Toshiba 65HC85, 57HC85, 51HC85 User Manual

OWNER’S MANUAL

Projection Monitor

Introduction

Connecting

your Monitor

Using the

remote control

51HC85 57HC85

Setting up

Operating your

Owner's Record

The model number and serial number are on the back of your monitor. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this monitor.

Model:

Appendix

your Monitor

Monitor

65HC85

#01E_01_51HC85 05.4.28, 6:16 PM1

Black

(E) 51HC85, 57HC85, 65HC85

Serial No.:

Index

Dear Customer,

Thank you for purchasing this Toshiba monitor. This manual will help you use the many exciting features of your new monitor. Before operating the monitor, please read this

manual completely, and keep it nearby for future reference.

NOTE: THIS MONITOR DOES NOT CONTAIN A TUNER.

A set-top box (i.e., cable box or analog/digital receiver) is required to receive: (1) analog and/or digital broadcast signals from an antenna; and (2) analog and/or digital cable. For more information, refer to the applicable connection and setup instructions in this owner's manual.

Safety Precautions

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning symbol in the triangle tells you that the voltage inside this product may be strong enough to cause an electric shock. DO NOT TRY TO SERVICE THIS PRODUCT YOURSELF.

The exclamation mark in the triangle tells you that important operating and maintenance instructions follow this symbol.

NOTICE OF POSSIBLE ADVERSE EFFECTS ON

MONITOR PICTURE DISPLAY

If a fixed (non-moving) pattern or image remains on the monitor screen for extended periods of time, the image can become permanently ingrained in the cathode ray tube(s) of the monitor and cause subtle but permanent ghost images.

This type of damage is NOT COVERED BY YOUR WARRANTY. See item 33 on page 4 for details.

ENERGY STAR® qualified monitor. Products that earn the ENERGY STAR prevent green house gas emissions by meeting strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and the U.S. Department of Energy. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.

NOTE: NEVER CONNECT THIS MONITOR TO A PERSONAL COMPUTER (PC).

THIS MONITOR IS NOT INTENDED FOR USE WITH A PC.

Child Safety

It Makes A Difference Where Your TV/monitor Stands

Congratulations on your purchase! As you enjoy your new TV/monitor, keep these safety tips in mind:

The Issue

 If you are like most consumers, you have a TV/monitor in your

home. Many homes, in fact, have more than one TV/monitor.

 The home theater entertainment experience is a growing trend,

and larger TVs/monitors are popular purchases; however, they are not always supported on the proper TV/monitor stands.

 Sometimes TVs/monitors are improperly secured or

inappropriately situated on dressers, bookcases, shelves, desks,

audio speakers, chests, or carts. As a result, TVs/monitors

may fall over, causing unnecessary injury.

Toshiba Cares!

 The consumer electronics industry

is committed to making home

entertainment enjoyable and safe.

 The Consumer Electronics

Association formed the Home Entertainment Support Safety Committee, comprised of TV/monitor

and consumer electronics furniture

manufacturers, to advocate children’s

safety and educate consumers and their

families about TV/monitor safety.

Tune Into Safety

 One size does NOT fit all! Use appropriate

furniture large enough to support the weight of your TV/

monitor (and other electronic components).

 Use appropriate angle braces, straps, and anchors to secure

your furniture to the wall (but never screw anything directly into the TV/monitor).

 Carefully read and understand the other enclosed

instructions for proper use of this product.

 Do not allow children to climb on or play with furniture

and TVs/monitors.

 Avoid placing any item on top of your TV/monitor (such as a

VCR, remote control, or toy) that a curious child may reach for.

 Remember that children can become excited while watching

a program and can potentially push or pull a TV/monitor over.

 Share our safety message about this hidden hazard of

home with your family and friends. Thank you!

2500 Wilson Blvd. Arlington, VA 22201 U.S.A. Tel. 703-907-7600 Fax 703-907-7690 www.CE.org

CEA is the Sponsor, Producer and Manager of the International CES

the

#01E_02-05_51HC85 05.4.28, 6:16 PM2

Black

(E) 51HC85, 57HC85, 65HC85

Important Safety Instructions

QUALIFIED

SERVICE

TECHNICIAN

Installation, Care, and Service

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near

water.

6) Clean only with a dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Wide plug

Installation

Follow these recommendations and precautions and heed all warnings when installing your monitor:

16) Never modify this equipment. Changes or modifications may void: a) the warranty, and b) the user’s authority to operate this equipment under the rules of the Federal Communications Commission.

