Toshiba 32TL868, 40TL868, 46TL868 User Manual
TL86* Digital
Series
Contents
English
INSTALLING YOUR TV
Safety Precautions ............................................................................. 4
Installation and important information ..................................... 5
The remote control ........................................................................... 8
Inserting batteries and effective range ............................ 8
CONNECTING YOUR TV
Connecting external equipment .................................................. 9
Connecting an HDMI® device ......................................................10
To connect an HDMI device ...............................................10
Connecting a computer ................................................................11
To connect a PC to the RGB/PC terminal .......................11
To connect a PC to the HDMI terminal ...........................11
Connecting a home network ......................................................12
To connect the TV to a home network - Wired ...........12
To connect the TV to a home network with an internet
connection - Wireless .......................................................12
Controls and input connections .................................................13
Switching on ............................................................................13
Using the menu system .......................................................13
Using the TV controls and connections .........................13
SETTING UP YOUR TV
Startup Application .........................................................................14
Quick Setup ..............................................................................14
Ant/Cable/Satellite (if available) .......................................15
Satellite Settings .....................................................................16
Auto Tuning .............................................................................18
ATV Manual Tuning .........................................................................19
Tuning ........................................................................................19
Skip ..............................................................................................20
Sorting positions ....................................................................20
DTV Manual Tuning ........................................................................21
Manual Tuning ........................................................................21
Manual Tuning for DVB-C ...................................................21
Manual Tuning for DVB-S ....................................................21
DTV Settings ......................................................................................22
Channels (Antenna/Cable) .................................................22
Channels (Satellite) ................................................................23
Location setting ......................................................................23
Analogue switch-off ............................................................23
CONTROLS AND FEATURES
General controls ...............................................................................24
Quick Menu ..............................................................................24
Selecting channels ................................................................ 24
The Time Display – analogue only .................................24
Stereo and Bilingual transmissions .................................24
Using 3D functions .........................................................................25
Viewing 3D images ............................................................... 25
Switching display mode or selecting 3D format ........25
Setting the auto start mode .............................................. 27
Setting the 3D PIN code ......................................................27
Setting 3D Start Message .................................................... 27
Setting 3D Lock ......................................................................28
Setting 3D Timer Lock .......................................................... 28
Setting Enable 3D Timer .....................................................28
Displaying 3D Important Info ............................................ 28
Switching left and right images .......................................28
Sound controls .................................................................................29
Volume controls and sound mute ...................................29
Dual ............................................................................................. 29
Balance ......................................................................................29
Bass, Treble .............................................................................. 29
Voice Enhancement .............................................................. 29
Dynamic Bass Boost ..............................................................29
Stable Sound® .........................................................................29
Dynamic Range Control ......................................................29
Audio Level Offset .................................................................30
Headphone Settings .............................................................30
Audio Description ................................................................. 30
Widescreen viewing ....................................................................... 31
Picture controls ................................................................................ 33
Picture Mode ...........................................................................33
Picture preferences ...............................................................33
Reset ...........................................................................................33
ColourMaster ...........................................................................33
Base Colour Adjustment .....................................................34
Colour Temperature .............................................................34
Auto Brightness Sensor .......................................................34
Active Backlight Control ...................................................... 34
Black/White Level ..................................................................34
MPEG NR – Noise Reduction ..............................................34
DNR – Digital Noise Reduction .........................................34
Active Vision ............................................................................35
Resetting the advanced picture settings ......................35
Automatic Format (Widescreen) ......................................35
4:3 Stretch ................................................................................ 35
Blue Screen .............................................................................. 35
Picture Position ...................................................................... 35
Picture still ................................................................................ 35
Using your home network ...........................................................36
Setting up the Network ................................................................. 37
Wireless Setup ........................................................................ 37
Advanced Network Setup .................................................. 39
DNS Setup ................................................................................ 40
Network Connection Test ................................................... 40
Using the software keyboard ............................................41
2
Using Toshiba Places ......................................................................41
Using YouTube™ ..............................................................................42
Using Hybrid TV Standard
(if available) ....................................................................................42
Using the Media Player ..................................................................43
Basic operation .......................................................................43
Viewing photo files
(on a DLNA CERTIFIED™ Server or USB device) .......44
Viewing movie files
(on a DLNA CERTIFIED™ Server or USB device) .......46
Playing music files
(on a DLNA CERTIFIED™ Server or USB device) .......48
Other features ................................................................................... 49
Panel Lock .................................................................................49
The timers ...........................................................................................50
Programme Timers – digital only ...................................50
On Timer ....................................................................................50
Sleep Timer ..............................................................................51
Energy Saving Settings ..................................................................51
Automatic Power Down ......................................................51
No Signal Power Down ........................................................51
Digital on-screen information and Programme Guide ......52
Information ..............................................................................52
Guide .......................................................................................... 53
Genre selection/searching ..................................................53
Digital settings – parental control ............................................54
Parental PIN Setup .................................................................54
Parental Setup .........................................................................54
Network Lock .......................................................................... 54
Digital settings – Channel Options ..........................................55
Selecting favourite channels .............................................55
Favourite Channel Lists .......................................................55
Skip channels ...........................................................................55
Locking channels ...................................................................55
Digital settings – other settings ................................................56
Subtitles .....................................................................................56
Audio languages ....................................................................56
Common Interface ................................................................56
Software Upgrade and Licences ................................................57
Searching for New Software ..............................................57
Network Upgrade ..................................................................57
Software Licences ..................................................................57
System Information and Reset TV ..............................................57
System Information ............................................................... 57
Reset TV .....................................................................................57
PC Settings .........................................................................................58
Horizontal and Vertical Position .......................................58
Clock Phase ..............................................................................58
Sampling Clock .......................................................................58
Reset ...........................................................................................58
Input selection and AV connections .........................................59
Input selection ........................................................................59
External input skip .................................................................59
Labeling video input sources ............................................60
Digital Audio Output ............................................................60
TEXT SERVICES
Text services ......................................................................................61
Selecting modes ....................................................................61
Text information ....................................................................61
Navigating pages using Auto ............................................61
Navigating pages using LIST .............................................61
Control buttons ......................................................................62
PROBLEM SOLVING
Questions and Answers ............................................................... 63
INFORMATION
License Information ........................................................................ 66
Information ........................................................................................ 68
Specifications and accessories ................................................... 74
English
3
INSTALLING YOUR TV
Safety Precautions
English
This equipment has been designed and
manufactured to meet international safety standards
but, like any electrical equipment, care must be taken
to obtain the best results and for safety to be assured.
