Toshiba BV512-32 User Manual

32BV512B

DIGITAL Series

"Register your TV online at:

www.toshiba.co.uk/registration”

OWNER’S MANUAL

Get started with Freeview

Freeview gives you over 50 TV channels to play with, not to mention 25 radio stations.

Start watching all your favourite TV content today, just connect your aerial and tune in.

Keep up-to-date

New channels are launched on Freeview from time to time along with other updates to the
service. So it pays to retune your digital TV periodically to make sure your Digital TV/Radio
channels are up to date. To retune your Toshiba Digital TV, please refer to the Re-tune
section for guidance.

English

Alternatively nd out more on the dedicated Freeview website:

www.freeview.co.uk/retune

Freeview service is subject to availability. Aerial upgrade may be required.

- 1 -

Contents

English

Safety Precautions ................................................. 4

Air Circulation ..................................................... 4

Heat Damage...................................................... 4

Mains Supply ...................................................... 4

Warning ............................................................. 4

Do ....................................................................... 4

Do not ................................................................. 4

Installation and Important Information .................... 5

EXCLUSION CLAUSE........................................ 5

Important safety information .................................. 6

Removing the pedestal stand ............................. 8

The Remote Control ............................................... 9

Inserting Batteries and Effective Range of the

Remote Control................................................... 9

Connecting External Equipment ........................... 10

Connecting an HDMI® or DVI Device to the HDMI

Input.......................................................................11

To Connect an HDMI Device .............................11

To Connect a DVI Device (PC, DVD Player etc) .....11

Connecting a Computer........................................ 12

To Connect a Computer .................................... 12

Connecting a USB Memory .................................. 12

To Connect a USB Flash Drive ......................... 12

USB Memory Connection ................................. 12

Power Save Mode ................................................ 13

Environmental Information ............................... 13

Controlling the TV ................................................. 14

Switching on ..................................................... 14

Using the Remote Control ................................ 14

Using the Controls and Connections on the TV ... 14

Initial Installation .................................................. 15

Auto Tuning .......................................................... 16

Auto Tuning....................................................... 16

Manual Tuning, Analogue Fine Tuning ................. 17

Digital Manual Search....................................... 17

Analogue Manual Search ................................. 17

Analogue Fine Tune.......................................... 17

General Operation ................................................ 18

Stereo and Bilingual Transmissions.................. 18

Displaying Subtitles .......................................... 18

Viewing Main Menu .......................................... 18

Controlling Volume and Muting Sound ............. 18

Selecting Programme Positions........................ 18

Standby Notications ........................................ 18

Channel List, Sorting Programmes, Programme

Locking ................................................................. 19

Viewing Channel List ........................................ 19

Moving a Channel ............................................. 19

Deleting a Channel ........................................... 19

Renaming a Channel ........................................ 19

Locking a Channel ............................................ 19

Viewing Info Banner, Electronic Programme

Guide .................................................................... 20

Viewing Info Banner .......................................... 20

Electronic Programme Guide............................ 20

Re-tune Section .................................................... 21

Re-tuning: TOSHIBA Freeview Products .............. 21

Language Selection .............................................. 22

Language Settings ............................................ 22

Preferred ........................................................... 22

Current .............................................................. 22

Digital Settings - Parental Control, Menu Lock, Set

PIN........................................................................ 23

Viewing Parental Control Menu ........................ 23

Menu Lock ........................................................ 23

Child Lock ......................................................... 23

Set PIN ............................................................. 23

Conguring Picture Settings ................................. 24

Conguring Picture Settings ............................. 24

Picture Mode..................................................... 24

Contrast ............................................................ 24

Brightness ......................................................... 24

Sharpness......................................................... 24

Colour ............................................................... 24

Power Save Mode ............................................ 24

Backlight (optional) ........................................... 24

Noise Reduction ............................................... 24

Advanced Settings ........................................ 25

Resetting........................................................... 25

Changing Picture Format...................................... 26

Conguring PC Picture Settings ........................... 27

PC Picture Settings (*) ...................................... 27

PC Position ....................................................... 27

Autoposition ...................................................... 27

H Position ......................................................... 27

V Position.......................................................... 27

Dot Clock .......................................................... 27

Phase................................................................ 27

Conguring Sound Settings .................................. 28

Conguring Sound Settings .............................. 28

Operating Sound Settings Menu Items ............. 28

Volume .............................................................. 28

Equalizer (Only for speaker) ............................. 28

Balance (Only for speaker) ............................... 28

Headphone ....................................................... 28

Sound Mode ..................................................... 28

AVL ................................................................... 28

Dynamic Bass ................................................... 28

Digital Out ......................................................... 28

Settings Menu Operation, Conditional Access ..... 29

Conguring Your TV’s Settings ......................... 29

Viewing Settings Menu ..................................... 29

Conditional Access ........................................... 29

Language .......................................................... 29

Parental ............................................................ 29

Timers ............................................................... 29

Date/Time Settings ........................................... 29

Sources............................................................. 29

- 2 -

Other Settings ................................................... 29

Using a Conditional Access Module ................. 29

Setting Timers, Setting Date/Time ........................ 30

Timers ............................................................... 30

Setting Sleep Timer .......................................... 30

Setting Programme Timers ............................... 30

Conguring Date/Time Settings ........................ 30

Source Settings, Other Controls ........................... 31

Conguring Source Settings ............................. 31

Input Selection .................................................. 31

Conguring Other Settings - General ............... 31

Operation .......................................................... 31

Menu Timeout ................................................... 31

Scan Encrypted Channels ................................ 31

Other Controls ...................................................... 32

Application Version ........................................... 32

Blue Background .............................................. 32

Software Upgrade ............................................. 32

Hard of Hearing ................................................ 32

Audio Description.............................................. 32

Auto TV Off ....................................................... 32

Standby Search (*) .......................................... 32

Full Mode (optional) .......................................... 32

HDMI True Black (optional)............................... 32

Manual Start ..................................................... 33

Auto Start .......................................................... 33

Playing MP3 Files ............................................. 33

USB Media Browser ............................................. 33

Viewing JPG Files ............................................. 34

Slideshow Feature ............................................ 34

Video Playback ................................................. 34

Media Browser Settings .................................... 35

To Close the Media Player ................................ 35

Analogue Text Services ........................................ 36

Analogue Text Services .................................... 36

Using Text Button -TEXT .................................. 36

Acessing Sub-Pages ........................................ 36

Revealing Concealed Text ................................ 36

Holding a Page ................................................ 36

To display an initial page................................... 36

Appendix A: PC Input Typical Display Modes ....... 37

Appendix B: AV and HDMI Signal Compatibility

(Input Signal Types) .............................................. 38

Appendix C: Supported File Formats for USB

Mode..................................................................... 39

Appendix D: PIN Information ............................... 39

Specications and Accessories ............................ 40

License Information .............................................. 41

Questions and Answers ........................................ 42

Toshiba One (1) Year Limited Warranty For TV’s

(the “Products”)..................................................... 44

English

- 3 -

Safety Precautions

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equip-

English

ment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own
safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply
to the goods you have just purchased.

Air Circulation

Leave more than 10cm clearance around the television to
allow adequate ventilation. This will prevent overheating
and possible damage to the television. Dusty places should
also be avoided.

Heat Damage

Damage may occur if the television is left in direct sunlight
or near a heater. Avoid places subject to extremely high
temperatures or humidity, or locations where the temperature
is likely to fall below 5°C (41°F).

Mains Supply

The set should be operated only from a 220-240 V
AC 50 Hz outlet. DO ensure that the television is not
standing on the mains lead. DO NOT cut off the mains
plug from this equipment, this incorporates a special
Radio Interference Filter, the removal of which will

impair its performance. In the UK, the fuse tted in this

plug is approved by ASTA or BSI to BS1362. It should
only be replaced by a correctly rated and approved

type and the fuse cover must be retted. IF IN DOUBT

PLEASE CONSULT A COMPETENT ELECTRICIAN.

Warning

To prevent the spread of re, keep candles or other open

ames away from this product at all times.

Do not

DON’T remove any xed cover as this may expose danger-
ous voltages.

DON’T obstruct the ventilation openings of the equipment
with items such as newspapers, tablecloths, curtains, etc.
Overheating will cause damage and shorten the life of the
equipment.

DON’T allow electrical equipment to be exposed to dripping

or splashing or objects lled with liquids, such as vases, to

be placed on the equipment.

DON’T place hot objects or naked ame sources, such as

lighted candles or nightlights on, or close to equipment. High

temperatures can melt plastic and lead to res.

DON’T use makeshift stands and NEVER x legs with wood

screws.

DON’T leave equipment switched on when it is unattended,
unless it is specically stated that it is designed for unat­tended operation or has a standby mode. Switch off by
withdrawing the plug, make sure your family know how to do
this. Special arrangements may need to be made for people
with disabilities.

DON’T continue to operate the equipment if you are in any
doubt about it working normally, or it is damaged in any way

- switch off, withdraw the mains plug and consult your dealer.

WARNING - excessive sound pressure from earphones or
headphones can cause hearing loss.

ABOVE ALL - NEVER let anyone, especially children,
push or hit the screen, push anything into holes, slots
or any other openings in the case.

NEVER guess or take chances with electrical equipment
of any kind - it is better to be safe than sorry.

THE MAINS PLUG IS USED AS A DISCONNECTING
DEVICE AND THEREFORE SHOULD BE READILY OP­ERABLE.

Do

DO read the operating instructions before you attempt to

use the equipment.

DO ensure that all electrical connections (including the mains
plug, extension leads and inter connections between pieces
of equipment) are properly made and in accordance with

the manufacturers’ instructions. Switch off and withdraw the

mains plug before making or changing connections.

DO consult your dealer if you are ever in doubt about the
installation, operation or safety of your equipment.

DO be careful with glass panels or doors on equipment.

Note : Interactive video games that involve shooting
a “gun” type of joystick at the on-screen target may
not work with this TV.

- 4 -

Installation and Important Information

Where to install

Sturdy tie

(as short

as possible)

P Clip

P Clip

“P” Clip position on TV is dependent on model.

Locate the television away from direct sunlight and strong
lights. Soft, indirect lighting is recommended for comfortable
viewing. Use curtains or blinds to prevent direct sunlight
falling on the screen.

Place the TV on a stable, level surface that can support the
weight of the TV. In order to maintain stability and prevent
it falling over, secure the TV to a wall using a sturdy tie on
the back of the stand.

The LCD display panels are manufactured using an extreme­ly high level of precision technology; however, sometimes
some parts of the screen may be missing picture elements
or have luminous spots. This is not a sign of a malfunction.

Make sure the television is located in a position where it
cannot be pushed or hit by objects, as pressure will break

or damage the screen. Also, please be certain that small items
cannot be inserted into slots or openings in the case.

