Toshiba C650, C650D User Manual

User’s Manual

Satellite C650/C650D Satellite Pro C650/C650D Series

Copyright

Disclaimer

© 2010 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.

TOSHIBA Satellite C650/Satellite C650D/Satellite Pro C650/Satellite Pro C650D Series Portable Personal Computer User’s Manual

First edition April 2010 Copyright authority for music, movies, computer programs, data bases and

other intellectual property covered by copyright laws belongs to the author or to the copyright owner. Copyrighted material can be reproduced only for personal use or use within the home. Any other use beyond that stipulated above (including conversion to digital format, alteration, transfer of copied material and distribution on a network) without the permission of the copyright owner is a violation of copyright or author’s rights and is subject to civil damages or criminal action. Please comply with copyright laws in making any reproduction from this manual.

This manual has been validated and reviewed for accuracy. The instructions and descriptions it contains are accurate for the TOSHIBA Satellite C650/Satellite C650D/Satellite Pro C650/Satellite Pro C650D Series Portable Personal Computer at the time of this manual’s production. However, succeeding computers and manuals are subject to change without notice. TOSHIBA assumes no liability for damages incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manual.

Trademarks

IBM is a registered trademark, and IBM PC and PS/2 are trademarks of International Business Machines Corporation. Intel, Intel SpeedStep and Intel Core and Centrino are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries/regions. AMD, the AMD Arrow logo, AMD Athlon, AMD Turion, Radeon, and combinations thereof, ATI Mobility Radeon™ are trademarks of Advanced Micro Devices, Inc. Windows tion. Photo CD is a trademark of Eastman Kodak.

ConfigFree is a trademark of Toshiba Corporation. Wi-Fi is a registered trademark of the Wi-Fi Alliance.

User’s Manual i

and Microsoft are registered trademarks of Microsoft Corpora-

Secure Digital and SD are trademarks of SD Card Association. MultiMediaCard and MMC are trademarks of MultiMediaCard Association.

Labelflash™ is a trademark of YAMAHA CORPORATION. Other trademarks and registered trademarks not listed above may be used

in this manual.

Safety Instructions

Use the following safety guidelines to help to protect yourself and your computer.

When Using Your Computer

Do not operate your portable computer for an extended period of time with the base resting directly on your body. With extended operation, heat can potentially build up in the base. Allowing sustained contact with the skin could cause discomfort or, eventually, a burn

■ Do not attempt to service the computer yourself. Always follow

installation instructions closely.

■ Do not carry a battery in your pocket, purse, or other container where

metal objects (such as car keys) could short-circuit the battery terminals. The resulting excessive current follow can cause extremely high temperatures and may result in damage from burns.

■ Be sure that nothing rests on your AC adaptor’s power cable and that

the cable is not located where it can be tripped over or stepped on.

■ Place the AC adaptor in a ventilated area, such as a desk top or on the

floor, when you use it to run the computer or to charge the battery. Do not cover the AC adaptor with papers or other items that will reduce cooling; also, do not use the AC adaptor while it is inside a carrying case.

■ Use only the AC adaptor and batteries that are approved for use with

this computer. Use of another type of battery or AC adaptor may risk fire or explosion.

■ Before you connect the computer to a power source, ensure that the

voltage rating of the AC adaptor matches that of the available power source. 115 V/60 Hz in most of North and South America and some Far Eastern countries such as Taiwan. 100 V/50 Hz in eastern Japan and 100 V/60 Hz in western Japan. 230 V/50 Hz in most of Europe, the Middle East, and the Far East.

■ If you use an extension cable with your AC adaptor, ensure that the total

ampere rating of the products plugged in to the extension cable does not exceed the ampere rating of the extension cable.

■ To remove power from the computer, turn it off, remove the battery, and

disconnect the AC adaptor from the electrical outlet.

■ To help avoid the potential hazard of electric shock, do not connect or

disconnect any cables or perform maintenance or reconfiguration of this product during an electrical storm.

■ When setting up the computer for work, place it on a level surface.

User’s Manual ii

FCC Information

FCC Notice “Declaration of Conformity Information”

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

■ Reorient or relocate the receiving antenna.

■ Increase the separation between the equipment and receiver.

■ Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

■ Consult the dealer or an experienced radio/TV technician for help.

Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s external monitor port, USB port, and microphone jack. Changes or modifications made to this equipment, not expressly approved by TOSHIBA or parties authorized by TOSHIBA could void the user’s authority to operate the equipment.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

Contact

Address: TOSHIBA America Information Systems, Inc.

9740 Irvine Boulevard Irvine, California 92618-1697

Telephone: (949) 583-3000

User’s Manual iii

EU Conformity Statement

This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany. The complete and official EU Declaration of Conformity can be found on TOSHIBA’s web site

http://epps.toshiba-teg.com

CE compliance

This product is labelled with the CE Mark in accordance with the related European Directives, notably Electromagnetic Compatibility Directive 2004/108/EC for the notebook and the electronic accessories including the supplied power adapter, the Radio Equipment and Telecommunications Terminal Equipment Directive 1999/5/EC in case of implemented telecommunication accessories and the Low Voltage Directive 2006/95/EC for the supplied power adapter. Furthermore the product complies with the Ecodesign Directive 2009/125/EC (ErP) and its related implementing measures.

This product and the original options are designed to observe the related EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented. In this case the persons who have connected/implemented those options/cables have to provide assurance that the system (PC plus options/cables) still fulfils the required standards. To avoid general EMC problems, the following guidance should be noted:

■ Only CE marked options should be connected/implemented

■ Only best shielded cables should be connected

on the Internet.

Working environment

This product was designed to fulfil the EMC (Electromagnetic Compatibility) requirements to be observed for so-called “Residential, commercial and light industry environments”. TOSHIBA do not approve the use of this product in working environments other than the above mentioned “Residential, commercial and light industry environments”.For example, the following environments are not approved:

■ Industrial Environments (e.g. environments where a mains voltage of

380 V three-phase is used)

■ Medical Environments

■ Automotive Environments

■ Aircraft Environments

User’s Manual iv

Any consequences resulting from the use of this product in working environments that are not approved are not the responsibility of TOSHIBA.The consequences of the use of this product in non-approved working environments may be:

■ Interference with other devices or machines in the near surrounding

area.

■ Malfunction of, or data loss from, this product caused by disturbances

generated by other devices or machines in the near surrounding area.

Therefore TOSHIBA strongly recommend that the electromagnetic compatibility of this product should be suitably tested in all non-approved working environments before use. In the case of automobiles or aircraft, the manufacturer or airline respectively should be asked for permission before use of this product.

Furthermore, for general safety reasons, the use of this product in enviroments with explosive atmospheres is not permitted.

VCCI Class B Information

Canadian Regulatory Information (Canada only)

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulation of the Canadian Department of Communications.

Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causng Equipment Regulations.

Cet appareil numérique de la class B respecte toutes les exgences du Règlement sur le matériel brouileur du Canada.

User’s Manual v

Following Information Is Only Valid for EU-member States

Disposal of Products

The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be separated at the recycling centres.

The black bar indicates that the product was placed on the market after August 13, 2005.

By participating in separate collection of products and batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health.

For more detailed information about the collection and recycling programmes available in your country, please visit our website (http://eu.computers.toshiba-europe.com the shop where you purchased the product.

Disposal of Batteries and/or Accumulators

The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed of separately from household waste.

If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the Battery Directive

Pb, Hg,Cd

(2006/66/EC), then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.

By participating in separate collection of batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health.

) or contact your local city office or

This symbol may not be displayed depending on the country and region where you purchased.

User’s Manual vi

Disposing of the Computer and the Computer's Batteries

■ Discard this computer in accordance with applicable laws and

regulations. For further information, contact your local government.

■ This computer contains rechargeable batteries. After repeated use, the

batteries will finally lose their ability to hold a charge and you will need to replace them. Under certain applicable laws and regulation, it may be illegal to dispose of old batteries by placing them in the trash.

■ Please be kind to our shared environment. Check with your local

government authority for details regarding where to recycle old batteries or how to dispose of them properly. This product contains mercury. Disposal of this material may be regulated due to environmental considerations. For disposal, reuse or recycling information, please contact your local government.

REACH - Compliance Statement

The new European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007. TOSHIBA will meet all REACH requirements and is committed to provide our customers with information about the chemical substances in our products according to REACH regulation.

Please consult the following website

www.toshiba-europe.com/computers/info/reach for information about the

presence in our articles of substances included on the candidate list according to article 59(1) of Regulation (EC) No 1907/2006 (“REACH”) in a concentration above 0.1 % weight by weight.

Following information is only for Turkey

■ Compliant with EEE Regulations: TOSHIBA meets all requirements of

Turkish regulation 26891 °ßRestriction of the use of certain hazardous substances in electrical and electronic equipment.

■ The number of possible pixel failures of your display is defined

according to ISO 13406-2 standards. If the number of pixel failures is less than this standard, they will not be counted as defect or failure.

■ Battery is a consumption product, since the battery time depends on the

usage of your computer. If the battery can not be charged at all, then it is a defect or failure. The changes in battery time is not a defect or failure.

User’s Manual vii

ENERGY STAR® Program

Your computer model may be ENERGY STAR purchased is compliant, it is labeled with the ENERGY STAR logo on the computer and the following information applies.

TOSHIBA is a partner in the ENERGY STAR Program and has designed this computer to meet the latest ENERGY STAR guidelines for energy efficiency. Your computer ships with the power management options preset to a configuration that will provide the most stable operating environment and optimum system performance for both AC power and battery modes.

To conserve energy, your computer is set to enter the low-power Sleep Mode which shuts down the system and display within 15 minutes of inactivity in AC power mode. TOSHIBA recommend that you leave this and other energy saving features active, so that your computer will operate at its maximum energy efficiency. You can wake the computer from Sleep Mode by pressing the power button.

Products that earn the ENERGY STAR prevent greenhouse gas emissions by meeting strict energy efficiency guidelines set by the US EPA and the EU Commission. According to the EPA, a computer meeting the new ENERGY STAR specifications will use between 20% and 50% less energy depending on how it is used.

Visit http://www.eu-energystar.org information regarding the ENERGY STAR Program.

Optical Disc Drive Standards

TOSHIBA Satellite C650/Satellite C650D/Satellite Pro C650/Satellite Pro C650D Series computer is shipped with one of the following drives preinstalled: DVD Super Multi (±R DL) drive or DVD Super Multi (±R DL) /w Label Flash drive.

The drive has one of the following labels:

CLASS 1 LASER PRODUCT LASER KLASSE 1 LUOKAN 1 LASERLAITE APPAREIL A LASER DE CLASSE1 KLASS 1 LASER APPARAT

Before it is shipped, the Class 1 Laser is certified to meet the United States Chapter 21 Standards of the Department of Health and Human Services (DHHS 21 CFR).

For any other country, the drive is certified to meet the Class 1 Laser standards of IEC825 and EN60825.

Compliant. If the model you

or http://www.energystar.gov for more

User’s Manual viii

Optical Disc Drive Safety Instructions

■ The drive employs a laser system. To ensure proper use of this

product, please read this manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.

■ Use of controls, adjustments or the performance of procedures other

than those specified may result in hazardous radiation exposure

■ To prevent direct exposure to the laser beam, do not try to open the

enclosure.

DVD Super Multi (±R DL) Drive

Panasonic System Networks UJ890AD/UJ890ED

Location of the required label

COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.

MANUFACTURED

Panasonic System Networks Co., Ltd. 1-62, 4-Chome Minoshima Hakata-ku Fukuoka, Japan

User’s Manual ix

Toshiba Samsung Storage Technology TS-L633C/TS-L633Y

Location of the required label

PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPLY WITH DHHS RULES 21 CFR CHAPTER 1, SUBCHAPTER J, APPLICABLE AT THE DATE OF MANUFACTURE.

MANUFACTURED

Toshiba Samsung Storage Technology Korea Corporation 14F Digital Empire II, 486 Sin-dong, Youngtong-gu, Suwon-si, Gyeonggi-Do, Korea, 443-734

Hitachi-LG Data Storage GT30N/GT30F

Location of the required label

COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.

MANUFACTURED

Hitachi-LG Data Storage, Inc. 22-23, Kaigan 3-chome, Minato-Ku, Tokyo, 108-0022, Japan

User’s Manual x

TEAC DV-W28S-V

Location of the required label

THIS PRODUCT COMPLIES WITH 21 CFR 1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO LASER NOTICE NO.50. DATED JUNE 24,2007.

MANUFACTURED

TEAC CORPORATION 1-47 OCHIAI, TAMA-SHI, TOKYO, JAPAN

User’s Manual xi

International Precautions

CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.” To prevent direct exposure to the laser beam, do not try to open the enclosure.

VORSICHT: Dieses Gerät enthält ein Laser-System und ist als “LASERSCHUTZKLASSE 1 PRODUKT” klassifiziert. Für den richtigen Gebrauch dieses Modells lesen Sie bitte die Bedienungsanleitung sorgfältig durch und bewahren diese bitte als Referenz auf. Falls Probleme mit diesem Modell auftreten, benachrichtigen Sie bitte die nächste “autorisierte Service-Vertretung”. Um einen direkten Kontakt mit dem Laserstrahl zu vermeiden darf das Gerät nicht geöffnet werden.

User’s Manual xii

ADVARSEL: Denne mærking er anbragt udvendigt på apparatet og indikerer, at apparatet arbejder med laserstråler af klasse 1, hviket betyder, at der anvendes laserstrlier af svageste klasse, og at man ikke på apparatets yderside kan bilve udsat for utilladellg kraftig stråling.

APPARATET BOR KUN ÅBNES AF FAGFOLK MED SÆRLIGT KENDSKAB TIL APPARATER MED LASERSTRÅLER!

Indvendigt i apparatet er anbragt den her gengivne advarselsmækning, som advarer imod at foretage sådanne indgreb i apparatet, at man kan komme til at udsatte sig for laserstråling.

OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1.

VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

VORSICHT: DIE VERWENDUNG VON ANDEREN STEUERUNGEN ODER EINSTELLUNGEN ODER DAS DURCHFÜHREN VON ANDEREN VORGÄNGEN ALS IN DER BEDIENUNGSANLEITUNG BESCHRIEBEN KÖNNEN GEFÄHRLICHE STRAHLENEXPOSITIONEN ZUR FOLGE HABEN.

