Toshiba 32DB833G, 42DB833G Owner Manual
32DB833G
42DB833G
LCD TV /
Blu-ray™
COMBI Series
English
Safety Precautions ....................5
Contents
Tuning the Television ................17
Air Circulation ...................................... 5
Heat Damage ...................................... 5
Mains Supply ....................................... 5
Do ........................................................ 5
Do not .................................................. 5
Installation and important
information .................................6
Where to install.................................... 6
When using a Wall Bracket ................. 6
The Remote Control ..................8
Inserting Batteries ............................... 9
Effective Range of the Remote ........... 9
Connecting External
Equipment ..................................10
HDMI-LINK Connections ...........11
Connecting an HDMI or DVI
device to the HDMI input ...........12
To connect an HDMI device ................ 12
To connect a DVI device...................... 13
Connecting a Computer ............14
To connect a PC to the HDMI
terminal................................................ 14
Acceptable Video signals through
HDMI terminals .................................... 15
Acceptable PC signals through HDMI
terminals .............................................. 15
Using the Controls ....................16
Switching On ....................................... 16
Using the Remote Control ................... 16
Using the Side-Key Controls ............... 16
Quick Setup ......................................... 17
Setting the Channels .................19
Auto Tuning ......................................... 19
Manual Tuning ..................................... 20
Automatic Power Down ....................... 22
Reset TV ............................................. 22
DTV Settings ..............................23
Channels ............................................. 23
Channel Options.................................. 24
Subtitle and Audio ............................... 25
Password............................................. 25
Parental ............................................... 25
Common Interface ............................... 25
Digital On-Screen Information
and Programme Guide ..............26
Information .......................................... 26
On-Screen Information Icons .............. 26
Guide ................................................... 26
General Controls .......................27
Selecting Channels ............................. 27
Stereo and Bilingual Transmissions .... 27
Quick Access Menu ............................. 27
Subtitles............................................... 27
Picture Still .......................................... 27
Input Selection..................................... 27
Sound Controls ..........................28
Volume Controls and Mute Sound....... 28
Dual ..................................................... 28
Bass, Treble and Balance ................... 28
Stable Sound ....................................... 28
Surround Sound .................................. 28
2
Bass Boost .......................................... 28
SPDIF Type ......................................... 28
Audio Description ................................ 29
Widescreen viewing ..................30
Available Picture Size and Position
Control ................................................. 31
Picture Controls .........................32
Picture Position ................................... 32
Picture Mode ....................................... 32
Picture Preferences ............................. 32
Black/White Level ................................ 33
Cinema Mode ...................................... 33
Colour Temperature ............................. 33
Static Gamma...................................... 33
Reset ................................................... 33
Active Backlight ................................... 33
3D Colour Management ...................... 33
Base Colour Adjustment ...................... 34
Digital Noise Reduction ....................... 34
MPEG NR – Noise Reduction ............. 34
Enjoy Photos through USB
Port .............................................35
View Photo Files .................................. 36
Using Slide Show ................................ 36
Repeat Settings for Slideshow ............ 36
Set Interval Time ................................. 37
Using the Play List............................... 37
Background Music ............................... 37
Photo Info ............................................ 37
Enjoy Music through USB
Port .............................................38
Play Music Files .................................. 38
Repeat Settings ................................... 39
Using the Play List............................... 39
Music Info ............................................ 39
English
Enjoy Videos through USB
Port .............................................40
Play Video Files ................................... 41
Repeat Settings ................................... 42
Set ...................................................... 42
Using the Play List............................... 42
Slow Forward ...................................... 42
Step Forward ....................................... 42
Video Info ............................................ 42
Aspect Ratio ........................................ 42
Picture Mode ....................................... 42
Goto Time ............................................ 43
HDMI-LINK Controls ..................44
Equipment Control............................... 44
Input Source Selection ........................ 44
HDMI-LINK Menus .....................45
One Touch Play ................................... 45
System Standby .................................. 45
System Audio Control .......................... 45
Enable HDMI-LINK .............................. 45
Auto Power On .................................... 45
Auto Standby ....................................... 46
Amplier Control .................................. 46
Speaker Preference ............................ 46
Preference Controls ..................47
On Timer .............................................. 47
Sleep Timer ......................................... 47
EPG ..................................................... 48
Panel Lock........................................... 49
Auto Format (Widescreen) .................. 49
4:3 Stretch ........................................... 49
Blue Screen ......................................... 49
Side Panel ........................................... 49
System Information ............................. 49
Software Upgrade ............................... 50
3
Text Services and Text
English
Information .................................51
Setting the Modes ............................... 51
Navigating Pages using Auto .............. 51
Navigating Pages using LIST .............. 51
Control Buttons.................................... 51
PC Settings ................................52
Horizontal and Vertical Position........... 52
Horizontal Width .................................. 52
Clock Phase ........................................ 52
Reset ................................................... 52
Input Selection and AV
Connections ...............................53
HDMI1 Audio ....................................... 53
Lip Sync Mode .................................... 53
Input Signal Selection.......................... 53
Disc Playback ............................54
Wide Playback Compatibility ............... 54
Blu-ray Disc™ Applications ................. 54
Loading a Disc..................................... 54
Loading a USB Flash Drive
(For BD-LIVE™ Contents) ................... 55
Notes on Discs .................................... 55
Operating On-Screen Control Menu.... 67
Connecting to Network (For
BD-LIVE™) .................................69
IP Setting ............................................. 69
Internet Connection ............................. 70
Connection Test ................................... 70
BD-Live Connection ............................ 70
Proxy Setting ....................................... 70
Trademarks and License...........71
Notes on Copyright.............................. 72
Frequently Asked Questions ....73
Specications and
Accessories ...............................76
License Information on the
Software Used in This Product ...77
Playable Discs ...........................56
Language Settings .............................. 57
Playing Discs on the Market ................ 57
BD-LIVE™ ........................................... 58
Playing BD-R/RE, DVD±R/RW ............ 59
Playback Function ............................... 59
Playing Music/Video/Picture Files ....... 62
System Settings .................................. 63
Playback Settings ................................ 64
Security Settings ................................. 65
System Information ............................. 66
Information on DivX
®
Video ................. 66
4
Safety Precautions
This equipment has been designed and manufactured to meet international safety standards but, like
any electrical equipment, care must be taken to obtain the best results and for safety to be assured.
