ON-LINE MANUAL
32W143*DG
LED Backlight LCD TV
During the life of your TV rmware updates will be made available
to ensure that your TV maintains optimum performance. You can
download the latest version of rmware from
www.toshiba-om.net/rmware.php
Some features listed in this document are limited due to local
legislation and may not be available in all countries.
“Register your TV online at: www.toshiba-europe.com/registration”
English - 1 -
English
Contents
Safety Precautions ................................................. 3
Air Circulation ..................................................... 3
Heat Damage...................................................... 3
Mains Supply ...................................................... 3
Warning ............................................................. 3
Do ....................................................................... 3
Do not ................................................................. 3
Installation and Important Information .................... 4
Exclusion Clause ................................................ 4
Important safety information .................................. 5
Removing the pedestal stand ................................. 6
The Remote Control .............................................. 7
Simple at-a-glance reference of your remote
control. .................................................................... 7
Inserting Batteries and Effective Range of the
Remote Control................................................... 7
Connecting External Equipment ............................. 8
Connecting an HDMI® or DVI Device to the HDMI
Input........................................................................ 9
To Connect an HDMI Device .............................. 9
To Connect a DVI Device.................................... 9
Connecting a Computer........................................ 10
To Connect a Computer .................................... 10
Connecting a USB Memory .................................. 10
To Connect a USB Flash Drive ......................... 10
Power Save Mode .................................................11
Environmental Information ................................11
Controlling the TV ................................................. 12
Switching on ..................................................... 12
Using the Remote Control ................................ 12
Using the Controls on the TV ............................ 12
Initial Installation .................................................. 13
Auto Tuning .......................................................... 15
Auto Tuning....................................................... 15
Auto Channel Scan Menu Operation ................ 15
Manual Tuning, Analogue Fine Tuning ................. 16
Digital Aerial Manual Search............................. 16
Digital Cable Manual Search ............................ 16
Analogue Manual Search ................................. 16
Analogue Fine Tune.......................................... 16
Clear Service List (*) ......................................... 16
General Operation ................................................ 17
Stereo and Bilingual Transmissions.................. 17
Displaying Subtitles .......................................... 17
Viewing Main Menu .......................................... 17
Controlling Volume and Muting Sound ............. 17
Selecting Programme Positions........................ 17
Standby Notications ........................................ 17
Channel List, Sorting Programmes, Programme
Locking ................................................................. 18
Viewing Channel List ........................................ 18
Moving a Channel ............................................. 18
Deleting a Channel ........................................... 18
Renaming a Channel ........................................ 18
Locking a Channel ............................................ 18
Viewing Info Banner, Electronic Programme
Guide .................................................................... 19
Viewing Info Banner .......................................... 19
Electronic Programme Guide............................ 19
Language Selection .............................................. 20
Language Settings ............................................ 20
Digital Settings - Parental Control, Menu Lock, Set
PIN........................................................................ 21
Viewing Parental Control Menu ........................ 21
Menu Lock ........................................................ 21
Maturity Lock (*)................................................ 21
Child Lock ......................................................... 21
Set PIN ............................................................. 21
Conguring Picture Settings ................................. 22
Conguring Picture Settings ............................. 22
Operating Picture Settings Menu Items ............ 22
Mode ................................................................. 22
Contrast ............................................................ 22
Brightness ......................................................... 22
Sharpness......................................................... 22
Colour ............................................................... 22
Power Save Mode ............................................ 22
Backlight ........................................................... 22
Noise Reduction ............................................... 22
Reset ................................................................ 23
Changing Picture Format...................................... 24
Conguring PC Picture Settings ........................... 25
PC Picture Settings (*) ...................................... 25
PC Picture controls ........................................... 25
PC Position ....................................................... 25
Autoposition ...................................................... 25
H Position ......................................................... 25
V Position.......................................................... 25
Dot Clock .......................................................... 25
Phase................................................................ 25
Conguring Sound Settings .................................. 26
Conguring Sound Settings .............................. 26
Operating Sound Settings Menu Items ............. 26
Volume .............................................................. 26
Equalizer (Only for speaker) ............................. 26
Balance (Only for speaker) ............................... 26
Headphone ....................................................... 26
Sound Mode ..................................................... 26
AVL ................................................................... 26
Digital Out ......................................................... 26
Settings Menu Operation, Conditional Access ..... 27
Conguring Your TV’s Settings ......................... 27
Viewing Settings Menu ..................................... 27
Using a Conditional Access Module ................. 27
Viewing Conditional Access Menu (*) ............... 27
Setting Timers....................................................... 28
Timers ............................................................... 28
Setting Sleep Timer .......................................... 28
Setting Programme Timers ............................... 28
English - 2 -
English
Adding a Timer.................................................. 28
Editing a Timer .................................................. 28
Deleting a Timer................................................ 28
Conguring Date/Time Settings ........................ 29
Source Settings .................................................... 29
Conguring Source Settings ............................. 29
Input Selection .................................................. 29
Conguring Other Settings - General ............... 30
Operation .......................................................... 30
Menu Timeout ................................................... 30
Scan Encrypted Channels ............................... 30
Blue Background .............................................. 30
Software Upgrade ............................................. 30
Application Version ........................................... 30
Hard of Hearing ................................................ 30
Audio Description.............................................. 30
Auto TV Off ....................................................... 31
Standby Search ............................................... 31
Store Mode ....................................................... 31
Power Up Mode ................................................ 31
Using Media Browser ........................................... 32
Manual Start ..................................................... 32
Auto Start .......................................................... 32
Playing MP3 Files ............................................. 33
Viewing JPEG Files .......................................... 33
Slideshow Feature ............................................ 34
Video Playback ................................................. 34
Media Browser Settings .................................... 35
To Close the Media Player ................................ 35
Analogue Only Text Services ................................ 36
Analogue Text Services .................................... 36
Using Text Button -TEXT .................................. 36
Acessing Sub-Pages ........................................ 36
Revealing Concealed Text ................................ 36
Holding a Page ................................................. 36
To display an initial page................................... 36
Appendix A: PC Input Typical Display Modes ....... 37
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types) .............................................. 38
Appendix C: PIN Information ............................... 39
Appendix D: Supported File Formats for USB
Mode..................................................................... 40
Specications and Accessories ............................ 41
License Information .............................................. 42
Q & A Section ....................................................... 43
English - 3 -
English
Safety Precautions
This equipment has been designed and manufactured to meet international safety standards but, like any
electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read
the points below for your own safety. They are of a general nature, intended to help with all electronic consumer
products and some points may not apply to the goods you have just purchased.
Air Circulation
Leave more than 10cm around all edges when wall
mounting the television to allow adequate ventilation.
This will prevent overheating and possible damage to
the television. Dusty places should also be avoided.
Heat Damage
Damage may occur if the television is left in direct
sunlight or near a heater. Avoid places subject to
extremely high temperatures or humidity, or locations
where the temperature is likely to fall below 5°C
(41°F).
Mains Supply
The set should be operated only from a 220-240 V
AC 50 Hz outlet. DO ensure that the television is not
standing on the mains lead. DO NOT cut off the mains
plug from this equipment, this incorporates a special
Radio Interference Filter, the removal of which will
impair its performance. It should only be replaced by
a correctly rated and approved type. IF IN DOUBT
PLEASE CONSULT A COMPETENT ELECTRICIAN.
Warning
To prevent the spread of re, keep candles or other
open ames away from this product at all times.
Do
DO read these operating instructions before you
attempt to use the equipment.
DO ensure that all electrical connections (including
the mains plug, extension leads and inter connections
between pieces of equipment) are properly made and
in accordance with the manufacturers’ instructions.
Switch off and withdraw the mains plug before making
or changing connections.
DO consult your dealer if you are ever in doubt about
the installation, operation or safety of your equipment.
DO be careful with any glass panels or doors on
equipment.
Do not
DON’T remove any xed cover as this may expose
dangerous voltages.
DON’T obstruct the ventilation openings of the
equipment with items such as newspapers, tablecloths,
curtains, etc. Overheating will cause damage and
shorten the life of the equipment.
DON’T allow electrical equipment to be exposed to
dripping or splashing or objects lled with liquids, such
as vases, to be placed on the equipment.
DON’T place hot objects or naked ame sources,
such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and
lead to res.
DON’T use makeshift stands and NEVER x with
wood screws. Use the stand manufacturers supplied
screws.
DON’T leave equipment switched on when it is
unattended, unless it is specically stated that it is
designed for unattended operation or has a standby
mode. Switch off by withdrawing the plug, make sure
your family know how to do this. Special arrangements
may need to be made for people with disabilities.
DON’T continue to operate the equipment if you are in
any doubt about it working normally, or it is damaged
in any way - switch off, withdraw the mains plug and
consult your dealer.
WARNING - excessive sound pressure from
earphones or headphones can cause hearing loss.
ABOVE ALL - NEVER let anyone, especially
children, push or hit the screen, push anything
into holes, slots or any other openings in the case.
NEVER guess or take chances with electrical
equipment of any kind - it is better to be safe
than sorry.
THE MAINS PLUG IS USED AS A DISCONNECTING
DEVICE AND THEREFORE SHOULD BE READILY
OPERABLE.
Note : Interactive video games that involve shooting
a “gun” type of joystick at the on-screen target may
not work with this TV.