17) DANGER: RISK OF SERIOUS PERSONAL

INJURY, DEATH, OR EQUIPMENT DAMAGE! Never place the monitor

on an unstable cart, stand, or table. The monitor may fall, causing serious personal injury, death, or serious damage to the monitor.

18) Never place or store the monitor in direct sunlight; hot, humid areas; areas subject to excessive dust or vibration; or locations with temperatures at or below 41°F (5°C).

19) Always place the monitor on the floor or a sturdy, level, stable surface that can support the weight of the unit.

10) Protect the power cord from being

walked on or pinched, particularly at plugs, convenience receptacles, and the point where it exits the apparatus.

11) Only use attachments/accessories specified by the

manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during

lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15) CAUTION: To reduce the risk of electric shock, do not use the polarized plug with an extension cord, receptacle, or other outlet unless the blades can be inserted completely to prevent blade exposure.

20) Never place items such as vases, aquariums, or candles on top of the monitor.

21) Never block or cover the slots or openings in the monitor cabinet back, bottom, and sides. Never place the monitor:

• on a bed, sofa, rug, or similar

surface;

• too close to drapes, curtains,

or walls; or

• in a confined space such as a

bookcase, built-in cabinet, or any other place with poor ventilation.

The slots and openings are provided to protect the monitor from overheating and to help maintain reliable operation of the monitor.

22) Never allow anything to rest on or roll over the power cord, and never place the monitor where the power cord is subject to wear or abuse.

23) Never overload wall outlets and extension cords.

#01E_02-05_51HC85 05.4.28, 6:16 PM3

(E) 51HC85, 57HC85, 65HC85

Black

Ground clamp

Antenna discharge unit (NEC Section 810-20)

Grounding conductors (NEC Section 810-21)

Power service grounding electrode system (NEC Art 250 Part H)

Ground clamps

Antenna lead-in wire

Electric service equipment

QUALIFIED

SERVICE

TECHNICIAN

24) Always operate this equipment from a 120 VAC, 60 Hz power source only.

30) [This item applies to projection monitors only.] If the air temperature rises suddenly (for example, when the monitor is first delivered), condensation may form on the lenses. This can make the picture appear distorted or the color appear faded. If this happens, turn off the monitor for 6 to 7 hours to allow the condensation to evaporate.

25) Always make sure the antenna system is properly grounded to provide adequate protection against voltage surges and built-up static charges (see Section 810 of the National Electric Code).

26) DANGER: RISK OF SERIOUS PERSONAL

INJURY OR DEATH!

• Use extreme care to make sure you are never in

a position where your body (or any item you are in contact with, such as a ladder or screwdriver) can accidentally touch overhead power lines. Never locate the antenna near overhead power lines or other electrical circuits.

• Never attempt to install any of the following during lightning activity: a) an antenna system; or b) cables, wires, or any home theater component connected to an antenna or phone system.

31)For added protection of your monitor from lightning and power surges, always unplug the power cord if you leave the monitor unattended or unused for long periods of time.

32) During normal use, the monitor may make occasional snapping or popping sounds. This is normal, especially when the unit is being turned on or off. If these sounds become frequent or continuous, unplug the power cord and contact a Toshiba Authorized Service Center.

33)

Possible Adverse Effects on Monitor Picture Display: If a fixed (non-moving) pattern or image remains on the monitor screen for extended periods of time, the image can become permanently ingrained in the cathode ray tube(s) of the monitor and cause subtle but permanent ghost images. This type of

damage is NOT COVERED BY YOUR WARRANTY.

Never leave the monitor on for extended periods of time while it is displaying the following images or formats:

• Fixed Images, including but not limited to PIP/POP

windows, closed captions, video game patterns, TV station logos, stock tickers, and websites.

•

Special Formats that do not use the entire screen, including but not limited to widescreen or letterbox format media viewed on a 4:3 aspect ratio display (with gray or black bars at the top and bottom of the screen); or 4:3 aspect ratio format media viewed on a widescreen/16:9 aspect ratio display (with gray or black bars on the left and right sides of the screen).

Care

For better performance and safer operation of your TOSHIBA monitor, follow these recommendations and precautions:

27) Always sit approximately 10–25 feet away from the monitor and as directly in front of it as possible. The picture can appear dull if you sit too far to the left or right of the monitor, or if sunlight or room lights reflect on the screen. Turn the monitor off to check for reflections on the screen, and then remove the source of reflections while viewing the monitor.

28) Always unplug the monitor before cleaning. Never use liquid or aerosol cleaners.

