Toshiba CF36H50, CF32H50 Owner’s Manual

TOSHIBA

Color Television

CF27H50/CF32H50/CF36H50

I I I I

OWNER'S MANUAL

_TOSHIBA CORPORATION, 1998

Dear Customer

Congratulations! You have purchas, ed one oT me finest Color TV's.on the market!

Thismanual willhelp'yo'O-O_e the-m-a-fly exciting and

useful features to make-your TV viewing more enjoy- able than ever before. Before o_erating your_ Set_ p/ease read all these

safety and operating instructions completely and then retain for future reference.

Safety Precautions

Customer's Record You will find the model number and serial number on

the back of your TV set.

Record these numbers in the spaces provided below. Refer to them whenever you call upon your TOSHIBA

dealer regarding this product.

Model Number Serial Number

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

AVIS: RISQUE DE CHOC

ELECTRIOUE-NE PAS OUVRIR

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PER- SONNEL.

The lightning symbol in the triangle tells you that the voltage inside this product may be strong enough to cause an electric shock. DO NOT TRY TO SERVICE THIS PRODUCT

YOURSELF. The exclamation point in the triangle tells

you that important operating and mainte- nance instructions follow this symbol.

This "IV set may be used only with TOSHIBA stand shown _rnpage 36. Use with other stands may

result in instability causing possible injury.

CAUTIONS:

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS

POLARIZED PLUG WITH AN EXTENSION CORD

RECEPTACLE OR OTHER OUTLET UNLESS THE PRONGS CANBE FULLY INSERTED INTO THE

OUTLET TO PREVENT ANY EXPOSURE OF THE

PRONGS ON THE POLARIZED PLUG.

ATTENTION:

POUR PRI_VENIR LES CHOCS I_LECTRIQUES, NE PAS UTILISER CE'I-rE FICHE POLARISI_E AVEC UN

PROLONGATEUR, UNE PRISE DE COURANT OU

UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT I_TRE INSI_RFtS)kFOND SANS

EN LAISSER AUCUNE PARTIE A DleCOUVERT.

Avoid displaying stationary images on your TV screen for extended periods of time. Stationary patterns generated by PIP display, computer displays, video

games, stock market reports, etc. can become perma- nently engrained on the picture tube. This damage is

not protected by your warranty as it is the result of

misuse. Should you wish to use your TOSHIBA Tel- evision to display still images, it is always advisable to reduce brightness and contrast settings. Never leave a PIPdisplay, a computer or video game display

unattended.

NOTE TO CATV SYSTEM INSTALLER IN THE USA:

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be

connected to the grounding system of the building,

as close to the point of cable entry as practical.

Table of Contents

Set Up

Introduction ....................................................... 4

Installing Your rv ............................... ............... 4

Antenna/Cable "IV Connection ......................... 5

Preparation_ l--

Location of Controls ('IV Set) ........................... 7

Location of Controls (Remote Control) ........... 8

Before Using the Remote Control .................... 9

Using the Remote with VCR or Cable TV

Converter ....................................................... 10

Programming the Remote Control ................ 11

Menu Function (General Instructions) ........... 14

Programming Channel Memory .................... 15

Basic Operation

Watching TV Programs ................................... 17

Convenient Remote Functions ....................... 18

Advanced Operation

Watching Picture-in-Picture ............................ 24

Operating Closed Captioning Feature ........... 26

Locking Channels ............................................ 28

Programming Your Favorite Channels .......... 30

Changing On-Screen Display Language ....... 31

Equipment Connections

Connecting a Standard VCR ........................... 32

Connecting a VCR with an S-Video Jack ....... 33

Dubbing/Editing Video Tapes Using 2 VCR's ... 34

Reference Section

Cleaning and Care ........................................... 35

Specifications .................................................. 36

Before Calling Service Personnel .................. 37

Limited United States Warranty .................... 38

Setting the Off-Timer (Sleep Timer) .............. 19

Adjusting the Picture ...................................... 20

Adjusting the Sound ....................................... 22

Introduction

This manual applies to models CF27H50, CF32H50 and CF36H50, and there are slight differences among them. The front and rear panel illustrations in the text are based on CF32H50. Check the model of your TV before using this manual.

Installing your TV

Where to install

Place the TV on the floor or on a sturdy platform.

The mounting surface should be flat and steady.

Lighting Do not place the TV in a room where direct lighting

strikes the screen, Use soft and indirect lighting.

Air circulation

Place the "IV far enough from the walls to allow proper ventilation. This will prevent the TV from

overheating and avoid possible damage to the TV. Avoid dusty places too.