User’s Manual xiii

Preface

General Precautions

Chapter 1 Getting Started

Equipment Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Connecting the AC Adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Opening The Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Turning On The Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Starting Up for The First Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Turning Off The Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Shut Down Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Sleep Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

Hibernation Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10

Restarting The Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11

System Recovery Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12

System Recovery Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12

System Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13

Creating Recovery Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13

Restoring the pre-installed software from the Recovery hard disk drive

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14

Restoring the pre-installed software from your created Recovery Media

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14

Chapter 2 The Grand Tour

Front with The Display Closed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Left Side. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Right Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Back Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Underside . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Front with The Display Open. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

System Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

User’s Manual xiv

Keyboard Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

Optical Disc Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

Region Codes for DVD Drives and Media . . . . . . . . . . . . . . . . . . . 2-10

Writable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

DVD Super Multi (± R DL) Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-11

AC Adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12

Chapter 3 Hardware, Utilities and Options

Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Processor*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Memory*2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Disks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Keyboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Pointing Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Slots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Multimedia. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Special Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

TOSHIBA Value Added Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

Utilities and Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10

Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

Optional Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

Cards/Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

Power Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13

Peripheral Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13

Other. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13

Bridge Media Slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13

Memory Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14

Media Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15

Inserting a Memory Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16

Removing a Memory Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16

Memory Expansion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17

Installing Memory Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17

Removing Memory Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20

Additional Battery Pack (3 Cell and 6 Cell) . . . . . . . . . . . . . . . . . . . 3-21

Additional AC Adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21

USB FDD Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21

External Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21

Security Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22

User’s Manual xv

Connecting the security lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22

Chapter 4 Operating Basics

Using The Touchpad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Using The Web Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Using TOSHIBA Web Camera Application . . . . . . . . . . . . . . . . . . . . 4-4

Using The TOSHIBA Face Recognition . . . . . . . . . . . . . . . . . . . . . . . 4-5

Note on Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

How to Register The Face Recognition Data . . . . . . . . . . . . . . . . . . 4-6

How to Delete The Face Recognition Data. . . . . . . . . . . . . . . . . . . . 4-7

How to Launch The Help File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

Windows Logon Via TOSHIBA Face Recognition. . . . . . . . . . . . . . . 4-7

Using Optical Disc Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

Loading Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

Removing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-11

Writing CD/DVDs on DVD Super Multi (±R DL) Drive . . . . . . . . . . . 4-12

Important Message (DVD Super Multi (±R DL) Drive) . . . . . . . . . . 4-12

Before Writing or Rewriting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13

When Writing or Rewriting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15

Disclaimer (DVD Super Multi (±R DL) Drive) . . . . . . . . . . . . . . . . . 4-16

TOSHIBA Disc Creator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

Data Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17

How to Learn More about TOSHIBA Disc Creator . . . . . . . . . . . . . 4-17

TOSHIBA DVD PLAYER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18

Notes on Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18

Display Devices & Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19

Starting TOSHIBA DVD PLAYER . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20

Operating TOSHIBA DVD PLAYER . . . . . . . . . . . . . . . . . . . . . . . . 4-20

Open TOSHIBA DVD PLAYER HELP. . . . . . . . . . . . . . . . . . . . . . . 4-20

Media Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21

CD/DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21

Sound System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21

Adjusting System Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21

Changing System Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22

Smart Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22

Using The Microphone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24

Wireless Communications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25

Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25

Wireless Communication Hot key . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26

LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26

LAN Cable Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26

Connecting LAN Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27

Disconnecting LAN Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28

User’s Manual xvi

Cleaning The Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28

Moving The Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28

Heat Dispersal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-29

Chapter 5 The Keyboard

Typewriter Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Function Keys: F1 … F9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Soft Keys: FN Key Combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Hot Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

FN Sticky Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Windows Special Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Generating ASCII Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Chapter 6 Power and Power-up Modes

Power Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

System Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

DC IN/Battery Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Power Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

Battery Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

Real Time Clock Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4

Care and Use of The Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4

Charging The Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

Monitoring Battery Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8

Maximizing Battery Operating Time . . . . . . . . . . . . . . . . . . . . . . . . . 6-9

Retaining Data with Power off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9

Extending Battery Life. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10

Replacing The Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10

Removing The Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-11

Installing The Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12

Starting The Computer by Password . . . . . . . . . . . . . . . . . . . . . . . . 6-13

Power-up Modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13

Windows Utilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13

Hot Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13

Panel Power On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14

System Auto Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14

Chapter 7 HW Setup and Passwords

Accessing HW Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

HW Setup Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

Chapter 8 Troubleshooting

Problem Solving Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

Preliminary Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

Analyzing The Problem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

User’s Manual xvii

Hardware and System Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3

System Start-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3

Self Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4

Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4

Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6

Keyboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6

LCD Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7

Hard Disk Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7

DVD Super Multi(±R DL) Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8

Diskette Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

Pointing Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

Memory cards:Secure Digital (SD), Secure Digital High Capacity (SDHC), Secure Digital Extended Capacity (SDXC) and MultiMediaCard

(MMC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-11

External Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-11

Sound System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12

USB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13

Sleep/Hibernation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13

LAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13

Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14

Recovery Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14

TOSHIBA Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15

Before You Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15

Where to Write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15

Appendix A Specifications

Appendix B Display Controller and Video Mode

Appendix C Wireless LAN

Appendix D AC Power Cord and Connectors

Appendix E Legal Footnotes

Glossary

Index

User’s Manual xviii

Preface

Congratulations on your purchase of the TOSHIBA Satellite C650/Satellite C650D/Satellite Pro C650/Satellite Pro C650D Series computer. This powerful, lightweight notebook computer is designed to provide years of reliable, high-performance computing.

This manual tells you how to set up and begin using your Satellite C650/Satellite C650D/Satellite Pro C650/Satellite Pro C650D Series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.

If you are a new user of computers or if you’re new to portable computing, first read over the Hardware, Utilities and Options and The Grand Tour chapters to familiarize yourself with the computer’s features, components and accessory devices. Then read Getting Started for step-by-step instructions on setting up your computer.

If you are an experienced computer user, please continue reading the preface to learn how this manual is organized, then become acquainted with this manual by browsing through its pages. Be sure to read the Special

Features section of the Introduction, to learn about features that are

uncommon or unique to the computers and carefully read HW Setup and

Passwords. If you are going to install memory cards or connect external

devices such as a printer, be sure to read Chapter 3,Hardware, Utilities and

Options

Manual Contents

This manual is composed of the following chapters, appendixes, a glossary and an index.

Chapter 1, Getting Started, is an overview of the computer’s features, capabilities, and options.

Chapter 2, The Grand Tour, identifies the components of the computer and briefly explains how they function.

Chapter 3, Hardware, Utilities and Options, provides a quick overview of how to begin operating your computer.

Chapter 4, Operating Basics, includes tips on care of the computer and on using the touchpad,optical disc drive, Audio/Video controls, the web camera, the microphone, wireless communication and LAN.

User’s Manual xix

Chapter 5, The Keyboard, describes special keyboard functions such as hot keys.

Chapter 6, Power and Power-up Modes, gives details on the computer’s power resources and battery save modes.

Chapter 7, HW Setup and Passwords, explains how to configure the computer using the HW Setup program. It also tells how to set a password.

Chapter 8, Troubleshooting, provides helpful information on how to perform some diagnostic tests, and suggests courses of action if the computer doesn’t seem to be working properly.

The appendixes provide technical information about your computer. The Glossary defines general computer terminology and includes a list of

acronyms used in the text. The Index quickly directs you to the information contained in this manual.

Conventions

This manual uses the following formats to describe, identify, and highlight terms and operating procedures.

Abbreviations

On first appearance, and whenever necessary for clarity, abbreviations are enclosed in parenthesis following their definition. For example: Read Only Memory (ROM). Acronyms are also defined in the Glossary.

Preface

Icons

Icons identify ports, dials, and other parts of your computer. The indicator panel also uses icons to identify the components it is providing information on.

Keys

The keyboard keys are used in the text to describe many computer operations. A distinctive typeface identifies the key top symbols as they appear on the keyboard. For example, ENTER identifies the Enter key.

Key Operation

Some operations require you to simultaneously use two or more keys. We identify such operations by the key top symbols separated by a plus sign (+). For example, CTRL + C means you must hold down CTRL and at the same time press C. If three keys are used, hold down the first two and at the same time press the third.

ABC When procedures require an action such as clicking an icon

or entering text, the icon’s name or the text you are to type in is represented in the typeface you see to the left.

User’s Manual xx

Display

ABC Names of windows or icons or text generated by the

computer that appear on its display screen are presented in the typeface you see to the left.

Messages

Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below.

Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment.

Please read. A note is a hint or advice that helps you make best use of your equipment.

Indicates a potentially hazardous situation, which could result in death or serious injury if you do not follow instructions.

Terminology

This term is defined in this document as follows:

Preface

Start

User’s Manual xxi

The word “Start” refers to the “ ” button in

Windows

General Precautions

TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer.

Be certain to read the general precautions below and to note the cautions included in the text of the manual.

Provide Adequate Ventilation

■ Always make sure your computer and AC adaptor have adequate

ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep Mode). In this condition, observe the following:

■ Never cover your computer or AC adaptor with any object.

■ Never place your computer or AC adaptor near a heat source, such

as anelectric blanket or heater.

■ Never cover or block the air vents including those located at the

base of the computer.

■ Always operate your computer on a hard flat surface. Using your

computer on a carpet or other soft material can block the vents.

■ Always provide sufficient space around the computer.

■ Overheating your computer or AC adaptor could cause system failure,

computer or AC adaptor damage or a fire, possibly resulting in serious injury.

Creating a Computer-friendly Environment

Place the computer on a flat surface that is large enough for the computer and any other items you are using, such as a printer.

Leave enough space around the computer and other equipment to provide adequate ventilation. Otherwise, they may overheat.

User’s Manual xxii

To keep your computer in prime operating condition, protect your work area from:

■ Dust, moisture, and direct sunlight.

■ Equipment that generates a strong electromagnetic field, such as

■ Rapid changes in temperature or humidity and sources of temperature

■ Extreme heat, cold, or humidity.

■ Liquids and corrosive chemicals.

Stress Injury

Carefully read the Instruction Manual for Safety and Comfort. It contains information on the prevention of stress injuries to your hands and wrists that can be caused by extensive keyboard use. Instruction Manual for Safety and Comfort also includes information on work space design, posture and lighting that can help reduce physical stress.

Heat Injury

■ Avoid prolonged physical contact with the computer. If the computer is

■ If the computer has been used for a long time, avoid direct contact with

■ The surface of the AC adaptor can become hot when in use but this

■ Do not lay the AC adaptor on a material that is sensitive to heat as the

General Precautions

stereo speakers (other than speakers that are connected to the computer) or speakerphones.

change such as air conditioner vents or heaters.

used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury.

the metal plate supporting the various interface ports as this can become hot.

condition does not indicate a malfunction. If you need to transport the AC adaptor, you should disconnect it and let it cool before moving it.

material could become damaged.

Pressure or Impact Damage

Do not apply heavy pressure to the computer or subject it to any form of strong impact as this can damage the computer’s components or otherwise cause it to malfunction.

User’s Manual xxiii

Mobile Phones

Please be aware that the use of mobile phones can interfere with the audio system. The operation of the computer will not be impaired in any way, but it is recommended that a minimum distance of 30cm is maintained between the computer and a mobile phone that is in use.

Instruction Manual for Safety and Comfort

All important information on the safe and proper use of this computer is described in the enclosed Instruction Manual for Safety and Comfort. Be sure to read it before using the computer.

General Precautions

User’s Manual xxiv

Getting Started

This chapter provides an equipment checklist, and it identifies the computer’s features, options and accessories.

Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA.

Equipment Checklist

Carefully unpack your computer. Save the box and packaging materials for future use.

Hardware

Check to make sure you have all the following items:

■ Satellite C650/Satellite C650D/Satellite Pro C650/Satellite Pro C650D

Series Portable Personal Computer

■ Battery pack

■ AC adaptor and power cord (2-pin plug or 3-pin plug)

Chapter 1

Documentation

■ User's Manual

■ Instruction Manual for Safety and Comfort

If any of the items are missing or damaged, contact your dealer immediately.

User’s Manual 1-1

Software

Windows 7

The following software is preinstalled:

■ Windows 7

■ Display Drivers for Windows

■ LAN Driver

■ Pointing Device Driver

■ Sound Driver for Windows

■ Wireless LAN driver

■ TOSHIBA Assist

■ TOSHIBA ConfigFree

■ TOSHIBA Disc Creator

■ TOSHIBA DVD PLAYER (Is preinstalled with some models)

■ TOSHIBA Face Recognition (Is preinstalled with some models)

■ TOSHIBA User’s Manual

■ TOSHIBA Value Added Package

■ TOSHIBA Bulletin Board

■ TOSHIBA ReelTime

■ TOSHIBA Recovery Media Creator

■ TOSHIBA Media Controller

Getting Started

■ All users should be sure to read the section Starting Up for The First

Time.

■ Be sure to read the enclosed Instruction Manual for Safety and Comfort

for information on the safe and proper use of this computer. It is intended to help you be more comfortable and productive while using a notebook computer. By following the recommendations in it you may reduce your chance of developing a painful or disabling injury to your hand, arms, shoulders or neck.

This chapter provides basic information to start using your computer. It covers the following topics:

■ Connecting the AC adaptor

■ Opening the display

■ Turning on the power

■ Starting up for the first time

■ Turning off the power

■ Restarting the computer

■ System recovery options

User’s Manual 1-2

■ Restoring the pre-installed software from the Recovery hard disk drive

■ Restoring the pre-installed software from your created Recovery Media

If you are a new user, follow the steps in each section of this chapter as you prepare to operate your computer

■ Use a virus-check program and make sure it is updated regularly.

■ Never format storage media without checking its content - formatting

destroys all stored data.

■ It is a good idea to periodically back up the internal hard disk drive or

other main storage device to external media. General storage media is not durable or stable over long periods of time and under certain conditions may result in data loss.

■ Before you install a device or application, save any data in memory to

the hard disk drive or other storage media. Failure to do so may result in the loss of data.

Connecting the AC Adaptor

Attach the AC adaptor when you need to charge the battery or you want to operate from AC power. It is also the fastest way to get started, because the battery pack will need to be charged before you can operate from battery power.

The AC adaptor can be connected to any power source supplying from 100 to 240 volts and 50 or 60 hertz. For details on using the AC adaptor to charge the battery pack, refer to Chapter 6, Power and Power-up Modes.

Getting Started

User’s Manual 1-3

Getting Started

■ Always use the TOSHIBA AC adaptor that was included with your

computer or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury. TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor.

■ Never plug the AC adaptor into a power source that does not

correspond to both the voltage and the frequency specified on the regulatory label of the unit. Failure to do so could result in a fire or electric shock, possibly resulting in serious injury.

■ Always use or purchase power cables that comply with the legal

voltage and frequency specifications and requirements in the country of use. Failure to do so could result in a fire or electric shock, possibly resulting in serious injury.

■ The supplied power cord conforms to safety rules and regulations in

the region the product is bought and should not be used outside this region. For use in other regions, please buy power cords that conform to safety rules and regulations in the particular region.