Please read the points below for your own safety. They are of a general nature, intended to help with all
electronic consumer products and some points may not apply to the goods you have just purchased.
Air Circulation
Leave more than 10cm clearance around the
TV to allow adequate ventilation. This will prevent overheating and possible damage to the
TV. Dusty places should also be avoided.
DO NOT REMOVE ANY FIXED COVERS AS
THIS WILL EXPOSE DANGEROUS AND ‘LIVE’
PARTS.
THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE
SHOULD BE READILY OPERABLE.
English
Heat Damage
Damage may occur if the TV is left in direct
sunlight or near a heater. Avoid places subject
to extremely high temperatures or humidity.
Place in a location where the temperature
remains between 5°C (41°F) min. and 35°C
(94°F) max.
Mains Supply
The mains supply required for this equipment
is 220-240V AC 50/60Hz. Never connect to a
DC supply or any other power source. DO ensure that the TV is not standing on the mains
lead. Use only the supplied lead.
Do not cut off the mains plug from this
equipment, this incorporates a special Radio
Interference Filter, the removal of which will
impair its performance. In the UK, the fuse
tted in this plug is approved by ASTA or BSI
to BS1362.
It should only be replaced by a correctly rated
and approved type and the fuse cover must be
retted.
IF IN DOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN.
Do
DO read the operating instructions before you
attempt to use the equipment.
DO ensure that all electrical connections
(including the mains plug, extension leads and
inter-connections between pieces of equipment) are properly made and in accordance
with the manufacturers’ instructions. Switch off
and withdraw the mains plug before making or
changing connections.
DO consult your dealer if you are ever in doubt
about the installation, operation or safety of
your equipment.
DO be careful with glass panels on equipment.
Do not
DO NOT obstruct the ventilation openings of
the equipment with items such as newspapers,
tablecloths, curtains, etc. Overheating will cause
damage and shorten the life of the equipment.
DO NOT allow electrical equipment to be
exposed to dripping or splashing or objects lled
with liquids, such as vases, to be placed on the
equipment.
DO NOT place hot objects or naked ame
sources, such as lighted candles or nightlights
on, or close to equipment. High temperatures
can melt plastic and lead to res.
DO NOT use makeshift stands and NEVER
x legs with wood screws. To ensure complete
safety, always t the manufacturers’ approved
stand, bracket or legs with the xings provided
according to the instructions.
DO NOT leave equipment switched on when
it is unattended, unless it is specically stated
that it is designed for unattended operation or
has a standby mode. Switch off by withdrawing
the plug, make sure your family know how to
do this. Special arrangements may need to be
made for people with disabilities.
DO NOT continue to operate the equipment if
you are in any doubt about it working normally,
or it is damaged in any way – switch off, withdraw the mains plug and consult your dealer.
WARNING – excessive sound pressure from earphones or headphones can cause hearing loss.
ABOVE ALL
NEVER let anyone, especially children, push or
hit the screen, push anything into holes, slots or
any other openings in the case - this could result
in a fatal electrical shock.
NEVER guess or take chances with electrical
equipment of any kind – it is better to be safe
than sorry.
5
English
Locate the TV away from direct sunlight and strong
lights, soft, indirect lighting is recommended for
comfortable viewing. Use curtains or blinds to
prevent direct sunlight falling on the screen.
Place the TV set on a stable, level surface that
can support the weight of the TV. As an additional
safety measure you secure the TV to the level
surface or a wall, as shown in the illustration, using
sturdy strap.
Otherwise secure the TV on the level surface
(Fall prevention hole in stand) using the mounting
screw.
The LCD display panels are manufactured using
an extremely high level of precision technology,
however sometimes some parts of the screen may
be missing picture elements or have luminous
spots. This is not a sign of a malfunction.
Make sure the TV is located in a position where it cannot be pushed or hit by objects, as pressure
will break or damage the screen. Also, please be certain that small items cannot be inserted into
slots or openings in the case.
Cleaning the screen and cabinet...
Turn off the power, and clean the screen and cabinet with a soft, dry cloth. We recommend that you
do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage.
Please use a wall bracket appropriate for the size and weight of the LCD TV.
• Two people are required for installation.
• Never use the four screws attached to the TV.
• To install a wall-mount from another manufacturer, use the SPACERS (supplied).
1. Unplug and remove any cables and/or other
component connectors from the rear of the TV.
2. Carefully lay the front of the unit face down on a at,
cushioned surface such as a quilt or blanket.
3. Follow the instructions provided with your wall
bracket. Before proceeding, make sure the appropriate bracket(s) are attached to the wall and
the back of the TV as described in the instructions provided with the wall bracket.
4. Make sure to place the spacers supplied between the bracket and the back of the TV.
5. Always use the screws supplied or recommended by the wall mount manufacturer.
Removing the Pedestal Stand:
1. Carefully lay the front of the unit face down on
a at, cushioned surface such as a quilt or a
blanket. Leave the stand protruding over the
edge of the surface.
NOTE: Extreme care should always be used when
removing the pedestal stand to avoid damage to the LCD panel.
Where to install
Fixing strap
Fixing strap
Stand style is dependent on model
When using a Wall Bracket
*Screw Type for Wall Bracket:
• 32DB833G: M6/10mm/20KG
• 42DB833G: M8/12mm/20KG
2. Remove the screws.
3. Once you have removed all six screws
holding the pedestal stand in place, remove
the pedestal stand from the TV by sliding
the pedestal stand away from the TV.
Sturdy tie (as short as possible)
Fall prevention hole in stand
Remove four screws.
(Do not reuse these screws for
attaching a wall bracket.)
Place four spacers (supplied).