Power supply Plug into an electrical outlet with standard house-

hold power (120 volt AC, 60Hz). Do not change the plug's safety prong. See the right column.

WARNING : TO AVOID PERSONAL INJURY

• Do not stand or climb on the TV.

• Do not put a VCR or any heavy object on top of

the TV.

CAUTION : As a safety feature, the plug has one prong wider

than the other. It will fit only one way into a stand- ard electrical outlet. If the plug will not fit into the outlet, try turning it around. If the plug will not fit either way, the outlet is probably old and non-

standard. You will need to have a new outlet

installed by an

electrician.

DO NOT CHANGE

THE SAFETY

FEATURE OF THE

PLUG.

Wide prong

Antenna/Cable TV Connection

You can use either an indoor or outdoor antenna to receive VHF and/or UHF channels. Channels 2 - 13 are VHF channels, and channels 14 - 69 are UHF channels.

We recommend using an outdoor antenna for better picture quality. You can receive Cable "IV by connecting a cable supplied by your local cable company.

VHF,

UHF

or Cable

75-ohm coaxial cable

300-ohm twin-lead cable

Antenna adapter

(Not supplied)

F-type connector

(Not supplied)

Back of TV

IIIlUlHIIMIIIIIIIIIlll

e'-

€ t-

> I"

€

t,,

ANT

(75Q)

Cable lead-in

IN OUT

Cable TV converter/ decoder

Notes:

• You can select scrambled or unscrambled channels via the converter/decoder box by using the converter's channel keys, Place y_ur "IV on channel 3 or 4 to match the converter's output channel.

• The dec_ding device may or may not be a part of the cable converter.

Antenna/Cable TV Connection (Continued)

After ANTENNA/CABLE connections are made, you are still required to connect the VCR using VIDEO/AUDIO connecting cables for playback of good quality from the VCR. See page 32.

ANT

(75D)

Antenna or Cable lead-in

AUTO v I OEO

ROUTL OUT

@@@

VCR

Note: Tape playback may often cause the VCR to interrupt antenna signal to the TV. If you cannot select a certain

channel, try pressing the FV/VCR button on the Remote Control.

*A/B switch

lead-in signal Cable I_ 2-way

Cable TV converter/ IN decoder

splitter

OUT

VCR

Note: "A" position on the A/B switch (*) allows you to select unscrambled channels using the TV's channel keys.

"B" position on the A/B Switch allows you to select scrambled channels via the cable TV converter/decoder using

the converter's channel keys. Place your TV and VCR on channel 3 or 4 to match the converter's output channel.

Location of Controls (TV Set)

For specific use of each control, consult the corresponding page numbers in brackets.

Front view Rear view

-I'V/VIDEO button [32]

VOLUME 4 / • buttons* [17]

_ CHANNEL _'/A buttons* _

_1/_/_'/& POWER button [171 buttons [141

VIDEO/AUDIO terminals [32]

Remote sensor

€

m o

=.o

(Jo

c o

*Dual fuctien I_ttons

MENU button [14]

POWER indicator

Location of Controls (Remote Control)

Only the buttons that are used to operate the "IV set are described here. For details on the use of each control, refer to pages in brackets.

Aim at the remote sensor on the TV

MUTE button [18]

RECALL button [18]

CHANNEL &J • buttons [17] menu _ • buttons [14]

TVICABLEIVCR switch

Set to "'IV" to control the "IV.

FAV •/• button [30]

POWERbutton [15,17]

Channel Number buttons [16,17]

CH R'I'N button [18]

MENU button [14]

VOLUME <l/b buttons [17]

menu </1_ buttons [14]

SURROUND button [23]

I'V/VIDEO button [32]

PIP functions [24]

Before Using the Remote Control

With this Remote Control, you can operate your TV and

most models of remote-controlled VCR's and Cable TV

converters even if they are different brands.

However, this Remote Control must first be programmed

to control other brands of VCR's and/or Converters. If

you will be L_sing=_our TV set with a TOSHIBA VCR, your

Remote has already been preprogrammed for you.

• Before attempting to operate your Remote Control, install the batteries according to the section "To install batteries" shown below.

• For more detailed instructions, see the section "Pro- gramming the Remote Control" on page 11.

Place the Remote Control with the face down. Press down on the ridged area of the battery cover and

slide it off.

Press and slide to remove.

Notes:

• After installing new batteries, the Remote Control will

set itself to the codes for TOSHIBA's "IV and VCR. If you are using the Remote Control to operate equip-

ment that uses different codes, it will have to be

reprogrammed for tho.se codes.