Avoid using chemicals (such as air refreshers, cleaning
agents, etc.) on or near the TV pedestal. Studies
indicate that plastics may weaken and crack over

time from the combination effects of chemical agents
and mechanical stress (such as weight of TV). Failure to follow
these instructions could result in serious injury and/or permanent
damage to TV and TV pedestal.

Cleaning the screen and cabinet…

Turn off the power, and clean the screen and cabinet with a
soft, dry cloth. We recommend that you do not use any pro­prietary polishes or solvents on the screen or cabinet as this
may cause damage.

Please take note

The digital reception function of this television is only effective in the countries listed in the “Country” section

during the rst time installation menu. Depending on country/area, some of this television’s functions may not
be available. Reception of future additional or modied services can not be guaranteed with this television.

If stationary images generated by 4:3 broadcasts, text services, channel identication logos, computer displays,

video games, on screen menus, etc. are left on the television screen for any length of time, they could become
conspicuous. It is always advisable to reduce both the brightness and contrast settings.

Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at
the 4:3 outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty.

Regular use of other size modes will prevent permanent retention.

EXCLUSION CLAUSE

Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:

i) re;

ii) earthquake;

iii) accidental damage;

iv) intentional misuse of the product;

v) use of the product in improper conditions;

vi) loss and/or damage caused to the product whilst in the possession of a third party;

vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the

owner’s manual;

viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with

associated equipment;

Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not
limited to the following, loss of prot, interruption of business, the loss of recorded data whether caused during normal opera­tion or misuse of the product.

Note: A suitable wall bracket for the size and weight must be used.

- 5 -

* Button and stand
style is dependent on
model.

English

Important safety information

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED

English

PERSONNEL.

Headphone Warning

Loud music can damage your hearing irreversibly. Do not set the volume to a high level when listening through
headphones, particularly for extended listening periods.

Information for the DVB-T function

• Any function relative to the digital television (with the DVB logo) is available only within the country or area

where such signals are transmitted. Verify with the salesperson if it is possible to receive a DVB-T signal in
the zone where you live.

• Even if the television conforms to the DVB-T specications, the compatibility to future digital DVB-T

transmissions is not guaranteed.

• Some digital television functions may not be available in some countries.

• The DVB-T system present in this device is FTA (Free to air).

• DVB is a registered trademark of the DVB Project. This logo indicates that the product is compliant with

European Digital Broadcasting.

Possible Adverse Effects on LCD Screen

If a xed (non-moving) pattern remains on the LCD screen for long periods of time, the image can become

permanently retained on the LCD TV panel and cause subtle but permanent ghost images. This type of

damage is NOT COVERED BY YOUR WARRANTY. Never leave your TV on for long periods of time while it
is displaying the following formats or images:

• Fixed Images, video game patterns, TV station logos, and websites.

IMPORTANT INFORMATION

TV Installation

If a television is not positioned in a sufciently stable location, it can be potentially hazardous due to falling.
Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using stands that are suitable for the size and weight for the TV.

• Only using furniture that can safely support the television.

• Ensuring the television is not overhanging the edge of the supporting furniture.

• Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the

furniture and the television to a suitable support.

• Not standing the televisions on cloth or other materials placed between the television and supporting furniture.

• Educating children about the dangers of climbing on furniture to reach the television or its controls.

Place the TV on a stable, level surface that can support the weight of the TV. In order to maintain stability and
prevent it from falling over, secure the TV to a wall using a sturdy tie to the clip on the back of the table top stand.

This unit has been produced according to all current safety regulations. The following safety tips should safeguard users
against careless use and the dangers related to such use.

• Although this unit has been carefully manufactured and rigorously checked prior to leaving the factory as with all electrical

appliances, it is possible for problems to develop. If you notice smoke, an excessive build-up of heat or any other unexpected
phenomena, you should disconnect the plug from the mains power socket immediately.

- 6 -

Important safety information (continued)

• Ensure that the unit is sufciently ventilated! Never place it
next to or underneath curtains!

• This set should only be connected to an 220-240V AC 50Hz

mains power supply. Do not attempt to connect it to any other
type of supply.

• Do not open this unit. An attempt to repair the unit by a
non-expert could be dangerous and potentially cause a re
hazard. All repairs must be carried out by qualied service

personnel only.

• Keep away from rodents. Rodents (and also cockatiels)
enjoy biting electric exes. They can cause a short circuit
(re hazard!) and receive a fatal electric shock.

• Always hold the plug when disconnecting the unit from
the socket outlet. Do not pull on ex. The ex can become

damaged and cause a short circuit.

• Use a soft, dry cloth to clean the unit.

• Set up unit so that no one will trip over the ex.

• This unit is recommended to be installed on stable benches

in order to avoid any danger from falling.

• Take note that children can pull the unit down from a table or
cupboard by means of its ex. Children can hurt themselves

when doing this.

• Do not use the unit near heat sources. The TV enclosure and
ex could be damaged by the intensity of the heat.

• If you intend to wall mount the unit, contact the shop where

you purchased the unit for advice, and leave the installation
work to professionals. Improper installation can cause
damage and/or injuries.

• Take fall-prevention measures

- If these measures are not taken, the unit can fall and cause
damage and/or injuries.

• When a TV stand is used,

- Ensure the unit is fully on the stand and placed in the centre.

• Avoid placing the unit on any surfaces that may be subject

to vibrations or shocks.

• To protect the unit during a thunder storm, unplug the AC

power cord and disconnect the aerial, cable and satellite
decoder/systems etc.

Caution: Do not touch the aerial connector.

• When you leave your home for a long period of time, unplug

the AC power cord for safety.

• The unit becomes warm when in operation. Do not place any

covers or blankets on the unit in order to prevent overheating.

The ventilation holes should not be blocked. Do not set up
near radiators. Do not place in direct sunshine.

• When placing on a shelf, allow at least 10 cm clearance

space around the whole unit.

• The unit must not be exposed to dripping or splashing, and
no objects lled with liquids, such as vases, shall be placed

near the apparatus.

• Liquids spilled into the unit can cause serious damage.

Switch the set off and disconnect the mains power supply,

then consult a qualied service person before attempting to

use the unit again.

• Moisture condensation occurs in the following situations:

- When you move the unit from a cold place to a warm place.

- When you use the unit in a room where the heater was
just turned on.

- When you use the unit in an area where cold air from an air
conditioner directly hits the unit.

- When you use the unit in a humid place.

• Never use the unit when moisture condensation could occur.

• Using the unit when moisture condensation exists may

damage its own internal parts. After two or three hours, the
unit will warm up and moisture will be evaporated.

• Never place hot objects or open ame sources, such as

lighted candles or night lights, on or close to the TV. High

temperatures can melt plastic and lead to res.

English

- 7 -

Removing the pedestal stand

When using a Wall Bracket

English

Please use a wall bracket appropriate for the size and weight of the LCD TV.

• • Two people are required for installation.

• • To install a wall-mount from another manufacturer.

(1) Unplug and remove any cables and/or other component connectors from the rear of the TV.

(2) Carefully lay the front of the unit face down on a at, cushioned surface such as a quilt or blanket.

(3) Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate
bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the
wall bracket.
(4) Always use the screws supplied or recommended by the wall mount manufacturer.

Note :

• The bracket shown above is a sample image. The bracket and xings are not supplied with the TV.

Removing the pedestal stand

(1) Carefully lay the front of the unit face down on a at, cushioned surface with the stand hanging over the edge.
(2) Remove the screws.
(3) After the screws are removed, hold the pedestal stand in place,then remove the pedestal stand and the
plastic moulding from the TV by removing away from the TV.

NOTE: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD

panel.

For 32BV512B model

- 8 -

SCREEN LANG SUBTTL PIP

1 2 3
4 65

97 8

0

BACK MENU

EPG FAV

SOURCE

PRESETS

SLEEP

?

INFO

+

+

-

-

V

P

OK

TOSHIBA

Simple at-a-glance reference of your remote control.

Mono-Stereo / Dual I-II

Stereo/Bilingual Transmissions

Expand (in TXT mode)

Expand (in TXT mode)

To call up text services in analogue

broadcasts and interactive services

To move up, down, left or right

To display the programme guide.

IN TV Mode: To display on-screen

IN Text Mode: To access index page.

To select input from external sources.

To move up/down between

Image size

Image size

Red button

Green button

Teletext / Mix

in digital mode.

To return to the previous level

of the on-screen menu.

Navigation Buttons

in the on screen menu.

Programme guide

To change channels

Return

Info

information.

AV / Source

the channels.

The Remote Control

Standby / On mode

To switch your TV to standby mode.

Subtitle On/Off

To enable the displaying of subtitles.

SCREEN LANG SUBTTL PIP

1 2 3
4 65

No function

Blue button

Yellow button

To select TV
programme number

Direct number entry.

97 8

SWAP
Returns to the previous programme.

MENU On/Off

To display the on screen menu.

OK / Confirm
Hold (in TXT mode)

FILE SORT FUNCTION

Picture mode selection

Display sleep timer

To alter the volume

For changing volume setting level.

To mute the sound

Press once to mute sound. Press
again to disable mute mode.

BACK MENU

EPG FAV

SOURCE

V

0

OK

INFO

-

-

SLEEP

PRESETS

?

V

+

P

+

English

RC-3910

Inserting Batteries and Effective Range of the Remote Control

Remove the back cover to reveal the battery compartment and make sure the batteries are
inserted the right way round. Suitable battery types for this remote are AAA, IEC R03 1.5V.

Do not combine a used, old battery with a new one or mix battery types. Remove dead bat­teries immediately to prevent acid from leaking into the battery compartment. Dispose of them
in a designated disposal area.

Warning: Batteries must not be exposed to excessive heat such as sunshine, re or the like.

The performance of the remote control will deteriorate beyond a distance of ve metres or

outside an angle of 30 degrees from the centre of the television. If the operating range becomes
reduced the batteries may need replacing.

- 9 -

English

Connecting External Equipment

Before connecting any external equipment, remove the mains plug from the wall socket.

Side View

COMMON INTERFACE

The Common Interface is
for a Conditional Access
Module (CAM).

DIGITAL AUDIO

Socket

SPDIF

Coax.OUT

HDMI Input

D I

D I

H M 1

H M 2

Sockets

RGB/PC
Input

Aerial
Input

USB Input

SIDE AV Video Input

SIDE AV Audio Inputs

Headphone

* a decoder
could be Digital
Satellite, Free to
Air or any other
compatible
decoder.

TV

decoder*

SCART
Socket

Aerial cable:...........................................................

Connect the aerial to the ANT. socket on the rear of the TV.

SCART lead:..........................................................

If you use a decoder* or a media recorder, it is essential
that the scart cable is connected to the TV.

Before running rst time installation, any connected devices
need to be set to standby mode.

The DIGITAL AUDIO socket enables the connection of a
suitable surround sound system.