English - 4 -
English
Locate the television away from direct sunlight and
strong lights. Soft, indirect lighting is recommended
for comfortable viewing. Use curtains or blinds to
prevent direct sunlight falling on the screen.
Place the TV on a stable, level surface that can
support the weight of the TV. In order to maintain
stability and prevent it falling over, It is recomended
to secure the TV to a wall using a sturdy tie on the
back of the stand.
Exclusion Clause
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) re;
ii) earthquake;
iii) accidental damage;
iv) intentional misuse of the product;
v) use of the product in improper conditions;
vi) loss and/or damage caused to the product whilst in the possession of a third party;
vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set
out in the owner’s manual;
viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used
simultaneously with associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage
including but not limited to the following, loss of prot, interruption of business, the loss of recorded data
whether caused during normal operation or misuse of the product.
Installation and Important Information
Where to install
Avoid using chemicals (such as air refreshers,
cleaning agents, etc.) on or near the TV
pedestal. Failure to follow these instructions
could result in serious injury and/or permanent
damage to TV and TV pedestal.
Cleaning the screen and cabinet…
Turn off the power, and clean the screen and cabinet
with a soft, dry cloth. We recommend that you do not
use any proprietary polishes or solvents on the screen
or cabinet as this may cause damage.
* Button and stand style
is dependent on model.
English - 5 -
English
Important safety information
• Any function related to the digital television (with the DVB logo) is available only within the country or area
where such signals are transmitted. Verify with the salesperson if it is possible to receive a DVB - T/C signal
in the area where you live.
• Even if the television conforms to the required DVB - T/C specications, the compatibility with future digital
DVB - T/C transmissions is not guaranteed.
• Some digital television functions may not be available in certain countries.
• The DVB - T/C system present in this device, allows reception of both FTA (Free To Air) and Encrypted
channels.
Note; Encrypted channels require a specic encryption system to view, which may not be available in certain
countries.
• DVB T is Digital Video Broadcast via an Aerial or antenna system.
• DVB C is Digital Video Broadcast via a Cable system.
IMPORTANT INFORMATION FOR TV INSTALLATION
• Do not stand the televisions on cloth or other materials placed between the television and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television or its controls.
• Use a soft, dry cloth to clean the unit.
• Set up unit so that no one will trip over the ex.
• If you intend to wall mount the unit, contact the shop where you purchased the unit for advice.
• To protect the unit during a thunder storm, unplug the AC power cord and disconnect the aerial, cable and
satellite decoder/systems etc.
Caution: Do not touch the aerial connector.
The ventilation holes should not be covered or blocked. Do not set up near radiators. Do not place in direct
sunshine.
• Never use the unit when moisture condensation could occur and if it exists on the unit allow time for the
moisture to be evaporated.
English - 6 -
English
Removing the pedestal stand
When using a Wall Bracket
Please use a wall bracket appropriate for the size and weight of the LCD TV.
• Two people are required for installation.
• To install a wall-mount.
(1) Unplug and remove any cables and/or other component connectors from the rear of the TV.
(2) Carefully lay the front of the unit face down on a at, cushioned surface such as a quilt or blanket.
(3) Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate
bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the
wall bracket.
(4) Always use the screws supplied or recommended by the wall mount manufacturer.
Removing the pedestal stand
(1) Carefully lay the front of the unit face down on a at, cushioned surface with the stand hanging over the edge.
(2) Remove the screws.
(3) After the screws are removed, hold the pedestal stand in place,then remove the pedestal stand and the
plastic moulding from the TV by removing away from the TV.
NOTE: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD
panel.
For 32W143*DG models
English - 7 -
English
The Remote Control
Simple at-a-glance reference of your remote control.
Inserting Batteries and Effective Range of the Remote Control
Remove the back cover to reveal the battery compartment and make sure the
batteries are inserted the right way round. Suitable battery types for this remote
are AAA, IEC R03 1.5V.
Do not combine a used, old battery with a new one or mix battery types. Remove
exhausted batteries immediately to prevent acid from leaking into the battery
compartment. Dispose of them in a designated disposal area.
Warning: Batteries must not be exposed to excessive heat such as sunshine,
re or the like.
The performance of the remote control will deteriorate beyond a distance of ve
metres or outside an angle of 30 degrees from the IR receiver. If the operating
range becomes reduced the batteries may need replacing.
SLEEP
SCREEN
PRESETS
LANG.
FAV
EPG
SWAP
SOURCE
C
DISP.
SEARCH
MODE
INFO
CH
V
1. Standby
2. Image size
3. Sleep Timer
4. Mono/Stereo - Dual I-II / Current
Language (in DVB channels)
5. No function
6. Numeric buttons
7. Electronic programme guide(in
DVB channels)
8. No function
9. Media Browser
10. Navigation buttons
(Up/Down/Left/Right)
11. No function
12. No function
13. Programme Down /
Page up -
Programme Up / Page down
14. Mute
15. No function
16. Pause
17. Rapid reverse
18. Play
19. Red button
20. Green button
21. Picture mode selection
22. No function
23. Teletext / Mix (in TXT mode)
24. Subtitle on-off (in DVB channels)
25. Previous programme
26. AV / Source selection
27. Menu on-off
28. Okay (Conrm) / Hold (in TXT
mode) / Channel List
29. Exit / Return / Index page (in TXT
mode)
30. No function
31. Info / Reveal (in TXT mode)
32. Volume Up / Down
33. No function
34. No function
35. Rapid advance
36. Stop
37. Blue button
38. Yellow button
English - 8 -
English
Connecting External Equipment
Before connecting any external equipment, remove the mains plug from the wall socket.
Before running rst time installation, any connected devices need to be set to standby mode.
HDMI® (High-Denition Multimedia Interface) is for using with a DVD decoder or other equipment with
digital audio and video output. It is designed for best performance with 1080i and 1080p high-denition video
signals but will also accept and display VGA, 480i, 480p, 576i, 576p and 720p signals. PC format signals will
also be displayed.
NOTE: Although this TV is able to connect to HDMI equipment, it is possible that some equipment may not
operate correctly.
When connecting a device via the Side AV input, you must use the supplied connection cable to enable
connection.
When connecting a device via YPbPr input, you must use the supplied connection cable to enable connection.
If the TV automatically switches over to monitor external equipment, return to normal TV by pressing the
desired programme position button. To recall external equipment, press SOURCE button repeatedly to switch
between sources.
(*) Number of these inputs may change according to the model of your TV.
English - 9 -
English
Connecting an HDMI® or DVI Device to the HDMI Input
The HDMI input on your TV receives digital audio and
uncompressed digital video from an HDMI source
device or uncompressed digital video from a DVI
(Digital Visual Interface) source device such as a
set-top box or DVD player with HDMI or DVI output.
NOTE: Supported Audio format: Linear PCM,
sampling rate 32/44.1/48kHz.
To Connect an HDMI Device
Connect an HDMI cable (type A connector) to
the HDMI terminal. For proper operation, it is
recommended that you use an HDMI cable with the
HDMI Logo ( ).
• If your HDMI connection is capable of 1080p and/or
your TV is capable of refresh rates greater
than 50Hz, you will need a Category 2 cable.
Conventional HDMI/DVI cable may not work properly
with this mode.
• HDMI cable transfers both video and audio. Separate
analogue audio cables are not required (see
illustration).
• To view the HDMI device video press SOURCE
button to select the appropriate HDMI input.
To Connect a DVI Device
Connect an HDMI-to-DVI cable (HDMI type A
connector) to the HDMI input socket and the seperate
audio cables.
• The maximum recommended HDMI-to-DVI cable
length is 6.6 ft (2m).
NOTE:To ensure that the HDMI or DVI device is reset
properly, it is recommended that you follow these
procedures:
• When turning on your electronic components, turn
on the TV rst, and then the HDMI or DVI device.
* Number of
these inputs
may change
according to
the model of
your TV.
* Number of
these inputs
may change
according to
the model of
your TV.
English - 10 -
English
To Connect a Computer
With either an RGB/PC or an HDMI connection, you
can watch your computer’s display on the TV and hear
the sound from the TV’s speakers.
To use a PC, set the monitor output resolution on
the PC before connecting it to the TV. To display the
optimum picture, use the PC setting feature.
NOTE: Some PC models cannot be connected to
this TV. An adaptor is not needed for computers with
a compatible mini D-sub15-pin terminal.
Connecting a Computer Connecting a USB Memory
To Connect a USB Flash Drive
• You can connect a USB Flash Drive to your TV by
using the USB input of the TV. This feature allows
you to display/play music, photo or video les stored
in a USB stick.
• It is possible that certain types of USB devices (e.g.
MP3 Players) may not be compatible with this TV.
• You may back up your les before making any
connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any le damage or data loss.
• Do not pull out USB module while playing a le.
CAUTION: Quickly plugging and unplugging USB
devices may cause damage to the USB device.
English - 11 -
English
Environmental Information
This television is designed to be environment friendly. You not only help to save the environment but also
you can save money by reducing electricity bills thanks to the energy efciency feauture of this TV. To reduce
energy consumption, you should take the following steps:
You can use Power Save Mode setting, located in the Picture Settings menu. If you set Power Save Mode as
Eco, the TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum
level. Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode.
