Toshiba 60LA7400, 47LA7400, 55LA7400, 55LA6900, 47LA6900 User Manual

...
OWNER’S MANUAL
LED TV
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for future reference.
47LA6900 55LA6900
P/NO : MFL67652612 (1302-REV01)
47LA6950 55LA6950
47LA7400 55LA7400 60LA7400
www.lg.com
2
Short-circuit
Breaker
Power Supply
Short-circuit
Breaker
Power Supply
Short-circuit
Breaker
Power Supply
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
Do not use this apparatus near water.
y
Clean only with a dry cloth.
y
Do not block any ventilation openings. Install in
y
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as
y
radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
If you ignore the caution message, you may be slightly injured or the product may be damaged.
The note helps you understand and use the product safely. Please read the note carefully before using the product.
WARNING
to the State of California to cause cancer and birth defects or other reproductive harm.
Wash hands after handling.
WARNING
CAUTION
NOTE
: This product contains chemicals known
Do not defeat the safety purpose of the polarized
y
or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).
Do not press strongly upon the panel with a hand or
y
a sharp object such as a nail, pencil or pen, or make a scratch on it.
IMPORTANT SAFETY INSTRUCTIONS
Short-circuit
Breaker
Power Supply
Short-circuit
Breaker
Power Supply
3
Protect the power cord from being walked on
y
or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the
y
manufacturer.
Use only with a cart, stand, tripod, bracket, or table
y
specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or
y
when unused for long periods of time.
CAUTION concerning the Power Cord
y
(Can differ by country): It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.
ENGLISH
Refer all servicing to qualified service personnel.
y
Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Do not stick metal objects or any other conductive
y
material into the power cord. Do not touch the end of the power cord while it is plugged in. Keep the packing anti-moisture material or vinyl
y
packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
Warning
y
- To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.
Do not expose to dripping or splashing and do not
y
place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).
IMPORTANT SAFETY INSTRUCTIONS
4
ENGLISH
Grounding
y
(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
Short-circuit
Breaker
As long as this unit is connected to the AC wall
y
Power Supply
outlet, it is not disconnected from the AC power source even if the unit is turned off. Do not attempt to modify this product in any way
y
without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.
Outdoor Antenna Grounding
y
(Can differ by country): If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.
Antenna grounding according to the National Electrical Code, ANSI/NFPA 70
Cleaning
y
When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine.
Moving
y
Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.
Ventilation
y
Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places. If you smell smoke or other odors coming from
y
the TV, unplug the power cord and contact an authorized service center. Keep the product away from direct sunlight.
y
Never touch this apparatus or antenna during a
y
thunder or lightning storm. When mounting a TV on the wall, make sure not
y
to install the TV by hanging the power and signal cables on the back of the TV. Do not allow an impact shock or any objects to fall
y
into the product, and do not drop anything onto the screen.
Disconnecting the Main Power
y
The power outlet used with this device must remain easily accessible. Store the accessories (battery, etc.) in a safe
y
location out of the reach of children. This apparatus use batteries. In your community
y
there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information. Do not dispose of batteries in a fire.
y
Do not short circuit, disassemble or allow the
y
batteries to overheat.
Ground Clamp
Electric Service
Equipment
Ground Clamp
NEC: National Electrical Code
Antenna Lead in Wire
Antenna Discharge Unit (NEC Section 810-20)
Grounding Conductor (NEC Section 810-21)
Power Service Grounding Electrode System (NEC Art 250, Part H)
Dot Defect
y
The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.
Generated Sound
y
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product. Take care not to touch the ventilation openings.
y
When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product. If the TV feels cold to the touch, there may be a
y
small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.
Preventing “Image burn” or “Burn-in” on your TV screen
IMPORTANT SAFETY INSTRUCTIONS
For USA and Canada
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
5
ENGLISH
If a fixed image displays on the TV screen for a long
y
period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. If the aspect ratio of the TV is set to 4:3 for a
y
long period of time, image burn may occur on the letterboxed area of the screen. Avoid displaying a fixed image on the TV screen for
y
a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
IMPORTANT SAFETY INSTRUCTIONS
6
Viewing 3D Imaging
ENGLISH
WARNING
Viewing Environment
Viewing Time
y
- When watching 3D content, take 5 - 15 minute breaks every hour. Viewing 3D content for a long period of time may cause headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or chronic illness
Some users may experience a seizure or other
y
abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D content. Do not watch 3D videos if you feel nauseous,
y
are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc. 3D Content is not recommended for those who
y
suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced. If you have strabismus (cross-eyed), amblyopia
y
(weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult. If your eyesight varies between your right and left
y
eye, revise your eyesight prior to watching 3D content.
CAUTION
Viewing Environment
Viewing Distance
y
- Maintain a distance of at least twice the screen diagonal length when watching 3D content. If you feel discomfort in viewing 3D content, move further away from the TV.
