Toshiba 32SL800A, 42SL800A, 46SL800A Owner's Manual

Owner's Record

Y

TV

o ow v

TOSHIB g

:

VX1A00211100

Integrated Digital LCD TV

O

WNER'S

M

ANUAL

© TOSHIBA CORPORATION, 2011
All Rights Reserved

TD/CA1

32SL800A
42SL800A
46SL800A

®

2

Welcome to Toshiba ������������������������������2
Important Safety Instructions ����������������2

Introduction ������������������������������������3

Important information ���������������������������6

Getting started �������������������������������� 8

Connecting an aerial ������������������������������8
Exploring your new TV �������������������������8
TV panel controls ����������������������������������9
Learning about the remote control ������11
Turning the TV on �������������������������������13
Tuning the TV for the first time ����������13
Using the Quick Menu ������������������������14
MENU structure ����������������������������������16
Programming channels into

the TV’s channel memory ����������������17
Watching TV programmes�������������������20

Using the TV’s features (General) �������� 22

Picture adjustment ������������������������������22
Sound adjustment �������������������������������27
Other feature settings���������������������������29
The timers �������������������������������������������30
Resetting the TV ����������������������������������31
Channel List ����������������������������������������31
Selecting the video input source ����������31
Setting the Colour System �������������������32
Setting the external input skip �������������32
Labeling video input sources ���������������32
Using REGZA-LINK ��������������������������33
Teletext ������������������������������������������������34
Subtitles �����������������������������������������������36
Subtitle and Audio �������������������������������36

Other Digital TV features and settings ��� 37

Using the EPG
(Electronic Programme Guide) ��������37

Digital settings - Channel Options ������38
Digital settings - PIN Setting���������������38
Using the System Information �������������39
Local Time Settings �����������������������������39
Performing a Software Upgrade ����������39
Viewing the Software Licences �����������40
Setting the Digital Audio ���������������������40

Connecting your TV ������������������������� 41

Back connections ���������������������������������41
Side connections ����������������������������������42

Connecting HDMI and DVI devices ���42
Selecting the PC/HDMI 3 audio mode

���44
Setting the HDMI 3 audio mode ���������44
Connecting a computer (PC) ���������������45
Using the PC Settings ��������������������������46
REGZA-LINK connection ������������������47
Using Personal TV Mode ��������������������48
Connecting a home network ����������������48
Using your home network �������������������49
Setting up the Network ������������������������50
Network Connection Test ��������������������54
Setting the Network Lock��������������������54
Using the software keyboard ���������������54
Setting Network Device setup �������������54
Using the Media Player �����������������������58
Using the Photo Frame feature ������������64

Reference section �������������������������� 66

Troubleshooting �����������������������������������66
APPENDIX �����������������������������������������67
Specifications �������������������������������������72

Contents

Welcome to Toshiba

• Thank you for purchasing this Toshiba LCD Colour TV.

This manual will help you use the exciting features of
your new TV�

• Instructions in this manual are based on using the remote

control�

• Please read all safety and operating instructions in

this manual carefully, and keep this manual for future
reference�

Important Safety Instructions

Be sure to observe the following instructions and
precautions to ensure safe use of this TV�

Installation

1)

WARNING: To prevent injury, this apparatus

must be securely attached to the floor/wall in
accordance with the installation instructions.
Install the TV in a horizontal, stable
location.

3

Introduction

Attach the TV to the stand with the

mounting screw provided, or secure the TV
to the level surface using the strap if fitted,
or to a wall using a sturdy tie to the clip
provided.

• IftheTVisnotinstalledsecurely,itmaylean
orfalloverandcauseaninjury.

• Topreventinjury,usetheexclusiveoptional
standorwall-hangingbrackettoinstall
thisTVontheoororwallsecurelyin
accordancewithaqualiedtechnician.

Sturdy tie (as short as possible)

Stand clips

Fixing strap

Screw
(supplied)

Fixing strap

Clip
(supplied)

When using a Wall Bracket

Alwaysusethescrewsrecommendedbythe
wallmountmanufacturer.

Remove four screws.
(Do not reuse these screws for
attaching a wall bracket.)

2) Never place the TV in an unstabilized
location such as on a shaky table, incline
or location subject to vibration.

• Onlyusecabinetsorstandsrecommended

bytheTVmanufacturer.

• Onlyusefurniturethatcansafelysupport

theTV.

• EnsurethattheTVisnothangingoverthe

edgeofthesupportingfurniture.

• NeverplacetheTVontallfurniture(for

example,cupboardsorbookcases)without
anchoringboththefurnitureandtheTVtoa
suitablesupport.

• NeverstandtheTVonclothorother
materialplacedbetweentheTVand
supportingfurniture.

TheTVmaydroporfalloff,whichmaycause
aninjuryordamage.

3) Never stand or climb on the TV.

• Educatechildrenaboutthedangersof
climbingonfurnituretoreachtheTVorits
controls.

Beespeciallycarefulinhouseholdswith
childrentopreventthemthroughclimbingon
topoftheTV.Itmaymove,fallover,break,
becomedamagedorcauseaninjury.

4) Always connect the power plug to an
appropriate electrical outlet equipped with
110-240V, AC 50/60Hz.

NeverusetheTVoutsidethespeciedvoltage
range.Itmaycauseareoranelectricshock.

Check!

Ex. 110-240V AC, 50/60Hz

5) Never insert or remove the power plug with
wet hands.

Thismaycauseanelectricshock.

4

6) Never block or cover the slots and
openings in the cabinet.

• NeverplacetheTVsothatitisfacing

upwardoronitsside.

• NeverplacetheTVinacloset,bookcaseor

othersimilarareawheretheventilationis
poor.

• Neverdrapeanewspaper,tableclothor

curtainontheTV.

• WheninstallingtheTVagainstawall,

alwayskeeptheTVatleast10cmaway
fromthewall.

• NeverplacetheTVonasoftunstable

surface,suchasacarpet,oracushion.
TheinsideofthisTVwilloverheatifthe
ventilationholesarecovered,blockedor
sealed,whichmayresultinare.

7) Never place the TV near a heater or in
direct sunlight.

Thesurfaceofthecabinetorpowercordmay
meltandresultinareoranelectricshock.