If pressed Right button, “Screen will be off in 15 seconds.” message will be displayed on the screen. Select
Proceed and press OK to turn the screen off immediately. If you don’t press any button, the screen will be off
in 15 seconds. Press any button on the remote or on the TV to turn the screen on again. If you disable Power
Save Mode, picture mode will be automatically set to Dynamic.
It is highly recommended to activate Power Save Mode to reduce your annual power consumption. And also
it is recommended to disconnect the TV from the mains plug to save more energy when you are not going to
use it for a long period of time.
Repair Information
Please refer all servicing to qualied personnel. Only qualied personnel must repair the TV. Please contact
your local dealer, where you have purchased this TV for further information.
Power Save Mode
English - 12 -
English
Controlling the TV
A wide variety of external equipment can be connected via the sockets located on the side and back of the
TV. Whilst all the necessary adjustments and controls for the TV are made using the remote control, the
buttons on the Back of the TV may be used for some functions.
Switching on
If the standby LED is unlit, check that the mains plug
is connected to the power and press the / I button
on the back side of the television or button on the
remote control to switch the television on.
To put the television into Standby, press button on
the remote control or on the TV. To view the television,
press button again. The picture may take a few
seconds to appear.
Note: The active Standby LED colour will turn to red in a few
moments when the TV is switched into Standby.
For energy saving:
Turning the TV off at its mains supply, or un-plugging
it, will cut energy use to nearly zero for all TV’s. This
is recommended when the TV is not being used for a
long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce
energy use. Energy efciency cuts energy consumption
and thus saves money.
NOTE: Putting the TV into standby mode, will reduce energy
consumption, but will still draw some power.
Using the Remote Control
Press the MENU button on the remote control to see
the menus.
The main menu appears as a group of icons each
for a menu option. Press the Left or Right button to
select a topic.
In sub menu screen mode the menu appears as a
list. Press the Up or Down button to select a topic.
To use the options press the Up and Down buttons on
the remote control to move up and down through them
and OK, Left or Right buttons to select the required
choice. Follow the on screen instructions.
Using the Controls on the TV
Using the control buttons on the Back of the TV:
• To alter the volume press + or - .
• To alter the programme position press
P
on
the Back of the TV.
• Press + - buttons at the same to view main
menu and use
P
to navigate and + - to
change value.
To select an external input, press SOURCE until the
appropriate input source is selected.
Please always refer to the owner’s manual of the
equipment to be connected for full details..
English - 13 -
English
Initial Installation
Before switching on the TV, put your decoder and media recorder to Standby if they are connected and
ensure the aerial is connected to your TV. To set up the TV, use the buttons on the remote control as
detailed on page 7.
IMPORTANT: Ensure that the aerial is connected and
a Common Interface module is not inserted before
switching on the TV for the rst time installation.
1. Connect the mains plug and switch the TV to on
using the / I button. If the TV does not switch on,
press any numbered or button on the remote
control, then the language selection menu will
be displayed. This screen will appear the rst
time that the TV is switched on and each time
the TV is reset.
2. By pressing Up or Down button, highlight the
language you want to set and press OK button.
The following message will be displayed next:
3. By pressing Left or Right button, select the
country you want to set and press Down button
to highlight the Search Type option. Use Left or
Right to set the desired search type. Available
search types are digital only, analog TV only
and full.
4. When set, press Down button to highlight
Teletext Language. Use Left or Right button to
select desired language region. Highlight Scan
Encryted Channels and enable/disable this
option by using Left or Right buttons. Press OK
to continue.
Note: Depending on the Country selection you may
be asked to set and conrm a PIN at this point. The
selected PIN cannot be 0000. You have to enter it if
you are asked to enter a PIN for any menu operation
later.
5. The following message will be displayed next on
the screen:
Select Store mode if the TV will be placed in a
store to exhibit. This option will congure your
TV’s settings for best display quality and the
supported features of the TV will be displayed
on the top of the screen as a info banner.
If Store mode is selected, a confirmation
screen will be displayed. Select YES to
proceed. For home use select Home Mode.
This option will be available in Other Settings
menu and can be turned off/on later..
6. Press OK button on the remote control to continue
and the following message will be displayed on
the screen:
7. Select Yes button by using Left or Right button
and press OK button to continue. Afterwards, the
following OSD will be displayed on the screen:
8. If you select Cable option, a conrmation screen
will be displayed. If you want to search for
available networks, select YES to proceed. The
following screen will be displayed:
English - 14 -
English
You can select Network, Frequency, Network
ID and Search Step from this screen. For
highlighting lines you see, use Up or Down button.
You can set Search Step as 8000 kHz or 1000
kHz. If you select 1000 kHz, the TV will perform
search process in a detailed way. Searching
duration will thus increase accordingly. When
finished, press OK button to start automatic
search.
If you select NO, the following screen will be
displayed:
You can set Start - Stop Frequencies and Search
Step as desired. When nished, press OK button
to start the search.
9. If you select Aerial option from the Search Type
screen, the television will search for broadcasts.
10. The Auto tuning screen will appear and the
television will start to search for available stations.
The progress bar will move along the line. You
must allow the television to complete the search.
Initial Installation - continued
Note: You can press MENU button to cancel.
While the search continues a message will appear,
asking whether you want to sort channels according
to the LCN(*). Select Yes and press OK to conrm.
(*) LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel sequence (if available).
After the available stations are stored, Edit Channel
List will be displayed on the screen.
• Press OK button to quit channel list and watch TV.
Note:
Do not turn off the TV while initializing rst time
installation.
English - 15 -
English
Auto Tuning
As new services are broadcast, it will be necessary to
retune the television in order to view them.
• It is recommended to run Auto Tuning periodically
to ensure that all new services are added. Please
be aware that Auto Tuning will completely retune
the television and all current channels and settings
will be lost.
• Press MENU button on the remote control and select
Install and Retune by using Left or Right button.
Press OK button and the following menu screen
will be displayed.
• Select Automatic Channel Scan (Retune) by using
Up or Down button and press OK button. Automatic
Channel Scan options will be displayed. You can
select options by using Up or Down and OK buttons.
Auto Channel Scan Menu Operation
Digital Aerial: Searches and stores aerial DVB
stations.
Digital Cable: Searches and stores cable DVB
stations.
Analogue: Searches and stores analogue stations.
Digital Aerial & Analogue: Searches and stores
aerial DVB and analogue stations.
Digital Cable & Analogue: Searches and stores
cable DVB and analogue stations.
• Whenever you select an automatic search type and
press OK button, a conrmation screen will appear
on the screen. To start installation process, select
Yes, to cancel select No by using Left or Right
and OK button.
• After auto channel scan type is set and selected
and conrmed, installation process will start and
progress bar will move along. The television will
search for all available stations. You must allow
the television to complete the search. Press MENU
button to cancel the process. In such a case, located
channels are not stored.
Auto Tuning
English - 16 -
English
Manual Tuning, Analogue Fine Tuning
The television can be tuned-in manually using Manual Search feature.
Digital Aerial Manual Search
The feature is available for service engineers or
can be used for direct channel entry if the multiplex
channel is known.
• Select Manual channel scan from the Install and
Retune menu and press OK.
After selecting search type as Digital Aerial, you
can enter the multiplex or frequency number using
the numeric buttons and press OK button to search.
• Enter the multiplex number using the numeric
buttons. The television will automatically search
for that multiplex. When the multiplex is found any
channels not currently on the programme list will be
added and the programme information at the top of
the screen will be updated.
• Repeat as necessary.
Digital Cable Manual Search
• In cable manual scan, you can enter frequency,
modulation, symbol rate and network channel scan
options. After selecting search type as Digital Cable,
you can set the desired options and press OK button
to search.
Analogue Manual Search
The television can be tuned-in manually. For example:
if the television cannot be connected to a media
recorder/decoder with a SCART lead or to tune-in a
station on another System.
To allocate a programme position on the television
for a decoder and media recorder: turn the decoder
on, insert a pre-recorded lm into the media recorder
and press PLAY, then manually tune.
After selecting search type as Analogue, you can
use Up or Down button to highlight an item and then
press Left or Right button to set an option.
Enter the channel number or frequency using the
numeric buttons. You can then press OK button
to search. When the channel is located, any new
channels that are not on the list will be stored.
Analogue Fine Tune
• Select Analogue Fine Tune from the Install and
Retune menu by using Up or Down and OK
buttons. Analogue ne tune screen will be displayed.
Analogue Fine Tune feature will not be available if
there are no analogue channels stored.
• Use Left or Right button to set Fine Tune. When
nished, press OK button.
Clear Service List (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
• Select Clear Service List from the Install and
Retune menu by using Up or Down and OK buttons.
A conrmation message will be displayed. If you
want to delete all channels, select Yes and press
OK. Use this setting to clear channels stored.
English - 17 -
English
General Operation
Stereo and Bilingual Transmissions
If stereo or dual language broadcasts are transmitted, the
word Stereo or Dual will appear on the screen each time
positions are changed, disappearing after a few seconds. If
the broadcast is not in stereo, the word Mono will appear.
Stereo… Press LANG to select Stereo or Mono.
Bilingual… Bilingual transmissions are rare. If they are
transmitted, the word Dual will be displayed. Choose the
required programme number, and if the word Dual appears,
press LANG to select Dual I, Dual II or Mono.
For DTV broadcasts
To view current language and for changing to an
alternative language (if available), press LANG button.