Please read the points below for your own safety.
They are of a general nature, intended to help with all
electronic consumer products, and some points may
not apply to the goods you have just purchased.
Air Circulation
Leave more than 10cm clearance around the
television to allow adequate ventilation. This will
prevent overheating and possible damage to the
television. Dusty places should also be avoided.
Heat Damage
Damage may occur if the television is left in direct
sunlight or near a heater. Avoid places subject to
extremely high temperatures or humidity. Place in a
location where the temperature remains between
5°C min. and 35°C max.
Mains Supply
The mains supply required for this equipment is 220240v AC 50/60Hz. Never connect to a DC supply or any
other power source. DO ensure that the television is
not standing on the mains lead. Use only the supplied
lead.
DO NOT cut off the mains plug from this equipment,
this incorporates a special Radio Interference Filter,
the removal of which will impair its performance.
IF IN DOUBT, PLEASE CONSULT A COMPETENT
ELECTRICIAN.
Do
DO read the operating instructions before you
attempt to use the equipment.
DO ensure that all electrical connections (including
the mains plug, extension leads and interconnections between pieces of equipment) are
properly made and in accordance with the
manufacturers’ instructions. Switch off and withdraw
the mains plug before making or changing
connections.
DO consult your dealer if you are ever in doubt about
the installation, operation or safety of your
equipment.
WARNING: To prevent injury, this apparatus must be
securely attached to the floor/wall in accordance with
the installation instructions. See page 5.
DO be careful with glass panels or doors on
equipment.
DO NOT REMOVE ANY FIXED COVERS AS THIS WILL
EXPOSE DANGEROUS AND ‘LIVE’ PARTS.
THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE
AND THEREFORE SHOULD BE READILY OPERABLE.
Do not
DO NOT obstruct the ventilation openings of the
equipment with items such as newspapers,
tablecloths, curtains, etc. Overheating will cause
damage and shorten the life of the equipment.
DO NOT allow electrical equipment to be exposed to
dripping or splashing or objects filled with liquids,
such as vases, to be placed on the equipment.
DO NOT place hot objects or naked flame sources,
such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and
lead to fires.
WARNING: To prevent the spread of
fire, keep candles or other open
flames away from this product at all
times.
DO NOT use makeshift stands and NEVER fix legs with
wood screws. To ensure complete safety, always fit
the manufacturer’s approved stand, bracket or legs
with the fixings provided according to the
instructions.
DO NOT leave equipment switched on when it is
unattended, unless it is specifically stated that it is
designed for unattended operation or has a standby
mode. Switch off by withdrawing the plug, and make
sure your family knows how to do this. Special
arrangements may need to be made for people with
disabilities.
DO NOT continue to operate the equipment if you
are in any doubt about it working normally, or it is
damaged in any way – switch off, withdraw the mains
plug and consult your dealer.
WARNING – excessive sound pressure from
earphones or headphones can cause hearing loss.
ABOVE ALL - NEVER let anyone, especially
children, push or hit the screen and cabinet back,
or push anything into holes, slots or any other
openings in the case. These actions will damage
screen or internal parts.
NEVER guess or take chances with electrical
equipment of any kind - it is better to be safe than
sorry.
4
INSTALLING YOUR TV
Stand style is dependent on model
Sturdy tie (as short as possible)
Stand clip
Fixing strap
Screw
(supplied)
Fixing strap
‘P’ Clip
CAUTION: The diameter and length of the screws
differ depending on wall bracket model. Use of screws
other than the screws specified may result in internal
damage to the TV set or cause it to fall, etc.
Place four spacers (supplied).
Screw
Spacer (supplied)
TV back panel
Wall bracket
28–32mm
M6 (32TL)
M8 (40TL and 46TL)
Four screws
Installation and important information
Where to install
Locate the television away from direct sunlight and strong
lights. Soft, indirect lighting is recommended for
comfortable viewing. Use curtains or blinds to prevent
direct sunlight falling on the screen.
Place the TV on a stable, level surface that can support
the weight of the TV. In order to prevent injury and
maintain stability of this apparatus, secure the TV to
the level surface using the strap if fitted, or to a wall
using a sturdy tie to the P clips provided. Otherwise
secure the TV on the level surface using the supplied
mounting screw.
The LCD display panels are manufactured using an
extremely high level of precision technology; however,
sometimes some parts of the screen may be missing
picture elements or have luminous spots. This is not a sign
of a malfunction.
Make sure the television is located in a position where it
cannot be pushed or hit by objects, as pressure will break
or damage the screen. Also, please be certain that small
items cannot be inserted into slots or openings in the case.
Cleaning the screen and cabinet…
Turn off the power, and clean the screen and cabinet with a soft, dry cloth. The enclosed cleaning cloth is for
cabinet cleaning. We recommend that you do not use any proprietary polishes or solvents on the screen or
cabinet as this may cause damage.
When using a Wall Bracket
Please use a wall bracket appropriate for the size and weight
of the LCD TV.
• Two people are required for installation.
• To install a wall-mount from another manufacturer, use the
SPACERS (supplied).
1 Unplug and remove any cables and/or other component
connectors from the rear of the TV.
2 Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket.
3 Follow the instructions provided with your wall bracket.
Before proceeding, make sure the appropriate bracket(s)
are attached to the wall and the back of the TV as
described in the instructions provided with the wall
bracket.
4 Make sure to place the spacers supplied between the
bracket and the back of the TV.
5 Always use the screws supplied or recommended by the
wall mount manufacturer.
Removing the Pedestal Stand:
1 Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket. Leave the
stand protruding over the edge of the surface.
NOTE: Extreme care should always be used when
removing the pedestal stand to avoid damage to the LCD
panel.
2 Remove the four screws.
3 Once you have removed all four screws holding the
pedestal stand in place, remove the pedestal stand from
the TV by sliding the pedestal stand away from the TV.
English
5
INSTALLING YOUR TV
English
When using the 3D glasses (not supplied)
Cautions on watching 3D images
• Some viewers may experience a seizure or blackout
when exposed to certain flashing images or lights
contained in certain 3D television pictures or video
games.
Anyone who has had a seizure, loss of awareness, or other
symptoms linked to an epileptic condition, or has a family
history of epilepsy, should contact a health care provider
before using the 3D function.