8) Never place the TV in an area exposed
to high humidity levels, such as in a
bathroom or close to a humidifi er.

Thismaycauseareoranelectricshock.

9) Never place the TV next to a stove where it
will be exposed to oil, smoke, or steam, or
in a location where there is a large quantity
of dust.

Thismaycauseareoranelectricshock.

Introduction

10

) Precautions for moving the TV

• WhenmovingtheTV,besuretoremovethe
plugfromthewalloutletanddisconnectthe
aerialcableandaudio/videocables,any
steadytiesandmountingscrew.Areoran
electricshockmayresultifthepowercordis
damaged.

• WhencarryingtheTV,atleasttwopeople
areneeded.Besuretocarryitupright.

• NevercarrytheTVwiththescreenfacingup
ordown.

11)

Precautions for installing on outdoor aerial

Anoutsideaerialsystemshouldnotbe
locatedinthevicinityofoverheadpowerlines,
orotherelectriclightorpowercircuits.
Iftheaerialfallsdownordrops,itmaycause
aninjuryoranelectricshock.

Use

1) Never place hot objects or open fl ame
sources, such as lighted candles or
nightlights, on or close to the TV.

Hightemperaturescanmeltplasticandleadtores.

2) The apparatus shall not be exposed to
dripping or splashing and that no objects
fi lled with liquids, such as vases, shall be
placed on the apparatus.

5

Whenliquidsarespilledorsmallitemsare
droppedinsidetheTV,thismaycauseareor
anelectricshock.
IfsmallobjectsdropinsidetheTV,turnoffthe
TVandremovethepowerplugfromtheoutlet
immediatelyandcontactaservicetechnician.

3) Never insert objects (metal or paper)
or pour water inside the TV through
ventilation holes and other openings.

Theseitemsmaycauseareoranelectric
shock.Iftheseobjectsareinsertedinsidethe
TV,turnofftheTVandremovethepowerplug
fromtheoutletimmediatelyandcontacta
servicetechnician.Beespeciallycarefulthat
childrendonotinsertobjectsintheTV.

Clip

4) When the TV will not be used for a long
period of time, such as during vacation or
travel, remove the power plug from the wall
outlet for safety.

• TheTVisnotcompletelydisconnectedfrom

thepowersupplyline,asminutecurrentis
consumedevenwhenthe1Powerswitchis
turnedoff.

• TheMainsplugoranappliancecoupleris

usedasthedisconnectdevice,therefore
thedisconnectdeviceshallremainreadily
operable.

5) Never pull on the power cord when
removing the plug from the wall outlet.

Alwaysholdtheplugrmlywhenremoving
it.Ifthepowercordisyanked,thecordmay
becomedamagedandareoranelectric
shockmayoccur.

6) Never cut, break, modify, twist, bunch up or
bent the cord or apply excessive force or
tension to it.

Neverplaceheavyobjectsonthecord
orallowittooverheatasthismaycause
damage,areoranelectricshock.Contact
aservicetechnicianifthepowercordis
damaged.

7) If there is thunder or lightning, never touch
the aerial cable or other connected cables.

Youmaysufferanelectricshock.

Service

1) Never repair, modify or disassemble the TV
by yourself.

Itmaycauseareoranelectricshock.
Consultaservicetechnicianforinspectionandrepairs.

2) When a malfunction occurs, or if smoke or
an unusual odor comes from the TV, turn
off the TV and remove the power plug from
the outlet immediately.

Makesurethatthesmokeorsmellhas
stopped,thencontactaservicetechnician.
IftheTVisstillusedinthiscondition,itmay
causeareoranelectricshock.

Introduction

6

3) If the TV is dropped or the cabinet is
broken, turn off the TV and remove the
power plug from the outlet immediately.

IftheTVhaspowerinthiscondition,itmay
causeareoranelectricshock.Ifthecabinet
isbroken,becarefulwhenhandlingtheTVto
preventaninjury.
Contactaservicetechnicianforinspectionand
repair.

4) When the TV reaches the end of its useful
life, ask a qualified service technician to
properly dispose of the TV.

Cleaning

1) Remove the power plug before cleaning.

Neverusesolventssuchasbenzineorthinner
tocleantheTV.

• Thesesolventsmaydistortthecabinetor

damageitsnish.

• Ifrubberorvinylproductsremainincontact

withtheTVforalongtime,astainmay

result.
Ifthecabinetbecomesdirty,cleanitwitha
soft,drycloth.
WhencleaningthesurfaceoftheLCDdisplay,
wipethepanelsurfacegentlywithasoft,dry
cloth.

Introduction

2) Periodically disconnect the power plug from
the outlet and check it.
If dust has collected on the power plug
connectors, clean off the dust with a dry
cloth.

Thisdustmaycauseareduetoreduced
insulationontheplug.

Clean here

Important information

1) LCD screen

• IfyouhavetheLCDscreenfacingtothesun,

theLCDscreenwillbedamaged.Beawareof
locatingtheTVclosetoawindoworoutdoors.

•NeverpresstheLCDscreenstronglyor

scratchit,andneverputanythingonit.These
actionswilldamagetheLCDscreen.

2) Cabinet and LCD screen

Neversprayvolatilecompoundssuchas
insecticideonthecabinetandLCDscreen.
Thismaycauseadiscolourationordamagethe
cabinetandLCDscreen.

3) Some pixels of the screen do not light up

TheLCDdisplaypanelismanufactured
usinganextremelyhighlevelofprecision
technology;however,sometimessomepixels
ofthescreenmaybemissingpictureelements
orhaveluminousspots.Thisisnotasignof
malfunction.

4) Interference

TheLCDdisplaymaycauseinterference
inimage,sound,etc.ofotherelectronic
equipmentthatreceiveselectromagneticwaves
(e.g.AMradiosandvideoequipment).

5) Using in low temperature areas

IfyouusetheTVintheroomof0°Corless,
thepicturebrightnessmayvaryuntiltheLCD
monitorwarmsup.
Thisisnotasignofmalfunction.

7

6) Afterimages

Ifastillpictureisdisplayed,anafterimagemay
remainonthescreen;however,itwilldisappear.
Thisisnotasignofmalfunction.

