Toshiba BDX2400 User Manual

Blu-ray DiscTM Player

English

BDX2400KE BDX3400SE

Owner’s Manual

Contents

1 Important .......................................................................................... 3-4

English

Safety and important notice ..........................................................................3

Disposal of your old product and batteries .......................................................3

Notice for Trademark .....................................................................................4

2 Your Product ....................................................................................... 5-7

Regions Codes ..............................................................................................5

Product overview ...........................................................................................6

Remote control ..............................................................................................7

3 Connections ........................................................................................ 8-9

Connecting to a TV ........................................................................................8

Connecting to the digital ampliﬁer/receiver ......................................................8

Connecting to network ...............................................................................8-9

Connecting USB device ..................................................................................9

Connecting Power ..........................................................................................9

4 Preparation ...........................................................................................10

Prepare the remote control ..........................................................................10

Setting up the player ...................................................................................10

5 Playback .......................................................................................... 11-13

Playback Functions .................................................................................11-13

6 Customizing .................................................................................... 14-17

Audio ..........................................................................................................14

System .................................................................................................14-15

Network ................................................................................................15-16

Language ....................................................................................................16

Security ......................................................................................................16

Information .................................................................................................16

Playback ................................................................................................16-17

Display .......................................................................................................17

7 Network functional description ...................................................... 18-19

8 Speciﬁ cations ........................................................................................20

9 Troubleshooting .............................................................................. 21-22

10 Glossary .......................................................................................... 23-24

11 License Information ........................................................................ 25-51

1 Important

Safety and important notice

Responsible for CE-marking is TOSHIBA EUROPE GMBH Hammfelddamm 8, 41460 Neuss, Germany

Warning:

• Risk of overheating! Never install the product in a conﬁ ned space. Always leave a space of at least 10cm around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product.

• Never place the product, remote control or batteries near naked ﬂ ames or other heat sources, including direct sunlight.

• Only use this product indoors. Keep this product away from water, moisture and liquid-ﬁ lled objects.

• Never place this product on other electrical equipment.

• Keep away from this product during lightning storms.

• Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

LASER CAUTION:

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION:

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. DO NOT STARE INTO BEAM.

LOCATION:

INSIDE, NEAR THE DECK MECHANISM.

EU Conformity Statement

This product is labeled with the CE Mark in accordance with the related European Directives, notably Low Voltage Directive 2006/95/EC, Electromagnetic Compatibility Directive 2004/108/ EC and RoHS Directive 2011/65/EU. Furthermore the product complies with the Ecodesign Directive 2005/32/EC (EuP) and 2009/125/EC (ErP) and its related implementing measures.

Disposal of your old product and batteries

Following information is only valid for EUmember States: Disposal of products

The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be separated at the recycling centres. The black bar indicates that the product was placed on the market after August 13, 2005. By participating in separate collection of products and batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health. For more detailed information about the collection and recycling programmes available in your country , please contact your retailer where the product was purchased.

Disposal of batteries and/or accumulators

The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed of separately from household waste. If the battery or accumulator contains more than the speciﬁ ed values of lead (Pb), mercury (Hg), and/or cadmium (Cd) deﬁ ned in the Battery Directive (2006/66/EC), then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol. By participating in separate collection of batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health. For more detailed information about the collection and recycling programmes available in your country , please contact your retailer where the product was purchased.

Pb, Hg, Cd

English

If this product has an integrated Wireless LAN feature, the Radio Equipment and Telecommunications Terminal Equipment Directive 1999/5/EC is also applicable.

Notice for Trademark

English

AVCHD Related Logos are trademarks of Panasonic Corporation and Sony Corporation.

Blu-ray Disc and the logos are trademarks of the Blu-ray Disc Association.

ABOUT DIVX VIDEO: DivX a subsidiary of Rovi Corporation. This is an ofﬁ cial DivX Certiﬁ ed® device that plays DivX video. Visit divx.com for more information and software tools to convert your ﬁ les into DivX videos.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certiﬁ ed order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

DivX®, DivX Certiﬁ ed® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

DivX Certiﬁ ed® to play DivX® video up to HD 1080p, including premium content.

, Blu-rayTM, BD-LiveTM, BONUSVIEWTM,

is a digital video format created by DivX, LLC,

device must be registered in

‘DVD Video’ is a trademark of DVD Format/Logo Licensing Corporation.