Viewing Age
Infants / Children
y
- Usage/ Viewing 3D content for children under the age of 5 are prohibited.
- Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D content.
- Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.
Teenagers
y
- Teenagers under the age of 19 may be stimulated to light coming from 3D videos. Advise them not to watch 3D videos for a long time when they are tired.
Elderly
y
- The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the recommended distance.
Symptoms which require discontinuation or refraining from watching 3D content
Do not watch 3D content when you feel fatigue
y
from lack of sleep, overwork or intoxication. When these symptoms are experienced, stop using/
y
watching 3D content and get enough rest until the symptom subsides.
- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.
Cautions when using the 3D glasses
Only use LG 3D glasses. Otherwise, you may not
y
be able to view 3D videos properly. Do not use 3D glasses instead of your normal
y
glasses, sunglasses or protective goggles. Using modified 3D glasses may cause eye strain or
y
image distortion. Do not keep your 3D glasses in extremely high or
y
low temperatures. It will cause deformation. The 3D glasses are fragile and are easy to
y
scratched. Use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.
LICENSES / OPEN SOURCE SOFTWARE NOTICE
LICENSES
Supported licenses may differ by model. For more information about licenses, visit ‘www.lg.com’.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. “DivX Certified® to play DivX® video up to HD 1080p, including premium content.” “DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.” “Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274”
7
ENGLISH
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit ‘http://opensource.lge.com’. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to ‘opensource@lge.com’. This offer is valid for three (3) years from the date on which you purchased the product.
TABLE OF CONTENTS
8
TABLE OF CONTENTS
2 IMPORTANT SAFETY INSTRUCTIONS
6 Viewing 3D Imaging
7 LICENSES
7 OPEN SOURCE SOFTWARE NOTICE
8 TABLE OF CONTENTS
9 INSTALLATION PROCEDURE
9 ASSEMBLING AND PREPARING
9 Unpacking 11 Optional Extras 12 Parts and Buttons 13 Lifting and moving the TV 14 Setting up the TV
ENGLISH
14 - Attaching the stand 15 - Mounting on a table 16 - Tidying cables 17 - Mounting on a wall
18 MAKING CONNECTIONS
18 Connecting to an antenna or cable 19 Connecting to a HD receiver, DVD Player or VCR 19 - HDMI Connection 20 - DVI to HDMI Connection 21 - Connecting to a mobile phone 22 - Component Connection 23 - Composite Connection 24 Connecting a PC 24 - HDMI Connection DVI to HDMI Connection 26 Connecting to an Audio System 26 - Digital Optical Audio Connection 27 Connecting Headphones 27 Connecting a USB Device
28 MAGIC REMOTE CONTROL
FUNCTIONS
29 Registering Magic Remote Control 29 How to use Magic Remote Control 29 Precautions to Take when Using the Magic
Remote Control
30 WATCHING TV
30 Turning the TV on for the first time
31 USING THE USER GUIDE
32 SPECIFICATIONS
36 EXTERNAL CONTROL DEVICE SETUP
37 MAINTENANCE
37 Cleaning Your TV 37 - Screen, frame, cabinet and stand 37 - Power cord
37 TROUBLESHOOTING
NOTE
Image shown may differ from your TV.
y
Your TV’s OSD (On Screen Display) may differ
y
slightly from that shown in this manual. The available menus and options may differ from
y
the input source or product model that you are using. New features may be added to this TV in the
y
future.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
INSTALLATION PROCEDURE
Open the package and make sure all the accessories are included.
1
Attach the stand to the TV set.
2
Connect an external device to the TV set.
3
Make sure the network connection is available.
4
You can use the TV network functions only when the network connection is made.
ASSEMBLING AND PREPARING
Unpacking
9
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
Do not use any unapproved items to ensure the safety and product life span.
y
Any damages or injuries by using unapproved items are not covered by the warranty.
y
Some models appear to have a thin film on the screen. It is actually part of the screen, do not remove it.
y
NOTE
The items supplied with your product may vary depending on the model.
y
Product specifications or contents of this manual may be changed without prior notice due to upgrade of product
y
functions. For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches)
y
thick and 18 mm (0.7 inches) width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV's
y
USB port.
B
A
*A 10 mm (0.39 inches) *B
18 mm (0.7 inches)
B
A
ENGLISH
ASSEMBLING AND PREPARING
10
ENGLISH
Magic Remote Control, Batteries (AA)
(See p.28)
Cinema 3D Glasses
The number of 3D glasses may differ depending on the model or country.
Stand Base
(See p.14)
Owner’s Manual Power Cord
Stand Screws
4 EA, M4 x 20
Cable Holder
(See p.16)
(See p.14)
Tag On
Tag On
Near Field Communication (NFC) tag.
