG-VC
Version C.2, October 2010
CAUTION! Do not use cleansers that contain benzene, paint thinner, alcohol or other solvents on the telephone's
rubber feet. The color of the rubber may transfer to the desk or mounting surface.
All rights reserved. No part of this manual, covered by the
copyrights hereon, may be reproduced in any form or by any
means—graphic, electronic, or mechanical, including
recording, taping, photocopying, or information retrieval
systems—without express written permission of the publisher
of this material.
Strata is a registered trademark of Toshiba Corporation.
Stratagy is a registered trademark of Toshiba America
Information Systems, Inc.
Trademarks, registered trademarks, and service marks are the
property of their respective owners.
TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TAIS”)
Telecommunication Systems Division License Agreement
IMPORTANT: THIS LICENSE AGREEMENT (“AGREEMENT”) IS A LEGAL AGREEMENT BETWEEN YOU (“YOU”) AND TAIS. CAREFULLY READ THIS LICENSE AGREEMENT. USE OF ANY
SOFTWARE OR ANY RELATED INFORMATION (COLLECTIVELY, “SOFTWARE”) INSTALLED ON OR SHIPPED WITH A TAIS TELECOMMUNICATION SYSTEMS PRODUCT OR OTHERWISE MADE
AVAILABLE TO YOU BY TAIS IN WHATEVER FORM OR MEDIA, WILL CONSTITUTE YOUR ACCEPTANCE OF THESE TERMS, UNLESS SEPARATE TERMS ARE PROVIDED BY THE SOFTWARE
SUPPLIER. IF YOU DO NOT AGREE WITH THE TERMS OF THIS LICENSE AGREEMENT, DO NOT INSTALL, COPY OR USE THE SOFTWARE AND PROMPTLY RETURN IT TO THE LOCATION
FROM WHICH YOU OBTAINED IT IN ACCORDANCE WITH APPLICABLE RETURN POLICIES. EXCEPT AS OTHERWISE AUTHORIZED IN WRITING BY TAIS, THIS SOFTWARE IS LICENSED FOR
DISTRIBUTION THROUGH TAIS AUTHORIZED CHANNELS ONLY TO END-USERS PURSUANT TO THIS LICENSE AGREEMENT.
1. License Grant. The Software is not sold; it is licensed upon payment of applicable charges. TAIS grants to you a personal, non-transferable and non-exclusive right to use the copy of the Software
provided under this License Agreement. You agree you will not copy the Software except as necessary to use it on one TAIS system at a time at one location. Modifying, translating, renting, copying,
distributing, printing, sublicensing, transferring or assigning all or part of the Software, or any rights granted hereunder, to any other persons and removing any proprietary notices, labels or marks from the
Software is strictly prohibited except as permitted by applicable law; you agree violation of such restrictions will cause irreparable harm to TAIS and provide grounds for injunctive relief, without notice,
against you or any other person in possession of the Software. You and any other person whose possession of the software violates this License Agreement shall promptly surrender possession of the
Software to TAIS, upon demand. Furthermore, you hereby agree not to create derivative works based on the Software. TAIS reserves the right to terminate this license and to immediately repossess the
software in the event that you or any other person violates this License Agreement. Execution of the Software for any additional capabilities require a valid run-time license.
2. Intellectual Property. You acknowledge that no title to the intellectual property in the Software is transferred to you. You further acknowledge that title and full ownership rights to the Software will remain
the exclusive property of TAIS and/or its suppliers, and you will not acquire any rights to the Software, except the license expressly set forth above. You will not remove or change any proprietary notices
contained in or on the Software. The Software is protected under US patent, copyright, trade secret, and/or other proprietary laws, as well as international treaties. Any transfer, use, or copying of the
software in violation of the License Agreement constitutes copyright infringement. You are hereby on notice that any transfer, use, or copying of the Software in violation of this License Agreement constitutes
a willful infringement of copyright.
3. No Reverse Engineering. You agree that you will not attempt, and if you employ employees or engage contractors, you will use your best efforts to prevent your employees and contractors from
attempting to reverse compile, reverse engineer, modify, translate or disassemble the Software in whole or in part. Any failure to comply with the above or any other terms and conditions contained herein
will result in the automatic termination of this license and the reversion of the rights granted hereunder back to TAIS.