29) WARNING: RISK OF ELECTRIC SHOCK!

Never spill liquids or push objects of any kind into the monitor cabinet slots.

Service

34) WARNING: RISK OF ELECTRIC SHOCK! Never attempt to service the

monitor yourself. Opening

and removing the covers may expose you to dangerous voltage or other hazards. Refer all servicing to a Toshiba Authorized Service Center.

35) If you have the monitor serviced:

• Ask the service technician to use only replacement parts

specified by the manufacturer.

• Upon completion of service, ask

the service technician to perform routine safety checks to determine that the monitor is in safe operating condition.

36)When the monitor reaches the end of its useful life, ask a

qualified service technician to properly dispose of the monitor. Improper disposal may result in a picture tube implosion and possible personal injury.

#01E_02-05_51HC85 05.4.28, 6:16 PM4

Black

(E) 51HC85, 57HC85, 65HC85

FCC compliance information

Federal Communications Commission (FCC)

This equipment complies with Part 15 of the FCC rules. NOTE: This equipment has been tested and found to

comply with the limits for a Class B device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by removing and applying power

Important Safety Precautions for Split Cabinet Feature

(Models 57HC85 and 65HC85 only)

Toshiba monitor models 57HC85 and 65HC85 have a split cabinet feature that allows disassembly of the cabinet into two sections during installation.

For details, please refer to the insert titled “Disassembly/ Reassembly Instructions for Split Cabinet Feature” included with this owner’s manual in the accessory pack. If you do not have the insert, you can download a copy of it from our Web site (www.toshiba.com/tacp in the U.S.A. or www.toshiba.ca in Canada). If you do not have access to the Internet, call 1-800-631-3811 in the U.S.A.

WARNING: If you split the cabinet for any purpose, NEVER energize the bottom section until it is completely and properly installed.

Energizing the disassembled bottom section and subjecting it to intentional misuse (for example, exposing it to a foreign object) creates the potential for an electrical shock hazard that could result in death or serious injury.

CAUTION: If you use the split cabinet feature, ALWAYS

handle and treat the top section of the monitor cabinet, which contains a glass mirror, with great care. If subjected to excessive mechanical abuse (for example, if bumped or dropped), the mirror may break, creating exposed glass fragments with sharp edges. Contact with these glass fragments may result in injury.

Installation, Care, and Service

CAUTION: The split cabinet feature allows disassembly of

the cabinet into two sections during installation. If you use the split cabinet feature, follow these precautions while the two sections of the monitor cabinet are disassembled:

to the equipment, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this equipment not expressly approved by Toshiba could void the user’s authority to operate this equipment.

1) Always handle and treat the top section of the monitor cabinet (with the viewing screen), which contains a glass mirror, with great care. If subjected to excessive mechanical abuse (for example, if bumped or dropped), the mirror may break, creating exposed glass fragments with sharp edges. Contact with these glass fragments may result in injury.

2) Never temporarily locate the disassembled bottom section in an area where it may be exposed to foreign objects or abuse (for example, areas where children may be playing, where items may fall on top of the unit, or where liquids may spill into the unit). Failure to follow this instruction may result in damage to the optic components of the monitor. SUCH DAMAGE IS NOT COVERED UNDER THE TOSHIBA LIMITED WARRANTY.

3) Always keep the top and bottom sections of the monitor cabinet in an upright position while disassembled. Failure to follow this instruction may result in damage to the monitor, including but not limited to the optic components, cabinet, bezel, and glass mirror. SUCH DAMAGE IS NOT COVERED UNDER THE TOSHIBA LIMITED WARRANTY.

4) Never energize the bottom section of the

monitor cabinet while disassembled. Failure to follow this instruction could result in death or serious injury.

5) Never place anything on top of the disassembled bottom section of the monitor cabinet. Failure to follow this instruction may result in damage to the optic components. SUCH DAMAGE IS NOT COVERED UNDER THE TOSHIBA LIMITED WARRANTY.

6) Never store or transport the unit while it is disassembled. Failure to follow this instruction may result in damage to the monitor, including but not limited to the optic components, cabinet, bezel, and glass mirror. SUCH DAMAGE IS NOT COVERED UNDER THE TOSHIBA LIMITED WARRANTY.

