Toshiba MFL67652602, 60LA8600, 55LA8600 User Manual

OWNER’S MANUAL

LED TV

* LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating
your set and retain it for future reference.

55LA8600
60LA8600

P/NO : MFL67652602 (1303-REV00)

www.lg.com

2

Short-circuit

Breaker

Power Supply

Short-circuit

Breaker

Power Supply

Short-circuit

Breaker

Power Supply

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your
product.

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to

alert the user to the presence of
uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.

Do not use this apparatus near water.

y

Clean only with a dry cloth.

y

Do not block any ventilation openings. Install in

y

accordance with the manufacturer’s instructions.

Do not install near any heat sources such as

y

radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.

WARNING

If you ignore the warning message, you may be
seriously injured or there is a possibility of accident
or death.

CAUTION

If you ignore the caution message, you may be
slightly injured or the product may be damaged.

NOTE

The note helps you understand and use the product
safely. Please read the note carefully before using
the product.

WARNING

to the State of California to cause cancer and birth
defects or other reproductive harm.

Wash hands after handling.

: This product contains chemicals known

Do not defeat the safety purpose of the polarized

y

or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet (Can differ by
country).

Do not press strongly upon the panel with a hand or

y

a sharp object such as a nail, pencil or pen, or make
a scratch on it.

IMPORTANT SAFETY INSTRUCTIONS

Short-circuit

Breaker

Power Supply

Short-circuit

Breaker

Power Supply

3

Protect the power cord from being walked on

y

or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.

Only use attachments/accessories specified by the

y

manufacturer.

Use only with a cart, stand, tripod, bracket, or table

y

specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.

Unplug this apparatus during lightning storms or

y

when unused for long periods of time.

CAUTION concerning the Power Cord

y

(Can differ by country):
It is recommended that appliances be placed upon a
dedicated circuit; that is, a single outlet circuit which
powers only that appliance and has no additional
outlets or branch circuits. Check the specification
page of this owner’s manual to be certain. Do
not connect too many appliances to the same AC
power outlet as this could result in fire or electric
shock. Do not overload wall outlets. Overloaded
wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or
cracked wire insulation are dangerous. Any of these
conditions could result in electric shock or fire.
Periodically examine the cord of your appliance, and
if its appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part
by an authorized service. Protect the power cord
from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance. Do
not move the TV with the power cord plugged in.
Do not use a damaged or loose power cord. Be sure
do grasp the plug when unplugging the power cord.
Do not pull on the power cord to unplug the TV.

ENGLISH

Refer all servicing to qualified service personnel.

y

Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.

Do not stick metal objects or any other conductive

y

material into the power cord. Do not touch the end
of the power cord while it is plugged in.
Keep the packing anti-moisture material or vinyl

y

packing out of the reach of children. Anti-moisture
material is harmful if swallowed. If swallowed
by mistake, force the patient to vomit and visit
the nearest hospital. Additionally, vinyl packing
can cause suffocation. Keep it out of the reach of
children.

Warning

y

- To reduce the risk of fire or electrical
shock, do not expose this product to rain, moisture
or other liquids. Do not touch the TV with wet
hands. Do not install this product near flammable
objects such as gasoline or candles, or expose the
TV to direct air conditioning.

Do not expose to dripping or splashing and do not

y

place objects filled with liquids, such as vases, cups,
etc. on or over the apparatus (e.g. on shelves above
the unit).

IMPORTANT SAFETY INSTRUCTIONS

4

ENGLISH

Grounding

y

(Except for devices which are not grounded.)
Ensure that you connect the earth ground wire to
prevent possible electric shock (i.e. a TV with a
three-prong grounded AC plug must be connected
to a three-prong grounded AC outlet). If grounding
methods are not possible, have a qualified
electrician install a separate circuit breaker. Do not
try to ground the unit by connecting it to telephone
wires, lightening rods, or gas pipes.

Short-circuit

Breaker

As long as this unit is connected to the AC wall

y

Power Supply

outlet, it is not disconnected from the AC power
source even if the unit is turned off.
Do not attempt to modify this product in any way

y

without written authorization from LG Electronics.
Unauthorized modification could void the user’s
authority to operate this product.