4. Limited Warranty. THE SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, TAIS AND ITS SUPPLIERS
DISCLAIM ALL WARRANTIES WITH REGARD TO THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF NON-INFRINGEMENT OF THIRD
PARTY RIGHTS, THE WARRANTY OF YEAR 2000 COMPLIANCE, AND THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. NEITHER TAIS NOR ITS SUPPLIERS WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET
YOUR REQUIREMENTS OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE. HOWEVER, TAIS WARRANTS THAT ANY MEDIA ON WHICH THE
SOFTWARE IS FURNISHED IS FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP UNDER NORMAL USE FOR A PERIOD OF NINETY (90) DAYS FROM THE DATE OF DELIVERY TO
YOU.
5. Limitation Of Liability. TAIS’ ENTIRE LIABILITY AND YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LICENSE AGREEMENT SHALL BE AT TAIS’ OPTION REPLACEMENT OF THE MEDIA OR
REFUND OF THE PRICE PAID. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL TAIS OR ITS SUPPLIERS BE LIABLE TO YOU FOR ANY CONSEQUENTIAL,
SPECIAL, INCIDENTAL OR INDIRECT DAMAGES FOR PERSONAL INJURY, LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION/DATA, OR ANY
OTHER PECUNIARY LOSS OF ANY KIND ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE, EVEN IF TAIS OR ITS SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN NO EVENT SHALL TAIS OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM BY A THIRD PARTY.
6. State/Jurisdiction Laws. SOME STATES/JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY MAY LAST, OR
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO SUCH LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU
SPECIFIC RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE/JURISDICTION TO STATE/JURISDICTION.
7. Export Laws. This License Agreement involves products and/or technical data that may be controlled under the United States Export Administration Regulations and may be subject to the approval of the
United States Department of Commerce prior to export. Any export, directly or indirectly, in contravention of the United States Export Administration Regulations, or any other applicable law, regulation or
order, is prohibited.
8. Governing Law. This License Agreement will be governed by the laws of the State of California, United States of America, excluding its conflict of law provisions.
9. United States Government Restricted Rights. The Software is provided with Restricted Rights. The Software and other materials provided hereunder constitute Commercial Computer Software and
Software Documentation and Technical Data related to Commercial Items. Consistent with F.A.R. 12.211 and 12.212 they are licensed to the U.S. Government under, and the U.S. Government’s rights
therein are restricted pursuant to, the vendor’s commercial license.
10. Severability. If any provision of this License Agreement shall be held to be invalid, illegal or unenforceable, the validity, legality and enforceability of the remaining provisions hereof shall not in any way
be affected or impaired.
11. No Waiver. No waiver of any breach of any provision of this License Agreement shall constitute a waiver of any prior, concurrent or subsequent breach of the same or any other provisions hereof, and no
waiver shall be effective unless made in writing and signed by an authorized representative of the waiving party.
12. Supplier Software. The Software may include certain software provided by TAIS suppliers. In such event, you agree that such supplier may be designated by TAIS as a third party beneficiary of TAIS with
rights to enforce the Agreement with respect to supplier’s software.
YOU ACKNOWLEDGE THAT YOU HAVE READ THIS LICENSE AGREEMENT AND THAT YOU UNDERSTAND ITS PROVISIONS. YOU AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU
FURTHER AGREE THAT THIS LICENSE AGREEMENT CONTAINS THE COMPLETE AND EXCLUSIVE AGREEMENT BETWEEN YOU AND TAIS AND SUPERSEDES ANY PROPOSAL OR PRIOR
AGREEMENT, ORAL OR WRITTEN, OR ANY OTHER COMMUNICATION RELATING TO THE SUBJECT MATTER OF THIS LICENSE AGREEMENT.
Toshiba America Information Systems, Inc.
Telecommunication Systems Division
9740 Irvine Boulevard
Irvine, California 92618-1697
United States of America
DSD 020905
5932
Toshiba America Information Systems, Inc.