■ Do not use a 3-pin to 2-pin conversion plug.

■ When you connect the AC adaptor to the computer, always follow the

steps in the exact order as described in the User’s Manual. Connecting the power cable to a live electrical outlet should be the last step otherwise the adaptor DC output plug could hold an electrical charge and cause an electrical shock or minor bodily injury when touched. As a general safety precaution, avoid touching any metal parts.

■ Never place your computer or AC adaptor on a wooden surface,

furniture, or any other surface that could be marred by exposure to heat since the computer base and AC adaptor's surface increase in temperature during normal use.

■ Always place your computer or AC adaptor on a flat and hard surface

that is resistant to heat damage. Refer to the enclosed Instruction Manual for Safety and Comfort for

detailed precautions and handling instructions.

User’s Manual 1-4

1. Connect the power cord to the AC adaptor.

Figure 1-1 Connecting the power cord to the AC adaptor (2-pin plug)

Getting Started

Figure 1-2 Connecting the power cord to the AC adaptor (3-pin plug)

Either a 2-pin or 3-pin adaptor/cord will be included with the computer depending on the model.

2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack on the right side of the computer.

Figure 1-3 Connecting the adaptor to the computer

3. Plug the power cord into a live wall outlet - the DC IN/Battery indicator on the front of the computer should glow.

User’s Manual 1-5

Opening The Display

The display panel can be opened to a wide range of angles for optimal viewing. While holding down the palm rest with one hand so that the main body of

the computer is not raised, slowly lift the display panel - this will allow the angle of the display panel to be adjusted to provide optimum clarity.

Use reasonable care when opening and closing the display panel. Opening it vigorously or slamming it shut could damage the computer.

■ Be careful not to open the display panel too far as this could put stress

on the display panel’s hinges and cause damage.

■ Do not press or push on the display panel.

■ Do not lift the computer by the display panel.

■ Do not close the display panel with pens or any other objects left in

between the display panel and the keyboard.

■ When opening or closing the display panel, place one hand on the

palm rest to hold the computer in place and use the other hand to slowly open or close the display panel (Do not use excessive force when opening or closing the display panel).

Getting Started

Figure 1-4 Opening the display panel

User’s Manual 1-6

Turning On The Power

This section describes how to turn on the power - the Power indicator will then indicate the status. Please refer to the System Indicators section in Chapter 6, Power and Power-up Modes for more information.

■ After you turn on the power for the first time, do not turn it off until you

have set up the operating system. Please refer to the section Starting

Up for The First Time for more information.

■ Volume cannot be adjusted during Windows Setup.

1. Open the display panel.

2. Press and hold the computer’s power button for two or three seconds.

Getting Started

1.POWER BUTTON

Figure 1-5 Turning on the power

Starting Up for The First Time

The Windows 7 Startup Screen will be the first screen displayed when you turn on the power. Follow the on-screen instructions on each screen in order to properly install the operating system.

When it is displayed, be sure to read the Software License Terms carefully.

Turni ng Off The Power

The power can be turned off in one of three modes, either Shut Down Mode, Hibernation Mode or Sleep Mode.

Shut Down Mode

When you turn off the power in Shut Down Mode no data will be saved and the computer will boot to the operating system's main screen the next time it is turned on.

User’s Manual 1-7

1. If you have entered data, either save it to the hard disk drive or to other storage media.

2. Make sure all disk/disc activity has stopped before removing the CD/DVD or floppy diskette.

■ Make sure the Optical Disc Drive indicator is off. If you turn off the

power while a disk (disc) is being accessed, you may lose data or damage the disk.

■ Never turn off the power while an application is running. Doing so

could cause loss of data.

■ Never turn off the power, disconnect an external storage device or

remove storage media during data read/write. Doing so can cause data loss.

3. Click Start.

4. Click the Shut down button ( ).

5. Turn off any peripheral devices connected to your computer.

Do not turn the computer or peripheral devices back on immediately - wait a short period to avoid any potential damage.

Sleep Mode

If you have to interrupt your work, you are able to turn off the power without exiting from your software by placing the computer into Sleep Mode. In this mode data is maintained in the computer's main memory so that when you turn on the power again, you can continue working right where you left off.

When you have to turn off your computer aboard an aircraft or in places where electronic devices are regulated or controlled, always completely shut down the computer. This includes turning off any wireless communication functionalities and cancelling settings that reactivate the computer automatically, such as a timer recording function. Failure to completely shut down the computer in this way could allow the operating system to reactivate and run pre-programmed tasks or preserve unsaved data, which could interfere with aviation or other systems, possibly causing serious injury.

Getting Started

■ Before entering Sleep Mode, be sure to save your data.

■ Do not install or remove a memory module while the computer is in

Sleep Mode. The computer or the memory module could be damaged.

■ Do not remove the battery pack while the computer is in Sleep Mode

(unless the computer is connected to an AC power source). Data in memory will be lost.

User’s Manual 1-8

Getting Started

■ When the AC adaptor is connected, the computer will go into Sleep

Mode according to the settings in the Power Options (to access it, Start → Control Panel → System and Security → Power Options).

■ To restore the operation of the computer from Sleep Mode, press and

hold the power button or any key on the keyboard for a short amount of time. Please note that keyboard keys can only be used if the Wake-up on Keyboard option is enabled within the HW Setup utility.

■ If the computer enters Sleep Mode while a network application is

active, the application might not be restored when the computer is next turned on and the system returns from Sleep Mode.

■ To prevent the computer from automatically entering Sleep Mode,

disable Sleep Mode within the Power Options (to access it, Start → Control Panel → System and Security → Power Options).

■ To use the Hybrid Sleep function, configure it in the Power Options.

Benefits of Sleep Mode

The Sleep Mode feature provides the following benefits:

■ Restores the previous working environment more rapidly than does the

Hibernation Mode feature.

■ Saves power by shutting down the system when the computer receives

no input or hardware access for the time period set by the System Sleep Mode feature.

■ Allows the use of the panel power off feature.

Executing Sleep Mode

You can also enable Sleep Mode by pressing FN + F3 - please refer to Chapter 5, The Keyboard, for further details.

You can enter Sleep Mode in one of the following ways:

■ Click Start, point to the arrow icon ( ) and then select

Sleep from the menu.

■ Close the display panel. Please note that this feature must be enabled

within the Power Options (to access it, click Start → Control Panel → System and Security → Power Options).

■ Press the power button. Please note that this feature must be enabled

within the Power Options (to access it, click Start → Control Panel → System and Security → Power Options).

When you turn the power back on, you can continue where you left when you shut down the computer.

User’s Manual 1-9

■ When the computer is shut down in Sleep Mode, the power indicator

will blink amber.

■ If you are operating the computer on battery power, you can lengthen

the overall operating time by turning it off into Hibernation Mode - Sleep Mode will consume more power while the computer is off.

Sleep Mode limitations

Sleep Mode will not function under the following conditions:

■ Power is turned back on immediately after shutting down.

■ Memory circuits are exposed to static electricity or electrical noise.

Hibernation Mode

The Hibernation Mode feature saves the contents of memory to the hard disk drive when the computer is turned off so that, the next time it is turned on, the previous state is restored. Please note that the Hibernation Mode feature does not save the status of any peripheral devices connected to the computer.

■ Save your data. While entering Hibernation Mode, the computer saves

the contents of memory to the hard disk drive. However, for safety sake, it is best to save your data manually.

■ Data will be lost if you remove the battery or disconnect the AC adaptor

before the save is completed. Wait for the Optical Disc Drive indicator to go out.

■ Do not install or remove a memory module while the computer is in

Hibernation Mode. Data will be lost.

Getting Started

Benefits of

The Hibernation Mode feature provides the following benefits:

■ Saves data to the hard disk drive when the computer automatically

shuts down because of a low battery condition.

■ You can return to your previous working environment immediately when

you turn on the computer.

■ Saves power by shutting down the system when the computer receives

no input or hardware access for the time period set by the System Hibernate feature.

■ Allows the use of the panel power off feature.

User’s Manual 1-10

Hibernation

Mode

Getting Started

Starting Hibernation Mode

You can also enable Hibernation Mode by pressing FN + F4 - please refer to Chapter 5, The Keyboard, for further details.

To enter Hibernation Mode, follow the steps below.

1. Click Start.

2. Point to the arrow icon ( ) and then select Hibernate from the menu.

Automatic Hibernation Mode

The computer can be configured to enter Hibernation Mode automatically when you press the power button or close the lid. In order to define these settings, you can follow the steps as described below:

1. Click Start and click the Control Panel.

2. Click System and Security and click Power Options.

3. Click Choose what the power buttons do or Choose what closing

the lid does.

4. Enable the desired Hibernation Mode settings for When I press the power button and When I close the lid.

5. Click the Save changes button.

Data Save in Hibernation Mode

When you turn off the power in Hibernation Mode, the computer will take a moment to save the current data in memory to the hard disk drive.

After you turn off the computer, and the content of memory has been saved to the hard disk drive, turn off the power to any peripheral devices.

Do not turn the computer or devices back on immediately. Wait a moment to let all capacitors fully discharge.

Restarting The Computer

Certain conditions require that you reset the computer, for example, if:

■ You change certain computer settings.

■ An error occurs and the computer does not respond to your keyboard

commands.

If you need to restart the computer, there are three ways this can be achieved:

■ Click Start, point to the arrow icon( ) and then select

Restart from the menu.

■ Press CTRL, ALT and DEL simultaneously (once) to display the menu

window, then select Restart from the Shut down options.

User’s Manual 1-11

■ Press the power button and hold it down for five seconds. Once the

computer has turned itself off, wait between ten and fifteen seconds before turning the power on again by pressing the power button.

System Recovery Options

There is a hidden partition allocated on the hard disk drive for the System Recovery Options.

This partition stores files which can be used to repair the system in the event of a problem.

The System Recovery Options feature will be unusable if this partition is deleted.

System Recovery Options

The System Recovery Options feature is installed on the hard disk when shipped from the factory. The System Recovery Options menu includes tools to repair startup problems, run diagnostics or restore the system.

See the Windows Help and Support content for more information about Startup Repair.

The System Recovery Options can also be run manually to repair problems.

The procedure is as follows. Follow the instructions shown on the onscreen menu.

1. Turn off the computer.

2. While holding the F8 key, turn on the computer.

3. The Advanced Boot Options menu will be displayed. Use the arrow keys to select Repair Your Computer and press ENTER.

4. Follow the on-screen instructions.

Getting Started

Check your Windows manual for more information on backing up your system (including the system image backup feature).

User’s Manual 1-12

System Recovery

This section describes the creation of Recovery Media and their use.

Creating Recovery Media

This section describes how to create Recovery Media.

■ Be sure to connect the AC adaptor when you create Recovery Media.

■ Be sure to close all other software programs except the Recovery

Media Creator.

■ Do not run software such as screen savers which can put a heavy load

on the CPU.

■ Operate the computer at full power.

■ Do not use power-saving features.

■ Do not write to the media when the virus check software is running.

Wait for it to finish, then disable virus detection programs including any software that checks files automatically in the background.

■ Do not use utilities, including those intended to enhance hard disk drive

access speed. They may cause unstable operation and damage data.

■ Do not shut down/log off or Sleep/Hibernate while writing or rewriting

the media.

■ Set the computer on a level surface and avoid places subjected to

vibrations such as airplanes, trains, or cars.

■ Do not use on an unstable surface such as a stand.

Getting Started

A recovery image of the software on your computer is stored on the hard disk drive, and can be copied to either DVD or USB Flash Memory by using the following steps:

1. Select either blank DVD or USB Flash Memory. The application will allow you to choose from a variety of different

media onto which the recovery image can be copied including DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW and USB Flash Memory.

■ Please note that some of the above media may not be compatible with

the optical disc drive installed into your computer. You should therefore verify the optical disc drive supports the blank media you have chosen before proceeding.

■ USB Flash Memory will be formatted and all the data in the USB Flash

Memory will be lost when proceeding.

2. Turn on your computer and allow it to load the Windows 7 operating system from the hard disk drive as normal.

3. Insert the media into the computer.

■ Insert the first blank disc into the optical disc drive tray, or

insert the USB Flash Memory into one available USB port.

User’s Manual 1-13

Getting Started

4. Double click the Recovery Media Creator icon on the Windows 7 desktop, or select the application from Start Menu.

5. After Recovery Media Creator starts, select the type of media and the title you wish to copy, and then click the Create button.

Restoring the pre-installed software from the Recovery hard disk drive

A portion of the total hard disk drive space is configured as a hidden recovery partition. This partition stores files which can be used to restore pre-installed software in the event of a problem.

If you subsequently set up your hard disk drive again, do not change, delete or add partitions in a manner other than specified in the manual, otherwise you may find that space for the required software is not available.

In addition, if you use a third-party partitioning program to reconfigure the partitions on your hard disk drive, you may find that it becomes impossible to setup your computer.

When the sound mute feature has been activated by pressing the FN + ESC key, be sure to disable this to allow sounds to be heard before starting

the restore process. Please refer to Chapter 5, The Keyboard, for further details.

You can not use System Recovery Options if restoring the pre-installed software without System Recovery Options.

When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost.

1. Turn off your computer.

2. While holding down 0 (zero) key on the keyboard, turn on your computer.

3. A menu will be displayed from which you should follow the on-screen instructions.

Restoring the pre-installed software from your created Recovery Media

If the pre-installed files are damaged, you are able to either use the Recovery Media you have created or the hard disk drive recovery process to restore the computer to the state it was in when you originally received it. To perform this restoration, follow the steps below:

When the sound mute feature has been activated by pressing the FN + ESC key, be sure to disable this to allow sounds to be heard before starting

the restore process. Please refer to Chapter 5, The Keyboard, for further details.

You can not use System Recovery Options if restoring the pre-installed software without System Recovery Options.

User’s Manual 1-14

Getting Started

When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost.

1. Load the Recovery Media into the computer and turn off the computer's power.

2. While holding down F12 key on the keyboard, turn on your computer when the TOSHIBA Leading Innovation>>> logo screen appears, release the F12 key.

3. Use the up and down cursor key to select the appropriate option from the menu according to your actual recovery media. Please refer to the

Boot Priority section in Chapter 7, HW Setup and Passwords for fur-

ther information.

4. A menu will be displayed from which you should follow the on-screen instructions

When drivers/utilities are installed, you can setup the respective drivers/utilities from the following place. To open the setup files, Click Start → All Programs → TOSHIBA → Applications and Drivers.

User’s Manual 1-15

The Grand Tour

This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer.

Front with The Display Closed

Figure 2-1 shows the computer’s front with its display panel in the closed position.