The terms HDMI and HDMI High-Deﬁ nition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Oracle and Java are registered trademarks of Oracle and/or its afﬁ liates. Other names may be trademarks of their respective owners.

Picasa is a trademark of Google Inc. YouTube is a registered trademark of Google Inc.

The Wi-Fi CERTIFIED Logo is a certiﬁ cation mark of the Wi-Fi Alliance. The Wi-Fi Protected Setup Identiﬁ er Mark is a mark of the Wi-Fi Alliance.

The Wi-Fi DirectTM is a mark of the Wi-Fi Alliance. The MiracastTM is a mark of the Wi-Fi Alliance.

Note:

- For BDX3400SE model only.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTSHD, the Symbol, & DTS-HD and the Symbol together are registered trademarks & DTS-HD Master Audio | Essential is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

2 Your Product

Regions Codes

Both the Blu-ray Disc coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play. The Region Number for this Blu-ray DiscTM Player is described on the rear panel of the Blu-ray Disc player.

Region

U.S.A. and Canada regions

U.K., Europe regions and Japan

Player and the discs are

DVD discs that can

be played

Region

North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia

Europe, Greenland, French territories, Middle East, Africa, Australia and New Zealand.

India, China, Russia, Central and South Asia.

Blu-ray™ discs that

can be played

English

Asia Paciﬁ c, Taiwan, Korea

Australia, New Zealand, Latin America

Russia and India regions

China, Calcos Islands, Walls and Futuna Islands

Feature highlights

High-Deﬁ nition entertainment Watch high-deﬁ nition content disc with HDTV (High Deﬁ nition Television). Connect it through a high speed HDMI cable. You can enjoy excellent picture quality up to 1080p resolution with the frame rate of 24 frames per second with progressive scan output.

BD-Live

Connect this player to the movie studios website via the LAN jack to access a variety of up-to-date content (e.g. refreshed previews and exclusive special features).

Blu-ray Disc

Blu-ray DiscTM Java(BD-J) Application the BD-ROM format supports Java for interactive functions. “BD-J” offers content providers almost unlimited functionality when creating interactive BD-ROM titles.

Java

Product overview

English

Main unit

123456

No. Control Function

1 Disc compartment Load a disc into the disc drive. 2 IR Sensor 3

4 5

7 USB jack

Point the remote control at the IR sensor. Open or close the disc compartment. Stop playback. Playback/pause.

Turn the power on (indicator grows green) or restores the unit to the standby mode (indicator is off).

Connect a USB ﬂ ash drive.

1234

No. Control Function

1 AC power cord Connect to a standard AC outlet. 2 COAXIAL DIGITAL jack

3 HDMI OUT jack

4 LAN jack

Output digital audio signals when connecting the coaxial digital cable. Output video/audio signals to a connected TV, monitor or AV receiver/

ampliﬁer. Connect to a TV, monitor or AV receiver/ampliﬁer equipped with HDMI input.

Use this to connect to a network with an always-on broadband connection. It is reserved for future usage of BD-Live™, bonus content, Media Server Search, Picasa, YouTube and MiracastTM.

Remote control

OPEN/CLOSE

• Open/Close the disc tray

• Press to enter track/chapter

title numbers/password directly

• To goto a title, chapter, track or

bookmark and program you set

• Press to enter HOME screen

• Advance the picture frame by

• To access JPEG thumbnail view

subtitles available in your disc

Number Buttons

GOTO

playing time

• To clear an entry or the

• Fast reverse/fast forward

• Start/Pause playback

• To enter the setup screen

• To exit the current menu

frame during pause mode

• Do a slow forward during

• To access program list

• To zoom out/in

• To bookmark at any point

• To display subtitle; press

repeatedly to select different

• To repeat from A to B

Clear

REV/ FWD

PLAY/PAUSE

HOME

SETTING

EXIT

STEP/SLOW

normal playback

PROGRAM

DIGEST

during playback

ZOOM

BOOKMARK

during playback

SUB (Subtitle)

REPEAT A-B

REMOTE SIGNAL EMITTER

• Point remote control to the sensor on the front panel

POWER

• To switch the Blu-ray Disc™ Player to ON or standby mode

OSC

• To access On Screen Control menu

TOP MENU

• To display the disc title during playback

PIP (Picture in Picture)

• Switch on or off the secondary video

POP UP/MENU

• To display a menu included on many Blu-ray Disc™/DVD video discs

SKIP

• Skip to previous/next chapter/ title/track

STOP

• Stop playback

/ / /

• Navigation/Cursor buttons for moving to the left/right/up/down

• Press / during JPEG playback to rotate the current photo track, but the JPEG playback will be paused.