Available options will be listed.
Displaying Subtitles
In digital broadcasts, this feature will show subtitles
on the screen in the selected language provided they
are being broadcast.
Press SUBTITLE button to turn the subtitles on. Press
SUBTITLE button again to turn the subtitles off.
Viewing Main Menu
Press + or - buttons on the TV at the same
time to view main menu.
Press MENU button on the remote control to view
main menu.
Controlling Volume and Muting Sound
Volume
Press V or V button on the remote control to
adjust the volume.
Sound Mute
Press “ ” button once to turn the sound off and
again to cancel.
Selecting Programme Positions
To select a programme position use the numeric
buttons on the remote control. Programme positions
can also be selected using CH or CH buttons.
Press INFO button to display the on-screen information
i.e. programme position, stereo/mono signal and
picture format.
Standby Notications
If the TV switches off while in No Signal mode, the
following on-screen message will be displayed on the
next switch-on:
When the Auto TV OFF timeout is reached, the
following message will be displayed on the screen.
Select Yes to shut down the TV. Select No to cancel.
The TV will switch off as well, if you do not make a
selection on this screen.
If the TV switches off owing to the auto power down
feature, the following on-screen message will be
displayed on the next switch-on:
English - 18 -
English
Channel List, Sorting Programmes, Programme Locking
You can view stored channels and sort them by using the Channel List feature.
Viewing Channel List
The channel order may be changed to suit your personal
preference.
• Select Channel List from the main menu and press
OK button. The following menu will be displayed:
• Select Edit Channel List to manage all stored
channels. Use Up or Down and OK buttons to select
Edit Channel List.
• Press Up or Down button for selecting a channel.
You can press P or P button to move page up
or page down.
• To watch a specic channel, highlight it by using
Up or Down button. Afterwards press OK button.
• Press BLUE button to view ltering options.
• Press MENU button to exit.
Note: The channels listed are mixed at the channel list.
Channel types can be differentiated by the icons next to them:
DTV (digital tv), HD (HD TV) , ATV (Analogue TV) ,TV (TV),
Radio symbol (Radio), encrypted, lock, and FAV symbols (for
channels in the favourite list). Listed channels can also be
sorted by using the active channel list lter.
Moving a Channel
• Highlight the desired channel by using Up or Down
button.
• Select Move option in the channel list by using Left
or Right button and press OK button.
• Edit Number screen will be displayed. Enter the
desired channel number by using the numeric
buttons on the remote control and press OK. If there
is a previously stored channel on that number, a
warning screen will be displayed. Select Yes if you
want to move the channel and press OK.
• Selected channel is now moved.
Deleting a Channel
You can press GREEN button to tag/untag all
channels; YELLOW button to tag/untag channel.
• Select the channel that you want to delete and select
Delete option by using Left or Right button. Press
OK button to continue.
• A warning screen will appear. Select Yes to delete,
select No to cancel. Press OK button to continue.
Renaming a Channel
• Select the channel that you want to rename and
select Edit Name option by using Left or Right
button. Press OK button to continue.
• Pressing Left or Right button moves to the previous/
next character. Pressing Up or Down button
changes the current character. Pressing the numeric
buttons ‘0...9’ replaces the highlighted character with
the characters printed above the button one by one
as the button is pressed.
• When nished, press OK button to save. Press
MENU or BACK to cancel.
Locking a Channel
You can press GREEN button to tag/untag all
channels; YELLOW button to tag/untag a single
channel.
• Select the channel that you want to lock by using
Up or Down button.
• Select Lock option by using Left or Right button.
Press OK button to continue.
• You will be asked to enter parental control PIN. Enter
the PIN number.
Note: Default PIN can be set to 0000 or 1234. If you have
dened the PIN(is requested depending on the country
selection) during the First Time Installation or changed the
default PIN later from the Set PIN option under the Parental
Settings menu, use the PIN that you have dened.
• Press OK button when the desired channel is
highlighted to lock/unlock the channel. Lock symbol
will be displayed next to the selected channel.
English - 19 -
English
Viewing Info Banner, Electronic Programme Guide
Viewing Info Banner
• Press INFO button. The information screen will
appear giving details of the channel and programme
currently being viewed.
• Whenever you change channel, the TV displays the
broadcast picture along with an information banner at
the bottom of the screen. This will remain on the screen
for a few seconds.
• If the selected channel is locked, you must enter the
correct four numeric code to view the channel. “Enter
PIN” will be displayed on the screen in such a case:
• Enter the 4-digit PIN number to continue.
Note: Default PIN can be set to 0000 or 1234. If you have
dened the PIN(is requested depending on the country
selection) during the First Time Installation or changed the
default PIN later from the Set PIN option under the Parental
Settings menu, use the PIN that you have dened.
Electronic Programme Guide
• Select the on-screen guide by pressing EPG button,
the guide screen will appear highlighting details of
the channel and programme currently being viewed.
This may take a few moments to appear.
• For details of other programmes currently available,
press navigation buttons to scroll up and down or
scroll left/right through the list. As channels are
selected, details of the programme currently being
broadcast will appear.
• Press RED button to view the previous day.
• Press GREEN button to view the next day.
• Press YELLOW button for zooming to a programme.
• Press BLUE button to display ltering options.
• Press SUBTITLE button to sort channels by a genre.
• For information on a highlighted programme, press
INFO button.
• Use numeric buttons for quickly selecting a
broadcast.
• Use the navigation buttons to highlight a programme
and press OK button to display Event Options
menu. The following options are available.
Select Channel: Using this option, you can switch
to the selected channel.
Set Timer on Event / Delete Timer: You can set
a timer for future programmes using this option.
To cancel an already set reminder, highlight that
programme and press the OK button. Then select
Delete Timer option. The timer will be cancelled.
Note: It is not possible to set timer for two or more individual
events at the same time interval.
• Press TXT button to display searching options.
• Press SWAP button for displaying current
programmes.
English - 20 -
English
Language Selection
Language Settings
Using this menu you can adjust the preferred language
settings.
• Press MENU button and select Settings by using
Left or Right button.
• Select Language and press OK to view this menu.
Select the desired language by using Left or Right
button. Press the MENU button on the remote
control to exit.
Preferred
These settings will be used if available. Otherwise the
current settings will be used.
Audio: By pressing Left or Right button change the
audio language.
Subtitle: Alter the subtitle language with Left or Right
button. The chosen language will be seen in subtitles.
Teletext: Changes the preferred teletext language.
Guide: By pressing Left or Right button change the
guide language.
Current
Audio: If audio language is supported, change the
audio language by pressing Left or Right button.
Subtitle: If subtitle is backed up, alter the subtitle
language with Left or Right button. The chosen
language will be seen in subtitles.
English - 21 -
English
Digital Settings - Parental Control, Menu Lock, Set PIN
You can view or set parental preferences of your TV.
Viewing Parental Control Menu
Press MENU button and select the Settings by using
Left or Right button. Press OK button to view Settings
menu. Use Up or Down button to highlight Parental
and press OK to continue:
• A dialogue box asking for the lock key will be
displayed.
• If it is incorrect, “Wrong PIN” OSD will be displayed.
If it is correct, the Parental Control menu will be
displayed:
Note: Default PIN can be set to 0000 or 1234. If you
have dened the PIN(is requested depending on the
country selection) during the First Time Installation
use the PIN that you have dened.
Menu Lock
In Menu lock you can set locking for All menus, or the
Installation menu to restrict access to these menus.
If the menu lock is disabled, there will be free access
to the menu system.
• Use Up or Down buttons to go to Menu Lock
option. Use Left or Right buttons to choose Menu
Lock Mode.
OFF: All menus are unlocked.
ALL MENUS: All Menus are accessible only with
the correct lock key. So the user cannot add, delete,
rename, channels or set timers.
INSTALLATION MENU: Installation menu is locked.
So the user can’t add channels.
Maturity Lock (*)
When set, this option gets the maturity information
from the broadcast and if this maturity level is disabled,
disables access to the broadcast.
(*) Not available for UK.
Child Lock
Child Lock disables the buttons on the television. All
buttons on the remote control can still be used.
Set PIN
• Use Up or Down buttons to select Set PIN option.
Press OK to display the Set PIN window.
• Use numeric buttons to enter new pin number. You
will need to input your new pin a second time for
verication purposes.
• After typing correct PIN numbers, PIN number will
be changed.
Note: If you change the pin number make sure you
write it down and keep it safe.
English - 22 -
English
Conguring Picture Settings
You can congure picture settings of your TV by using Picture Settings menu.
Conguring Picture Settings
You can use different picture settings in detail. You
can customize current picture mode settings as
desired. For example, you can change items such as,
Brightness, Contrast, Colour and Sharpness.
Press MENU button and select Picture by using Left
or Right button. Press OK button to view Picture
Settings menu.
Operating Picture Settings Menu Items
• Press Up or Down button to highlight a menu item.
• Use Left or Right button to set an item.
• Press MENU button to exit.
Mode
This TV offers the choice of personalising the picture
style. Natural, Cinema, Game and Dynamic are preset
options and affect settings within the TV. Press Left or
Right button to select the picture mode you prefer.
Note: Some options may be inactive depending on the selected
mode.
Contrast
Sets the lightness and darkness values of the screen.
Press Left or Right button to adjust the contrast.