Exemptions

• Toshiba is not liable for any damage caused by res,

natural disaster (such as thunder, earthquake, etc�), acts
by third parties, accidents, owner’s misuse, or uses in
other improper conditions�

• Toshiba is not liable for incidental damages (such as
prot loss or interruption in business, modication or

erasure of record data, etc�) caused by use or inability to
use product�

• Toshiba is not liable for any damage caused by neglect

of the instructions described in the owner’s manual�

• Toshiba is not liable for any damage caused by misuse

or malfunction through simultaneous use of this product
and the connected equipment�

Trademark Information

• Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories�

• Audyssey EQ is based on the same core technology as

Audyssey MultEQ that is used for automatic correction
of room acoustics� Audyssey EQ uses time-domain

lters to correct problems that arise from speaker drivers

and enclosures and is calibrated to account for the
acoustical problems in a typical listening environment�

• Manufactured under license from Audyssey

Laboratories� U�S� and foreign patents pending�
Audyssey EQ is a registered trademark of Audyssey
Laboratories�

• HDMI, the HDMI logo, and High-Denition Multimedia

Interface are trademarks or registered traemarks of
HDMI Licensing LLC in the United Stats and other
countries�

• DVB is a registered trademark of Digital Video

Broadcasting Project�

• DivX

®

, DivX Certied®, DivX PlusTMHD and associated

logos are trademarks of DivX, Inc�, and it is used under
license�
Covered by one or more of the following U�S� Patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274

• INSTAPORT

™

and INSTAPORT logo are trademarks
of Silicon Image, Inc� in the United States and other
countries�

• DLNA

®

, the DLNA Logo and DLNA CERTIFIED™

are trademarks, service marks, or certication marks of

the Digital Living Network Alliance�

• YouTube and the YouTube Logo are trademarks of

Google Inc�

• This product contains NetFront Browser of ACCESS

CO�, LTD�
ACCESS, the ACCESS logo and NetFront are
trademarks or registered trademarks of ACCESS CO�,
LTD� in the United States, Japan and other countries�
© 2010 ACCESS CO�, LTD� All rights reserved�
This software is based in part on the work of the
Independent JPEG Group�

• This product contains Adobe

®

Flash® Player software
under license from Adobe Systems Incorporated�
Copyright © 1995-2009 Adobe Systems Incorporated�
All rights reserved� Adobe and Flash are trademarks of
Adobe Systems Incorporated�

• MPEG Layer-3 audio coding technology licensed from

Fraunhofer IIS and Thomson�

• THIS PRODUCT IS LICENSED UNDER THE

AVC PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NONCOMMERCIAL USE
OF A CONSUMER TO (i) ENCODE VIDEO IN
COMPLIANCE WITH THE AVC STANDARD (AVC
VIDEO) AND/OR (ii) DECODE AVC VIDEO THAT

WAS ENCODED BY A CONSUMER ENGAGED

IN A PERSONAL AND NONCOMMERCIAL

ACTIVITY AND/OR WAS OBTAINED FROM A

VIDEO PROVIDER LICENSED TO PROVIDE AVC
VIDEO� NO LICENSE IS GRANTED OR SHALL BE

IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION MAY BE OBTAINED FROM MPEG

LA, L�L�C�

SEE HTTP://WWW�MPEGLA�COM

• THIS PRODUCT IS LICENSED UNDER THE MPEG-

4 VISUAL PATENT PORTFOLIO LICENSE FOR
THE PERSONAL AND NON COMMERCIAL USE
OF A CONSUMER FOR (i) ENCODING VIDEO
IN COMPLIANCE WITH THE MPEG-4 VISUAL
STANDARD (MPEG-4 VIDEO) AND/OR (ii)
DECODING MPEG-4 VIDEO THAT WAS ENCODED

BY A CONSUMER ENGAGED IN A PERSONAL
AND NON COMMERCIAL ACTIVITY AND/OR

WAS OBTAINED FROM A VIDEO PROVIDER

LICENSED BY MPEG LA TO PROVIDE MPEG-4

VIDEO� NO LICENSE IS GRANTED OR SHALL BE

IMPLIED FOR ANY OTHER USE. ADDITIONAL

INFORMATION INCLUDING THAT RELATING TO
PROMOTIONAL, INTERNAL AND COMMERCIAL

USES AND LICENSING MAY BE OBTAINED

FROM MPEG LA, L� L� C�

SEE HTTP://WWW� MPEGLA� COM

Introduction

8

Getting started

Connecting an aerial

Optimum reception of colour requires a good signal and
will generally mean that an outdoor aerial must be used�
The exact type and positioning of the aerial will depend
upon your particular area�

Your Toshiba dealer or service personnel can best advise

you on which aerial to use in your area�
Before connecting the aerial cable, turn off all main power
switches�

IN

OUT

IN

OUT

VHF UHF

300 7 twin-lead feeder

757
aerial
terminal

Aerial adaptor

Aerial cable (757 coaxial)
(not supplied)

Outdoor aerial

Mixer

(not supplied)

(not supplied)

757 aerial
terminal

75 7 coaxial cable

Plug

Decoder

Media Recorder

Back of TV

Exploring your new TV

Installing the remote control batteries

Remove the battery cover�
Insert two R6 (AA) batteries matching the –/+ polarities of
the battery to the –/+ marks inside the battery compartment�

Cautions:

• Dispose of batteries in a designated disposal area.
Batteries must not be exposed to excessive heat
such as sunshine, fire or the like.

• Attention should be drawn to the environmental
aspects of battery disposal.

• Never mix battery types or combine used batteries
with new ones.

Notes:

•

If the remote control does not operate correctly, or
if the operating range becomes reduced, replace
both batteries with new ones.

•

If the batteries are dead or if you will not use the
remote control for a long time, remove the batteries
to prevent battery acid from leaking into the battery
compartment.

Effective range

within 5 m

9

Getting started

TV panel controls

• You can operate your TV using the Touch Keys on the front of the panel or the remote control. The back and side of the

panel provide the terminal connections to connect other equipment to your TV (- “Connecting your TV” pages 41 – 65)�

• For the use of each control, see the pages in brackets.

TV top view

You can swivel the TV screen.
Swivel angle: 15 degrees to left and right.

TV front view

7 6 5 4 3 2 1

Brightness sensor
(- page 24)

!