• Acknowledge/Conﬁ rm menu selection

RETURN

• Return to previous menu

HOME

• Press to enter HOME screen

AUDIO

• To select the sound stream; press repeatedly to select different audio streams available in your disc

2nd. AUDIO

• Switch on/off the secondary audio of secondary video (PIP)

ANGLE

• Switch the camera angle during playback

REPEAT

• Selects various repeat mode

DISPLAY

• Press to display operating status

English

3 Connections

Make the following connection to use this product.

English

Connecting to a TV

Connect a HDMI cable from the HDMI output jack on this product to the HDMI input jack on the TV. A HDMI cable carries both video and audio signals. If you wish to use TV speakers, you do not need to make an additional audio connection.

HDMI cable

(not supplied)

Connecting to the digital ampliﬁ er/receiver

Route the sound from this player to other device to enhance audio output. Connect a coaxial cable from the COAXIAL jack on this product to the COAXIAL jack on the device.

Digital Ampliﬁ er

/receiver

Option 1: Connecting via wired router

Connect the network cable from the LAN jack on the product to the LAN jack on the network system.

hub or broadband router

LAN cable

(not supplied)

Notes:

• Do not connect a modular phone cable to the LAN jack.

• Follow the connec on conﬁ gura ons instruc ons from your telecommunica on carrier or Internet service provider.

Option 2:

• Connecting via a Wi-Fi® adapter and

wireless access point or router (for BDX2400KE model)

Connect the TOSHIBA’s USB Wi-Fi USB jack on the right side of the Blu-ray Disc™ player, and set the wireless network options. No physical connection to the wireless router is necessary.

adapter to the

Digital audio coaxial cable

(not supplied)

Connecting to network

Option 1: Connecting via wired router Option 2:

• Connecting via a Wi-Fi wireless access point or router (for BDX2400KE model)

• Connecting via the built-in Wi-Fi® device and a wireless access point or router (for BDX3400SE model)

adapter and

Wireless

access point

TOSHIBA’s Wi-Fi

(not supplied)

1. Conﬁ gure your player to access the wireless access point or router.

2. The network conﬁ guration and connection method may vary depending on the equipment in use and the network environment. Your Blu-ray Disc™ player is equipped with an IEEE

802.11n wireless module, which also supports the 802.11a/b/g/n standards. For the best wireless performance, we recommend using an IEEE 802.11n certiﬁ ed Wi-Fi point or wireless router).

adapter

network (access

Notes:

• USB Wi-Fi® adapter is required for a wireless connec on.

• This unit is compa ble with TOSHIBA’s USB Wi-Fi® adapter only (Model name:WLM-12EB1).

• For detailed informa on, please refer to the device’s User’s Guide for WLM-12EB1.

• Connecting via the built-in Wi-Fi

and a wireless access point or router (for BDX3400SE model)

Your Blu-ray Disc™ player has an integr ated Wi-Fi device and antenna. No physical connection to the wireless router is necessary.

1. Conﬁ gure your player to access the wireless

access point or router.

2. The network conﬁ guration and connection

method may vary depending on the equipment in use and the network environment. Your Blu-ray Disc™ player is equipped with an IEEE

802.11n wireless module, which also supports the 802.11a/b/g/n standards. For the best wireless performance, we recommend using an IEEE 802.11n certiﬁ ed Wi-Fi® network (access point or wireless router).

Notes:

• You must use a wireless IP sharer that supports IEEE 802.11a/b/g/n. (n is recommended for stable opera on of the wireless network.)

• Wireless LAN, in its nature, may cause interference, depending on the use condi on (AP performance, distance, obstacle, interference by other radio devices, etc.).

• Set the wireless IP sharer to Infrastructure mode. Adhoc mode is not supported.

• When applying the security key for the AP (wireless IP sharer), only the following is supported.