Telecommunication Systems Division
End-User Limited Warranty
Toshiba America Information Systems, Inc., (“TAIS”) warrants that this telephone equipment manufactured by
Toshiba (except for fuses, lamps, and other consumables) will, upon delivery by TAIS or an authorized TAIS
dealer to a retail customer in new condition, be free from defects in material and workmanship for twenty-four (24)
months after delivery, except as otherwise provided by TAIS in the TAIS warranty accompanying the products or
posted on TAIS’s website. Products which are not manufactured by Toshiba but are purchased from Toshiba, will
be subject to the warranty provisions provided by the equipment manufacturer, unless TAIS notifies the end-user
of any additional warranty provisions in writing.
This warranty is void (a) if the equipment is used under other than normal use and maintenance conditions, (b) if
the equipment is modified or altered, unless the modification or alteration is expressly authorized by TAIS, (c) if
the equipment is subject to abuse, neglect, lightning, electrical fault, or accident, (d) if the equipment is repaired
by someone other than TAIS or an authorized TAIS dealer, (e) if the equipment’s serial number is defaced or
missing, or (f) if the equipment is installed or used in combination or in assembly with products not supplied by
TAIS and which are not compatible or are of inferior quality, design, or performance.
The sole obligation of TAIS or Toshiba Corporation under this warranty, or under any other legal obligation with
respect to the equipment, is the repair or replacement of such defective or missing parts as are causing the malfunction by TAIS or its authorized dealer with new or refurbished parts (at their option). If TAIS or one of its
authorized dealers does not replace or repair such parts, the retail customer’s sole remedy will be a refund of the
price charged by TAIS to its dealers for such parts as are proven to be defective, and which are returned to TAIS
through one of its authorized dealers within the warranty period and no later than thirty (30) days after such
malfunction, whichever first occurs.
Under no circumstances will the retail customer or any user or dealer or other person be entitled to any direct,
special, indirect, consequential, or exemplary damages, for breach of contract, tort, or otherwise. Under no circumstances will any such person be entitled to any sum greater than the purchase price paid for the item of equipment
that is malfunctioning.
To obtain service under this warranty, the retail customer must bring the malfunction of the machine to the
attention of one of TAIS’ authorized dealers within the applicable warranty period and no later than thirty (30)
days after such malfunction, whichever first occurs. Failure to bring the malfunction to the attention of an
authorized TAIS dealer within the prescribed time results in the customer being not entitled to warranty service.
THERE ARE NO OTHER WARRANTIES FROM EITHER TOSHIBA AMERICA INFORMATION SYSTEMS,
INC., OR TOSHIBA CORPORATION WHICH EXTEND BEYOND THE FACE OF THIS WARRANTY. ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, AND FITNESS FOR USE, ARE EXCLUDED.
No TAIS dealer and no person other than an officer of TAIS may extend or modify this warranty. No such modification or extension is effective unless it is in writing and signed by the Vice President and General Manager,
Telecommunication Systems Division.
WARRANTIES FOR NON-TOSHIBA BRANDED THIRD PARTY PRODUCTS
A valuable element of Toshiba’s product strategy is to offer our customers a complete product
portfolio. To provide this value to our customers at the most optimal prices, we offer both
Toshiba-branded and third-party manufactured products that support our Toshiba Strata CIX
product portfolio. Similar to other resellers of software, hardware and peripherals, these thirdparty manufactured products carry warranties independent of our Toshiba limited warranty
provided with our Toshiba-branded products. Customers should note that third-party
manufacturer warranties vary from product to product and are covered by the warranties
provided through the original manufacturer and passed on intact to the purchaser by Toshiba.
Customers should consult their product documentation for third-party warranty information
specific to third-party products. More information may also b e available in some cases from the
manufacturer’s public website.
While Toshiba offers a wide selection of software, hardware and peripheral products, we do
not specifically test or guarantee that the third-party products we offer work under every
configuration with any or all of the various models of the Toshiba Strata CIX. Toshiba does not
endorse, warrant nor assume any liability in connection with such third party products or
services. If you have questions about compatibility, we recommend and encourage you to
contact the third-party software, hardware and peripheral product manufacturer directly.
This page is intentionally left blank.
Contents
Introduction
Organization...................................................................................................................... vii
How to Use This Guide....................................................................................................viii
Index ....................................................................................................................................123
viStrata CIX DP5000-series Telephone UG 10/10
Introduction
This user guide describes how to use the Toshiba DP5000-series telephones with the
Strata CIX1200, CIX670, CIX200, CIX100, CIX100-S, and CIX40 telephone
systems. These include:
• Strata DP5000-series digital telephones shown in Table 2 on Page 4.
