SERVICE MODE ............................................................................................................................................................ 4
CHAPTER 2
SPECIFIC INFORMATIONS
SETTING & ADJUSTING DATA ...................................................................................................................................... 7
LAMP UNIT REPLACEMENT ......................................................................................................................................... 8
CHASSIS REPLACEMENT PARTS LIST ..................................................................................................................... 17
PC BOARDS TOP AND BOTTOM VIEW ..................................................................................................................... 26
WARNING: Service should not be attempted by anyone unfamiliar with the necessary precautions on this receiver. The following
are the necessary precautions to be observed before servicing this chassis.
1. An isolation transformer should be connected in the power line between the receiver and the AC line before any service is
performed on the receiver.
2. When the replacing a chassis in the cabinet, always be certain that all the prospective devices are put back in place, such
as; non-metallic control knobs,insulating covers, shields, isolation resistor-capacitor network etc.
PRODUCT SAFETY NOTICE
Many electrical and mechanical parts in this chassis have special safety-related characteristics. These characteristics are
often passed unnoticed by a visual inspection and the protection afforded by them cannot necessarily be obtained by using
replacement components rated for higher voltage, wattage, etc. Replacement parts which have these special safety characteristics are identified in this manual and its supplements; electrical components having such features are identified by the
international hazard symbols on the schematic diagram and the parts list.
Before replacing any of these components, read the parts list in this manual carefully. The use of substitute replacement
parts which do not have the same safety character istics as specified in the parts list may create shock, fire, or other hazards.
-
3
-
SERVICE MODE
1. ENTERING TO SERVICE MODE
1) Press MUTE button twice
on Remote Control.
MUTE
2) Press MUTE button
again to keep pressing.
2. DISPLAYING THE ADJUSTMENT MENU
1) Press MENU button on TV.
Service mode
S
Press
Press
Adjustment mode
3. SELECTING THE ADJUSTING ITEMS
1) Every pressing of CHANNEL button in the service mode changes the adjustment items in the order of table-2.
( button for reverse order)
Refer to table-1 for preset data of adjustment mode.
(See SETTING & ADJUSTING DATA on page 7)
3) While pressing the MUTE button,
press MENU button on TV set.
S
(Service mode display)
Item
Data
4. ADJUSTING THE DATA
1) Pressing of VOLUME or button will change the value of data in the range from 00H to FFH. The variable range
depends on the adjusting item.
5. EXIT FROM SERVICE MODE
1) Pressing POWER button to turn off the TV once.
-
4
-
6. SELF DIAGNOSTIC FUNCTION
1) Press “9” button on Remote Control during display of adjustment menu in the service mode.
The diagnosis will begin to check if interface among IC’s are executed properly.
2) During diagnosis, the following displays are shown.
SELF CHECK
NO. 23 * * * * * *
POWER : 000
BUS LINE : OK
BUS CONT : OK
BLOCK : MAIN SUB
SET ID : 80
E2P VER : 08
OPT1 : 00 OPT2 : A0
SW VER : DLE May 13 2004 17:**:**
HDMI
NO ********
ERR CDDE : 00
BEP
SW VER : 42
E2R VER : 02
Thermo1 : +51
Thermo2 : +50
TIME
TV: ******
LAMP :
****
Part number of microprocessor (IC609)
Operation number of protection circuit (The number of times of the power supply OFF by fan stop) . . . . “000” is normal.
BUS line check“OK” ................... Normal
“SCL-GND” or “NG” ........... SCL-GND short circuit
“SDA-GND” or “NG” ........... SDA-GND short circuit
“SCL-SDA” or “NG” ............ SCL-SDA short circuit
BUS line ACK (acknowledge) check
“OK” ................... Normal
Sync. signal checkGreen display ..... Normal
Red display ........ NG
MAIN ........ Main sync
SUB .......... Sub sync (when turn on the PIP)
ID code for TV Set
Version of "EEP"
Data for "OPT"
Temperature of DMD
Temperature of the color wheel neighborhood
Software version history
HDMI Software
NO *****.....Serial No.
ERR CODE .....Error Code
BEP Software Version
SW VER : **.....Version
E2P VER : ** EEP ROM Version
Use time
TV.....TV set on time (hour)
LAMP.....LAMP set on time (hour)
(It may shift from TV set on time.)
-
5
-
7. LED indicationsn
The green and red LED lights on the TV control touchpad
(on the lower right corner of the TV screen)
indicate the TV's current status, as follows:
.
Green ON = Control touchpad being pressed.
.
Red ON = Power ON.
.
Green and/or Red blinking
(see table below for condition and solution).
Control touchpad on TV front
MENUVOLUMECHANNELEXITTV/VIDEOPOWER
Red indicator
Green indicator
LED Indication
Red LEDGreen LED
1
OFFOFF
2
OFFOFF
3
ON (Solid)OFF
4
ON (Solid)ON (Solid)
5
OFFBlinks
(1sec. intervals)
6
ONBlinks
(Solid)(0.3sec. intervals)
7
BlinksON
(0.5sec. intervals)(Solid)
8
BlinksBlinks
(1sec. intervals)(1sec. intervals)
9
BlinksOFF
(0.5sec. intervals)
10
BlinksOFF
(1sec. intervals)
11
BlinksOFF
(3times)
12
BlinksBlinks
(3times)(3times)
Condition
Power supply OFF. (AC)
Power supply OFF. (Standby)
(North America)
Power supply ON.