• Avoid use of the 3D function when under the influence
of alcohol.
• If you are ill or feel ill, you should refrain from viewing
3D images, and consult your health care provider as
may be appropriate.
• If you experience any of the following symptoms when
viewing 3D video images, stop viewing and contact
your health care provider:
Convulsions, eye or muscle twitching, loss of awareness,
altered vision, involuntary movements, disorientation, eye
strain, nausea/vomiting, dizziness, headaches.
• If you feel eye fatigue or other discomfort from viewing
3D video images, remove the 3D glasses and
discontinue use until the condition is eliminated.
• Viewing in 3D may cause dizziness and/or
disorientation for some viewers.
Therefore, to avoid injury do not place your TV near open
stairwells, balconies, or wires.
Also do not sit near objects that could be broken if
accidentally hit.
• When viewing 3D images, always wear 3D glasses.
Watching 3D images without 3D glasses may cause eye
strain.
Use specified 3D glasses.
• When watching 3D images, do not wear 3D glasses at an
angle and do not lie down.
If you watch while lying down or with the glasses tilted, the
3D effect is lost and it may cause eye strain.
• It is recommended that the viewer's eyes and 3D glasses
are level with the screen.
• If you have prescription eye glasses or contact lenses,
wear the 3D glasses over them.
Watching 3D images without appropriate eyewear may
cause eye strain.
• If 3D images often appear in dou ble or i f you ca nnot s ee
the images in 3D, stop viewing.
Continuous viewing may cause eye strain.
• Due to the possible impact on vision development,
viewers of 3D video images should be age 6 or above.
Children and teenagers may be more susceptible to health
issues associated with viewing in 3D and should be closely
supervised to avoid prolonged viewing without rest.
• Watching TV while sitting too close to the screen for an
extended period of time may cause eye strain.
The ideal viewing distance should be at least three times
the screen height.
Notes on IR communication
• Do not block the IR sensor for 3D glasses on the TV by
placing objects in front of it.
• Do not cover the IR sensor on the 3D glasses with
stickers or labels.
• Keep the IR sensor on the 3D glasses clean.
• The use of 3D glasses could interfere with other IR
communication devices. Other IR communication
devices may cause the 3D glass es not to work correctly.
Use the TV and 3D glasses in a place where they will not
interfere with other devices or products.
Notes on watching the TV
• 3D effect and image quality may vary depending upon
content quality and display device capability/
functionality/settings.
• If you use any device, such as a mobile phone or mobile
wireless device, near the 3D glasses, the 3D glasses may
not work correctly.
• Use the product in the following temperature range;
otherwise, the quality of the 3D image or the reliability
of the product cannot be guaranteed.
- 3D glasses: 0°C - 40°C (32°F - 104°F)
- TV: 0°C - 35°C (32°F - 95°F)
• If you use a fluorescent light, it may flicker depending
on the frequency of the light. In this case, reduce the
brightness of the fluorescent light, or us e another light.
(It is not recommended to watch the TV in a dark room,
especially for children.)
• Wear the 3D glasses properly, otherwise you may not
see the correct 3D image.
• When not viewing 3D images on this unit, take off the
3D glasses; otherwise, it may be difficult to see the
display on other products such as PC, digital clock or
calculator, etc.
About the connecting cable
• Use a high-speed and high-quality HDMI cable when
you connect a device such as 3D compatible BD player
or PC to the TV. When you use a standard HDMI cable,
3D images may not be shown.
If the 3D PIN number has been forgotten:
Use the Master PIN code of 1276, and then change to a
number of your choice. Select 3D PIN from the
PREFERENCES / 3D Setup menu to enter PIN.
6
INSTALLING YOUR TV
Please take note
The digital reception function of this television is only effective in the countries listed in the “Country” section of
the “SETUP” menu. Depending on country/area, some of this television's functions may not be available.
Reception of future additional or modified services can not be guaranteed with this television.
If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays,
video games, on-screen menus, etc. are left on the television screen for any length of time, they could become
conspicuous. It is always advisable to reduce both the brightness and contrast settings.
Very long, co ntinuous use of the 4:3 picture on a 16:9 screen may result in some re tention of th e image at the 4:3
outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of
other size modes (e.g.: Super Live) will prevent permanent retention.
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) Fire;
ii) Earthquake;
iii) Accidental damage;
iv) Intentional misuse of the product;
v) Use of the product in improper conditions;
vi) Loss and/or damage caused to the product whilst in the possession of a third party;
vii) Any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s
manual;
viii) Any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with
associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not
limited to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal
operation or misuse of the product.
English
7
INSTALLING YOUR TV
1
2
5
4
8
9
20
17
16
22
11
24
27
26
25
23
21
18
14
19
15
13
12
10
3
6
7
The remote control
English
Simple at-a-glance reference of your remote control.
16 To access the “TOSHIBA PLACES” Top Page
When network is not connected, an error message will be
displayed.
17 To access Media Player Menu
18 To call up text services
19 To access the analogue or digital Channel List
20 On-screen Menus
21 To display the digital on-screen Programme Guide
22 To page up, down, left or right
23 When using menus, the arrows move the cursor on the screen
up, down, left or right. Press OK to confirm your selection
24 To return to previous Menu
25 To exit menus
26 When in TV mode:
r Picture still
D Analogue time
display
When using Programme
Guide:
Z –24 hours
z +24 hours
CC –1 page
cc +1 page
27 Colour buttons: Text and interactive service control buttons
When in Text mode:
A To reveal concealed
text
B To hold a wanted
page
C To enlarge text
display size
D To temporarily
erase the text
screen
During Playback:
c
To PLAY
v To STOP
W/w To PAUSE/STEP
Z To SKIP-BACK
CC To REWIND
cc To FAST FORWARD
z To SKIP-FORWARD
1 For On/Standby mode
2 To select external input sources
3 To select TV Mode
4 To switch between 2D and 3D modes
5 Widescreen viewing
s Stereo/bilingual transmissions
6
7 Digital Subtitles
8 Number buttons
9 Switch the Audio Description On/Off
10 To return to previous channel
11 To alter the TV volume
12 To display on-screen information
To access the index page in Text mode
13 To mute the TV sound
14 To access Quick Menu
15 To change programme positions
To change TEXT pages
Inserting batteries and effective range
Remove the back cover to
reveal the battery
compartment and make sure
the batteries are inserted the
proper way. Suitable battery
types for this remote are AA,
IEC R6 1.5V.