1. Authen ca on Mode: WPAPSK, WPA2PSK

2. Encryp on Type: WEP, TKIP, AES

Wireless

access point

device

Connecting USB device

The USB jack supports USB ﬂ ash drive, TOSHIBA’s USB Wi-Fi and 4 ports USB HUB. A USB ﬂ ash drive provides an additional memory to software upgrade and enjoy BD-LiveTM bonus content. You can also enjoy playing back MP3/JPEG/MPEG4/ DivX

Connect the USB ﬂ ash drive or TOSHIBA’s USB Wi-Fi

Notes:

• To enjoy BD-Live™ bonus content, as your local

• For some Blu-ray

• TOSHIBA does not guarantee 100% compa bility with

• USB-HUB is used when using USB ﬂ ash drive and

adapter (Model name: WLM-12EB1)

ﬁ les stored in the USB ﬂ ash drive.

USB ﬂ ash drive

adapter to the USB jack on this product.

storage, use a 1 GB or larger USB ﬂ ash drive.

may need to plug in the USB ﬂ ash drive before loading the disc. Otherwise, the disc may not playback.

discs with BD-LiveTM feature, you

all USB ﬂ ash drives.

TOSHIBA’s USB Wi-Fi® adapter together.

Connecting Power

Connect the AC power cable to the wall socket.

• The product is ready to be set up for use.

Notes:

• Before connec ng the AC power cord, ensure you have completed all other connec ons.

• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the unit.

• The type plate is located on the back of the unit.

English

4 Preparation

Always follow the instructions in this chapter in

English

sequence.

Note:

- Use of controls or adjustments or performance of procedures other than herein may result in hazardous radia on exposure or other unsafe opera on.

Setting up the player

Find the correct viewing input

1. Press

2. Turn on the TV and switch to the correct video-in

to turn on this product.

input (refer to the TV user manual on how to select the correct input).

Prepare the remote control

1. Open the battery cover.

2. Insert two AAA batteries with correct polarity (+/-) as indicated.

3. Close the battery cover.

Notes:

- If you are not going to use the remote control for a

long  me, remove the ba eries.

- Do not use old and new or diﬀ erent types of ba eries

in combina on.

- Risk of explosion! Keep ba ery away from heat,

sunshine or ﬁ re. Never discard ba ery in ﬁ re.

• The maximum operable ranges from the unit are as follows.

- Line of sight: approx. 7 m

- Either side of the centre: approx. 5 m within 30°

- Above: approx. 5 m within 30°

- Below: approx. 5 m within 30°

Initial Setting

When you turn on this unit for the ﬁ rst time, or

restore all settings to factory defaults, the system will prompt you to perform Easy Setup.

1. Follow the on-screen instructions to customize the following settings to your preference:

OSD Language

Resolution Aspect ratio

2. After setting, press OK to conﬁ rm and exit.

Use the SETTING menu

1. Press SETTING to display the setup screen in stop mode or no disc playback.

Use the HOME menu

1. Press HOME to display the Home screen in stop mode or no disc playback.

5 m

7 m

5 m

5 Playback

Playback Functions

Basic Playback

1. Press

2. Turn on the TV, and then select the input setting

3. Press

4. Place a disc on the disc tray with the label facing

The disc loading time depends on the types of

5. After loading a disc, playback starts

6. If a Blu-ray disc or DVD menu displays, use

7. To eject the disc, press OPEN/CLOSE.

Pause playback

1. Press

2. Press to resume the playback.

Still Off

Press

Stop playback

1. Press Press to resume playback from the point

2. Press STOP twice to stop the playback Use / to select BD/DVD, and press OK to Not all Blu-rayTM discs support the resume

Fast Forward and Fast Reverse

1. Press

2. Press to fast reverse through the disc. The

The speed will increase through the following

3. Press to resume normal playback.

on the front panel or the remote control,

your Blu-ray Disc™ player will turn on. on the TV that matches the connection method

you used to connect your player.

OPEN/CLOSE to slide out the disc tray.

up, and then press OPEN/CLOSE to slide back and close the disc tray.

disc you are loading. automatically. cursor buttons to select PLAY. Then, press OK to

conﬁ rm.

to pause playback. The sound will be

muted.

to continue to playback at still off mode.

STOP once to go to resume mode, the

TV screen will show the resume logo. where playback is stopped. completely and the setup screen appears. begin playback from the beginning of the disc. feature.

to fast forward through the disc. The fast forward speed changes based on how many times you pressed the button.

fast reverse speed changes based on how many times you pressed the button.

sequence: 2X, 4X, 8X, 16X, 32X.