Touched the touchpad
Lamp LPS mode
The lamp is not working properly.
The lamp unit door is not seated
properly. (U)
The lamp is not working properly
after the third automatic reset (see
item #7). (U)
FAN (Light engine unit) has
stopped.
BUS line is damaged
The collar wheel has stopped.
Temperature rises abnormally.
(U) is restoration by the user.
Solution
The TV automatically will try to reset itself
three times.
Turn the POWER OFF and unplug the power
cord. Review “How to replace the lamp unit”
on pages 13-15 to ensure that the lamp unit
door is installed securely.
Turn the POWER OFF and then ON again. If
the problem persists, replace“the lamp unit
(see pages 13-15).
• Is the output voltage of the supply voltage
regulator for the FAN in the power circuit
normal?
• Has dust accumulated in the FAN?
If the output voltage is not abnormal,
replace the faulty FAN with a new one.
• Check the faulty device through the self
diagnostics function under SERVICE mode.
• Does BUS line (SOL, SDA) work normally?
If the BUS line is under abnormal
conditions, replace the faulty device with
a new one.
• Is the output voltage of the power supply
circuit normal?
If the output voltage is normal, replace the
engine with a new one.
• Is the ventilating hole in the set (exhaust
slot on the rear) blocked or covered?
• Is FAN rotating normally?
• Has dust accumulated in the ventilating
hole?
If no abnormally conditions are found,
replace the engine with a new one.
-
6
-
CHAPTER 2 SPECIFIC INFORMATIONS
SETTING & ADJUSTING DATA
SERVICE MODE
ADJUSTING ITEMS AND DATA IN THE SERVICE MODE:
ItemName of adjustment
RCUTR CUT OFF
GCUTG CUTOFF
BCUTB CUT OFF
GDRVG DRIVE
BDRVB DRIVE
BRTCBRIGHT CENTER
SCNTSUB CONTRAST FOR TV
COLCCOLOR CENTER
UVTTBASE BAND TINT
CNTXSUB CONTRAST MAX
HPOSH-POSITION (PAL/DFS)
HPOS(PJ ONLY) 56P CONVERGENCE OSD PATTERN HPOS
VPOS(PJ ONLY) 56P CONVERGENCE OSD PATTERN VPOS
CWDHCOLOR WHEEL DELAY (HIGH)
CWDLCOLOR WHEEL DELAY (LOW)
DMDBDMD BIAS
OPT1TV SET OPTION
OPT2TV SET OPTION
TVOPTV OPTION
PLLW0PLL WAIT TIME
PLLW1PLL WAIT TIME
PLLW2PLL WAIT TIME
PLLW3PLL WAIT TIME
PLLW4PLL WAIT TIME
PLLW5PLL WAIT TIME
V01VOLUME (DATA)
V25VOLUME (DATA)
V50VOLUME (DATA)
V75VOLUME (DATA)
V100VOLUME (DATA)
MODHMODUS DATA HIGH
MODLMODUS DATA LOW
PRESFMAM PRESCALE
SCTHVOLUME SCART OPTION HIGH
SCTLVOLUME SCART OPTION LOW
The image system data of RCUT-CNTX is different by each image format.
The NTSC value is indicated in the table.
-
7
-
LAMP UNIT REPLACEMENT
Cautions when replacing LAMP UNIT
The light source for this TV is a mercury lamp with internal atmospheric
pressure that increases during use. The lamp has a limited service life
that varies depending on user settings. If you use the lamp beyond its
service life:
.
you may notice a reduction in the colors and/or brightness of the picture; and
.
the strength of the quartz glass in the lamp will be reduced and the
lamp may rupture (often making a loud noise when this happens). If
the lamp reputres, the TV will operate until the lamp unit is replaced.
Note: The lamp unit is designed so broken lamp glass remains se-
curely inside the lamp unit.
CAUTION: Always handle the lamp unit with care.
The lamp unit in this TV was designed for safe replacement by consumers; however, if the lamp unit is subjected to intentional abuse (such as excessive mechanical abuse or handling by
children or pets), the unit may break, exposing edges or pinch points.
When to replace the lamp unit
You should replace the lamp unit:
.
if the picture darkens and/or colors fade;
.
if the lamp does not light; or
.
If you hear a loud noise and the picture goes black, which may indicate a lamp rupture.
-
8
-
1.Turn off the TV and unplug the power cord.
2.STOP! Allow the lamp to cool for at least one (1) hour
before replacing it.
3.On the back of the TV, loosen the thumb screw (by hand)
on the lamp unit door, and then remove the lamp unit
door.
5.Grasp the lamp unit handle and gently pull the lamp unit
straight out of the TV. Set the old lamp unit aside.
6.Carefully insert the new lamp unit straight into the TV
until it is fully seated.
Note :
Never subject the lamp unit to excessive shock.
Never touch the lamp unit glass or otherwise get it
dirty.
Doing so may affect the image quality and reduce
the service life of the lamp. See “Cleaning the lamp
unit glass” below.
4.Using a manual screwdriver, loosen two screws on the
lamp unit.