Do not combine a used, old
battery types. Remove dead batteries immediately to preven t
acid from leaking into the battery compartment. Dispose of
them in accordance with instructions on page 67 of this
manual.
Warning: Batteries must not be exposed to excessive heat
such as sunshine, fire or the like.
The performance of the remote control will deteriorate
beyond a distance of five metres or outside an angle of 30
degrees from the centre of the television. If the operating
range becomes reduced, the batteries may need replacing.
battery with a new one or mix
8
CONNECTING YOUR TV
LAN port
SCART (EXT 1)
DIGITAL AUDIO OUT PUT
(OPTICAL)
HDMI 4 INPUT
HEADPHONE jack
HDMI 1/2/3 INPUTS
COMPONENT VIDEO/AUDIO
VIDEO/AUDIO INPUT (EXT 2)
RGB/PC INPUT
Media Recorder
Aerial Cable
Power cord
ILLUSTRATION SHOWS 40TL868.
Satellite dish
“F-type”
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch,
remove the mains plug from the wall socket.
English
Aerial cables: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the aerial to the socket on the rear of the television.
If you use a decoder and/or a media recorder, it is essential
that the aerial cable is connected through the decoder and/o r
through the media recorder to the television.
Satellite cable: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the LNB from the satellite dish to the SATELLITE
ANTENNA socket on the TV. You can receive TV, radio,
interactive TV, and HD TV with clear reception.
SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the media recorder IN/OUT socket to the television.
Connect the decoder TV socket to the television.
Before running Auto Tuning, put your decoder and media
recorder to Standby.
The phono sockets alongside the COMPONENT VIDEO
INPUT sockets will accept L and R audio signals.
When connecting the VIDEO/AUDIO sources, connect those
cables to Y/L/R sockets.
The Digital Audio Output socket enables the connection of a
suitable surround sound system.
NOTE: This output is always active.
HDMI® (High-Definition Multimedia Interface) is for use with a
DVD decoder or electrical equipment with digital audio and
video output. For acceptable video or PC signal formats
through the HDMI terminals, see page 69.
NOTE: Although this television is able to connect to HDMI
equipment, it is possible that some equipment may not
operate correctly.
LAN port is used to connect the TV to your home network.
This TV can play digital content stored on a DLNA CERTIFIED™
product with server function.
A wide variety of external equipment can be connected to
the back of the television; therefore, the relevant owner’s
manuals for all additional equipment must be referred to
for exact instructions.
If the television automatically switches over to monitor
external equipment, return to normal television by pressing
the desired programme position button. To recall external
equipment, press
EXT 2, HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC or ATV.
When the external input mode is s elected while viewing DTV
mode, the SCART socket does not output video/audio signals.
9
p / o to select between DTV, EXT 1,
CONNECTING YOUR TV
Connecting an HDMI® device
English
The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI
source device.
Th is in put is d esi gned to a cce pt H DCP ( Hig h-B and widt h Di git al-C ont ent Pro tect ion ) pr ogr amme mat eri al i n dig ita l fo rm f rom E IA/
CEA-861-D–compliant consumer electronic devices (such as a set-top box or DVD player with HDMI output). For acceptable video
signal formats, see page 69.
NOTE: Supported Audio format: Linear PCM, Dolby Digital (AC-3), sampling rate 32/44.1/48kHz.
To connect an HDMI device
Connect an HDMI cable (type A connector) to the HDMI terminal.
For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo ( ).
• If your HDMI connection is capable of 1080p and/or your television is capable of refresh rates greater than 50Hz, you will need
a Category 2 cable. Conventional HDMI/DVI cable may not work properly with this model.
• HDMI cable transfers both video and audio. Separate analogue audio cables are not required (see illustration).
the back of your television
HDMI device
To view the HDMI device video, press the
HDMI cable
o button to select HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.
10
CONNECTING YOUR TV
English
Connecting a computer
With either an RGB/PC or an HDMI connection, you
can watch your computer’s display on the
television.
To connect a PC to the RGB/PC terminal
When connecting a PC to the RGB/PC terminal on the
television, use an analogue RGB (15-pin) computer cable.
the back of your television
Mini D-sub
15 pin connector
Computer
RGB PC cable (not
supplied)
Conversion adaptor
if required
(not supplied)
To use a PC, set the monitor output resolution on the PC
before connecting it to the television. For acceptable PC
signal formats, see page 68.
To display the optimum picture, use the PC setting feature
(see page 58).
NOTE:
• Some PC models cannot be connected to this television.
• An adaptor is not needed for computers with a compatible
mini D-sub15-pin terminal.
• Depending on the DVD’s title and the specifications of the
PC on which you are playing the DVD-Video, some scenes
may be skipped or you may not be able to pause during
multi-angle scenes.
• A ban d m ay a ppe ar at t he e dg es o f th e s cre en o r p art s of th e
picture may be obscured. This is due to scaling of the
picture by the set, it is not a malfunction.
• When PC input mode is selected, some of the television’s
features will be unavailable e.g. Colour System in the
SETUP menu.
• Some PC models may output unique signals that the
television may be unable to detect (see page 68).
• If connecting a certain PC model with a unique PC signal,
the PC signal may not be detected correctly.
To connect a PC to the HDMI terminal
When connecting a PC to the HDMI terminal on th e television,
use an HDMI-to-DVI adaptor cable.
If connecting a PC with an HDMI terminal, use an HDMI cable
(type A connector).
the back of your television
Computer
HDMI-to-DVI
adaptor cable
For acceptable PC and video signal formats, see page 69.
NOTE:
• The edges of the images may be hidden.
• If connecting a certain PC model with a unique PC signal,
the PC signal may not be detected correctly.
11
CONNECTING YOUR TV
Modem (if available)
Server PC
Router with Hub
the back of your television
Cable or Phone jack
[1] [2]
[2]
[3][2]
Access point (AP)
Wireless LAN router
Modem
TOSHIBA Dual
Band WLAN
adaptor
the back of your television
Computer
Connecting a home network
English
The LAN port allows your Toshiba TV to connect to
your home network. You can use this revolutionary
home entertainment networking system to access
photo, video and audio files that are stored on a
DL NA CER TIF IED ™ s erv er a nd pla y/d isp la y th em o n
your TV.
NOTE:
• If you connect to a shared network outside your home, it is
advisable to use a router. Always use DLNA CERTIFIED™
products in private network environments. Con nect this TV
to the same router as other DLNA CERTIFIED™ products
(server).