Outdoor Antenna Grounding

y

(Can differ by country):
If an outdoor antenna is installed, follow the
precautions below. An outdoor antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power circuits,
or where it can come in contact with such power
lines or circuits as death or serious injury can occur.
Be sure the antenna system is grounded so as to
provide some protection against voltage surges
and built-up static charges. Section 810 of the
National Electrical Code (NEC) in the U.S.A. provides
information with respect to proper grounding of the
mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge
unit, connection to grounding electrodes and
requirements for the grounding electrode.

Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70

Cleaning

y

When cleaning, unplug the power cord and wipe
gently with a soft cloth to prevent scratching. Do
not spray water or other liquids directly on the TV
as electric shock may occur. Do not clean with
chemicals such as alcohol, thinners or benzine.

Moving

y

Make sure the product is turned off, unplugged
and all cables have been removed. It may take 2 or
more people to carry larger TVs. Do not press or put
stress on the front panel of the TV.

Ventilation

y

Install your TV where there is proper ventilation. Do
not install in a confined space such as a bookcase.
Do not cover the product with cloth or other
materials while plugged. Do not install in excessively
dusty places.
If you smell smoke or other odors coming from

y

the TV, unplug the power cord and contact an
authorized service center.
Keep the product away from direct sunlight.

y

Never touch this apparatus or antenna during a

y

thunder or lightning storm.
When mounting a TV on the wall, make sure not

y

to install the TV by hanging the power and signal
cables on the back of the TV.
Do not allow an impact shock or any objects to fall

y

into the product, and do not drop anything onto the
screen.

Disconnecting the Main Power

y

The power outlet used with this device must remain
easily accessible.
Store the accessories (battery, etc.) in a safe

y

location out of the reach of children.
This apparatus use batteries. In your community

y

there might be regulations that require you
to dispose of these batteries properly due to
environmental considerations. Please contact your
local authorities for disposal or recycling information.
Do not dispose of batteries in a fire.

y

Do not short circuit, disassemble or allow the

y

batteries to overheat.

Ground Clamp

Electric Service

Equipment

Ground Clamp

NEC: National Electrical Code

Antenna Lead in Wire

Antenna Discharge Unit
(NEC Section 810-20)

Grounding Conductor
(NEC Section 810-21)

Power Service Grounding
Electrode System
(NEC Art 250, Part H)

Dot Defect

y

The Plasma or LCD panel is a high technology
product with resolution of two million to six million
pixels. In a very few cases, you could see fine dots
on the screen while you’re viewing the TV. Those
dots are deactivated pixels and do not affect the
performance and reliability of the TV.

Generated Sound

y

“Cracking” noise: A cracking noise that occurs
when watching or turning off the TV is generated by
plastic thermal contraction due to temperature and
humidity. This noise is common for products where
thermal deformation is required.
Electrical circuit humming/panel buzzing: A low level
noise is generated from a high-speed switching
circuit, which supplies a large amount of current
to operate a product. It varies depending on the
product.
This generated sound does not affect the
performance and reliability of the product.
Take care not to touch the ventilation openings.

y

When watching the TV for a long period, the
ventilation openings may become hot. This does
not affect the performance of the product or cause
defects in the product.
If the TV feels cold to the touch, there may be a

y

small “flicker” when it is turned on. This is normal,
there is nothing wrong with TV. Some minute dot
defects may be visible on the screen, appearing as
tiny red, green, or blue spots. However, they have
no adverse effect on the TV’s performance. Avoid
touching the LCD screen or holding your finger(s)
against it for long periods of time. Doing so may
produce some temporary distortion effects on the
screen.

Preventing “Image burn” or “Burn-in” on your TV
screen

IMPORTANT SAFETY INSTRUCTIONS

For USA and Canada

FCC NOTICE

This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the
equipment and the receiver.

- Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.

- Consult the dealer or an experienced radio/TV
technician for help.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference
and (2) this device must accept any interference
received, including interference that may cause
undesired operation of the device.
Any changes or modifications in construction of
this device which are not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.