• This Remote Control may have functions not available

on the original remote controller.

• These functions may or may not operate your VCR or Cable "IV Converter. Refer to the owner's manuals

supplied with the equipment to see which functions are available.

• The remote controller supplied with your VCR or cable TV converter may have keys not duplicated on this

Remote Control. If these functions are desired, the original remote controller will have to be used.

CAUTION:

• Do not throw your batteries into a fire. Dispose of your

batteries in a designated disposal area.

• Do not combine used old batteries with new ones.

• Do not mix battery types.

Place two "AA" size batteries, matching the + and - signs on each battery to the + and - signs of the battery compartment.

Replace the battery cover until the lock snaps.

Tips for Best Operation

• For optimum performance, aim the Remote Control

directly at the TV from a distance of no more than 16 ft (5m) and be sure there is no obstruction between the

Remote Control and the TV.

• If your Remote Control does not always adjust the TV

as you wish, you probably need to replace the batteries.

• Remove dead batteries immediately to prevent baftery acid from leaking into the battery compartment.

• If you do not intend to use the Remote Control for a long period, remove the batteries.

--I

€

Using the Remote with VCR or Cable TV Converter.

• To control a TOSHIBA VCR, first set the TV/CABLENCR switch to "VCR" position. The buttons shown below will t]_-n-

control the VCR. The rest of the buttons operate the TV as usual.

If you have another brand of VCR, you can probably program your Remote to control it. Details are on page 11.

• To control a cable TV converter, this Remote Control must be programmed to recognize the brand of your converter.

See page 11. The shaded buttons can be used to control the cable TV converter.

Set the TV/CABLENCR switch to "CABLE" position whenever you control the cable TV converter.

Aim at the VCR or cable TV converter

B / I

POWER button Press the button to turn the VCR (or converter) on.

Press again to turn off.

Channel Number buttons Press the numbers

desired for direct access.

"CABLE": To control the

TV/CABLE/VCR switch

"VCR": To control the VCR

TV/VCR button

Press to select the TV mode to view one program while

recording another program.

REC(record) button Press to start recording.

SLOW button Press to view a slow-motion

picture in playback mode.

cable TV converter

"':1

ENTER button Some VCR's and cable TV

converters require "ENT" to change channel numbers.

CHANNEL • / • button

Press • to select next higher

channel.

Press • to select next lower channel.

STOP button Press to stop the tape.

PLAY Press to begin tape playback.

FF (fast forward) button

Press to rapidly advance the tape.

In playback mode, press to view

the picture moving rapidly in forward direction.

PAUSE button

"Press tO freeze the picture

during playback or recording.

Press again to release.

-- REW (rewind) button Press to rewind the tape.

In playback mode, press to view picture moving rapidly in

reverse.

Programming the Remote Control

• This Remote Control is preprogrammed to operate TOSHIBA VCR's.

• To use VCR's other than Toshiba models (or cable converter), perform the following procedures before operating.

1 Refer to the _VCR code table" (or "Cable TV converter code table')

on pages 12 and 13 to find the code number that corresponds to the

brand name of your VCR (or converter).

If more than one number is listed, try each one separately until you

find the one that works.

2 Set the TV/CABLE/VCR switch to "VCR" (or "CABLE").

Hold down RECALL while pressing the Number buttons for the three digit code number for your brand of VCR (or converter).

Point the Remote Control at the VCR (or at the converter) and press POWER to test the code number.

-If the right number was entered, the VCR (or the converter) should turn off.

-If the VCR (or the converter) does not respond to the Remote

Control, repeat steps 1 to 4 with another code number.

Notes:

• You have to reprogram the Remote Control when you change its

batteries.

• Some newer VCR's are capable of working on either of two remote

codes. These VCR's have a switch labeled "VCR1/VCR2".

If your VCR has this kind of switch, and does not respond to all.the

code numbers for your VCR brand name, set the switch to another

position ("VCRI" or "VCR2") and reprogram the Remote Control.

ICR

STILL SOURCE PIP

SLOW PAUSE REW FF

r-_ QD 1_53CSD

LOCATE SWAP

TOSHIBA

RECALL

Number

E E

II1

Forfuturere_rence, writethecode

you used.

VCR CODE:

CABLE CODE:

.,Q

€-

" 11

Programming the Remote Control (Continued)

• in some rare cases, you may not be able to operate your non-Toshiba equipment with the supplied Remote Control. This is because your equipment may use a code that is not provided with this Remote Control. In this case,

please use the equipment's own remote control.