Stand clip
Installation and important information
Screw
Wall bracket
Spacer
(supplied)
TV back panel
6
Please take note
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) re;
ii) earthquake;
iii) accidental damage;
iv) intentional misuse of the product;
v) use of the product in improper conditions;
vi) loss and/or damage caused to the product while in the possession of a third party;
any damage or loss caused as a result of the owner’s failure and/or neglect to follow the in-
vii)
structions set out in the owner’s manual;
any loss or damage caused directly as a result of misuse or malfunction of the product when
viii)
used simultaneously with associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or
damage including but not limited to the following, loss of prot, interruption of business, the loss of
recorded data whether caused during normal operation or misuse of the product.
• If stationary images generated by 4:3 broadcasts, text services, channel identication logos,
computer displays, video games, on-screen menus, etc. are left on the TV-screen for any length
of time they could become conspicuous, it is always advisable to reduce both the brightness and
contrast settings.
• Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the
image at the 4:3 outlines, this is not a defect of the LCD TV and is not covered under the manufacturers warranty. Regular use of other size modes (e.g.: Super Live) will prevent permanent
retention.
SYMBOL SYMBOL DEFINITION
DANGEROUS VOLTAGE: The lightening ash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user to the presence of uninsulated “DANGEROUS VOLTAGE” within the product’s enclosure that may
be of sufcient magnitude to constitute a risk of electric shock to people.
INSTRUCTIONS: The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
English
CLASS 1
LASER PRODUCT
WARNING: To prevent the spread of re, keep candles or other open ames
away from this product at all times.
LASER CAUTION:
• Use of controls or adjustments or performance of procedures other than
those specied herein may result in hazardous radiation exposure.
• To prevent direct exposure to laser beam, do not try to open the enclosure.
• Visible and invisible laser radiation when open and interlocks defeated.
• DO NOT STARE INTO BEAM.
7
English
The Remote Control
Simple at-a-glance reference of your remote control.
2
3
5
6
8
12
14
17 18
20
22
25
26
29
30
1 Toggles between TV ON or Standby
2 Ejects the disc
3 Switches between TV/DISC
4 Switches between ATV and DTV
5 Number buttons
6 Audio Description (in DTV mode)
7 Toggles between external input sources
8 Mutes the sound
9 Displays a popup menu or disc menu
during playback
10 Changes the channel
1
11 Changes the volume
12 Displays the Quick access menu
4
13 Opens Media Center (not during playback)
Displays the top menu during playback
14 In TV mode: Displays EPG (in DTV mode)
In DISC mode: Displays On-Screen
Control menu during playback
15 Exits the menu system
16 Menu navigation: ▲, ▼, ◄, ►
In Text mode: Changes the page
7
Conrms the selection
17 Displays the on-screen menu
18 Goes to the previous level of the menu
9
19 Playback function keys
1110
Starts/resumes playback
Pauses playback to enter still mode
13
Stops playback
Pressing once returns to the beginning
of the current title, chapter, track or le
15
Fast-reverses playback of the disc
Fast-forwards playback of the disc
Press to skip to the next title, chapter,
16
track or le
20 Opens a window to program playback order
during playback
21 During DVD disc playback, press the
BOOK MARK button to add the bookmark;
press and hold for a few seconds to display
the list of bookmark which you added before
on the screen, then you can press the
19
button to select the bookmark or button
to delete the bookmark.
22 Displays thumbnail view of JPEG les
21
(during playback) in loaded media
23 Zoom in/out a picture during playback
23
24 Reveals concealed text
Holds a wanted page
24
Enlarges text display size
Selects a page while viewing a normal
27
picture
28
25 Displays the teletext screen
26 Still Picture
27 In TV mode: Selects the audio
transmissions (Stereo/Bilingual)
In DISC mode: Selects the soundtrack
language
28 Sets the subtitle of a multi-language DVD or
Blu-ray Disc™
29 In TV/DISC mode: Displays on-screen
information
In Text mode: Accesses the index page
30 Selects angles while playing a scene
recorded in multi-angle
NOTE: Colour label denitions:
• Blue - for Disc player
• Grey - for TV
8
Inserting Batteries
Remove the battery compartment cover
in the direction of the arrow.
English
Effective Range of the Remote
Aim the remote control directly at the remote
sensor.
Remote sensor
Insert the two supplied “R03/AAA” batteries and make sure the polarities are
matched correctly.
Replace the cover.
NOTE: Do not combine a used, old battery
with a new one or mix battery types.
Remove dead batteries immediately
to prevent acid from leaking into the
battery compartment. Dispose of them
in accordance with instructions on page
95 of this manual.
Warning: Batteries must not be exposed to
excessive heat such as sunlight or
re.
Maximum distance approx. 5m
Transmitter window
30o30
o
The remote control will not work properly in the
following cases:
If bright sunlight directly beams on the front of
the TV.
If an obstacle is placed between the TV and
the remote.
9
English
Connecting External Equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch,
remove the mains plug from the wall socket.
Connect the power cord into the AC-IN socket found at the back of the TV.
BD-LIVE™
(LAN jack)
HDMI 2 INPUT
SOCKET
AC−IN
HDMI 1 INPUT
SOCKET
RGB/ PC
Composite INPUT
Aerial cables: - - - - - - - - - - - - - - - - - - Connect the aerial to the (antenna) socket on the rear of the TV.
If you use a decoder and/or media recorder, connect through the decoder and/or media recorder to the
TV.
SCART cables: - - - -- - - - - - - - - - - - - - -
Connect the video recorder IN/OUT or decoder TV socket to the TV. Connect the media player SAT
socket to the decoder MEDIA REC. socket.
LAN jack: - - - -- - - - - - - - - - - - - - Use this to connect to a network with an always-on broadband connection. It is reserved for the usage
of BD-LIVE™.
Before running Auto Tuning put your decoder and media recorder to Standby.
HDMI® (High-Denition Multimedia Interface) is for use with a DVD, decoder or electrical equipment
with digital audio and video output. It is designed for best performance with 1080i high-denition video
signals but will also accept and display 480i, 480p, 576i, 576p, 720p and 1080p. HDMI1 also support
VGA, SVGA, XGA, WXGA and SXGA.