1 (power on/standby)

— Touch to turn the TV

on/ standby (

-

page 13)�

pBb

2 (Programme position)

— When no
menu is on-screen, these keys select the programme
position�(

-

pages 17, 20)�

U u

(menu up/down)

— When a TV menu is
on-screen, these keys function as up/down menu
navigation keys (- page 16)�

2

3

– / +

(volume)

— When no menu is on-screen,

these keys adjust the volume level�

I i

(menu left/right)

— When a TV menu is on­screen, these keys are used for left/right menu
navigation and to adjust settings (- page 16)�

MENU4

— Press to access the TV menu

(

-

page 16)�

BACK

— When a TV menu is on-screen, this button

will take you back to the previous menu�

o

5 (input source selection)

— When no menu is
on-screen, this button selects the input source
(

-

page 31)�

OK

— When a TV menu is on-screen, this button
will make a selection or take you to the next available
menu layer�

6 (programme timer LED)

— Programme timer

indicator (

-

page 30)�

!7

(power LED)

— Power indicator (

-

page 13)�

10

Getting started

USB Ports 1-2 8

— For use when inserting a USB

device (photo, movies, music) (

-

page 59)�

Note:

Port 2: When using TOSHIBA Dual Band WLAN

Adaptor

o

9 HDMI 1 (ARC) - 4 (input terminal)

— High-

Denition Multimedia Interface input receives digital

audio and uncompressed digital video from an HDMI
device (

-

page 43)�

o

HDMI 1 (ARC) (input terminal) only

—
For use when connecting to a HDMI audio system
(

-

page 43)

o

HDMI 3 (input terminal) only

— High-

Denition Multimedia Interface input receives digital

audio and uncompressed digital video from a DVI
device (

-

pages 43, 45)�

o

10 (3) (video 3 input terminal)

— Standard video

and standard stereo audio input (

-

page 42)�

D

11 (Headphone jack)

— For use with headphones

(- page 29)�

o

12 PC/HDMI 3 (AUDIO) (input terminal)

—
PC audio input terminal is shared with the HDMI
3 analogue audio input terminal, and its use can be

congured in the Preferences menu. (

-

pages 43, 45)

o

13 RGB/PC (input terminal)

— For use when

connecting a personal computer (PC) (

-

page 45)�

o

14 (2) (video 2 input terminals)

— High-

denition component video and standard stereo audio

inputs (

-

page 41)�

15 (1) (video 1 input terminal)

— Standard
(composite) video and standard (analogue) stereo
audio input (

-

page 41)�

Note:

Use for the Scart/Phono jacks adaptor
(supplied).

O

16 DIGITAL AUDIO (OPTICAL) (output

terminal)

— For use when connecting an amplier

with optical type digital audio input (

-

pages 41,

42)�

LAN port 17

— For use when connecting to Network

function (

-

page 49)�

A

18 (aerial input terminal)

— Aerial signal input

(

-

page 8)�

8

9

9

17

12

13

14

10

11

151618

TV back and left side view

Cable holder*

* You can use the cable

holder to hold the aerial
cable, video and audio
cables etc.

Never grasp the holder

when moving the TV.

11

Picture Mode

Picture Size

Imput source selection

Power on/Standby

Text and interactive control
buttons

(Four coloured buttons:

Red, Green, Yellow, Blue)

Teletext function:

Teletext on/Superimpose
Teletext/off

To reveal concealed text
To hold a specific page
To enlarge the teletext display

size
To select a page while viewing

a normal picture
To select the time display

- analogue -

Press to STOP
Press to PLAY
Press to PAUSE
Press to SKIP BACK
Press to REVERSE
Press to FORWARD
Press to SKIP FORWARD

Media Player function:

* For REGZA-LINK remote control functions, please refer to “Location of controls for REGZA-LINK mode” (- page 12).

Stereo/Bilingual selection

To select TV mode

Subtitle on/off

To return to the previous
programme

•

To display on-screen information

• Initial/index function for Teletext

This button turns the sound off/on

Position up/down

Teletext on/Superimpose
Teletext/off

To display the channel list

• To display digital on-screen

Programme Guide

• To menu up, down, left or right

• To exit menu

To access “TOSHIBA PLACES”
Top Page

To access Media Player Menu

These buttons adjust the
volume level

To access the Quick Menu

This button is not available
for this TV

Number buttons (0-9)

Picture still

• On-screen Menus

• To confirm your selection

• To page up, down, left or

right ( , , , )

•

To return to the previous menu

Getting started

Learning about the remote control

Location of controls

12

To select input from
external source

Picture size selection

To change volume of
AV amplifier

To operate menu

To select audio mode

To exit menu

To return to previous menu
accessed

Press to STOP
Press to PLAY
Press to PAUSE
Press to SKIP BACK
Press to REWIND
Press to FAST FORWARD
Press to SKIP FORWARD

Getting started

Note:

These functions are dependent on the connected device. Not all of the remote control buttons may be
available. Please refer to the owner’s manuals of the connected devices.

Location of controls for REGZA-LINK

13

Getting started

Turning the TV on

Switching on the TV

Connect the power cord to a wall outlet� The ! power
indicator light should be red (standby mode)�

1

Press 1 on the remote control or ! on the TV right

side panel� The ! power indicator lights in green�

Note:

If you watch black and white programmes when the

Colour System

mode is set to Auto, colour noise
may appear on the screen. In this case select the
appropriate

Colour System

(

-

page 17).

Switching off the TV

1

Press 1 on the remote control or ! on the TV front

panel to switch to the standby mode�

Notes:

• The TV is not fully disconnected from the main

supply, as minute current is consumed even when

!

is turned off. When the TV will not be used for
a long period of time, such as during vacation or
travel, remove the power plug from the wall outlet.

• If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the TV
automatically when power is applied again. If
power is going to be off for a long time and you are
going to be away from your TV, unplug the power
cord to prevent the TV from turning on in your
absence.