HDMI® (High-Denition Multimedia Interface) is for using
with a DVD decoder or other equipment with digital audio and
video output. It is designed for best performance with 1080i

and 1080p high-denition video signals but will also accept

and display VGA, 480i, 480p, 576i, 576p and 720p signals.
PC format signals will also be displayed.

NOTE: Although this TV is able to connect to HDMI equipment,

it is possible that some equipment may not operate correctly.

You can use YPbPr to VGA cable (not supplied) to enable
YPbPr signal via VGA input.

WARNING: You cannot use VGA and YPbPr at the same

time.

You can use Side AV connectors to connect a camcorder

etc. to your TV.

A wide variety of external equipment can be connected to the
TV; therefore, the relevant owner’s manuals for all additional
equipment must be referred to for exact instructions.

If the TV automatically switches over to monitor external
equipment, return to normal TV by pressing the desired pro­gramme position button. To recall external equipment, press
SOURCE button repeatedly to switch between sources.

Regardless of source’s property, audio output from the DIGI­TAL AUDIO socket cannot be copied.

- 10 -

Connecting an HDMI® or DVI Device to the HDMI Input

English

The HDMI input on your television receives digital audio and
uncompressed digital video from an HDMI source device
or uncompressed digital video from a DVI (Digital Visual
Interface) source device.

This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant [1] consumer electronic
devices (such as a set-top box or DVD player with HDMI or
DVI output).

NOTE:

• Some early HDMI equipment may not work properly with

your latest HDMI TV.

• Supported Audio format: Linear PCM, sampling rate

32/44.1/48kHz.

To Connect an HDMI Device

Connect an HDMI cable (type A connector) to the HDMI ter­minal. For proper operation, it is recommended that you use
an HDMI cable with the HDMI Logo ( ).

• If your HDMI connection is capable of 1080p and/or
your TV is capable of refresh rates greater than 50Hz, you
will need a Category 2 cable. Conventional HDMI/DVI cable
may not work properly with this mode.

• HDMI cable transfers both video and audio. Separate
analogue audio cables are not required (see illustration).

• To view the HDMI device video, press SOURCE button to
select HDMI1 or HDMI2.

To Connect a DVI Device (PC, DVD Player etc)

Connect an HDMI-to-DVI cable (HDMI type A connector) to the
HDMI input socket and audio cables to the RED and WHITE
SIDE AV AUDIO inputs on the Audio/Video connection cable
supplied (see illustration).

• The maximum HDMI-to-DVI cable length is 6.6 ft (2m).

• An HDMI-to-DVI cable transfers video only. Separate

analogue audio cables are required.

SIDE AV Audio Inputs

HDMI Input

Audio Cable

(Not supplied)

Sockets

H MID 2

HDMI to DVI

Adapter Cable

(not supplied)

HDMI 1

HDMI Input
Socket
(Back)

D I

D I

H M 1

H M 2

NOTE:

To ensure that the HDMI or DVI device is reset properly, it is

recommended that you follow these procedures:

• When turning on your electronic components, turn on the
TV rst, and then the HDMI or DVI device.

• When turning off your electronic components, turn off the
HDMI or DVI device rst, and then the TV.

HDMI device

- 11 -

Connecting a Computer

English

Connecting a USB Memory

To Connect a Computer

With either an RGB/PC or an HDMI connection, you can watch

your computer’s display on the TV and hear the sound from
the TV’s speakers.

When connecting a PC to the RGB/PC input on TV, use an
analogue RGB (15-pin) computer cable and use the SIDE AV
Audio sockets with a PC audio cable (not supplied) for audio
connection (see illustration).

PC VGA Cable
(not supplied)

RGB/PC Input

(back)

PC Audio Cable

SIDE AV Audio Inputs

To use a PC, set the monitor output resolution on the PC
before connecting it to the TV. To display the optimum picture,
use the PC setting feature.

NOTE:

(not supplied)

• Some PC models cannot be connected to this
television. An adaptor is not needed for computers
with a compatible mini D-sub15-pin terminal.

• Depending on the DVD’s title and the specications

of the PC on which you are playing the DVD-Video,
some scenes may be skipped or you may not be
able to pause during multiangle scenes.

or

To Connect a USB Flash Drive

• You can connect a USB Flash Drive to your TV by

using the USB input of the TV. This feature allows

you to display/play music, photo or video les stored

in a USB stick.

• It is possible that certain types of USB devices (e.g.
MP3 Players) may not be compatible with this TV.

• You may back up your les before making any

connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not

be responsible for any le damage or data loss.

• Do not pull out USB module while playing a le.

CAUTION: Quickly plugging and unplugging USB
devices. This may cause damage to the USB device

itself.

USB Memory Connection

• Plug your USB device to the USB input of the TV.

SIDE VIEW

USB

USB MEMORY

NOTE: The USB socket has limited functionality, and Toshiba
can take no responsibility for damage to other connected
equipment.

- 12 -

Power Save Mode

Environmental Information

• This television is designed to consume less energy.

• You not only help to the environment but also you can reduce electricity consumption electricity thanks to
the energy efciency feature of this TV. To reduce energy consumption, you should take the following steps:

• You can use Power Save Mode setting, located in the Settings menu. If you set Power Save Mode as On,

the TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum level.
Note that some picture settings will be unavailable(Greyed Out) to be changed when the TV is in Power
Save Mode.

• When the TV is not in use, please switch off or disconnect the TV from the mains socket. This can also
reduce energy consumption.

• Disconnect power when going away for longer time.

• Note that annually, using the TV set in Power Save Mode has more power efciency than disconnecting

the TV from the mains socket instead of keeping stand-by mode. Therefore it is highly recommended to
activate Power Save Mode setting to reduce your annual power consumption. And also it is recommended
to disconnect the TV from the mains socket to save energy more when you do not use.

• Please helps us to help the environment by following these above steps.

• This television is designed to consume less energy.

• Harmful substances and contents that are dangerous to health, have been eliminated in its design.

• This product is designed to be recycled at the end of its service life.

• When the TV reaches the end of its service life, dispose the product in accordance with the proper recycling

process as explained on page 41.

Repair Information

Please refer all servicing to qualied personnel. Only qualied personnel must repair the TV. Please contact

your local dealer, where you have purchased this TV for further information.

English

- 13 -

Controlling the TV

A wide variety of external equipment can be connected via the sockets located on the side and back of the

English

television. Whilst all the necessary adjustments and controls for the television are made using the remote

control, the touch controls on the right side of the television may be used for some functions.

IR receiver

Standby LED

Switching on

If the standby LED is unlit, check that the mains plug is con-

nected to the power and press the button on the right side
of the television to switch the television on.

To put the television into Standby, press button on the
remote control or on the TV. To view the television, press

button again. The picture may take a few seconds to

appear.

Note: The active Standby LED may appear for a few moments
when the TV is switched off.

For energy saving:

Turning the TV off at its mains supply, or un-plugging it, will
cut energy use to nearly zero for all TV’s. This is recom­mended when the TV is not being used for a long time, e.g.
when on holiday.

Reducing the brightness of the screen will reduce energy

use. Energy efciency cuts energy consumption and thus

saves money.

NOTE: Putting the TV into standby mode, will reduce energy
consumption, but will still draw some power.

Menu OSD

Volume

Down/Up

P

Programme

Down/Up

AV/

Source

/ I

Standby

Using the Remote Control

Press the MENU button on the remote control to see the
menus.

The main menu appears as a group of icons each for a menu
option. Press the Left or Right button to select a topic.

In sub menu screen mode the menu appears as a list. Press
the Up or Down button to select a topic.

To use the options press the Up and Down buttons on the
remote control to move up and down through them and OK,
Left or Right buttons to select the required choice. Follow
the on screen instructions. The functions of each menu are
described in detail throughout the manual.

Using the Controls and Connections on the TV

Using the control buttons on the front of the TV:

• To alter the volume press + or - .

• To alter the programme position press

side of the TV.

• Press + - buttons at the same to view main menu and

To select an external input, press until the appropriate
input source is selected.

Please always refer to the owner’s manual of the equipment
to be connected for full details.

use

P

to navigate and + - to change value.

P

on the right

- 14 -

Initial Installation

Before switching on the television put your decoder and media recorder to Standby if they are connected

and ensure the aerial is connected to your television. To set up the television use the buttons on the remote

control as detailed on page 9.

English

MPORTANT: Ensure that the aerial is connected and
a Common Interface module is not inserted before

switching on the TV for the rst time installation.

1. Connect the mains plug and switch the TV to on

using the button. If the TV does not switch on,
press any numbered or button on the remote
control, then the language selection menu will

be displayed. This screen will appear the rst

time that the TV is switched on and each time
the TV is reset.

2. By pressing Up or Down button, highlight the

language you want to set and press OK button.

The following message will be displayed next:

3. By pressing Left or Right button, select the

country you want to set and press Down button
to highlight the Search Type option. Use Left or
Right to set the desired search type. Available

search types are Digital and analog, digital only
and analog only.

4. When set, Down buton to select Teletext

Language. Use Left or Right button to select
desired Teletext Language.

5. Press Down button after setting Teletext Language

option. Scan Encrypted will be then highlighted.
You can set Scan Encrypted as Yes if you want
to scan coded stations.

6. Press OK button on the remote control to continue

and the following message will be displayed on

the screen:

7. Select Yes button by using Left or Right button
and press OK button to continue.

8. The Auto tuning screen will appear and the television
will start to search for available stations. The

progress bar will move along the line. You must

allow the television to complete the search. The
following OSD will be displayed on the screen and

the television will search for the selected broadcasts:

Note: You can press MENU button to cancel.

• After the available stations are stored, Channel List

will be displayed on the screen. If you like the sort
channels, according to the LCN, please select Yes
and then press OK button (if available).

Note:

LCN = Local Channel Number used for channel
sorting”.

• Press OK button to quit channel list and watch TV.

Note: Do not turn off the TV while initializing rst time

installation.

- 15 -

Auto Tuning

English

Auto Tuning

As new services are broadcast, it will be necessary to
retune the television in order to view them.

• Auto Tuning will completely retune the television
and can be used to update the channel list. It is
recommended that Auto Tuning is run periodically
to ensure that all new services are added. All current
channels and settings, i.e. locked channels, will
be lost.

• Press MENU button on the remote control and select
Install and Retune by using Left or Right button.

Press OK button and the following menu screen
will be displayed.

• Select Automatic Channel Scan (Retune) by using
Up or Down button and press OK button. Automatic

Channel Scan options will be displayed. You can select

options by using Up or Down and OK buttons.

Auto Channel Scan Menu Operation

Digital: Searches and stores aerial DVB stations.

Analogue: Searches and stores analogue stations.