• If you use a hub or switch to connect the TV to your home
network, you may not be able to use the automatic setup
and will have to manually set up the network address. See
page 39.
• If you use a router with built-in DHCP functionality, use the
automatic setup. Manual setup may not work.
• If you connect the TV and PC directly, use a crossover LAN
cable.
To connect the TV to a home network -
Wired
To connect the TV to a home network with an internet connection - Wireless
Please refer to “Wireless Setup” section on page 37.
How to use this Dual Band Wireless LAN Adaptor
• If this device is going to be operated in the frequency ran ge
of 5.15 GHz to 5.35 GHz, it is restricted to indoor use.
• If this device is going to be operated for 802.11 b/g/n
function in the frequency range of 2.454 GHz to 2.4835 GHz
in France, it is restricted to indoor use.
• A general authorization is required for using this device
outdoors or in public places in Italy.
• This device is NOT ALLOWED to be used in the geographical
area wit hin a radius of 20km from the cen tre of Ny-Alesu nd
in Norway.
[1] Coaxial or telephone cable (depending on your modem type)
[2] Standard LAN cable
[3] Do NOT connect a phone jack directly to the TV’s LAN port.
12
CONNECTING YOUR TV
p / o
ILLUSTRATION SHOWS 40TL868.
COMMON INTERFACE
The Common Interface is for a Conditional Access
Module (CAM).
Contact a service provider.
The software updating of CI Plus CAM may be
automatically executed. At this time, your
Recording/Reminder programming will be canceled.
Ambient
Light Sensor
RED LED – Standby
GREEN LED – Power on
ORANGE LED – Programme
timer set (digital only)
USB 1 port
Media Player
USB 2 port
Media Player/Wireless LAN adaptor ready for a home
network
Control panel
3D IR
Controls and input connections
A wide variety of external equipment can be connected to the input sockets on the side of the television.
While all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used for some functions.
English
Switching on
If the RED LED is not lit, check that the mains plug is
connected to the power supply and press
control; it may take a few moments. The GREEN LED will be lit.
To put the television into Standby, press
control. To view the television, press
take a few seconds to appear.
For energy saving:
We recommend that you use the television with the factory
settings. The factory settings are for energy saving.
Unplugging the mains plug will cut energy use to zero for
all televisions. This is recommended when the television is
not being used for a long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy use.
Energy efficiency cuts energy consumption and thus saves
money by reducing electricity bills.
NOTE: Putting the television into standby mode will reduce
energy consumption, but will still draw some power.
Press MENU on the remote control to display the menu.
The menu appears as a list of five topics. As each symbol is
selected by pressing
respective options will appear below.
NOTE: The same menu is displayed in DTV (Digital TV) and
ATV (Analogue TV) modes; however, where some items are
not available in a mode, they will appear grayed out.
Using the menu system
C or c on the remote control, its
1 on the remote
1 again. The picture may
1 on the remote
To use the option, press
move up and down and press
setting.
B and b on the remote control to
C or c to select your desired
Using the TV controls and connections
• To turn on or off the TV, press
• To alter the volume, press + or – .
+ and – buttons operate as volume up/down as default.
• To alter the programme position, press
u
or U.
press
• To select an external input, press and hold
Inputs window appears, and then press
appropriate input source.
The Media Player feature provides access to photo, movie and
music files stored on a USB storage device that is connected
via the USB 1 or USB 2 port or on a network device.
NOTE: The USB socket has limited functionality and Toshiba
can take no responsibility for damage to other connected
equipment.
The USB 2 socket has to be used with the “TOSHIBA Dual Band
WLAN Adaptor WLM-20U2” in order to access a wireless
network.
You must use the TOSHIBA Wireless LAN device to ensure
correct operation of this feature. This feature is available only
when the “TOSHIBA Dual Band WLAN Adaptor“ is used.
Please always refer to the owner’s manual of the equipment to be
connected for full details.
NOTE: Interactive video games that involve shooting a “gun”
at an on-screen target may not work with this TV.
13
!.
p / o once and
p / o until the
u
or U to select the
SETTING UP YOUR TV
Quick Setup
Country
Germany
Primary Subtitle Language
Germany
English
English
English
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
AutoView
No
AutoView mode automatically adjusts picture settings
to suit ambient light conditions.
Do you wish to enable AutoView mode?
Ant/Cable/Satellite
Satellite
Cable
Next
Antenna
Auto Tuning
Progress Found
ATV Tune Waiting...
Channel: C7
DTV Tune 3% 2
Startup Application
English
Before switching on the TV, make sure your
decoder/media recorder, if applicable, is in
standby. To set up the television, use the buttons
on the remote control as detailed on page 8.
Quick Setup
a Press the 1 button. The Menu Language screen will
appear. This screen will appear the first time that the
television is switched on and each time Reset TV is
selected.
b Press B b C c to select the menu language and
press OK.
c Highlight Country and press C or c to select. The
television is now set to tune the stations for your
country.
NOTE:
• The following display menus will differ slightly
according to the country you selected.
• If there is not a country that you want to select in the
list, select Others.
g Press OK. If the Ant/Cable/Satellite screen appears,
press
B or b to select Antenna, Cable or Satellite
and press OK to check ( ).
If DVB-C is not supported in your area, Cable will not
be displayed.
• When you select Antenna or Cable, follow steps 8
to 11.
• When you select Satellite, skip to step 12.
• When you select Antenna (or Cable) and Satellite,
the Satellite Settings startup screen will appear
automatically after completing the Antenna (or
Cable) scan and pressing OK.
h Select Next and press OK. The Auto Tuning start up
screen will appear with the option to select between
DTV and ATV, DTV or ATV if available. Use
select the appropriate mode.
C or c to
i Press B or b to highlight Start Scan and press OK.
The television will start to search for available DTV
and/or ATV channels. The progress bar will indicate
the scan status.
You must allow the television to complete the
search.
d Press OK, and the Location screen will appear.
Location
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.
Home
e Press C or c to select Home or Store. For normal
home use, select Home.
f Press OK, and the AutoView screen will appear. Press
C or c to select Yes or No.
When the search is complete, the television will
automatically select channel one.
The Auto Tuning screen will display the total number
of services found.
NOTE: If there are multiple channels with the same
channel number, a confirmation window will appear.
C or c to select the one you prefer.