VCR code table

BRAND NAME CODE NUMBER

- - lm_

Adventura .............. 019

Aiko ......................... 297

Aiwa ........................ 019

Akai ......................... 060,068,080,125,

261

American High ....... 054

Asha ........................ 259

Audiovox ................ 056

Beaumark ............... 259

Bell & Howell ......... 123

Brandt ..................... 206

Broksonic ............... 140,203,230,314,

380

Calix ........................ 056

Canon ..................... 054

Capeheart ............... 039

Carver ..................... 100

CCE ......................... 091,297

Citizen ..................... 056,297

Colt ......................... 091

Craig ....................... 056,066,091,259

Curtis Mathes ......... 054,060,079

Cybernex ................ 259

Daewoo .................. 039,064,297

Daytron ................... 039

Dynatech ................ 019

Electrohome ........... 056

Electrophonic ......... 056

Emerex ................... 051

Emerson ................. 019,021,056,062,

080,087,140,203,

227,228,230,231, 297,313,314,380,

498

Fisher ...................... 066,073,085,123

Fuji .......................... 052,054

Funai ....................... 019,344

Garrard ................... 019,344

GE ........................... 054,079,084,221

GoldStar ................. 037,056,057

Gradiente ............... 019

Harley Davidson .... 019

Harman/Kardon ..... 057,094

Harwood ................. 087,091

Headquarter ........... 065

HI-Q ......................... 066

Hitachi .................... 060,061,084,124,

185,254

Jensen .................... 060

JVC ........;; .............. 027,060,086

Kenvv_od ................ 057,060,086

KLH ......................... 091

Kodak ...................... 054,056

Lloyd ....................... 019

BRAND NAME CODE NUMBER

Lloyd's .................... 227

L;ogik ....................... 091

LXI ........................... 056

Magnavox .............. 054,058,100,129,

168

Magnin ................... 259

Marantz .................. 054,100

Marta ...................... 056

Matsushita ............. 054

MEI .......................... 054

Memorex ................ 019,054,056,058,

065,066,067,123, 259

M GA ....................... 062,080

MGN Technology .. 259

Minolta ................... 061,124

Mitsubishi .............. 062,080,086,094,

192,233,261

Motorola ................. 054,067

MTC ........................ 019,259

Multitech ................ 019,091

NAD ........................ 077

NEC ......................... 057,059,060,069,

086

Nikko ....................... 056

Noblex .................... 259

Olympus ................. 054

Optimus .................. 056,067,077,123

Optonica ................. 081

Orion ....................... 498

Panasonic ............... 054,096,181,244,

473

Penney .................... 054,056,057,059,

061,073,259

Pentax ..................... 061,084,124

Philco ...................... 054

Philips ..................... 054,081,100,129

Pilot ......................... 056

Pioneer ................... 077,086

Portland .................. 039

Protec ..................... 091

Pulsar ...................... 058

Quarter ................... 065

Quartz ..................... 065

Quasar .................... 054,096

Radio Shack ........... 019,056,344

Radix ....................... 056

Randex ................... 056

RCA ......................... 061,079,084,096,

124,125,168,221

Realistic .................. 019,054,056,065,

066,067,081,085,

123,259

Ricoh ....................... 053

BRAND NAME CODE NUMBER

Runco ..................... 058

Samsung ................ 064,259

Sanky ...................... 058,067

Sansui ..................... 060,086

Sanyo ..................... 065,066,123,259

Scott ....................... 062,064,140,203,

229,230,231

Sears ....................... 054,056,061,065,

066,073,085,123,

124

Sharp ...................... 067,081

Shintom .................. 091

Shogun ................... 259

Singer ..................... 091

Sony ....................... 051,052,053,054

STS ......................... 061

Sylvania .................. 019,054,062,100,

129

Symphonic ............. 019,344

Tatung .................... 060

Teac ........................ 019,060

Technics ................. 054,181

Teknika ................... 019,054,056,071

Telefunken ............. 20.6

TMK ........................ 227,259

Toshiba ................... 062,064,085,229,

231,385

Totevision .............. 056,259

Unitech ................... 259

Vector ..................... 064

Vector Research ..... 057,059

Video Concepts ...... 059,064,080

Videosonic ............. 259 '

Wards ..................... 019,054,061,066,

067,081,091,168, 231,259

XR-1000 .................. 019,054,091

Yamaha .................. 057

Zenith ..................... 052,053,058

+ 28 hidden pages