Tuning the TV for the first time

Before switching on the TV, put your decoder and media
recorder to standby, if they are connected, and ensure that
the aerial is connected� To setup the TV, use the buttons on
the remote control as detailed on page 11�

1

Press the 1 button� The

Menu Language

screen

will appear. This screen will appear the rst time that

the TV is switched on and each time “

Reset TV

” (-

page 31) is executed�

Menu Language

English

2

Press v or w to select the menu language

English

or

Français

�

3

Press OK, to display the

Primary/Secondary

Language

and

Primary/Secondary Audio

Language

item� Press s, r,v or w to set the

selectings as desired�

4

Press OK, to display the

Time Zone

menu and press

v

or w to select the item you want to set� (New
South Wales, Northern Territory, Queensland, South
Australia, Tasmania, Victoria, Western Australia or
Australian Capital Territory)

5

Press OK, to display the

Location

menu (- page

19)�

Press

v

or w to select

Home

or

Store

� For normal

home use, select

Home

�

Location

Home

To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.

Store mode:

• A conrmation menu will appear.

• AutoView menu is not available�

6

Press OK, to display the

TV Mounting

menu, press

v

or w to select

Stand

or

Wall

�

TV Mounting

Stand

If you are mounting the TV on a wall please select [Wall].
[Stand] is recommended for other uses.This setting may be
modified later under Sound Navigation in the SOUND menu.

7

Press OK, to display the

AutoView

menu
(- page 23)�
Press v or w to select

Yes

or No�

AutoView

No

AutoView mode automatically adjusts picture settings to
suit ambient light conditions.
Do you wish to enable AutoView mode?

8

Press OK to display the

Auto Tuning

startup screen�

Use v or w to select

DTV

and

ATV, DTV

or

ATV

�

Press s to select

Bandwidth

, press v or w to select

7MHz, 8MHz

or

7MHz and 8MHz

(- page 69)�

Then, press s to select

Start Scan

and press OK�

You must allow the TV to complete the search.

Auto Tuning

Progress Found

ATV Tune Waiting...

Channel: 10

DTV Tune 3% 2

When the search is complete, the TV will
automatically select position one�

The

Auto Tuning

results screen will display the

services that are found�

14

Getting started

Pos. NameType

DTV

DTV Services Found : 7 ATV Services Found : 12

ATV

Auto Tuning

1

6

9

10

11

12

21

9

Press v or w to view the

DTV

(digital channel) or

ATV

(analogue channel) lists�

Name

DTV

DTV Services Found : 7 ATV Services Found : 12

ATV

Auto Tuning

0

1

2

3

4

5

6

10

Select s or r to move through the list to select a

channel and press OK to view�

Note:

The

Quick Setup

menu can also be displayed at

any time from the

System Setup

menu.

Using the Quick Menu

Quick Menu

helps you access some options quickly, such

as

Picture Mode, Picture Size, More Information

,

Sleep Timer

etc�

Press

QUICK

to display the

Quick Menu

and use s or

r

to select the option�

Quick Menu

Picture Size

Personal Mode

Wide

00:00

TV Speakers

More Information

Channel Options

REGZA-LINK Device Control

Wireless Information

Sleep Timer

Speakers

Headphone Level

Standard

Picture Mode

30

Note:

Quick Menu

items are different depending on the

current mode.

Quick menu item example

Mode Quick menu item Description

When viewing a
TV programme
or pictures from
the external input

Picture Mode

-

page 23�

Picture Size

-

page 22�

Personal Mode

-

page 48�

More Information

-

page 20�

Channel Options

-

page 38�

Sleep Timer

-

page 30�
REGZA-LINK
Device Control

-

page 34�

Speakers

-

page 33�
Headphone Level

-

page 29�
Wireless Information

-

page 52�

When using EPG

Genre Colour

-

page 37�
EPG Update/Cancel

EPG Update

-

page 37�

When using
Media Player
(Photo Multi
View)

Sort

-

page 61�
Interval Time

-

page 60�
Repeat

-

page 60�

Shufe

-

page 60�
Device Information

-

page 61�
Wireless Information

-

page 52�

When using
Media Player
(Photo Single
View, Slide
Show)

Picture

-

page 24�
Picture Size

-

page 22�
Sound

-

page 27�
Personal Mode

-

page 48�
Interval Time

-

page 60�
Repeat

-

page 60�

Shufe

-

page 60�
Background Music

-

page 60�
Sleep Timer

-

page 30�
Wireless Information

-

page 52�

When using
Media Player
(Photo Play
DMR)

Picture

-

page 24�
Picture Size

-

page 22�
Personal Mode

-

page 48�
Sleep Timer

-

page 30�
Wireless Information

-

page 52�

When using
Media Player
(Movie List)

Sort

-

page 62�
Repeat

-

page 62�
Device Information

-

page 62�
Wireless Information

-

page 52�

When using
Media Player
(Movie Play)

Picture

-

page 24�
Picture Size

-

page 22�
Sound

-

page 27�
Personal Mode

-

page 48�
Repeat

-

page 62�
Sleep Timer

-

page 30�
Speakers

-

page 33�
Headphone Level

-

page 29�
Wireless Information

-

page 52�

15

Mode Quick menu item Description

When using
Media Player
(Movie Play
DMR)

Picture

-

page 24�

Picture Size

-

page 22�

Sound

-

page 27�

Personal Mode

-

page 48�

Sleep Timer

-

page 30�

Speakers

-

page 33�

Headphone Level

-

page 29�

Wireless Information

-

page 52�

When using
Media Player
(Music List)

Sound

-

page 27�

Personal Mode

-

page 48�

Sort

-

page 64�

Repeat

-

page 63�

Shufe

-

page 63�

Speakers

-

page 33�

Headphone Level

-

page 29�

Device Information

-

page 64�

Wireless Information

-

page 52�

When using
Media Player
(Music
Fullscreen Play)

Sound

-

page 27�

Personal Mode

-

page 48�

Repeat

-

page 63�

Shufe

-

page 63�

Sleep Timer

-

page 30�

Speakers

-

page 33�

Headphone Level

-

page 29�

Wireless Information

-

page 52�

When using
Media Player
(Music Play
DMR)

Sound

-

page 27�

Personal Mode

-

page 48�

Sleep Timer

-

page 30�

Speakers

-

page 33�

Headphone Level

-

page 29�

Wireless Information

-

page 52�

When using
Photo Frame

Picture

-

page 24�

Picture Size

-

page 22�

Personal Mode

-

page 48�

When using

YouTube

Picture

-

page 24�

Sound

-

page 27�

Personal Mode

-

page 48�

Sleep Timer

-

page 30�

Speakers

-

page 33�

Headphone Level

-

page 29�

Wireless Information

-

page 52�

Getting started

16

Getting started

MENU structure

To open the main menu (illustration below), press MENU on the remote control or on the TV control panel.