5

ENGLISH

If a fixed image displays on the TV screen for a long

y

period of time, it will be imprinted and become a
permanent disfigurement on the screen. This is
“image burn” or “burn-in” and not covered by the
warranty.
If the aspect ratio of the TV is set to 4:3 for a

y

long period of time, image burn may occur on the
letterboxed area of the screen.
Avoid displaying a fixed image on the TV screen for

y

a long period of time (2 or more hours for LCD, 1
or more hours for the Plasma TV) to prevent image
burn.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines
for proper grounding and, in particular, specifies
that the cable ground shall be connected to the
grounding system of the building, as close to the
point of the cable entry as practical.

IMPORTANT SAFETY INSTRUCTIONS

6

Viewing 3D Imaging

ENGLISH

WARNING

Viewing Environment

Viewing Time

y

- When watching 3D content, take 5 - 15 minute
breaks every hour. Viewing 3D content for a long
period of time may cause headache, dizziness,
fatigue or eye strain.

Those that have a photosensitive seizure or
chronic illness

Some users may experience a seizure or other

y

abnormal symptoms when they are exposed to a
flashing light or particular pattern from 3D content.
Do not watch 3D videos if you feel nauseous,

y

are pregnant and/ or have a chronic illness such
as epilepsy, cardiac disorder, or blood pressure
disease, etc.
3D Content is not recommended for those who

y

suffer from stereo blindness or stereo anomaly.
Double images or discomfort in viewing may be
experienced.
If you have strabismus (cross-eyed), amblyopia

y

(weak eyesight) or astigmatism, you may have
trouble sensing depth and easily feel fatigue due to
double images. It is advised to take frequent breaks
than the average adult.
If your eyesight varies between your right and left

y

eye, revise your eyesight prior to watching 3D
content.

CAUTION

Viewing Environment

Viewing Distance

y

- Maintain a distance of at least twice the screen
diagonal length when watching 3D content. If
you feel discomfort in viewing 3D content, move
further away from the TV.

Viewing Age

Infants / Children

y

- Usage/ Viewing 3D content for children under the
age of 5 are prohibited.

- Children under the age of 10 may overreact and
become overly excited because their vision is in
development (for example: trying to touch the
screen or trying to jump into it. Special monitoring
and extra attention is required for children watching
3D content.

- Children have greater binocular disparity of 3D
presentations than adults because the distance
between the eyes is shorter than one of adults.
Therefore they will perceive more stereoscopic
depth compared to adults for the same 3D image.

Teenagers

y

- Teenagers under the age of 19 may be stimulated
to light coming from 3D videos. Advise them not
to watch 3D videos for a long time when they are
tired.

Elderly

y

- The elderly may perceive less of a 3D effect than
the youth. Do not sit closer to the TV than the
recommended distance.

Symptoms which require discontinuation or
refraining from watching 3D content

Do not watch 3D content when you feel fatigue

y

from lack of sleep, overwork or intoxication.
When these symptoms are experienced, stop using/

y

watching 3D content and get enough rest until the
symptom subsides.

- Consult your doctor when the symptoms persist.
Symptoms may include headache, eyeball
pain, dizziness, nausea, palpitation, blurriness,
discomfort, double image, visual inconvenience or
fatigue.

Cautions when using the 3D glasses

Only use LG 3D glasses. Otherwise, you may not

y

be able to view 3D videos properly.
Do not use 3D glasses instead of your normal

y

glasses, sunglasses or protective goggles.
Using modified 3D glasses may cause eye strain or

y

image distortion.
Do not keep your 3D glasses in extremely high or

y

low temperatures. It will cause deformation.
The 3D glasses are fragile and are easy to

y

scratched. Use a soft, clean piece of cloth when
wiping the lenses. Do not scratch the lenses of the
3D glasses with sharp objects or clean/wipe them
with chemicals.

LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit ‘www.lg.com’.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for
more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to
play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate
the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on
how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274”

7

ENGLISH

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other
U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and the Symbol
together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product
includes software. © DTS, Inc. All Rights Reserved.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product,
please visit ‘http://opensource.lge.com’.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for
download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such
distribution (such as the cost of media, shipping and handling) upon email request to ‘[e-mail]’. This offer
is valid for three (3) years from the date on which you purchased the product.