ASSEMBLING AND PREPARING
Optional Extras
Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. The model name or design may be changed manufacturer’s circumstances or policies.
11
AN-MR400
Magic Remote
AN-VC***
Video Call Camera
AG-F***
Cinema 3D Glasses. All glasses with the Cinema 3D logo support the TVs in this manual.
Tag On
Tag On
Near Field Communication (NFC) tag.
AG-F**DP
Dual Play Glasses. For playing head-to-head games. Converts most 2 player split-screen games to full screen.
ENGLISH
LG Audio device
ASSEMBLING AND PREPARING
SETTINGS
INPUT
OK
SETTINGS
INPUT
OK
12
Parts and Buttons
For LA6900, LA6950 series, 47, 55LA7400
Screen
ENGLISH
Speakers
For 60LA7400
Screen
Speakers
Remote control and Intellgent sensors
Logo light
Remote control and Intellgent sensors
1
Logo light
Buttons
1
Buttons
Button Description
/ ( / )
/ ( / )
(OK )
(
SETTINGS
(
INPUT
( )
)
)
1. Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
Scrolls through the saved channels.
Adjusts the volume level.
Selects the highlighted menu option or confirms an input.
Accesses the main menus, or saves your input and exits the menus.
Changes the input source.
Turns the power on or off.
Lifting and moving the TV
When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
CAUTION
Avoid touching the screen at all times, as this may
y
result in damage to the screen.
It is recommended to move the TV in the box or
y
packing material that the TV originally came in. Before moving or lifting the TV, disconnect the
y
power cord and all cables. When holding the TV, the screen should face away
y
from you to avoid damage.
Hold the top and bottom of the TV frame firmly.
y
Make sure not to hold the transparent part, speaker, or speaker grill area.
ASSEMBLING AND PREPARING
13
ENGLISH
When transporting a large TV, there should be at
y
least 2 people. When transporting the TV by hand, hold the TV as
y
shown in the following illustration.
When transporting the TV, do not expose the TV to
y
jolts or excessive vibration. When transporting the TV, keep the TV upright,
y
never turn the TV on its side or tilt towards the left or right.
ASSEMBLING AND PREPARING
14
Setting up the TV
You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture.
Attaching the stand
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
CAUTION
When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to
y
protect the screen from scratches. Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward
y
after being installed.) Do not tighten the screws with too much force; otherwise they may be damaged and come loose later.
y
NOTE
Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
y
ENGLISH
1
Wrapping bag
2
(Depending on model)
3
Front
Stand Base
4
M4 x 20
2 EA
M4 x 20
2 EA
ASSEMBLING AND PREPARING
15
Mounting on a table
Lift and tilt the TV into its upright position on a table.
1
- Leave a 10 cm (minimum) space from the wall for proper ventilation.
10 cm (4 inches)
10 cm
Connect the power cord to a wall outlet.
2
CAUTION
Do not place the TV near or on sources of heat, as
y
this may result in fire or other damage.
10 cm
10 cm
Adjusting the angle of the TV to suit view
Swivel 10 degrees to the left or right and adjust the angle of the TV to suit your view. (For 47LA6900, 47LA7400)
1010
Swivel 8 degrees to the left or right and adjust the angle of the TV to suit your view. (For 55LA6900, 55LA6950, 55LA7400, 60LA7400)
8
8
ENGLISH
CAUTION
Install the product on a flat surface for easy swivel.
y
Make sure to use the TV cabinet or stand that can properly support the TV. After installing the TV, the angle of the screen can
y
be adjusted to the left or right. When adjusting the angle, make sure there are
y
no objects near the TV and the TV has enough distance from the wall. A space of at least 5 cm on the front and 10 cm on the back should be available. Otherwise, the product could fall due to balance problems, which may cause personal injury or damage to the product.
ASSEMBLING AND PREPARING
16
(Depending on model)
1
ENGLISH
2
Securing the TV to a wall (optional)
⨲㘶ᖂ2
㏪ⱞ⋾#Ɐᴏ
Insert and tighten the eye-bolts, or TV brackets and
bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts position, remove the bolts first.
Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye­bolts on the rear of the TV.
Tidying cables
Gather and bind the cables with the cable holder on
1
the back of the TV.
Gather and bind the cables with the cable
2
management clip.
Cable Holder
Connect the eye-bolts and wall brackets tightly with
3
a sturdy rope. Make sure to keep the rope horizontal with the flat surface.
CAUTION
Make sure that children do not climb on or hang on
y
the TV.
NOTE
Use a platform or cabinet that is strong and large
y
enough to support the TV securely. Brackets, bolts and ropes are optional. You can
y
obtain additional accessories from your local dealer.
Cable Management Clip
CAUTION
Do not move the TV by holding the cable holder
y
and cable management clip, as the cable holders may break, and injuries and damage to the TV may occur.
Loading...
+ 36 hidden pages