• Strata Digital Add-on Modules.
• Strata Direct Station Selection (DSS) console.
Note T elepho nes and ADM models that include “1” in the model number are models
that support the backlight feature.
Organization
• Chapter 1 – The Gra nd Tour provides an overview DP5000 digital telephones.
• Chapter 2 – The Basics covers the basic telephone functions.
• Chapter 3 – Feature Operations includes an explanation of Soft Key operations,
an alphabetical feature list and LCD information.
• Chapter 4 – AD M/DSS Console explains features and functions of the Add-on
modules.
• Chapter 5 – Headset and Handset Operation explains the interactions of these
accessories with the DP5000-series telephones.
• Chapter 6 – Us er Programming explains how to program the Programmable
Feature Buttons, such as setting One T ouch buttons, changing Personal Speed Dial
numbers, as well as other user programmable functions.
• Chapter 7 – Admi nistrator Programming explains features and functions to be
performed by an Administrator.
Strata CIX DP5000-series Telephone UG 10/10 vii
Introduction
How to Use This Guide
• Appendix A – References includes tables that support procedures in the Basic and
Feature Operation chapters.
• Appendix B – Hardware Connections includes tilt angles and telephone wiring
diagrams.
• Appendix C – Centrex Application describes the Centrex features which may be
available with your Strata CIX system.
How to Use This Guide
This guide provides in-depth instructions for the DP5000-series telephones and their
features. Most telephone users can use the “Strata CIX DP5000-series Quick
Reference Guide” instead of this guide.
Conventions
Note Elaborates specific items or references other information. Within some tables,
general notes apply to the entire table and numbered notes apply to specific
items.
Important!Calls attention to important instructions or information.
CAUTION!Advises you that hardware, software applications, or data could be
damaged if the instructions are not followed closely.
WARNING! Alerts you when the given task could cause personal injury or death.
ConventionsDescription
Represents any Directory Number button, also known as an
[DN]
extension or intercom number.
Telephones can have multiple extensions. Incoming calls
ring extensions bottom to top.
viiiStrata CIX DP5000-series Telephone UG 10/10
ConventionsDescription
Introduction
How to Use This Guide
[PDN]
[SDN]
[PhDN]
Arial Bold
Represents any Primary Directory Number button (the
extension number for the telephone).
Represents any Secondary appearance of a PDN. A PDN
which appears on another telephone is considered an SDN.
Represents any Phantom Directory Number button (an
additional DN).
Represent telephone buttons.
CourierShows a computer keyboard entry or screen display.
ArialRepresents LCD displays, tokens or custom IVR functions.
“Type”Indicates entry of a string of text.
“Press”
Indicates entry of a single key. For example: Type prog
then press Enter.
Shows a multiple PC keyboard or phone button entry. Entries
Plus (+)
without spaces between them show a simultaneous entry.
Example: Esc+ Enter. Entries with spaces between them
show a sequential entry. Example: # 5.
Tilde (~)Means “through.” Example: 350~640 Hz frequency range.
Denotes a procedure.
Denotes the step in a one-step procedure.
Start > Settings >
Printers
See Figure 10
Strata CIX DP5000-series Telephone UG 10/10ix
Denotes a progression of buttons and/or menu options on the
screen you should select.
Grey/Blue words within the printed text denote crossreferences. In the electronic version of this document
(Library CD-ROM or FYI Internet download), crossreferences appear in blue hypertext.
Introduction
Related Documents/Media
Related Documents/Media
Note Some documents listed here may appear in different versions on the
electronically or in print. To find the most current version, check the version/
date in the Publication Information on the back of the document’s title page.
The illustration of the DP5000-series telephone shown below gives a general idea of
the basic attributes found on most of these telephones. The positioning of the buttons
varies per telephone model.
The Grand Tour
Legend
A. Status LED (message and ringing)
B. LCD Display
C. Softkeys
D. Programmable Feature Buttons
E. Message Waiting LED Button
F. Microphone LED Button
Strata CIX DP5000-series Telephone UG 10/105
G. Speaker LED Button
H. Volume
I.Hold Button
J.Microphone
K. Tilt stand
The Grand Tour
DP5000-series Telephone Overview
Fixed Buttons
The fixed buttons on the dial pad help perform standard functions quickly and easily.