1.BRIDGE MEDIA SLOT

Chapter 2

Figure 2-1 Front of the computer with display closed

Bridge media slot This slot allows you to easily transfer data from

devices, such as digital camera and PDA, that use flash memory (Secure Digital (SD)/Secure Digital High Capacity (SDHC)/Secure Digital Extended Capacity (SDXC) /MultiMediaCard (MMC)).

User’s Manual 2-1

Left Side

The Grand Tour

Figure 2-2 shows the computer’s left side.

1.EXTERNAL MONITOR PORT

2.FAN VENT

3.SECURITY LOCK SLOT

4.LAN JACK

5.HEADPHONE JACK

6.MICROPHONE JACK

7.USB PORTS

Figure 2-2 The left side of the computer

External monitor port

This 15-pin port allows you to connect an external monitor.

Fan vent Provides air flow for the fan.

Be careful not to block the fan vent. Also be careful to keep foreign objects out of the vents. A pin or similar object can damage the computer’s circuitry.

Security lock slot A security cable attaches to this slot. The

optional security cable anchors your computer to a desk or other large object to deter theft.

LAN jack This jack allows you to connect to a LAN. The

adaptor has built-in support for Fast Ethernet (10BASE-T/100BASE-TX). See Chapter 4, Operating Basics, for details.

User’s Manual 2-2

The Grand Tour

■ Do not connect any cable other than a LAN cable to the LAN jack. It

could cause damage or malfunction.

■ Do not connect the LAN cable to a power supply. It could cause

damage or malfunction.

Headphone jack A standard 3.5 mm mini headphone jack enables

connection of a stereo headphone (16 ohm minimum) or other device for audio output. When you connect headphones, the internal speaker is automatically disabled.

Microphone jack A standard 3.5 mm mini microphone jack enables

connection of a microphone or other device for audio input.

Universal serial bus (USB 2.0) ports

Two universal serial bus (USB) ports comply with USB 2.0 standards, which enable data transfer speeds 40 times faster than the USB 1.1 standards.

Keep foreign objects out of the USB connectors. A pin or similar object can damage the computer’s circuitry.

Operation of all functions of all USB devices has not been confirmed. Some functions might not execute properly.

User’s Manual 2-3

Right Side

The Grand Tour

Figure 2-3 shows the computer’s right side.

1.OPTICAL DISC DRIVE

2.DC IN 19V

Figure 2-3 The right side of the computer

Optical disc drive A DVD Super Multi (± R DL) drive.

DC IN 19V The AC adaptor connects to this socket. Use only

the model of AC adaptor that comes with the computer. Using the wrong adaptor can damage your computer.

Back Side

Figure 2-4 shows the computer’s back side.

Figure 2-4 The computer’s back side

User’s Manual 2-4

Underside

Figure 2-5 shows the underside of the computer. Make sure the display is closed before turning over your computer.

The Grand Tour

1.BATTERY PACK

2.BATTERY PACK LOCK

3.BATTERY RELEASE LATCH

4.MEMORY MODULE COVER

Figure 2-5 The underside of the computer

Battery pack The battery pack powers the computer when the

AC adaptor is not connected. The Batteries section in Chapter 6, Power and Power-up

Modes, describes how to access the battery

pack. Additional battery packs can be purchased from your TOSHIBA dealer to extend the computer’s battery operating time.

Battery pack lock Slide the battery pack lock to unlocked position to

free the battery release latch.

Battery release latch Slide this latch to release the battery pack.

This latch moves only when the computer is upside down.

Memory module cover

User’s Manual 2-5

This cover protects two memory module sockets. One or two modules are preinstalled.

Front with The Display Open

Figure 2-6 shows the front of the computer with the display open.To open the display, lift the display up and position the display at a comfortable viewing angle.

The Grand Tour

1.WEB CAMERA LED* 6.WEB CAMERA*

UILT-IN MICROPHONE*7.DISPLAY SCREEN

2.B

3.POWER BUTTON 8.STEREO SPEAKER (RIGHT)

TEREO SPEAKER (LEFT)9.TOUCHPAD

4.S

5.SYSTEM INDICATORS 10.TOUCHPAD CONTROL BUTTONS *PROVIDED WITH SOME MODELS.

Figure 2-6 The front with the display open

Web camera LED The web camera LED glows blue when the web

camera software is used. (Provided with some models)

Built-in microphone Records monaural sounds into your applications.

(Provided with some models)

User’s Manual 2-6

The Grand Tour

Power button Press the power button to turn the computer’s

power on and off. The Power indicator indicates the status.

Stereo speaker The speaker emits sound generated by your

software as well as audio alarms, such as low battery condition, generated by the system.

System indicators

Two LEDs allow you to monitor the DC IN, Battery charge and power status. Refer to the

System Indicators section in this chapter.

Web camera Record/Send still or video images with this

integrated web camera. (Provided with some models)

Display screen Please be aware that, when the computer is

operating on the AC adaptor, the image displayed on the internal screen will be somewhat brighter than when it operates on battery power. This difference in brightness levels is intended to save power when operating on batteries. For more information on the computer's display, please refer to the Display

Controller and Video Mode section in Appendix

Tou chpad Moves the pointer and selects or activates items

on the screen. Can be set to perform other mouse functions, such as scrolling, selecting, and double-clicking.

Tou chpad control buttons

Function like the left and right buttons on an external mouse.

Please handle your computer carefully to avoid scratching or damaging the surface.

User’s Manual 2-7

System Indicators

Figure 2-7 shows the system indicators, which light when various computer operations are in progress.

1.DC IN/BATTERY

2.POWER

The Grand Tour

Figure 2-7 System indicators

DC IN/Battery The DC IN/Battery indicator shows the condition

of the charge. Green means fully charged and glows amber means being charged. During critical low battery, the indicator will blink amber. Refer to Chapter 6, Power and Power-up Modes.

Power The Power indicator glows green when the

computer is on. If you turn off the computer in Sleep Mode, this indicator blinks green. If the computer shuts down, this indicator shows no light.

User’s Manual 2-8

Keyboard Indicators

The figure below shows the position of the CAPS LOCK indicator and the NUM LOCK indicator which show the following conditions:

■ When the CAPS LOCK indicator glows, the keyboard is in all-caps

mode.

■ When the NUM LOCK indicator glows, the ten key allows you to enter

numbers.

The Grand Tour

1.CAPS LOCK INDICATOR

2.NUM LOCK INDICATOR

Figure 2-8 Keyboard indicators

CAPS LOCK This indicator glows green when letter keys are

locked into their uppercase format.

NUM LOCK When the NUM LOCK indicator glows, you can

use the number keys on the keyboard for number entry.

User’s Manual 2-9

Optical Disc Drive

The computer is equipped with a DVD Super Multi (±R DL) drive.

Region Codes for DVD Drives and Media

DVD

DVD drive and their media are manufactured according to the specifications of six marketing regions. When you purchase DVD-Video, make sure it matches your drive, otherwise it will not play properly.

Code Region

1 Canada, United States 2 Japan, Europe, South Africa, Middle East 3 Southeast Asia, East Asia 4 Australia, New Zealand, Pacific Islands, Central America,

South America, Caribbean

5 Russia, Indian Subcontinent, Africa, North Korea,

Mongolia

6 China

Writable Discs

This section describes the types of writable CD/DVD discs. Check the specifications for your drive to for the type of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Refer to Chapter 4,

Operating Basics.

The Grand Tour

CDs

■ CD-R discs can be written only once. The recorded data cannot be

erased or changed.

■ CD-RW discs can be recorded more than once.

DVDs

■ DVD-R, DVD+R, DVD-R DL and DVD+R DL discs can be written only

once. The recorded data cannot be erased or changed.

■ DVD-RW, DVD+RW and DVD-RAM discs can be recorded more than

once.

User’s Manual 2-10

DVD Super Multi (± R DL) Drive

The full-size DVD Super Multi drive (±R DL) module allows you to record data to rewritable CD/DVDs as well as run either 12cm (4.72") or 8cm (3.15") CD/DVDs without using an adapter.

The read speed is slower at the center of a disc and faster at the outer edge.

DVD read 8 speed (maximum) DVD-R write 8 speed (maximum) DVD-RW write 6 speed (maximum) DVD+R write 8 speed (maximum) DVD+RW write 8 speed (maximum) DVD+R DL write 6 speed (maximum) DVD-R DL write 6 speed (maximum) DVD-RAM write 5 speed (maximum) CD read 24 speed (maximum) CD-R write 24 speed (maximum) CD-RW write 24 speed (maximum,

Ultra-speed media)

The Grand Tour

User’s Manual 2-11

AC Adaptor

The AC adaptor converts AC power to DC power and reduces the voltage supplied to the computer. It can automatically adjust to any voltage from 100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to use the computer in almost any region.

To recharge the battery, simply connect the AC adaptor to a power source and the computer. See Chapter 6 Power and Power-up Modes for details.

The Grand Tour

Figure 2-9 The AC adaptor (2-pin plug)

Figure 2-10 The AC adaptor (3-pin plug)

■ Depending on the model in question, either a 2-pin or 3-pin

adaptor/power lead will be bundled with the computer.

■ Do not use a 3-pin to 2-pin conversion plug.

■ The supplied power cord conforms to safety rules and regulations in

the region the product is bought and should not be used outside of this region. In order to use the adaptor/computer in other regions, you should please buy a power cord that conforms to the safety rules and regulations in that particular region.

Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury. TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor.

User’s Manual 2-12

Chapter 3

Hardware, Utilities and Options

Hardware

This section describes the hardware of your computer. The actual specifications may vary depending on the model you

purchased.

Processor

Memory

Built-in Your computer is equipped with one processor

and processor type varies depending on model. To check which type of processor is included in your model, open the TOSHIBA PC Diagnostic Tool Utility by clicking Start TOSHIBA→Utilities→PC Diagnostic Tool.

Slots PC2-6400, PC3-8500 1 GB,2 GB or 4 GB

memory modules can be installed in the two memory slots.

■ Maximum size of memory can be installed on

Mobile Intel is 4 GB.

■ Maximum system memory size and speed

are depending on the model you purchased.

GL40 Express Chipset models

→

All Programs

→

User’s Manual 3-1

Hardware, Utilities and Options

Video RAM*6 Depending on the model you purchased.

Mobile Intel

GM45 Express Chipset model/ Mobile Intel® GL40 Express Chipset mode/ Mobile Intel® HM55 Express Chipset model: Video RAM capacity shares with main memory, and the proportion depends on Dynamic Video Memory Technology.

AMD M880G Chipset model: Video RAM capacity shares with main memory,

Disks

and the proportion depends on ATI HyperMemory

Hard Disk Drive (HDD)*4

The computer is equipped with a Hard Disk Drive (HDD) for nonvolatile storage of data and software.(Depending on the model you

purchased)

■ HDD

■ 250 GB

■ 320 GB

■ 500 GB

Please note that part of the hard disk drive’s overall capacity is reserved as administration space.

User’s Manual 3-2

Hardware, Utilities and Options

DVD Super Multi (±R DL) Drive

Some models are equipped with a full-size DVD Super Multi (± R DL) drive module that allows you to record data to rewritable CD/DVDs as well as run CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed. It writes CD-R at up to 24 speed, CD-RW at up to 24 speed, DVD-R at up to 8 speed, DVD-RW at up to 6 speed, DVD-RAM at up to 5 speed, DVD+R at up to 8 speed, DVD+RW at up to 8 speed, DVD+R DL at up to 6 speed and DVD-R DL at up to 6 speed. This drive supports the following formats:

■ DVD-ROM

■ DVD-Video

■ DVD-R

■ DVD-RW

■ DVD+R

■ DVD+RW

■ DVD-RAM

■ DVD+R DL

■ DVD-R DL

■ CD-DA

■ CD-Text

■ CD-R

■ CD-RW

■ CD-ROM Mode 1, Mode 2

■ CD-ROM XA Mode 2 (Form1, Form2)

■ CD-G (Audio CD only)

■ Photo CD (single/multi-session)

■ Enhanced CD (CD-EXTRA)

■ Addressing Method 2

Display

The computer's internal display panel supports high-resolution video graphics and can be set to a wide range of viewing angles for maximum comfort and readability.

Display panel *5

User’s Manual 3-3

39.6cm (15.6”) TFT LCD screen, 16 million colors, with the following resolution:

■ HD, 1366 horizontal x 768 vertical pixels

Hardware, Utilities and Options

Display Power Saving Technology

Your model may include the Display Power Saving Technology feature that can save the computer's power consumption by optimizing picture contrast on the internal LCD. This feature can be used if the computer is:

■ configured with Mobile Intel

chip by Intel chip by Intel

or Mobile Intel® HM55 Express Chipset model in graphic

■ running under battery mode

■ using the internal LCD display only

The Display Power Saving Technology feature can be enabled in the Intel Graphics and Media Control Panel. To access this control panel in one of the following ways:

■ Click Start → Control Panel. Select Large icons or Small icons in

View by, and then click Intel

■ Right-click on the desktop and click Graphics Properties....

In this control panel,

1. Click Power and then click Power Features.

2. Select On battery from the drop-down menu in Graphics Power Plan Settings and then select the Display Power Saving Technology check box.

If you want to improve the picture quality under the conditions mentioned above, adjust the setting towards Maximum Quality or disable this feature.

*Please visit your region's web site or refer to the catalog for the configuration details of the model that you have purchased.

AMD® Vari-Bright

Your model may include the AMD® Vari-BrightTM feature that can save the computer's power consumption by optimizing picture contrast on the internal LCD. This feature can be used if the computer is:

■ running under battery mode.

■ using the internal LCD display only

The power and performance settings can be adjusted in the Catalyst Control Center.To access this utility, go to

Start → All Programs → Catalyst Control Center → CCC - Advanced → Enable Vari-Bright

If you want to improve the picture quality under the conditions mentioned above, adjust the setting towards Maximum Quality or disable this feature.

GM45 Express Chipset model in graphic

Graphics and Media.

Keyboard

Built-in 104 keys or 105 keys,dedicated cursor control,

and keys. See Chapter 5, The

Keyboard, for details.

User’s Manual 3-4

Pointing Device

Hardware, Utilities and Options

Built-in

A touchpad and control buttons in the palm rest enable control of the on-screen pointer.

Power

Battery pack*3

RTC battery

AC adaptor

The computer is powered by one rechargeable lithium-ion battery pack.

The internal RTC battery backs up the Real Time Clock (RTC) and calendar.

The universal AC adaptor provides power to the system and recharges the batteries when they are low. It comes with a detachable power cord. Because it is universal, it can receive a range of AC voltage between 100 and 240 volts.

Ports

Headphone Enables connection of a stereo headphone.

Microphone Enables connection of a microphone.

External monitor 15-pin, analog VGA port.

Universal Serial Bus (USB 2.0) ports

Two Universal Serial Bus (USB) enable a chain connection of USB-equipped devices to your computer through the ports.