7.Using a manual screwdriver, tighten two lamp unit
screws.
Note:Hand-tighten only. Do not use an electric screwdriver.
-
9
-
8.Reattach the lamp unit door, making sure to insert the
hook on the left side of the lamp unit door inside the
opening in the TV cabinet.
9.Replace the thumb screw and hand-tighten.
10. Plug in the power cord and turn on the TV. After the
initial warmup period (which may take up to 45 seconds
for full picture brightness), the TV should operate normally. If any of the following conditions exist, turn off the
TV, unplug the power cord, and repeat steps 1-9 to ensure that the lamp unit and lamp unit door are installed
correctly:
No picture
Dark picture
TV will not turn on
-
10
-
LIGHT ENGINE REPLACEMENT
Cautions when replacing LIGHT ENGINE
LIGHT ENGINE is a heart of TV which emits high heat.
Make sure to replace it after turning off the TV and wait
for sufficient cool down. (More than one hour is recommended.)
Do not add any impact during replacement; otherwise,
some parts may be damaged.
Do not touch any optical lens. Adhesion of dirt may
deteriorate its performance.
Do not loosen any screw other than those to be removed
for adjustment or replacement.
LIGHT ENGINE emits ultraviolet rays when the TV is
ON. Make sure to be careful.
1.Replacement of Light Engine Unit
1-1. When Light Engine Unit is replaced with a new one, the
adjustment is required. Adjusted values are described
in bar code, and the values of bar code must be converted to the adjusted values for the setup.
There are 2 types of bar code.
1-2. Adjustment is made by service mode. The adjusting
items consist of CWDL, CWDH and DMDB.
CWDL CWDH
When CW delay number of the data bar code is 0450:
0450 indicates 450 45.0
Double 45.0 to form hexadecimal number (HEX).
45.0 x 2=90 5A (hexadecimal)
The adjusted value becomes “5A” for CWDL and “00”
for CWDH.
If hexadecimal number forms 3 or 4 digits, the latter 2
digits indicate CWDL while the first 2 digits indicate
CWDH.
(For 3 digits, CWDH=0*)
Note:
For converting decimal number to hexadecimal number, see the conversion table on the next page.
Serial bar code
Data bar code
Serial bar code
Ex.52A000A111111
Inch size
Data bar code (CW: color wheel)
Ex.A111111B1111
Serial numbers
CWdelay number: 4digits
DMD bias value
Substrate serial numbers
DMDB
Read DMD bias value described in alphabet from the
data bar code. In service mode, DMDB value is converted and fixed by the following table.
DMD value in bar
code
B00
C01
D02
E03
F04
Refer to Service Mode for adjusting the service mode.
Adjusted value
(Hex)
-
11
-
Conversion Table for Decimal and Hexadecimal Numbers
1-1. For replacing FAN for cooling heatsink, remove 2
screws.
For replacing FAN for cooling lamp, detach FAN hood
located on LIGHT ENGINE by removing 2 screws and
then remove 4 screws.
FAN for cooling lamp
FAN for cooling heatsink
2.Replacement of Ballast Power Unit
2-1. Remove lamp unit by loosening 2 screws.
(Refer to pages 13 to 15)
2-2. Remove 2 screws holding chassis of ballast power unit
to detach the chassis.
Note:
Treat with enough care so as not to damage the
cable for lamp power.
2-3. Detach the ballast power unit by removing 4 substrate
stoppers that hold the ballast power unit.
CAUTION
Precautions When Exchanging Ballast Power Units
When you install a new ballast power unit, install it
while pushing the four corners of the board directly.
Installation while pressing the heatsink may cause
the pattern crack.
3.Replacement of Temperature Breaker
3-1. Remove 2 screws for replacing the temperature breaker
for lamp.
Ballast power unit
4Replacement of Sensor Unit (Photo Detector
Substrate) & Motor Unit (Motor Substrate)
4-1. Remove 2 screws fixing a color wheel cover and UV
When removing screws, do not damage the
color wheel with drivers, etc. Even a small impact may damage the color wheel.
Make sure not to touch the color wheel.
Don’t remove other screws by any means.
-
14
-
EXPLODED VIEW
4 screws
K601
12 screws
W661
12 screws
12 screws
A101
W662
4 screws
4 screws
A201
A215
2 screws
A101
3 screws
A278
A271
2 screws
A222
A204
A227
2 screws
UV03
1 screw
A333
-
15
13 screws
-
MECHANICAL DISASSEMBLY
1 Bezel Ass'y Removal2 Mirror Removal
12 screws
K601 (MIRROR)
4 screws
A201
A101
12 screws
3 Back Cover Removal4 Speaker & Touchpad Removal
A101
4 screws
A204
4 screws
A227
13 screws
A222
5 Bracket Removal6 Optical Engine Removal
A278
2 screws
1 screw
A333
A271
2 screws
A215
3 screws
-
16
A333
2 screws
-
CHASSIS AND CABINET REPLACEMENT PARTS LIST
WARNING: BEFORE SERVICING THIS CHASSIS, READ THE “X-RAY RADIATION PRECAUTION”, “SAFETY PRECAUTION”
AND “PRODUCT SAFETY NOTICE” ON PAGE 3 OF THIS MANUAL.