NOTE: Although this TV is able to connect to HDMI equipment, it is possible that some equipment
may not operate correctly.
A wide variety of external equipment can be connected to the back of the TV, therefore the
relevant owners manuals for all additional equipment must be referred to.
If the TV automatically switches over to monitor external equipment, return to normal TV by pressing
the desired channel button. To recall external equipment, press
to select.
10
HDMI-LINK Connections
The basic functions of connected audio/video equipment can be controlled using the television’s
remote control if a HDMI-LINK compatible device is connected.
The back of your television
AV amplifier
HDMI outHDMI in
English
Playback equipment
HDMI out
Playback equipment
HDMI out
11
Connecting an HDMI or DVI device to the HDMI input
HDMI
cable
HDMI device
HDMI out
(not supplied)
English
The HDMI input on your television receives digital audio and uncompressed digital video from an
HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top
box or DVD player with HDMI or DVI output). For acceptable video signal formats, see page 15.
NOTE:
• Some early HDMI equipment may not work properly with your latest HDMI TV, due to the
adoption of a new standard.
• Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.
To connect an HDMI device
Connect an HDMI cable (type A connector) from the device to the HDMI terminal.
For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo
(
• If your HDMI connection is capable of 1080p and/or your television is capable of refresh rates
• HDMI cable transfers both video and audio. Separate analogue audio cables are not required
®
).
greater than 50Hz, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work
properly with this mode.
(see illustration).
To view the HDMI device video, press the button to select HDMI 1 or HDMI 2 mode.
12
To connect a DVI device
DVI device
HDMI-to-DVI adapter cable
(not supplied)
Audio cable for HDMI
to television connection
(not supplied)
Connect an HDMI-to-DVI adapter cable (HDMI type A connector) to the HDMI 1 terminal and audio
cables to the PC/HDMI (AUDIO) socket (see illustration).
• The recommended HDMI-to-DVI adapter cable length is 2m (6.6ft).
• An HDMI-to-DVI adapter cable transfers video only.
• Separate analogue audio cables are required for audio receivers.
English
To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these
procedures:
• When turning on your electronic components, turn on the television rst, and then the HDMI or
DVI device.
• When turning off your electronic components, turn off the HDMI or DVI device rst, and then the
television.
[1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection,
which is being standardized for reception of high-denition video signals. Because this is an evolving technology, it is possible that
some devices may not operate properly with the television.
HDMI, the HDMI Logo, and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
13
English
the back of your television
HDMI-to-DVI
adapter cable
(not supplied)
2
Computer
Audio cable for PC to television
connection (not supplied)
Connecting a Computer
With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the televisions speakers.
To connect a PC to the HDMI terminal
When connecting a PC to the HDMI terminal on the television, use an HDMI-to-DVI adapter cable
and an analogue audio cable.
If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). A separate analogue cable is not necessary.
For acceptable PC and video signal formats, see page 15.
NOTE:
• The edges of the images may be hidden.
• If connecting a certain PC model with a unique PC signal, the PC signal may not be
detected correctly.
14
Acceptable Video signals through HDMI terminals
Resolution H. Frequency (kHz) V. Frequency (Hz)
480i 15.734 60.000
480p 31.500 60.000
576i 15.625 50.000
576p 31.250 50.000
720p 37.500 50.000
720p 45.000 60.000
1080i 28.125 50.000
1080i 33.750 60.000
1080p 27.000 24.000
1080p 28.125 25.000
1080p 33.750 30.000
1080p 56.250 50.000
1080p 67.500 60.000
Acceptable PC signals through HDMI terminals
English
Resolution H (kHz) V(Hz)
640 x 480 31.369 59.940 25.175 Negative Negative 800 525
640 x 480 37.861 72.809 31.500 Negative Negative 832 520
640 x 480 37.500 75.000 31.500 Negative Negative 840 500
800 x 600 35.160 56.250 36.000 Positive Positive 1024 625
800 x 600 37.879 60.317 40.000 Positive Positive 1056 628
800 x 600 48.077 72.188 50.000 Positive Positive 1040 666
800 x 600 46.875 75.000 49.500 Positive Positive 1056 625
1024 x 768 48.363 60.004 65.000 Negative Negative 1344 806
1024 x 768 60.023 75.029 78.750 Positive Positive 1312 800
1280 x 768 47.776 59.870 79.500 Negative Positive 1664 798
1360 x 768 47.712 60.015 85.500 Positive Positive 1792 795
1280 x 1024 63.981 60.020 108.000 Positive Positive 1688 1066
1280 x 1024 79.976 75.025 135.000 Positive Positive 1688 1066
Pixel Clock
(MHz)
H-Polarity V-Polarity H-Total V-Total
15
English
Using the Controls
While all the necessary adjustments and controls for the television are made using the remote control,
the buttons on the television may be used for some functions.
Power
Channel Up / Programme Up
Disc Slot
C.I. Slot
Channel Down / Programme Down
Volume up
Volume down
Menu
Input
Eject
Media USB Port
HDMI 2 INPUT
SOCKET
USB (BD-LIVE™)
Switching On
If the RED Standby LED is unlit, check that
the plug is connected to the power supply. If
the picture does not appear, press on the
remote control, it may take a few moments.
To put the TV into Standby, press
on the
remote control. To view the TV, press again.
The picture may take a few seconds to appear.
Using the Remote Control
To set up the TV, you will now need to use the
on screen menus. Press MENU on the remote
control to see the menus.
The on-screen menu appears as a list of ve
icons. Each icon can be selected by pressing
◄ or ► on the navigation ring on the remote
control, its respective options will appear right
side.
To use the options, press
menu. Then press ▲ or ▼ on the navigation
ring to move up and down through the menu
and use , ◄ or ► to select the required
choice. Follow the on-screen instructions. The
functions of each menu are described in detail
throughout this manual.
to enter the sub-
GREEN LED − On Timer
RED LED − Standby
GREEN LED − Power on
Using the Side-Key Controls
TV mode:
To change the volume, press
To alter the channel, press
Press MENU,
, or to control the
sound and picture options.