Full: Searches and stores both analogue and aerial

DVB stations

• Whenever you select an automatic search type and
press OK button, a conrmation screen will appear
on the screen. To start installation process, select
Yes, to cancel select No by using Left or Right
and OK button.

• After auto channel scan type is set and selected
and conrmed, installation process will start and

progress bar will move along. Press MENU button
to cancel process. In such a case, located channels
are not stored. The television will start to search for

all available stations. You must allow the television

to complete the search.

- 16 -

Manual Tuning, Analogue Fine Tuning

The television can be tuned-in manually using Manual Search feature.

English

Digital Manual Search

The feature is available for service engineers or
can be used for direct channel entry if the multiplex
channel is known.

• Select Manual Search from the Installation menu

and press OK.

• After selecting search type as Digital, you can enter

the multiplex or frequency number using the numeric
buttons and press OK button to search.

• Enter the multiplex number using the numeric

buttons. The television will automatically search
for that multiplex. When the multiplex is found any
channels not currently on the programme list will be
added and the programme information at the top of
the screen will be updated.

• Repeat as necessary.

Analogue Manual Search

The television can be tuned-in manually. For example:
if the television cannot be connected to a media
recorder/decoder with a SCART lead or to tune-in a
station on another System.

To allocate a programme position on the television

for a decoder and media recorder: turn the decoder
on, insert a pre-recorded lm into the media recorder
and press PLAY, then manually tune.

After selecting search type as Manual Channel
scan, you can use Up or Down button to highlight

an item and then press Left or Right button to set
an option.

Enter the channel number or frequency using the
numeric buttons. You can then press OK button
to search. When the channel is located, any new
channels that are not on the list will be stored.

Analogue Fine Tune

• Select Analogue Fine Tune from the Installation
menu by using Up or Down and OK buttons.
Analogue fine tune screen will be displayed.
Analogue Fine Tune feature will not be available if
there are no analogue channels, digital channels

and external sources stored.

• Press OK button to proceed. Use Left or Right
button to set Fine Tune. When nished, press OK

button again.

- 17 -

English

General Operation

Stereo and Bilingual Transmissions

If stereo or dual language broadcasts are transmitted, the
word Stereo or Dual will appear on the screen each time posi­tions are changed, disappearing after a few seconds. If the
broadcast is not in stereo, the word Mono will appear.

Stereo… Press LANG. to select Stereo or Mono.

Bilingual… Bilingual transmissions are rare. If they are

transmitted, the word Dual will be displayed. Choose the
required programme number, and if the word Dual appears,
press LANG. to select Dual 1, Dual 2 or Mono.

For DTV broadcasts

To view current language and for changing to an
alternative language (if available), press LANG. button.
Available options will be listed.

Displaying Subtitles

In digital broadcasts, this feature will show subtitles
on the screen in the selected language provided they
are being broadcast.

• Press SUBTTL button to activate available subtitles.
Press SUBTTL button again to turn off subtitles.

Viewing Main Menu

• Press MENU button on the remote control to view
main menu.

Controlling Volume and Muting Sound

Volume

Press V+ or V- button to adjust the volume.

Sound Mute

Press “ ” button once to turn the sound off and
again to cancel.

Selecting Programme Positions

To select a programme position use the numeric
buttons on the remote control. Programme positions
can also be selected using P+ or P- button.

Press INFO button to display the on-screen information
i.e. programme position, stereo/mono signal and
picture format.

Standby Notications

If the TV switches off while in No Signal mode, the
following on-screen message will be displayed on the

next switch-on:

If the TV switches off owing to the auto power down
feature, the following on-screen message will be

displayed on the next switch-on:

- 18 -

Channel List, Sorting Programmes, Programme Locking

You can view stored channels and sort them by using the Channel List feature.

English

Viewing Channel List

The channel order may be changed to suit your personal
preference.

• Select Channel List from the main menu and press
OK button. The following menu will be displayed:

• Select Edit Channel List to manage all stored
channels. Use Up or Down and OK buttons to select
Edit Channel List.

• Press Up or Down button for selecting a channel.
You can press P+ or P- button to move page up or

page down.

• To watch a specic channel, highlight it by using Up
or Down button. Afterwards press OK button.

• Press BLUE button to view ltering options.

• Press MENU button to exit.

Note: The channels listed are mixed at the channel
list. Channel types can be differentiated by the icons
next to them: DTV (digital tv), HD (HD TV) , ATV
(Analogue TV) ,TV (TV), RD (Radio), encrypted, lock,
and at the favourite list. Listed channels can also be

sorted by using the active channel list lter.

Moving a Channel

• Highlight the desired channel by using Up or Down
buttons.

• Select Move option in the channel list and press
OK button.

• Edit Number screen will be displayed. Enter the
desired channel number by using the numeric
buttons on the remote control. If there is a previously
stored channel on that number, a warning screen

will be displayed. Select Yes if you want to move the

channel and press OK.

• Selected channel is now moved.

Deleting a Channel

You can press GREEN button to tag/untag all
channels; YELLOW button to tag/untag channel.

• Select the channel that you want to delete and select

Delete option. Press OK button to continue.

• A warning screen will appear. Select Yes to delete,
select No to cancel. Press OK button to continue.

Renaming a Channel

• Select the channel that you want to rename and
select Edit Name option. Press OK button to

continue.

• Pressing Left or Right button moves to the previous/
next character. Pressing Up or Down button
changes the current character. Pressing the numeric
buttons ‘0...9’ replaces the highlighted character with
the characters printed above the button one by one
as the button is pressed.

• When nished, press OK button to save. Press
MENU to cancel.

Locking a Channel

You can press GREEN button to tag/untag all
channels; YELLOW button to tag/untag a single
channel.

• Select the channel that you want to lock by using
Up or Down buttons.

• Select Lock option by using Left or Right buttons.
Press OK button to continue.

• You will be asked to enter parental control PIN. Enter

the PIN number.

Note: Default PIN is set to 0000.

• Press OK button when the desired channel is
highlighted to lock/unlock the channel. Lock symbol
will be displayed next to the selected channel.

- 19 -

English

Viewing Info Banner, Electronic Programme Guide

Viewing Info Banner

• Press INFO button. The information screen will

appear giving details of the channel and programme
currently being viewed.

• Whenever you change channel, the TV displays the
broadcast picture along with an information banner at
the bottom of the screen (available only in DTV mode).
This will remain on the screen for a few seconds.

• If the selected channel is locked, you must enter the
correct four numeric code to view the channel. “Enter

PIN” will be displayed on the screen in such a case:

• Enter the 4-digit PIN number to continue.

Note: Factory set default PIN code is 0000.

Electronic Programme Guide

• Select the on-screen guide by pressing EPG button,
the guide screen will appear highlighting details of
the channel and programme currently being viewed.
This may take a few moments to appear.

• Press GREEN button to list the schedule.

• Press BLUE button to display ltering options.

Note: There are alternative views of EPG screen.
Button functions will be displayed at the bottom of
the menu screen.

• For information on a highlighted programme, press

INFO button.

• For details of other programmes currently available,
press navigation buttons to scroll up and down
or scroll left/right through the list. As channels are
selected, details of the programme currently being
broadcast will appear.

• To set the timer for a selected programme, press
OK button to select Timers menu.

• Press YELLOW button to switch to timeline view.

- 20 -

Re-tune Section

PIP

Re-tuning: TOSHIBA Freeview Products

Toshiba Digital TV

This guide can be used to help you re-tune the following product with the remote control below.

Make sure your TV is on and press 80 for the BBC News channel

English

SCREEN

1 2

4

BACK

EPG

SOURCE

-

-

SUBTTL

LANG

1 ) Press MENU and press ◄ or ► to select Install and Retune and press OK. Press
▲ or ▼ to select Automatic channel scan (Retune) to start the process.

3

65

MENU

OK

OK

978

0

MENU

OK

FAV

INFO

SLEEP

PRESETS

V

P

2 ) Select the desired search mode using ► and press OK button.

+

OK

+

OK

3 ) Whenever you select an automatic search type and press OK button, a conrmation
screen will appear on the screen. To start installation process, select Yes by using ◄
or ► and OK button.

OK

OK

4 ) After auto channel scan type is set and selected and conrmed, installation process

will start and progress bar will move along. The television will start to search for all

available stations. You must allow the television to complete the search.

* This process may affect any saved information stored on your product. Please consult your
instruction manual or contact the manufacturer using the details above.

TOSHIBA Customer Helpline: 0844 856 0730 TOSHIBA Online Support: www.toshiba.co.uk/tv-dvd-support

- 21 -

Language Selection

English

Language Settings

Using this menu you can adjust the preferred language
settings.

• Select Language from Setup menu and press OK to
view this menu. Press the RETURN button on the
remote control to exit.

Preferred

These settings will be used if available. Otherwise the
current settings will be used.

Audio: by pressing Left or Right keys change the
audio language.

Subtitle: alter the subtitle language with Left or Right
keys. The chosen language will be seen in subtitles.

Teletext: changes the preferred teletext language.

Guide: By pressing Left or Right buttons change

the guide language.

Current

Audio: if audio language is supported change the
audio language by pressing Left or Right buttons.

Subtitle: if subtitle is backed up, alter the subtitle

language with Left or Right buttons. The chosen
language will be seen in subtitles.

- 22 -

Digital Settings - Parental Control, Menu Lock, Set PIN

You can view or set parental preferences of your TV.

English

Viewing Parental Control Menu

Press MENU button and select the Settings by using
Left or Right button. Press OK button to view Settings

menu. Use Up or Down button to highlight Parental
and press OK to continue:

• A dialogue box asking for the lock key will be

displayed. The default key is set to 0000. Enter
the PIN.

• If it is incorrect, “Wrong PIN” OSD will be displayed.

If it is correct, the Parental Control menu will be

displayed:

Menu Lock

In Menu lock you can set locking for All menus, or the
Installation Menu to restrict access to these menus.
If the menu lock is disabled, there will be free access
to the menu system.

• Use Up or Down buttons to go to Menu Lock

option. Use Left or Right buttons to choose Menu
Lock Mode.

DISABLED : All menus are unlocked.

ALL MENUS : All Menus are accessible only with

the correct lock key. So the user cannot add, delete,
rename, channels, cannot set timers.

INSTALLATION MENU: Installation menu is locked.
So the user can’t add channels. Changes will be
updated after exiting ‘Conguration Menu’.

Child Lock

Press MENU button and select settings by using
Left or Right button. Press OK to continue. Use Up
or Down to select parental and then press OK to
continue. Enter the pin number. Child Lock disables
the buttons on the television. All buttons on the remote
control can still be used.

Set PIN

• Use Up or Down buttons to select Set PIN option.
Press OK to display the Set PIN window.

• Use numeric buttons to enter new pin number. You

will need to input your new pin a second time for

verication purposes.

• After typing correct PIN numbers, PIN number will

be changed.