1st Layer 2nd Layer 3rd Layer

Press MENU. Press OK.Press

 or /. Press , ,  or .Press  or .

TV Programmes

Guide
Genre Search
Programme Timers

Jump to Programme Guide (EPG)
Jump to Genre Search
Jump to Programme Timers

Media Player

Photo
Movie
Music
Media Player Setup

Jump to Photo menu
Jump to Movie menu
Jump to Music menu
Media Player Setup Menu

Toshiba Places

Jump to Toshiba Places

Function

Photo Frame
On Timer
Sleep Timer

Jump to Photo Frame
On Timer Menu
Sleep Timer Menu

Setup

Picture
Sound
Preferences
System Setup

Picture Menu
Sound Menu
Preference Menu
System Setup Menu

TV ProgrammesSetup

Function Toshiba Places

Media Player

Genre Seach

Guide Programme Timers

MENU structure

17

Getting started

Programming channels into the
TV’s channel memory

Auto Tuning

Auto Tuning

will completely re-tune the TV and can be

used to update the channel list�

It is recommended that

Auto Tuning

is run periodically
to ensure that all new services are added� All current
channels and settings, e�g� favourites and locked channels,
will be lost�

Note:

As new services are broadcast, it will be necessary
to retune the TV in order to view them.

1

From the

System Setup

menu, press s or r to

select

Auto Tuning

�

System Setup

Menu Language

Auto Tuning

ATV Manual Tuning

DTV Manual Tuning

Location

DTV Settings

Quick Setup

English

Auto

Software Upgrade

2

Press OK�

A screen will appear warning that previous settings
will be deleted�

Auto Tuning

Previous settings will be lost! EXIT for no
change.

DTV and ATVTuning Mode

7MHz

Bandwidth

Start Scan

3

Use

v

or w to select

DTV

and

ATV, DTV

or

ATV

�

Then, press s to select

Start Scan

and press OK to

continue with the

Auto Tuning

�

Press

s

to select

Bandwidth

, press v or w to select

7MHz, 8MHz

or

7MHz and 8MHz

(- page 69)�
The TV will start to search for all available DTV and/
or ATV services�

You must allow the TV to complete the search. When the

search is complete, the

Auto Tuning

screen will display

the services found�

4

Use

s

or r to move through the list to select a

channel and press OK to view�

ATV Manual Tuning

- analogue -

Use the Manual Tuning operation if desired channels
cannot be preset by Auto Tuning or if you would like to

preset channels to specic position numbers one by one.

1

From the

System Setup

menu, press s or r to

select

ATV Manual Tuning

�

2

Press OK to display the

ATV Manual Tuning

menu�

Press r or s to select the position you want to set�

Pos. Label

ATV Manual Tuning

1

2

3

4

6

7

8

5

Channel

C2

C4

C5

C7

C12

C23

C27

C9

3

Press OK to display the settings menu� Press v or w

to select an item and press r or s to set the item as
shown below�

Position

ATV Manual Tuning

1

B/G

A C 2 0

A C G

B D H

I

E

F

A.Positionselection

B.System(Sound)

B/G

,

D/K, I or L

C.ColourSystem

A

: Automatic, P: PAL , S: SECAM,

N4

: NTSC 4�43 (MHz), N3: NTSC 3�58 (MHz)
If the colour of a certain channel is abnormal, the
automatic colour system selection (A) may have
malfunctioned or the sound system selection is
wrong� In this case, select another colour and/or
sound system�

D.Positionskipselection

Press

s

or r to turn the position skip option
on “8” or off “(”�The position will then be
skipped when you select channels with

P

U

or

P

u

�

The “8” mark will appear when you use the

Number

buttons on the remote control�

E.SignalClassselection

(

-

page 71)
Press s or r to select C or S�
C: 2 ch - 12 ch, 21 ch - 69 ch
S: 1 ch - 41 ch, 51 ch - 55 ch

F.Channelselection

Press

s

or r until your desired channel is

displayed (- page 71)�

18

G.Searchoperation

Press

r

to search up the band or s to search
down the band�
Press s or r repeatedly until your desired
channel is displayed�

NEVER PRESS ANY OTHER BUTTONS

WHILE THE SET IS TUNING�

H.ManualFineTuning

Press

s

or r until better picture and sound are

obtained�

I.Label

Station labels appear beside the position display
each time you turn on the TV, select a channel, or
press

�

Tochangeorcreatestationlabels:

1) Press

s

or r repeatedly to select a character for

the rst space, then press w�

*(blank space)

2) Repeat step 1) to enter the rest of the characters�
If you would like a blank space in the label
name, you must choose a blank space from the
list of characters�

Press OK to store your settings�

Sorting positions

- analogue -

ATV channels may be moved and stored to the position of
your choice�

1

From the

SETUP

menu, press s or r to select

ATV

Manual Tuning

�

2

With the list of channels now showing, press s or r

to select the channel you want to move and press w�

Pos. Label

ATV Manual Tuning

2

3

4

5

6

7

8

1

ABCD

EFGH

IJKL

MNOP

Channel

C2

C4

C5

C7

C12

C23

C27

C9

3

Use s or r to move through the list to your preferred

position� As you do so, the other channels will move
to make room�

4

Press v to store your move�

Repeat as necessary and press

EXIT

�

DTV Manual Tuning

- digital -

This feature is available for service engineers or can be used
for direct channel entry if the multiplex channel is known�

1

From the

System Setup

menu, press s or r to

select

DTV Manual Tuning

and press OK�

DTV Manual Tuning

WEAK

Signal Strength

Quality

Channel

GOOD

Start Scan

STRONGAVERAGE

22

XXX.X MHz

Bandwidth

7MHz

2

Enter the multiplex number using the number buttons

or press v or w to adjust the number up or down�

Press

s

to select

Bandwidth

, press v or w to select

7MHz, 8MHz

or

7MHz and 8MHz

(- page 69)�

Then press

s

to select

Start Scan

and press OK�

The TV will start to search for that multiplex�

Pos. Name

0 New Channels - Total 6

DTV Manual Tuning

20

2

21

22

23

TypeNew

When the multiplex is found, any channels that are
not currently in the channel list will be added and the
channel information will be updated�

3

Repeat as necessary� Press

EXIT

to nish.