Instant Search and Instant Replay

1. During playback, press and hold you can search 30 seconds forward.

2. During playback, press and hold button, you can instant replay the content from 10 seconds before.

Previous and Next

1. During playback, press to the beginning of the current chapter or track or the previous chapter or track.

2. Press of button during playback will allow you to skip the playback to next chapter or track.

Slow Forward

1. Press STEP/SLOW during normal playback. The slow forward speed is 1/16 in default.

2. To change slow forward speed, press STEP/ SLOW repeatedly, and the slow forward speed will be changed in the following sequence: 1/16, 1/8, 1/4, 1/2, normal.

3. To exit slow forward mode and return to normal playback, press

Step Forward

Use this feature to help you to enjoy the video frame by frame.

1. Press

2. Press STEP/SLOW repeatedly to advance the

3. Press to resume normal playback.

during normal playback, then playback

will change to pause state. picture frame by frame.

button to skip back

button,

Advanced Playback

GOTO

During playback, press GOTO to edit Title, Chapter, and Time. Press / and OK on the remote control to select Title, Chapter, or Time. Then press the numeric buttons or / and then press OK. The playback will skip to the desired location. For Time Search, press / to select TT (Title) or CH (Chapter) time search.

TOP MENU

You may press this button at any time, and the Blu-

ray Disc

or DVD video disc playback will pop up

the disc menu.

POP UP/MENU

During Blu-ray DiscTM playback, press POP UP/ MENU to display the disc title, and the playback will not be stopped even the menu is on the screen.

English

RETURN

Press this button to return to the previous on-screen menu in Setting menu such as External Memory Information, Parental Control, etc.

English

During MP3/JPEG playback, press RETURN once, it will return back to Media Center page.

PROGRAM

During DVD/CD playback, you can press this button to edit the sequence of the playlist.

DIGEST

During playback of JPEG disc, press DIGEST to view a page of 12 thumbnail images.

- Use

/ / / to select an image.

Press OK to view the selected image in full-screen

and subsequent images will be displayed one after another automatically.

- Press / to view the previous or next thumbnail screen.

ZOOM

Press ZOOM repeatedly to Zoom in/out playback in the video. Zoom mode : Zoom 2x -> Zoom 3x -> Z oom 4x -> Zoom 1/2 -> Zoom 1/3 -> Zoom 1/4.

BOOKMARK

During playback, press the BOOKMARK button to add the bookmark; press and hold for a few seconds to display the list of bookmark which you added before on the screen, then you can press the OK button to select the bookmark or CLEAR button to delete the bookmark.

SUB

Press this button repeatedly and the screen will display “X/XX XXX” or “Off”. The “X” indicates the current number of this language; “XX” indicates the total number of language; “XXX” indicates the language. The number of available languages depends on the disc.

AUDIO

Press AUDIO button on the remote control to select the audio streams that set within the Blu-ray DVD disc. The screen will display: AUDIO: X / XX XXX XXXX “X” - The Current Audio Stream Number “XX” - The total number of Audio Stream “XXX” - Audio Language “XXXX” - Audio Technology

ANGLE

During playback, press this button to change the angle of the picture. The screen will display “Angle X/X.” The ﬁ rst “X” indicates the current number of angle, and the second “X” indicates total number of angle.

Not all Blu-ray The screen will take around 5 seconds to change.

PIP

Some Blu-ray™ discs have the PIP function enabling you to display the secondary video in the primary video. You can call up the secondary video by pressing the PIP button when the scene contains the secondary video. See the documentation that came with the disc for playback instructions.

1. Turn on secondary video by pressing the PIP button.

2. Press 2nd. AUDIO to turn on the audio for the secondary video (PIP).

In order to hear the secondary audio, the PIP

feature on the disc must be turned on.

3. Press PIP again to turn off the secondary video.

or DVD has the multi-angle feature.

Primary video

Secondary video with Secondary Audio

This function is not available when the primary video is played in Search, Slow-Motion, or Frameby-Frame or Fast Forward/ Reverse mode. To listen to the secondary audio, the digital audio output must be set to “Bitstream”, “Re-encode” or “PCM”. Otherwise, only the primary audio can be heard.