Press
j Press C or c to view the DTV (digital channel) or ATV
(analogue channel) lists.
14
k Press B or b to move through the list to select a
SatelliteNo. Dish LNB
ASTRA 19.2˚E
Satellite Settings
1
4
3
2
11
Transponder : 1/83 (10743 MHz)
Dish Type : Fixed
Lower LOF (MHz) : 9600
Upper LOF (MHz) : 10600
Switch Type
None
LNB Power
On
Done
Positioning
Signal Level 30%
Go to Stored Position
Store Position
Transponder
1/83 (10743 MHz H)
Positioning
WE
Go to 0
Satellite : ASTRA 19.2°E
Step Size
1
PLEASE NOTE
channel and press OK to view.
In ATV mode, some areas may receive duplicate
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using ATV Manual Tuning.
REMEMBER: Press TV at any time to select between
ATV and DTV modes.
NOTE: The time will be set automatically by
transmission but can be advanced or decreased by
using Local Time Setting in the DTV Settings screen.
l Select Next and press OK. The Satellite Settings
screen will appear. From this window, you can add the
satellites that you wish to tune and configure detailed
settings for each one individually. See “Satellite
Settings” on page 16.
SETTING UP YOUR TV
If your satellite dish is not movable, the Positioning
screen will not appear.
Adjust the dish position manually for the maximum
Signal Level strength.
Highlight Done and press OK.
n If the reception testing completes successfully, the
Auto Tuning startup screen will display.
Auto Tuning - Satellite
Satellite
Scan Option
Start Scan
ASTRA(19.2°E)
Free to Air
You can select Scan Option from Free to Air and All.
o Press B or b to highlight Start Scan and press OK.
The television will start to search for available DVB-S
channels. The progress bar will indicate the scan
status.
When the search is complete, the Auto Tuning results
screen will display the total number of services found.
p Use B or b to move through the list to select a
channel and press OK to view.
English
Highlight Done and press OK.
m If your satellite dish is movable, the following
Positioning screen will appear.
Press
B or b to highlight Positioning and press C or
c to find the dish position with the strongest signal
level.
Press
B or b to highlight Store Position and press
OK to store the dish position. Repeat steps 12 and 13
for the next satellite as necessary.
The Quick Setup menu can also be accessed at any
time from the SETUP menu.
Ant/Cable/Satellite (if available)
From this menu, you can set the RF input configuration.
a Press MENU / C c to highlight SETUP icon.
b Press b to select Ant/Cable/Satellite and press C or
c to select Antenna, Cable or Satellite.
NOTE: When you attempt to change the Ant/Cable/
Satellite setting, a warning message will appear
followed by PIN entry (if PIN has been set) and a
prompt for Auto Tuning.
15
SETTING UP YOUR TV
Auto Tuning
DTV and ATVTuning Mode
DTV
OthersOperator Selection
Quick ScanScan Type
AutoStart Frequency
AutoEnd Frequency
AutoModulation
AutoSymbol Rate
AutoNetwork ID
Start Scan
SatelliteNo. Dish LNB
ASTRA 19.2˚E
Satellite Settings
1
4
3
2
11
Transponder : 1/83 (10743 MHz)
Dish Type : Fixed
Lower LOF (MHz) : 9600
Upper LOF (MHz) : 10600
Switch Type
None
LNB Power
On
Done
c When Ant/Cable/Satellite is set to Cable, the
English
following setting options will be provided in the Auto
Tuning screen.
Press
B or b to select an item and press C or c to
select your desired option.
With the exception of DTV Scan Type and DTV Modulation
items, all of the following items will have 2 operating modes.
The first is Auto where the values for each item are preset by
the system. The second is an Input mode where you will be
able to enter a single value in place of the pre-set value. If no
channel is currently tuned and the Input state is chosen, a
system default value will be shown. However, if a channel is
currently tuned when the item is accessed, the value of the
current channel will be displayed.
Operator Selection:
You can choose the Cable operator depending on the
Country you set.
DTV Scan Type:
This item determines whether a Quick Scan or a Full Scan will
be executed.
The Quick Scan is a simplified version of the Full Scan that is
designed to complete in less time.
DTV Start Frequency:
This sets the frequency from which the scan will begin.
DTV End Frequency:
This sets the frequency at which the scan will end.
DTV Modulation:
You can choose from five QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
DTV Network ID:
This is the Network ID to be utilized for the scan. This item is
grayed out when DTV Scan Type is set to “Full Scan”.
Satellite Settings
From the System Setup menu, you can add the satellites that you
wish to tune and configure detailed settings for each one
individually.
To add a satellite:
a Press MENU / C c to highlight SETUP icon.
b Press b to select Satellite Settings and press OK.
c Press b to highlight a new line to add an another
satellite and press OK.
d Press b until the required satellite is displayed and
press OK.
To delete a satellite:
a In the Satellite Settings menu, press B or b to select
the satellite you want to delete.
b Press the RED button. A confirmation window will
appear.
c Press C or c to select Yes and press OK.
NOTE: It is not possible to delete position No.1.
16
To edit the satellite settings:
ASTRA 19.2˚E
111
Transponder Settings
1 10743 H
Frequency Polarisation Symbol Rate S/S2
7 10861
8 10876
2 10773
3 10788
4 10817
5 10832
6 10847
H
V
H
V
V
H
V
22000
22000
22000
22000
22000
22000
22000
22000
S
S
S
S
S
S
S
S
Transponder Settings
76 12640 V
Frequency Polarisation Symbol Rate S/S2
82 12728
83
77 12662
78 12669
79 12692
80 12699
81 12721
V
H
V
H
V
H
22000
22000
22000
22000
22000
22000
22000
S
S
S
S
S
S
S
83 0 H0S
83 12731 H 22000 S2
a In the Satellite Settings menu, press B to highlight
Switch Type.
SETTING UP YOUR TV
English
To delete a transponder:
a In the Transponder Settings menu, press B or b to
highlight the line you want to delete.
b Press C or c to select None, ToneBurst, DiSEqC
2way or DiSEqC 4way as your satellite switch type.
c Press b to highlight LNB Power and press C or c to
select On or Off.
To add a transponder:
a In the Satellite Settings menu, press B or b to
highlight the line you want to edit and press OK.
b Press the GREEN button. The Transponder Settings
screen will appear.
c Press B to highlight a new line.
b Press the RED button.