Slots

Bridge media slot This slot allows you to easily transfer data from

User’s Manual 3-5

devices, such as digital cameras and Personal Digital Assistants, that use flash memory (Secure Digital (SD)/Secure Digital High Capacity (SDHC)/Secure Digital Extended Capacity (SDXC)/MultiMediaCard (MMC)). see Bridge

Media Slot in this Chapter for details.

Hardware, Utilities and Options

Multimedia

Web camera Record/Send still or video images with this

integrated web camera. (Provided with some models)

Sound system

Windows Sound System compatible sound system provides internal speaker as well as jacks for an external microphone and headphone.

Communications

LAN

Wireless LAN*7

The computer has built-in support for Fast Ethernet (10BASE-T/100BASE-TX).

It is preinstalled as a standard device in some markets.

A Wireless LAN PCI Express Mini Card is equipped with other LAN systems based on Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing radio technology that complies with the IEEE 802.11 Standard (Revision B, G and N).

Roaming over multiple channels.

Security

Security lock slot Connects a security lock to anchor the computer

to a desk or other large object.

Software

Operating system Windows 7 is available. Refer to the preinstalled

Software section at the Chapter 1, Getting Started.

TOSHIBA Utilities A number of utilities and drivers are preinstalled

to make your computer more convenient to use. Refer to the TOSHIBA Value Added Package and

Utilities and Applications sections in this chapter.

Plug and Play When you connect an external device to the

computer or when you install a component, Plug and Play capability enables the system to recognize the connection and make the necessary configurations automatically.

User’s Manual 3-6

Special Features

The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. To

access the Power Options, click Start → Control Panel → System and

Maintenance → Power Options.

Hot keys Key combinations allow you to quickly modify the

Hardware, Utilities and Options

system configuration directly from the keyboard without running a system configuration program.

Display automatic power off

HDD automatic power off

System automatic sleep/hibernation

Power-on password Two levels of password security, supervisor and

Instant security A hot key function blanks the screen and

Intelligent power supply

This feature automatically cuts off power to the internal display when there is no keyboard input for a time specified. Power is restored when any key is pressed. This can be specified in the Power Options.

This feature automatically cuts off power to the hard disk drive when it is not accessed for a time specified. Power is restored when the hard disk is accessed. This can be specified in the Power Options.

This feature automatically shuts down the system in Sleep Mode or Hibernation Mode when there is no input or hardware access for a time specified. This can be specified in the Power Options.

user, are available to prevent unauthorized access to your computer.

disables the computer providing data security.

A microprocessor in the computer’s intelligent power supply detects the battery’s charge and calculates the remaining battery capacity. It also protects electronic components from abnormal conditions, such as voltage overload from an AC adaptor. This can be specified in the Power Options.

Battery save mode This feature allows you to configure the computer

in order to save battery power. This can be specified in the Power Options.

User’s Manual 3-7

Hardware, Utilities and Options

Panel power on/off This feature turns power to the computer off

when the display panel is closed and turns it back on when the panel is opened. This can be specified in the Power Options.

Low battery automatic Hibernation Mode

When battery power is exhausted to the point that computer operation cannot be continued, the system automatically enters hibernation and shuts down. This can be specified in the Power Options.

Heat dispersal To protect from overheating, the CPU has an

internal temperature sensor. If the computer’s internal temperature rises to a certain level, the cooling fan is turned on or the processing speed is lowered. This can be specified in the Power Options.

Maximum Performance

Turns on fan first, then if necessary lowers CPU processing speed.

Battery Optimized

Turns on fan first, if necessary lowers CPU processing speed earlier than at Maximum Performance Mode for long battery life.

Hibernation This feature allows you to turn off the power

without exiting from your software. The contents of main memory are saved to the hard disk, when you turn on the power again, you can continue working right where you left off. Refer to the

Turning Off The Power section in Chapter 1, Getting Started, for details.

Sleep If you have to interrupt your work, you can turn

off the power without exiting from your software. Data is maintained in the computer’s main memory. When you turn on the power again, you can continue working right where you left off.

User’s Manual 3-8

TOSHIBA Value Added Package

This section describes the TOSHIBA Component features preinstalled on the computer.

TOSHIBA Power Saver

TOSHIBA Power Saver provides you with the features of more various power supply managements.

Hardware, Utilities and Options

TOSHIBA Zooming Utility

TOSHIBA PC Diagnostic Tool

TOSHIBA Flash Cards

TOSHIBA Accessibility

This utility allows you to enlarge or reduce the icon size on the Windows Desktop, or the zoom factor associated with specific supported applications.

The TOSHIBA PC Diagnostic Tool will display basic system configuration information and allow the functionality of some of the computer’s built-in hardware devices to be tested.

This utility supports the following functions.

■ Hot key function

■ TOSHIBA utility launcher function

The TOSHIBA Accessibility utility provides support to movement impaired users when they need to use the TOSHIBA hot key functions. In use, the utility allows you to make the FN key, “sticky” that is you can press it once, release it, and then press one of the “F” keys in order to access its specific function. When set, the FN key will remain active until another key is pressed.

User’s Manual 3-9

Utilities and Applications

This section describes preinstalled utilities and tells how to start them. For details on operation, refer to each utility’s online manual, help files or

readme.txt files

TOSHIBA Assist TOSHIBA Assist is a graphical user interface that

HW Setup utility To start the utility, click the Windows Start button,

TOSHIBA DVD PLAYER

TOSHIBA Disc Creator

TOSHIBA DVD-RAM utility

TOSHIBA ConfigFree

Hardware, Utilities and Options

provides access to specific tools, utilities and applications that make the use and configuration of the computer easier.

point to All Programs, click TOSHIBA, click Utilities, and select HWSetup icon.

This software is provided for playback of DVDVideo. (Is preinstalled with some models)

To start this utility, click Start

TOSHIBA DVD PLAYER PLAYER.

You can create CD/DVDs in several formats including audio CDs that can be played on a standard stereo CD player and data CD/DVDs to store the files and folderson your hard disk drive. This software can be used on a model with DVD Super Multi (± R DL) drive.

You can boot TOSHIBA Disc Creator from the menu bar as follows.

Start→All Programs→TOSHIBA→CD&DVD

→

Applications

TOSHIBA DVD-RAM Utility has the function of Physical Format and Write-Protect to DVD-RAM.

This utility is contained the setup module of TOSHIBA Disc Creator.

You can boot TOSHIBA DVD-RAM Utility from the menu bar as follows.

→

Start Applications

ConfigFree is a suite of utilities to allow easy control of communication devices and network connections. ConfigFree also allows you to find communication problems and create profiles for easy switching between location and communication networks.

You can boot ConfigFree from the menu bar as follows.

Start

All Programs→TOSHIBA→CD&DVD

→

All Programs→TOSHIBA→ConfigFree

Disc Creator

→

DVD-RAM Utility

→

All Programs →

→

TOSHIBA DVD

User’s Manual 3-10

Hardware, Utilities and Options

TOSHIBA Media Controller

TOSHIBA Face Recognition

TOSHIBA HDD/SSD Alert

TOSHIBA Service Station

TOSHIBA Bulletin Board

TOSHIBA ReelTime

This application allows you to control your music, pictures and videos by streaming content to any compatible device in your home.

To access this utility,click Start

TOSHIBA →TOSHIBA Media Controller TOSHIBA Media Controller.

For more information, please refer to the TOSHIBA Media Controller Help.

TOSHIBA Face Recognition uses a face verification library to verify the face data of users when they log in to Windows. If the verification is successful, the user will be logged into Windows automatically. The user can thus avoid having to enter a password or the like, which makes the login process easier.(Is preinstalled with some models)

The TOSHIBA HDD/SSD Alert includes wizard functions to monitor the Disk Drive operating status and execute system backup.

This application allows your computer to automatically search for TOSHIBA software updates or other alerts from TOSHIBA that are specific to your computer system and its programs. When enabled, this application periodically transmits to our servers a limited amount of system information, which will be treated in strict accordance with the rules and regulations as well as applicable data protection law.

To access this utility, click Start

TOSHIBA→Utilities→Service Station

Bulletin Board is a convenient place to pin things to visually organize in a fun and creative way. Simply drag and drop your favorite pictures, files or notes to pin them on the Board. You can use it to create thumbnail shortcuts, reminders, to-do list and so on according to your personal style.

To access this utility, click Start

TOSHIBA→TOSHIBA Bulletin Board

This application is a graphical history/indexing tool that enables you to view recently accessed files in a fun and easy-to-use format. View and scroll through your history of opened or imported files via thumbnails in an intuitive user interface.

To access this utility, click Start→All Programs

TOSHIBA→TOSHIBA ReelTime

→

All Programs

→

All Programs

→

All Programs

→

User’s Manual 3-11

Options

Hardware, Utilities and Options

You can add a number of options to make your computer even more powerful and convenient to use. The following options are available:

Memory expansion Two memory expansion slots are available for

installing PC2-6400, PC3-8500 1 GB, 2 GB or 4 GB memory modules of all models.

■ Maximum size of memory can be installed on

Mobile Intel® GL40 Express Chipset models is 4 GB.

■ Maximum system memory size and speed

are depending on the model you purchased.

Battery Pack An additional battery pack 3 cell type and 6 cell

type can be purchased from your TOSHIBA dealer. The battery pack is identical to the one that came with your computer. Use it as a spare or replacement.

AC adaptor If you use your computer at more than one site, it

may be convenient to purchase an additional AC adaptor for each site so you will not have to carry the adaptor with you.

USB FDD kit

Security lock A slot is available to attach a security cable to the

The USB floppy disk drive accommodates either a 1.44 MB or 720 KB floppy disk through connection to one of the computer’s USB ports. In use, please be aware that, while you cannot format 720 KB floppy disks under Windows 7, you are able to read and write to disks that have already been formatted.

computer to deter theft.

Optional Devices

Optional devices can expand the computer’s capabilities and its versatility. The following optional devices are available from your TOSHIBA dealer:

Cards/Memory

■ Memory cards: Secure Digital (SD), Secure Digital High Capacity

(SDHC), Secure Digital Extended Capacity (SDXC) and MultiMediaCard (MMC)

■ Memory expansion

User’s Manual 3-12

Power Devices

■ Additional battery pack (3 cell and 6 cell)

■ Additional AC adaptor

Peripheral Devices

■ USB FDD Kit

■ External monitor

Other

■ Security lock

Bridge Media Slot

The computer is equipped with a Bridge media slot that can accommodate some kinds of memory media with various memory capacities so that you can easily transfer data from devices, such as digital cameras and Personal Digital Assistants.

Keep foreign objects out of the Bridge media slot. Never allow metal objects, such as screws, staples and paper clips, to enter the computer or Keyboard. Foreign metal objects can create a short circuit, which can cause computer damage and fire, possibly resulting in serious injury.

Hardware, Utilities and Options

■ This Bridge media slot supports the following memory media.

■ Secure Digital (SD) Card (SD memory card, SDHC memory card,

SDXC memory card, miniSD Card and microSD card)

■ MultiMediaCard (MMCTM)

■ Please note that an adaptor is required to use miniSD/microSD Card.

■ Please note that not all memory media have been tested and verified to

work correctly. Therefore, it is not possible to guarantee that all memory media will operate properly.

1.SECURE DIGITAL (SD)CARD

2.MICROSD CARD AND ADAPTOR

3.MULTIMEDIACARD (MMC)

Figure 3-1 Examples of memory media

User’s Manual 3-13

Hardware, Utilities and Options

Memory Media

This section provides the important safety precautions in order to handle your memory media.

Points to Note About the SD/SDHC/SDXC Memory Card

SD/SDHC/SDXC memory cards comply with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or playback of digital music. For this reason, you cannot copy or playback protected material on another computer or other device, and you may not reproduce any copyrighted material except for your personal enjoyment.

Below is a simple explanation for distinguishing SD memory cards from SDHC and SDXC memory cards.

■ SD,SDHC and SDXC memory cards appear the same externally.

■ The logo on SD,SDHC and SDXC memory cards are different, so pay

careful attention to the logo when purchasing.

The SD memory card logo is .

The SDHC memory card logo is .

The SDXC memory card logo is .

■ The maximum capacity of SD memory cards is 2 GB. The maximum

capacity of SDHC memory cards is 32 GB.The maximum capacity of SDXC memory cards is 64 GB.

Card Type Capacities

SD 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB,

1 GB, 2 GB. SDHC 4 GB, 8 GB, 16 GB, 32 GB SDXC 64 GB

Memory Media Format

New media cards are formatted according to specific standards. If you wish to reformat a media card, be sure to do so with a device that uses media cards.

Formatting an SD/SDHC/SDXC Memory Card

SD/SDHC/SDXC memory cards are sold already formatted in conformity to specific standards.If you reformat an SD/SDHC/SDXC memory card, be sure to reformat it with a device such as digital camera or digital audio player that uses the SD/SDHC/SDXC memory cards, not with the format command provided within Windows.

User’s Manual 3-14

Hardware, Utilities and Options

Should you need to format all areas of the memory card, including the protected area, you will need to obtain an appropriate application that applies the copy protection system.

Media Care

Observe the following precautions when handling the card.

Card Care

■ Do not twist or bend cards.

■ Do not expose cards to liquids or store in humid areas or lay media

close to containers of liquid.

■ Do not touch the metal part of a card or expose it to liquids or let it get

dirty.

■ After using card, return it to its case.

■ The card is designed so that it can be inserted only one way. Do not try

to force the card into the slot.

■ Do not leave a card partially inserted in the slot. Press the card until you

hear it click into place.

Memory Card Care

■ Set the write-protect switch to the lock position, if you do not want to

record data.

■ Memory cards have a limited lifespan, so it is important to backup

important data.

■ Do not write to a card if the battery power is low. Low power could affect

writing accuracy.

■ Do not remove a card while read/write is in progress.

For more details on using memory cards, see manuals accompanying the cards.

About the Write-protect

The following memory media have a function for protect.

■ SD Card (SD memory card, SDHC memory card and SDXC memory

card)

Set the write-protect switch to the lock position, if you do not want to record data.

User’s Manual 3-15

Hardware, Utilities and Options

Inserting a Memory Media

The following instructions apply to all types of supported media devices. To insert a memory media, follow the steps as detailed below:

1. Insert the memory card.

2. Press gently to ensure a firm connection.

1.BRIDGE MEDIA SLOT

2.THE MEMORY CARD*

HE CARD’S SHAPE DEPENDS ON THE CARD YOU PURCHASED.

Figure 3-2 Inserting the memory card

■ When inserting memory media, do not touch the metal contacts. You

could expose the storage area to static electricity, which can destroy data.

■ Do not turn the computer off or switch to Sleep Mode or Hibernation

Mode while files are being copied - doing so may cause data to be lost.