CAUTION: The international hazard symbols "" in the schematic diagram and the parts list designate com-ponents which
have special characteristics important for safety and should be replaced only with types identical to those in the original
circuit or specified in the parts list. The mounting position of replacements is to be identical with originals. Before replacing
any of these components, read carefully the PRODUCT SAFETY NOTICE. Do not degrade the safety of the receiver through
improper servicing.
NOTICE:
•
The part number must be used when ordering parts, in order to assist in processing, be sure to include the Model
number and Description.
•
The PC board assembly with ∗ mark is no longer available after the end of the production.
Resistors ............... CF: Carbon FilmCC : Carbon CompositionMF : Metal Film
OMF : Oxide Metal FilmVR : Variable ResistorFR: Fusible Resistor
(All CD and PF capacitors are ±5%, 50V and all resistors, ±5%, 1/6W unless otherwise noted.)
Location
No.
Parts No. Description
[#1:52HMX94]
[#2:62HMX94]
CAPACITORS
C10124797339 ELECTROLYTIO CE04G, 50V 3.3UF M
C10224665221 ELECTROLYTIC, 10V 220UF M 3A
C10524100102 CERAMIC CHIP, 50V F 1000PF Z
C10624669479 ELECTROLYTIC, 50V 4.7UF M 3A
C10724666221 ELECTROLYTIC 04Q, 16V 220UF M 3A
C10824665221 ELECTROLYTIC, 10V 220UF M 3A
C10924100104 CERAMIC CHIP, 25V F 0.1UF Z
C11024794101 ELECTROLYTIC, 16V 100UF M
C50224092730 CERAMIC CHIP, 16V B 0.1UF K
C50824092730 CERAMIC CHIP, 16V B 0.1UF K
C51524092730 CERAMIC CHIP, 16V B 0.1UF K
C51624109103 CERAMIC CHIP, 50V B 0.01UF K
C51724092731 CERAMIC CHIP, 16V B 1UF K
C52424092730 CERAMIC CHIP, 16V B 0.1UF K
C53824630727 ELECTROLYTIC, 6.3V 330UF M 7L 3A
C58224105101 CERAMIC CHIP, 50V CH 100PF J
C60124109122 CERAMIC CHIP, 50V B 1200PF K
C60224109122 CERAMIC CHIP, 50V B 1200PF K
C60324073084 ELECTROLYTIC, 50V 4.7UF M 3A
C60424073084 ELECTROLYTIC, 50V 4.7UF M 3A
C60524073086 ELECTROLYTIC, 50V 10UF M 3A
C60624073086 ELECTROLYTIC, 50V 10UF M 3A
C60724073053 ELECTROLYTIC, 25V 100UF M 3A
C60824073086 ELECTROLYTIC, 50V 10UF M 3A
C61224073054 ELECTROLYTIC CE04P 25V 220UF M 3A
C62124109822 CERAMIC CHIP, 50V B 8200PF K
C62224109822 CERAMIC CHIP, 50V B 8200PF K
C66124073084 ELECTROLYTIC, 50V 4.7UF M 3A
C66224073086 ELECTROLYTIC, 50V 10UF M 3A
C66324073086 ELECTROLYTIC, 50V 10UF M 3A
C66524109103 CERAMIC CHIP, 50V B 0.01UF K
C66624073084 ELECTROLYTIC, 50V 4.7UF M 3A
C66724794100 ELECTROLYTIC, 16V 10UF M
C66824105560 CERAMIC CHIP, 50V CH 56PF J
C66924105560 CERAMIC CHIP, 50V CH 56PF J
C68024073073 ELECTROLYTIC, 35V 2200UF M 3A
C68124109103 CERAMIC CHIP, 50V B 0.01UF K
Location
No.
C68224073082 ELECTROLYTIC, 50V 2.2UF M 3A
C68324073053 ELECTROLYTIC, 25V 100UF M 3A
C68424795470 ELECTROLYTIC, 25V 47UF M
C80124503004 PLASTIC FILM, AC275V 0.47UF M
C80224503002 PLASTIC FILM, AC275V 0.22UF M
C80324503002 PLASTIC FILM, AC275V 0.22UF M
C80524092281 CERAMIC DISC, AC250V E 4700PF
C80924073103 200V 680UF RUBIKON CE692Q2D681M
C81024073103 200V 680UF RUBIKON CE692Q2D681M
C81124092557 CERAMIC DISC, AC250V E 2200PF M
C81224092557 CERAMIC DISC, AC250V E 2200PF M
C81624092555 CERAMIC DISC, AC250V E 1000PF M
C86124092342 CERAMIC DISC, 2KV R 560PF K
C86224503045 PLASTIC FILM, 63V 0.22UF J
C86324212221 CERAMIC DISC, 50V B 220PF K
C86424590681 PLASTIC FILM CQ922M 50V 680PF J
C86524073063 ELECTROLYTIC CE04P 35V 4.7UF M 3A
C86624820223 PLASTIC FILM, 630V 0.022UF J
C86824073068 ELECTROLYTIC, 35V 100UF M 3A
C88324567104 PLASTIC FILM, 50V 0.1UF J
C88424214331 CERAMIC DISC, 500V B 330PF K
C88524073191 ELECTROLYTIC CE04P 35V 1500UF M 3A
C89024214331 CERAMIC DISC, 500V B 330PF K
C89124073161 ELECTROLYTIC CE04P 16V 3900UF M 3A
C89224214331 CERAMIC DISC, 500V B 330PF K
C89324073173 ELECTROLYTIC CE04P 10V 3900UF M 3A
C89424214331 CERAMIC DISC, 500V B 330PF K
C89524073095 ELECTROLYTIC, 50V 2200UF M 3A
C89824503041 PLASTIC FILM , 63V 0.1UF J
C820024073067 ELECTROLYTIC, 35V 47UF M 3A
C820124503047 PLASTIC FILM, 63V 0.33UF J
C820224073169 ELECTROLYTIC CE04P 25V 470UF M 3A
C821024073037 ELECTROLYTIC, 16V 47UF M 3A
C821124503047 PLASTIC FILM, 63V 0.33UF J
C821224503047 PLASTIC FILM, 63V 0.33UF J
C821424073169 ELECTROLYTIC CE04P 25V 470UF M 3A
C822024073068 ELECTROLYTIC, 35V 100UF M 3A
C822124073169 ELECTROLYTIC CE04P 25V 470UF M 3A
C822324073086 ELECTROLYTIC, 50V 10UF M 3A
C822424073087 ELECTROLYTIC, 50V 22UF M 3A
C822524073141 ELECTROLYTIC CE04P 10V 1000UF M 3A
Parts No. Description
-
17
-
Location
No.