Layouts
Fixed buttons are laid out differently on the DP5000-series telephones.
Single Line Telephone9-line LCD Telephone
Fixed buttons are located below the dial pad.
10 and 20 Button 4-line LCD Telephones
Fixed buttons are located on either side of the dial pad.
6Strata CIX DP5000-series Telephone UG 10/10
The Fixed buttons are described below.
Table 3Fixed Button Definitions
ButtonDefinitions
Message (Msg): When Msg LED flashes, press Msg to call back the
station or voice mail device that activated the LED. This is the
telephone’s [PDN] message waiting button.
The Grand Tour
DP5000-series Telephone Overview
Spdial
Redial
Important!
Microphone (Mic/Mute) button toggles between Mic and Mute. When
Mic key is lit, handsfree communication is supported, when Mic is
pressed again and light is off, Mute is enabled on the microp hone in the
telephone and the microphone in the handset.
Speaker: Pre ss to to gg le the spe aker ON/OFF. When red Speaker LED
is lit handsfree communications is supported.
To start a hand sf re e co nv er sa tion ; pr es s the Speaker button, this turns
the red Speaker LED on. To terminate this call press the Spe aker button
again (Speaker LED off).
During a handset conversation, press the Speaker button to start
hands-free communications (red Speaker LED on). Press the Speaker
button again to transfer the conversation back to the handset (Speaker
LED off).
Press and release the volume control bar to adjust volume levels. See
“Volume Control” on page 11.
Important!
Red LED must be on in order for button to function.
Continuously holding the volume button (up or down)
does not change the volume. It is adjusted on a per
press basis.
Press Spdial and enter 3-digit Speed dial access code. Speed dial
access codes must be setup before they can be accessed. See “Speed
Dial” on page 62.
Press Redial to dial the last telephone number called (internal or
external).
If you have Automatic Line Selection, lift the handset first.
Strata CIX DP5000-series Telephone UG 10/107
The Grand Tour
Programmable Feature Button
Layout
01
02
03
04
05
06
07
08
09
10
11
12
14
15
16
17
18
19
20
13
DP5000-series Telephone Overview
Table 3Fixed Button Definitions (continued)
ButtonDefinitions
Press Cnf/Trn to add internal or external parties to a conference call (up
Cnf/Trn
(Conference/Transfer)
to 8 parties).
Press
Cnf/Trn and enter a number to transfer a call to another pa rty (on
the CIX system).
Press Hold to place an internal or external call on hold.
Press
Hold
Hold Hold to place an internal or external call o n Exclusive hold .
If your telephone is programmed for Automatic Hold, existing calls are
automatically placed on hold when you answer a call or make another
call.
Programmable Feature Buttons
Programmable Feature Buttons are programmed
by the System Administrator and can be
customized on a per user basis.
See Table 17 on page 112 for a list of
Programmable Feature Buttons.
Note Programmable Feature Buttons are
numbered bottom to top, left to right
(shown right).
8Strata CIX DP5000-series Telephone UG 10/10
Key Strip
The key strips on the DP5000-series telephones
and add-on modules are either electronic
(programmable) or paper (refer to
Table 2).
Table 1 and
LCD
Shift Button – toggles
between Programmable
Feature Buttons 1~10
and 11~20.
Hist Button – Press Hist
button when phone is
idle to access Caller ID
history.
If your telephone has an LCD, use this section to learn more about its functions.
9-Line LCD Display
The LCD on the 9-Line LCD telephone (shown below) in idle state shows:
Top to Bottom
Line 1 or the top line of the LCD will display your user name (if programmed) and
your extension number.
Line 2 will show the Date and time.
Line 3 will show information related to your telephone set: VM New/Saved messages,
Call Forward, or if a certain feature is enabled on your telephone set.
A plus sign + on the LCD indicates there is more data to display. Press SCRL to
advance through the information.
Lines 4~8 will indicate Programmable Feature Button labels.
Line 9 will display the Soft Keys (See “Soft Keys” on page 10).