To edit the Transponder Settings:
a In the Transponder Settings menu, press B or b to
highlight the line you want to edit and press OK.
b Press C or c to select Frequency, Polarisation,
Symbol Rate or S/S2, and set the item using the
number buttons if necessary.
c Press OK to save your settings.
d Repeat steps 1 through 3 for other lines.
e Press the BLUE button to finish editing and return to
Satellite Settings.
Press the GREEN but ton to c ancel any edi ts tha t were
made.
Press the YELLOW button to reset all transponder
settings to their initial default settings.
To select the Dish Type:
a In the Satellite Settings menu, press B or b to select
the required satellite line and press OK.
b Press C or c to highlight Dish and press the GREEN
button.
Dish Settings
Dish : 1
Dish Type
Fixed
d
Press OK.
e
Edit each parameter as required and press OK.
c Press C or c to select Dish Type. You can select
Movable or Fixed as the Dish Type.
17
SETTING UP YOUR TV
LNB Settings
Lower LOF
9750
LNB : 1
Upper LOF
10600
Auto Tuning
Previous settings will be lost! Press EXIT for no
change.
AllSatellite
Free to AirSearch Option
Start Scan
To select the LNB Settings:
English
a In the Satellite Settings menu, press B or b to select
the required satellite line and press OK.
b Press C or c to highlight LNB and press the GREEN
button.
c Press B or b to select Lower LOF or Upper LOF and
input the appropriate frequencies.
Auto Tuning
NOTE: As new services are broadcast, it will be necessary to
re-tune the television in order to view them.
Auto Tuning will completely re-tune the television and can be
used to update the channel list. It is recommended that Auto
Tuning is run periodically to ensure that all new services are
added. All current channels and settings, i.e. locked channels,
will be lost.
a Press MENU / C c to highlight SETUP icon.
b Press b to select Auto Tuning and press OK.
c For DTV/ATV Tuning:
A screen will appear warning that previous
programmes and settings will be deleted.
Auto Tuning
Previous settings will be lost!
Press EXIT for no change.
DTV and ATVTuning Mode
Start Scan
Press
C or c to select DTV and ATV, DTV or ATV, if
available, then highlight Start Scan and press OK to
continue with the Auto Tuning.
NOTE: If you have selected “Others” for the Country
field in the SETUP menu, and selected a tuning mode
other than “DTV” , choose the optimum ATV
broadcasting system (B/G, I, D/K or L).
The television will start to search for all available DTV
and/or ATV services.
You must allow the television to complete the
search.
When the search is complete, the Auto Tuning screen
will display the services found.
For Satellite Tuning:
A screen will appear warning that previous programmes
and settings will be deleted.
SETUP
Menu Language English
Country
Ant/Cable/Satellite
Satellite Settings
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
Germany
Press B or b to highlight Satellite and press C or c to
select the desired satellite (No.1 Sat ~ No.4 Sat or
All).
You can select Free to Air or All as the Search Option.
Highlight Start Scan and press OK to continue with
the Auto Tuning.
When the search is complete, the Auto Tuning screen
will display the services found.
d Press B or b to move through the list to select a
channel and press OK to view.
18
SETTING UP YOUR TV
ATV Manual Tuning
System
1 A C 2 0 V C R
I
123 4 65 7 8 9
SETUP
Menu Language English
Country
Ant/Cable/Satellite
Satellite Settings
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
Auto Tuning
Germany
Pos. Channel Station
ATV Manual Tuning
1
2
3
4
6
7
8
C2
C7
S10
S40
C22
5
C25
C28
C30
ATV Manual Tuning
System
1 A C 2 0
I
ATV Manual Tuning
Search
1 C 2 0 IA
English
ATV Manual Tuning
Tuning
The television can be tuned-in manually using ATV Manual
Tuning. For example, you might use the feature if the television
cannot be connected to a media recorder/decoder with a SCART
lead or when you want to tune-in a station on another System.
C and c to move across the screen and select any of the
Use
ATV Manual Tuning options. Then use
settings.
1 Position
The number to be pressed on the remote control to tune
the channel.
2 System
Specific to certain areas.
3 Colour System
Factory set to Auto, should only be changed if problems
are experienced, i.e. NTSC input from external source.
4 Skip
Set Skip to On (
8) or Off (() for the selected channel.
See page 20.
5 Signal Class
The channel classification.
6 Channel
The channel number on which a station is being
broadcast.
7 Search
Search up and down for a signal.
8 Manual Fine Tuning
Only used if interference/weak signal is experienced. See
page 63.
9 Station
Station identification. Use the
enter up to seven characters.
To allocate a position on the television for a decoder and
media recorder: turn the decoder on, insert a pre-recorded
film in the media recorder, press PLAY and manually tune.
B or b to adjust the
B b and C c buttons to
a In the SETUP menu, press b to select ATV Manual
Tuning and press OK.
b Use B or b to select the desired position. We suggest
Pos. 0 for a media recorder.
Different Channel numbers may be displayed.
c Press OK to select. If the channel chosen for the media
recorder is set to skip, Skip should be removed before
storing.
d Press c to select System and press B or b to change
if required.
e Then press c to select Search.
f Press B or b to begin the search. The search symbol
will flash.
19
SETTING UP YOUR TV
PLEASE NOTE
ATV Manual Tuning
Station
1 A C 2 0 V C R I
Pos. Channel Station
ATV Manual Tuning
1
2
3
4
6
7
8
C2
C7
S10
S40 ABC1
ABC1C22
5
C25
C28
C30
ATV Manual Tuning
Skip: On
1 A C 2 0 I
g Each signal will show on the television. If it is not your
English
media recorder, press
search.
B or b again to restart the
h When your media rec order si gnal is fo und, pres s c to
move along to Station. Use
the required characters, e.g. VCR.
B, b, C and c to put in
i Press OK to save.
j Repeat for each position you want to tune, or press
BACK to return to the list of channels and select the
next number to tune.
k Press EXIT when you have finished.
This television has direct channel entry if the
channel numbers are known.
Select the ATV Manual Tuning screen in Step 3.
Enter the Position number, the System, then C for
standard (terrestrial) channels or S for cable
channels and the Channel number. Press OK to
save.
Skip
To prevent certain channels from being viewed, positions can be
skipped.
a Select ATV Manual Tuning from the SETUP menu.
b Press B or b to highlight the position to be skipped
and press OK to select.
d Use B or b to turn Skip on.
Press OK.