Press MENU to exit.
To select an external input, press
use , or to move through the list
until the appropriate input source is selected.
Disc mode:
To play, press
To eject, press
; to stop, press .
.
Please always refer to the owner’s manual of
the equipment to be connected for full details.
NOTE: Inserting the headphone plug will mute
the sound from all speakers.
.
.
and then
16
Tuning the Television
Before switching on the television put your decoder and media recorder to Standby if they are connected.
To set up the television use the buttons on the remote control as detailed on page 8.
Quick Setup
For rst time use, plug in the TV and
press .
The Quick Setup screen will appear.
Press ▲ or ▼ to select Audio Language 2nd and then press ◄ or ► to
select your preferred language.
Press to select Tuner Mode.
NOTE: This option is based on the
Language
Country
Digital Subtitle Language
Digital Subtitle Language 2nd
Audio Language
Audio Language 2nd
Quick Setup
English
Germany
English
English
English
English
country specied in the Quick
Setup menu.
Tuner Mode
Antenna
English
Select Tuner Mode
OK
NOTE: The Quick Setup menu can also
be accessed in the SETUP menu.
Press ▲ or ▼ to select Language
and then press ◄ or ► to select your
language (English, Français, Deutsch,
Español, Italiano, Português, Nederlands, Svenska, Dansk, Norsk, Suomi,
Polski, Slovenščina, Magyar, Slovensky,
Český, Pyccкий, Românâ, бългapcки,
Srpski, Eλληvıκά, Hrvatski, Türkçe or
Українська).
Press ▲ or ▼ to select Country and
then press ◄ or ► to select your coun-
try (Germany, Denmark, Spain, Finland,
France, Poland, Turkey, Hungary,
Slovenia, Ukraine, Slovakia, Luxembourg, Romaina, UK, Italy, Netherlands,
Sweden, Bulgaria, Greece, Russia, Norway, Ireland, Portugal, Others, Austria,
Belgium, Sweitzerland or Czech).
Press ▲ or ▼ to select Digital Subtitle
Language and then press ◄ or ► to
select your preferred language.
Press ▲ or ▼ to select Digital Subtitle
Language 2nd and then press ◄ or ►
to select your preferred language.
Press ▲ or ▼ to select Audio Language and then press ◄ or ► to select
your preferred language.
Select Location
OK
RETURN
Back
Press ◄ or ► to select Antenna or
Cable.
Press to select Location.
OK
Location
Store
RETURN
Back
To use the TV for the display in a store showroom,
please select [Store].
[Home] mode is recommended for normal use.
Select Auto tuning
Press ◄ or ► to select Home or Store.
When Store is selected, the conrmation window appears.
OK
Location
NO
RETURN
Back
You have selected [Store].
This mode consumes more energy.
Are you sure you want to set to this mode?
Select Auto tuning
Press ◄ or ► to select YES or NO.
17
English
Press to enter the Auto tuning menu.
NOTE: Please make sure the aerial is con-
nected to the TV before tuning.
Auto tuning
Tuning Mode
Start Scan
Edit
RETURN
ATV and DTV
OK
Back
Press ▲ or ▼ to select Tuning Mode
and then press ◄ or ► to select ATV ,
DTV or ATV and DTV.
Press ▲ or ▼ to select Start Scan and
press .
Progress
1 %
ATV
0 %
DTV
Channel: C3 Station:
Auto tuning
EXIT
Stop
Found
0
0
The search will begin for all available stations.
The slide bar will move along the line as the
search progresses.
You must allow the TV to complete the
search.
When the search is completed the TV will
automatically select the rst-found channel. This
may not be a clear picture or the signal may
be weak, so the station order can be changed
using ATV/DTV Manual Tuning in the SETUP
menu.
NOTE: The time will be set automatically by
transmission but can be advanced or
decreased by using Local Time Setting
in the DTV Settings screen.
18
Setting the Channels
NOTE: When Parental Block is activated, the 4-digit password is needed.
English
Auto Tuning
The Auto tuning function will completely re-
tune the television and can be used to update
the channel list.
NOTE:
• It is recommended that Auto tuning
is run periodically to ensure that all
new services are added.
• All the current channels and settings,
for example, the locked channels, will
be lost.
Tuner Mode - Antenna
Press MENU. Press ◄ or ► to select
SETUP and press to enter the sub-
menu.
PICTURE SOUND
Press ▲ or ▼ to select Auto tuning, and
press to enter the submenu.
Language
Country
Tuner Mode
Auto tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
AV connection
Picture Position
Quick Setup
OK
Enter
Press ▲ or ▼ to select Tuning Mode
and press ◄ or ► to select ATV , DTV or
ATV and DTV.
Previous settings will be lost !
Press EXIT for no change.
Tuning Mode
Start Scan
SETUP
RETURN
Auto tuning
APPLICATIONS PREFERENCES
English
Germany
Antenna
OK
OK
OK
OK
OK
Back
ATV and DTV
OK
1/2SETUP
Press ▲ or ▼ to select Start Scan and
press to start Auto Tuning.
Progress
2 %
ATV
0 %
DTV
Channel: C4 Station:
Auto tuning
EXIT
Stop
Found
0
0
Tuner Mode - Cable
Switching between tuner modes will change the
features available on your television.
All the current channels and settings, for example, the locked channels, will be lost.
In the SETUP menu, press ▲ or ▼ to select
Tuner Mode and press
.
Press ◄ or ► to select YES or NO.
This may change the features available on your
TV. Continue?
Edit Enter
Tuner Mode
NO
OK
RETURN
Back
Press MENU. Press ◄ or ► to select
SETUP and press to enter the sub-
menu.
Press ▲ or ▼ to select Auto tuning, and
press to enter the submenu.
Language
Country
Tuner Mode
Auto tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
AV connection
Picture Position
Quick Setup
English
Germany
Cable
OK
OK
OK
OK
OK
1/2SETUP
Edit
RETURN
Back
19
OK
Enter
RETURN
Back
English
Press ▲ or ▼ to select Tuning Mode
and press ◄ or ► to select ATV , DTV or
ATV and DTV.