#01E_02-05_51HC85 05.4.28, 6:16 PM5

Black

(E) 51HC85, 57HC85, 65HC85

Important Safety Information............................. 2-5

Introduction................................................................ 7

Welcome to Toshiba ......................................................... 7

Exploring your new monitor ............................................ 7

Connecting your Monitor ........................................ 8

Connecting a VCR .......................................................... 9

Connecting a cable converter box and VCR................... 10

Connecting a DVD player or satellite receiver and

a VCR............................................................................ 11

Connecting a DVD player with ColorStream

(component video) and a VCR ...................................... 12

Connecting a DTV receiver/set-top box with ColorStream

(component video) and a VCR................ 13

Connecting two VCRs ................................................... 14

Connecting a camcorder ................................................ 14

Connecting an HDMI™ or a DVI device to

the HDMI input ........................................................... 15

Controlling infrared remote-controlled devices

through the monitor (IR pass-through).......................... 16

Connecting an audio system .......................................... 17

Using the remote control ...................................... 18

Preparing the remote control for use .............................. 18

Installing the remote control batteries ............................ 18

Remote control effective range .......................................18

Learning about the remote control ................................. 19

Using the remote control to operate your other devices.. 20

Remote control function key chart.......................... 21

Programming the remote control to operate your other

devices ........................................................................... 22

Remote control codes .................................................... 22

Setting up your Monitor ........................................ 24

Turning on the Monitor................................................. 24

Learning about the menu system ................................... 24

Changing the on-screen display language ....................... 25

Adjusting the color convergence..................................... 25

Operating your Monitor......................................... 27

Viewing the wide-screen picture formats

(480i, 480p, and 1080i signals only) ...........................27

Selecting the picture size ......................................... 27

Scrolling the TheaterWide

(TheaterWide 2 and 3 only) ................................... 29

Using the AUTO ASPECT feature ......................... 30

Using the POP double-window feature .......................... 31

Swapping the main and POP pictures ..................... 32

Switching the speaker sound

(main or POP program).......................................... 32

Double-Window aspect ratio .................................. 32

picture

Using the LOCKS menu ............................................... 33

Entering the PIN code ............................................ 33

If you cannot remember your PIN code .................. 33

Using the V-CHIP menu ............................................... 33

ENABLE BLOCKING .......................................... 34

TV RATING (Independent rating system for

broadcasters) ........................................................... 34

MPAA RATING (Independent rating system for

movies) ................................................................... 35

BLOCKING OPTION.......................................... 35

Changing the PIN code ................................................. 36

Adjusting the picture ..................................................... 36

Selecting the picture mode ......................................36

Adjusting the picture quality ................................... 37

Saving your new preferences ................................... 37

Selecting the color temperature ............................... 38

Using the CableClear

DNR feature ....................... 38

Resetting your picture setting adjustments .............. 39

Selecting the display format

(for 480p signals only) ............................................ 39

Selecting the cinema mode...................................... 39

Selecting the video input source .....................................40

Labeling the video input sources .................................... 40

Using the closed caption feature..................................... 41

Setting the sleep timer.................................................... 42

Setting the clock ............................................................ 42

Adjusting the sound ....................................................... 43

Muting the sound ................................................... 43

Using the WOW

surround sound feature .............. 43

Adjusting the sound quality .................................... 44

Resetting your audio adjustments ........................... 44

Using the StableSound

feature .............................. 45

Turning off the built-in speakers ............................. 45

Selecting the Audio OUT sound............................. 46

Selecting the background of the menu display ............... 46

Displaying monitor status information on-screen........... 47

Understanding the last mode memory feature ................ 47

Appendix................................................................... 48

Specifications ................................................................. 48

Tr oubleshooting .............................................................49

Limited United States Warranty ..................................... 50

Index .......................................................................... 51

#01E_06_51HC85 05.4.28, 6:16 PM6

Black

(E) 51HC85, 57HC85, 65HC85

Introduction

Welcome to Toshiba

Thank you for purchasing this Toshiba Monitor, one of the innovative projection monitors on the market. The goal of this manual is to guide you through setting up and operating your Toshiba monitor as quickly as possible.

This manual applies to models 51HC85, 57HC85, and 65HC85. Before you start reading, check the model and serial numbers on the back of your monitor. Write these numbers in the space provided on the front cover of this manual for your records.

Instructions in this manual are based on using the remote control. You also can use the controls on the monitor’s front panel if they have the same name as those on the remote control.

Please read all the safety and operating instructions carefully, and keep the manual for future reference.

Exploring your new monitor

You can operate your monitor using the buttons on the front panel or the remote control. The back panel and front panel (behind the door) provide all the terminal connections you will need to connect other equipment to your monitor. See “Connecting your Monitor” on page

8. Illustrations represent 57HC85.

NOTE: THIS MONITOR DOES NOT CONTAIN A TUNER.