C824024073038 ELECTROLYTIC, 16V 100UF M 3A
C824124503047 PLASTIC FILM, 63V 0.33UF J
C824224073141 ELECTROLYTIC CE04P 10V 1000UF M 3A
C825024073141 ELECTROLYTIC CE04P 10V 1000UF M 3A
C825124567334 PLASTIC FILM, 50V 0.33UF J
C825224073141 ELECTROLYTIC CE04P 10V 1000UF M 3A
C825324669339 ELECTROLYTIC, 50V 3.3UF M
C890524073002 ELECTROLYTIC CE04P 6.3V 220UF M 3A
C891124503047 PLASTIC FILM, 63V 0.33UF J
C891224503047 PLASTIC FILM, 63V 0.33UF J
C893024073067 ELECTROLYTIC, 35V 47UF M 3A
C893124503047 PLASTIC FILM, 63V 0.33UF J
C893224073152 ELECTROLYTIC CE04P 16V 330UF M 3A
C893324073069 ELECTROLYTIC, 35V 220UF M 3A
C894024073067 ELECTROLYTIC, 35V 47UF M 3A
C894124503047 PLASTIC FILM, 63V 0.33UF J
C894224073152 ELECTROLYTIC CE04P 16V 330UF M 3A
C894324073069 ELECTROLYTIC, 35V 220UF M 3A
CA8124109183 CERAMIC CHIP, 50V B 18000PF K
CA8224109183 CERAMIC CHIP, 50V B 18000PF K
CA8324109102 CERAMIC CHIP, 50V B 1000PF K
CA8424109183 CERAMIC CHIP, 50V B 18000PF K
CA8524109183 CERAMIC CHIP, 50V B 18000PF K
CA8624109183 CERAMIC CHIP, 50V B 18000PF K
CA8724109183 CERAMIC CHIP, 50V B 18000PF K
CA8824109102 CERAMIC CHIP, 50V B 1000PF K
CA8924109183 CERAMIC CHIP, 50V B 18000PF K
CA9024109183 CERAMIC CHIP, 50V B 18000PF K
CA9124092730 CERAMIC CHIP, 16V B 0.1UF K
CA9224092730 CERAMIC CHIP, 16V B 0.1UF K
CA9324619040 ELEC. CHIP, 16V 10UF M 3A
CA9424619040 ELEC. CHIP, 16V 10UF M 3A
CA9524092730 CERAMIC CHIP, 16V B 0.1UF K
CA9624092730 CERAMIC CHIP, 16V B 0.1UF K
CA9724105330 CERAMIC CHIP, 50V CH 33PF J
CA9824105330 CERAMIC CHIP, 50V CH 33PF J
CB0124794470 ELECTROLYTIC, 16V 47UF M
CB5124590103 PLASTIC FILM, 50V 0.01UF J
CB5224794470 ELECTROLYTIC, 16V 47UF M
CB5324503041 PLASTIC FILM , 63V 0.1UF J
CB5424436221 CERAMIC DISC, 50V SL 220PF J
CB5524797010 ELECTROLYTIC, 50V 1UF M
CB5624794470 ELECTROLYTIC, 16V 47UF M
CB5824794470 ELECTROLYTIC, 16V 47UF M
CB5924590103 PLASTIC FILM, 50V 0.01UF J
CB6024794100 ELECTROLYTIC, 16V 10UF M
CB6124503041 PLASTIC FILM , 63V 0.1UF J
CB8124092730 CERAMIC CHIP, 16V B 0.1UF K
CB50424794100 ELECTROLYTIC, 16V 10UF M
CB50524092398 CERAMIC DISC, 25V 0.1UF Z
CC0124092730 CERAMIC CHIP, 16V B 0.1UF K
CC0224092730 CERAMIC CHIP, 16V B 0.1UF K
CC0324092730 CERAMIC CHIP, 16V B 0.1UF K
CC0424619100 ELECTROLYTIC, 16V 10UF M
CC0524092730 CERAMIC CHIP, 16V B 0.1UF K
CC0624092730 CERAMIC CHIP, 16V B 0.1UF K
CC0724619100 ELECTROLYTIC, 16V 10UF M
CC0824092730 CERAMIC CHIP, 16V B 0.1UF K
CC0924092730 CERAMIC CHIP, 16V B 0.1UF K
CC1024092730 CERAMIC CHIP, 16V B 0.1UF K
CC1124619100 ELECTROLYTIC, 16V 10UF M
CC1224092538 CERAMIC CHIP, 10V F 1UF Z
CC1324092730 CERAMIC CHIP, 16V B 0.1UF K
CC1424092730 CERAMIC CHIP, 16V B 0.1UF K
CC1524619100 ELECTROLYTIC, 16V 10UF M
CC1624092730 CERAMIC CHIP, 16V B 0.1UF K
Parts No. Description
Location
No.
