Toshiba 36AF12 User Manual

Toshiba

Welcome to

your TV

Connecting

Using the

Remote Control

Color Television

36AF12

Owner’s Manual

your TV

Setting up

Features

Using the TV’s

Appendix

23565709

Dear Customer,

Thank you for purchasing this Toshiba TV. This manual will help you use the many exciting features of your new TV.

Before operating the TV, please read this manual completely, and keep it nearby for future reference.

Child Safety

It Makes A Difference Where Your TV Stands

Safety Precautions

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning symbol in the triangle tells you that the voltage inside this product may be strong enough to cause an electric shock. DO NOT TRY TO SERVICE THIS PRODUCT YOURSELF.

The exclamation mark in the triangle tells you that important operating and maintenance instructions follow this symbol.

NOTE TO CATV INSTALLERS IN THE USA

This is a reminder to call the CATV system installer’s attention to Article 820-40 of the NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. For additional antenna grounding information, see items 24 and 25 on page 4.

NOTICE OF POSSIBLE TV STAND INSTABILITY

DANG ER: RISK OF SERIOUS PERSONAL INJURY OR DEATH!

the TOSHIBA TV stand recommended in the “Specifications” section only. result in instability, causing possible injury or death.

NOTICE OF POSSIBLE ADVERSE EFFECTS

ON TV PICTURE TUBE

If a fixed (non-moving) pattern remains on the TV screen for long periods of time, the image can become permanently engrained in the picture tube. This type of

damage is NOT COVERED BY YOUR WARRANTY.

See item 32 on page 4.

Use this TV with

Use with other stands may

Congratulations on your purchase! As you enjoy your new TV, keep these safety tips in mind:

The Issue

 If you are like most Americans, you have a TV in your home.

Many homes, in fact, have more than one TV.

 The home theater entertainment experience is a growing

trend, and larger TVs are popular purchases; however, they are not always supported on the proper TV stands.

 Sometimes TVs are improperly secured or inappropriately

situated on dressers, bookcases, shelves, desks, audio speakers, chests, or carts. As a result, TVs may fall over, causing unnecessary injury.

Toshiba Cares!

 The consumer electronics industry

is committed to making home

entertainment enjoyable and safe.

 The Consumer Electronics

Association formed the Home

Entertainment Support Safety

Committee, comprised of TV and consumer electronics furniture

manufacturers, to advocate

children’s safety and educate

consumers and their families about

television safety.

Tune Into Safety

 One size does NOT fit all! Use appropriate

furniture large enough to support the weight of your

TV (and other electronic components).

 Use appropriate angle braces, straps, and anchors to secure

your furniture to the wall (but never screw anything directly into the TV).

 Carefully read and understand the other enclosed

instructions for proper use of this product.

 Do not allow children to climb on or play with furniture

and TVs.

 Avoid placing any item on top of your TV (such as a VCR,

remote control, or toy) that a curious child may reach for.

 Remember that children can become excited while watching

a program and can potentially push or pull a TV over.

 Share our safety message about this hidden hazard of

home with your family and friends. Thank you!

2500 Wilson Blvd. Arlington, VA 22201 U.S.A. Tel. 703-907-7600 Fax 703-907-7690 www.CE.org

CEA is the Sponsor, Producer and

Manager of the International CES

the

FEB02

Important Safety Instructions

QUALIFIED

SERVICE

TECHNICIAN

Installation, Care, and Service

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near

water.

6) Clean only with a dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Wide plug

Installation

Follow these recommendations and precautions and heed all warnings when installing your TV:

15) Never modify this equipment. Changes or modifications may void: a) the warranty, and b) the user’s authority to operate this equipment under the rules of the Federal Communications Commission.

16) DANGER: RISK OF SERIOUS PERSONAL

INJURY, DEATH, OR EQUIPMENT DAMAGE! Never place the TV on

an unstable cart, stand, or table. The TV may fall, causing serious personal injury, death, or serious damage to the TV.

17) Never place or store the TV in direct sunlight; hot, humid areas; areas subject to excessive dust or vibration; or locations with temperatures at or below 41°F (5°C).

18) Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit.

19) Never place items such as vases, aquariums, or candles on top of the TV.

10) Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where it exits the apparatus.

11) Only use attachments/accessories specified by the

manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during

lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

20) Never block or cover the slots or openings in the TV cabinet back, bottom, and sides. Never place the TV:

• on a bed, sofa, rug, or similar

surface;

• too close to drapes, curtains,

or walls; or

• in a confined space such as a

bookcase, built-in cabinet, or any other place with poor ventilation.

The slots and openings are provided to protect the TV from overheating and to help maintain reliable operation of the TV.

21) Never allow anything to rest on or roll over the power cord, and never place the TV where the power cord is subject to wear or abuse.

22) Never overload wall outlets and extension cords.

FEB02

Ground clamp

Antenna discharge unit (NEC Section 810-20)

Grounding conductors (NEC Section 810-21)

Power service grounding electrode system (NEC Art 250 Part H)

Ground clamps

Antenna lead-in wire

Electric service equipment

QUALIFIED

SERVICE

TECHNICIAN

23) Always operate this equipment from a 120 VAC, 60 Hz power source only.

29) [This item applies to projection TVs only.] If the air temperature rises suddenly (for example, when the TV is first delivered), condensation may form on the lenses. This can make the picture appear distorted or the color appear faded. If this happens, turn off the TV for 6 to 7 hours to allow the condensation to evaporate.

24) Always make sure the antenna system is properly grounded to provide adequate protection against voltage surges and built-up static charges (see Section 810 of the National Electric Code).

25) DANGER: RISK OF SERIOUS PERSONAL

INJURY OR DEATH!

• Use extreme care to make sure you are never in a position where your body (or any item you are in contact with, such as a ladder or screwdriver) can accidentally touch overhead power lines. Never locate the antenna near overhead power lines or other electrical circuits.

• Never attempt to install any of the following during lightning activity: a) an antenna system; or b) cables, wires, or any home theater component connected to an antenna or phone system.

30)For added protection of your TV from lightning and power surges, always unplug the power cord and disconnect the antenna from the TV if you leave the TV unattended or unused for long periods of time.

31) During normal use, the TV may make occasional snapping or popping sounds. This is normal, especially when the unit is being turned on or off. If these sounds become frequent or continuous, unplug the power cord and contact a Toshiba Authorized Service Center.

32) Possible Adverse Effects on TV Picture Tube: If a fixed (non-moving) pattern remains on the TV screen for long periods of time, the image can become permanently engrained in the picture tube and cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your TV on for long periods of time while it is displaying the following formats or images:

• Fixed Images, such as PIP/POP windows, stock tickers,

video game patterns, TV station logos, and websites.

• Special Formats that do not use the entire screen. For

example, viewing letterbox style (16:9) media on a normal (4:3) display (gray bars at top and bottom of screen); or viewing normal style (4:3) media on a widescreen (16:9) display (gray bars on left and right sides of screen).

Care

For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions:

26) Always sit approximately 10–25 feet away from the TV and as directly in front of it as possible. The picture can appear dull if you sit too far to the left or right of the TV, or if sunlight or room lights reflect on the screen. Turn the TV off to check for reflections on the screen, and then remove the source of reflections while viewing the TV.

27) Always unplug the TV before cleaning. Never use liquid or aerosol cleaners.

28) WARNI NG: RISK OF ELECTRIC SHOCK!

FEB02

Never spill liquids or push objects of any kind into the TV cabinet slots.

Service

33) WARNI NG: RISK OF ELECTRIC SHOCK! Never attempt to service the

TV yourself. Opening and

removing the covers may expose you to dangerous voltage or other hazards. Refer all servicing to a Toshiba Authorized Service Center.

34) If you have the TV serviced:

• Ask the service technician to use only replacement parts specified by the manufacturer.

• Upon completion of service, ask the service technician to perform routine safety checks to determine that the TV is in safe operating condition.

35) When the TV reaches the end of its useful life, ask a qualified service technician to properly dispose of the TV. Improper disposal may result in a picture tube implosion and possible personal injury.