Removing a Memory Media

The following instructions apply to all types of supported media devices. To remove a memory media, follow the steps as detailed below:

1. open the Safely Remove Hardware and Eject Media icon on the system tray and disable the inserted memory card.

2. Grasp the card and remove it.

User’s Manual 3-16

Hardware, Utilities and Options

1.THE MEMORY CARD*

HE CARD’S SHAPE DEPENDS ON THE CARD YOU PURCHASED.

Figure 3-3 Removing the inserted memory card

■ If you remove the memory media or turn off the power while the

computer is accessing the memory media, you may lose data or damage the media.

■ Do not remove the memory media while the computer is in Sleep or

Hibernation Mode. The computer could become unstable or data in the memory media could be lost.

■ Do not remove only the miniSD/microSD Card while leaving the

adaptor in the Bridge Media slot.

Memory Expansion

You can install additional memory in the computer’s memory module to increase the amount of RAM.

Installing Memory Module

To install a memory module, make sure the computer is in boot mode then:

1. Turn the computer off in boot mode. Refer to the Turning Off The

Power section in Chapter 1.

■ If you use the computer for a long time, the memory modules will

become hot. In this case, let the memory modules cool to room temperature before you replace them.

■ Do not try to install a memory module with the computer turned on or

turned off in Sleep and Hibernation Mode. You can damage the computer and the memory module.

User’s Manual 3-17

Hardware, Utilities and Options

2. Remove all cables connected to the computer.

3. Turn the computer upside down and remove the battery pack (refer to

Replacing The Battery Pack section in Chapter 6.)

4. Remove one screw securing the memory module cover.

5. Lift off the cover.

■ Use a point size 0 Phillips screwdriver.

■ Insert the two memory modules of the same specifications and

capacity into Slot A and Slot B respectively. The computer will operate in dual channel mode. You can access the inserted memory modules efficiently in dual channel.

Figure 3-4 Removing the cover

6. Insert the memory module into the connector on the computer. Press the module carefully and firmly to ensure a solid connection.

7. Push the module down so that it lies flat and is secured by two latches.

Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems.

User’s Manual 3-18

Hardware, Utilities and Options

Figure 3-5 Inserting the memory module

Figure 3-6 Pushing the memory module down

8. Seat the cover and secure it with one screw.

9. When you turn the computer on, it should automatically recognize the total memory capacity. Use the HW Setup program to verify that the added memory is recognized. If it is not recognized, check the module’s connection.

User’s Manual 3-19

Hardware, Utilities and Options

Removing Memory Module

To remove the memory module, make sure the computer is in boot mode then:

1. Turn the computer off and remove all cables connected to the computer.

■ If you use the computer for a long time, the memory modules will

become hot. In this case, let the memory modules cool to room temperature before you replace them.

■ Do not try to remove a memory module with the computer turned on or

turned off in Sleep and Hibernation Mode. You can damage the computer and the memory module.

2. Turn the computer upside down and remove the battery pack (refer to Chapter 6, Power and Power-up Modes.)

3. Remove one screw securing the memory module cover.

4. Lift off the cover.

5. Use a slender object such as a pen to press two latches on either side of the memory module to the outside. The memory module will pop up.

6. Grasp the memory module by the sides and pull it out.

Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems.

Figure 3-7 Removing the memory module

7. Seat the cover and secure it with one screw.

User’s Manual 3-20

Additional Battery Pack (3 Cell and 6 Cell)

You can increase the portability of the computer with additional battery packs. If you’re away from an AC power source, you can replace a low battery with a fully charged one. See Chapter 6, Power and Power-up

Modes.

Additional AC Adaptor

If you frequently transport the computer between different sites such as your home and office, purchasing an AC adaptor for each location will reduce the weight and bulk of your carrying load.

USB FDD Kit

The external FDD drive module can be connected to the USB port.

External Monitor

An external analog monitor can be connected to the external monitor port on the computer.To connect a monitor, follow the steps as detailed below:

connecting the monitor cable

1. Turn the computer’s power off.

2. Connect the monitor cable to the external monitor port.

Hardware, Utilities and Options

1.EXTERNAL MONITOR PORT

2.MONITOR CABLE

Figure 3-8 Connecting the monitor cable to the external monitor port

User’s Manual 3-21

3. Turn the external monitor’s power on.

4. Turn the computer’s power on. When you turn on the power, the computer automatically recognizes the

monitor and determines whether it is color or monochrome device.In the event that you find that there are issues getting an image displayed on the correct monitor, you should consider using the FN + F5 hot key to change the display settings (if you then disconnect the external monitor before you turn the computer's power off, be sure to press FN + F5 hot key again to switch to the internal display).

Please refer to Chapter 5, The Keyboard, for further details on using hot keys to change the display setting.

Do not disconnect the external monitor while in Sleep or Hibernation Mode. Turn off the computer before disconnecting the external monitor.

When displaying desktop at external analog monitor, desktop is sometimes displayed on the center of the monitor with black bars around desktop (with small size).

At that time, please read the manual of the monitor and set the display mode which is supporting at the monitor. Then it will be displayed with suitable size with correct aspect ratio.

Security Lock

A security lock enables you to anchor your computer to a desk or other heavy object to help prevent unauthorized removal of the computer.

Attach one end of a cable to the desk and the other end to the security lock slot on the right side of the computer.

Hardware, Utilities and Options

Connecting the security lock

In order to connect a security cable to the computer, follow the steps asdetailed below:

1. Turn the computer so its left side faces you.

2. Align the security cable with the lock slot and secure it in place.

1.SECURITY LOCK

2.KEY

Figure 3-9 Security lock

User’s Manual 3-22

Operating Basics

This chapter gives information on basic operations including using the touchpad, optical disc drives, Audio/Video controls, the web camera, the microphone, wireless communication and LAN. It also provides tips on caring for your computer, diskettes and CD/DVD.

Using The Touchpad

To use the touchpad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go.

Two buttons below the touchpad are used like the buttons on a mouse pointer.

Press the left button to select a menu item or to manipulate text or graphics designated by the pointer. Press the right button to display a menu or other function depending on the software you are using.

You can also tap the touchpad to perform functions similar to those of the left button on a standard mouse.

Click: Tap the touchpad once. Double-click: Tap twice.

Drag and drop: Tap to select the material you want to move. Leave

your finger on the touchpad after the second tap and move the material.

Chapter 4

User’s Manual 4-1

1.TOUCHPAD CONTROL BUTTONS

2.TOUCHPAD

Figure 4-1 Touchpad and control buttons

Touch Pad Gesture

Please refer to the touch pad settings in mouse properties.

Operating Basics

User’s Manual 4-2

Operating Basics

Using The Web Camera

Built-in web camera is provided with some models. This section describes the bundled webcam utility, which can capture still

and video images. The web camera will auto-run when Windows starts and the LED glows blue.

Please unstick the protective plastic-film before using the web camera.

1.BUILT-IN MICROPHONE

2.WEB CAMERA LED

3.W

EB CAMERA LENS

Figure 4-2 Web camera

User’s Manual 4-3

Using TOSHIBA Web Camera Application

2 3 4 5 6

TOSHIBA Web Camera Application is pre-configured to start when you turn on Windows 7; if you need to restart it go to Start → All Programs → TOSHIBA → Utilities → Web Camera Application.

1.CAPTURE SETTINGS .CAMERA RESOLUTION .CAPTURE STILL IMAGE .VIDEO RECORDING .OPEN/CLOSE PREVIEW AREA .DELETE RECORDED FILE

Operating Basics

Figure 4-3 Using TOSHIBA Web Camera Application

Capture Settings Open Capture Settings dialog box.

Chooses from the Basic tab to select photo and video saving location, select Capture Format and Video Quality.

Camera Resolution Choose resolution for Preview, Capture and

Record.

Capture Still Image Click to capture a still image, and see a preview

of the captured image in preview area.

Video Recording Click to start recording. One more to stop

recording and see preview of the video in preview area.

Open/Close Preview Area

Click to open Preview Area. One more to close Preview Area.

Delete Recorded File Choose a thumbnail of recorded file and click this

button to delete this file from hard disk.

User’s Manual 4-4

Using The TOSHIBA Face Recognition

TOSHIBA Face Recognition uses a face verification library to verify the face data of users when they log in to Windows. The user can thus avoid having to enter a password or the like, which makes the login process

easier. This software is preinstalled with some models.

Note on Use

■ TOSHIBA Face Recognition does not guarantee the correct

identification of a user. Changes to the likeness of a registrant, such as hair style changes, wearing a cap, or wearing glasses may effect the recognition rates when such changes occur after the registrant had registered.

■ TOSHIBA Face Recognition may incorrectly recognize faces that are

similar to a registrant.

■ For high security purposes, TOSHIBA Face Recognition is not a

suitable substitute for Windows passwords. When security is a high priority, use your established Windows passwords to log in.

■ Bright background light and/or shadows may prevent a registrant from

being recognized correctly. In that case, log in using your Windows password. If recognition of a registrant fails repeatedly, refer to your computer documentation to learn ways to improve recognition performance.

■ TOSHIBA Face Recognition records face data in a log when face

recognition fails. When transferring ownership or disposing of your computer, please uninstall the application or delete all the logs created by the application. For details on how to do this, see help file.

■ TOSHIBA Face Recognition can be used only in Windows Vista and

Windows 7.

Operating Basics

Disclaimer

TOSHIBA does not guarantee that the face recognition utility technology will be completely secure or error-free. TOSHIBA does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the face recognition software or utility.

TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DATA, NETWORK SYSTEMS OR REMOVABLE STORAGE MEDIA ARISING OUT OF OR RESULTING FROM THE USE OF THE PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY THEREOF.

User’s Manual 4-5

How to Register The Face Recognition Data

Take a picture for facial verification purposes, and register the data needed when you log in. To register the data needed when you log in, follow the steps as described below:

1. To launch this utility, click Start → All Programs → TOSHIBA → Utilities → Face Recognition.

■ The Registration screen is displayed for a logged-in user whose

face has not been registered.

■ The Management screen is displayed for a logged-in user whose

face has already been registered.

2. Click the Register button in the Management screen. The Registration screen is displayed.

■ If you wish to practice, click on the Next button in the Registration

screen.

■ If you do not wish to practice, click on the Skip button in the

Registration screen.

3. Click the Next button to start the guide.

4. First, take a picture while moving your neck slightly to the left and right.

5. Now take a picture while moving your neck down and up.

■ Click the Back button to practice the guide once more.

6. Click the Next button to start image-capturing process. Adjust the position of your face so that it fits within the face-shaped frame.

7. Once your face has been positioned properly, the recording will commence. Start moving your neck very slightly to the left and right,

and then move your neck down and up.

8. Registration will end after you have repeatedly moved your neck left, right, down and up. When the register succeeds, below message will

be displayed on the screen:

Registration successful. Now we’ll do the

verification test. Click the Next button.

Click the Next button to perform the verification test.

9. Perform the verification test. Face the screen as you do when you register.

■ If verification fails, click the Back button and re-register. Please refer

to step 8 from step 6.

10. If verification is successful, click the Next button and register an account.

11. Register the account. Fill in the account registration fields.

■ Fill in the all fields.

When you have finished it, click Next button.

Operating Basics

User’s Manual 4-6

12. The Management screen is displayed. The registered account name will be displayed. Clicking on it will cause the captured image of your face to be displayed on the left.

How to Delete The Face Recognition Data

Delete image data, account information, and personal record data created during registration. To delete the Face Recognition Data, follow the steps as described below:

1. To launch this utility, click Start → All Programs → TOSHIBA → Utilities → Face Recognition. The Management screen is displayed.

2. Select a user which is deleted in the Management screen.

3. Click the Delete button. “You are about to delete the user data. Would you like to continue?” will be displayed on the

screen.

■ If you do not want the data to be deleted, click the No button and

you will then be returned to the Management screen.

■ Clicking on the Yes button will remove the selected user from the

Management screen.

How to Launch The Help File

For further information on this utility, please refer to help file.

■ To launch the help file, click Start → All Programs → TOSHIBA →

Utilities → Face Recognition Help.

Operating Basics

Windows Logon Via TOSHIBA Face Recognition

This section explains how to login to Windows with TOSHIBA Face Recognition. Two authentication modes are provided.

■ 1:N Mode Login screen : If the face authentication tile is selected by

default, you can log in without using the keyboard or mouse.

■ 1:1 Mode Login screen : This mode is essentially the same as N

mode, but the Select Account screen will appear before the Display Captured Image screen, and you will need to select the user account to be authenticated in order to start the authentication process.

1:N Mode Login Screen

1. Turn on the computer.

2. The Select Tiles screen will be displayed.

3. Select Start face recognition.

4. “Please face the camera” will be displayed.

5. Verification will be performed. If the authentication is successful, the

image data taken in step 4 will be faded in and placed over one another.

■ If an error occurs during authentication, you will be returned to the

Select Tiles screen.

User’s Manual 4-7

6. Windows Welcome screen will be displayed, and will be logged in automatically to Windows.

1:1 Mode Login Screen

1. Turn on the computer.

2. The Select Tiles screen will be displayed.

3. Select Start face recognition.

4. The Select Account screen will be displayed.

5. Select the account, and click the arrow button.

6. “Please face the camera” will be displayed.

7. Verification will be performed. If the authentication is successful, the image data taken in step 6 will be faded in and placed over one another.

■ If an error occurs during authentication, you will be returned to the

Select Tiles screen.

8. Windows Welcome screen will be displayed, and will be logged in automatically to Windows.

■ If authentication was successful, but an authentication error

subsequently occurred during the login to Windows, you will be asked to provide your account information.

Using Optical Disc Drives

Operating Basics

The full-size DVD Super Multi (±R DL) drive provides high-performance execution of CD/DVD. You can run either 12cm (4.72") or 8cm (3.15") CD/DVDs without an adapter. A Serial ATA interface controller is used for CD/DVD operation.

■ Use the TOSHIBA DVD PLAYER application to view DVD-Video discs

in the model which has preinstalled TOSHIBA DVD PLAYER.

■ Use the Windows Media Player application to view DVD-Video discs in

the model which has not preinstalled TOSHIBA DVD PLAYER.

Please also refer to the Writing CD/DVDs on DVD Super Multi (±R DL)

Drive section for precautions on writing to CD/DVDs.

User’s Manual 4-8

Loading Discs

Please follow the steps below and refer to figures.

1. a. When the power is on, press the eject button to open the drawer

slightly.

1.EJECT BUTTON

Figure 4-4 Pressing the eject button

b. Pressing the eject button will not open the drawer when the drive’s

power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.