Note: The factory default pin number is 0000, if you
change the pin number make sure you write it down
and keep it safe.

- 23 -

English

Conguring Picture Settings

You can congure picture settings of your TV by using Picture Settings menu.

Conguring Picture Settings

You can use different picture settings in detail. You can
customize current picture mode settings as desired.
For example you change items such as, Brightness,
Contrast, Colour, Sharpness and Hue.

Press MENU button and select the Picture icon by
using Left or Right button. Press OK button to view
Picture Settings menu.

Operating Picture Settings Menu Items

• Press Up or Down button to highlight a menu

item.

• Use Left or Right button to set an item.

• Press MENU button to exit.

Picture Mode

Press MENU button and select picture by using Left or
Right button. Press Up or Down to select mode. This
television offers the choice of personalising the picture
style. Cinema, Game, Dynamic and Natural are preset
options and affect settings within the television.

• In the Picture Settings menu, press Up or Down to
select Mode. Press Left or Right to select the picture
mode you prefer.

Contrast

Press MENU button and select picture by using
Left or Right button. Press Up or Down to select
contrast. Sets the lightness and darkness values of
the screen.

Brightness

Press MENU button and select picture by using Left or
Right button. Press Up or Down to select brightness.
Sets the brightness value for the screen.

Sharpness

Press MENU button and select picture by using Left or
Right button. Press Up or Down to select sharpness.
Sets the sharpness value for the objects displayed
on the screen.

Colour

Press MENU button and select picture by using Left
or Right button. Press Up or Down to select colour.
Sets the colour value, adjusting the colors.

Power Save Mode

Enables or disables the power save mode. Use Up
or Down button to select Power Save Mode. Press
Left or Right button to set Power Save Mode as On
or Off. See the section, Environmental Information in
this manual for further information on Power Save
Mode.

Note: The backlight function will be inactive if Power
Save Mode is set to on.

Backlight (optional)

This setting controls the backlight level and it can
be set to Auto, Maximum, Minimum, Medium and
Eco Mode.

Note: Backlight can not be activated in VGA or
Media Browser mode or while picture mode is set
as Game.

Noise Reduction

Sometimes some words or picture elements may
become distorted or pixelated. Using the Noise
Reduction feature reduces this effect by smoothing out
the edges. Press MENU button and select Picture by
using Left or Right button. Press Up or Down button
to select Noise Reduction.

- 24 -

Conguring Picture Settings - continued

Advanced Settings

Some additional controls in the picture menu are
grouped under the title Advanced Settings. To
view or change, first press Up or Down button
to select Advance Settings. Press OK button to
view. Advanced Settings menu controls are as the

following:

• Colour Temp: Colour Temperature increases the

‘warmth’ or ‘coolness’ of the picture by increasing

the red or blue tint. Press MENU button and select
Picture by using Left or Right button. Press Up or
Down button to select Colour Temp.

• Picture Zoom: Sets the picture size to Auto,16:9,

Subtitle,14:9, 14:9 Zoom, 4:3, Panoramic or Cinema.

Press MENU button and select Picture by using
Left or Right button. Press Up or Down button to
select Picture Zoom.

• HDMI True Black (optional): While watching from

HDMI source, this feature will be visible in the Picture

Settings menu. You can use this feature to enhance
blackness in the picture. You can set this feature as

“On” for activating HDMI True Black mode.

• Film Mode (optional): Films are recorded at a

different number of frames per second to normal
television programmes.Press “ ” or “ ” buttons to
select Film mode. Press “ ” or “ ” buttons to set
this feature Auto or Off. Turn this feature to Auto

when you are watching lms to see the fast motion

scenes clearly.

• Colour Shift: Adjust the desired colour tone. Press
MENU button and select Picture by using Left or
Right button. Press Up or Down button to select
Colour Shift.

Resetting

Press MENU button and select picture by using Left
or Right button. Press Up or Down to select reset and
press OK. This feature allows you to reset the current

Picture Settings to the default values.

English

- 25 -

Changing Picture Format

Press SCREEN button repeatedly to select between Auto(*), 16:9, Subtitle, 14:9, 14:9 Zoom, 4:3 or Cinema.

English

Note: Using the special functions to change the size of the displayed image (i.e. changing the height/width
ratio) for the purposes of public display or commercial gain may infringe on copyright laws.

Note: You can shift to screen up or down by pressing “ ”/“ ” buttons while picture zoom is selected as 14:9
Zoom, Cinema or Subtitle.

(*) When AUTO is selected, the aspect ratio of the screen is adjusted by the information provided by the
selected source (if available). The format being displayed in AUTO mode is completely independent of WSS
information which could be included in the broadcast signal or the signal from an external device.

Note: Auto mode will only be available in HDMI, YPbPr and DTV.

Use this setting when watching a

widescreen DVD, widescreen video

16:9

Subtitle

14:9

tape or a 16:9 broadcast (when

available). Due to the range of
widescreen formats (16:9, 14:9 etc.)
black bars may be visible on the top

and bottom of the screen.

When subtitles are included on a

letterbox format broadcast, this

setting will raise the picture to ensure

that all the text is displayed.

This zooms up the wide picture (14:9
aspect ratio) to the upper and lower
limits of the screen

14:9 Zoom

4:3

Cinema

This option zooms to the 14:9 picture.

Use this setting to view a true 4:3

This zooms up the wide picture

(16:9 aspect ratio) to the full

broadcast

screen.

- 26 -

.

Conguring PC Picture Settings

You can set PC Mode picture settings when using the TV as a PC monitor.

English

PC Picture Settings (*)

(*) While in VGA/PC mode, some items in Picture
menu will be unavailable. Instead, VGA mode settings
will be added to the Picture Settings while in VGA/
PC mode.

PC Picture controls

Contrast, Brightness and Colour Temperature
adjustments in this menu are identical to adjustments

dened in TV picture menu.

Select Reset and press OK button to reset the
adjustments.

Note:

For switching to VGA/PC source, press SOURCE
button on your remote control and select VGA/PC
input.

Note that VGA/PC mode menu settings are available
only while the TV is in PC source.

PC Position

Select this to display PC position menu items.

Autoposition

If you shift the picture horizontally or vertically to an
unwanted position, use this item to put the picture into
correct place automatically.

• Select the PC POSITION option from the main
menu. PC Position menu appears on the screen.

• Press the Down button to highlight Autoposition
and then press the OK button.

H Position

H (Horizontal) Position shifts the image horizontally to
right hand side or left hand side of the screen.

• In the PC POSITION menu press the Down button
until H Position is highlighted.

• Press the Left or Right button to adjust the value.

V Position

V (Vertical) Position shifts the image vertically towards
the top or bottom of the screen.

In the PC POSITION menu press the Down button
until V Position is highlighted.

Press the Left or Right button to adjust the value.

Dot Clock

Dot Clock adjustment corrects the interference
that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs or
text in smaller fonts.

• In the PC POSITION menu press the Down button
until Dot Clock is highlighted.

• Press the Left or Right button to adjust the value.

Phase

Depending on the resolution and scan frequency that
you input to the TV Set, you may see a hazy or noisy
picture on the screen. In such a case you can use this
item to get a clear picture by trial and error method.

• In the PC POSITION menu press the Down button
until Phase is highlighted.

• Press the Left or Right button to adjust the value.

- 27 -

English

Conguring Sound Settings

You can congure sound settings of your TV by using Sound Settings menu.

Conguring Sound Settings

Sound settings can be congured according to your

personal preferences.

Press MENU button and select the Sound icon by
using Left or Right button. Press OK button to view
Sound Settings menu.

Operating Sound Settings Menu Items

• Press Up or Down button to highlight a menu

item.

• Use Left or Right button to set an item.

• Press MENU button to exit.

Volume

Select Volume using Up or Down button and then use
Left or Right button to set volume level.

Equalizer (Only for speaker)

You can customize current sound mode settings. Select
the appropriate mode in accordance with the installation
location of the TV and adjust the equalizer on-screen as
desired. Press OK button to view equalizer sub-menu.

In equalizer menu, the preset can be changed to
Music, Movie, Speech, Flat, Classic and User.
Press the MENU button to return to the previous
menu.

Note: Equalizer menu settings can be changed
manually only when the Equalizer Mode is in User.

Balance (Only for speaker)

This setting is used for emphasizing left or right
speaker balance.

• Press Left or Right button to change the level of

the balance. Balance level can be adjusted between

-31 and +31.

Headphone

This setting is used to set the sound output when
headphones are connected.

• Press Up or Down button to select Headphone.

• Press Left or Right button to select Volume. Press

Right button to increase headphone volume level.
Press Left button to decrease headphone volume
level. Headphone volume level can be adjusted
between 0 and 63.

Sound Mode

This setting is used to set the sound mode. Higlight
Sound Mode by using Up or Down button. Press Left
or Right button to set.

You can select Mono, Stereo, Dual I or Dual II mode,

only if the selected channel supports that mode.

AVL

Sometimes there can be large changes in volume
when switching from a DTV 5.1ch to a DTV 2ch, an
ATV channel, or an external input. Using the AVL
feature reduces these volume differences.

• In the SOUND menu, press Up or Down to highlight
AVL . Press Left or Right button to set AVL as On

or Off.

Dynamic Bass

Dynamic Bass is used to increase bass effect of the
TV set.

Digital Out

Select Digital Out using Up or Down button and then
use Left or Right button.

- 28 -

Settings Menu Operation, Conditional Access

English

Conguring Your TV’s Settings

Detailed settings can be configured to suit your
personal preferences.

Viewing Settings Menu

Press MENU button and select Settings icon by
using Left or Right button. Press OK button to view
Settings menu.

Operating Settings Menu Items

• Press Up or Down button to highlight a menu item.

• Press OK button to select an item.

• Press MENU button to exit.

Conditional Access

Select Setting from the main menu by using Left or
Right button and press OK. Afterwards, use Up or
Down button to set Conditional Access. Press OK
to continue. This setting controls conditional access
modules when available.

Language

Press MENU button and select settings by using
Left or Right button. Press OK to continue. Use Up
or Down to select language and then press OK to
continue. Using this menu you can adjust the preferred
language settings.

Congures language settings.

Parental

Congures parental settings.

Timers

Sets timers for selected programmes. Press MENU
button and select Settings by using Left or Right
button. Press OK button to continue. Use Up or
Down button to select Timers and then press OK
button to continue.

Date/Time Settings

You can congure date/time preferences by using

this menu screen. Press MENU button and select
Settings by using Left or Right button. Press OK
button to continue. Use Up or Down button to select
Date/Time and then press OK button to continue.

Sources

Enables or disables selected source options. Press

MENU button and select Settings by using Left or
Right button. Press OK button to continue. Use Up

or Down button to select Sources and then press OK
button to continue.