Important Safety Information ........................ 2-4

Welcome to Toshiba ............................................ 6

Exploring your new TV ............................................. 6

Selecting a location for the TV................................... 6

Notice of possible TV stand instability .................. 6

Connecting your TV ............................................. 7

Note regarding picture quality .............................. 7

Connecting a VCR .................................................... 7

Connecting a cable converter box ..............................8

Connecting a cable converter box and VCR............... 8

Connecting a DVD player or satellite receiver and a

VCR ..........................................................................9

Connecting a DVD player with ColorStream

(component video) and a VCR ................................ 10

Connecting two VCRs ............................................. 10

Connecting a camcorder ..........................................11

Connecting an audio amplifier................................. 11

Using the remote control ................................. 12

Preparing the remote control for use ........................ 12

Installing the remote control batteries ......................12

Using the remote control with a VCR or

cable TV converter ................................................... 12

Programming the remote control for use with

a non-Toshiba VCR or cable TV converter .............. 13

VCR code table................................................... 13

Cable TV converter code table ............................ 14

Learning about the remote control ........................... 15

Setting up your TV ............................................. 16

Changing the on-screen display language .................16

Selecting the antenna input ...................................... 16

Selecting the signal source ........................................ 17

Programming channels into the TV’s memory ......... 17

Programming channels automatically .................. 17

Adding and erasing channels manually................ 18

Changing channels................................................... 18

Image tilt correction................................................. 18

Using the TV’s features..................................... 19

Adjusting the channel settings .................................. 19

Switching between two channels .............................. 19

Programming your favorite channels ........................19

Using the V-Chip Control (blocking) feature ...........20

Selecting a PIN code ........................................... 20

Changing your PIN code ....................................21

Blocking programs by ratings ..............................22

Ratings definitions (MPAA, Youth TV, TV)........ 22

Unblocking programs temporarily ...................... 23

Blocking unrated movies and programs...............23

Blocking channels ...............................................24

Locking video inputs ...............................................25

Channel labels .........................................................26

Video labels ............................................................. 27

Watching picture-in-picture (PIP) ............................ 28

Switching the main and small pictures ................28

Changing the location of the PIP window...........29

Freezing the PIP display ......................................29

Watching multi-window PIP .............................. 29

Adjusting the picture ............................................... 30

Adjusting the picture quality ...............................30

Selecting the color temperature ...........................30

Adjusting the picture preference.......................... 31

Displaying on-screen information ............................31

Setting the off timer .................................................31

Auto power off ......................................................... 31

Using the closed caption feature............................... 32

Adjusting the sound ................................................. 33

Muting the sound ...............................................33

Selecting stereo/SAP broadcasts ..........................33

Adjusting the sound quality ................................ 34

Using the surround sound feature .......................34

Selecting variable audio OUT .............................35

Turning off the built-in speakers ......................... 35

Using the sub-bass system (SBS) .........................36

Viewing the demonstration (DEMO) mode ............36

Understanding the last mode memory feature ..........36

Appendix .............................................................. 37

Tr oubleshooting ....................................................... 37

Cleaning and care .................................................... 38

Specifications ...........................................................38

Limited United States warranty................................ 39

Limited Canada warranty ........................................40

Toshiba

Welcome to

Welcome to Toshiba

Congratulations! You have purchased one of the finest color TVs on the market. The goal of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible. You may need to purchase other audio or video cables to connect your equipment. See “Connecting your TV” on page 7 for more information.

Please read all safety and operating instructions carefully before you proceed.

your TV

Connecting

Exploring your new TV

You can operate your TV using the buttons on the front panel or the remote control. The front and back panels provide all the terminal connections you will need to connect other equipment to your TV.

Using the

Remote Control

36AF61

36AF12 – Front

DEMO MENU TV/VIDEO VOLUME CHANNEL

VIDEO

R L/MONO AUDIO

VIDEO-3 IN

POWER

VIDEO

L/MONO

VIDEO-3 IN

AUDIO

TV/Video

Demo

DEMO MENU TV/VIDEO VOLUME CHANNEL

Volume

Channel

POWER

CABLE

VCR

100

C.CAPT

FAV

RESET

STOP SOURCE

REC

POWER

LIGHT

RECALL

MUTE TV/VIDEO TIMER

VOL

CH RTN

ENT

ADV/

PIP CH

ENTER

EXIT

ADV/

PIP CH

PLAY PIP

TV/VCR REW FF

STILL LOCATE SWAP

CT-9946

FAV

your TV

Setting up

Features

Using the TV’s

Appendix

36AF12 – Back

ANT (75Ω)