Sorting Channels

- digital -

The channel order may be changed to suit your personal
preference�

1

From the

System Setup

menu, press s or r to

select

DTV Settings

and press OK�

2

Press s or r to select

Channels

and press OK�

DTV Settings

Channels

Parental Control

Parental PIN Audio

Subtitle and Audio

Local Time Setting

Standby Channel Update On

Dynamic Scan On

3

For your convenience, you can jump to specic places

in the list by one of the following methods�

Getting started

19

Pos. Name

Channels

20

2

21

22

23

Channels

Line No. 1/10

TV

1

□□□□□

2

□□□

Pos. Name

7

□□□□

30

□□□

40

□□□□□□

51

□□□□□

822

□□□□

823

□□□□□

Line Number Jump

— Press the

Number

button

to input the line number you want to select and press

OK

�

Station Letter Jump

— Press

or to jump to

the next station name with a different initial letter�

It is also possible to change the

Position

number of a

particular channel�

Renumber

— Press the

RED

button to renumber for
the selected channel� Edit the channel number using
the

Number

buttons and press

OK

�

Pos.

- - - -

Name

Move

— Press the

GREEN

button to activate

the

Move

feature� Press the

s

or r to select the
channel you wish to move and press OK to check� If
you wish to move multiple channels at once, select
another channel and check in the same way� Repeat as
necessary�
Once all desired channels have been checked, select

s

or r to place the focus at the position to which
you wish to move the channels� The channels will
be inserted above the selected channels� Press the

GREEN

button to execute the move�

Channels
Line No. 1/10

TV

1

□□□□□

Pos. Name

822

□□□□

823

□□□□□

2

□□□

7

□□□□

30

□□□

40

□□□□□□

51

□□□□□

Sort

— Press the

YELLOW

button. A conrmation

window will appear� Press

v

or w to select

Yes

and

press OK�

Sort

Your existing channel order will be lost. Do you wish to
continue?

Yes

The

Sorting Type

selection window will appear�

Sorting Type Number

Sort

Sort

Press v or w to set the sorting rule�

Number

mode:

Position No� order (numerical sequence)

A-Z Sort

mode:

Station name order (A to Z)

Press

s

to select

Sort

and press OK�

Setting the Standby Channel Update

- digital -

If the

Standby Channel Update

is set to On, when the
TV is in standby mode, Digital Tuning is automatically
executed and any new channels are saved�

1

From the

System Setup

menu select

DTV

Settings

and press OK�

2

Press s or r to select

Standby Channel Update

and press v or w to select On�

Selecting Dynamic Scan

- digital -

If the broadcast information has changed in your DVB-T
receiving area, the TV screen will display the message
"

Broadcast information has changed. Would you

like to rescan now?

"� Please follow the message� If
you do not wish for the TV to detect changes and prompt
you to rescan, you should set this feature to

Off

�

1

From the

DTV Settings

menu, press

s

or

r

to

select

Dynamic Scan

�

2

Press v or w

to select On or

Off

�

Setting the Location

You can select either

Home

or

Store

mode�

Home

is

recommended for normal home use� Select

Store

when

using a TV for displaying in a shop, etc�

1

From the

System Setup

menu, press s or r until

Location

is selected�

2

Press v or w to select

Home

or

Store

�

Analogue switch-off

This is a

digital

TV which is integrated to allow the use

of both

digital

and

analogue

services� However, during

the lifetime of this set it is very likely that

analogue

services will be switched off to allow for more new

digital

services�

This ‘switch-off’ will happen in a number of phases,
which will be advertised in your area well in advance� It is
recommended that at each phase the television is re-tuned
to ensure that existing and new

digital

services can be

viewed without Standby Channel Update disruption�

Getting started

20

Watching TV programmes

Programme Selection

Digital programmes

After you have tuned the TV, you have several ways to
navigate through all programmes:

• Press the

Number

buttons. You may omit the leading

zeroes, which will be appended automatically�

• Press

P

U

/

P

u

to view the previous or next position�
The channels are arranged in ascending order according
to the channel number�

• Press

List

to display the

Channel List

and press

s

or

r

to select a channel and press OK to view the channel

(- page 31)�

Analogue programmes

1

Enter the desired position number using the

Number

buttons on the remote control�
For positions below 10, use 0 and the required number
e�g�, for position 1�

2

You can also change the position by using

P

U

or

P

u

�

Note:

Changing positions between different format
channels takes several seconds.

Switching between positions

You can switch positions without entering an actual

position number each time�

1

Select the rst position you want to view.

2

Select the second position with the

Number

buttons

(0-9)�

3

Press � The previous position will be displayed�

Each time you press

, the TV will switch back and forth

between the two positions�

Selecting the menu language

Choose from 2 different languages (English or Français)
for the On-Screen-Display�

1

From the

System Setup

menu, press s or r to

select

Menu Language

�

2

Press v or w to select the desired language�

Location

Quick Setup

Auto

Software Upgrade

System Setup

Menu Language

Auto Tuning

ATV Manual Tuning

DTV Manual Tuning

DTV Settings

Antenna

English

Displaying the on-screen information

- analogue -

1

Press to display the following on-screen

information�

ABCD4

Mono

The information will disappear in 6 seconds�

• Position or external input mode selected

• Label (if set)

• Mono/Stereo/Dual audio status

• Position skip on/off information

2

To close the display instantly, press again�

On-screen information

- digital -

When viewing in Digital TV mode, the on-screen
information will give the details of the programme
currently being viewed�

1

Press to display the on-screen information�

7 7 Digital

(Personal Name)

11:00 - 12:00

12:00 - 12:59

Now

Next

Change EXIT Watch TV

Comprehensive coverage of local, national and international news
with analysis of the key stories of the day and a strong focus on
health, social and environmental issues.

News 31 min left

HD 16:9

11:20 Mon, 25 Apr

English

The information will disappear in 60 seconds�
On-screen information contains the following
information:

• Current Channel Number

• Channel Name

• Skip (if set) (

8

)

• Lock (if set) ( )

• Personal Name ( )

• Now and Next Programme Names

• Current date and time

• Video format of the current programme (SD/HD)

• Teletext availability ( )

• Subtitle availability ( )

Getting started

21

Getting started

• Parental rating: G, PG, M, MA, AV, R, etc.