Brightness
Sets the brightness value for the screen. Press Left
or Right button to adjust the brightness.
Sharpness
Sets the sharpness value for the objects displayed
on the screen. Press Left or Right button to adjust
the sharpness.
Colour
Sets the colour value, adjusting the colours. Press
Left or Right button to adjust the colour.
Power Save Mode
Enables or disables the power save mode. Press
Left or Right button to set as Disabled, Eco or to
turn the screen off. See the section Environmental
Information in this manual for further information on
Power Save Mode.
Note: Picture mode will be set to Dynamic automatically
if the Power Save Mode is set to Disabled.
Backlight
This setting controls the backlight level and it can be
set to Auto, Low, Medium and High.
Note: The backlight function will be inactive if Power
Save Mode is set to Eco or picture mode is set to
Game.
Noise Reduction
Sometimes some words or picture elements may
become distorted or pixelated. Using the Noise
Reduction feature reduces this effect by smoothing
out the edges. Press Left or Right button to set noise
reduction level.
Advanced Settings
Some additional controls in the picture menu are
grouped under the title Advanced Settings. To view
or change, rst highlight Advance Settings and press
OK button to view. Advanced Settings menu controls
are as the following:
Dynamic Contrast: You can change contrast rate by
using dynamic contrast function. Dynamic contrast
can be set to one of these options: Low, Medium,
High or Off.
Colour Temp: Colour Temperature increases the
‘warmth’ or ‘coolness’ of the picture by increasing the
red or blue tint. Colour temperature can be set to one
of these options: Normal, Warm or Cool.
Picture Zoom: Sets the picture size to Auto, Full, 16:9,
Subtitle, 14:9, 14:9 Zoom, 4:3 or Cinema. Press Left
or Right button to change the setting.
Film Mode (optional): Films are recorded at a
different number of frames per second to normal
television programmes. Press Left or Right button
to set this feature to Auto or Off. Turn this feature
English - 23 -
English
Conguring Picture Settings - continued
to Auto when you are watching lms to see the fast
motion scenes clearly.
Skin Tone: Adjust the desired skin tone.
Colour Shift: Adjust the desired colour tone.
RGB Gain: Press OK button to edit RGB gain. You
can congure the colour temperature values using
the RGB Gain feature.
HDMI True Black (optional): While watching from
HDMI source, this feature will be visible in the
Advanced Settings menu.
You can use this feature to enhance blackness in the
picture. Set this feature to On to activate.
Note: HDMI True Black On/Off feature functions only
when the HDMI device output is set to RGB.
Reset
This feature allows you to reset the current picture
settings to the default values. Press MENU button and
select Picture by using Left or Right button. Press Up
or Down button to select Reset and press OK button.
Note: The reset function does not reset the settings
for Mode, Noise Reduction, Colour Temp, Picture
Zoom and HDMI True Black.
English - 24 -
English
Changing Picture Format
Press SCREEN button repeatedly to select between Auto(*), Full(**), 16:9, Subtitle, 14:9, 14:9 Zoom, 4:3
or Cinema.
Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for
the purposes of public display or commercial gain may infringe on copyright laws.
You can shift to screen up or down by pressing “ ”/“ ” buttons while picture zoom is selected as 14:9 Zoom,
Cinema or Subtitle.
(*) When Auto is selected, the aspect ratio of the screen is adjusted by the information provided by the selected
source (if available). The format being displayed in Auto mode is completely independent of WSS information
which could be included in the broadcast signal or the signal from an external device.
Note: Auto mode will only be available in SCART, HDMI, YPbPr and DTV.
(**) Full mode is only available on HD channels.
16:9
Use this setting when watching a
widescreen DVD, widescreen video
tape or a 16:9 broadcast (when
available). Due to the range of
widescreen formats (16:9, 14:9 etc.)
black bars may be visible on the top
and bottom of the screen.
4:3
Use this setting to view a true 4:3
broadcast
.
14:9 Zoom
This option zooms to the 14:9 picture.
Subtitle
When subtitles are included on a
letterbox format broadcast, this
setting will raise the picture to ensure
that all the text is displayed.
14:9
This zooms up the wide picture (14:9
aspect ratio) to the upper and lower
limits of the screen
Cinema
This zooms up the wide picture
(16:9 aspect ratio) to the full
screen.
English - 25 -
English
Conguring PC Picture Settings
PC Picture Settings (*)
(*) While in VGA/PC mode, some items in Picture
menu will be unavailable. Instead, VGA mode settings
will be added to the Picture Settings while in VGA/
PC mode.
PC Picture controls
Contrast, Brightness and Colour adjustments in
this menu are identical to adjustments dened in TV
picture menu.
Select Reset and press OK button to reset the
adjustments.
Note:
For switching to VGA/PC source, press SOURCE
button on your remote control and select VGA/PC
input.
Note that VGA/PC mode menu settings are available
only while the TV is in PC source.
PC Position
Select this to display PC position menu items.
Autoposition
If you shift the picture horizontally or vertically to an
unwanted position, use this item to put the picture into
correct place automatically.
Highlight Autoposition and then press the OK button.
H Position
H (Horizontal) Position shifts the image horizontally to
right hand side or left hand side of the screen.
Press Down button until H Position is highlighted.
Press Left or Right button to adjust the value.
V Position
V (Vertical) Position shifts the image vertically towards
the top or bottom of the screen.
Press Down button until V Position is highlighted.
Press Left or Right button to adjust the value.
Dot Clock
Dot Clock adjustment corrects the interference
that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs or
text in smaller fonts.
Press Down button until Dot Clock is highlighted.
Press Left or Right button to adjust the value.
Phase
Depending on the resolution and scan frequency that
you input to the TV Set, you may see a hazy or noisy
picture on the screen. In such a case you can use this
item to get a clear picture by trial and error method.
Press Down button until Phase is highlighted.
Press Left or Right button to adjust the value.
English - 26 -
English
Conguring Sound Settings
You can congure sound settings of your TV by using Sound Settings menu.
Conguring Sound Settings
Sound settings can be congured according to your
personal preferences.
Press MENU button and select Sound by using Left
or Right button. Press OK button to view Sound
Settings menu.
Operating Sound Settings Menu Items
• Press Up or Down button to highlight a menu item.
• Use Left or Right button to set an item.
• Press MENU button to exit.
Volume
Select Volume using Up or Down button and then use
Left or Right button to set volume level.
Equalizer (Only for speaker)
You can customize current sound mode settings. Select
the appropriate mode in accordance with the installation
location of the TV and adjust the equalizer on-screen as
desired. Press OK button to view equalizer submenu.
In equalizer menu, the preset can be changed to Music,
Movie, Speech, Flat, Classic and User. Press the
MENU button to return to the previous menu.
Note: Equalizer menu settings can be changed
manually only when the Equalizer Mode is in User.
Balance (Only for speaker)
This setting is used for emphasizing left or right speaker
balance.
• Press Left or Right button to change the level of the balance.
Balance level can be adjusted between -31 and +31.
Headphone
This setting is used to set the sound output when
headphones are connected.
• Press Up or Down button to select Headphone.
• Press Right button to increase headphone volume level.
Press Left button to decrease headphone volume level.
Headphone volume level can be adjusted between 0
and 63.
Sound Mode
This setting is used to set the Sound Mode. Higlight
Sound Mode by using Up or Down button. Press Left
or Right button to set.
You can select Mono, Stereo, Dual I or Dual II mode,
only if the selected channel supports that mode.
AVL
Sometimes there can be large changes in volume
when switching from a DTV 5.1ch to a DTV 2ch, an
ATV channel, or an external input. Using the AVL
feature reduces these volume differences.
• Press Up or Down to highlight AVL. Press Left or Right
button to set AVL as On or Off.
Digital Out
This setting enables you to set Digital Out preference
as Compressed or PCM. You should set this feature
in accordance with the received broadcast’s content.
Select Digital Out using Up or Down button and then
use Left or Right button to set.
English - 27 -
English
Settings Menu Operation, Conditional Access
Conguring Your TV’s Settings
Detailed settings can be configured to suit your
personal preferences.
Viewing Settings Menu
Press MENU button and select Settings by using Left
or Right button. Press OK button to view Settings
menu.
Press Up or Down button to highlight a menu item.
Press OK button to select an item. Press MENU
button to exit.
Conditional Access: This setting controls conditional
access modules when available. Use Up or Down
button to highlight Conditional Access. Press OK
button to continue.
Language: Congures language settings.
Parental: Congures parental settings.
Timers: Sets timers for selected programmes.
Date/Time: You can congure date/time preferences
by using this menu screen.
Sources: Enables or disables selected source
options.
Other Settings: Displays other setting options of
the TV set.
Using a Conditional Access Module
The Common Interface Slot, situated on the side of the
television, enables the insertion of a CAM (Conditional
Access Module) and card. These are purchased from
a service provider and allow additional subscription
broadcasts to be viewed. For more information, see
a service provider.
IMPORTANT: Insert or remove the CAM only when
the TV is SWITCHED OFF.
• In order to watch certain digital channels, a conditional
access module (CAM) is necessary. This module must
be inserted in the CI slot of your TV.
• Obtain the Conditional Access Module (CAM) and
the viewing card by subscribing to a pay channel
company, then insert those to the TV using the following
procedure.