Operating Basics

1.EJECT HOLE

Figure 4-5 Manual release with the eject hole

User’s Manual 4-9

2. Grasp the drawer gently and pull until it is fully opened.

Figure 4-6 Pulling the drawer open

3. Lay the CD/DVD with the label side up in the drawer.

Operating Basics

Figure 4-7 Inserting a CD/DVD

When the drawer is fully opened, the edge of the computer will extend slightly over the CD/DVD tray. Therefore, you will need to turn the CD/DVD at an angle when you place it in the tray. After seating the CD/DVD, however, make sure it lies flat, as shown in above figure.

User’s Manual 4-10

Operating Basics

■ Do not touch the laser lens. Doing so could cause misalignment.

■ Do not keep foreign matter from entering the drive. Check the back

edge of the tray to make sure it carries no debris before closing the drive.

4. Press gently at the center of the CD/DVD until you feel it click into place. The CD/DVD should lie below the top of the spindle, flush with the spindle base.

5. Push the center of the drawer to close it. Press gently until it locks into place.

If the CD/DVD is not seated properly when the drawer is closed, the CD/DVD might be damaged. Also, the drawer might not open fully when you press the eject button.

Figure 4-8 Closing the drawer

Removing Discs

To remove the CD/DVD, follow the steps below and refer to below figure.

Do not press the eject button while the computer is accessing the drive. Wait for the optical disc drive indicator to go out before you open the drawer. Also, if the CD/DVD is spinning when you open the drawer, wait for it to stop before you remove it.

Please follow the steps below and refer to figures.

1. To pop the drawer partially open, press the eject button. Gently pull the drawer out until it is fully opened.

User’s Manual 4-11

Operating Basics

■ When the drawer pops open slightly, wait a moment to make sure the

CD/DVD has stopped spinning before pulling the drawer fully open.

■ Turn off the power before you use the eject hole. If the CD/DVD is

spinning when you open the drawer, the CD/DVD could fly off the spindle and cause injury.

2. The CD/DVD extends slightly over the sides of the drawer so you can grasp it. Hold the CD/DVD gently and lift it out.

Figure 4-9 Removing a CD/DVD

3. Push the center of the drawer to close it. Press gently until it locks into place.

Writing CD/DVDs on DVD Super Multi (±R DL) Drive

Some models are equipped with a full-size DVD Super Multi (±R DL ) drive, which can be used to write data to either CD-R/-RW or DVD-R/RW/+R/+RW/-RAM/+R DL/-R DL discs. The following application for writing is supplied: TOSHIBA Disc Creator.

Important Message (DVD Super Multi (±R DL) Drive)

Before you write or rewrite to CD-R/-RW or DVD-R/-RW/+R/+RW/-RAM/+R DL/-R DL disc, read and follow all setup and operating instructions in this section.

If you fail to do so, the DVD Super Multi (±R DL) drive may not function properly, and you may fail to write or rewrite, lose data or incur other damage.

User’s Manual 4-12

Before Writing or Rewriting

■ Based on TOSHIBA’s limited compatibility testing, we suggest the

following manufacturers of CD-R/-RW and DVD-R/+R/-RW/+RW/RAM/+R DL/-R DL disc. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates

CD-R:

TAIYO YUDEN CO., LTD. MITSUBISHI KAGAKU MEDIA CO., LTD. HITACHI MAXELL LTD.

CD-RW: (High-Speed and Multi-Speed)

MITSUBISHI KAGAKU MEDIA CO., LTD.

CD-RW: (Ultra-Speed)

MITSUBISHI KAGAKU MEDIA CO., LTD.

DVD-R:

DVD Specifications for Recordable Disc for General Version 2.0

TAIYO YUDEN CO., LTD. (for 8x and 16x speed media) MITSUBISHI KAGAKU MEDIA CO., LTD. (for 4x, 8x and 16x speed media) HITACHI MAXELL LTD. (for 8x and 16x speed media)

Operating Basics

DVD-R (Dual Layer):

MITSUBISHI KAGAKU MEDIA CO., LTD. (for 4x and 8x speed media)

DVD-R for Labelflash:

FUJIFILM CORPORATION. (for 16x speed media)

DVD+R:

MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x and 16x speed media) TAIYO YUDEN CO., LTD. (for 8x and 16x speed media)

DVD+R (Dual Layer):

MITSUBISHI KAGAKU MEDIA CO., LTD. (for 2.4x and 8x speed media)

DVD+R for Labelflash:

FUJIFILM CORPORATION. (for 16x speed media)

User’s Manual 4-13

Operating Basics

DVD-RW:

DVD Specifications for Recordable Disc for General Version 1.1 or Version 1.2

VICTOR COMPANY OF JAPAN, LTD. (JVC) (for 2x, 4x and 6x speed media)

MITSUBISHI KAGAKU MEDIA CO., LTD. (for 2x, 4x and 6x speed media)

DVD+RW:

MITSUBISHI KAGAKU MEDIA CO., LTD. (for 2.4x, 4x and 8x speed media)

DVD-RAM:

DVD Specifications for Recordable Disc for General Version 2.0, Version 2.1 or Version 2.2

Panasonic CORPORATION. (for 3x and 5x speed media) HITACHI MAXELL LTD. (for 3x and 5x speed media)

This DVD Super Multi (±R DL) drive cannot use discs that allow writing faster than 16x speed(DVD-R and DVD+R media), 8x speed DVDR(Double layer),DVD+RW, and DVD+R(Double layer) media, 6x speed(DVD-RW media), 5x speed (DVD-RAM media).

■ If the disc is poor in quality, dirty or damaged, writing or rewriting errors

may occur. Be careful to check the disc for dirt or damage before you use it.

■ The actual number of rewrites to CD-RW, DVD-RW, DVD+RW or DVD-

RAM is affected by the quality of the disc and the way it is used.

■ There are two types of DVD-R discs: authoring and general use discs.

Do not use authoring discs. Only general use discs can be written to by a computer drive.

■ We can support only format 1 of DVD-R DL. Therefore you can not do

the additional writing. If your data is under DVD-R(SL) capacity, we suggest to use DVD-R(SL) media.

■ You can use DVD-RAM discs that can be removed from a cartridge and

DVD-RAM discs designed without a cartridge. You cannot use a disc with a 2.6 GB single-sided capacity or 5.2 GB double-sided capacity.

■ Other DVD-ROM drives for computers or other DVD players may not be

able to read DVD-R/-R DL/-RW or DVD+R/+R DL/+RW discs.

■ Data written to a CD-R/DVD-R/DVD+R disc cannot be deleted either in

whole or in part.

■ Data deleted (erased) from a CD-RW and DVD-RW, DVD+RW and

DVD-RAM disc cannot be recovered. Check the content of the disc carefully before you delete it. If multiple drives that can write data to discs are connected, be careful not to delete data from the wrong drive.

User’s Manual 4-14

Operating Basics

■ In writing to a DVD-R/-R DL/-RW, DVD+R/+R DL/+RW or DVD-RAM

disc, some disc space is required for file management, so you may not be able to write the full capacity of the disc.

■ Since the disc is based on the DVD standard, it will be filled with dummy

data if the written data is less than about 1 GB. Even if you write only a small amount of data, it might take time to fill in the dummy data.

■ DVD-RAM formatted by FAT32 cannot be read in Windows 2000

without DVD-RAM Driver Software.

■ When multiple drives that can write data to discs are connected, be

careful not to write to the wrong drive.

■ Be sure to connect the universal AC adaptor before you write or rewrite.

■ Before you enter Sleep/Hibernation Mode, be sure to finish DVD-RAM

writing. Writing is finished if you can eject DVD-RAM media.

■ Be sure to close all other software programs except the writing

software.

■ Do not run software such as a screen saver, which can put a heavy load

on the CPU.

■ Operate the computer in the full-power mode. Do not use power-saving

features.

■ Do not write while virus check software is running. Wait for it to finish,

and then disable virus detection programs including any software that checks files automatically in the background.

■ Do not use hard disk utilities, including those intended to enhance HDD

access speed. They may cause unstable operation and data damage.

■ Write from the computer’s HDD to the CD/DVD. Do not try to write from

shared devices such as a LAN server or any other network device.

■ Writing with software other than TOSHIBA Disc Creator is not

recommended.

When Writing or Rewriting

Please observe/consider the following when you write or rewrite to a CDR/-RW, DVD-R/-R DL/-RW/-RAM or DVD+R/+R DL/+RW disc.

■ Do not perform any of the following actions:

■ Change users in the Windows 7 operating system.

■ Operate the computer for any other function, including use of a

mouse or touchpad, closing/opening the LCD panel.

■ Start a communication application such as Wireless LAN.

■ Apply impact or vibration to the PC.

■ Install, remove or connect external devices, including items such as

a Secure Digital(SD), Secure Digital High Capacity(SDHC), Secure Digital Extended Capacity (SDXC), MultiMediaCard(MMC), USB device, external monitor or an optical digital device.

■ Use the Audio/Video control button to reproduce music or voice.

■ Open the optical disc drive.

User’s Manual 4-15

■ Do not use shut down/log off and sleep/hibernation while writing or

rewriting.

■ Make sure writing or rewriting is completed before going into

sleep/hibernation. Writing is completed if you can open the DVD Super Multi (±R DL) drive tray.

■ Set the computer on a level surface and avoid places subject to

vibration such as airplanes, trains, or cars. Do not use an unstable surface such as a stand.

■ Keep mobile phones and other wireless communication devices away

from the computer.

■ Always copy data from the HDD to the optical disc. Do not use cut-and-

paste. The original data will be lost if there is a write error.

Disclaimer (DVD Super Multi (±R DL) Drive)

TOSHIBA does not bear responsibility for the following:

■ Damage to any CD-R/-RW or DVD-R/-R DL/-RW/+R/+R DL/+RW/DVD-

RAM disc that may be caused by writing or rewriting with this product.

■ Any change or loss of the recorded contents of CD-R/-RW or DVD-R/-R

DL/-RW/+R/+R DL/+RW/DVD-RAM disc that may be caused by writing or rewriting with this product, or for any business profit loss or business interruption that may be caused by the change or loss of the recorded contents.

■ Damage that may be caused by using third party equipment or

software. Given the technological limitations of current optical disc writing drives,

you may experience unexpected writing or rewriting errors due to disc quality or problems with hardware devices. Also, it is a good idea to make two or more copies of important data, in case of undesired change or loss of the recorded contents.

Operating Basics

TOSHIBA Disc Creator

Note the following limitations when you use TOSHIBA Disc Creator:

■ DVD-Video cannot be created using TOSHIBA Disc Creator.

■ DVD-Audio cannot be created using TOSHIBA Disc Creator.

■ You cannot use TOSHIBA Disc Creator's 'Audio CD for Car or Home

CD Player' function to record music to DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL or DVD+RW media.

■ Do not use the 'Disc Backup' function of TOSHIBA Disc Creator in order

to copy DVD-Video or DVD-ROM material that has copyright protection.

■ DVD-RAM discs cannot be backed up using the 'Disc Backup'

functionof TOSHIBA Disc Creator.

■ You cannot back up CD-ROM, CD-R or CD-RW media to DVD-R, DVD-

R DL or DVD-RW media using the 'Disc Backup' function of TOSHIBA Disc Creator.

User’s Manual 4-16

Operating Basics

■ You cannot back up CD-ROM, CD-R or CD-RW media to DVD+R,

DVD+R DL or DVD+RW media using the 'Disc Backup'function of TOSHIBA Disc Creator.

■ You cannot back up DVD-ROM, DVD-Video, DVD-R, DVD-R DL, DVD-

RW, DVD+R, DVD+R DL or DVD+RW to CD-R or CD-RW media using the 'Disc Backup' function of TOSHIBA Disc Creator.

■ TOSHIBA Disc Creator cannot record in packet format.

■ You might not be able to use the 'Disc Backup' function of TOSHIBA

Disc Creator to back up a DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL or DVD+RW disc that was made with other software on a different optical media recorder.

■ If you add data to a DVD-R, DVD-R DL, DVD+R or DVD+R DL disc that

you have already recorded to, you might not be able to read the added data under some circumstances. For example, it cannot be read under 16-bit operating systems, such as Windows 98SE and Windows Me, while in Windows NT4 you will need Service Pack 6 or later, and in Windows 2000, you will need Service Pack 2. In addition to this, some DVD-ROM and DVD-ROM/CD-RW drives cannot read this added data regardless of the operating system.

■ TOSHIBA Disc Creator does not support recording to DVD-RAM discs -

to achieve this you should use Windows Explorer or another similar utility.

■ When you back up a DVD disc, be sure that the source drive supports

recording to DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL or DVD+RW media - if this is not the case then the source disc might not be backed up correctly.

■ When you back up a DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R

DL or DVD+RW disc, be sure to use the same type of disc.

■ You cannot partially delete any data written to a CD-RW, DVD-RW,

DVD+RW disc.

Data Verification

To verify that data has been written or rewritten correctly to a data CD/DVD you should follow the steps below before you begin the write/rewrite process:

1. Display the setting dialog box by one of the following two steps:

■ Click the Recording settings button ( ) for writing on the main

toolbar in the Data CD/DVD mode.

■ Select Settings for Each Mode

menu.

2. Mark the Verify written data check box.

3. Select File Open or Full Compare mode.

4. Click the OK button.

→

Data CD/DVD in the Settings

How to Learn More about TOSHIBA Disc Creator

Please refer to the Help files for additional TOSHIBA Disc Creator information.

User’s Manual 4-17

TOSHIBA DVD PLAYER

Please be aware of the following limitations when you use the TOSHIBA DVD PLAYER. (Is preinstalled with some models)

Notes on Use

■ "TOSHIBA DVD PLAYER" software is supported for playback of DVD-

Video and DVD-VR.

■ Frame dropping, audio skipping or out of synch audio and video may

occur during playback of some DVD-Video titles.

■ Close all other applications when using the “TOSHIBA DVD PLAYER”.

Do not open any other applications or carry out any other operations during DVD-Video playback. Playback may stop or not function properly in some situations.

■ Unfinalized DVDs created on home DVD recorders may not be playable

on the computer.

■ Use DVD-Video discs with a region code which is either “the same as

the factory default setting” or “ALL”.

■ Do not playback DVD discs Video while watching or recording television

programs using other applications. Doing so may cause DVD-Video playback or television program recording errors. In addition, if prescheduled recording starts during DVD-Video playback it may cause DVD-Video playback or television program recording errors. Please view DVD-Video during times when there is no recording prescheduled.

■ The resume function cannot be used with some discs on the “TOSHIBA

DVD PLAYER”.

■ It is recommended the AC adaptor be connected when playing DVD-

Video. Power saving features may interfere with smooth playback. When playing DVD-Video using battery power, set the Power Options to “Balance“.