Other Settings

Press MENU button and select settings by using Left
or Right button. Press OK to continue. Use Up or
Down to select other settings and then press OK to
continue. Using this menu you can adjust the preferred
language settings.

Displays other setting options of the TV set.

Using a Conditional Access Module

The Common Interface Slot, situated on the side of the
television, enables the insertion of a CAM (Conditional
Access Module) and card. These are purchased from
a service provider and allow additional subscription
broadcasts to be viewed. For more information, see
a service provider.

IMPORTANT: Insert or remove the CI module only

when the TV is SWITCHED OFF.

• In order to watch certain digital channels, a

conditional access module (CAM) is necessary. This
module must be inserted in the CI slot of your TV.

• Obtain the Conditional Access Module (CAM) and

the viewing card by subscribing to a pay channel
company, then insert those to the TV using the
following procedure.

• Insert the CAM and then the viewing card to the

slot that is located in the terminal cover at the rear
side of the TV.

- 29 -

English

Setting Timers, Setting Date/Time

• The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The CAM or
the TV terminal may be damaged if the CAM is
forcefully inserted.

Connect the TV to the mains supply, switch on and then
wait for few moments until the card is activated.

• When no module is inserted, “No Common Interface
module detected” message appears on the screen.

• Refer to the module instruction manual for details
of the settings.

Viewing Conditional Access Menu (*)

(*) These menu settings may change depending on
the service provider.

Press MENU button and select the Settings icon by
using Left or Right button. Press OK button to view
Settings menu. Use Up or Down button to highlight
Conditional Access and press OK to view menu
items.

Timers

Sets timers for selected programmes. Press MENU
button and select Settings by using Left or Right
button. Press OK button to continue. Use Up or
Down button to select Timers and then press OK
button to continue.

Setting Sleep Timer

The television can be set to turn itself Off after a
certain length of time.

• Highlight Sleep Timer by using Up or Down
button.

• Use Left or Right button to set. The timer can be
programmed between Off and 2.00 hours (120
minutes) in steps of 30 minutes.

Setting Programme Timers

This feature will set the television to go to a specic

channel at a certain time. It can be used to view
a particular programme, or by setting the mode
to daily or weekly, can be used to view a series of
programmes.

Press Down button to set timers on an event.
Programme timer function buttons will be displayed
on the screen.

Adding a Timer

• Press YELLOW button on the remote control to
add a timer. The following menu appears on the

screen:

Channel: Changes channel by using Left or Right.

Timer/Record Type: This feature is unavailable to

be set.

Date: Enter a date using the numeric buttons.
Start: Enter a starting time using the numeric

buttons.

End: Enter an ending time using the numeric

buttons.

Duration: Displays duration between the starting and

ending time.

Repeat: Sets a timer to be repeated as Once, Daily

or Weekly. Use Left or Right buttons to select an
option.

Change/Delete: Controls parental settings on timers.

• Press GREEN button to save the timer. Press RED

button to cancel.

Editing a Timer

• Select the timer you want to edit by pressing Up or
Down button.

• When nished with editing, press GREEN button to
save. You can press MENU button to cancel.

Deleting a Timer

• Select the timer you want to delete by pressing Up
or Down button.

• Press RED button.

• Select YES by using Left or Right buttons to delete

the timer. Select NO to cancel.

Conguring Date/Time Settings

You can congure date/time preferences by using

this menu screen.

• Select Date/Time in the Settings menu to congure
Date/Time settings. Press OK button.

• Use Up or Down buttons to highlight an option.

• Use Left or Right buttons to change a setting and

press MENU to exit.

- 30 -

Source Settings, Other Controls

English

Conguring Source Settings

You can enables or disable selected source options.
The TV will not switch to the disabled source options
when SOURCE button is pressed.

• Select Sources in the Settings menu and press
OK button.

• Press Up or Down buttons to select a source.

• Use Left or Right button to enable or disable the

selected source. Changes are automatically stored.

Input Selection

Use the Input Selection window if the television
does not switch over to a connected source
automatically.

• Press SOURCE button on your remote control for

directly changing sources. Select settings tab and then
use Up or Down to select Source. Press OK button.
Use then Up or Down button to highlight an input and
press Right button to select.

Conguring Other Settings - General

You can congure the settings of your TV. Select
Conguration from Setup menu and press OK to view

this menu. Press the RETURN button on the remote
control to exit.

To view general conguration preferences, select

Other Settings in the Settings menu and press OK
button.

Operation

• Press Up or Down buttons to select an item.

• Use Left or Right button to set an option.

• Press OK button to view a sub-menu.

Menu Timeout

Press MENU button and select Settings by using Left
or Right button. Press OK button to continue. Use Up
or Down button to select Other Settings and then
press OK button. Select Menu Timeout using Up or

Down button and use Left or Right button to set a

specic display timeout for menu screens.

Scan Encrypted Channels

Press MENU button and select settings by using Left
or Right button. Press OK to continue. Use Up or
Down to select others settings and then press OK.
Select Scan Encrypted using Up or Down buttons
and use Left or Right to set. When this setting is on,
search process will locate the encrypted channels as
well. If it is set as OFF manually, encrypted channels
will not be located while in automatic search or manual
search. Scan Encrypted Channel feature will always

be ON after performing rst time installation.

- 31 -

English

Other Controls

Application Version

Displays the current application version.

Blue Background

Press MENU button and select settings by using Left
or Right button. Press OK to continue. Use Up or
Down to select others settings and then press OK.
Select Blue Background using Up or Down buttons
and use Left or Right to set. If the signal is weak or
absent, the TV will automatically change to a blue
screen. To enable this, set Blue Background to On.

Software Upgrade

This feature helps to keep your TV updated. It works
automatically and searches for new information
when available. Note that this setting is inactive to

be modied.

To ensure that your TV always has the most update
information, you can use this setting. In order for the
proper operation, please ensure that the TV is set to
standby mode.

You can enable or disable automatic upgrade by

setting Automatic Scanning option.

You can manually search for new software by

selecting Scan for upgrade.

Hard of Hearing

Press MENU button and select settings by using Left
or Right button. Press OK to continue. Use Up or
Down to select others settings and then press OK.
Select Hard of Hearing using Up or Down buttons and
use Left or Right to set. If the broadcaster enables any
special signal concerning the audio, you can set this
setting as On to receive such signals.

Audio Description

Press MENU button and select settings by using Left
or Right button. Press OK to continue. Use Up or
Down to select others settings and then press OK.
Select Audio Description using Up or Down buttons.

Audio description refers to an additional narration
track for blind and visually impaired viewers of
visual media, including television and movies. The
description narrator talks through the presentation,

describing what is happening on the screen during the
natural pauses in the audio (and sometimes during

dialogue, if deemed necessary). You can use this

feature, only if the broadcaster supports that additional
narration track.

Auto TV Off

Press MENU button and select settings by using Left
or Right button. Press OK to continue. Use Up or
Down to select others settings and then press OK.

Select Auto TV Off using Up or Down buttons. You

can set the timeout value of auto off feature. After the
timeout value is reached and the TV is not operated
for selected time , the TV will go off.

Standby Search (*)

(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.

Press MENU button and select settings by using Left
or Right button. Press OK to continue. Use Up or
Down to select others settings and then press OK.
Select Standby Search using Up or Down buttons
and use Left or Right to set.

If the Standby Search is set to to on and the TV is
in standby mode, the TV will look for any changes in
the saved channels.

Full Mode (optional)

If you connect a device via HDMI or YPbPr connectors

and set 1080i/1080p resolutions, Full Mode item will
be visible.

HDMI True Black (optional)

While watching from HDMI source, this feature will be
visible in the Picture Settings menu.

Press MENU button and select settings by using Left
or Right button. Press OK to continue. Use Up or
Down to select others settings and then press OK.
Select HDMI True Black using Up or Down buttons
and use Left or Right to set.

You can use this feature to enhance blackness in the
picture. You can set this feature as “On” for activating

HDMI True Black mode.

Note: HDMI True Black On/Off feature functions only

when the HDMI device output is set to RGB.

- 32 -

USB Media Browser

This TV allows you to enjoy photo, video or music les stored on a USB device.

English

Manual Start

• To display Media Browser window, you can press

MENU button on the remote control and then select
Media Browser by pressing Left or Right button.

• Press OK button to continue. Media Browser menu
contents (depending on the contents of your USB

drive) will be displayed.

Auto Start

• When you plug a USB device, the following menu
will be displayed.

You can play music, picture and video les from a

USB memory.

• To display All les in a list, select Settings tab and

change View Style to Folder. Then go back to main
media browser screen and you will see that now
All tab will be available. Select All tab and press
OK button.

Note:
Some USB compliant devices may not be supported.
If the USB memory is not recognized after power off/

on or First Time Installation, plug the USB memory
out and power off/on the TV set. Then plug the USB
memory in again.

• Do not use a USB Hub.

• You must obtain any required permission from

copyright owners to use copyright content.

Toshiba cannot and does not grant such permission.

• Depending on the le size and amount in your USB

memory, it may take some time for loading to view.

A message will display on-screen when loading les

from the USB memory.

• Only limited types of U3 USB device are supported.
Therefore, it is suggested not to use U3 USB for
playing Media Player.

• Non-supported characters will be replaced with a
square (□).

Playing MP3 Files

To play mp3 les from a USB disk, you can use this

menu screen.

When you select Music from the main options,

available music les will be ltered and listed on this

screen.

• Use Up or Down button to highlight a le.

• Use Numeric Buttons to jump to the previous or

next le to play.

• Use RED button to stop playback.

• Press GREEN button to play all media les in the

folder starting with the selected one.

• Press YELLOW button to pause a playing le.

• Use BLUE button to play the selected le repeatedly or

in shufe mode.

• Press INFO button to display ltering options.

• Press FAV button to sort les by Title, Artist or

Album.

• Press OK to play the selected le.

• Use Left or Right button to jump previous or next

le.

- 33 -

English

USB Media Browser - continued

This TV allows you to enjoy photo, video or music les stored on a USB device.

Viewing JPG Files

To view photo les from a USB Memory, you can use

this menu screen. When you select Photos from

Media Browser, available image les will be ltered

and listed on this screen.

If you select a subtitle le and press OK button, you
can select or deselect that subtitle le. The following
menu will be displayed while playing a video le:

• Use Numeric Buttons to jump to the previous or
next le. Press OK to play.

• Press OK button to view the selected picture in

full screen.

• Press GREEN button to start a slideshow.

• Press BLUE button to activate loop/shufe.

• Press INFO button to display ltering options.

• Press FAV button to sort les by date.

• Press button to view thumbnails.

Slideshow Feature

You can use this feature to display photos on your

TV.

• Press RED button to zoom picture.

• Press GREEN button to continue with the

slideshow.

• Press YELLOW button to pause a playing le.

• Press BLUE button to activate loop/shufe mode.