Notes:

- Not all the Blu-ray™ discs can support this func on.

- High Deﬁ ni on PIP (Secondary Video) is not supported.

REPEAT

Press REPEAT repeatedly to select different repeat modes. Blu-ray Disc DVD: Repeat Chapter, Title and All.

CD-DA/JPEG/MP3: Repeat Track and All.

A-B

To play certain section within the video or song, press A-B button to set the start point. Then, press A-B button again to set the end point and complete the setting. The selected section will be played repeatedly.

Press A-B button the third time to cancel this function. The end point cannot be set until 5 seconds of playback has elapsed from the start point. Not all Blu-ray feature.

: Repeat Chapter and Title.

discs support the repeat A-B

DISPLAY

Press this button and the screen will display some information about disc, such as: Title number, Chapter number, Track number, Elapsed Time, Audio, Angle, and Subtitle languages. Press this button again to turn off the information display.

OSC

Press OSC to open the On Screen Control menu during playback. In this menu, you can make some playback-related control. The on screen control contains following items: [Title]: The title in current playback/titles in total. Select your desired title to playback. [Chapter]: The chapter in current playback/ chapters in total. Select your desired chapter to playback. [Time]: View the elapsed/remaining playback time of title/chapter. Use playback time of title, the remaining playback time of title, the elapsed playback time of chapter, and the remaining playback time of chapter. [Mode]: Select playback mode among shufﬂ e, random, and normal. [Audio]: The Blu-ray Disc language. Use the disc and select your desired Audio type. [Angle]: The angle view of current playback/the angles in total. Use angle view. [Subtitle]: The Subtitle in current playback. Use

/ to view the subtitles available in the disc

and select your desired subtitle type or turn it off.

Note:

- In accordance with the diﬀ erent discs, there would be diﬀ erent sub tles. Such as Central Europe Cyrillic La n I Greek Turkish Hebrew

[Subtitle Style]: When you play the Blu-ray Disc or DVD disc and if it has external subtitle, you will see it in OSC menu. [Secondary Video]: To turn On/Off secondary video. [Secondary Audio]: To turn On/Off secondary audio. [Bitrate]: Use bitrate. [Still Off]: Close the Still feature. For some Blu-ray Disc™ or DVD discs, a certain video picture will be frozen as a still picture during the process of playback to let the user has a better view of certain picture. To continue pla yback, select Still Off. [Instant Search]: Instant search 30 seconds forward. [Instant Replay]: Replay the content from 10 seconds before.

/ to view: the elapsed

/ to view the audio available in

/DVD disc’s soundtrack

/ to select your desired

/ to select audio or video

Tips:

- The speciﬁ ed opera on for each item will vary with disc types. And some items are available only when the disc is supportable.

- The DivX® sub tle ﬁ lename(.sub) has to be saved under the same ﬁ lename as the movie(.avi) in the same folder (e.g. Folder A: abc.avi and abc.sub).

Playing MP3/JPEG/MPEG4/DivX® ﬁ les

ﬁ les.

ﬁ les that

You can play MP3/JPEG/MPEG4/DivX have been recorded on a disc or a USB ﬂ ash drive on the Blu-ray Disc™ player.

1. Load a disc or insert a USB ﬂ ash drive that contains MP3/JPEG/MPEG4/DivX

2. On the setup screen, press / to select Video, Music, or Photo, and then press OK.

The Media Center menu appears on the screen. e.g.

3. Press / to select Data Disc or USB1, and press OK.

4. Press / to select a ﬁ le (or folder) and press OK or to start playback.

It should match the selection on the setup

screen. (If you selected Video on the setup screen, you also should select Video here.)

Note:

- Not all media formats are supported.

Watermark

This product uses Cinavia technology to limit the use of unauthorized copies of some commerciallyproduced ﬁ lm and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback will be interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA.

English

6 Customizing

This section describes the various setting option of

English

this Blu-ray DiscTM player. If the setup option is greyed out, it means the

setting cannot be changed at the current state.

1. Press the SETTING button in stop mode to display the setup screen.

2. Press OK to enter the Setting menu.

3. Use

/ to select an option and press OK.