TABLE OF CONTENTS

8

TABLE OF CONTENTS

2 IMPORTANT SAFETY INSTRUCTIONS

6 Viewing 3D Imaging

7 LICENSES

7 OPEN SOURCE SOFTWARE NOTICE

8 TABLE OF CONTENTS

9 INSTALLATION PROCEDURE

9 ASSEMBLING AND PREPARING

9 Unpacking
11 Optional Extras
12 Parts and Buttons
13 Lifting and moving the TV
14 Setting up the TV

ENGLISH

14 - Attaching the stand
15 - Mounting on a table
16 - Tidying cables
17 - Mounting on a wall
18 Using Built-in Camera
18 - Preparing Built-in Camera
18 - Name of Parts for the Built-In Camera
18 - Checking the Camera’s Shooting Range

29 MAGIC REMOTE CONTROL

FUNCTIONS

30 Registering Magic Remote Control
30 How to use Magic Remote Control
30 Precautions to Take when Using the Magic

Remote Control

31 WATCHING TV

31 Turning the TV on for the first time

32 USING THE USER GUIDE

33 SPECIFICATIONS

36 EXTERNAL CONTROL DEVICE SETUP

37 MAINTENANCE

37 Cleaning Your TV
37 - Screen, frame, cabinet and stand
37 - Power cord

37 TROUBLESHOOTING

19 MAKING CONNECTIONS

19 Connecting to an antenna or cable
20 Connecting to a HD receiver, DVD Player or VCR
20 - HDMI Connection
21 - DVI to HDMI Connection
22 - Connecting to a mobile phone
23 - Component Connection
24 - Composite Connection
25 Connecting a PC
25 - HDMI Connection or DVI to HDMI Connection
27 Connecting to an Audio System
27 - Digital Optical Audio Connection
28 Connecting Headphones
28 Connecting a USB Device

NOTE

Image shown may differ from your TV.

y

Your TV’s OSD (On Screen Display) may differ

y

slightly from that shown in this manual.
The available menus and options may differ from

y

the input source or product model that you are
using.
New features may be added to this TV in the

y

future.

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

INSTALLATION PROCEDURE

Open the package and make sure all the accessories are included.

1

Attach the stand to the TV set.

2

Connect an external device to the TV set.

3

Make sure the network connection is available.

4

You can use the TV network functions only when the network connection is made.

ASSEMBLING AND PREPARING

Unpacking

9

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you
purchased your product. The illustrations in this manual may differ from the actual product and item.

CAUTION

Do not use any unapproved items to ensure the safety and product life span.

y

Any damages or injuries by using unapproved items are not covered by the warranty.

y

Some models appear to have a thin film on the screen. It is actually part of the screen, do not remove it.

y

NOTE

The items supplied with your product may vary depending on the model.

y

Product specifications or contents of this manual may be changed without prior notice due to upgrade of product

y

functions.
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches)

y

thick and 18 mm (0.7 inches) width.
Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV's

y

USB port.

B

A

*A 10 mm (0.39 inches)
*B

18 mm (0.7 inches)

B

A

ENGLISH

ASSEMBLING AND PREPARING

10

ENGLISH

Magic Remote Control,
Batteries (AA)

(See p. 29)

Cinema 3D Glasses

The number of 3D glasses may
differ depending on the model
or country.

Cable Holder

(See p. 16)

Owner’s Manual Power Cord

Stand Screws

4EA, M4 x 16

Stand Base

(See p. 14)

(See p. 14)

Component video cable

(See p. 23)

Composite video cable

(See p. 23,24)

Tag On

Tag On

ASSEMBLING AND PREPARING

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
The model name or design may be changed manufacturer’s circumstances or policies.

11

AN-MR400

Magic Remote

LG Audio device Tag On AN-BL***

AG-F***

Cinema 3D Glasses

Tag On

AG-F***DP

Dual Play Glasses

Wireless IR Blaster
(Depending on model)

ENGLISH

ASSEMBLING AND PREPARING

SETTINGS

INPUT

OK

12

Parts and Buttons

ENGLISH

Screen

Speakers

Video call camera

Remote control and

Intellgent sensors.