• Insert the CAM and then the viewing card to the slot that
is located in the terminal cover at the rear side of the TV.
• The CAM should be correctly inserted, it is impossible
to insert fully if reversed. The CAM or the TV terminal
may be damaged if the CAM is forcefully inserted.
Connect the TV to the mains supply, switch on and then
wait for few moments until the card is activated.
• When no module is inserted, “No common interface
module detected.” message appears on the screen.
• Refer to the module instruction manual for details of
the settings.
Viewing Conditional Access Menu (*)
(*) These menu settings may change depending on
the service provider.
Press MENU button and select Settings by using
Left or Right button. Press OK button to view
Settings menu. Use Up or Down button to highlight
Conditional Access and press OK to view menu
items.
English - 28 -
English
Setting Timers
Timers
To view Timers menu, press MENU button and
select Settings by using Left or Right button. Press
OK button to view Settings menu. Use Up or Down
button to highlight Timers and press OK to continue:
Setting Sleep Timer
The television can be set to turn itself off after a certain
length of time.
• Highlight Sleep Timer by using Up or Down button.
• Use Left or Right button to set. The timer can be
set to Off or between 30 minutes and 2 hours (120
minutes) in steps of 30 minutes.
Setting Programme Timers
This feature will set the television to go to a specic
channel at a certain time. It can be used to view a
particular programme or can be used to view a series
of programmes by setting the Repeat option to Daily,
Weekly or Weekdays.
Press Down button to highlight a timer on an event.
Programme timer function buttons will be displayed
on the screen.
Note: This feature will be available only when a timer has
been programmed.
Adding a Timer
Press YELLOW button on the remote control to add
a timer. The Add timer menu appears on the screen:
Network Type: Set the network type to lter the
channels that will be listed in the Channel option.
Timer Type: This feature is unavailable to be set.
Channel: Changes channel by using Left or Right.
Record Type: This feature is unavailable to be set.
Date: Enter a date using the numeric buttons.
Start: Enter a starting time using the numeric buttons.
End: Enter an ending time using the numeric buttons.
Duration: Displays duration between the starting
and ending time.
Repeat: Sets a timer to be repeated as Once, Daily,
Weekly or Weekdays.
Change/Delete: There are two options available,
Allowed and Disallowed. If this option is set as
Disallowed, a PIN(*) is required to change or delete
the programmed timer.
(*) Default PIN is set to 0000.
Press OK button to save the timer. Press RET/BACK
button to cancel.
Editing a Timer
• Select the timer you want to edit by pressing Up or
Down button.
• Press GREEN button to edit.
• When nished with editing, press OK button to save.
You can press RET/BACK button to cancel.
Deleting a Timer
• Select the timer you want to delete by pressing Up
or Down button.
• Press RED button.
• Select Yes by using Left or Right button and press
OK to delete the timer. Select No to cancel.
English - 29 -
English
Conguring Source Settings
You can enables or disable selected source options. The
TV will not switch to the disabled source options when the
SOURCE button is pressed.
• Select Sources in the Settings menu and press
OK button.
• Press Up or Down buttons to select a source.
• Use Left or Right button to enable or disable the
selected source. Changes are automatically stored.
Input Selection
Use the Input Selection window if the television does
not switch over to a connected source automatically.
Press SOURCE button on your remote control for
directly changing sources. Use the Up or Down button
to highlight an input and press Right button to select.
Conguring Date/Time Settings
You can congure date/time preferences by using
this menu screen.
• Select Date/Time in the Settings menu to congure
Date/Time settings. Press OK button.
Use Up or Down button to highlight the Time Settings
Mode. It can be set to Auto or Manual.
When Auto is selected, Date, Time and Time Zone
options will not be available to be set. If Manual option
is selected as the Time Zone can be altered:
Press Up or Down button to select Time Zone.
Use Left or Right button to change the Time Zone
between GMT-12 or GMT+12. Date/Time on the top
of the menu list will then change according to the
selected Time Zone.
Note: For countries without Digital channels, only the
Date and Time option will be displayed.
Setting Date/Time Source Settings
English - 30 -
English
Other Controls
Conguring Other Settings - General
You can congure the settings of your TV. Select
Settings from main menu and press OK to view the
Settings menu. Press the MENU button on the remote
control to exit.
To view general conguration preferences, select
Other Settings in the Settings menu and press OK
button.
Operation
• Press Up or Down button to select an item.
• Use Left or Right button to set an option or press
OK button to view a sub-menu.
Menu Timeout
To set a specic display timeout for menu screens,
set a value for this option.
In the Other Settings menu, select Menu Timeout
and choose 15 sec, 30 sec, 60 sec or Off using Left
or Right button.
Scan Encrypted Channels
When this setting is set as Yes, search process will
locate the encrypted channels as well. If it is set as
No manually, encrypted channels will not be located
while in automatic search or manual search. Scan
Encrypted Channel feature will always be Yes after
performing rst time installation.
• In the Other Settings menu, use Up or Down button
to select Scan Encrypted.
• Press Left or Right button to set this function as
Yes or No.
Blue Background
If the signal is weak or absent, the TV will automatically
change to a blue screen. To enable this, set Blue
Background to On.
• In the Other Settings menu, select Blue
Background and choose On or Off using Left or
Right button.
Software Upgrade
This feature helps to keep your TV updated. It works
automatically and searches for new information when
available.
You can enable or disable automatic upgrade by
setting the Automatic Scanning option.
You can manually start searching for new software by
selecting Scan for upgrade and pressing OK button.
Press RET/BACK or MENU button to cancel the
process.
Application Version
Displays the current application version.
Hard of Hearing
If the broadcaster enables any special signal
concerning the audio, you can set this setting as On
to receive such signals.
• Use Up or Down button to select Hard of Hearing
and then press Left or Right button to set this setting
as On or Off.
Audio Description
Audio description refers to an additional narration
track for blind and visually impaired viewers of visual
media, including television and movies. The description
narrator talks through the presentation, describing
what is happening on the screen during the natural
pauses in the audio (and sometimes during dialogue,
if deemed necessary). You can use this feature, only if
the broadcaster supports that additional narration track.
• Highlight Audio Description by pressing Up or
Down button.
• Press OK button to enter Audio Description
submenu.
English - 31 -
English
• Use Up or Down button to select Audio Description
setup and then press Left or Right button to set
this setting.
Auto TV Off
You can set the timeout value of auto off feature. After
the timeout value is reached and the TV is not operated
for selected time, the TV will go off. Press MENU button
and select Settings by using Left or Right button. Press
OK button to continue. Use Up or Down button to select
Other Settings and then press OK button. Select Auto
TV Off using Up or Down button.
Standby Search
If the Standby Search is set to On and the TV is in
standby mode, the TV will look for any changes in
the saved channels. Press MENU button and select
Settings by using Left or Right button. Press OK
button to continue. Use Up or Down button to select
Other Settings and then press OK button. Select
Standby Search using Up or Down button and use
Left or Right button to set.
Store Mode
If you set Store Mode to Enabled, your TV’s
features will be illustrated on the top of the screen. To
deactivate this feature, set to Disabled.
Power Up Mode
This setting congures the power up mode preference.
Standby: The TV always powers up in Standby mode.
Last State: The TV always switches on with the last
selected channel/source.
Other Controls - continued
English - 32 -
English
Using Media Browser
This TV allows you to enjoy photo, music or video les stored on a USB device.
• Depending on the le size and amount in your USB
storage device, it may take some time for loading
to view. A message will be displayed on the screen
when loading les from the USB device.
• Only limited types of USB devices are supported.
Therefore, it is suggested not to use USB for playing
Media Player.
• Non-supported characters will be replaced with a
square (□).
Manual Start
To display Media Browser window, press the
button on the remote control. The Media Browser
menu is also accessable from the main menu. Press
the MENU button on the remote. Select Media
Browser by pressing Left or Right button and press
OK.
Select the media type to be listed and press OK.
Auto Start
When you plug a USB storage device, the following
menu will be displayed.
You can play or view music, video and picture les
from an USB storage device connected to the USB
port.
To display the les with folders, select Settings tab
and change View Style to Folder. So the selected
type of les in the selected folder will be displayed.
Additionally the All tab will be added to the main
Media Browser menu. To list all available music,
video and picture les in the selected folder at once,
select All tab and press OK button.
If View Style is set to Flat, all selected type of les
will be listed. If for instance, Video is selected in the
main Media Browser menu, TV will search the source
for all video les and list them.
Note:
Some USB compliant devices may not be supported.
If the USB storage device is not recognized after
power off/on or First Time Installation, plug the USB
device out and power off/on the TV set. Then plug
it in again.
• Do not use a USB Hub.
• You must obtain any required permission from
copyright owners to use copyright content.
Toshiba cannot and does not grant such permission.
English - 33 -
English
Playing MP3 Files
To play mp3 les from a USB memory, you can use
this menu screen.
• / : Navigate menu.
• Play ( button): Start to play all files listed
beginning with the selected one.
• Stop ( button): Stop the playback.
• Pause ( button): Pause/Resume the playback.
• Red button: Sort les by Title, Artist or Album.
Note: If the Viewing Style in Media Browser Settings
menu is set to Folder, the les will be displayed as
sorted and there is no need to sort les again by
pressing the RED button. In that case the RED button
will not function anyway.