4. Press or the RETURN button to return to the previous menu.

Audio

1. In Setting menu, use / to select Audio and press OK.

2. Press / to select an option and press OK.

3. Use / to select the desired audio setting and press OK.

4. Press or the RETURN button to return to the previous menu.

[SPDIF]

When you connect an audio system to the COAXIAL DIGITAL output jack, the options are:

{Bitstream} - Selects Bitstream output if your receiver SPDIF (Coaxial) IN supports Dolby or DTS or PCM audio signal.

{PCM} - Selects PCM output if your receiver SPDIF (Coaxial) IN only supports PCM stereo audio signal.

{Re-encode} - Selects Re-encode output if your receiver SPDIF (Coaxial) IN supports Dolby or DTS and you want to hear both PIP audio and the movie audio on Blu-ray™ video.

{Off} - No audio will be output via COAXIAL DIGITAL output jack.

[HDMI]

When you connected a HDMI device to the HDMI OUT jack, the available options are:

{Bitstream} - Selects Bitstream output if your receiver HDMI IN supports Dolby or DTS or PCM audio signal.

{PCM} - Selects PCM output if your receiver HDMI IN only supports PCM audio signal.

{Re-encode} - Selects Re-encode if your receiver’s HDMI IN supports Dolby or DTS and you want to hear both PIP audio and movie audio on Blu-ray™ video.

{Off} - No audio will be output via HDMI OUT jack.

[Down_samp]

Select the digital audio signal sampling frequency. (Only Coaxial) {48k} - For discs recorded at sampling rate of 48 kHz. {96k} - For discs recorded at sampling rate of 96 kHz. {192k} - For discs recorded at sampling rate of 192 kHz.

[Dolby DRC]

Select the Dynamic Range Control mode which makes it available to listen to a movie at a low volume without losing sound clarity.

{Off} - Non-dynamic range compress. {On} - Dynamic range compress. {Auto} - Adjust the DRC according to input

audio. The setting of Auto is effective for Dolby TrueHD.

[Stereo Down Mix]

Select whether to downmix the multi-channel audio into fewer channels.

{Stereo} - Downmixes the multi-channel audio into two channel stereo. Choose when the Blu-ray Disc™ player is connected to equipment that does not support virtual surround function such as Dolby Pro Logic. {Surround Encoded(Lt/Rt)} - Downmixes the multichannel audio into surround compatible stereo. Choose when the Blu-ray Disc™ player is connected to equipment that supports virtual surround function such as Dolby Pro Logic.

System

1. In Setting menu, use / to select System and press OK.

2. Use / to select an option and press OK.

3. Press or the RETURN button to return to the previous menu.

[Screen Saver]

Turn On or Off the screen saver mode. It helps to protect the TV screen. {On} - Set the screen saver active after approximately 5 minutes without operation.

- The Blu-ray Disc mode if there is no operation after the screen saver is engaged for approximately 20 minutes.

{Off} - Turn off the screen saver mode.

- The Blu-ray Disc mode automatically.

player will switch to standby

player will not switch to standby

[Disc Auto Play]

Turn On or Off the disc automatic playback switching mode.

{On} - The disc playback automatically after loading.

{Off} - Turn off disc auto play mode.

[CEC]

This player supports REGZA-LINK which uses the HDMI CEC (Consumer Electronics Control) protocol. You can use one single remote control to control all REGZA-LINK-compliant devices that are connected through HDMI connectors. {On} - Turns on REGZA-LINK features.

- With CEC on, during TV standby with the Blu-ray

player on, pressing SETTING, PLAY/PAUSE

Disc will power on the TV . When you turn the TV of f , this unit will automatically turn off.

{Off} - Disables REGZA-LINK features. [Load Default]

Reset all settings of Blu-ray Disc default state.

- Follow the instruction on the TV screen to conﬁ rm the default setting operation.

[Deactivate Setting]

To apply the deactivation, unplug the player after operating deactivation.

[Upgrade]

This option allows to update your product software via a Disc, USB Storage or Network.

[External Memory]

External Memory would be used in BD-Live function. When you plug in the USB ﬂ ash drive which has at least 1GB free space to play BD-LiveTM function, the Blu-ray DiscTM system would make a directory named BUDA automatically. Media Information will display the Free size.

- Press OK to select “Fmt buda”, the data in the BUDA folder will be cleared.