• Dolby® Digital audio track availability (indicated by

Dolby D)

• Genre ( )

• Reminder Timer (if set) ( ✓)

2

Press s or r to select the “

Now

” or “

Next

”

information guide�

3

To set a reminder for the Next programme, select

“

Next

” and press OK� The

Set Timer

screen will

appear�

rpA 52 ,

Mon

05:01remiT Set

Mon, 25 Apr 11:00

□□□□□

Seven Wonder4
Start Time

10:49

Repeat

Once

Edit

Set Timer Delete Timer

4

The details of the programme will have been added to

the timer� Select

Set Timer

and press OK to save�
To indicate that a timer has been set, a check mark
will be displayed in the

Next

eld of the information

screen (✓)�

Note:

The Programme Timer LED indicator (- page 9)
will appear orange when a timer is set.

Displaying the Clock Display

You will always see a time display on screen when using

this feature�

1

From the

Preferences

menu, press s or r until

Clock Display

is selected�

2

Press v or w to select On or

Off

�

Note:

This feature will not be available until a digital
channel has been tuned.

HDMI Information Display

When the HDMI Information Display feature is On and
you are watching an HDMI input source, pressing the
button displays the HDMI signal information banner�

1

From the

Preferences

menu, press s or r until

HDMI Information Display

is selected�

2

Press v or w to select

On or Off

�

HDMI signal information is as follows:
Resolution, Scan Type, Frame Rate*, Aspect, Bit

Depth, Colour Space, RGB/YUV, Chroma Format and

Content Type (if available)�

* If the HDMI input source is interlaced, “

Field

Rate

” will be displayed instead of “

Frame Rate

”�

22

Using the TV’s features (General)

• Most of the picture/sound controls and functions are

available in both digital and analogue modes� However,
features not available will be greyed out�

Picture adjustment

Selecting the picture size

1

Press to display the picture size list and press s or

r

to select the appropriate picture size (or press

repeatedly to select the desired picture size directly)�

AVformat PCformat

Picture Size

4:3

Super Live

Cinema

Wide

Subtitle

Native

14:9

Picture Size

PC Wide

Dot by Dot

PC Normal

2

Press OK�

Wide

Use this setting when watching a wide-screen DVD, wide­screen video tape or a 16:9 broadcast (when available)�
Due to the range of wide-screen formats (16:9, 14:9, 20:9
etc�), you may see bars on the top and bottom of the screen�

4:3

Use this setting to view a true 4:3 broadcast�

Super Live

This setting will enlarge a 4:3 image to t the screen by

stretching the image horizontally and vertically, holding
better proportions at the centre of the image� Some
distortion may occur�

Cinema

When watching “all sides panel format” lms/video tapes,

this setting will eliminate or reduce the black bars on all
sides of the screen by zooming in and selecting the image
without distortion�

Subtitle

When subtitles are included on a letterbox format
broadcast, this setting will raise the picture so that most of
the text is displayed�

Subtitle

14:9

Use this setting when watching a 14:9 broadcast�

Native

This setting will display the image correctly without
distortion or picture clipping� However, the playback

movie (Divx le) from the USB device is with over scan

PC Normal

Use this setting for a PC connected via HDMI or RGB/
PC terminal when receiving PC signal format� This setting
will display the image correctly without distortion or
picture clipping�

23

Using the TV’s features (General)

PC Wide

Use this setting for a PC connected via HDMI or RGB/
PC terminal when receiving PC signal format� This setting
will display the image without picture clipping�

Dot by Dot

“Dot by Dot” is a non-scaling display� Depending on the
input signal format, the picture is displayed with side
panels and/or bars at the top and bottom (i�e� VGA input
source)�

Notes:

• Using the special functions to change the size of
the displayed image (e.g. changing the height/
width ratio) for the purpose of public display or
commercial gain may infringe on copyright laws.

• If the aspect ratio of the selected format is different
from the one of the TV transmission or video
programme, it can cause a difference in display.
Change to the correct aspect ratio picture size to
fix this.

• When using a PC connected via HDMI or RGB/PC
terminal, moving image quality may deteriorate.

Using the picture still feature

• Press r to freeze the picture�

Even if an image is frozen on the TV screen, the pictures
are still running on the input source� Audio continues to be
output as well�
To return to a moving picture, press

r

again�

(Moving) (Still)

Note:

If you use this function except for the purpose of
your private viewing and listening, it may infringe
upon copyrights protected by copyright laws.

Adjusting the Picture Position

- analogue -

Adjustment to the position of the picture may be made to
suit your viewing preferences�

1

From the

Display Settings

in the

Preferences

menu, press s or r to select

Picture Position

�

Auto Format On

4:3 Stretch Off

Picture Position

Display Settings

2

Press OK and press s or r to select the item you

want to adjust�

0

0

Picture Position

Horizontal Position

Reset

Vertical Position

3

Press v or w to adjust the settings as desired�

Horizontal Position

0

Notes:

• When the picture size is in

Wide

or

4:3

mode, only

the Horizontal Position can be adjusted.

• When the picture size is in

Native, PC Wide, PC

Normal

or

Dot by Dot

mode, this function will not

be available.

Resetting the Picture Position

This function resets your picture position settings to the
factory settings�

1

From the

Picture Position

menu, press s or r to

select

Reset

�

2

Press OK�

Activating the Picture Mode

This TV offers the choice of personalising the picture
style� Press to view the different modes available�

AutoView, Dynamic, Standard, Movie Night, Movie
Day, Movie Pro, Store, Game

and PC are preset

options and affect many features/settings within the TV�

Notes:

• The

Picture Mode

menu can also be displayed at

any time from the

Picture

menu.

• Because the

AutoView

mode automatically adjusts
picture settings based on ambient light conditions
and input signal content, the

Auto Brightness

Sensor

and

Expert Picture Settings

menus are

greyed out when it is selected.

•

Store

mode is only available when

Location

is set

to

Store

.

•

Game

mode is available in external input mode

(other than aerial input). When you select

Game

mode, suitable widescreen formats will be
selected.