CC1724619100 ELECTROLYTIC, 16V 10UF M
CC1824092730 CERAMIC CHIP, 16V B 0.1UF K
CC1924092730 CERAMIC CHIP, 16V B 0.1UF K
CC2024619100 ELECTROLYTIC, 16V 10UF M
CC2224092538 CERAMIC CHIP, 10V F 1UF Z
CC2424092538 CERAMIC CHIP, 10V F 1UF Z
CC2524092538 CERAMIC CHIP, 10V F 1UF Z
CC2624092730 CERAMIC CHIP, 16V B 0.1UF K
CC2724092730 CERAMIC CHIP, 16V B 0.1UF K
CC2824619102 ELECTROLYTIC, 16V 47UF M
CC3024619100 ELECTROLYTIC, 16V 10UF M
CC3124092730 CERAMIC CHIP, 16V B 0.1UF K
CC3224619100 ELECTROLYTIC, 16V 10UF M
CC3324092730 CERAMIC CHIP, 16V B 0.1UF K
CC3424092730 CERAMIC CHIP, 16V B 0.1UF K
CC3524092730 CERAMIC CHIP, 16V B 0.1UF K
CC3624619100 ELECTROLYTIC, 16V 10UF M
CC4024092538 CERAMIC CHIP, 10V F 1UF Z
CC4124092730 CERAMIC CHIP, 16V B 0.1UF K
CC4224109103 CERAMIC CHIP, 50V B 0.01UF K
CE0124503002 PLASTIC FILM, AC275V 0.22UF M
CE0424092281 CERAMIC DISC, AC250V E 4700PF
CE0524092281 CERAMIC DISC, AC250V E 4700PF
CE0724092565 CERAMIC DISC, AC250V B 470PF K
CE0824092565 CERAMIC DISC, AC250V B 470PF K
CE0924092565 CERAMIC DISC, AC250V B 470PF K
CE1024073217 ELECTROLYTIC 692Q 200V 560UF M
CE1124591332 PLASTIC FILM, 50V 3300PF J
CE1224073053 ELECTROLYTIC, 25V 100UF M 3A
CE1324503213 PLASTIC FILM CF92 T 1500VH 1500PF H
CE1424591471 PLASTIC FILM, 50V 470PF J
CE1524092339 CERAMIC DISC, 2KV 330PF K
CE1624212102 CERAMIC DISC, 50V B 1000PF K
CE1724503041 PLASTIC FILM , 63V 0.1UF J
CE4324503041 PLASTIC FILM , 63V 0.1UF J
CE5024676100 ELECTROLYTIC, 100V 10UF M 3A
CE5124073155 ELECTROLYTIC, 16V 1000UF M 3A
CE5224503041 PLASTIC FILM , 63V 0.1UF J
CE5324214221 CERAMIC DISC, 500V B 220PF K
CE5424503041 PLASTIC FILM , 63V 0.1UF J
CE5524617006 ELECTROLYTIC, 25V 820UF M
CE5624665221 ELECTROLYTIC, 10V 220UF M 3A
CE5724073038 ELECTROLYTIC, 16V 100UF M 3A
CE5824073038 ELECTROLYTIC, 16V 100UF M 3A
CE5924666331 ELECTROLYTIC 04Q, 16V 330UF M 3A
CE6124073020 ELECTROLYTIC, 10V 1000UF M 3A
CE6324666470 ELECTORLYTIC, 16V 47UF M 3A
CE6424503047 PLASTIC FILM, 63V 0.33UF J
CE6524666470 ELECTORLYTIC, 16V 47UF M 3A
CE6624073138 ELECTROLYTIC CE04P 10V 220UF M 3A
CE6724503047 PLASTIC FILM, 63V 0.33UF J
CE6824073138 ELECTROLYTIC CE04P 10V 220UF M 3A
CE6924669339 ELECTROLYTIC, 50V 3.3UF M
CE7124214331 CERAMIC DISC, 500V B 330PF K
CE7224214331 CERAMIC DISC, 500V B 330PF K
CE7324214331 CERAMIC DISC, 500V B 330PF K
CE7424214331 CERAMIC DISC, 500V B 330PF K
CE7524214331 CERAMIC DISC, 500V B 330PF K
CE7624214331 CERAMIC DISC, 500V B 330PF K
CE7924669220 ELECTROLYTIC, 50V 22UF M 3A
CE8024073157 ELECTROLYTIC CE04P 16V 1500UF M 3A
CE8124073157 ELECTROLYTIC CE04P 16V 1500UF M 3A
CE8224676470 ELECTROLYTIC, 100V 47UF M 3A
CE8324073155 ELECTROLYTIC, 16V 1000UF M 3A
CE8424073141 ELECTROLYTIC CE04P 10V 1000UF M 3A
CE8524073158 ELECTROLYTIC CE04P 16V 2200UF M 3A
Parts No. Description
-
18
-
Location
No.