A set-top box (i.e., cable box or analog/digital receiver) is required to receive: (1) analog and/or digital broadcast signals from an antenna; and (2) analog and/or digital cable.

For more information, refer to the applicable connection and setup instructions in this owner’s manual.

THIS MONITOR REQUIRES COLOR

CONVERGENCE ADJUSTMENT

AFTER SETTING UP.

Convergence may drift as a result of relocating or adjusting the position of the MONITOR. After setting up your MONITOR, it is recommended that you set the convergence. For instructions on adjusting the color convergence, see page 25.

Introduction

Connecting

your Monitor

Using the

remote control

Front

Back

Remote sensor

POWER

Power

indicator

OUT 1

OUT 2

(behind the screen)

Volume x •

VOLUME

EXIT

INPUT

EXITMENU

INPUT

VIDEO 3 IN

L/MONO

S-VIDEO

VIDEO

AUDIO

Video 3

Video/audio inputs

(behind the door)

Remote control

POWER

RECALL

INPUT

INFO

123

456

+10

100

DVDMENU

ENTER

TV CBL/SAT VCR DVD

TV/VCR PAUSE

REC

VOLCH

MUTE SLEEP

STOP

FREEZE SOURCE

FFREW

SKIP / SEARCH

SWAP

CT-90232

ENT

PIC S

EXIT

PLAY

SPLIT

LIGHT

Setting up

your Monitor

Monitor

Operating your

Appendix

#01E_07_51HC85 05.4.28, 6:16 PM7

Black

(E) 51HC85, 57HC85, 65HC85

IR OUT

VIDEO 1/2

ColorStream

HD1/HD2

HDMI IN

Var iable Audio OUT

Audio OUT

Index

Connecting your Monitor

Introduction

Connecting

your Monitor

Note: Cables except for Dual-wand IR blaster cable are not supplied with your

●

Using the

Remote Control

your TV

Setting up

Features

Using the TV’s

monitor.

Standard A/V (audio/video) cables usually come in sets of three, and are typically color-coded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio. On your monitors back panel, the standard A/V inputs are color-coded in the same manner as the cables.

S-video cable is for use with video equipment that has an S-video input. Component video cables come in sets of three, and are for use with

video equipment that has component video inputs. (ColorStream® is Toshiba’s brand of component video.)

HDMI cable is for use with video equipment that has an HDMI type A connector (see page 15).

Dual-wand IR blaster cable is for use with video devices with IR (infrared) remote control. This can be used with the monitor’s IR passthrough feature (see page 16).

Note: The IR blaster cable included with your monitor has specific characteristics that allows them to work properly with this monitor’s IR OUT ports. Never use other aftermarket IR blaster cable with this monitor. Other cables may not function properly and can cause damage.

THIS TYPE OF DAMAGE IS NOT COVERED BY YOUR TOSHIBA WARRANTY.

NOTE REGARDING PICTURE QUALITY

When connecting video equipment to your Toshiba monitor:

●

For GOOD picture quality: Use a standard yellow video cable.

●

For BETTER picture quality: input, use an S-video cable instead of a standard yellow video cable. (You still must connect the standard red and white audio cables for full system connection, but do not connect the standard yellow video cable at the same time, or the picture performance will be unacceptable.)

●

For BEST picture quality: If your equipment has component video (or HDMI) inputs, use either component video cables (or an HDMI cable) instead of a standard video or S-video cable. (A component video connection requires separate audio cables. An HDMI connection does not require separate audio cables.)

If your equipment has an S-video

Standard A/V cables (red/white/yellow)

S-video cable

Component video cables

HDMI cable

Dual-wand IR blaster cable

NOTICE: RISK OF EQUIPMENT DAMAGE!

Do not plug in any power cords

until you have finished connecting all equipment.

Appendix

Index

#01E_08-17_51HC85 05.4.28, 6:16 PM8

Black

(E) 51HC85, 57HC85, 65HC85

Connecting a VCR

This connection allows you to watch video tapes. You will need:

• one set of standard A/V cables

From Cable Box or Antenna

Stereo VCR

IN from ANT OUT to TV CH 3

CH 4

Monitor

OUT 1

OUT 2

VIDEO

OUT

AUDIO

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have a VCR with S-video, use an S-video cable (in the S-video terminals) instead of the standard video cable.

Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time, or the picture performance will be unacceptable.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under Copyright Law of the United States and other countries, and may subject you to civil and criminal liability.