• Loop/Shufe (Green button): Press once to enable
Loop. Press again to enable both Loop and Shufe.
Press once more to disable Loop. Press again to
disable Shufe. You can follow the disabled and
enabled functions with the change of the icons.
• Jump (Numeric buttons): Type the le number
using the numeric buttons on your remote to jump
to a le directly. The le with the typed number will
be only highlighted and will not be played.
• Play This (OK button): Play the selected le.
• Previous/Next (Left/Right buttons): Jump to
previous or next le and play.
• Yellow button: Change viewing style.
• Blue button: Change media type.
Viewing JPEG Files
To view photo les from a USB Memory, you can use
this menu screen. When you select Photos in the
main Media Browser menu, available image les will
be ltered and listed on this screen.
• / : Navigate menu.
• Jump (Numeric buttons): Type the le number
using the numeric buttons on your remote to jump
to a le directly.
• OK: View the selected image in full-screen.
• Slideshow ( button): Start the slideshow to view
all the images automatically.
• Green button: View the images in thumbnails. Press
again to turn back to previous layout.
• Red button: Sort les by date.
• Yellow button: Change viewing style.
• Blue button: Change media type.
Using Media Browser - continued
This TV allows you to enjoy photo, music or video les stored on a USB device.
English - 34 -
English
Slideshow Feature
You can use this feature to display all images
automatically on your USB device.
• Pause ( button): Pause the slideshow.
• Continue ( button): Continue the slideshow.
• Loop/Shufe (Green button): Press once to enable
Loop. Press again to enable both Loop and Shufe.
Press once more to disable Loop. Press again to
disable Shufe. You can follow the disabled and
enabled functions with the change of the icons.
• Previous/Next (Left/Right buttons): Jumps to
previous or next le on slideshow. When pressed,
the slideshow pauses.
• Rotate (Up/Down buttons): Rotate the image using
up/down buttons. When pressed, the slideshow
pauses.
• Return/Back: Back to le list.
• Info button: Display info bar.
Video Playback
When you select Videos from Media Browser menu,
available video les will be ltered and listed on this
screen. You can use Up or Down button to select a
video le and press OK button to play a video.
Note: If you select a subtitle le and press OK button,
you can select or deselect that subtitle le.
Jump (Numeric buttons): Type the le number using
the numeric buttons on your remote to jump to a le
directly. The le with the typed number will be only
highlighted and will not be played.
Play This (OK button): Play the selected le.
/ : Navigate menu.
Using Media Browser - continued
This TV allows you to enjoy photo, music or video les stored on a USB device.
LANG (Play Preview): Display selected le in a small
preview screen. Press again to stop preview.
Red button: Sort les by name.
Play ( button): Start to play all les listed beginning
with the selected one.
Yellow Button: Change viewing style.
Loop/Shufe (Green button): Press once to enable
Loop. Press again to enable both Loop and Shufe.
Press once more to disable Loop. Press again to
disable Shufe. You can follow the disabled and
enabled functions with the change of the icons.
Blue: Change media type.
Play ( button): Start the video playback.
Stop ( button): Stop the video playback.
Pause ( button): Pause the video playback.
Rewind ( button): Goes backward.
Forward ( button): Goes forward.
Previous/Next (Left/Right buttons): Plays the
previous/next le.
Subtitle/Audio (LANG button): Set Subtitle/Audio.
Green: Jumps to the selected time.
Ret/Back: Back to le list.
Yellow: Open subtitle time correction menu.
Press OK to conm.
Press BLUE button to clear.
Press RET/BACK button to switch back to previous
menu.
English - 35 -
English
Note:
You can set subtitles by using OK button before
starting the playback or by using LANG button during
the playback. Selected subtitles may not be displayed
correctly in some cases.
In order to display movie subtitles correctly, you should
set a subtitle language. See the section, Subtitle
in Language Settings for selecting movie subtitle
language.
Media Browser Settings
You can set your Media Browser preferences by using
the Settings dialogue. Press Up or Down button to
highlight an item and use Left or Right button to set.
View Style: Set default browsing mode. Set as Flat to
list all selected type of les stored in the USB device.
Set as Folder to list all selected type of les in the
selected folder.
Slideshow Interval: Set slide show interval time.
Show Subtitle: Set subtitle enabling preference.
Subtitle Language: Set supported subtitle language.
Subtitle Position: Set subtitle position as Up or
Down.
Subtitle Font Size: Set subtitle font size (max. 47pt).
To Close the Media Player
• Press MENU button on the remote control.
Using Media Browser - continued
This TV allows you to enjoy photo, music or video les stored on a USB device.
English - 36 -
English
Analogue Only Text Services
This television has a multi-page text memory, which takes a few moments to load.
Analogue Text Services
Before using the text services, the required language
region must be chosen.
• Select Language from the Settings menu.
• Highlight Teletext in the Language Settings
menu and press Left or Right button to choose the
required language region.
After the Teletext language is selected, press MENU
button to exit.
Using Text Button -TEXT
• To view text services press TXT. Press TXT again to
superimpose text over a normal broadcast picture.
• Press TXT again to return to normal viewing.
• Programmes cannot be changed until text is
cancelled.
• The rst text page shown will be the initial page.
• Any text page can be accessed by entering the 3
digit page number using the numbered buttons.
Press CH / or Up/Down buttons to go to the
next/previous page.
• Four coloured titles will appear at the base of the
screen. To access one of the four given subjects,
press the relevant coloured button on the remote
control.
• For further information on your particular text
system(s), see the broadcast text index page or,
consult your local Toshiba dealer.
Below is a guide to the functions of the remote control
text buttons.
Acessing Sub-Pages
If a text page has sub-pages, press Left/Right buttons
or enter the sub-page number 0001, 0002, 0003 etc.
to access.
Revealing Concealed Text
To discover the solutions on quiz and joke pages press
the INFO button.
Holding a Page
At times it is convenient to hold a page of text. Press
OK and “HOLD” will appear in the top left of the
screen. The page will be held on screen until the
button is pressed again.
To display an initial page
Press RET/BACK to access an initial page. The one
displayed is dependant on the broadcaster.
English - 37 -
English
Appendix A: PC Input Typical
Display Modes
The following table is an illustration of some of the
typical video display modes. Some, due to the display
native resolution, are scaled automatically to enable
correct image to be displayed.
Your TV may not support different resolutions.
Supported resolution modes are listed below.
If you switch your PC to an unsupported mode, a
warning OSD will appear on the screen.
Index Resolution Frequency
1 1024x768 60 Hz
2 1280x768 60 Hz
3 1360x768 60 Hz
4 800x600 56 Hz
5 800x600 60 Hz
6 1280x1024 60 Hz
7 1280x960 60 Hz
8 1400x1050 60 Hz
9 1600x1200 60 Hz
10 1920x1080 60 Hz
English - 38 -
English
Appendix B: AV and HDMI Signal Compatibility (Input Signal Types)
Source Supported Signals Available
EXT
(SCART)
PAL 50/60 O
NTSC 60 O
RGB 50 O
RGB 60 O
Side AV
PAL 50/60 O
NTSC 60 O
PC/
YPbPr
480I, 480P 60Hz O
576I, 576P 50Hz O
720P 50Hz,60Hz O
1080I 50Hz,60Hz O
1080P 50Hz,60Hz O
HDMI
480I 60Hz O
480P 60Hz O
576I, 576P 50Hz O
720P 50Hz,60Hz O
1080I 50Hz,60Hz O
1080P
24Hz, 25Hz
30Hz, 50Hz,
60Hz
O
Note: In some cases a signal on the LCD TV may not be displayed properly. The problem may be an
inconsistency with standards from the source equipment (DVD, Set-top box, etc.). If you do experience such
a problem please contact your dealer and also the manufacturer of the source equipment.
English - 39 -
English
Appendix C: PIN Information
Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the
mains plug from the wall socket.