CE8624073133 ELECTROLYTIC CE04P 6.3V 3300UF M 3A
CE8724073141 ELECTROLYTIC CE04P 10V 1000UF M 3A
CE8824073155 ELECTROLYTIC, 16V 1000UF M 3A
CF0124073152 ELECTROLYTIC CE04P 16V 330UF M 3A
CK0124436821 CERAMIC DISC, 50V SL 820PF J
CK0224436821 CERAMIC DISC, 50V SL 820PF J
CK0324436821 CERAMIC DISC, 50V SL 820PF J
CK0424436821 CERAMIC DISC, 50V SL 820PF J
CK0524436821 CERAMIC DISC, 50V SL 820PF J
CK0624436821 CERAMIC DISC, 50V SL 820PF J
CK0724436821 CERAMIC DISC, 50V SL 820PF J
CK0824436821 CERAMIC DISC, 50V SL 820PF J
CK0924436821 CERAMIC DISC, 50V SL 820PF J
CK1024436821 CERAMIC DISC, 50V SL 820PF J
CK1124436821 CERAMIC DISC, 50V SL 820PF J
CR50924203101 ELECTROLYTIC, 16V 100UF M 7L 3A
CS0124092795 CERAMIC CHIP, 6.3V B 2.2UF K
CS0224092795 CERAMIC CHIP, 6.3V B 2.2UF K
CS0524092795 CERAMIC CHIP, 6.3V B 2.2UF K
CS0624092795 CERAMIC CHIP, 6.3V B 2.2UF K
CS0724092795 CERAMIC CHIP, 6.3V B 2.2UF K
CS0824092795 CERAMIC CHIP, 6.3V B 2.2UF K
CS0924092795 CERAMIC CHIP, 6.3V B 2.2UF K
CS1024092795 CERAMIC CHIP, 6.3V B 2.2UF K
CS1124092795 CERAMIC CHIP, 6.3V B 2.2UF K
CS1224092795 CERAMIC CHIP, 6.3V B 2.2UF K
CS1324092795 CERAMIC CHIP, 6.3V B 2.2UF K
CS1424092795 CERAMIC CHIP, 6.3V B 2.2UF K
CS1524092795 CERAMIC CHIP, 6.3V B 2.2UF K
CS1624092795 CERAMIC CHIP, 6.3V B 2.2UF K
CS1724092795 CERAMIC CHIP, 6.3V B 2.2UF K
CS1824092795 CERAMIC CHIP, 6.3V B 2.2UF K
CS1924092795 CERAMIC CHIP, 6.3V B 2.2UF K
CS2024092795 CERAMIC CHIP, 6.3V B 2.2UF K
CS2124085987 ELEC. NONPOLAR, 16V 4.7UF M 7L NP
CS2224085987 ELEC. NONPOLAR, 16V 4.7UF M 7L NP
CS2524109103 CERAMIC CHIP, 50V B 0.01UF K
CS2624794470 ELECTROLYTIC, 16V 47UF M
CS2724794220 ELECTROLYTIC, 16V 22UF M
CS2824794100 ELECTROLYTIC, 16V 10UF M
CS2924794100 ELECTROLYTIC, 16V 10UF M
CS3024794100 ELECTROLYTIC, 16V 10UF M
CS3324092795 CERAMIC CHIP, 6.3V B 2.2UF K
CS3424092795 CERAMIC CHIP, 6.3V B 2.2UF K
CV0124092621 CERAMIC CHIP, 10V B 1UF K
CV0224092621 CERAMIC CHIP, 10V B 1UF K
CV0324092621 CERAMIC CHIP, 10V B 1UF K
CV0424100104 CERAMIC CHIP, 25V F 0.1UF Z
CV0524092621 CERAMIC CHIP, 10V B 1UF K
CV0624092621 CERAMIC CHIP, 10V B 1UF K
CV1124092621 CERAMIC CHIP, 10V B 1UF K
CV1324100104 CERAMIC CHIP, 25V F 0.1UF Z @U103
CV1424092621 CERAMIC CHIP, 10V B 1UF K @U103
CV1524100104 CERAMIC CHIP, 25V F 0.1UF Z @U103
CV2724762471 ELECTROLYTIC, 10V 470UF M
CV2924763101 ELECTROLYTIC, 16V 100UF M
CV3024092730 CERAMIC CHIP, 16V B 0.1UF K
CV3824109102 CERAMIC CHIP, 50V B 1000PF K
CV3924109102 CERAMIC CHIP, 50V B 1000PF K
CV4624092621 CERAMIC CHIP, 10V B 1UF K
CV7024794101 ELECTROLYTIC, 16V 100UF M
CV7124092730 CERAMIC CHIP, 16V B 0.1UF K
CV7224794220 ELECTROLYTIC, 16V 22UF M
Parts No. Description
24794100 ELECTROLYTIC, 16V 10UF M @UV03
24232103 CERAMIC DISC, 50V F 0.01UF Z @UV03
24232103 CERAMIC DISC, 50V F 0.01UF Z @UV03
Location
No.