Introduction

Connecting

your Monitor

Using the

remote control

Setting up

your Monitor

Monitor

Operating your

Appendix

#01E_08-17_51HC85 05.4.28, 6:16 PM9

Black

(E) 51HC85, 57HC85, 65HC85

Index

Connecting a cable converter box and VCR

This connection allows you to watch basic and premium cable channels and watch video tapes.

Introduction

Connecting

your Monitor

Using the

Remote Control

To watch basic and premium cable channels, put the monitor in VIDEO 1 mode and set the VCR to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels.

You will need:

• two coaxial cables

• one set of standard A/V cables

Monitor

OUT 1

OUT 2

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have a VCR with S-video, use an Svideo cable (in the S-video terminals) instead of a standard video cable. Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time, or the picture performance will be unacceptable.

your TV

Setting up

Features

Using the TV’s

Appendix

Stereo VCR

IN from ANT OUT to TV CH 3

CH 4

Cable converter box

INOUT

VIDEO

OUT

AUDIO

From cable

Index

#01E_08-17_51HC85 05.4.28, 6:16 PM10

Black

(E) 51HC85, 57HC85, 65HC85

Connecting a DVD player or satellite receiver and a VCR

This connection allows you to watch DVD/satellite and VCR. You will need:

• one (or two, if satellite receiver is used) coaxial cable

• one set of standard A/V cables (between the monitor and VCR)

• one S-video cable (between the monitor and DVD player/satellite receiver)

• one pair of standard audio cables (between the monitor and DVD player/satellite receiver)

Stereo VCR

OUT

AUDIO

From

Antenna

IN from ANT OUT to TV CH 3

CH 4

Monitor

OUT 1

OUT 2

VIDEO

Note:

For the highest possible picture quality from a DVD player or satellite receiver without component video or HDMI, use an S-video cable. (If your DVD player has component video, see page 12. If your DVD player or satellite receiver has HDMI or DVI, see page

15.) Do not connect both an S-video cable and a

standard video cable between the monitor and DVD player/satellite receiver at the same time or the picture performance will be unacceptable.

Do not connect the DVD player/satellite receiver and VCR to the same set of Video inputs on the monitor. (See the illustrations, which show the DVD player/satellite receiver connected to Video-1 on the monitor, and the VCR connected to Video-2 on the monitor.)

Introduction

Connecting

your Monitor

Using the

remote control

From

Satellite

Dish

IN from ANT

S-VIDEO

VIDEO

OUTOUT

VIDEO

OUTOUT

DVD player

AUDIO

OUT

Satellite receiver

AUDIO

OUT

Setting up

your Monitor

Monitor

Operating your

Appendix

#01E_08-17_51HC85 05.4.28, 6:16 PM11

Black

(E) 51HC85, 57HC85, 65HC85

Index

Connecting a DVD player with ColorStream (component video) and a VCR

This connection allows you to watch DVDs and video tapes.

Introduction

Connecting

your Monitor

Using the

Remote Control

your TV

Setting up

Your monitor has ColorStream (component video) inputs. Connecting your monitor to a DVD player with component video output (such as a Toshiba DVD player with ColorStream) can greatly enhance picture quality and realism.

You will need:

• one coaxial cable

• one set of standard A/V cables

• one pair of audio cables

• one set of component video cables (one S-video cable for a DVD player without component video inputs; see notes at right)

From Antenna

Stereo VCR

IN from ANT OUT to TV CH 3

CH 4

Monitor

OUT 1

OUT 2

VIDEO

OUT

AUDIO

Note:

For the highest possible picture quality, use component video cables (or an HDMI cable) between the monitor and DVD player.

You can connect component video cables to either set of ColorStream terminals on the monitor (HD1 or HD2).

For HDMI or DVI connection, see page 15. The ColorStream HD1/HD2 and HDMI

terminals can be used with Progressive (480p, 720p) and Interlaced (480i,1080i) scan systems; however, a 1080i signal will provide the best picture performance.

If your DVD player is not compatible with component video, HDMI, or DVI, use the S-video connections (plus the standard audio connections) instead (see page 11).

Features

Using the TV’s

Appendix

Index

RPB

VIDEO

OUT

S-VIDEO

COMPONENT VIDEO

DVD player with component video

AUDIO

OUT

#01E_08-17_51HC85 05.4.28, 6:16 PM12

Black

(E) 51HC85, 57HC85, 65HC85

Connecting a DTV receiver/set-top box with

ColorStream

This connection allows you to watch DTV (digital TV), VCR, and TV programs, and record DTV (composite video only) and TV programs.