Signal information for Mini D-sub 15 pin connector
Pin No. Signal name Pin No. Signal name Pin No. Signal name
1 R 6 Ground 11 NC
2 G 7 Ground 12 NC
3 B 8 Ground 13 H-sync
4 NC* 9 NC 14 V-sync
5
NC 10 Ground 15 NC
* NC = not connected
English - 40 -
English
Appendix D: Supported File Formats for USB Mode
Media Extension Format Notes
Video .mpg,
.mpeg
MPEG1-2 MPEG1: 768x576 @ 30P, MPEG2:1920x1080 @ 30P
.vob MPEG2
1920x1080 @ 30P
.mp4 MPEG4, Xvid,
H.264
.mkv H.264,
MPEG4,VC-1
.avi MPEG2,
MPEG4, Xvid,
H.264
.v H.264/VP6/
Sorenson
H.264/VP6: 1920x1080 @ 30P
Sorenson: 352x288 @ 30P
.3gp MPEG4 , H.264 1920x1080 @ 30P
Audio .mp3 MPEG1 Layer
2/3
Layer2: 32Kbps ~ 448Kbps (Bit rate) / 32kHz, 44.1kHz, 48kHz, 16kHz,
22.05kHz, 24kHz (Sampling rate)
Layer3: 32Kbps ~ 320Kbps (Bit rate) / 32kHz, 44.1kHz, 48kHz, 16kHz,
22.05kHz, 24kHz, 8kHz, 11.025kHz, 12kHz (Sampling rate)
(works
only with
video
les)
AC3 32Kbps ~ 640Kbps (Bit rate) / 32kHz, 44.1kHz, 48kHz (Sampling rate)
AAC 16Kbps ~ 576Kbps (Bit rate) / 48kHz, 44.1kHz, 32kHz, 24kHz, 22.05kHz,
16kHz, 12kHz, 11.025kHz, 8kHz (Sampling rate)
EAC3 32Kbps ~ 6Kbps (Bit rate) / 32kHz, 44.1kHz, 48kHz (Sampling rate)
LPCM Unsigned 8bit PCM, Signed/Unsigned 16bit PCM (big / little endian), 24bit
PCM (big endian), DVD LPCM 16/20/24bit (Bit rate)
/ 6kHz, 8kHz, 11.025kHz, 12kHz, 16kHz, 22.05kHz, 24kHz, 32kHz,
44.1kHz, 48kHz , 88.2kHz, 96kHz, 176.4kHz, 192kHz (Sampling rate)
IMA-ADPCM/
MS-ADPCM
LBR
32Kbps ~ 96Kbps (Bit rate) / 32kHz, 44.1kHz, 48kHz (Sampling rate)
Picture
.jpeg
Baseline Resolution(WxH): 17000x10000
Progressive Resolution(WxH): 4000x4000
.bmp
-
Resolution(WxH): 5760x4096
Subtitle
.sub, .srt - -
English - 41 -
English
Specications and Accessories
Broadcast Systems/Channels
DVB-T MPEG2, DVB-T MPEG4 HD
DVB-C MPEG2, DVB-C MPEG4
Video Input PAL, SECAM, NTSC 4.43
Stereo Nicam
External Connections
1-SCART 1 Input 21-pin SCART RGB, A/V
2-SCART-S (via SCART 1) Input 21-pin SCART S-Video
3-YPbPr (via VGA) Input Mini D-Sub 15-Pin Analogue
4-SIDE AV Input RCA Video + Audio L + R
5-HDMI 1/2 Input Type A
6-VGA/PC Input Mini D-Sub 15-Pin Analogue RGB Signal
7-Digital Audio Output S/PDIF (Coaxial)
USB Port Media Browser Interface Version: USB 2.0
USB Class: Mass Storage
File System: FAT32
Headphone Socket 3.5mm stereo
Operating Conditions Temperature 5°C - 35°C (41°F - 94°F)
Humidity 20 - 80% (non-condensing)
Supplied Accessories Remote Control
2 batteries (AAA,IEC R03 1.5V)
Four screws
Stand xing cover
P Clip
32” W
Energy Efciency Class
A
Visible Screen Size (approx.)
80cm / 32”
On Mode Power Consumption (approx.) (*)
36 W
Annual Power Consumption (approx.) (**)
52 kWh
Standby Power Consumption (approx.)
< 0.50 W
Screen Resolution (pixels)
1366 x 768
Display
16:9
Sound Output (at 10% distortion)
2 x 6
Power Consumption Model (approx.)
65W
Weight TV with stand
8.50 kg
Gross weight
12.5 kg
TV without stand
7.00 kg
(*) Tested in accordance with IEC 62087-BD in default settings.
(**) Energy consumption 52 kWh per year, based on the power consumption of the television operating 4 hours per day for
365 days. The actual energy consumption will depend on how the television is used.
Specication is subject to change without notice.
A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm)
32W143*DG 745.24 454.52 215.35 103.61 497.58 200 100
English - 42 -
English
License Information
• The terms HDMI and High-Denition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
• DVB is a registered trademark of the DVB Project.
• [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth
digital content protection, which is being standardized for reception of high-denition video signals. Because
this is an evolving technology, it is possible that some devices may not operate properly with the television.
MP3 licence letter
MPEG Layer-3 audio coding technology licensed from Fraunhofer LLS and Thomson.
AVC licence letter
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFORIO LICENSE FOR THE PERSONAL
AND NON-COMMERCIAL USE OF A CONSUMER TO (I)ENCODE VIDEO IN COMPLIANCE WITH THE AVC
STANDARD (“AVC VIDEO”) AND/OR (II)DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER
ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO
PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED
FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA,L.L.C. SEE
HTTP://WWW.MPEGLA.COM
Licence Notication
TRADEMARK ACKNOWLEDGMENT
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
Disposal...
The following information is only for EU-member states:
Disposal of products
The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of
separately from household waste. Integrated batteries and accumulators can be disposed of with the
product. They will be separated at the recycling centres. The black bar indicates that the product was
placed on the market after August 13, 2005. By participating in separate collection of products and
batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent
potential negative consequences for the environment and human health.
For more detailed information about the collection and recycling programmes available in your country,
please visit our website (www.toshiba.eu/recycling) or contact your local city ofce or the shop where you
purchased the product.
Disposal of batteries and/or accumulators
The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected
and disposed of separately from household waste. If the battery or accumulator contains more than
the specied values of lead (Pb), mercury (Hg), and/or cadmium (Cd) dened in the European Battery
Directive, then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below
the crossed out wheeled dust bin symbol.
By participating in separate collection of batteries, you will help to assure the proper disposal of products
and batteries and thus help to prevent potential negative consequences for the environment and human
health.
For more detailed information about the collection and recycling programmes available in your country,
please visit our website (www.toshiba.eu/recycling) or contact your local city ofce or the shop where you
purchased the product.
English - 43 -
English
Q & A Section
Question
Answer
Sound
Why is there no sound or picture?
“Check the TV is not in standby mode.
Check the mains plug and all mains connections”
Why is there a picture but no sound?
Check the volume has not been turned down or that sound mute
has not been selected
Picture
Why doesn’t the video / DVD being
played show on screen?
Make sure the BLU-ray or DVD player is connected to the TV as
illustrated in the beginning chapters, then selesct the correct input
by pressing SOURCE.
General
Why when digital subtitles have
been selected are they not shown
on screen?
Subtitles are not currently being transmitted by the broadcaster
Why are encrypted digital channels
unavailable?
You need a subscription package. Contact service provider.
Why does the active standby LED
sometimes take longer to go out?
When in active standby, the TV's active standby will automatically
search all available channels for updates, provided automatic
update is enabled. The time taken to do this may vary. Led blinks
as red and green in this mode.
What can be done if the pin number
has been forgotten?
You can reset the TV and perform the rst time installation again.
Ensure that no one else is aware of this procedure by securely
storing the Owner’s Manual.
English - 44 -
English
This equipment corresponds to requirements of the Technical Regulation on limitation of usage of
certain dangerous substances in electrical and electronic equipment.
REACH information
The European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization and
Restriction of Chemicals), entered into force on 1 June 2007, with phased deadlines to 2018.
Toshiba will meet all REACH requirements and is committed to provide our customers with information
about the presence in our articles of substances included on the candidate list according to REACH
regulation.
Please consult the following website www.toshiba.eu/reach for information about the presence in our
articles of substances included on the candidate list according to REACH in a concentration above
0.1 % weight by weight.
EU Conformity Statement
This product is carrying the CE-Mark in accordance with the related European Directives.
Responsible for CE-Marking is TOSHIBA, 23 Davy Road, Plymouth, PL6 8BY UK.
This product is labeled with the CE Mark in accordance with the related European Directives, notably
Low Voltage Directive 2006/95/EC, Electromagnetic Compatibility Directive 2004/108/EC and RoHS
Directive 2011/65/EU. Furthermore the product complies with the Ecodesign Directive 2005/32/EC (EuP)
and 2009/125/EC (ErP) and its related implementing measures.
© TOSHIBA 23 Davy Road, Plymouth Devon PL6 8BY England
All rights reserved.
Reproduction in whole or part without written permission is strictly prohibited.
If you wish to view the advanced functions but do not have access to a computer or
the internet then please contact your nearest owner’s manual Helpline number from the
numbers shown below.
Country name locally Contact Number
Österreich 0810 - 144 122 (7,3 ct/min aus dem Festnetz der Telekom Austria, Mobil ggf. abweichend)
Belgique / Belgie 02 391 01 01
България 029421141
Hrvatska 01 653 9737
Κύπρος 22872111
Českárepublika 323204191
Danmark 80 88 93 38
EesVabariik 6997800
Suomen tasavalta 0800 77 35 03
France 09 69 32 64 84
Deutschland 02131 52 40 999 (Ortstarif, abweichender Mobilfunktarif möglich)
Gibralter 200 76334
Ελληνική 2109554298
MagyarKöztársaság 23428870
Ísland 00 45 80 88 93 38
Yisrā’el 039535900
Italia 039 609 9301
Latvijas 00 372 69 97 800
Lietuvos 00 372 69 97 800
Luxembourg 00 32 2 391 01 01
Moldova 00380 443 511 317
Nederlanden 00 32 2 391 01 01
Norge 800 573 57
Polska 0 71 796 95 05
Portugal 707 265 265
RepublicofIreland 012467780
România 021 3169 393
Россия 88001000505
Slovensko 0042 323 204191
España 902332234
Sverige 0201 70 16 00
Schweiz / Suisse 0900 57 58 58 (CHF 1.49 / Min.)
Türkiye 0 212 340 6080
U.K. 0871 495 0730
Україна 8(044)3511317
Please note the telephone number only applies to advanced owner’s manual enquiries
and not general operation of the TV.
Loading...