Edit
Auto tuning
RETURN
ATV and DTV
OK
Quick Scan
Auto
Auto
Auto
Auto
Auto
Back
Previous settings will be lost!
Press EXIT for no change.
Tuning Mode
Start Scan
Operation Selection
Scan type
Start Frequency
End Frequency
Modulation
Symbol Rate
Network ID
Press ▲ or ▼ to select Operator Selection, and press ◄ or ► to select it.
Press ▲ or ▼ to select Scan type, and
press ◄ or ► to select Full Scan or
Quick Scan.
NOTE: Channels with a weak signal may
be missed by Quick Scan.
Press ▲ or ▼ to select Start Frequency, End Frequency, Modulation,
Symbol Rate or Network ID, and use
number key pad on the remote to dene
the information or select Auto for tuning.
Press ▲ or ▼ to select Start Scan and
press
to start tuning.
NOTE:
• The information should be
given by your cable provider.
• Network ID is only available
for Quick Scan.
Manual Tuning
There are two TV modes: ATV and DTV that
can be tuned-in manually using Manual Tun-
ing.
ATV mode - Antenna/Cable
Press MENU. Press ◄ or ► to select
SETUP and press to enter the sub-
menu.
Press ▲ or ▼ to select ATV Manual Tun-
ing and press to enter the submenu.
Language
Country
Tuner Mode
Auto tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
AV connection
Picture Position
Quick Setup
OK
Enter
RETURN
Back
Press p or q to select the programme
position you want to arrange and then
press ►.
1
2
3
4
5
6
ATV Manual Tuning
Channel
C1
C2
C3
C4
C5
C6
Station
−−−−−
−−−−−
−−−−−
−−−−−
−−−−−
−−−−−
Position
English
Germany
Antenna
OK
OK
OK
OK
OK
1/2SETUP
20
OK
Sort Enter
RETURN
Back
Press p or q to move through the list to
your preferred position. As you do so the
other stations will move to make room.
Press t to store programme position.
1
2
3
4
5
6
Store
ATV Manual Tuning
Channel
C2
C1
C3
C4
C5
C6
RETURN
Station
−−−−−
−−−−−
−−−−−
−−−−−
−−−−−
−−−−−
Back
Position
Press to display the breakdown
menu. Press t or u to select an item,
then press p or q to select the item as
shown below.
ATV Manual Tuning
Manual fine tuning
1 BG P C69 0
Select Change Save
A B C D E F G H I
OK
−−−−−
RETURN
Position Item Description
A Position The number to be pressed on
B System Specic to certain areas
C Colour
system
D Skip
E Signal
Class:
F Channel The channel number on
G Searching Search up and down for a
H Manual
ne tuning
I Station Station identication. Use
the remote control
Factory set to Auto, should
only be changed if problems
are experienced, i.e. NTSC
input from external source
means nothing has been
stored or the facility to skip
the channel is On
The channel classication
which a station is being
broadcast
signal
Turn on to execute ne tune
function. Turn off to execute
manual ne tune function
the p or q and ◄ or ►
buttons to enter up to seven
characters
Back
DTV mode - Antenna
Press MENU. Press ◄ or ► to select
SETUP and press to enter the sub-
menu.
Press ▲ or ▼ to select DTV Manual Tun-
ing and press to enter the submenu.
Language
Country
Tuner Mode
Auto tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
AV connection
Picture Position
Quick Setup
OK
Enter
RETURN
Press ▲ or ▼ to select RF Channel and
press ◄ or ► to select or use number
key pad on the remote to enter a channel.
DTV Manual Tuning
Signal Strength
Quality
RF Channel
Start Scan
0−9
Weak Average Strong
Poor
EditInput
Press ▲ or ▼ to select Start Scan and
press to start tuning.
English
Germany
Antenna
Back
RETURN
English
1/2SETUP
OK
OK
OK
OK
OK
5
OK
Back
Press to save.
21
DTV mode - Cable
English
Press MENU. Press ◄ or ► to select
SETUP and press to enter the sub-
menu.
Press ▲ or ▼ to select DTV Manual Tun-
ing and press to enter the submenu.
Language
Country
Tuner Mode
Auto tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
AV connection
Picture Position
Quick Setup
OK
Enter
RETURN
Back
English
Germany
Cable
OK
OK
OK
OK
OK
1/2SETUP
Press ▲ or ▼ to select Frequency,
Modulation or Symbol Rate, and use
number key pad on the remote to dene
the information.
DTV Manual Tuning
Signal Strength
Quality
Frequency
Modulation
Symbol Rate
Start Scan
0−9
Weak Average Strong
Poor
113.000 MHz
QAM 16
4000 KS/s
OK
RETURN
EditInput
Back
Press ▲ or ▼ to select Start Scan and
press to start tuning.
Automatic Power Down
The TV will automatically turn itself off
(standby) within 4 hours, if you do not touch
the control buttons on the remote control or on
the TV control panel. It will also automatically
turn off if no input signal is detected after approximately 15 minutes.
In the SETUP menu, press ▲ or ▼ to
select Automatic Power Down.
Press ◄ or ► to select On or Off.
Automatic Power Down
Location
Software Upgrade
System Information
Reset TV
Edit
RETURN
Back
Off
Home
OK
OK
OK
2/2SETUP
Reset TV
Selecting Reset TV will reset all TV settings to
their original factory values.
In the SETUP menu, press ▲ or ▼ to
select Reset TV and press .
Press ◄ or ► to select YES to conrm
or select NO to exit and press .
Previous settings will be lost !
Press EXIT for no change.
Reset TV
NO
22
Select Enter
OK
RETURN
Back
DTV Settings
English
Channels
The channel order may be changed to suit
your personal preference.
NOTE: This function is only available in DTV
mode.
Press MENU. Press ◄ or ► to select
SETUP and press to enter the submenu.
PICTURE SOUND
Press ▲ or ▼ to select DTV Settings and
press to enter the submenu.