Your monitor has ColorStream (component video) inputs. Connecting your monitor to a DTV receiver with component video inputs can greatly enhance picture quality and realism.

–To watch a DTV program, select ColorStream HD2 on the

monitor.

–To record and watch the same TV program, tune the VCR to the

channel to record, and select VIDEO 1 on the monitor.

–To record one program while watching another, tune the VCR to

the channel to record, tune the DTV receiver to the channel to watch, and select ColorStream HD2 on the monitor.

You will need:

• two coaxial cables

• two sets of standard A/V cables

• one pair of audio cables

• one set of component video cables (one S-video cable for a DTV receiver without component video; see notes at right)

From Antenna

Monitor

(component video) and a VCR

Stereo VCR

IN from ANT OUT to TV CH 3

CH 4

VIDEO

OUT

AUDIO

Note:

For the highest possible picture quality, use component video cables (or an HDMI cable) between the monitor and DTV receiver/settop box.

You can connect component video cables to either set of ColorStream terminals on the monitor (HD1 or HD2).

For HDMI or DVI connection, see page 15. The ColorStream HD1/HD2 and HDMI

terminals can be used with Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems; however, a 1080i signal will provide the best picture performance.

If your DTV receiver or set-top box is not compatible with component video, HDMI, or DVI, use the S-video connections (plus the standard audio connections) instead (see page 11).

Introduction

Connecting

your Monitor

Using the

remote control

Setting up

your Monitor

From DTV Antenna

DTV Receiver with component video

OUT 1

OUT 2

Satellite IN

S-VIDEO

COMPONENT VIDEO

RPB

VIDEO

OUT

AUDIO

OUT

Monitor

Operating your

Appendix

Index

#01E_08-17_51HC85 05.4.28, 6:16 PM13

Black

(E) 51HC85, 57HC85, 65HC85

Connecting two VCRs

This connection allows you to record (dub/edit) from one VCR to another VCR while watching a videotape.

Introduction

Connecting

your Monitor

–To record one program while watching another, tune VCR1 to the

You will need:

channel to record, tune VCR2 to the channel to watch, and select VIDEO 2 on the monitor.

• one signal splitter

• three coaxial cables

• three sets of standard A/V cables

From Antenna

Splitter

OUT OUT

VCR1

IN from ANT OUT to TV

CH 3 CH 4

VIDEO

OUT

AUDIO

Note:

If you have VCR (VCR1) with S-video, use S-video cables instead of standard video cables for better picture performance. Do not connect both a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time or the picture performance will be unacceptable.

Do not connect the same VCR to the output and input terminals is on the monitor at the same time. To dub or edit, VCR 2 must select Line IN, and the monitor must select VIDEO

1. *The Video OUT terminal does not output

the POP picture.

** The Audio OUT terminals can output the

sound of either the Main or POP picture (see “Selecting the Audio OUT sound” on page 46).

Using the

Remote Control

your TV

Setting up

Features

Using the TV’s

Appendix

Monitor

OUT 1

OUT 2

VCR2

IN from ANT OUT to TV

CH 3 CH 4

VIDEO AUDIO

OUT

Connecting a camcorder

This connection allows you to watch video materials recorded on a camcorder. You will need:

• one set of standard A/V cables

Camcorder

Note:

If you have a camcorder with S-video, use an S-video cable instead of a standard video cable for better picture performance. Do not connect both a standard video cable and an S-video cable at the same time or the picture performance will be unacceptable.

Index

#01E_08-17_51HC85 05.4.28, 6:16 PM14

Black

(E) 51HC85, 57HC85, 65HC85

VIDEO

AUDIO

OUT

VIDEO 3 IN

L/MONO R

S-VIDEO

VIDEO

AUDIO

Video-3 (front panel)

Connecting an HDMITM or a DVI device to the HDMI input

The HDMI audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI

[1]

input on your monitor receives digital

[2]

device.

[3]

This input is designed to accept HDCP

program material in digital form from EIA/CEA-861/861B– compliant

[4]

consumer electronic devices (such as a set-

top box or DVD player with HDMI or DVI output). The HDMI input is designed for best performance

with 1080i high-definition video signals, but will also accept and display 480i, 480p, and 720p signals.

NOTE: NEVER CONNECT THIS MONITOR TO A PERSONAL COMPUTER (PC).

THIS MONITOR IS NOT INTENDED FOR USE WITH A PC.