• Press Left or Right button to jump to previous or
next le of slideshow.

• Use or button to rotate the picture.

• Press INFO button to activate the operations bar.

• Press RETURN to go back.

Video Playback

When you select Videos from Media Browser,

available video les will be ltered and listed on this

screen. You can use Up or Down button to select a
video le and press OK button to play a video.

Note: If you set View Style from Media Browser
Settings menu as ‘Folder’, media browser main
selection screen will include ALL tab as well.

If you select a subtitle le and press OK button, you
can select or deselect that subtitle le.

• Use Up or Down button to highlight a le.

Press OK button to start the video playback and play
the selected le. Press GREEN button to play all.

The following menu will be displayed while playing

a video le:

• Press BLUE button to stop the video playback.

• Press OK button to pause the video playback.

• Press LEFT button to go backward.

• Press RIGHT button to go forward.

• Use LANG button to set subtitle/Audio.

• Use GREEN button to jump to a time.

• Use YELLOW button to Open subtitle time

correction menu

- 34 -

USB Media Browser - continued

This TV allows you to enjoy photo, video or music les stored on a USB device.

Note:

You can set subtitles by using OK button before
starting the playback or by using LANG button during
the playback. Selected subtitles may not be displayed
correctly in some cases.

In order to display movie subtitles correctly, you should
set a “Movie Subtitle” language. See the section,
“Movie Subtitle” in “Language Settings” for selecting
Movie Subtitle language.

• Press BACK button to switch back to previous

menu.

Media Browser Settings

English

You can set your Media Browser preferences by

using the Settings dialog. Press “ ” or “ ” button to
highlight an item and use “ ” or “ ” button to set.

View Style: Sets default browsing mode.

Slide Show Interval: Sets slide show interval time.

Show Subtitle: Sets subtitle enabling preference.

Subtitle Language: Sets supported subtitle

language.

Subtitle Position: Sets subtitle position as up or
down.

Subtitle Font Size: Sets subtitle font size (max.
54pt).

To Close the Media Player

• Press MENU button on the remote control.

- 35 -

English

Analogue Text Services

This television has a multi-page text memory, which takes a few moments to load.

Analogue Text Services

Before using the text services, the required language
region must be chosen.

• Select Language from the SETTINGS menu.

• Press the Left or Right button to choose the required

language region.

• After the teletext language is selected, press MENU
button to exit.

Using Text Button -TEXT

• To view text services press . Press again to
superimpose text over a normal broadcast picture.

• Press again to return to normal viewing.

• Programmes cannot be changed until text is

cancelled.

• The rst text page shown will be the initial page.

• Any text page can be accessed by entering the 3

digit page number using the numbered buttons,
pressing the coloured buttons or pressing to
advance to the next page and to go back to the
previous page.

• Four coloured titles will appear at the base of the
screen. To access one of the four given subjects,
press the relevant coloured button on the remote
control.

• For further information on your particular text
system(s), see the broadcast text index page or,
consult your local Toshiba dealer.

Below is a guide to the functions of the remote control
text buttons.

Acessing Sub-Pages

If a text page has sub-pages, press and enter the sub­page numbers 01,02,03 etc. which can be selected
using Left/ Right buttons at the bottom of the text page
under the coloured links.

Revealing Concealed Text

To discover the solutions on quiz and joke pages press
the INFO button.

Holding a Page

At times it is convenient to hold a page of text. Press
OK and HOLD will appear in the top left of the screen.
The page will be held on screen until the button is
pressed again.

To display an initial page

Press INFO to access an initial page. The one
displayed is dependant on the broadcaster.

- 36 -

Appendix A: PC Input Typical Display Modes

1

2

5

9

10

12

13

15

16

18

19

20

21

22

23

The following table is an illustration of some of the typical video display modes. Some, due to the display
native resolution, are scaled automatically to enable correct image to be displayed.

Your TV may not support different resolutions. Supported resolution modes are listed below.

If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.

Index Resolution Frequency

640x350 85 Hz

640x400 70 Hz

60Hz-66Hz-72Hz

-75Hz-85Hz

56Hz-60Hz-70Hz-72Hz

-75Hz-85Hz

60Hz-66Hz-70Hz-72Hz

-75Hz

60Hz-70Hz-75Hz

-85 Hz

60Hz-75Hz-85Hz

60Hz-75Hz-85Hz

75Hz-85Hz

65Hz-75Hz

11

14

17

3

4

6

7

8

640x480

800x600

832x624 75 Hz

1024x768

1152x864

1280x768 60 HzA

1280x768 60 HzB

1280x768 75Hz-85Hz

1280x960

1280x1024

1360x768 60 Hz

1400x1050 60 HzA

1400x1050 60 HzB

1400x1050

1400x900

1600x1200 60 Hz

1680x1050 60 Hz

1920x1080 60 HzA

1920x1080 60 HzB

1920x1200 60HzA

1920x1200 60Hz

English

- 37 -

Appendix B: AV and HDMI Signal Compatibility (Input Signal Types)

Source

Supported Signals

English

PAL 50/60

EXT

(SCART)

Side AV

YPbPr

HDMI1

HDMI2

NTSC 60

RGB 50

RGB 60

PAL 50/60

NTSC 60

480i 60Hz

480p 60Hz

576i 50Hz

576p 50Hz

720p 50Hz

720p 60Hz

1080i 50Hz

1080i 60Hz

1080p 50Hz

1080p 60Hz

480i 60Hz

480p 60Hz

576i 50Hz

576p 50Hz

720p 50Hz

720p 60Hz

1080i 50Hz

1080i 60Hz

1080p 24Hz

1080p 25Hz

1080p 30Hz

1080p 50Hz

1080p 60Hz

Note: In some cases a signal on the LCD TV may not be displayed properly. The problem may be an
inconsistency with standards from the source equipment (DVD, Set-top box, etc.). If you do experience such
a problem please contact your dealer and also the manufacturer of the source equipment.

- 38 -

Appendix C: Supported File Formats for USB Mode

File

Extension

Format

Remarks

Video

Audio

(Maximum resolution/Bit rate etc.)

3

Media

.mpg, .mpeg MPEG1, 2 MPEG Layer 1/2/3

.dat MPEG1, 2

.vob MPEG2

Movie

.avi

Music .mp3 -

Photo

Subtitle

.jpg .jpeg

.bmp - max WxH = 9600x6400 3840000bytes

.sub

.srt

MPEG2 PCM/MP3

Xvid 1.00, Xvid 1.01,
Xvid 1.02, Xvid 1.03,

Xvid 1.10-beta1/2

MPEG2

PCM

MPEG 1 Layer 1 / 2

(MP3)

Baseline JPEG max WxH = 15360x8640 4147200bytes

Progressive JPEG max WxH = 1024x768 6291456bytes

- -

MAX 1920x1080 @ 30

MAX 1920x1080 @ 30

32kbps ~ 320kbps(Bit rate)

32kHz ~ 48kHz(Sampling rate)

Appendix D: PIN Information

Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the
mains plug from the wall socket. Signal information for Mini D-sub 15 pin connector

Pin No. Signal name Pin No. Signal name Pin No. Signal name

1 R 6 Ground 11 NC

2 G 7 Ground 12 NC

B 8 Ground 13 H-sync

4 NC* 9 NC 14 V-sync

5 NC 10 Ground 15 NC

* NC = not connected

p 20Mbit/sec

p 20Mbit/sec

English

- 39 -

Specications and Accessories

32BV512B

Broadcast Systems/Channels

English

DVB-T, MPEG2, DVB-T, MPEG4

Video Input PAL, SECAM, NTSC 4.43

Stereo Nicam

External Connections

1-SCART 1 Input 21-pin SCART RGB, A/V

2-YPbPr (via VGA) Input Mini D-Sub 15-Pin Analogue

3-SIDE AV Input Side AV Cable input Video + Audio L + R

4-HDMI 1/2 Input Type A

5-PC Input Mini D-Sub 15-Pin Analogue RGB Signal

6-Digital Audio Output S/PDIF (Coaxial)

USB Port Media Browser Interface Version: USB 2.0

USB Class: Mass Storage

File System: FAT32

Headphone Socket 3.5mm stereo

Operating Conditions Temperature 5°C - 35°C (41°F - 94°F)

Humidity 20 - 80% (non-condensing)

Supplied Accessories Remote Control

2 batteries (AAA,IEC R03 1.5V)

Four screws

Stand xing cover

P Clip

Energy Efciency Class

Visible Screen Size (approx.)

On Mode Power Consumption (approx.) (*)

Annual Power Consumption (approx.) (**)

Standby Power Consumption (approx.)

Screen Resolution (pixels)

Display

Sound Output (at 10% distortion)

Power Consumption Model (approx.)

Weight TV with stand

Gross weight

TV without stand

B

80cm / 32”

53W

77 kWh

< 0.50 W

1366 x 768

16:9

2 x 6

150W

12 kg

15 kg

10.5 kg

(*) Tested in accordance with IEC 62087-BD in default settings.

(**) Energy consumption 77 kWh per year, based on the power consumption of the television operating 4 hours
per day for 365 days. The actual energy consumption will depend on how the television is used.

Unit Dimensions (Approximate)

Specication is subject to change without notice.

VESA Compliant for Simple Optional Wall Mounting

A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm)

32BV512B 788.6 516.8 204.8 89.2 557.2 200 100

- 40 -

License Information

• HDMI, the HDMI logo, and High-Denition Multimedia Interface are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other countries.

• DVB is a registered trademark of the DVB Project.

• [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth

digital content protection, which is being standardized for reception of high-denition video signals.

Because this is an evolving technology, it is possible that some devices may not operate properly with the
television.

MP3 licence letter

MPEG Layer-3 audio coding technology licensed from Fraunhofer LLS and Thomson.

AVC licence letter

THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFORIO LICENSE FOR THE PERSONAL
AND NON-COMMERCIAL USE OF A CONSUMER TO (I)ENCODE VIDEO IN COMPLIANCE WITH THE AVC

STANDARD (“AVC VIDEO”) AND/OR (II)DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER
ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO

PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED

FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA,L.L.C. SEE
HTTP://WWW.MPEGLA.COM

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of
Dolby Laboratories.

Cleaning the screen and cabinet...
Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary
polishes or solvents on the screen or cabinet as this maycause damage.

Disposal...

The following information is only for EU-member states:

Disposal of products
The crossed out wheeIed dust bin symbol indicates that products must be collected and disposed of separately from
household waste. Integrated batteries and accumulators can be disposed of with the product. They will be separated
at the recycling centres.
The black bar indicates that the product was placed on the market after August 13, 2005.
By participating in separate collection of products and batteries, you will help to assure the proper disposal of
products and batteries and thus help to prevent potential negative consequences for the environment and human
health.
For more detailed information about the collection and recycling programmes available in your country, please
contact your local city office or the shop where you purchased the product.