ANT-1OUT ANT-2

OUT

DVD IN

S-VIDEO COLOR STREAM

INPUT

VIDEO

L/MONO

L/MONO L

AUDIO

VIDEO 1VIDEO 2

Video 3

(behind door)

ANT-1 OUT ANT-2

OUT

VIDEO

L/MONO

AUDIO

ColorStream

(component video)

ANT (75Ω)

AUDIO

DVD IN

COLOR STREAM INPUT

Video 2

VIDEO 1VIDEO 2

Video 1

S-VIDEO

VIDEO

L/MONO

AUDIO

Selecting a location for the TV

•Place the TV on the floor or on the optional TV stand listed in the “Specifications” section.

•Place the TV in a location where light does not directly hit the screen.

•Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause overheating, which may damage the TV.

The model and serial numbers are on the back of your TV. Record these numbers in the space below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV.

Remote Sensor

Index

Reference

Model number: ________________________ Serial number: ________________________

Connecting your TV

Note: Cables are not supplied with your TV.



Coaxial cable is the cable that comes in from your antenna, cable TV service, or cable converter box. Coaxial cable uses “F” connectors.



Standard stereo A/V cables usually come in sets of three, and are typically color-coded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio. Your TV’s standard A/V inputs are color-coded in the same manner as the cables.



S-Video cable is for use with video equipment that has S-Video connectors.



Component video cables come in sets of three (typically color-coded red, green, and blue), and are for use with video equipment that has component video connectors. Your TV’s ColorStream the same manner as the cables.

NOTE REGARDING PICTURE QUALITY

When connecting video equipment to your Toshiba TV:



For GOOD picture quality: Use a standard yellow video cable.



For BETTER picture quality: If your equipment has S-video connectors, use an S-video cable instead of a standard yellow video cable. (You still must connect the standard red and white audio cables for full system connection, but do not connect a standard yellow video cable at the same time or the picture performance will be unacceptable.)



For BEST picture quality: If your equipment has component video connectors, use component video cables instead of a standard yellow video cable or S-video cable. (You still must connect the standard red and white audio cables for full system connection.)

(component video) inputs are color-coded in

Coaxial (antenna) cable

Standard stereo A/V cables (typically color-coded yellow for video, red and white for audio)

S-video cable

Component video cables (typically color-coded red, green, blue)

CAUTION: Do not plug in any power cords until you have finished connecting all equipment.

Toshiba

Welcome to

your TV

Connecting

Using the

Remote Control

Connecting a VCR

This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel.

You will need:

• two coaxial cables (one or more may be provided by your cable company)

• one pair of audio cables (one single audio cable for a mono VCR)

• one video cable

Stereo VCR

From Cable or Antenna

ANT (75Ω)

ANT-1 OUT ANT-2

OUT

VIDEO

L/MONO

AUDIO

VIDEO AUDIO

DVD IN

COLOR STREAM

INPUT

AUDIO

OUT

IN from ANT

VIDEO 1VIDEO 2

S-VIDEO

VIDEO

L/MONO

AUDIO

OUT to TV

CH 3 CH 4

Note:

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have an S-VHS VCR, use an S-video cable instead of a standard video cable.

Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time or the picture performance will be unacceptable.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

your TV

Setting up

Features

Using the TV’s

Appendix

Index

Reference

Connecting a cable converter box

This connection allows you to watch basic and premium cable channels. To use the TV features (such as PIP swap, channel channel block, favorite channels, or channel labels ), select ANT-1. To view premium channels, select ANT-2, tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels.

You will need:

your TV

Connecting

y z,

• three coaxial cables (one or more may be provided by your cable company)

From Cable

ANT (75Ω)

  

OUT















DVD IN

  

















  





Cable

Converter

Box

Note:

When you use a converter box with your TV, the remote control may not operate certain features, such as PIP swap, channel y z, channel block, favorite channels, or channel labels.