Logo light

Buttons

1

Button Description

/ (^ / v)

/ (+ / -)

(OK ⊙)

(SETTINGS)

(INPUT )

( / I)

Scrolls through the saved channels.

Adjusts the volume level.

Selects the highlighted menu option or confirms an input.

Accesses the main menus, or saves your input and exits the menus.

Changes the input source.

Turns the power on or off.

1.Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

Lifting and moving the TV

When moving or lifting the TV, read the following to
prevent the TV from being scratched or damaged and for
safe transportation regardless of its type and size.

CAUTION

Avoid touching the screen at all times, as this may

y

result in damage to the screen.

It is recommended to move the TV in the box or

y

packing material that the TV originally came in.
Before moving or lifting the TV, disconnect the

y

power cord and all cables.
When holding the TV, the screen should face away

y

from you to avoid damage.

Hold the top and bottom of the TV frame firmly.

y

Make sure not to hold the transparent part, speaker,
or speaker grill area.

ASSEMBLING AND PREPARING

13

ENGLISH

When transporting a large TV, there should be at

y

least 2 people.
When transporting the TV by hand, hold the TV as

y

shown in the following illustration.

When transporting the TV, do not expose the TV to

y

jolts or excessive vibration.
When transporting the TV, keep the TV upright,

y

never turn the TV on its side or tilt towards the left
or right.

ASSEMBLING AND PREPARING

14

Setting up the TV

You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other
furniture.

Attaching the stand

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

CAUTION

When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to

y

protect the screen from scratches.
Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward

y

after being installed.)
Do not tighten the screws with too much force; otherwise they may be damaged and come loose later.

y

NOTE

Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

y

ENGLISH

Wrapping bag
(Depending on model)

2

3

Front

Stand Base

41

M4 x 16

2 EA

M4 x 16

2 EA

ASSEMBLING AND PREPARING

15

Mounting on a table

Lift and tilt the TV into its upright position on a table.

1

- Leave a

Connect the power cord to a wall outlet.

2

10 cm (4 inch) (minimum)

the wall for proper ventilation.

10 cm

(4

in

10 cm

ch

CAUTION

Do not place the TV near or on sources of heat, as

y

this may result in fire or other damage.

space from

es)

10 cm

10 cm

Adjusting the angle of the TV to suit view

Swivel 8 degrees to the left or right and adjust the angle
of the TV to suit your view.

8˚8˚

ENGLISH

CAUTION

Install the product on a flat surface for easy swivel.

y

Make sure to use the TV cabinet or stand that can
properly support the TV.
After installing the TV, the angle of the screen can

y

be adjusted to the left or right.
When adjusting the angle, make sure there are

y

no objects near the TV and the TV has enough
distance from the wall. A space of at least 5 cm
on the front and 10 cm on the back should be
available. Otherwise, the product could fall due to
balance problems, which may cause personal injury
or damage to the product.

ASSEMBLING AND PREPARING

16

(Depending on model)

1

ENGLISH

2

Securing the TV to a wall (optional)

Insert and tighten the eye-bolts, or TV brackets and

bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts position,

remove the bolts first.

Mount the wall brackets with the bolts to the wall.

Match the location of the wall bracket and the eye­bolts on the rear of the TV.

Tidying cables

Gather and bind the cables with the cable holder on

1

the back of the TV.

Cable Holder

Gather and bind the cables with the cable

2

management clip.

Connect the eye-bolts and wall brackets tightly with

3

a sturdy rope.
Make sure to keep the rope horizontal with the flat
surface.

CAUTION

Make sure that children do not climb on or hang on

y

the TV.

NOTE

Use a platform or cabinet that is strong and large

y

enough to support the TV securely.
Brackets, bolts and ropes are optional. You can

y

obtain additional accessories from your local dealer.

Cable Management Clip

CAUTION

Do not move the TV by holding the cable holder

y

and cable management clip, as the cable holders
may break, and injuries and damage to the TV may
occur.