■ Screen savers will not display while playing a movie in the "TOSHIBA

DVD PLAYER". The computer will also not go into Sleep Mode, Hibernation Mode or Shut Down while using "TOSHIBA DVD PLAYER.

■ Do not configure the Display automatic power off function to run while

the “TOSHIBA DVD PLAYER” is running.

■ Do not switch to Hibernation or Sleep Mode when running the

“TOSHIBA DVD PLAYER”.

■ Do not lock the computer using the Windows logo( ) + L keys or

the FN + F1 keys when running the “TOSHIBA DVD PLAYER”.

■ Do not change Windows Users while "TOSHIBA DVD PLAYER" is

running.

■ The "TOSHIBA DVD PLAYER" does not have a parental control

function.

■ In order to protect copyrights, the Windows Print Screen function is

disabled when "TOSHIBA DVD PLAYER" is running.

Operating Basics

User’s Manual 4-18

■ (Print Screen functions are disabled even when running other

applications besides "TOSHIBA DVD PLAYER" and when "TOSHIBA DVD PLAYER" is minimized.) Please close the "TOSHIBA DVD PLAYER" to use the Print Screen function.

■ For some DVD-Video discs, using the control window to change the

audio track will also change the subtitle track.

■ Carry out the installation/uninstallation of the "TOSHIBA DVD PLAYER"

under a user account with administrator rights.

■ If you see the screen blinking while playing DVD with subtitle on at

Media Player, please use "TOSHIBA DVD PLYER" or "Media Center" to play DVD.

Display Devices & Audio

■ "TOSHIBA DVD PLAYER" will only run when "Colors" is set to "True

color (32 bit)". Click Start → Control Panel → Appearance and Personalization → Display → Adjust resolution, click Advanced

settings, select Monitor tab, set colors to True color (32 bit).

■ If the DVD-Video image is not displayed on an external display or

television, stop the "TOSHIBA DVD PLAYER", and change the screen resolution. To change the screen resolution, click Start → Control

Panel → Appearance and Personalization → Display → Adjust resolution. However, video cannot be output to some external displays

and televisions due to output or playback conditions.

■ When viewing DVD-Video on an external display or TV, change the

display device before playing. DVD-Video cannot be displayed simultaneously (in clone mode) on both the computer's display panel and an external display.

■ Do not change the screen resolution while running the "TOSHIBA DVD

PLAYER".

Operating Basics

User’s Manual 4-19

Starting TOSHIBA DVD PLAYER

Use the following procedure to start “TOSHIBA DVD PLAYER“.

1. Insert an DVD-Video in the DVD Super Multi drive while Windows 7 is

running. When an DVD-Video disc is set in the DVD drive, the following application selection screen may appear. If this occurs, select Play

DVD movie (using TOSHIBA DVD PLAYER), to launch the TOSHIBA DVD PLAYER.

Operating Basics

2. Select Start → All Programs → TOSHIBA DVD PLAYER → TOSHIBA

DVD PLAYER to start "TOSHIBA DVD PLAYER".

Operating TOSHIBA DVD PLAYER

Notes on using “TOSHIBA DVD PLAYER“.

■ Screen display and available features may vary amongst and scenes.

■ If the menu is opened in the Display Area using the Control Top Menu

or Menu buttons, touch pad and mouse menu may not be able to be used.

Open TOSHIBA DVD PLAYER HELP

TOSHIBA DVD PLAYER features and instructions are also detail in TOSHIBA DVD PLAYER Help. Use the following procedure to open TOSHIBA DVD PLAYER Help.

■ Click the Help button ( ) in the Display Area.

User’s Manual 4-20

Media Care

This section provides tips on protecting data stored on your CD/DVD. Handle your media with care. The following simple precautions will

increase the lifetime of your media and protect the data stored on them.

CD/DVD

1. Store your CD/DVD in the container they came in to protect them and

2. Do not bend the CD/DVD.

3. Do not write on, apply a sticker to, or otherwise mark the surface of the

4. Hold the CD/DVD by its outside edge or the edge on the center hole.

5. Do not expose to direct sunlight, extreme heat or cold.

6. Do not place heavy objects on your CD/DVD.

7. If your CD/DVD become dusty or dirty, wipe them with a clean dry

Operating Basics

keep them clean.

CD/DVD that contains data.

Fingerprints on the surface can prevent the drive from properly reading data.

cloth. Wipe from the center out, do not wipe in a circular direction around the CD/DVD. If necessary, use a cloth dampened in water or a

neutral cleaner. Do not use benzine, thinner or similar cleaner.

Sound System

This section describes some of the audio control functions.

Adjusting System Volume

You can control the overall level of sound using Windows Volume Mixer. To launch Volume Mixer, follow the steps below.

1. Locate the Speaker icon on the task tray.

2. Right-click the Speaker icon on the task tray.

3. Select Open Volume Mixer from the menu.

Click the Device button to display available playback devices. Select Speakers to use the internal speakers for listening. Adjust speaker volume

by moving the slider up or down to raise or lower the volume. Click the Mute button to mute the sound. You may see another control under Applications in Vo lu me Mixer. It is the control for an application which is currently running. The System Sounds is always displayed since it controls the system sounds’ volume.

User’s Manual 4-21

Changing System Sounds

System sounds are assigned to inform you when certain events happen. This section explains how select an existing scheme or save one you have

modified. To launch the configuration dialog window for system sounds, follow the

steps below.

1. Right-click the Speaker icon on the task tray.

2. Select Sounds from the menu.

Smart Audio

You can confirm and change the audio configuration using the Smart Audio. To launch the Smart Audio, click Start → Control Panel → Hardware and Sound → Smart Audio. When you first launch the Smart

Audio, you will see following device tabs.

Volume Mix er

Displays all connected audio devices in the system. Every device has a Volume Slider Bar and a Mute button.

Clicking once on a device will select and highlight it. On Windows 7, double clicking will make it the default device, which is denoted by a green checkmark.

Operating Basics

When a playback device is selected, a preview image is displayed like the computer in the above screenshot. A slider may appear that allows you to adjust the balance between the speakers.

User’s Manual 4-22

Operating Basics

Voice Effects

Controls Voice Recording and Voice Over IP (VOIP) phone conversation settings.

■ Voice Recording - Microphone Noise Reduction effect will be enabled

to suppress background noise and project a clear voice. To select / deselect this setting, click on the Voice Recording icon.

■ Voice Over IP - In addition to Microphone Noise Reduction, Speaker

Noise Reduction and Acoustic Echo Cancellation effects will also be enabled to remove disturbances caused by sound echo. To select / deselect this setting, click on the Voice Over IP icon.

Audio Director

Allows you to define how sound is directed to devices. There are two modes to select: Classic and Multi-Stream.

■ Classic mode - Emulates the behavior of Microsoft Windows XP, where

sound is heard either on the speakers or on the headphones, but not both at the same time. To select Classic mode, click on the corresponding icon.

■ Multi-Stream - Different sounds can be played on speakers and

headphones simultaneously. To select Multi-Stream mode, click on the corresponding icon.

Two "Play" buttons allow you to play separate sounds in both modes:

■ When the red Play button is pressed, a sample sound is played on the

headphones.

■ When the blue Play button is pressed, a different sample sound is

played on the speakers.

In Classic mode, if the headphones are plugged in, both red and blue sounds are heard from the headphones and if they are unplugged, both red and blue sounds are heard from the speakers.

In Multi-Stream mode, the red sound is only played on the headphones and the blue sound is only played on the speakers.

SmartEQ and 3D setting

On this page allow you to customize your listening experience by selecting different profiles for headphones and speakers.

The smart equalizer (EQ) has five presets that automatically enhance the sound quality of music or voice communications. The preset options include: Jazz, Dance, Concert, Classical, and Voice. Each preset has been optimized for the fullest sound experience. For example, the Classical preset emphasizes the middle range of notes while the Dance preset emphasizes the bass end of notes. Selected devices and profiles are denoted by highlighted icons.

To select an equalizer preset, click on the device and then click on the profile desired. For example, to apply the Jazz profile to the speakers:

1. Click on the Speakers button.

User’s Manual 4-23

Operating Basics

2. Click on the Jazz button and you will immediately hear how the Jazz

profile enhances the music output on the speakers.

3. To disable the selected profile, click on the OFF button.

■ Custom - Profiles will be created when you adjust the Equalizer Bars

below the preset icons.

■ Night Mode - An option that boosts vocal clarity while maintaining

background sound quality. It brings up the volume for subtle sounds like whispers while suppressing the volume of loud sounds like explosions. Night Mode allows you to hear details in soundtracks of high energy sound sources without making the volume louder and potentially disturbing others, which is especially useful for late-night viewing.

Two additional effects are offered on this page that apply to stereo speakers only and are disabled for headphones and mono speaker.

■ Phantom Speakers - Gives you a closer-to-live experience when you

are watching a movie or listening to concert music. If you sit between the internal speakers, the sound you hear will appear to be coming from sources around you, rather than just from the speakers on the PC.This option is ON by default when the Concert profile is selected.

■ 3D Immersion - Gives you a headphone experience without actually

wearing one. The effect is particularly useful when you are listening to Voice. This option is ON by default if the Voice profile is selected.

You can adjust the level of the Phantom Speakers and 3D Immersion effects from "None" to "Expanded" by adjusting the Slider Bar under their corresponding icons. For Phantom Speakers, your selection will be depicted by the position of speakers and the opacity of the glow around the speakers and the rays emanating from them. For 3D Immersion, your selection will be depicted by a circle around the PC that will get dimmer or brighter with the movement of the Slider Bar.

Using The Microphone

You can use the built-in or an external microphone that connects to the microphone jack to record monaural sounds into your applications. It can also be used to issue voice commands to applications that support such functions.(Built-in microphone is provided with some models)

Since your computer has a microphone and speaker, “feedback” may be heard under certain conditions. Feedback occurs when sound from the speaker is picked up in the microphone and amplified back to the speaker, which amplifies it again to the microphone.

This feedback occurs repeatedly and causes a very loud, high-pitched noise. It is a common phenomenon that occurs in any sound system when the microphone input is output to the speaker (throughput) and the speaker volume is too loud or too close to the microphone. You can control throughput by adjusting the volume of your speaker or through the Mute function in the Master Volume panel. Refer to your Windows documentation for details on using the Master Volume panel.

User’s Manual 4-24

Wireless Communications

The computer’s wireless communication function supports some wireless communication devices.

■ Do not use the Wireless LAN (Wi-Fi) functionality near a microwave

oven or in areas subject to radio interference or magnetic fields. Interference from a microwave oven or other source can disrupt

operation.

■ Turn all wireless functionalities off when near a person who may have a

cardiac pacemaker implant or other medical electric device. Radio waves may affect pacemaker or medical device operation, possibly resulting in serious injury. Follow the instruction of your medical device

when using any wireless functionality.

■ Always turn off wireless functionality if the computer is near automatic

control equipment or appliances such as automatic doors or fire detectors. Radio waves can cause malfunction of such equipment,

possibly resulting in serious injury.

■ It may not be possible to make a network connection to a specified

network name using the ad hoc network function. If this occurs, the new network(*) will have to be configured for all to the same network in order to re-enable

* Please be sure to use new network name.

Operating Basics

computers connected

network connections.

Wi-Fi

Wireless LAN

The Wireless LAN is compatible with other LAN systems based on Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing radio technology that complies with IEEE 802.11 Wireless LAN standard (Revision B, G or N).

Setting

1. Please make sure that the Wireless Communication function is on.

2. Click Start → Control Panel → Network and Internet → Network and Sharing Center.

3. Click Set up a new connection or network.

4. Follow the wizard. You will need the name of the wireless network together with security settings. Consult the documentation accompanied with your router or ask your wireless network administrator for the settings.

Security

■ Be sure to enable encryption function. Otherwise your computer will

allow the illegal access by outsider through Wireless LAN to cause illegal instruction, eavesdropping, and loss or destruction of stored data. TOSHIBA strongly recommends the customer to enable the encryption function.

User’s Manual 4-25

■ TOSHIBA is not liable for the eavesdropping of data due to the use of

Wireless LAN and the damage thereof.

Wireless Communication Hot key

You can enable or disable RF transmission(Wireless LAN, etc.) functions on and off by pressing FN+F8. No transmissions are sent or received when the function is off.

Set the function to off in airplanes and hospitals.

Turn the computer off when you enter an airplane and check the carrier’s regulations before you use a computer on board.

LAN

The computer has built-in support for Fast Ethernet (10BASE-T/100BASETX). This section describes how to connect/disconnect to a LAN.

Do not install or remove an optional memory module while Wake-up on LAN is enabled.

The Wake-up on LAN function consumes power even when the system is off. Leave the AC adaptor connected while using this feature.

Operating Basics

LAN Cable Types

The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer’s default settings could cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures.

If you are using Fast Ethernet LAN (100 megabits per second, 100BASETX), be sure to connect with a CAT5 cable or higher. You cannot use a

CAT3 cable. If you are using Ethernet LAN (10 megabits per second, 10BASE-T), you

can connect with a CAT3 or higher cable.

User’s Manual 4-26

Toshiba C650, C650D User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Copyright

Disclaimer

Trademarks

Safety Instructions

FCC Information

EU Conformity Statement

VCCI Class B Information

Canadian Regulatory Information (Canada only)

Following Information Is Only Valid for EU-member States

ENERGY STAR® Program

Optical Disc Drive Standards

International Precautions

Table of Contents

Preface

Manual Contents

Conventions

General Precautions

Provide Adequate Ventilation

Creating a Computer-friendly Environment

Stress Injury

Heat Injury

Pressure or Impact Damage

Mobile Phones

Instruction Manual for Safety and Comfort

Getting Started

Equipment Checklist

Chapter 1

Getting Started

Connecting the AC Adaptor

Opening The Display

Turning On The Power

Starting Up for The First Time

Turni ng Off The Power

Restarting The Computer

System Recovery Options

System Recovery

The Grand Tour

Front with The Display Closed

Chapter 2

Left Side

Right Side

Back Side

Underside

Front with The Display Open

System Indicators

Keyboard Indicators

Optical Disc Drive

AC Adaptor

Chapter 3

Hardware, Utilities and Options

Hardware

Special Features

TOSHIBA Value Added Package

Utilities and Applications

Options

Optional Devices

Bridge Media Slot

Memory Expansion

Additional Battery Pack (3 Cell and 6 Cell)

Additional AC Adaptor

USB FDD Kit

External Monitor

Security Lock

Operating Basics

Using The Touchpad

Chapter 4

Using The Web Camera

Using The TOSHIBA Face Recognition

Using Optical Disc Drives

Writing CD/DVDs on DVD Super Multi (±R DL) Drive

TOSHIBA Disc Creator

TOSHIBA DVD PLAYER

Media Care

Sound System

Using The Microphone

Wireless Communications