Connecting a cable converter box and VCR

This connection allows you to watch and record basic and premium cable channels, as well as watch videotapes. Set the TV signal source to Video1 (see “Selecting the signal source” on page 17). Tune the VCR to channel 3 or 4 (the same channel as the converter box output switch), and use the cable converter box to change channels. Set the PIP source to “TV” (see page 28).

You will need:

• five coaxial cables (one or more may be provided by your cable company)

• one pair of audio cables (one single audio cable for a mono VCR)

• one video cable

• one cable splitter

From Cable

Cable Signal Splitter

Cable Converter Box

Stereo VCR

ANT (75Ω)

ANT-1 OUT ANT-2

OUT

VIDEO

L/MONO

AUDIO

VIDEO AUDIO

DVD IN

COLOR STREAM

INPUT

AUDIO

OUT

IN from ANT

VIDEO 1VIDEO 2

S-VIDEO

VIDEO

L/MONO

AUDIO

OUT to TV

CH 3 CH 4

OUT

Note:

When you use a converter box with your TV, the remote control may not operate certain features, such as PIP swap, channel y z, channel block, favorite channels, or channel labels.

If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable.

If you have an S-VHS VCR, use an S-video cable instead of a standard video cable.

Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time or the picture performance will be unacceptable.

Reference

Connecting a DVD player or satellite receiver and a VCR

This connection allows you to watch DVD/satellite, VCR, or TV programs. You can record satellite or TV programs. You can also record one TV channel while watching another channel.

Note: If your DVD player has component video connections, follow the connection instructions under “Connecting a DVD player with ColorStream

(component video) and a VCR” on page 10.

Toshiba

Welcome to

You will need:

• two (or three, if satellite receiver is used) coaxial cables (one or

more may be provided by your cable or satellite company)

• three pairs of audio cables (one pair and two single audio cables

for a mono VCR)

• two standard video cables

• one S-video cable

DVD Player / Satellite Receiver

AUDIO

OUT

VIDEO

OUT

VIDEO

L/MONO

AUDIO

Stereo VCR

OUT

To Satellite

ANT (75Ω)

ANT-1 OUT ANT-2

OUT

VIDEO AUDIO

DVD IN

COLOR STREAM INPUT

AUDIO

VIDEO 1VIDEO 2

S VIDEO

S-VIDEO

VIDEO

L/MONO

AUDIO

OUT to TV

CH 3 CH 4

To Antenna

Satellite IN

IN from ANT

Note:

You can use a standard video cable instead of an S-video cable between the TV and DVD player/satellite receiver, but the picture quality will decrease.

The illustration at left shows one S-video cable and one pair of standard audio cables connected from the DVD player/satellite receiver to Video-1 on the TV.

Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time or the picture performance will be unacceptable.

When recording, set Audio Out to FIX (see “Selecting variable audio OUT” on page 35). With Audio Out set to FIX, the TV’s volume setting during recording will not affect the sound level being recorded.

your TV

Connecting

Using the

Remote Control

your TV

Setting up

Features

Using the TV’s

Appendix

Index

Reference

Connecting a DVD player with ColorStream a VCR

This connection allows you to watch DVD, VCR, or TV programs, and record TV programs.

Your TV has ColorStream (component video) connections. Connecting your TV to a component video compatible DVD player (such as a Toshiba DVD

your TV

Connecting

player with ColorStream quality and performance.

You will need:

Note:

For the best picture performance, use ColorStream (component video) cables between the TV and DVD player.

(component video) and

) can greatly enhance picture

• two coaxial cables (one or more may be provided by your cable company)

• three pairs of audio cables (one pair and two single audio cables for a mono VCR)

• two standard video cables

• one set of ColorStream (component) video cables

DVD Player with ColorStream® (component video)

AUDIO

OUT

VIDEO

OUT

Stereo VCR

LRL

ANT-1 OUT ANT-2

OUT

VIDEO

L/MONO

AUDIO

VIDEO AUDIO

YPb Pr

ANT (75Ω)

AUDIO

ColorStream

(Component Video)

DVD IN

COLOR STREAM

INPUT

OUT

S VIDEO

S-VIDEO

VIDEO

L/MONO

AUDIO

VIDEO 1VIDEO 2

IN from ANT OUT to TV

CH 3 CH 4

To Antenna

Reference

Connecting two VCRs

This connection allows you to record from one VCR to another VCR while watching a video program. You can also record from one TV channel while watching another channel.