8 on the screen indicates a skipped position.
e Press BACK and repeat from Step 2 or press EXIT.
Each position has to be individually selected. To turn
Skip off, repeat the procedure for each position.
Skipped positions cannot be selected by P
or by the controls on the television but can still be
accessed by the number buttons on the remote
control.
U and Pu
Sorting positions
Channels may be moved and saved to the position of your
choice.
a Select ATV Manual Tuning from the SETUP menu.
b With the list of channels showing, use B or b to
highlight the channel you want to move and press
ATV Manual Tuning
Pos. Channel Station
2
S10
3
C7
4
C40
5
C22
1
C2
6
C25
7
C28
8
C30
ABC1
ABC1
c Press B or b to move through the list to your
preferred position. As you do so, the other channels
will move to make room.
c.
c Press c to select Skip.
d Press C to save your move.
Repeat as necessary and press EXIT.
20
SETTING UP YOUR TV
DTV Manual Tuning - Antenna
WEAK
Signal Strength
Quality
Channel
GOOD
STRONGAVERAGE
13
Frequency
506.0MHz
Bandwidth
Start Scan
8MHz
Pos.New TypeName
ABC ONE
0 New Channels - Total 6
ABC TWO
ABC THREE
ABC NEWS 24
DTV Manual Tuning - Antenna
2
1
7
40
ABCi
51
DTV Manual Tuning - Satellite
WEAK
Signal Strength
Quality
Satellite
POOR
Start Scan
STRONGAVERAGE
ASTRA 28.2°E
Transponder
1/83
Frequency
10714 MHz
Symbol Rate
22000 KS/s
Polarisation
H
Search Option
Free to Air
English
DTV Manual Tuning
NOTE: The content of this menu varies depending on the DTV
input (Antenna, Cable, or Satellite) that is currently selected.
Manual Tuning
This feature is available for service engineers or can be used for
direct channel entry if the multiplex channel is known.
a Select DTV Manual Tuning from the SETUP menu
and press OK.
b Enter the multiplex number using the number
buttons or use
down.
c Highlight Start Scan and press OK. The television will
automatically search for that multiplex.
C or c to adjust the number up or
Manual Tuning for DVB-C
When Ant/Cable/Satellite is set to Cable, DTV Manual
Tuning items are as follows:
Frequency – input a specific frequency to be scanned
Modulation – choose from one of five QAM modulation
options
Symbol Rate – in put a sp ecifi c baud r ate (K S/s) to be use d for
the manual scan
Highlight Start Scan and press OK.
Manual Tuning for DVB-S
When Ant/Cable/Satellite is set to Satellite, DTV Manual
Tuning items are as follows:
Use
B or b to highlight an item (Satellite, Transponder,
Frequency, Symbol Rate, Polarisation or Search Option)
C or c to select the required option.
and press
Highlight Start Scan and press OK.
When the multiplex is found, any channels that are
not currently in the channel list will be added and the
channel information at the top of the screen will be
updated.
d Repeat as necessary. Press EXIT to finish.
21
SETTING UP YOUR TV
DTV Settings
Channels
Parental PIN Setup
Subtitle and Audio
Parental Control
Local Time Setting
Common Interface
Channels
Line No. 1/10
1 ABC ONE
2 ABC TWO
Pos. Name
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
822 AA
823 AC
ABC ONE
Pos.
----
Name
Your existing channel order will be lost.
Do you wish to continue?
Yes
DTV Settings
English
Channels (Antenna/Cable)
The channel order may be changed to suit your personal
preference.
a Select DTV Settings from the SETUP menu and press
OK.
b Select Channels and press OK.
c For y our c onv eni enc e, yo u ca n jum p to spe cifi c pl ace s
in the list by one of two methods.
Move — Press the GREEN button to activate the
Move feature. Press the
channel you wish to move and press OK to check.
If you wish to move multiple channels at once, select
another channel and check in the same way. Repeat
as necessary.
Once all desired channels have been checked, press
the
B or b buttons to place the focus at the position
to which you wish to move the channels. The
channels will be inserted above the highlighted
channel. Press the GREEN button to execute the
move.
Channels
Line No. 1/10
Pos. Name
1 ABC ONE
2 ABC TWO
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
822 AA
823 AC
B or b buttons to select the
Position No. Sort —Press the YELLOW button. A
confirmation window will appear. Press
select Yes and press OK.
C or c to
Line Number Jump —Use the number buttons
(0-9) to input the line number you want to select and
press OK.
Name Jump —Press CC or cc to jump to the
next station name with a different initial letter.
It is also possible to change the Position number of a
particular channel.
Renumber — Press the RED button to renumber
the highlighted channel. Edit the channel number
using the number buttons and press OK. If the
position number you input already exists, a
confirmation window will appear.
22
SETTING UP YOUR TV
Channels
Line No. 4/1200
Satellite
1 DDD 19.2°E
Pos. Station Satellite
822 AA
823 AC
2AB
3E
801 BBC
802 BB
803 BA
25.6°E
25.6°E
19.2°E
19.2°E
22.5°E
22.5°E
22.5°E
English
Channels (Satellite)
a Select DTV Settings from the SETUP menu and press
OK.
b Select Channels and press OK.
The satellite channel list will appear.
c For your convenience, you can edit and sort your
channel list.
Line Number Jump — Press the number buttons
(0-9) to input the line number you want to select and
press OK.
Station Letter Jump — Press CC or cc to jump
to the next station name with a different initial letter.
Satellite Jump —Press Z or z to jump to the
next channel on a different Satellite.
Renumber — Same as Antenna/Cable channels.
See page 22.
Location setting
You can select either Home or Store mode. Home is
recommended for normal home use. Select Store when using
the television for displaying in a shop, etc.
a Select Location from the SETUP menu.
b Press C or c to select Home or Store.
Analogue switch-off
This is a digital tel evisi on whic h is in tegrat ed to al low th e use
of both digital and analogue services. However, during the
lifetime of this set it is very likely that analogue services will
be switched off to allow for more new digital services.
This ‘switch-off’ will happen in a number of phases, which will
be adve rti sed in y our a rea wel l in adva nce . It is r ecom men ded
that at each phase the television is re-tuned to ensure that
existing and new digital services can be viewed without
disruption.
Move — Same as Antenna/Cable channels. See
page 22.
Position No. Sort — Press the YELLOW button. A
confirmation window will appear. Press
select Yes and press OK.
C or c to
23
Loading...