CV7324092730 CERAMIC CHIP, 16V B 0.1UF K
CV7424092730 CERAMIC CHIP, 16V B 0.1UF K
CV7524092730 CERAMIC CHIP, 16V B 0.1UF K
CV24524092621 CERAMIC CHIP, 10V B 1UF K
CV24624092621 CERAMIC CHIP, 10V B 1UF K
CV24724092621 CERAMIC CHIP, 10V B 1UF K
CV24924092621 CERAMIC CHIP, 10V B 1UF K
CV25024092621 CERAMIC CHIP, 10V B 1UF K
CV25124092621 CERAMIC CHIP, 10V B 1UF K
CY50424109222 CERAMIC CHIP, 50V B 2200PF K
CY50524105120 CERAMIC CHIP, 50V CH 12PF J
CY51224092463 CERAMIC CHIP, 16V B 0.22UF K
PC BOARD ASSY, IR BLASTER 57HX PU PD1289
PC BOARD ASSY, SENSOR UNIT PD1823 SENSOR UNIT
PC BOARD ASSY, MOTOR UNIT PD1824 MTR UNIT
PC BOARD ASSY, IF AUD ACIN PU PD1775C
PC BOARD ASSY, MAIN POWER PU PD1773B-1
PC BOARD ASSY, REMORT SENSOR PU PD1773B-3
PC BOARD ASSY, DOOR SW PU PD1773B-4
PC BD ASSY, FRONT KEY 57HL83 PU PD1503
PC BOARD ASSY, MULTICARD 51H94 PU PD1821A
PC BOARD ASSY DIGITAL, 52HMX94 DSB-SHU153D
PC BOARD ASSY DIGITAL, 62HMX94 DSB-SHU153E
PC BOARD ASSY, SUB POWER HM94 PU PD1820B
PC BOARD ASSY, FAN UNIT 51H94 PU PD1953A
PC BOARD ASSY, FRONT AV PU PD1773B-
2
Location
No.
Parts No. Description
TUNER
H00123321495
H00223148084 IF MODULE, US WOW MSP4440G MVUS53
TUNER, US864M IIC PH 5V PANA ENV56DF3G3F
ACCESSORIES
A701 #123067801 CARTON, CARTON 52HMX94
#223067803 CARTON, CARTON 62HMX94
A703 #123946771 PACKING, TOP PACKING
#223946772 PACKING, TOP PACKING
A708 #123946768 PACKING, BOTTOM PACKING
#223946769 PACKING, BOTTOM PACKING
A709 #123067694 CARTON, BASE TRAY
#223067695 CARTON, BASE TRAY
A710 #123946774 PACKING, SUPPORT POST
#223946775 PACKING, SUPPORT POST
A72123943628 PLYETHLENE COVERING
K91223306562
K91323306531
Y101E23566547
Y101F23566548 OWNERS MANUAL, FRENCH 52HMX94 FRE
Y10223589650
REMOCON HAND UNIT IR, DTVUSA CT-90216
REMOCON IR, BLASTER GLINK VTR CONT.57H93
OWNERS MANUAL, ENGLISH 52HMX94 ENG
WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION", "SAFETY
PRECAUTION" AND "PRODUCT SAFETY NOTICE" ON THE MANUAL FOR THIS MODEL.
CAUTION: The international hazard symbols "" in the schematic diagram and the parts list designate components
which have special characteristics important for safety and should be replaced only with types identical to those in the
original circuit or specified in the parts list. The mounting position of replacements is to be identical with originals.
Before replacing any of these components, read carefully the PRODUCT SAFETY NOTICE on the MANUAL for this
model. Do not degrade the safety of the receiver through improper servicing.
NOTE:
1. RESISTORResistance is shown in ohm [K = 1.000, M = 1.000.000]. All resistors are 1/6W and 5% tolerance
carbon resistor, unless otherwise noted as the following marks.
1/2R = Metal or Metal oxide of 1/2 watt1/2S = Carbon compsistion of 1/2 watt
1RF = Fuse resistor of 1 watt10W = Cement of 10 watt
±
10% G = ±2% F = ±1%
K =
2. CAPACITORUnless otherwise noted in schematic, all capacitor values less than 1 are expressed in
the values more than 1 in pF.
All capacitors are ceramic 50V, unless otherwise noted as the following marks.
Electolytic capacitor
Mylar capacitor
µ
F, and
3. The parts indicated with "
4. Voltages read with DIGITAL MULTI-METER from point indicated to chassing ground, using a color bar signal with
all controls at normal, line voltage at 220 volts.
5. Waveforms are taken receiving color bar signal with enough sensitivity.
6. Voltage reading shown are nominal values and may vary
" have special characteristics, and should be replaced with identical parts only.