You will need:

• two coaxial cables (one or more may be provided by your cable company)

• two pairs of audio cables (two single audio cables for mono VCRs)

• two video cables

Stereo VCR [Playback]

Stereo VCR [Recording]

VIDEO AUDIO

ANT-1 OUT ANT-2

OUT

VIDEO

L/MONO

AUDIO

VIDEO AUDIO

ANT (75Ω)

AUDIO

DVD IN

COLOR STREAM

INPUT

OUT

IN from ANT

VIDEO 1VIDEO 2

IN from ANT

OUT to TV

CH 3 CH 4

S-VIDEO

VIDEO

L/MONO

AUDIO

OUT to TV

CH 3 CH 4

To Antenna

Note:

If you have S-VHS VCRs, use S-video cables instead of standard video cables.

Do not connect a standard video cable and an S-video cable to Video-1 (or Video-2) at the same time or the picture performance will be unacceptable.

Do not connect the same VCR to the output and input jacks on the TV at the same time.

Connecting a camcorder

This connection allows you to watch videos recorded on a camcorder.

You will need:

• one pair of audio cables

• one video cable

Note:

If your camcorder has an S-video connection, an S-video cable will provide better picture performance than a standard video cable.

Do not connect a regular video cable and an S-video cable to Video-1 (or Video-2) at the same time or the picture performance will be unacceptable.

Toshiba

Welcome to

S-VHS Camcorder

TV Back

ANT (75Ω)

ANT-1 OUT ANT-2

OUT

VIDEO

L/MONO

AUDIO

DVD IN

COLOR STREAM INPUT

S-VIDEO

AUDIOVIDEO

OUT

S-VIDEO

VIDEO

L/MONO

AUDIO

VIDEO 1VIDEO 2

Camcorder

TV Front

Connecting an audio amplifier

This connection allows you to use an audio amplifier to adjust the audio level. This connection also allows you to use external speakers.

You will need:

• one coaxial cable (may be provided by your cable company)

• one pair of audio cables

To Cable, Cable Box,

Audio Amplifier

or Antenna

ANT (75Ω)









AUDIOVIDEO

OUT

VIDEO L/MONO R

AUDIO

VIDEO-3 IN

Note:

To control the audio, both the TV and the amplifier must be turned on, and the volume of both must be set above 0, or you will not hear any sound. See “Selecting variable audio OUT” on page 35 for additional details.

your TV

Connecting

Using the

Remote Control

your TV

Setting up

Features

Using the TV’s

  

OUT DVD IN









  





















  

Appendix

Index

Reference

Using the

Remote Control

Using the remote control

Preparing the remote control for use

The remote control will operate your TV, most VCR models, and most cable TV converters together, even if they are different brands.

•If you will be using your TV with a Toshiba VCR or cable TV converter, your remote control is already programmed and ready to use. See “Using the remote control with a VCR or cable TV converter” below.

•If you own a non-Toshiba VCR or converter and want to use your TV remote control to operate it, you will need to program the remote control. See “Programming the remote control for use with a non-Toshiba VCR or cable TV converter” on page 13.

Installing the remote control batteries

To install the batteries:

1. Slide the battery cover off the back of the remote control.

Note:

The remote control provided with your TV may or may not operate certain features on your VCR, cable TV converter, or other electronic equipment. Refer to the owner’s manuals provided with your other equipment to see which features are available. In addition, the other remote controls may have buttons not available on your TV’s remote control. If you would like to use those features or buttons, you may need to use the original remote controls provided with your other equipment.

Caution:

• Dispose of batteries in a designated disposal area. Do not throw batteries into a fire.

• Do not mix battery types or combine used batteries with new ones.

• Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.

• If you do not intend to use the remote control for a long time, remove the batteries.

2. Install two “AA” size batteries. Match the + and – symbols on the batteries to the symbols on the battery compartment.

3. Slide the battery cover back onto the remote control until the lock snaps.

Using the remote control with a VCR or cable TV converter

To control a VCR:

Set the TV/CABLE/VCR switch to the VCR position. The shaded buttons in the illustration at right will then control the VCR. The unshaded buttons will operate the TV as usual.