Press ▲ or ▼ to select Channels and
press .
Channels
Channel Options
Subtitle And Audio
Password
Parental
Local Time Setting
Common Interface
OK
Select
Press ▲ or ▼ to select Channels.
SETUP
DTV Settings
RETURN
APPLICATIONS PREFERENCES
OK
OK
OK
OK
OK
OK
Back
Re-number
Press PROGRAM on the remote to renumber the highlighted channel.
Edit the channel number using the number
keys on the remote and press .
2
SVT 2 Sverige
SVT 1 Sverige
− −−
Input
Channels
OK
Enter
Name
RETURN
Position
1
0−9
Skip
Press BOOK MARK on the remote. A
icon appears.
1
SVT 1 Sverige
2
SVT 2 Sverige
Re−number Skip
Channels
Name
Position
OK
Sort
RETURN
TV
Back
TV
Back
OK
Position
Sort
1
2
Channels
Name
SVT 1 Sverige
SVT 2 Sverige
Re−number Skip
RETURN
TV
Back
23
Sort
English
Press p or q to select the desired
channel and then press . A tick icon
appears.
2
1
OK
Channels
SVT 1 Sverige
SVT 2 Sverige
Store
Name
RETURN
Position
Press p or q to select the channel you
wish to swap with the one selected in Step
8 and then press .
The positions of the two channels are
swapped.
1
2
OK
Channels
SVT 2 Sverige
SVT 1 Sverige
Store
Name
RETURN
Position
Channel Options
This function is to setup the Skip or Lock for
currently watched channel.
Skip Channels
The feature allows you to set channel that will
be skipped when P
tune.
In the DTV Settings menu, press ▲ or
▼ to select Channel Options, and press
to enter the submenu.
Channels
Channel Options
Subtitle And Audio
Password
Parental
Local Time Setting
Common Interface
or P are used to
DTV Settings
Back
Back
Press ◄ or ► to highlight the skip
( ) box.
CH
TV
800
Channel Options
DEEJAY TV
OK
Select Enter
Name
RETURN
TV
Back
Press to select. A tick appears in the
box.
NOTE: Skipped channels cannot be selected
or P but still be accessed by
by P
direct entry (when tuned a icon will
be displayed in the banner to indicate
as a skipped channel).
Parental Control
TV
Locking channels stops the viewing of digital
channels, and they can only be accessed by
entering the password.
In the DTV Settings menu, press ▲ or
▼ to select Channel Options, and press
to enter the submenu.
Press ◄ or ► to highlight the lock
( ) box.
Press to select. A tick appears in the
box.
If the password has already been set,
password entry will be required to set the
locked channels.
800
CH
DEEJAY TV
Channel Options
Name
OK
Select Enter
RETURN
TV
Back
From this point on, when any of the
channels in the Channel Options list
OK
OK
OK
OK
OK
OK
are selected, the password must be
entered before they can be accessed.
OK
Select
RETURN
Back
24
Subtitle and Audio
You can choose the Subtitle Type or Audio
Type from Normal or Hearing Impaired. If
the Hearing Impaired is selected, it provides
subtitle services to deaf and hard of hearing
viewers with additional descriptions.
Subtitle Language or Audio Language allow
a programme or lm to be viewed with a choice
of soundtrack language, provided they are currently being broadcast.
In the DTV Settings menu, press ▲
or ▼ to select Subtitle And Audio, and
press to enter the submenu.
Press ▲ or ▼ to select Subtitle Type or
Audio Type and press ◄ or ► to select
Normal or Hearing Impaired.
Press ▲ or ▼ to select Digital Subtitle
Language, Digital Subtitle Language
2nd, Audio Language or Audio Language 2nd and press ◄ or ► to select
your preferred language.
Password
Change the 4-digit parental control password.
In the DTV Settings menu, press ▲ or
▼ to select Password, and press to
enter the submenu.
Select
DTV Settings
RETURN
Channels
Channel Options
Subtitle And Audio
Password
Parental
Local Time Setting
Common Interface
OK
Enter a new 4-digit password, and
re-enter the new password again to
conrm.
New Password
Confirm Password
Password
Back
OK
OK
OK
OK
OK
OK
English
Parental
This function blocks channels or programmes
that you do not want to or that you do not want
your children to watch.
A password is required to access this function.
NOTE: When Password is activated, you will
need to enter the 4-digit password before
you enter the DTV Settings submenu under the SETUP menu. After auto tuning,
all the channel blocks will be cleared.
In the DTV Settings menu, press ▲ or
▼ to select Parental, and press to
enter the submenu.
Enter the 4-digit password.
Press ◄ or ► to set the age rating from
age 4~18 or select None to turn this function off.
NOTE:
• This function is available for pro-
grammes with Age Rating information.
• It doesn’t operate according to the
country setting.
Common Interface
The Common Interface Slot, situated on the
side of the television, enables the insertion of
a CAM (Conditional Access Module) and card.
These are purchased from a service provider
and allow additional subscription broadcasts
to be viewed. For information, see a service
provider.
Insert the CAM and card into the Common
Interface Slot, following the instructions
provided with the CAM. A box will appear
on the screen to conrm that the CAM has
been inserted.
In the DTV Settings menu, press ▲
or ▼ to select Common Interface, and
press to enter the submenu.
Details of the CAM should now be available.
NOTE: The software updating of CI Plus CAM
may be automatically executed. At this
time, any Recording/Reminder programme timer will be cancelled.
25
Digital On-Screen Information and Programme Guide
English
When viewing in digital mode, the on-screen information and programme guide provide access to
programme details for all available channels.
Information
Press and the information screen
will appear giving details of the channel
and programme currently being viewed.
1 BBC Parliament
Westminster Hall
Prime Minister's Questions
Recorded coverage of questions in the House of Commons to Prime
Minister Gordon Brown from Wednesday 26 Novemder.
10:18 Sun, 30 Nov
07:00 − 11:30
News/Current.. 72 Minutes Left
11:30 − 12:00
Press ▲ or ▼ to choose from Now or
Next information guide.
