Toshiba DLVM-GL, DLVM-GC User Manual

Product Brief
TC90407XBG Reference Modules
Highlights
•ATSC digital TV modules to convert analog CRT and LCD TV to be ATSC compliant per the FCC mandate.
• Field proven and mature ATSC software is provided.
• Protocol for interfacing to the TV micro is provided.
• Modules are compliance CE tested with Sarnoff streams and audio is Dolby certified
Description
Toshiba has designed two application­specific modules based on the TC90407XBG digital TV SoC that can reduce design-to-production time:
– DLVM-GC – DLVM-GL The DLVM-GC module is designed for
digital CRT TV applications and the DLVM­GL module is designed for LCD TV applications. Both modules decode digital transmission content and provide analog or digital output to existing backend processors in TV systems that decode analog transmissions for display. The DLVM-GC module can be plugged into an existing analog CRT chassis or mother­board through a connector. Similarly, the DLVM-GL module can be plugged into an
TC90407XBG Reference Modules
1
existing LCD TV backend processor system that decodes analog transmission for display.
Features
Hardware Structure: The block diagram of the DLVM-GC module is based on the Toshiba TC90407XBG digital TV SoC. The digital tuner IF output is connected to the VSB demodulator input of the TC90407XBG chip on the module. The DLVM-GC can decode HD or SD stream and provide analog output in 480i format (CVBS, S-Video or Component Video) for digital CRTTV applications. It can also provide component analog output in 480p/720p/1080i format. This module generates analog stereo audio output and digital audio output (SPDIF). The DLVM-GC module design can also be used for digital converter box applications.
www.Toshiba.com/taec
TC90407XBG/FG Block Diagram
NOR-Flash
Debug Port
Data
DDR
SDRAM
256 Mbit
2.5V 5.0V
2.5V
LDO
1.5V
Address
Control
1.5V
2-4 MB
Address
TC90407XBG
2
CUART
I
Data
IFAGC
Connector
Audio
DAC
LDO
3.3V
LDO
3.3V
TC90407XBG Reference Modules
TAEC Regional Sales Offices
NORTHWEST
San Jose, CA
TEL: (408) 526-2400 FAX: (408) 526-2410
Portland, OR
TEL: (503) 784-8879 FAX: (503) 466-9729
SOUTHWEST
Irvine, CA
TEL: (949) 623-2900 FAX: (949) 474-1330
Richardson, TX
TEL: (972) 480-0470 FAX: (972) 235-4114
CENTRAL
Buffalo Grove, IL
TEL: (847) 484-2400 FAX: (847) 541-7287
NORTHEAST
Marlboro, MA
TEL: (508) 481-0034 FAX: (508) 481-8828
Parsippany, NJ
TEL: (973) 541-4715 FAX: (973) 541-4716
SOUTHEAST
Duluth, GA
TEL: (770) 931-3363 FAX: (770) 931-7602
* The information contained herein is subject to change without notice. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any
infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others.
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due
to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situation in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
* The Toshiba products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment,
measuring equipment, industrial robotics, domestic appliances, etc.). These Toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc. Unintended Usage of Toshiba products listed in this document shall be
made at the customer’s own risk. * The products described in this document may include products subject to foreign exchange and foreign trade laws. * The products contained herein may also be controlled under the U.S. Export Administration Regulations and/or subject to the approval of the U.S. Department of
Commerce or U.S. Department of State prior to export. Any export or re-export, directly or indirectly in contravention of any of the applicable export laws and
regulations, is hereby prohibited.
All trademarks are of their respective manufacturer and may be registered in certain jurisdictions. © Copyright 12/2006 TAEC
Product Brief
The DLVM-GL module is very similar to the DLVM-GC module, and in addition to the above functionality, it provides 8/16-bit digital video output to interface to a LCD TV chip that accepts digital video. It also provides 1 channel of I2S digital output.
Software Structure: These modules use a software stack as shown in the diagram below. The firmware and device drivers are ported for a Linux®operating system.
Toshiba’s industry-proven ATSC middle­ware, driver and application adaptation layer software along with sample application code are available for quick product deployment. The software stack
www.Toshiba.com/taec
Software Structure for an ATSC Digital TV Application
Applications
Channel Management Channel Information Parental Control Closed Caption Service
API API
Tuner
Engine
+
Font
LLDD API
OSD Low Device Driver
Transport Demux,
Video, Audio
Firmware API
Transport Demux,
Video, Audio
Analog TV
Communication
Interface
Tuner
Terrestrial Cable
Font Customer Preference
Interface
I
2
C
UART
OSD Graphic Windows & Composition
Closed
Caption
608/708–B
Parental
Control
PSIP AV Decode
Demux Video Audio
Optional
Components API
API
Monta
Vista
Linux
can upgrade an existing NTSC LCD/CRT TV chassis to be ATSC compliant. The interface between analog TV and an ATSC module, over a UART or I2C bus, can be easily customized by the system integrator or ODM. The Software Kit also comes with complete documentation of the API and sample code for easy integration with an analog TV chassis. The Software Kit comes with a font engine and fonts, which can be replaced by the user if different fonts are required. Similarly, the tuner driver can also be replaced for a different tuner. The software has gone through extensive qualification including Dolby certification and is Sarnoff compliant.
Loading...