To control a cable TV converter:

Set the TV/CABLE/VCR switch to the CABLE position. The shaded buttons in the top portion of the illustration at right will then control the cable TV converter.

CABLE

VCR

42536

100

C.CAPT

FAV

RESET

STOP SOURCE

REC

TV/VCR REW FF

RECALL

CH RTN

ADV/

PIP CH

ENTER

ADV/

PIP CH

CT-9946

ENT

PLAY PIP

POWER

VOL

EXIT

LIGHT

MUTE TV/VIDEO TIMER

STILL LOCATE SWAP

RECALL

POWER

TV/CABLE/VCR switch

CH (Channel)

Channel Numbers

ENT (used for the “ENTER” command with some VCRs and cable TV converters)

FAV

STOP

PLAY

FAST FORWARD REWIND

TV/VCR RECORD

CH RTN

ADV/

PIP CH

LIGHT

MUTE TV/VIDEO TIMER

RECALL

POWER

CABLE

VCR

ENT

C.CAPT

42536

100

Channel Numbers

TV/CABLE/VCR switch

ENT (used for the “ENTER” command with some VCRs and cable TV converters)

POWER

CH (Channel)

VOL

RECALL

Programming the remote control for use with a non-Toshiba VCR or cable TV converter

The remote control provided with your Toshiba TV is preprogrammed to operate Toshiba VCRs and cable TV converters.

To operate a non-Toshiba VCR or converter using the remote control provided with your TV:

1. Refer to the VCR and cable TV converter code tables (below and on the next page) to find the corresponding code for your VCR or converter brand.

If more than one code is listed, try each one separately until you find the one that works.

2. If you are programming the remote control to operate your:

• VCR: Set the TV/CABLE/VCR switch on the remote control

to “VCR.”

• Cable TV converter: Set the TV/CABLE/VCR switch on the

remote control to “CABLE.”

3. While holding down RECALL, press the CHANNEL NUMBERS to enter the three-digit code for your VCR or cable TV converter brand.

4. Point the remote control at the VCR or converter, and press POWER to test the code.

•If the VCR or converter responds, you entered the correct

code.

•If the VCR or converter does not respond, repeat steps 1–4

using another code.

5. Set the TV/CABLE/VCR switch to “TV” to control the TV.

For future reference, write down the codes you used:

VCR code: _____________________

Cable TV converter code: _____________________

Note:

• Every time you replace the batteries, you must reprogram the remote control.

• Some newer VCRs are capable of working on either of two remote codes. These VCRs have a switch labeled “VCR1/ VCR2.” If your VCR has this kind of switch and does not respond to any of the codes for your VCR brand, set the switch to the other position (VCR1 or VCR2) and reprogram the remote control.

Toshiba

Welcome to

your TV

Connecting

Using the

Remote Control

your TV

Setting up

VCR code table

Brand Code

Adventura 019 Aiko 297 Aiwa 019 Akai 060, 068, 080, 125,

261 American High 054 Asha 259 Audiovox 056 Beaumark 259 Bell & Howell 123 Brandt 206 Broksonic 140, 203, 230, 314,

380 Calix 056 Canon 054 Capehart 039 Carver 100

CCE 091, 297 Citizen 056, 297 Colt 091 Craig 056, 066, 091, 259 Curtis Mathes 054, 060, 079 Cybernex 259 Daewoo 039, 064, 297 Daytron 039 Dynatech 019 Electrohome 056 Electrophonic 056 Emerex 051 Emerson 019, 021, 056, 062,

080, 087, 140, 203, 227, 228, 230, 231, 297, 313, 314, 380, 498

Fisher 066, 073, 085, 123 Fuji 052, 054 Funai 019, 344 Garrard 019, 344 GE 054, 079, 084, 221 Go Video 251, 298 Goldstar 037, 056, 057 Gradiente 019 Harley Davidson 019 Harman/Kardon 057, 094 Harwood 087, 091 Headquarter 065 HI-Q 066 Hitachi 060, 061, 084, 124,

185, 254 Jensen 060 JVC 027, 060, 086 Kenwood 057, 060, 086

Features

Using the TV’s

Appendix

Index

Reference

+ 29 hidden pages