Disposal of batteries and/or accumulators
The crossed out wheeled dust bin symboI indicates that batteries and/or accumulators must be collected and
disposed of separately from household waste.
If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or
cadmium (Cd) defined in the Battery Directive (2006/66/EC), then the chemical symbols for lead (Pb), mercury (Hg)
and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.
By participating in separate collection of batteries, you will help to assure the proper disposal of products and
batteries and thus help to prevent potential negative consequences for the environment and human health. For more
detailed information about the coIIection and recycling programmes available in your country, please contact your
local city office or the shop where you purchased the product.

EU

Hg Cd Pb

English

- 41 -

Questions and Answers

A

A

You can select via the Channel List

Checkthe correct

put has beenchose

Check the correct

input

has been chosen

them

forg

English

Questions and Answers

Why is there no sound or picture?

Q

Check the TV is not in standby mode.
Check the mains plug and all mains connections.

A

Why is there a picture but no sound?

Q

Check the volume has not been turned down or
that sound mute has not been selected.

A

What can cause a poor picture?

Q

Interference or a weak signal. Try a different TV
station.

A

Why doesn't the video/DVD being played show

Q

on screen?

Make sure the VCR or DVD player is connected to
the TV as illustrated in the beginning chapters, then

A

select the correct input by pressing SOURCE .

Why is the VCR/DVD picture in black and white?

Q

in

Why is there a good video picture but no sound?

Q

Check the SCART lead connection.

A

Why doesn't the remote control work?

Q

Check the batteries aren't exhausted or inserted
incorrectly.

A

Why don't the controls of the TV work?

Q

Check that CHILD LOCK is not selected.

A

Why is the sound only coming from one speaker

Q

when stereo sound is selected?

Check that the balance in the SOUND menu hasn't
been set to one side.

A

Why are there problems with analogue text

Q

service?

Good performance of the analogue text depends
on a good strong broadcast signal. This normally

A

requires a roof or loft aerial. If the text is
unreadable or garbled, check the aerial. Go to the
main index page of the analogue text service and
look for the User Guide.

What is DVB-T?

Q

Digital Video Broadcast via an aerial/antenna.

A

How are radio channels selected?

Q

n.

.

You can select them via the Channel List.

What can be done if the PIN number has been

Q

A

Q

A

otten?

You can reset TV and perform first time

installation. Ensure that no-one else can

use this by removing the Owner’s Manual.

Why are there horizontal stripes and/or blurred
images on the screen when in PC mode?

The Phase may need adjustment. Select PC
Settings and highlight Phase and adjust until the
picture is clear.

.

- 42 -

Questions and Answers

Below are the answers to some of the most common queries. For more information go to www.toshiba.co.uk

English

Why doesn't the Media Browser feature operate?

Q

Make sure that USB is connected correctly.
Incorrect behaviour may occur with a USB Hub

A

connection.

Why is the digital channel locked?

Q

Parental control is activated. Check parental settings.

A

Why are some encrypted digital channels

Q

unavailable?

Your subscription needs upgrading. Contact your

service provider.

A

Why when digital subtitles have been selected

Q

are they not showing on screen?

Subtitles are not currently being transmitted by the
broadcaster.

A

Why is the soundtrack in English when a

Q

different audio language has been selected?

The programme is currently being broadcast with
an English soundtrack only.

A

Why dees the active standby LED sometimes

Q

take longer to go out?

When put into standby the television's active
standby will automatically search all available

A

channels for downloads, provided Automatic
Download is enabled. The time it takes to do this
may vary.

EU Conformity Statement

“This product is marked with “CE” and complies therefore with the applicable harmonized European standards listed
under the Low Voltage Directive 2006/95/EC and the EMC Directive 2004/108/EC.”

Responsible for CE-marking is TOSHIBA INFORMATION SYSTEMS (U.K.) LTD,
Toshiba Court, Weybridge Business Park, Addlestone Road, Weybridge,
Surrey, KT15 2UL, United Kingdom

- 43 -

Toshiba One (1) Year Limited Warranty For TV’s (the “Products”)

English

1. THE TERMS OF THIS WARRANTY DO NOT AFFECT YOUR STATUTORY RIGHTS.

2. Your Product is warranted to be free from defects in material and workmanship arising under normal use and service, for

one (1) year from the date of original purchase when brand new (“Warranty Period”).

3. If a failure or defect covered by the warranty arises and a valid claim is received by Toshiba within the Warranty Period,

Toshiba shall at its option and to the extent permitted by law, repair or replace the machine or any components free of charge
or refund the purchase price of the Product.

4. This warranty is valid ONLY in relation to the Product for which your warranty has been registered. It is the Product that

is warranted rather than the owner.

5. Toshiba, its authorised resellers (“Authorised Resellers”) and authorised service providers (“Authorised Service Providers”)

reserve the right to request proof of purchase (e.g. a paid and dated invoice) showing model and serial number before

providing any warranty conrmation.

6. Any Product or component repaired or replaced under the warranty shall be subject to the balance of the original Warranty

Period applying to the Product or component, or three months from the date of replacement or repair, whichever is the greater.

All Products and components replaced under warranty shall become Toshiba’s property. Where a refund is given, the Product
for which the refund is provided must be returned to Toshiba and becomes Toshiba’s property.

7. This warranty shall not apply: a) to extrinsic cause or cosmetic damage, including but not limited to scratches and dents;

b) to damage caused by use with non-Toshiba products; c) to damage caused by accident, abuse, misuse, liquid spill or

submersion, ood, re, earthquake or other external causes; d) to damage caused by operating the product outside the permitted
or intended uses described by Toshiba; e) to a product or part that has been modied to alter functionality or capability without

the written permission of Toshiba or f) to any failure or defect attributable to any neglect or wear and tear. This also applies
to the hardware casing. Should you claim a repair that is not covered under the warranty terms, any of Toshiba, Authorised
Reseller or the Authorised Service Provider may charge you the costs of the repair.

8. This warranty shall be inapplicable if failure of the Product or component has resulted from service, maintenance or repair

other than by Toshiba, an Authorised Reseller or Authorised Service Provider, or if the Product or component labels/serial
numbers have been altered or obscured.

9. Toshiba shall not be liable for any transport/delivery costs incurred in returning the Product or components to an Authorised

Reseller or Authorised Service Provider in support of a warranty claim.

10. Except for the express warranty provided, Toshiba, its Authorised Resellers or Authorised Service Provider do not issue

any warranty or guarantee for your Product.

11. Toshiba expressly disclaims and excludes all conditions, warranties and other terms with regard to the Product, including,

but not limited to, in every case whether express or implied by statute, common law, custom, collaterally or otherwise, to
the fullest extent permitted by applicable law. In particular, but without limit to the generality of the foregoing exclusion, any

conditions, warranties and other terms as to merchantability, satisfactory quality, tness for a particular purpose, hidden or

latent defects, ownership of any software, as to price and / or non-infringement of third party rights are excluded whether in
contract or tort. Any implied warranties that may be imposed by applicable law are limited in duration, subject to such applicable
law, to the term of the express limited warranty given by Toshiba. No Toshiba reseller, agent or employee is authorised to

make any modication, extension or addition to this warranty. If any term is held to be illegal or unenforceable, the legality

or enforceability of the remaining terms shall not be affected or implied.

12. Also, Toshiba does not warrant that operation of the Product will be uninterrupted or error free. You must read and follow

all set-up and usage instructions in the Product safety instruction and user’s manuals, as provided. If you fail to do so, the

Product may not function properly. Even if you follow the instructions, Toshiba does not warrant that compliance with the
instructions in the above manuals will ensure that the Product will function properly in all circumstances.

13. To the maximum extent permitted by applicable law, and except as provided herein in no event shall Toshiba, Authorised

Resellers, Authorised Service Providers or Toshiba’s supplier be liable for any direct, special, incidental or consequential

damages resulting from any breach of warranty, condition, strict liability or tort or under any other legal theory, including but

not limited to loss of use; loss of revenue; loss of actual or anticipated prots (including loss of prots on contracts); loss of

the use of money; loss of anticipated savings; loss of business; loss of opportunity; loss of goodwill; loss of reputation; loss of,
damage to or corruption of data; or any indirect or consequential loss or damage howsoever caused including the replacement
of equipment and property. The foregoing limitation applies even if Toshiba, Authorised Resellers, Authorised Service Providers

or Toshiba’s supplier, have been advised of the possibility of such damages or of any claim by any third party. In any event,
any liability of Toshiba Authorised Resellers, Authorised Service Providers or Toshiba’s supplier which is not excluded shall

be limited to the purchase price of the Product. However, Toshiba shall accept liability for personal injury or death caused by
or arising from its negligence or from fraudulent misrepresentation and as otherwise required by applicable law.

14. This warranty shall be governed by and construed in accordance with the laws of England and Wales. You agree to submit

to the exclusive jurisdiction of the courts of England over any claim, matter or dispute arising under or in connection with this
warranty (including as to its validity) or the legal relationships established by this warranty.

NOTE - Toshiba reserves the right to alter or cancel this program at any time without prior notice.

- 44 -

If you wish to view the advanced functions but do not have access to a computer or
the internet then please contact your nearest owner's manual Helpline number from
the numbers shown below.

Country name locally Contact Number

Österreich 0810 - 144 122 (7,3 ct/min aus dem Festnetz

der Telekom Austria, Mobil ggf. abweichend)

Belgique / Belgie 02 391 01 01
България 0294 21141
Hrvatska 01 653 9737
Κύπρος 22 872 111
Česká republika 323 204191
Danmark 80 88 93 38
Eesti Vabariik 69 97 800
Suomen tasavalta 0800 77 35 03
France 09 69 32 64 84
Deutschland 0431 24 89 45 50

(Ortstarif, abweichender Mobilfunktarif moglich)

Gibralter 200 76334
Ελληνική 210 9554298
Magyar Köztársaság 23 428 870
Ísland 00 45 80 88 93 38
Yisrā'el 03 953 5900
Italia 039 609 9301
Latvijas 00 372 69 97 800
Lietuvos 00 372 69 97 800
Luxembourg 00 32 2 391 01 01
Moldova 00380 443 511 317
Nederlanden 00 32 2 391 01 01
Norge 800 573 57
Polska 0 71 796 95 05
Portugal 707 265 265
Republic of Ireland 01 246 7780
România 021 3169 393
Россия 8 800 100 05 05
Slovensko 0042 323 204191
España 902 33 22 34
Sverige 0201 70 16 00
Schweiz / Suisse 0900 57 58 58 (CHF 1.49 / Min.)
Türkiye 0 212 340 6080
U.K. 0844 856 0730
Україна 8(044) 351 13 17

Please note the telephone number only applies to advanced owner's manual
enquiries and not general operation of the TV.

"Printed on Recycled Paper" "100% Chlorine free"