On-Screen Information Icons
Icons will appear on the Information screen giving details about the programmes being broadcast. Details of these icons are listed below:
Icon Description
Service info
Audio info
Audio/
Subtitle info
Event info
Timer info
AD Audio Description
HD, SD
16:9, 4:3 Video Aspect
None or 4 - 18 Parental rating
NOTE: When country setting is France,
Parental rating is 4 -18.
Service type
(TV, Radio, TEXT)
Skip
Mono
Stereo
Dual mono
Multi Channel
Dolby Digital
Dolby Digital+
Hearing Impaired
Video format
(HD, SD)
Teletext
Subtitle
(Single, Multi)
Multi-audio track
Encrypted
Recording
Reminder
Guide
Select the on-screen guide by pressing
GUIDE. The guide screen will appear
highlighting details of the channel and
programme currently being viewed. This
may take a few moments to appear.
Press ◄ or ► for information on other
programmes scheduled for the channel
selected.
For details of other programmes cur-
rently available, press ▲ and ▼ to scroll
up and down the channel list.
NOTE: In order for the recording operation
to work properly, the media recorder
must be set to the same time as the TV.
Regarding the process for recording,
please refer to the owner’s manual of
the recording equipment.
26
General Controls
The General Controls will allow you to select channels and information, use the sound controls, personalise the picture style, and select external equipment.
English
Selecting Channels
To select a channel use the numbered buttons
on the remote control.
Channels can also be selected using P
and
P .
Stereo and Bilingual
Transmissions
If stereo or dual language broadcasts are
transmitted, the word Stereo or Dual will appear on the screen each time channels are
changed, disappearing after a few seconds. If
the broadcast is not in stereo the word Mono
will appear.
Stereo: Press
to select Stereo or Mono.
Bilingual: If a bilingual programme is offered,
the word Dual will display on screen. To
change between languages, press
to
switch between Dual 1 and Dual 2.
NOTE: In DTV mode, only the icon of the
detected audio type will appear on
screen.
Quick Access Menu
Quick access helps you access some options
quickly such as Picture Size, Picture Mode,
Sleep Timer and System Information. Press
the QUICK button to display the Quick access
menu and use ▲ or ▼ to select the option you
would like to change.
Picture Size
Picture Mode
Sleep Timer
System Information
Quick access
Wide
Standard
00:00
OK
Subtitles
If Subtitles are available for your current programme, pressing the SUBTITLE button will
toggle Subtitles select language or off.
Picture Still
This feature is used to hold a still image on
the screen. Press to hold an image on the
screen, press again to cancel.
Input Selection
Use the Input Selection feature if the TV does
not switch over automatically when using an
external device.
Pressing , a list will appear on-screen showing all external equipment.
Use ▲ or ▼ to highlight and to select.
Inputs
TV
1
2
3C
HDMI1
HDMI2
Disc Player
MEDIA
PC
HDMI® displays equipment connected to
Input HDMI on the back or the side of the
TV. It is designed for best performance with
1080i/1080p high denition signals.
NOTE: Quick access items are different
depending on the current mode.
27
English
Volume Controls and Mute Sound
Volume
Press or to adjust the volume.
Sound Mute
Press
on the remote once to turn the sound
off and again to cancel.
Dual
If a programme or lm is being broadcast with
a soundtrack in more than one language, the
DUAL feature allows selection between them.
Press MENU. Press ◄ or ► to select
SOUND and press to enter the submenu.
PICTURE
Press ▲ or ▼ to select Dual, and press
◄ or ► to choose between Dual1 or
Dual2.
SETUP APPLICATIONS PREFERENCES
SOUND
Sound Controls
Stable Sound
The Stable Sound feature limits high volume
levels in order to prevent the extreme changes
in volume that can occur when channels are
changed or a programme switches to a commercial.
Press MENU. Press ◄ or ► to select
SOUND and press to enter the submenu.
Press ▲ or ▼ to select Stable Sound,
and press ◄ or ► to select On or Off.
Surround Sound
Surround Sound enhances depth of the
sound.
Press MENU. Press ◄ or ► to select
SOUND and press to enter the submenu.
Press ▲ or ▼ to select Surround Sound,
and press ◄ or ► to select On or Off.
Edit
SOUND
RETURN
Dual1
PCM
Back
0
0
0
Off
Off
Off
OK
Dual
Bass
Treble
Balance
Stable Sound
Surround Sound
Bass Boost
SPDIF Type
Audio Description
NOTE: Dual is only available in ATV
mode.
Bass, Treble and Balance
The sound controls are accessible in digital
and analogue modes.
Press MENU. Press ◄ or ► to select
SOUND and press to enter the submenu.
Press ▲ or ▼ to select Bass, Treble or
Balance and press ◄ or ► to change the
setting.
Bass Boost
Bass Boost enhances depth of the sound.
Press MENU. Press ◄ or ► to select
SOUND and press to enter the sub-
menu.
Press ▲ or ▼ to select Bass Boost, and
press ◄ or ► to adjust the setting.
SPDIF Type
The feature allows you to select a digital audio
format.
Press MENU and press ◄ or ► to select
SOUND.
Press ▲ or ▼ to select SPDIF Type, and
press ◄ or ► to select PCM or Auto.
28
Audio Description
Audio Description is an additional narration
describing on-screen action, body language,
expressions and movements for people with
visual disabilities while watching the TV. This
function enables you to choose the type of
narrations.
Press MENU. Press ◄ or ► to select
SOUND and press to enter the submenu.
Press ▲ or ▼ to select Audio Descrip-
tion and press to enter the submenu.
Press ▲ or ▼ to select Audio Descrip-
tion, and press ◄ or ► to select On or
Off.
English
Audio Description
Mixing Level
Audio Description
Edit Back
RETURN
Press ▲ or ▼ to select Mixing Level, and
press ◄ or ► to change the setting.
NOTE: Mixing Level can only be ad-
justed when Au dio Description
is On.
NOTE: Press the AD button on the
remote control to switch the Audio
Description On or Off.
On
20
29
Loading...