The Grand Tour
LCD
Strata CIX DP5000-series Telephone UG 10/109
The Grand Tour
DP5000 4-line LCD display in Idle Mode
SK1SK2SK3SK4
Soft Keys
4-Line LCD Display
The LCD in it's idle state (shown right)
displays:
Line 1 or the top line of the LCD will
display your user name (if
programmed) and your extension
number.
Line 2 will show the Date and time.
Line 3 will show information related to
your telephone set: VM New/Saved
messages, Call Forward, or if a certain
feature is enabled on your telephone
set.
A plus sign + on the LCD indicates there is more data to display. Press NEXT to
advance through the information.
Line 4 will display the soft keys available in idle state. Press DSPLY to switch from
the Call Forward display to the User Name display.
Soft Keys
Softkeys (SK1 - SK4) refer to the four
buttons directly below the LCD screen
(shown right). Soft Keys dynamically
change their functions and label
depending on the state of the telephone.
The dynamic feature associated with the
Soft Key is displayed on the bottom line
of the LCD display directly above each
Soft Key button.
10Strata CIX DP5000-series Telephone UG 10/10
The Basics2
This chapter reviews the basic operations of the DP5000-series telephones. The
instructions apply to all telephone models, except when noted otherwise.
Customizing Your Telephone
Volume Control
Note The Volume Control instructions for the Single Line Telephone are on the next
page.
To adjust the handset volume
Press the
When you hang up, the volume returns to the default setting.
Volto increase volume and Vol to decrease volume during the call.
To adjust the speaker volume for internal/external calls and background music
1. Press
2. Press an extension button - you hear dial tone.
3. Press the
To adjust Ring Tone, Hands free Answerback and Speaker Off-hook Call
Announce
Make sure the telephone is idle and the handset is on-hook. Press the
Strata CIX DP5000-series Telephone UG 10/1011
Spkr.
Vol to increase volume and Vol to decrease volume. This volume
setting applies to all calls until changed.
Vol to
increase volume and
telephone’s ring tone, Hands free Answerback and Speaker Off-hook Call
Announce simultaneously.
Vol to decrease volume. This adjusts volume for your
The Basics
Customizing Your Telephone
To adjust handset Beep Tone
1. With the handset off-hook, dial the Beep Tone Adjustment Code
#6101 (default
code). You hear busy tone.
2. Press
Vol or Vol to reach the desired level.
Volume Control for the Single Line Telephone
Press the Vol to increase volume and Vol to decrease volume during it.
To adjust the handset volume
Press the
When you hang up, the volume returns to the default setting.
To adjust the speaker volume for internal/external calls and background music
1. Press
2. Press an extension button - you hear dial tone.
3. Press the
setting applies to all calls until changed.
Vol to increase volume and Vol to decrease volume during the call.
Spkr.
Vol to increase volume and Vol to decrease volume. This volume
To adjust Ring Tone
Make sure the telephone is idle and the handset is on-hook. Press the Vol s to
increase volume and Vol t to decrease volume.
12Strata CIX DP5000-series Telephone UG 10/10
Customizing Your Telephone
LCD Contrast
Available on backlit telephones and backlit add-on module.
To adjust the LCD contrast on the backlit telephones
1. Press and hold down the
2. Press and release
Note Holding the Vol button does not continue to change the setting. The button must
Vol or Vol repeatedly.
be pressed for each step of contrast change.
To adjust the LCD contrast on the Add-on Module
Mic button.
The Basics
1. Press
2. Press
3. Press
Hold+3+6+9 (simultaneously).
Contrast + button to increase contrast.
Contrast - button to decrease contrast.
4. Lift the handset off-hook / on-hook to save settings.
Note Holding the softkey does not continue to change the setting. The softkey must
be pressed for each step of contrast change
Brightness Control
Available on backlit telephones and backlit add-on module.
To change the LCD back light brightness
1. Press
2. Press
3. Press
4. Lift the handset off-hook / on-hook to save the settings.
Note Use the Bright and Dim buttons in steps 2 and 3 on the 10 button LCD Add-on
Hold+3+6+9 (simultaneously).
Bright softkey to increase brightness.
Dim softkey to decrease brightness.
Module.
Strata CIX DP5000-series Telephone UG 10/1013
The Basics
Customizing Your Telephone
Backlight On/Off
Available on backlit telephones and backlit add-on module.