[DivX(R) VOD DRM]

The DivX(R) VOD DRM means DivX(R) Video on Demand Digital Right Management.

player to initial

DivX

is the name of a revolutionary new

video codec which is based on the new MPEG-4 compression standard for video. You will be able to play DivX® movies using this player. You can only play DivX® videos that were rented or purchased with the DivX® registration code of this product. Select the DivX(R) VOD DRM option, you can ﬁ nd this product’s registration code. To learn more please visit http://www.divx.com/ vod.

Network

1. In Setting menu, use / to select Network and press OK.

2. Press / to select an option and press OK.

3. Press or the RETURN button to return to the previous menu.

[Internet Connection]

To enable/disable the Internet connection.

[Interface]

Choose the way to connect network via Ethernet or Wireless.

[Connection Test]

Selecting the Connection Test will cause the player to attempt to communicate with your home network, and if successful, with a known Internet address. If both attempts are successful, your network connection should be good. If the player can successfully connect to your home network, but not to the known Internet address, your Internet service may be “down”, or your security ﬁ rewall may be blocking access of the player to the Internet.

[IP Setting] {Auto} - Auto obtain network information. {Manual} - Manual setup network information.

[Wi-Fi Direct

It allows you to conﬁ gure a secured wireless network between the Blu-ray DiscTM player and a Wi-Fi DirectTM compatible device (e.g. smartphone) without using an access point (for BDX3400SE model only).

{Enable} - Turns on the Wi-Fi DirectTM features. {Disable} - Disables the Wi-Fi DirectTM features.

[Wi-Fi Direct

To scan and connect a Wi-Fi DirectTM compatible device, e.g. smartphone (for BDX3400SE model only).

[Information]

Display all Network Information.

]

Setting]

English

[BD-Live Connection] {Permitted} - During playback of BD-Live disc,

the disc may automatically download all information from appointed network.

English

{Partial Permitted} - During playback of BDLive™ disc, the disc may automatically download partial of the information from appointed network. {Prohibited} - Disable downloading information from network.

[Media Sever Search]

Media Sever Search function enables you to create an interoperability network with other devices for resource sharing based on a network. See Media Server Search on page18 for details.

Language

1. In Setting menu, use / to select Language and press OK.

2. Press / to select an option and press OK.

3. Use / to select the preferred language.

4. Press or the RETURN button to return to the previous menu.

[OSD]

Select the on-screen menu language.

[Menu]

Select the disc menu language.

[Audio]

Select the audio language of your preference.

[Subtitle]

Select your preferred subtitle language.

Security

1. In Setting menu, use / to select Security and press OK.

2. Press / to select an option and press OK.

3. Press or the RETURN button to return to the previous menu.

[Change Password]

Follow the instruction on the TV screen to change the password for locked discs and play restricted

discs/DVDs.

Blu-ray

1. Use NUMBER keys to enter four digit old password. The default password is “0000”.

2. Enter the new password.

3. Enter the new password again to conﬁ rm.

If you forget the password, you can erase your current password by entering the default password.

[Parental Control]

Restricts access to discs that are unsuitable for children. These discs must be recorded with rating.

1. Use NUMBER keys to enter the password.

2. Select a rating level, then press OK.

Items Description

1 [Kid safe] Safe for kids 2 [G] All children and general guidance 3 [PG] Parental guidance 4 [PG-13] Parental guidance for children

5 [PG-R] Parental guidance recommended 6 [R] Restricted viewing 7 [NC-17] No one 17 and under allowed 8 [Adult] Adult only

Notes:

- Rated discs above the level you set in [Parental Control] require a password to be entered.

- The ra ngs are country-depended. To allow all discs to play, select ‘Oﬀ ’.

under 13

Information

1. In Setting menu, use / to select

Information and press OK.

2. The current software version, MAC address and

Netﬂ ix ESN will be displayed.

3. Press or the RETURN button to return to the

previous menu.

Playback

1. In Setting menu, use

and press OK.

2. Press / to select an option and press OK.

3. Use / to select On/Off, and press OK to

conﬁ rm.

4. Press or the RETURN button to return to the

previous menu.

[Angle Mark]

Some Blu-rayTM discs/DVDs contain the scenes recorded with multiple angles, which allow you to enjoy the videos with your desired angles, therefore the angle mark is displayed only when the Blu-ray Disc™/DVD disc is supportable for multi-angle and Angle Mark is set to ON.

{On} - Display the angle mark. {Off} - Hide the angle mark.

/ to select Playback

+ 35 hidden pages