To connect an HDMI device, you will need:

• one HDMI cable (type A connector)

For proper operation, it is recommended that you use a short HDMI cable. You should not encounter difficulty if you use an HDMI cable shorter than

16.4 ft (5m). HDMI cable transfers both video and audio.

Separate analog audio cables are not required (see illustration below). Some CDVs (video CDs) may not output digital audio signals. In that case, you may hear sound by connecting analog audio cables. However, if you connect analog audio cables with this connection, the HDMI terminal on the monitor will not receive the HDMI digital audio signal and you will hear analog audio only.

HDMI device

VIDEO AUDIO

OUT

HDMI OUT

[1]

HDMI = High-Definition Multimedia Interface.

[2]

DVI = Digital Video Interface.

[3]

HDCP = High-bandwidth Digital Content Protection.

[4]

EIA/CEA-861/861B compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an

evolving technology, it is possible that some devices may not operate properly with the monitor.

To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:

•When turning on your electronic components, turn on the monitor first, and then the HDMI or DVI device.

•When turning off your electronic components, turn off the HDMI or DVI device first, and then the monitor.

To connect a DVI device, you will need:

• one HDMI-to-DVI adapter cable (HDMI type A connector)

For proper operation, the length of the HDMI-to-DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m).

• one pair of standard analog audio cables

An HDMI-to-DVI adapter cable transfers video only. Separate analog audio cables are required (see illustration below).

DVI device

Monitor

VIDEO AUDIO

OUT

DVI

OUT

Introduction

Connecting

your Monitor

Using the

remote control

Setting up

your Monitor

Monitor

Operating your

Monitor

OUT 1

OUT 2

HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.

#01E_08-17_51HC85 05.4.28, 6:16 PM15

Black

(E) 51HC85, 57HC85, 65HC85

OUT 1

OUT 2

Appendix

Index

Controlling infrared remote-controlled devices through the monitor (IR pass-through)

You can use the monitor’s IR OUT terminal (infrared pass-through) to remotely operate (through the monitor) many infrared remote-

Introduction

controlled devices (such as a Toshiba infrared remote-controlled VCR or DVD player) enclosed within an entertainment center or similar cabinet. Without the IR OUT connection, the device typically would need to be visible to operate it remotely.

You will need:

Connecting

your Monitor

To connect the IR blaster cable:

Using the

Remote Control

• one dual-wand IR blaster cable (included with your monitor)

• other audio/video cables as required to connect the device(s) to the monitor (see pages 8-15).

1. Locate the infrared sensor on the front of your device. This sensor is marked on some devices.*

2. Align one of the IR blaster cable’s wands about 1 inch away from the infrared sensor on the front of the device and attach it using the enclosed mounting tape. If you have a second device, attach the second wand in a similar manner (see illustration below).

Note: If you do not have a second device, coil the second wand with a rubber band and leave it behind the monitor.

3. Plug the IR blaster cable’s plug into the monitor’s IR OUT terminal.

Front of IR-controlled DVD player (for example)

To control the device(s): Point the monitor remote control

(programmed to operate the device; see pages 22–23) or the device’s remote control at the front of the monitor and press the button for the desired function. The signal passes from the remote control through the monitor to the device via the IR blaster cable.

R E

C A L

E R

I N

F O

+ 1

1 0

PIC SIZ

N U

DMENU

TER

EXIT

B L /

S A

H C R

M U T

S L E

P T V

/ V C

P A

U S

S T

O P

Y F R

E E

Z E

S O

U R

P L

I P / S

A R C

H S W

IG H

your TV

Setting up

Features

Using the TV’s

Appendix

Infrared sensor

Back of TV

OUT 1

OUT 2

Front of IR-controlled audio device (for example)

IR blaster cable wand (approx. 1 inch from device)

If you use the device’s remote control to operate the device, you also will need to use the monitor’s remote control to operate the monitor.

*If you cannot locate the device’s infrared

sensor:

1. Turn OFF the device.

2. Starting at the lower left corner of the device, place the end of the device’s remote control (with the infrared emitter) so it touches the front of the device and press POWER. (Do not use the monitor’s remote control for this step.)

3. If the device turns on, the place that the remote control touched the device is the location of the sensor.

4. If the device does not turn on, move the remote control slightly to the right and press POWER again.

5. Repeat step 4 until you locate the device’s infrared sensor.

Index

#01E_08-17_51HC85 05.4.28, 6:16 PM16

Black

(E) 51HC85, 57HC85, 65HC85

+ 36 hidden pages